1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) Overkiz SAS 2012 4 * 5 * Author: Boris BREZILLON <b.brezillon@overkiz.com> 6 */ 7 8 #include <linux/module.h> 9 #include <linux/init.h> 10 #include <linux/clocksource.h> 11 #include <linux/clockchips.h> 12 #include <linux/interrupt.h> 13 #include <linux/irq.h> 14 15 #include <linux/clk.h> 16 #include <linux/err.h> 17 #include <linux/ioport.h> 18 #include <linux/io.h> 19 #include <linux/mfd/syscon.h> 20 #include <linux/platform_device.h> 21 #include <linux/pwm.h> 22 #include <linux/of.h> 23 #include <linux/regmap.h> 24 #include <linux/slab.h> 25 #include <soc/at91/atmel_tcb.h> 26 27 #define NPWM 2 28 29 #define ATMEL_TC_ACMR_MASK (ATMEL_TC_ACPA | ATMEL_TC_ACPC | \ 30 ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG) 31 32 #define ATMEL_TC_BCMR_MASK (ATMEL_TC_BCPB | ATMEL_TC_BCPC | \ 33 ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG) 34 35 struct atmel_tcb_pwm_device { 36 unsigned div; /* PWM clock divider */ 37 unsigned duty; /* PWM duty expressed in clk cycles */ 38 unsigned period; /* PWM period expressed in clk cycles */ 39 }; 40 41 struct atmel_tcb_channel { 42 u32 enabled; 43 u32 cmr; 44 u32 ra; 45 u32 rb; 46 u32 rc; 47 }; 48 49 struct atmel_tcb_pwm_chip { 50 struct pwm_chip chip; 51 spinlock_t lock; 52 u8 channel; 53 u8 width; 54 struct regmap *regmap; 55 struct clk *clk; 56 struct clk *gclk; 57 struct clk *slow_clk; 58 struct atmel_tcb_pwm_device pwms[NPWM]; 59 struct atmel_tcb_channel bkup; 60 }; 61 62 static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128, 0, }; 63 64 static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip) 65 { 66 return container_of(chip, struct atmel_tcb_pwm_chip, chip); 67 } 68 69 static int atmel_tcb_pwm_request(struct pwm_chip *chip, 70 struct pwm_device *pwm) 71 { 72 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); 73 struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm]; 74 unsigned cmr; 75 int ret; 76 77 ret = clk_prepare_enable(tcbpwmc->clk); 78 if (ret) 79 return ret; 80 81 tcbpwm->duty = 0; 82 tcbpwm->period = 0; 83 tcbpwm->div = 0; 84 85 spin_lock(&tcbpwmc->lock); 86 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr); 87 /* 88 * Get init config from Timer Counter registers if 89 * Timer Counter is already configured as a PWM generator. 90 */ 91 if (cmr & ATMEL_TC_WAVE) { 92 if (pwm->hwpwm == 0) 93 regmap_read(tcbpwmc->regmap, 94 ATMEL_TC_REG(tcbpwmc->channel, RA), 95 &tcbpwm->duty); 96 else 97 regmap_read(tcbpwmc->regmap, 98 ATMEL_TC_REG(tcbpwmc->channel, RB), 99 &tcbpwm->duty); 100 101 tcbpwm->div = cmr & ATMEL_TC_TCCLKS; 102 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC), 103 &tcbpwm->period); 104 cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK | 105 ATMEL_TC_BCMR_MASK); 106 } else 107 cmr = 0; 108 109 cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0; 110 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr); 111 spin_unlock(&tcbpwmc->lock); 112 113 return 0; 114 } 115 116 static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) 117 { 118 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); 119 120 clk_disable_unprepare(tcbpwmc->clk); 121 } 122 123 static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm, 124 enum pwm_polarity polarity) 125 { 126 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); 127 struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm]; 128 unsigned cmr; 129 130 /* 131 * If duty is 0 the timer will be stopped and we have to 132 * configure the output correctly on software trigger: 133 * - set output to high if PWM_POLARITY_INVERSED 134 * - set output to low if PWM_POLARITY_NORMAL 135 * 136 * This is why we're reverting polarity in this case. 137 */ 138 if (tcbpwm->duty == 0) 139 polarity = !polarity; 140 141 spin_lock(&tcbpwmc->lock); 142 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr); 143 144 /* flush old setting and set the new one */ 145 if (pwm->hwpwm == 0) { 146 cmr &= ~ATMEL_TC_ACMR_MASK; 147 if (polarity == PWM_POLARITY_INVERSED) 148 cmr |= ATMEL_TC_ASWTRG_CLEAR; 149 else 150 cmr |= ATMEL_TC_ASWTRG_SET; 151 } else { 152 cmr &= ~ATMEL_TC_BCMR_MASK; 153 if (polarity == PWM_POLARITY_INVERSED) 154 cmr |= ATMEL_TC_BSWTRG_CLEAR; 155 else 156 cmr |= ATMEL_TC_BSWTRG_SET; 157 } 158 159 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr); 160 161 /* 162 * Use software trigger to apply the new setting. 163 * If both PWM devices in this group are disabled we stop the clock. 164 */ 165 if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) { 166 regmap_write(tcbpwmc->regmap, 167 ATMEL_TC_REG(tcbpwmc->channel, CCR), 168 ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS); 169 tcbpwmc->bkup.enabled = 1; 170 } else { 171 regmap_write(tcbpwmc->regmap, 172 ATMEL_TC_REG(tcbpwmc->channel, CCR), 173 ATMEL_TC_SWTRG); 174 tcbpwmc->bkup.enabled = 0; 175 } 176 177 spin_unlock(&tcbpwmc->lock); 178 } 179 180 static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm, 181 enum pwm_polarity polarity) 182 { 183 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); 184 struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm]; 185 u32 cmr; 186 187 /* 188 * If duty is 0 the timer will be stopped and we have to 189 * configure the output correctly on software trigger: 190 * - set output to high if PWM_POLARITY_INVERSED 191 * - set output to low if PWM_POLARITY_NORMAL 192 * 193 * This is why we're reverting polarity in this case. 194 */ 195 if (tcbpwm->duty == 0) 196 polarity = !polarity; 197 198 spin_lock(&tcbpwmc->lock); 199 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr); 200 201 /* flush old setting and set the new one */ 202 cmr &= ~ATMEL_TC_TCCLKS; 203 204 if (pwm->hwpwm == 0) { 205 cmr &= ~ATMEL_TC_ACMR_MASK; 206 207 /* Set CMR flags according to given polarity */ 208 if (polarity == PWM_POLARITY_INVERSED) 209 cmr |= ATMEL_TC_ASWTRG_CLEAR; 210 else 211 cmr |= ATMEL_TC_ASWTRG_SET; 212 } else { 213 cmr &= ~ATMEL_TC_BCMR_MASK; 214 if (polarity == PWM_POLARITY_INVERSED) 215 cmr |= ATMEL_TC_BSWTRG_CLEAR; 216 else 217 cmr |= ATMEL_TC_BSWTRG_SET; 218 } 219 220 /* 221 * If duty is 0 or equal to period there's no need to register 222 * a specific action on RA/RB and RC compare. 223 * The output will be configured on software trigger and keep 224 * this config till next config call. 225 */ 226 if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) { 227 if (pwm->hwpwm == 0) { 228 if (polarity == PWM_POLARITY_INVERSED) 229 cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR; 230 else 231 cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET; 232 } else { 233 if (polarity == PWM_POLARITY_INVERSED) 234 cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR; 235 else 236 cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET; 237 } 238 } 239 240 cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS); 241 242 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr); 243 244 if (pwm->hwpwm == 0) 245 regmap_write(tcbpwmc->regmap, 246 ATMEL_TC_REG(tcbpwmc->channel, RA), 247 tcbpwm->duty); 248 else 249 regmap_write(tcbpwmc->regmap, 250 ATMEL_TC_REG(tcbpwmc->channel, RB), 251 tcbpwm->duty); 252 253 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC), 254 tcbpwm->period); 255 256 /* Use software trigger to apply the new setting */ 257 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CCR), 258 ATMEL_TC_SWTRG | ATMEL_TC_CLKEN); 259 tcbpwmc->bkup.enabled = 1; 260 spin_unlock(&tcbpwmc->lock); 261 return 0; 262 } 263 264 static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, 265 int duty_ns, int period_ns) 266 { 267 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); 268 struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm]; 269 struct atmel_tcb_pwm_device *atcbpwm = NULL; 270 int i = 0; 271 int slowclk = 0; 272 unsigned period; 273 unsigned duty; 274 unsigned rate = clk_get_rate(tcbpwmc->clk); 275 unsigned long long min; 276 unsigned long long max; 277 278 /* 279 * Find best clk divisor: 280 * the smallest divisor which can fulfill the period_ns requirements. 281 * If there is a gclk, the first divisor is actually the gclk selector 282 */ 283 if (tcbpwmc->gclk) 284 i = 1; 285 for (; i < ARRAY_SIZE(atmel_tcb_divisors); ++i) { 286 if (atmel_tcb_divisors[i] == 0) { 287 slowclk = i; 288 continue; 289 } 290 min = div_u64((u64)NSEC_PER_SEC * atmel_tcb_divisors[i], rate); 291 max = min << tcbpwmc->width; 292 if (max >= period_ns) 293 break; 294 } 295 296 /* 297 * If none of the divisor are small enough to represent period_ns 298 * take slow clock (32KHz). 299 */ 300 if (i == ARRAY_SIZE(atmel_tcb_divisors)) { 301 i = slowclk; 302 rate = clk_get_rate(tcbpwmc->slow_clk); 303 min = div_u64(NSEC_PER_SEC, rate); 304 max = min << tcbpwmc->width; 305 306 /* If period is too big return ERANGE error */ 307 if (max < period_ns) 308 return -ERANGE; 309 } 310 311 duty = div_u64(duty_ns, min); 312 period = div_u64(period_ns, min); 313 314 if (pwm->hwpwm == 0) 315 atcbpwm = &tcbpwmc->pwms[1]; 316 else 317 atcbpwm = &tcbpwmc->pwms[0]; 318 319 /* 320 * PWM devices provided by the TCB driver are grouped by 2. 321 * PWM devices in a given group must be configured with the 322 * same period_ns. 323 * 324 * We're checking the period value of the second PWM device 325 * in this group before applying the new config. 326 */ 327 if ((atcbpwm && atcbpwm->duty > 0 && 328 atcbpwm->duty != atcbpwm->period) && 329 (atcbpwm->div != i || atcbpwm->period != period)) { 330 dev_err(chip->dev, 331 "failed to configure period_ns: PWM group already configured with a different value\n"); 332 return -EINVAL; 333 } 334 335 tcbpwm->period = period; 336 tcbpwm->div = i; 337 tcbpwm->duty = duty; 338 339 return 0; 340 } 341 342 static int atmel_tcb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, 343 const struct pwm_state *state) 344 { 345 int duty_cycle, period; 346 int ret; 347 348 if (!state->enabled) { 349 atmel_tcb_pwm_disable(chip, pwm, state->polarity); 350 return 0; 351 } 352 353 period = state->period < INT_MAX ? state->period : INT_MAX; 354 duty_cycle = state->duty_cycle < INT_MAX ? state->duty_cycle : INT_MAX; 355 356 ret = atmel_tcb_pwm_config(chip, pwm, duty_cycle, period); 357 if (ret) 358 return ret; 359 360 return atmel_tcb_pwm_enable(chip, pwm, state->polarity); 361 } 362 363 static const struct pwm_ops atmel_tcb_pwm_ops = { 364 .request = atmel_tcb_pwm_request, 365 .free = atmel_tcb_pwm_free, 366 .apply = atmel_tcb_pwm_apply, 367 }; 368 369 static struct atmel_tcb_config tcb_rm9200_config = { 370 .counter_width = 16, 371 }; 372 373 static struct atmel_tcb_config tcb_sam9x5_config = { 374 .counter_width = 32, 375 }; 376 377 static struct atmel_tcb_config tcb_sama5d2_config = { 378 .counter_width = 32, 379 .has_gclk = 1, 380 }; 381 382 static const struct of_device_id atmel_tcb_of_match[] = { 383 { .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, }, 384 { .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, }, 385 { .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, }, 386 { /* sentinel */ } 387 }; 388 389 static int atmel_tcb_pwm_probe(struct platform_device *pdev) 390 { 391 const struct of_device_id *match; 392 struct atmel_tcb_pwm_chip *tcbpwm; 393 const struct atmel_tcb_config *config; 394 struct device_node *np = pdev->dev.of_node; 395 char clk_name[] = "t0_clk"; 396 int err; 397 int channel; 398 399 tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL); 400 if (tcbpwm == NULL) 401 return -ENOMEM; 402 403 err = of_property_read_u32(np, "reg", &channel); 404 if (err < 0) { 405 dev_err(&pdev->dev, 406 "failed to get Timer Counter Block channel from device tree (error: %d)\n", 407 err); 408 return err; 409 } 410 411 tcbpwm->regmap = syscon_node_to_regmap(np->parent); 412 if (IS_ERR(tcbpwm->regmap)) 413 return PTR_ERR(tcbpwm->regmap); 414 415 tcbpwm->slow_clk = of_clk_get_by_name(np->parent, "slow_clk"); 416 if (IS_ERR(tcbpwm->slow_clk)) 417 return PTR_ERR(tcbpwm->slow_clk); 418 419 clk_name[1] += channel; 420 tcbpwm->clk = of_clk_get_by_name(np->parent, clk_name); 421 if (IS_ERR(tcbpwm->clk)) 422 tcbpwm->clk = of_clk_get_by_name(np->parent, "t0_clk"); 423 if (IS_ERR(tcbpwm->clk)) { 424 err = PTR_ERR(tcbpwm->clk); 425 goto err_slow_clk; 426 } 427 428 match = of_match_node(atmel_tcb_of_match, np->parent); 429 config = match->data; 430 431 if (config->has_gclk) { 432 tcbpwm->gclk = of_clk_get_by_name(np->parent, "gclk"); 433 if (IS_ERR(tcbpwm->gclk)) { 434 err = PTR_ERR(tcbpwm->gclk); 435 goto err_clk; 436 } 437 } 438 439 tcbpwm->chip.dev = &pdev->dev; 440 tcbpwm->chip.ops = &atmel_tcb_pwm_ops; 441 tcbpwm->chip.npwm = NPWM; 442 tcbpwm->channel = channel; 443 tcbpwm->width = config->counter_width; 444 445 err = clk_prepare_enable(tcbpwm->slow_clk); 446 if (err) 447 goto err_gclk; 448 449 spin_lock_init(&tcbpwm->lock); 450 451 err = pwmchip_add(&tcbpwm->chip); 452 if (err < 0) 453 goto err_disable_clk; 454 455 platform_set_drvdata(pdev, tcbpwm); 456 457 return 0; 458 459 err_disable_clk: 460 clk_disable_unprepare(tcbpwm->slow_clk); 461 462 err_gclk: 463 clk_put(tcbpwm->gclk); 464 465 err_clk: 466 clk_put(tcbpwm->clk); 467 468 err_slow_clk: 469 clk_put(tcbpwm->slow_clk); 470 471 return err; 472 } 473 474 static void atmel_tcb_pwm_remove(struct platform_device *pdev) 475 { 476 struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev); 477 478 pwmchip_remove(&tcbpwm->chip); 479 480 clk_disable_unprepare(tcbpwm->slow_clk); 481 clk_put(tcbpwm->gclk); 482 clk_put(tcbpwm->clk); 483 clk_put(tcbpwm->slow_clk); 484 } 485 486 static const struct of_device_id atmel_tcb_pwm_dt_ids[] = { 487 { .compatible = "atmel,tcb-pwm", }, 488 { /* sentinel */ } 489 }; 490 MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids); 491 492 #ifdef CONFIG_PM_SLEEP 493 static int atmel_tcb_pwm_suspend(struct device *dev) 494 { 495 struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev); 496 struct atmel_tcb_channel *chan = &tcbpwm->bkup; 497 unsigned int channel = tcbpwm->channel; 498 499 regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, CMR), &chan->cmr); 500 regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RA), &chan->ra); 501 regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RB), &chan->rb); 502 regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RC), &chan->rc); 503 504 return 0; 505 } 506 507 static int atmel_tcb_pwm_resume(struct device *dev) 508 { 509 struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev); 510 struct atmel_tcb_channel *chan = &tcbpwm->bkup; 511 unsigned int channel = tcbpwm->channel; 512 513 regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, CMR), chan->cmr); 514 regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RA), chan->ra); 515 regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RB), chan->rb); 516 regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RC), chan->rc); 517 518 if (chan->enabled) 519 regmap_write(tcbpwm->regmap, 520 ATMEL_TC_CLKEN | ATMEL_TC_SWTRG, 521 ATMEL_TC_REG(channel, CCR)); 522 523 return 0; 524 } 525 #endif 526 527 static SIMPLE_DEV_PM_OPS(atmel_tcb_pwm_pm_ops, atmel_tcb_pwm_suspend, 528 atmel_tcb_pwm_resume); 529 530 static struct platform_driver atmel_tcb_pwm_driver = { 531 .driver = { 532 .name = "atmel-tcb-pwm", 533 .of_match_table = atmel_tcb_pwm_dt_ids, 534 .pm = &atmel_tcb_pwm_pm_ops, 535 }, 536 .probe = atmel_tcb_pwm_probe, 537 .remove_new = atmel_tcb_pwm_remove, 538 }; 539 module_platform_driver(atmel_tcb_pwm_driver); 540 541 MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>"); 542 MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver"); 543 MODULE_LICENSE("GPL v2"); 544