xref: /linux/drivers/ptp/Kconfig (revision b7019ac550eb3916f34d79db583e9b7ea2524afa)
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# PTP clock support configuration
4#
5
6menu "PTP clock support"
7
8config PTP_1588_CLOCK
9	tristate "PTP clock support"
10	depends on NET && POSIX_TIMERS
11	select PPS
12	select NET_PTP_CLASSIFY
13	help
14	  The IEEE 1588 standard defines a method to precisely
15	  synchronize distributed clocks over Ethernet networks. The
16	  standard defines a Precision Time Protocol (PTP), which can
17	  be used to achieve synchronization within a few dozen
18	  microseconds. In addition, with the help of special hardware
19	  time stamping units, it can be possible to achieve
20	  synchronization to within a few hundred nanoseconds.
21
22	  This driver adds support for PTP clocks as character
23	  devices. If you want to use a PTP clock, then you should
24	  also enable at least one clock driver as well.
25
26	  To compile this driver as a module, choose M here: the module
27	  will be called ptp.
28
29config PTP_1588_CLOCK_DTE
30	tristate "Broadcom DTE as PTP clock"
31	depends on PTP_1588_CLOCK
32	depends on NET && HAS_IOMEM
33	depends on ARCH_BCM_MOBILE || (ARCH_BCM_IPROC && !(ARCH_BCM_NSP || ARCH_BCM_5301X)) || COMPILE_TEST
34	default y
35	help
36	  This driver adds support for using the Digital timing engine
37	  (DTE) in the Broadcom SoC's as a PTP clock.
38
39	  The clock can be used in both wired and wireless networks
40	  for PTP purposes.
41
42	  To compile this driver as a module, choose M here: the module
43	  will be called ptp_dte.
44
45config PTP_1588_CLOCK_QORIQ
46	tristate "Freescale QorIQ 1588 timer as PTP clock"
47	depends on GIANFAR || FSL_DPAA_ETH || FSL_ENETC || FSL_ENETC_VF
48	depends on PTP_1588_CLOCK
49	default y
50	help
51	  This driver adds support for using the Freescale QorIQ 1588
52	  timer as a PTP clock. This clock is only useful if your PTP
53	  programs are getting hardware time stamps on the PTP Ethernet
54	  packets using the SO_TIMESTAMPING API.
55
56	  To compile this driver as a module, choose M here: the module
57	  will be called ptp-qoriq.
58
59config PTP_1588_CLOCK_IXP46X
60	tristate "Intel IXP46x as PTP clock"
61	depends on IXP4XX_ETH
62	depends on PTP_1588_CLOCK
63	default y
64	help
65	  This driver adds support for using the IXP46X as a PTP
66	  clock. This clock is only useful if your PTP programs are
67	  getting hardware time stamps on the PTP Ethernet packets
68	  using the SO_TIMESTAMPING API.
69
70	  To compile this driver as a module, choose M here: the module
71	  will be called ptp_ixp46x.
72
73comment "Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks."
74	depends on PHYLIB=n || NETWORK_PHY_TIMESTAMPING=n
75
76config DP83640_PHY
77	tristate "Driver for the National Semiconductor DP83640 PHYTER"
78	depends on NETWORK_PHY_TIMESTAMPING
79	depends on PHYLIB
80	depends on PTP_1588_CLOCK
81	---help---
82	  Supports the DP83640 PHYTER with IEEE 1588 features.
83
84	  This driver adds support for using the DP83640 as a PTP
85	  clock. This clock is only useful if your PTP programs are
86	  getting hardware time stamps on the PTP Ethernet packets
87	  using the SO_TIMESTAMPING API.
88
89	  In order for this to work, your MAC driver must also
90	  implement the skb_tx_timestamp() function.
91
92config PTP_1588_CLOCK_PCH
93	tristate "Intel PCH EG20T as PTP clock"
94	depends on X86_32 || COMPILE_TEST
95	depends on HAS_IOMEM && NET
96	imply PTP_1588_CLOCK
97	help
98	  This driver adds support for using the PCH EG20T as a PTP
99	  clock. The hardware supports time stamping of PTP packets
100	  when using the end-to-end delay (E2E) mechansim. The peer
101	  delay mechansim (P2P) is not supported.
102
103	  This clock is only useful if your PTP programs are getting
104	  hardware time stamps on the PTP Ethernet packets using the
105	  SO_TIMESTAMPING API.
106
107	  To compile this driver as a module, choose M here: the module
108	  will be called ptp_pch.
109
110config PTP_1588_CLOCK_KVM
111	tristate "KVM virtual PTP clock"
112	depends on PTP_1588_CLOCK
113	depends on KVM_GUEST && X86
114	default y
115	help
116	  This driver adds support for using kvm infrastructure as a PTP
117	  clock. This clock is only useful if you are using KVM guests.
118
119	  To compile this driver as a module, choose M here: the module
120	  will be called ptp_kvm.
121
122endmenu
123