xref: /linux/drivers/pps/clients/pps-gpio.c (revision 4b132aacb0768ac1e652cf517097ea6f237214b9)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * pps-gpio.c -- PPS client driver using GPIO
4  *
5  * Copyright (C) 2010 Ricardo Martins <rasm@fe.up.pt>
6  * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca>
7  */
8 
9 #define PPS_GPIO_NAME "pps-gpio"
10 #define pr_fmt(fmt) PPS_GPIO_NAME ": " fmt
11 
12 #include <linux/init.h>
13 #include <linux/kernel.h>
14 #include <linux/interrupt.h>
15 #include <linux/mod_devicetable.h>
16 #include <linux/module.h>
17 #include <linux/platform_device.h>
18 #include <linux/slab.h>
19 #include <linux/pps_kernel.h>
20 #include <linux/gpio/consumer.h>
21 #include <linux/list.h>
22 #include <linux/property.h>
23 #include <linux/timer.h>
24 #include <linux/jiffies.h>
25 
26 /* Info for each registered platform device */
27 struct pps_gpio_device_data {
28 	int irq;			/* IRQ used as PPS source */
29 	struct pps_device *pps;		/* PPS source device */
30 	struct pps_source_info info;	/* PPS source information */
31 	struct gpio_desc *gpio_pin;	/* GPIO port descriptors */
32 	struct gpio_desc *echo_pin;
33 	struct timer_list echo_timer;	/* timer to reset echo active state */
34 	bool assert_falling_edge;
35 	bool capture_clear;
36 	unsigned int echo_active_ms;	/* PPS echo active duration */
37 	unsigned long echo_timeout;	/* timer timeout value in jiffies */
38 };
39 
40 /*
41  * Report the PPS event
42  */
43 
44 static irqreturn_t pps_gpio_irq_handler(int irq, void *data)
45 {
46 	const struct pps_gpio_device_data *info;
47 	struct pps_event_time ts;
48 	int rising_edge;
49 
50 	/* Get the time stamp first */
51 	pps_get_ts(&ts);
52 
53 	info = data;
54 
55 	rising_edge = gpiod_get_value(info->gpio_pin);
56 	if ((rising_edge && !info->assert_falling_edge) ||
57 			(!rising_edge && info->assert_falling_edge))
58 		pps_event(info->pps, &ts, PPS_CAPTUREASSERT, data);
59 	else if (info->capture_clear &&
60 			((rising_edge && info->assert_falling_edge) ||
61 			(!rising_edge && !info->assert_falling_edge)))
62 		pps_event(info->pps, &ts, PPS_CAPTURECLEAR, data);
63 
64 	return IRQ_HANDLED;
65 }
66 
67 /* This function will only be called when an ECHO GPIO is defined */
68 static void pps_gpio_echo(struct pps_device *pps, int event, void *data)
69 {
70 	/* add_timer() needs to write into info->echo_timer */
71 	struct pps_gpio_device_data *info = data;
72 
73 	switch (event) {
74 	case PPS_CAPTUREASSERT:
75 		if (pps->params.mode & PPS_ECHOASSERT)
76 			gpiod_set_value(info->echo_pin, 1);
77 		break;
78 
79 	case PPS_CAPTURECLEAR:
80 		if (pps->params.mode & PPS_ECHOCLEAR)
81 			gpiod_set_value(info->echo_pin, 1);
82 		break;
83 	}
84 
85 	/* fire the timer */
86 	if (info->pps->params.mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)) {
87 		info->echo_timer.expires = jiffies + info->echo_timeout;
88 		add_timer(&info->echo_timer);
89 	}
90 }
91 
92 /* Timer callback to reset the echo pin to the inactive state */
93 static void pps_gpio_echo_timer_callback(struct timer_list *t)
94 {
95 	const struct pps_gpio_device_data *info;
96 
97 	info = from_timer(info, t, echo_timer);
98 
99 	gpiod_set_value(info->echo_pin, 0);
100 }
101 
102 static int pps_gpio_setup(struct device *dev)
103 {
104 	struct pps_gpio_device_data *data = dev_get_drvdata(dev);
105 	int ret;
106 	u32 value;
107 
108 	data->gpio_pin = devm_gpiod_get(dev, NULL, GPIOD_IN);
109 	if (IS_ERR(data->gpio_pin))
110 		return dev_err_probe(dev, PTR_ERR(data->gpio_pin),
111 				     "failed to request PPS GPIO\n");
112 
113 	data->assert_falling_edge =
114 		device_property_read_bool(dev, "assert-falling-edge");
115 
116 	data->echo_pin = devm_gpiod_get_optional(dev, "echo", GPIOD_OUT_LOW);
117 	if (IS_ERR(data->echo_pin))
118 		return dev_err_probe(dev, PTR_ERR(data->echo_pin),
119 				     "failed to request ECHO GPIO\n");
120 
121 	if (!data->echo_pin)
122 		return 0;
123 
124 	ret = device_property_read_u32(dev, "echo-active-ms", &value);
125 	if (ret) {
126 		dev_err(dev, "failed to get echo-active-ms from FW\n");
127 		return ret;
128 	}
129 
130 	/* sanity check on echo_active_ms */
131 	if (!value || value > 999) {
132 		dev_err(dev, "echo-active-ms: %u - bad value from FW\n", value);
133 		return -EINVAL;
134 	}
135 
136 	data->echo_active_ms = value;
137 
138 	return 0;
139 }
140 
141 static unsigned long
142 get_irqf_trigger_flags(const struct pps_gpio_device_data *data)
143 {
144 	unsigned long flags = data->assert_falling_edge ?
145 		IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
146 
147 	if (data->capture_clear) {
148 		flags |= ((flags & IRQF_TRIGGER_RISING) ?
149 				IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING);
150 	}
151 
152 	return flags;
153 }
154 
155 static int pps_gpio_probe(struct platform_device *pdev)
156 {
157 	struct pps_gpio_device_data *data;
158 	struct device *dev = &pdev->dev;
159 	int ret;
160 	int pps_default_params;
161 
162 	/* allocate space for device info */
163 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
164 	if (!data)
165 		return -ENOMEM;
166 
167 	dev_set_drvdata(dev, data);
168 
169 	/* GPIO setup */
170 	ret = pps_gpio_setup(dev);
171 	if (ret)
172 		return ret;
173 
174 	/* IRQ setup */
175 	ret = gpiod_to_irq(data->gpio_pin);
176 	if (ret < 0) {
177 		dev_err(dev, "failed to map GPIO to IRQ: %d\n", ret);
178 		return -EINVAL;
179 	}
180 	data->irq = ret;
181 
182 	/* initialize PPS specific parts of the bookkeeping data structure. */
183 	data->info.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT |
184 		PPS_ECHOASSERT | PPS_CANWAIT | PPS_TSFMT_TSPEC;
185 	if (data->capture_clear)
186 		data->info.mode |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR |
187 			PPS_ECHOCLEAR;
188 	data->info.owner = THIS_MODULE;
189 	snprintf(data->info.name, PPS_MAX_NAME_LEN - 1, "%s.%d",
190 		 pdev->name, pdev->id);
191 	if (data->echo_pin) {
192 		data->info.echo = pps_gpio_echo;
193 		data->echo_timeout = msecs_to_jiffies(data->echo_active_ms);
194 		timer_setup(&data->echo_timer, pps_gpio_echo_timer_callback, 0);
195 	}
196 
197 	/* register PPS source */
198 	pps_default_params = PPS_CAPTUREASSERT | PPS_OFFSETASSERT;
199 	if (data->capture_clear)
200 		pps_default_params |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR;
201 	data->pps = pps_register_source(&data->info, pps_default_params);
202 	if (IS_ERR(data->pps)) {
203 		dev_err(dev, "failed to register IRQ %d as PPS source\n",
204 			data->irq);
205 		return PTR_ERR(data->pps);
206 	}
207 
208 	/* register IRQ interrupt handler */
209 	ret = devm_request_irq(dev, data->irq, pps_gpio_irq_handler,
210 			get_irqf_trigger_flags(data), data->info.name, data);
211 	if (ret) {
212 		pps_unregister_source(data->pps);
213 		dev_err(dev, "failed to acquire IRQ %d\n", data->irq);
214 		return -EINVAL;
215 	}
216 
217 	dev_info(data->pps->dev, "Registered IRQ %d as PPS source\n",
218 		 data->irq);
219 
220 	return 0;
221 }
222 
223 static void pps_gpio_remove(struct platform_device *pdev)
224 {
225 	struct pps_gpio_device_data *data = platform_get_drvdata(pdev);
226 
227 	pps_unregister_source(data->pps);
228 	del_timer_sync(&data->echo_timer);
229 	/* reset echo pin in any case */
230 	gpiod_set_value(data->echo_pin, 0);
231 	dev_info(&pdev->dev, "removed IRQ %d as PPS source\n", data->irq);
232 }
233 
234 static const struct of_device_id pps_gpio_dt_ids[] = {
235 	{ .compatible = "pps-gpio", },
236 	{ /* sentinel */ }
237 };
238 MODULE_DEVICE_TABLE(of, pps_gpio_dt_ids);
239 
240 static struct platform_driver pps_gpio_driver = {
241 	.probe		= pps_gpio_probe,
242 	.remove_new	= pps_gpio_remove,
243 	.driver		= {
244 		.name	= PPS_GPIO_NAME,
245 		.of_match_table	= pps_gpio_dt_ids,
246 	},
247 };
248 
249 module_platform_driver(pps_gpio_driver);
250 MODULE_AUTHOR("Ricardo Martins <rasm@fe.up.pt>");
251 MODULE_AUTHOR("James Nuss <jamesnuss@nanometrics.ca>");
252 MODULE_DESCRIPTION("Use GPIO pin as PPS source");
253 MODULE_LICENSE("GPL");
254 MODULE_VERSION("1.2.0");
255