1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Common code for Intel Running Average Power Limit (RAPL) support. 4 * Copyright (c) 2019, Intel Corporation. 5 */ 6 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 7 8 #include <linux/cleanup.h> 9 #include <linux/kernel.h> 10 #include <linux/module.h> 11 #include <linux/list.h> 12 #include <linux/types.h> 13 #include <linux/device.h> 14 #include <linux/slab.h> 15 #include <linux/log2.h> 16 #include <linux/bitmap.h> 17 #include <linux/delay.h> 18 #include <linux/sysfs.h> 19 #include <linux/cpu.h> 20 #include <linux/powercap.h> 21 #include <linux/suspend.h> 22 #include <linux/intel_rapl.h> 23 #include <linux/processor.h> 24 #include <linux/platform_device.h> 25 26 #include <asm/iosf_mbi.h> 27 #include <asm/cpu_device_id.h> 28 #include <asm/intel-family.h> 29 30 /* bitmasks for RAPL MSRs, used by primitive access functions */ 31 #define ENERGY_STATUS_MASK 0xffffffff 32 33 #define POWER_LIMIT1_MASK 0x7FFF 34 #define POWER_LIMIT1_ENABLE BIT(15) 35 #define POWER_LIMIT1_CLAMP BIT(16) 36 37 #define POWER_LIMIT2_MASK (0x7FFFULL<<32) 38 #define POWER_LIMIT2_ENABLE BIT_ULL(47) 39 #define POWER_LIMIT2_CLAMP BIT_ULL(48) 40 #define POWER_HIGH_LOCK BIT_ULL(63) 41 #define POWER_LOW_LOCK BIT(31) 42 43 #define POWER_LIMIT4_MASK 0x1FFF 44 45 #define TIME_WINDOW1_MASK (0x7FULL<<17) 46 #define TIME_WINDOW2_MASK (0x7FULL<<49) 47 48 #define POWER_UNIT_OFFSET 0 49 #define POWER_UNIT_MASK 0x0F 50 51 #define ENERGY_UNIT_OFFSET 0x08 52 #define ENERGY_UNIT_MASK 0x1F00 53 54 #define TIME_UNIT_OFFSET 0x10 55 #define TIME_UNIT_MASK 0xF0000 56 57 #define POWER_INFO_MAX_MASK (0x7fffULL<<32) 58 #define POWER_INFO_MIN_MASK (0x7fffULL<<16) 59 #define POWER_INFO_MAX_TIME_WIN_MASK (0x3fULL<<48) 60 #define POWER_INFO_THERMAL_SPEC_MASK 0x7fff 61 62 #define PERF_STATUS_THROTTLE_TIME_MASK 0xffffffff 63 #define PP_POLICY_MASK 0x1F 64 65 /* 66 * SPR has different layout for Psys Domain PowerLimit registers. 67 * There are 17 bits of PL1 and PL2 instead of 15 bits. 68 * The Enable bits and TimeWindow bits are also shifted as a result. 69 */ 70 #define PSYS_POWER_LIMIT1_MASK 0x1FFFF 71 #define PSYS_POWER_LIMIT1_ENABLE BIT(17) 72 73 #define PSYS_POWER_LIMIT2_MASK (0x1FFFFULL<<32) 74 #define PSYS_POWER_LIMIT2_ENABLE BIT_ULL(49) 75 76 #define PSYS_TIME_WINDOW1_MASK (0x7FULL<<19) 77 #define PSYS_TIME_WINDOW2_MASK (0x7FULL<<51) 78 79 /* bitmasks for RAPL TPMI, used by primitive access functions */ 80 #define TPMI_POWER_LIMIT_MASK 0x3FFFF 81 #define TPMI_POWER_LIMIT_ENABLE BIT_ULL(62) 82 #define TPMI_TIME_WINDOW_MASK (0x7FULL<<18) 83 #define TPMI_INFO_SPEC_MASK 0x3FFFF 84 #define TPMI_INFO_MIN_MASK (0x3FFFFULL << 18) 85 #define TPMI_INFO_MAX_MASK (0x3FFFFULL << 36) 86 #define TPMI_INFO_MAX_TIME_WIN_MASK (0x7FULL << 54) 87 88 /* Non HW constants */ 89 #define RAPL_PRIMITIVE_DERIVED BIT(1) /* not from raw data */ 90 #define RAPL_PRIMITIVE_DUMMY BIT(2) 91 92 #define TIME_WINDOW_MAX_MSEC 40000 93 #define TIME_WINDOW_MIN_MSEC 250 94 #define ENERGY_UNIT_SCALE 1000 /* scale from driver unit to powercap unit */ 95 enum unit_type { 96 ARBITRARY_UNIT, /* no translation */ 97 POWER_UNIT, 98 ENERGY_UNIT, 99 TIME_UNIT, 100 }; 101 102 /* per domain data, some are optional */ 103 #define NR_RAW_PRIMITIVES (NR_RAPL_PRIMITIVES - 2) 104 105 #define DOMAIN_STATE_INACTIVE BIT(0) 106 #define DOMAIN_STATE_POWER_LIMIT_SET BIT(1) 107 108 static const char *pl_names[NR_POWER_LIMITS] = { 109 [POWER_LIMIT1] = "long_term", 110 [POWER_LIMIT2] = "short_term", 111 [POWER_LIMIT4] = "peak_power", 112 }; 113 114 enum pl_prims { 115 PL_ENABLE, 116 PL_CLAMP, 117 PL_LIMIT, 118 PL_TIME_WINDOW, 119 PL_MAX_POWER, 120 PL_LOCK, 121 }; 122 123 static bool is_pl_valid(struct rapl_domain *rd, int pl) 124 { 125 if (pl < POWER_LIMIT1 || pl > POWER_LIMIT4) 126 return false; 127 return rd->rpl[pl].name ? true : false; 128 } 129 130 static int get_pl_lock_prim(struct rapl_domain *rd, int pl) 131 { 132 if (rd->rp->priv->type == RAPL_IF_TPMI) { 133 if (pl == POWER_LIMIT1) 134 return PL1_LOCK; 135 if (pl == POWER_LIMIT2) 136 return PL2_LOCK; 137 if (pl == POWER_LIMIT4) 138 return PL4_LOCK; 139 } 140 141 /* MSR/MMIO Interface doesn't have Lock bit for PL4 */ 142 if (pl == POWER_LIMIT4) 143 return -EINVAL; 144 145 /* 146 * Power Limit register that supports two power limits has a different 147 * bit position for the Lock bit. 148 */ 149 if (rd->rp->priv->limits[rd->id] & BIT(POWER_LIMIT2)) 150 return FW_HIGH_LOCK; 151 return FW_LOCK; 152 } 153 154 static int get_pl_prim(struct rapl_domain *rd, int pl, enum pl_prims prim) 155 { 156 switch (pl) { 157 case POWER_LIMIT1: 158 if (prim == PL_ENABLE) 159 return PL1_ENABLE; 160 if (prim == PL_CLAMP && rd->rp->priv->type != RAPL_IF_TPMI) 161 return PL1_CLAMP; 162 if (prim == PL_LIMIT) 163 return POWER_LIMIT1; 164 if (prim == PL_TIME_WINDOW) 165 return TIME_WINDOW1; 166 if (prim == PL_MAX_POWER) 167 return THERMAL_SPEC_POWER; 168 if (prim == PL_LOCK) 169 return get_pl_lock_prim(rd, pl); 170 return -EINVAL; 171 case POWER_LIMIT2: 172 if (prim == PL_ENABLE) 173 return PL2_ENABLE; 174 if (prim == PL_CLAMP && rd->rp->priv->type != RAPL_IF_TPMI) 175 return PL2_CLAMP; 176 if (prim == PL_LIMIT) 177 return POWER_LIMIT2; 178 if (prim == PL_TIME_WINDOW) 179 return TIME_WINDOW2; 180 if (prim == PL_MAX_POWER) 181 return MAX_POWER; 182 if (prim == PL_LOCK) 183 return get_pl_lock_prim(rd, pl); 184 return -EINVAL; 185 case POWER_LIMIT4: 186 if (prim == PL_LIMIT) 187 return POWER_LIMIT4; 188 if (prim == PL_ENABLE) 189 return PL4_ENABLE; 190 /* PL4 would be around two times PL2, use same prim as PL2. */ 191 if (prim == PL_MAX_POWER) 192 return MAX_POWER; 193 if (prim == PL_LOCK) 194 return get_pl_lock_prim(rd, pl); 195 return -EINVAL; 196 default: 197 return -EINVAL; 198 } 199 } 200 201 #define power_zone_to_rapl_domain(_zone) \ 202 container_of(_zone, struct rapl_domain, power_zone) 203 204 struct rapl_defaults { 205 u8 floor_freq_reg_addr; 206 int (*check_unit)(struct rapl_domain *rd); 207 void (*set_floor_freq)(struct rapl_domain *rd, bool mode); 208 u64 (*compute_time_window)(struct rapl_domain *rd, u64 val, 209 bool to_raw); 210 unsigned int dram_domain_energy_unit; 211 unsigned int psys_domain_energy_unit; 212 bool spr_psys_bits; 213 }; 214 static struct rapl_defaults *defaults_msr; 215 static const struct rapl_defaults defaults_tpmi; 216 217 static struct rapl_defaults *get_defaults(struct rapl_package *rp) 218 { 219 return rp->priv->defaults; 220 } 221 222 /* Sideband MBI registers */ 223 #define IOSF_CPU_POWER_BUDGET_CTL_BYT (0x2) 224 #define IOSF_CPU_POWER_BUDGET_CTL_TNG (0xdf) 225 226 #define PACKAGE_PLN_INT_SAVED BIT(0) 227 #define MAX_PRIM_NAME (32) 228 229 /* per domain data. used to describe individual knobs such that access function 230 * can be consolidated into one instead of many inline functions. 231 */ 232 struct rapl_primitive_info { 233 const char *name; 234 u64 mask; 235 int shift; 236 enum rapl_domain_reg_id id; 237 enum unit_type unit; 238 u32 flag; 239 }; 240 241 #define PRIMITIVE_INFO_INIT(p, m, s, i, u, f) { \ 242 .name = #p, \ 243 .mask = m, \ 244 .shift = s, \ 245 .id = i, \ 246 .unit = u, \ 247 .flag = f \ 248 } 249 250 static void rapl_init_domains(struct rapl_package *rp); 251 static int rapl_read_data_raw(struct rapl_domain *rd, 252 enum rapl_primitives prim, 253 bool xlate, u64 *data); 254 static int rapl_write_data_raw(struct rapl_domain *rd, 255 enum rapl_primitives prim, 256 unsigned long long value); 257 static int rapl_read_pl_data(struct rapl_domain *rd, int pl, 258 enum pl_prims pl_prim, 259 bool xlate, u64 *data); 260 static int rapl_write_pl_data(struct rapl_domain *rd, int pl, 261 enum pl_prims pl_prim, 262 unsigned long long value); 263 static u64 rapl_unit_xlate(struct rapl_domain *rd, 264 enum unit_type type, u64 value, int to_raw); 265 static void package_power_limit_irq_save(struct rapl_package *rp); 266 267 static LIST_HEAD(rapl_packages); /* guarded by CPU hotplug lock */ 268 269 static const char *const rapl_domain_names[] = { 270 "package", 271 "core", 272 "uncore", 273 "dram", 274 "psys", 275 }; 276 277 static int get_energy_counter(struct powercap_zone *power_zone, 278 u64 *energy_raw) 279 { 280 struct rapl_domain *rd; 281 u64 energy_now; 282 283 /* prevent CPU hotplug, make sure the RAPL domain does not go 284 * away while reading the counter. 285 */ 286 cpus_read_lock(); 287 rd = power_zone_to_rapl_domain(power_zone); 288 289 if (!rapl_read_data_raw(rd, ENERGY_COUNTER, true, &energy_now)) { 290 *energy_raw = energy_now; 291 cpus_read_unlock(); 292 293 return 0; 294 } 295 cpus_read_unlock(); 296 297 return -EIO; 298 } 299 300 static int get_max_energy_counter(struct powercap_zone *pcd_dev, u64 *energy) 301 { 302 struct rapl_domain *rd = power_zone_to_rapl_domain(pcd_dev); 303 304 *energy = rapl_unit_xlate(rd, ENERGY_UNIT, ENERGY_STATUS_MASK, 0); 305 return 0; 306 } 307 308 static int release_zone(struct powercap_zone *power_zone) 309 { 310 struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone); 311 struct rapl_package *rp = rd->rp; 312 313 /* package zone is the last zone of a package, we can free 314 * memory here since all children has been unregistered. 315 */ 316 if (rd->id == RAPL_DOMAIN_PACKAGE) { 317 kfree(rd); 318 rp->domains = NULL; 319 } 320 321 return 0; 322 323 } 324 325 static int find_nr_power_limit(struct rapl_domain *rd) 326 { 327 int i, nr_pl = 0; 328 329 for (i = 0; i < NR_POWER_LIMITS; i++) { 330 if (is_pl_valid(rd, i)) 331 nr_pl++; 332 } 333 334 return nr_pl; 335 } 336 337 static int set_domain_enable(struct powercap_zone *power_zone, bool mode) 338 { 339 struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone); 340 struct rapl_defaults *defaults = get_defaults(rd->rp); 341 int ret; 342 343 cpus_read_lock(); 344 ret = rapl_write_pl_data(rd, POWER_LIMIT1, PL_ENABLE, mode); 345 if (!ret && defaults->set_floor_freq) 346 defaults->set_floor_freq(rd, mode); 347 cpus_read_unlock(); 348 349 return ret; 350 } 351 352 static int get_domain_enable(struct powercap_zone *power_zone, bool *mode) 353 { 354 struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone); 355 u64 val; 356 int ret; 357 358 if (rd->rpl[POWER_LIMIT1].locked) { 359 *mode = false; 360 return 0; 361 } 362 cpus_read_lock(); 363 ret = rapl_read_pl_data(rd, POWER_LIMIT1, PL_ENABLE, true, &val); 364 if (!ret) 365 *mode = val; 366 cpus_read_unlock(); 367 368 return ret; 369 } 370 371 /* per RAPL domain ops, in the order of rapl_domain_type */ 372 static const struct powercap_zone_ops zone_ops[] = { 373 /* RAPL_DOMAIN_PACKAGE */ 374 { 375 .get_energy_uj = get_energy_counter, 376 .get_max_energy_range_uj = get_max_energy_counter, 377 .release = release_zone, 378 .set_enable = set_domain_enable, 379 .get_enable = get_domain_enable, 380 }, 381 /* RAPL_DOMAIN_PP0 */ 382 { 383 .get_energy_uj = get_energy_counter, 384 .get_max_energy_range_uj = get_max_energy_counter, 385 .release = release_zone, 386 .set_enable = set_domain_enable, 387 .get_enable = get_domain_enable, 388 }, 389 /* RAPL_DOMAIN_PP1 */ 390 { 391 .get_energy_uj = get_energy_counter, 392 .get_max_energy_range_uj = get_max_energy_counter, 393 .release = release_zone, 394 .set_enable = set_domain_enable, 395 .get_enable = get_domain_enable, 396 }, 397 /* RAPL_DOMAIN_DRAM */ 398 { 399 .get_energy_uj = get_energy_counter, 400 .get_max_energy_range_uj = get_max_energy_counter, 401 .release = release_zone, 402 .set_enable = set_domain_enable, 403 .get_enable = get_domain_enable, 404 }, 405 /* RAPL_DOMAIN_PLATFORM */ 406 { 407 .get_energy_uj = get_energy_counter, 408 .get_max_energy_range_uj = get_max_energy_counter, 409 .release = release_zone, 410 .set_enable = set_domain_enable, 411 .get_enable = get_domain_enable, 412 }, 413 }; 414 415 /* 416 * Constraint index used by powercap can be different than power limit (PL) 417 * index in that some PLs maybe missing due to non-existent MSRs. So we 418 * need to convert here by finding the valid PLs only (name populated). 419 */ 420 static int contraint_to_pl(struct rapl_domain *rd, int cid) 421 { 422 int i, j; 423 424 for (i = POWER_LIMIT1, j = 0; i < NR_POWER_LIMITS; i++) { 425 if (is_pl_valid(rd, i) && j++ == cid) { 426 pr_debug("%s: index %d\n", __func__, i); 427 return i; 428 } 429 } 430 pr_err("Cannot find matching power limit for constraint %d\n", cid); 431 432 return -EINVAL; 433 } 434 435 static int set_power_limit(struct powercap_zone *power_zone, int cid, 436 u64 power_limit) 437 { 438 struct rapl_domain *rd; 439 struct rapl_package *rp; 440 int ret = 0; 441 int id; 442 443 cpus_read_lock(); 444 rd = power_zone_to_rapl_domain(power_zone); 445 id = contraint_to_pl(rd, cid); 446 rp = rd->rp; 447 448 ret = rapl_write_pl_data(rd, id, PL_LIMIT, power_limit); 449 if (!ret) 450 package_power_limit_irq_save(rp); 451 cpus_read_unlock(); 452 return ret; 453 } 454 455 static int get_current_power_limit(struct powercap_zone *power_zone, int cid, 456 u64 *data) 457 { 458 struct rapl_domain *rd; 459 u64 val; 460 int ret = 0; 461 int id; 462 463 cpus_read_lock(); 464 rd = power_zone_to_rapl_domain(power_zone); 465 id = contraint_to_pl(rd, cid); 466 467 ret = rapl_read_pl_data(rd, id, PL_LIMIT, true, &val); 468 if (!ret) 469 *data = val; 470 471 cpus_read_unlock(); 472 473 return ret; 474 } 475 476 static int set_time_window(struct powercap_zone *power_zone, int cid, 477 u64 window) 478 { 479 struct rapl_domain *rd; 480 int ret = 0; 481 int id; 482 483 cpus_read_lock(); 484 rd = power_zone_to_rapl_domain(power_zone); 485 id = contraint_to_pl(rd, cid); 486 487 ret = rapl_write_pl_data(rd, id, PL_TIME_WINDOW, window); 488 489 cpus_read_unlock(); 490 return ret; 491 } 492 493 static int get_time_window(struct powercap_zone *power_zone, int cid, 494 u64 *data) 495 { 496 struct rapl_domain *rd; 497 u64 val; 498 int ret = 0; 499 int id; 500 501 cpus_read_lock(); 502 rd = power_zone_to_rapl_domain(power_zone); 503 id = contraint_to_pl(rd, cid); 504 505 ret = rapl_read_pl_data(rd, id, PL_TIME_WINDOW, true, &val); 506 if (!ret) 507 *data = val; 508 509 cpus_read_unlock(); 510 511 return ret; 512 } 513 514 static const char *get_constraint_name(struct powercap_zone *power_zone, 515 int cid) 516 { 517 struct rapl_domain *rd; 518 int id; 519 520 rd = power_zone_to_rapl_domain(power_zone); 521 id = contraint_to_pl(rd, cid); 522 if (id >= 0) 523 return rd->rpl[id].name; 524 525 return NULL; 526 } 527 528 static int get_max_power(struct powercap_zone *power_zone, int cid, u64 *data) 529 { 530 struct rapl_domain *rd; 531 u64 val; 532 int ret = 0; 533 int id; 534 535 cpus_read_lock(); 536 rd = power_zone_to_rapl_domain(power_zone); 537 id = contraint_to_pl(rd, cid); 538 539 ret = rapl_read_pl_data(rd, id, PL_MAX_POWER, true, &val); 540 if (!ret) 541 *data = val; 542 543 /* As a generalization rule, PL4 would be around two times PL2. */ 544 if (id == POWER_LIMIT4) 545 *data = *data * 2; 546 547 cpus_read_unlock(); 548 549 return ret; 550 } 551 552 static const struct powercap_zone_constraint_ops constraint_ops = { 553 .set_power_limit_uw = set_power_limit, 554 .get_power_limit_uw = get_current_power_limit, 555 .set_time_window_us = set_time_window, 556 .get_time_window_us = get_time_window, 557 .get_max_power_uw = get_max_power, 558 .get_name = get_constraint_name, 559 }; 560 561 /* Return the id used for read_raw/write_raw callback */ 562 static int get_rid(struct rapl_package *rp) 563 { 564 return rp->lead_cpu >= 0 ? rp->lead_cpu : rp->id; 565 } 566 567 /* called after domain detection and package level data are set */ 568 static void rapl_init_domains(struct rapl_package *rp) 569 { 570 enum rapl_domain_type i; 571 enum rapl_domain_reg_id j; 572 struct rapl_domain *rd = rp->domains; 573 574 for (i = 0; i < RAPL_DOMAIN_MAX; i++) { 575 unsigned int mask = rp->domain_map & (1 << i); 576 int t; 577 578 if (!mask) 579 continue; 580 581 rd->rp = rp; 582 583 if (i == RAPL_DOMAIN_PLATFORM && rp->id > 0) { 584 snprintf(rd->name, RAPL_DOMAIN_NAME_LENGTH, "psys-%d", 585 rp->lead_cpu >= 0 ? topology_physical_package_id(rp->lead_cpu) : 586 rp->id); 587 } else { 588 snprintf(rd->name, RAPL_DOMAIN_NAME_LENGTH, "%s", 589 rapl_domain_names[i]); 590 } 591 592 rd->id = i; 593 594 /* PL1 is supported by default */ 595 rp->priv->limits[i] |= BIT(POWER_LIMIT1); 596 597 for (t = POWER_LIMIT1; t < NR_POWER_LIMITS; t++) { 598 if (rp->priv->limits[i] & BIT(t)) 599 rd->rpl[t].name = pl_names[t]; 600 } 601 602 for (j = 0; j < RAPL_DOMAIN_REG_MAX; j++) 603 rd->regs[j] = rp->priv->regs[i][j]; 604 605 rd++; 606 } 607 } 608 609 static u64 rapl_unit_xlate(struct rapl_domain *rd, enum unit_type type, 610 u64 value, int to_raw) 611 { 612 u64 units = 1; 613 struct rapl_defaults *defaults = get_defaults(rd->rp); 614 u64 scale = 1; 615 616 switch (type) { 617 case POWER_UNIT: 618 units = rd->power_unit; 619 break; 620 case ENERGY_UNIT: 621 scale = ENERGY_UNIT_SCALE; 622 units = rd->energy_unit; 623 break; 624 case TIME_UNIT: 625 return defaults->compute_time_window(rd, value, to_raw); 626 case ARBITRARY_UNIT: 627 default: 628 return value; 629 } 630 631 if (to_raw) 632 return div64_u64(value, units) * scale; 633 634 value *= units; 635 636 return div64_u64(value, scale); 637 } 638 639 /* RAPL primitives for MSR and MMIO I/F */ 640 static struct rapl_primitive_info rpi_msr[NR_RAPL_PRIMITIVES] = { 641 /* name, mask, shift, msr index, unit divisor */ 642 [POWER_LIMIT1] = PRIMITIVE_INFO_INIT(POWER_LIMIT1, POWER_LIMIT1_MASK, 0, 643 RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0), 644 [POWER_LIMIT2] = PRIMITIVE_INFO_INIT(POWER_LIMIT2, POWER_LIMIT2_MASK, 32, 645 RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0), 646 [POWER_LIMIT4] = PRIMITIVE_INFO_INIT(POWER_LIMIT4, POWER_LIMIT4_MASK, 0, 647 RAPL_DOMAIN_REG_PL4, POWER_UNIT, 0), 648 [ENERGY_COUNTER] = PRIMITIVE_INFO_INIT(ENERGY_COUNTER, ENERGY_STATUS_MASK, 0, 649 RAPL_DOMAIN_REG_STATUS, ENERGY_UNIT, 0), 650 [FW_LOCK] = PRIMITIVE_INFO_INIT(FW_LOCK, POWER_LOW_LOCK, 31, 651 RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), 652 [FW_HIGH_LOCK] = PRIMITIVE_INFO_INIT(FW_LOCK, POWER_HIGH_LOCK, 63, 653 RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), 654 [PL1_ENABLE] = PRIMITIVE_INFO_INIT(PL1_ENABLE, POWER_LIMIT1_ENABLE, 15, 655 RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), 656 [PL1_CLAMP] = PRIMITIVE_INFO_INIT(PL1_CLAMP, POWER_LIMIT1_CLAMP, 16, 657 RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), 658 [PL2_ENABLE] = PRIMITIVE_INFO_INIT(PL2_ENABLE, POWER_LIMIT2_ENABLE, 47, 659 RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), 660 [PL2_CLAMP] = PRIMITIVE_INFO_INIT(PL2_CLAMP, POWER_LIMIT2_CLAMP, 48, 661 RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), 662 [TIME_WINDOW1] = PRIMITIVE_INFO_INIT(TIME_WINDOW1, TIME_WINDOW1_MASK, 17, 663 RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0), 664 [TIME_WINDOW2] = PRIMITIVE_INFO_INIT(TIME_WINDOW2, TIME_WINDOW2_MASK, 49, 665 RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0), 666 [THERMAL_SPEC_POWER] = PRIMITIVE_INFO_INIT(THERMAL_SPEC_POWER, POWER_INFO_THERMAL_SPEC_MASK, 667 0, RAPL_DOMAIN_REG_INFO, POWER_UNIT, 0), 668 [MAX_POWER] = PRIMITIVE_INFO_INIT(MAX_POWER, POWER_INFO_MAX_MASK, 32, 669 RAPL_DOMAIN_REG_INFO, POWER_UNIT, 0), 670 [MIN_POWER] = PRIMITIVE_INFO_INIT(MIN_POWER, POWER_INFO_MIN_MASK, 16, 671 RAPL_DOMAIN_REG_INFO, POWER_UNIT, 0), 672 [MAX_TIME_WINDOW] = PRIMITIVE_INFO_INIT(MAX_TIME_WINDOW, POWER_INFO_MAX_TIME_WIN_MASK, 48, 673 RAPL_DOMAIN_REG_INFO, TIME_UNIT, 0), 674 [THROTTLED_TIME] = PRIMITIVE_INFO_INIT(THROTTLED_TIME, PERF_STATUS_THROTTLE_TIME_MASK, 0, 675 RAPL_DOMAIN_REG_PERF, TIME_UNIT, 0), 676 [PRIORITY_LEVEL] = PRIMITIVE_INFO_INIT(PRIORITY_LEVEL, PP_POLICY_MASK, 0, 677 RAPL_DOMAIN_REG_POLICY, ARBITRARY_UNIT, 0), 678 [PSYS_POWER_LIMIT1] = PRIMITIVE_INFO_INIT(PSYS_POWER_LIMIT1, PSYS_POWER_LIMIT1_MASK, 0, 679 RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0), 680 [PSYS_POWER_LIMIT2] = PRIMITIVE_INFO_INIT(PSYS_POWER_LIMIT2, PSYS_POWER_LIMIT2_MASK, 32, 681 RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0), 682 [PSYS_PL1_ENABLE] = PRIMITIVE_INFO_INIT(PSYS_PL1_ENABLE, PSYS_POWER_LIMIT1_ENABLE, 17, 683 RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), 684 [PSYS_PL2_ENABLE] = PRIMITIVE_INFO_INIT(PSYS_PL2_ENABLE, PSYS_POWER_LIMIT2_ENABLE, 49, 685 RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), 686 [PSYS_TIME_WINDOW1] = PRIMITIVE_INFO_INIT(PSYS_TIME_WINDOW1, PSYS_TIME_WINDOW1_MASK, 19, 687 RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0), 688 [PSYS_TIME_WINDOW2] = PRIMITIVE_INFO_INIT(PSYS_TIME_WINDOW2, PSYS_TIME_WINDOW2_MASK, 51, 689 RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0), 690 /* non-hardware */ 691 [AVERAGE_POWER] = PRIMITIVE_INFO_INIT(AVERAGE_POWER, 0, 0, 0, POWER_UNIT, 692 RAPL_PRIMITIVE_DERIVED), 693 }; 694 695 /* RAPL primitives for TPMI I/F */ 696 static struct rapl_primitive_info rpi_tpmi[NR_RAPL_PRIMITIVES] = { 697 /* name, mask, shift, msr index, unit divisor */ 698 [POWER_LIMIT1] = PRIMITIVE_INFO_INIT(POWER_LIMIT1, TPMI_POWER_LIMIT_MASK, 0, 699 RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0), 700 [POWER_LIMIT2] = PRIMITIVE_INFO_INIT(POWER_LIMIT2, TPMI_POWER_LIMIT_MASK, 0, 701 RAPL_DOMAIN_REG_PL2, POWER_UNIT, 0), 702 [POWER_LIMIT4] = PRIMITIVE_INFO_INIT(POWER_LIMIT4, TPMI_POWER_LIMIT_MASK, 0, 703 RAPL_DOMAIN_REG_PL4, POWER_UNIT, 0), 704 [ENERGY_COUNTER] = PRIMITIVE_INFO_INIT(ENERGY_COUNTER, ENERGY_STATUS_MASK, 0, 705 RAPL_DOMAIN_REG_STATUS, ENERGY_UNIT, 0), 706 [PL1_LOCK] = PRIMITIVE_INFO_INIT(PL1_LOCK, POWER_HIGH_LOCK, 63, 707 RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), 708 [PL2_LOCK] = PRIMITIVE_INFO_INIT(PL2_LOCK, POWER_HIGH_LOCK, 63, 709 RAPL_DOMAIN_REG_PL2, ARBITRARY_UNIT, 0), 710 [PL4_LOCK] = PRIMITIVE_INFO_INIT(PL4_LOCK, POWER_HIGH_LOCK, 63, 711 RAPL_DOMAIN_REG_PL4, ARBITRARY_UNIT, 0), 712 [PL1_ENABLE] = PRIMITIVE_INFO_INIT(PL1_ENABLE, TPMI_POWER_LIMIT_ENABLE, 62, 713 RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), 714 [PL2_ENABLE] = PRIMITIVE_INFO_INIT(PL2_ENABLE, TPMI_POWER_LIMIT_ENABLE, 62, 715 RAPL_DOMAIN_REG_PL2, ARBITRARY_UNIT, 0), 716 [PL4_ENABLE] = PRIMITIVE_INFO_INIT(PL4_ENABLE, TPMI_POWER_LIMIT_ENABLE, 62, 717 RAPL_DOMAIN_REG_PL4, ARBITRARY_UNIT, 0), 718 [TIME_WINDOW1] = PRIMITIVE_INFO_INIT(TIME_WINDOW1, TPMI_TIME_WINDOW_MASK, 18, 719 RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0), 720 [TIME_WINDOW2] = PRIMITIVE_INFO_INIT(TIME_WINDOW2, TPMI_TIME_WINDOW_MASK, 18, 721 RAPL_DOMAIN_REG_PL2, TIME_UNIT, 0), 722 [THERMAL_SPEC_POWER] = PRIMITIVE_INFO_INIT(THERMAL_SPEC_POWER, TPMI_INFO_SPEC_MASK, 0, 723 RAPL_DOMAIN_REG_INFO, POWER_UNIT, 0), 724 [MAX_POWER] = PRIMITIVE_INFO_INIT(MAX_POWER, TPMI_INFO_MAX_MASK, 36, 725 RAPL_DOMAIN_REG_INFO, POWER_UNIT, 0), 726 [MIN_POWER] = PRIMITIVE_INFO_INIT(MIN_POWER, TPMI_INFO_MIN_MASK, 18, 727 RAPL_DOMAIN_REG_INFO, POWER_UNIT, 0), 728 [MAX_TIME_WINDOW] = PRIMITIVE_INFO_INIT(MAX_TIME_WINDOW, TPMI_INFO_MAX_TIME_WIN_MASK, 54, 729 RAPL_DOMAIN_REG_INFO, TIME_UNIT, 0), 730 [THROTTLED_TIME] = PRIMITIVE_INFO_INIT(THROTTLED_TIME, PERF_STATUS_THROTTLE_TIME_MASK, 0, 731 RAPL_DOMAIN_REG_PERF, TIME_UNIT, 0), 732 /* non-hardware */ 733 [AVERAGE_POWER] = PRIMITIVE_INFO_INIT(AVERAGE_POWER, 0, 0, 0, 734 POWER_UNIT, RAPL_PRIMITIVE_DERIVED), 735 }; 736 737 static struct rapl_primitive_info *get_rpi(struct rapl_package *rp, int prim) 738 { 739 struct rapl_primitive_info *rpi = rp->priv->rpi; 740 741 if (prim < 0 || prim > NR_RAPL_PRIMITIVES || !rpi) 742 return NULL; 743 744 return &rpi[prim]; 745 } 746 747 static int rapl_config(struct rapl_package *rp) 748 { 749 switch (rp->priv->type) { 750 /* MMIO I/F shares the same register layout as MSR registers */ 751 case RAPL_IF_MMIO: 752 case RAPL_IF_MSR: 753 rp->priv->defaults = (void *)defaults_msr; 754 rp->priv->rpi = (void *)rpi_msr; 755 break; 756 case RAPL_IF_TPMI: 757 rp->priv->defaults = (void *)&defaults_tpmi; 758 rp->priv->rpi = (void *)rpi_tpmi; 759 break; 760 default: 761 return -EINVAL; 762 } 763 764 /* defaults_msr can be NULL on unsupported platforms */ 765 if (!rp->priv->defaults || !rp->priv->rpi) 766 return -ENODEV; 767 768 return 0; 769 } 770 771 static enum rapl_primitives 772 prim_fixups(struct rapl_domain *rd, enum rapl_primitives prim) 773 { 774 struct rapl_defaults *defaults = get_defaults(rd->rp); 775 776 if (!defaults->spr_psys_bits) 777 return prim; 778 779 if (rd->id != RAPL_DOMAIN_PLATFORM) 780 return prim; 781 782 switch (prim) { 783 case POWER_LIMIT1: 784 return PSYS_POWER_LIMIT1; 785 case POWER_LIMIT2: 786 return PSYS_POWER_LIMIT2; 787 case PL1_ENABLE: 788 return PSYS_PL1_ENABLE; 789 case PL2_ENABLE: 790 return PSYS_PL2_ENABLE; 791 case TIME_WINDOW1: 792 return PSYS_TIME_WINDOW1; 793 case TIME_WINDOW2: 794 return PSYS_TIME_WINDOW2; 795 default: 796 return prim; 797 } 798 } 799 800 /* Read primitive data based on its related struct rapl_primitive_info. 801 * if xlate flag is set, return translated data based on data units, i.e. 802 * time, energy, and power. 803 * RAPL MSRs are non-architectual and are laid out not consistently across 804 * domains. Here we use primitive info to allow writing consolidated access 805 * functions. 806 * For a given primitive, it is processed by MSR mask and shift. Unit conversion 807 * is pre-assigned based on RAPL unit MSRs read at init time. 808 * 63-------------------------- 31--------------------------- 0 809 * | xxxxx (mask) | 810 * | |<- shift ----------------| 811 * 63-------------------------- 31--------------------------- 0 812 */ 813 static int rapl_read_data_raw(struct rapl_domain *rd, 814 enum rapl_primitives prim, bool xlate, u64 *data) 815 { 816 u64 value; 817 enum rapl_primitives prim_fixed = prim_fixups(rd, prim); 818 struct rapl_primitive_info *rpi = get_rpi(rd->rp, prim_fixed); 819 struct reg_action ra; 820 821 if (!rpi || !rpi->name || rpi->flag & RAPL_PRIMITIVE_DUMMY) 822 return -EINVAL; 823 824 ra.reg = rd->regs[rpi->id]; 825 if (!ra.reg.val) 826 return -EINVAL; 827 828 /* non-hardware data are collected by the polling thread */ 829 if (rpi->flag & RAPL_PRIMITIVE_DERIVED) { 830 *data = rd->rdd.primitives[prim]; 831 return 0; 832 } 833 834 ra.mask = rpi->mask; 835 836 if (rd->rp->priv->read_raw(get_rid(rd->rp), &ra)) { 837 pr_debug("failed to read reg 0x%llx for %s:%s\n", ra.reg.val, rd->rp->name, rd->name); 838 return -EIO; 839 } 840 841 value = ra.value >> rpi->shift; 842 843 if (xlate) 844 *data = rapl_unit_xlate(rd, rpi->unit, value, 0); 845 else 846 *data = value; 847 848 return 0; 849 } 850 851 /* Similar use of primitive info in the read counterpart */ 852 static int rapl_write_data_raw(struct rapl_domain *rd, 853 enum rapl_primitives prim, 854 unsigned long long value) 855 { 856 enum rapl_primitives prim_fixed = prim_fixups(rd, prim); 857 struct rapl_primitive_info *rpi = get_rpi(rd->rp, prim_fixed); 858 u64 bits; 859 struct reg_action ra; 860 int ret; 861 862 if (!rpi || !rpi->name || rpi->flag & RAPL_PRIMITIVE_DUMMY) 863 return -EINVAL; 864 865 bits = rapl_unit_xlate(rd, rpi->unit, value, 1); 866 bits <<= rpi->shift; 867 bits &= rpi->mask; 868 869 memset(&ra, 0, sizeof(ra)); 870 871 ra.reg = rd->regs[rpi->id]; 872 ra.mask = rpi->mask; 873 ra.value = bits; 874 875 ret = rd->rp->priv->write_raw(get_rid(rd->rp), &ra); 876 877 return ret; 878 } 879 880 static int rapl_read_pl_data(struct rapl_domain *rd, int pl, 881 enum pl_prims pl_prim, bool xlate, u64 *data) 882 { 883 enum rapl_primitives prim = get_pl_prim(rd, pl, pl_prim); 884 885 if (!is_pl_valid(rd, pl)) 886 return -EINVAL; 887 888 return rapl_read_data_raw(rd, prim, xlate, data); 889 } 890 891 static int rapl_write_pl_data(struct rapl_domain *rd, int pl, 892 enum pl_prims pl_prim, 893 unsigned long long value) 894 { 895 enum rapl_primitives prim = get_pl_prim(rd, pl, pl_prim); 896 897 if (!is_pl_valid(rd, pl)) 898 return -EINVAL; 899 900 if (rd->rpl[pl].locked) { 901 pr_debug("%s:%s:%s locked by BIOS\n", rd->rp->name, rd->name, pl_names[pl]); 902 return -EACCES; 903 } 904 905 return rapl_write_data_raw(rd, prim, value); 906 } 907 /* 908 * Raw RAPL data stored in MSRs are in certain scales. We need to 909 * convert them into standard units based on the units reported in 910 * the RAPL unit MSRs. This is specific to CPUs as the method to 911 * calculate units differ on different CPUs. 912 * We convert the units to below format based on CPUs. 913 * i.e. 914 * energy unit: picoJoules : Represented in picoJoules by default 915 * power unit : microWatts : Represented in milliWatts by default 916 * time unit : microseconds: Represented in seconds by default 917 */ 918 static int rapl_check_unit_core(struct rapl_domain *rd) 919 { 920 struct reg_action ra; 921 u32 value; 922 923 ra.reg = rd->regs[RAPL_DOMAIN_REG_UNIT]; 924 ra.mask = ~0; 925 if (rd->rp->priv->read_raw(get_rid(rd->rp), &ra)) { 926 pr_err("Failed to read power unit REG 0x%llx on %s:%s, exit.\n", 927 ra.reg.val, rd->rp->name, rd->name); 928 return -ENODEV; 929 } 930 931 value = (ra.value & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET; 932 rd->energy_unit = ENERGY_UNIT_SCALE * 1000000 / (1 << value); 933 934 value = (ra.value & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET; 935 rd->power_unit = 1000000 / (1 << value); 936 937 value = (ra.value & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET; 938 rd->time_unit = 1000000 / (1 << value); 939 940 pr_debug("Core CPU %s:%s energy=%dpJ, time=%dus, power=%duW\n", 941 rd->rp->name, rd->name, rd->energy_unit, rd->time_unit, rd->power_unit); 942 943 return 0; 944 } 945 946 static int rapl_check_unit_atom(struct rapl_domain *rd) 947 { 948 struct reg_action ra; 949 u32 value; 950 951 ra.reg = rd->regs[RAPL_DOMAIN_REG_UNIT]; 952 ra.mask = ~0; 953 if (rd->rp->priv->read_raw(get_rid(rd->rp), &ra)) { 954 pr_err("Failed to read power unit REG 0x%llx on %s:%s, exit.\n", 955 ra.reg.val, rd->rp->name, rd->name); 956 return -ENODEV; 957 } 958 959 value = (ra.value & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET; 960 rd->energy_unit = ENERGY_UNIT_SCALE * 1 << value; 961 962 value = (ra.value & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET; 963 rd->power_unit = (1 << value) * 1000; 964 965 value = (ra.value & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET; 966 rd->time_unit = 1000000 / (1 << value); 967 968 pr_debug("Atom %s:%s energy=%dpJ, time=%dus, power=%duW\n", 969 rd->rp->name, rd->name, rd->energy_unit, rd->time_unit, rd->power_unit); 970 971 return 0; 972 } 973 974 static void power_limit_irq_save_cpu(void *info) 975 { 976 u32 l, h = 0; 977 struct rapl_package *rp = (struct rapl_package *)info; 978 979 /* save the state of PLN irq mask bit before disabling it */ 980 rdmsr_safe(MSR_IA32_PACKAGE_THERM_INTERRUPT, &l, &h); 981 if (!(rp->power_limit_irq & PACKAGE_PLN_INT_SAVED)) { 982 rp->power_limit_irq = l & PACKAGE_THERM_INT_PLN_ENABLE; 983 rp->power_limit_irq |= PACKAGE_PLN_INT_SAVED; 984 } 985 l &= ~PACKAGE_THERM_INT_PLN_ENABLE; 986 wrmsr_safe(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); 987 } 988 989 /* REVISIT: 990 * When package power limit is set artificially low by RAPL, LVT 991 * thermal interrupt for package power limit should be ignored 992 * since we are not really exceeding the real limit. The intention 993 * is to avoid excessive interrupts while we are trying to save power. 994 * A useful feature might be routing the package_power_limit interrupt 995 * to userspace via eventfd. once we have a usecase, this is simple 996 * to do by adding an atomic notifier. 997 */ 998 999 static void package_power_limit_irq_save(struct rapl_package *rp) 1000 { 1001 if (rp->lead_cpu < 0) 1002 return; 1003 1004 if (!boot_cpu_has(X86_FEATURE_PTS) || !boot_cpu_has(X86_FEATURE_PLN)) 1005 return; 1006 1007 smp_call_function_single(rp->lead_cpu, power_limit_irq_save_cpu, rp, 1); 1008 } 1009 1010 /* 1011 * Restore per package power limit interrupt enable state. Called from cpu 1012 * hotplug code on package removal. 1013 */ 1014 static void package_power_limit_irq_restore(struct rapl_package *rp) 1015 { 1016 u32 l, h; 1017 1018 if (rp->lead_cpu < 0) 1019 return; 1020 1021 if (!boot_cpu_has(X86_FEATURE_PTS) || !boot_cpu_has(X86_FEATURE_PLN)) 1022 return; 1023 1024 /* irq enable state not saved, nothing to restore */ 1025 if (!(rp->power_limit_irq & PACKAGE_PLN_INT_SAVED)) 1026 return; 1027 1028 rdmsr_safe(MSR_IA32_PACKAGE_THERM_INTERRUPT, &l, &h); 1029 1030 if (rp->power_limit_irq & PACKAGE_THERM_INT_PLN_ENABLE) 1031 l |= PACKAGE_THERM_INT_PLN_ENABLE; 1032 else 1033 l &= ~PACKAGE_THERM_INT_PLN_ENABLE; 1034 1035 wrmsr_safe(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); 1036 } 1037 1038 static void set_floor_freq_default(struct rapl_domain *rd, bool mode) 1039 { 1040 int i; 1041 1042 /* always enable clamp such that p-state can go below OS requested 1043 * range. power capping priority over guranteed frequency. 1044 */ 1045 rapl_write_pl_data(rd, POWER_LIMIT1, PL_CLAMP, mode); 1046 1047 for (i = POWER_LIMIT2; i < NR_POWER_LIMITS; i++) { 1048 rapl_write_pl_data(rd, i, PL_ENABLE, mode); 1049 rapl_write_pl_data(rd, i, PL_CLAMP, mode); 1050 } 1051 } 1052 1053 static void set_floor_freq_atom(struct rapl_domain *rd, bool enable) 1054 { 1055 static u32 power_ctrl_orig_val; 1056 struct rapl_defaults *defaults = get_defaults(rd->rp); 1057 u32 mdata; 1058 1059 if (!defaults->floor_freq_reg_addr) { 1060 pr_err("Invalid floor frequency config register\n"); 1061 return; 1062 } 1063 1064 if (!power_ctrl_orig_val) 1065 iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_CR_READ, 1066 defaults->floor_freq_reg_addr, 1067 &power_ctrl_orig_val); 1068 mdata = power_ctrl_orig_val; 1069 if (enable) { 1070 mdata &= ~(0x7f << 8); 1071 mdata |= 1 << 8; 1072 } 1073 iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_CR_WRITE, 1074 defaults->floor_freq_reg_addr, mdata); 1075 } 1076 1077 static u64 rapl_compute_time_window_core(struct rapl_domain *rd, u64 value, 1078 bool to_raw) 1079 { 1080 u64 f, y; /* fraction and exp. used for time unit */ 1081 1082 /* 1083 * Special processing based on 2^Y*(1+F/4), refer 1084 * to Intel Software Developer's manual Vol.3B: CH 14.9.3. 1085 */ 1086 if (!to_raw) { 1087 f = (value & 0x60) >> 5; 1088 y = value & 0x1f; 1089 value = (1 << y) * (4 + f) * rd->time_unit / 4; 1090 } else { 1091 if (value < rd->time_unit) 1092 return 0; 1093 1094 do_div(value, rd->time_unit); 1095 y = ilog2(value); 1096 1097 /* 1098 * The target hardware field is 7 bits wide, so return all ones 1099 * if the exponent is too large. 1100 */ 1101 if (y > 0x1f) 1102 return 0x7f; 1103 1104 f = div64_u64(4 * (value - (1ULL << y)), 1ULL << y); 1105 value = (y & 0x1f) | ((f & 0x3) << 5); 1106 } 1107 return value; 1108 } 1109 1110 static u64 rapl_compute_time_window_atom(struct rapl_domain *rd, u64 value, 1111 bool to_raw) 1112 { 1113 /* 1114 * Atom time unit encoding is straight forward val * time_unit, 1115 * where time_unit is default to 1 sec. Never 0. 1116 */ 1117 if (!to_raw) 1118 return (value) ? value * rd->time_unit : rd->time_unit; 1119 1120 value = div64_u64(value, rd->time_unit); 1121 1122 return value; 1123 } 1124 1125 /* TPMI Unit register has different layout */ 1126 #define TPMI_POWER_UNIT_OFFSET POWER_UNIT_OFFSET 1127 #define TPMI_POWER_UNIT_MASK POWER_UNIT_MASK 1128 #define TPMI_ENERGY_UNIT_OFFSET 0x06 1129 #define TPMI_ENERGY_UNIT_MASK 0x7C0 1130 #define TPMI_TIME_UNIT_OFFSET 0x0C 1131 #define TPMI_TIME_UNIT_MASK 0xF000 1132 1133 static int rapl_check_unit_tpmi(struct rapl_domain *rd) 1134 { 1135 struct reg_action ra; 1136 u32 value; 1137 1138 ra.reg = rd->regs[RAPL_DOMAIN_REG_UNIT]; 1139 ra.mask = ~0; 1140 if (rd->rp->priv->read_raw(get_rid(rd->rp), &ra)) { 1141 pr_err("Failed to read power unit REG 0x%llx on %s:%s, exit.\n", 1142 ra.reg.val, rd->rp->name, rd->name); 1143 return -ENODEV; 1144 } 1145 1146 value = (ra.value & TPMI_ENERGY_UNIT_MASK) >> TPMI_ENERGY_UNIT_OFFSET; 1147 rd->energy_unit = ENERGY_UNIT_SCALE * 1000000 / (1 << value); 1148 1149 value = (ra.value & TPMI_POWER_UNIT_MASK) >> TPMI_POWER_UNIT_OFFSET; 1150 rd->power_unit = 1000000 / (1 << value); 1151 1152 value = (ra.value & TPMI_TIME_UNIT_MASK) >> TPMI_TIME_UNIT_OFFSET; 1153 rd->time_unit = 1000000 / (1 << value); 1154 1155 pr_debug("Core CPU %s:%s energy=%dpJ, time=%dus, power=%duW\n", 1156 rd->rp->name, rd->name, rd->energy_unit, rd->time_unit, rd->power_unit); 1157 1158 return 0; 1159 } 1160 1161 static const struct rapl_defaults defaults_tpmi = { 1162 .check_unit = rapl_check_unit_tpmi, 1163 /* Reuse existing logic, ignore the PL_CLAMP failures and enable all Power Limits */ 1164 .set_floor_freq = set_floor_freq_default, 1165 .compute_time_window = rapl_compute_time_window_core, 1166 }; 1167 1168 static const struct rapl_defaults rapl_defaults_core = { 1169 .floor_freq_reg_addr = 0, 1170 .check_unit = rapl_check_unit_core, 1171 .set_floor_freq = set_floor_freq_default, 1172 .compute_time_window = rapl_compute_time_window_core, 1173 }; 1174 1175 static const struct rapl_defaults rapl_defaults_hsw_server = { 1176 .check_unit = rapl_check_unit_core, 1177 .set_floor_freq = set_floor_freq_default, 1178 .compute_time_window = rapl_compute_time_window_core, 1179 .dram_domain_energy_unit = 15300, 1180 }; 1181 1182 static const struct rapl_defaults rapl_defaults_spr_server = { 1183 .check_unit = rapl_check_unit_core, 1184 .set_floor_freq = set_floor_freq_default, 1185 .compute_time_window = rapl_compute_time_window_core, 1186 .psys_domain_energy_unit = 1000000000, 1187 .spr_psys_bits = true, 1188 }; 1189 1190 static const struct rapl_defaults rapl_defaults_byt = { 1191 .floor_freq_reg_addr = IOSF_CPU_POWER_BUDGET_CTL_BYT, 1192 .check_unit = rapl_check_unit_atom, 1193 .set_floor_freq = set_floor_freq_atom, 1194 .compute_time_window = rapl_compute_time_window_atom, 1195 }; 1196 1197 static const struct rapl_defaults rapl_defaults_tng = { 1198 .floor_freq_reg_addr = IOSF_CPU_POWER_BUDGET_CTL_TNG, 1199 .check_unit = rapl_check_unit_atom, 1200 .set_floor_freq = set_floor_freq_atom, 1201 .compute_time_window = rapl_compute_time_window_atom, 1202 }; 1203 1204 static const struct rapl_defaults rapl_defaults_ann = { 1205 .floor_freq_reg_addr = 0, 1206 .check_unit = rapl_check_unit_atom, 1207 .set_floor_freq = NULL, 1208 .compute_time_window = rapl_compute_time_window_atom, 1209 }; 1210 1211 static const struct rapl_defaults rapl_defaults_cht = { 1212 .floor_freq_reg_addr = 0, 1213 .check_unit = rapl_check_unit_atom, 1214 .set_floor_freq = NULL, 1215 .compute_time_window = rapl_compute_time_window_atom, 1216 }; 1217 1218 static const struct rapl_defaults rapl_defaults_amd = { 1219 .check_unit = rapl_check_unit_core, 1220 }; 1221 1222 static const struct x86_cpu_id rapl_ids[] __initconst = { 1223 X86_MATCH_INTEL_FAM6_MODEL(SANDYBRIDGE, &rapl_defaults_core), 1224 X86_MATCH_INTEL_FAM6_MODEL(SANDYBRIDGE_X, &rapl_defaults_core), 1225 1226 X86_MATCH_INTEL_FAM6_MODEL(IVYBRIDGE, &rapl_defaults_core), 1227 X86_MATCH_INTEL_FAM6_MODEL(IVYBRIDGE_X, &rapl_defaults_core), 1228 1229 X86_MATCH_INTEL_FAM6_MODEL(HASWELL, &rapl_defaults_core), 1230 X86_MATCH_INTEL_FAM6_MODEL(HASWELL_L, &rapl_defaults_core), 1231 X86_MATCH_INTEL_FAM6_MODEL(HASWELL_G, &rapl_defaults_core), 1232 X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, &rapl_defaults_hsw_server), 1233 1234 X86_MATCH_INTEL_FAM6_MODEL(BROADWELL, &rapl_defaults_core), 1235 X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_G, &rapl_defaults_core), 1236 X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_D, &rapl_defaults_core), 1237 X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, &rapl_defaults_hsw_server), 1238 1239 X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE, &rapl_defaults_core), 1240 X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L, &rapl_defaults_core), 1241 X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X, &rapl_defaults_hsw_server), 1242 X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L, &rapl_defaults_core), 1243 X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, &rapl_defaults_core), 1244 X86_MATCH_INTEL_FAM6_MODEL(CANNONLAKE_L, &rapl_defaults_core), 1245 X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L, &rapl_defaults_core), 1246 X86_MATCH_INTEL_FAM6_MODEL(ICELAKE, &rapl_defaults_core), 1247 X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_NNPI, &rapl_defaults_core), 1248 X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, &rapl_defaults_hsw_server), 1249 X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D, &rapl_defaults_hsw_server), 1250 X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE_L, &rapl_defaults_core), 1251 X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE, &rapl_defaults_core), 1252 X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L, &rapl_defaults_core), 1253 X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE, &rapl_defaults_core), 1254 X86_MATCH_INTEL_FAM6_MODEL(ROCKETLAKE, &rapl_defaults_core), 1255 X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE, &rapl_defaults_core), 1256 X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, &rapl_defaults_core), 1257 X86_MATCH_INTEL_FAM6_MODEL(ATOM_GRACEMONT, &rapl_defaults_core), 1258 X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE, &rapl_defaults_core), 1259 X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_P, &rapl_defaults_core), 1260 X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_S, &rapl_defaults_core), 1261 X86_MATCH_INTEL_FAM6_MODEL(METEORLAKE, &rapl_defaults_core), 1262 X86_MATCH_INTEL_FAM6_MODEL(METEORLAKE_L, &rapl_defaults_core), 1263 X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, &rapl_defaults_spr_server), 1264 X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X, &rapl_defaults_spr_server), 1265 X86_MATCH_INTEL_FAM6_MODEL(LUNARLAKE_M, &rapl_defaults_core), 1266 X86_MATCH_INTEL_FAM6_MODEL(ARROWLAKE, &rapl_defaults_core), 1267 X86_MATCH_INTEL_FAM6_MODEL(LAKEFIELD, &rapl_defaults_core), 1268 1269 X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT, &rapl_defaults_byt), 1270 X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT, &rapl_defaults_cht), 1271 X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID, &rapl_defaults_tng), 1272 X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT_MID, &rapl_defaults_ann), 1273 X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, &rapl_defaults_core), 1274 X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS, &rapl_defaults_core), 1275 X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D, &rapl_defaults_core), 1276 X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT, &rapl_defaults_core), 1277 X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D, &rapl_defaults_core), 1278 X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L, &rapl_defaults_core), 1279 1280 X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNL, &rapl_defaults_hsw_server), 1281 X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNM, &rapl_defaults_hsw_server), 1282 1283 X86_MATCH_VENDOR_FAM(AMD, 0x17, &rapl_defaults_amd), 1284 X86_MATCH_VENDOR_FAM(AMD, 0x19, &rapl_defaults_amd), 1285 X86_MATCH_VENDOR_FAM(HYGON, 0x18, &rapl_defaults_amd), 1286 {} 1287 }; 1288 MODULE_DEVICE_TABLE(x86cpu, rapl_ids); 1289 1290 /* Read once for all raw primitive data for domains */ 1291 static void rapl_update_domain_data(struct rapl_package *rp) 1292 { 1293 int dmn, prim; 1294 u64 val; 1295 1296 for (dmn = 0; dmn < rp->nr_domains; dmn++) { 1297 pr_debug("update %s domain %s data\n", rp->name, 1298 rp->domains[dmn].name); 1299 /* exclude non-raw primitives */ 1300 for (prim = 0; prim < NR_RAW_PRIMITIVES; prim++) { 1301 struct rapl_primitive_info *rpi = get_rpi(rp, prim); 1302 1303 if (!rapl_read_data_raw(&rp->domains[dmn], prim, 1304 rpi->unit, &val)) 1305 rp->domains[dmn].rdd.primitives[prim] = val; 1306 } 1307 } 1308 1309 } 1310 1311 static int rapl_package_register_powercap(struct rapl_package *rp) 1312 { 1313 struct rapl_domain *rd; 1314 struct powercap_zone *power_zone = NULL; 1315 int nr_pl, ret; 1316 1317 /* Update the domain data of the new package */ 1318 rapl_update_domain_data(rp); 1319 1320 /* first we register package domain as the parent zone */ 1321 for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) { 1322 if (rd->id == RAPL_DOMAIN_PACKAGE) { 1323 nr_pl = find_nr_power_limit(rd); 1324 pr_debug("register package domain %s\n", rp->name); 1325 power_zone = powercap_register_zone(&rd->power_zone, 1326 rp->priv->control_type, rp->name, 1327 NULL, &zone_ops[rd->id], nr_pl, 1328 &constraint_ops); 1329 if (IS_ERR(power_zone)) { 1330 pr_debug("failed to register power zone %s\n", 1331 rp->name); 1332 return PTR_ERR(power_zone); 1333 } 1334 /* track parent zone in per package/socket data */ 1335 rp->power_zone = power_zone; 1336 /* done, only one package domain per socket */ 1337 break; 1338 } 1339 } 1340 if (!power_zone) { 1341 pr_err("no package domain found, unknown topology!\n"); 1342 return -ENODEV; 1343 } 1344 /* now register domains as children of the socket/package */ 1345 for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) { 1346 struct powercap_zone *parent = rp->power_zone; 1347 1348 if (rd->id == RAPL_DOMAIN_PACKAGE) 1349 continue; 1350 if (rd->id == RAPL_DOMAIN_PLATFORM) 1351 parent = NULL; 1352 /* number of power limits per domain varies */ 1353 nr_pl = find_nr_power_limit(rd); 1354 power_zone = powercap_register_zone(&rd->power_zone, 1355 rp->priv->control_type, 1356 rd->name, parent, 1357 &zone_ops[rd->id], nr_pl, 1358 &constraint_ops); 1359 1360 if (IS_ERR(power_zone)) { 1361 pr_debug("failed to register power_zone, %s:%s\n", 1362 rp->name, rd->name); 1363 ret = PTR_ERR(power_zone); 1364 goto err_cleanup; 1365 } 1366 } 1367 return 0; 1368 1369 err_cleanup: 1370 /* 1371 * Clean up previously initialized domains within the package if we 1372 * failed after the first domain setup. 1373 */ 1374 while (--rd >= rp->domains) { 1375 pr_debug("unregister %s domain %s\n", rp->name, rd->name); 1376 powercap_unregister_zone(rp->priv->control_type, 1377 &rd->power_zone); 1378 } 1379 1380 return ret; 1381 } 1382 1383 static int rapl_check_domain(int domain, struct rapl_package *rp) 1384 { 1385 struct reg_action ra; 1386 1387 switch (domain) { 1388 case RAPL_DOMAIN_PACKAGE: 1389 case RAPL_DOMAIN_PP0: 1390 case RAPL_DOMAIN_PP1: 1391 case RAPL_DOMAIN_DRAM: 1392 case RAPL_DOMAIN_PLATFORM: 1393 ra.reg = rp->priv->regs[domain][RAPL_DOMAIN_REG_STATUS]; 1394 break; 1395 default: 1396 pr_err("invalid domain id %d\n", domain); 1397 return -EINVAL; 1398 } 1399 /* make sure domain counters are available and contains non-zero 1400 * values, otherwise skip it. 1401 */ 1402 1403 ra.mask = ENERGY_STATUS_MASK; 1404 if (rp->priv->read_raw(get_rid(rp), &ra) || !ra.value) 1405 return -ENODEV; 1406 1407 return 0; 1408 } 1409 1410 /* 1411 * Get per domain energy/power/time unit. 1412 * RAPL Interfaces without per domain unit register will use the package 1413 * scope unit register to set per domain units. 1414 */ 1415 static int rapl_get_domain_unit(struct rapl_domain *rd) 1416 { 1417 struct rapl_defaults *defaults = get_defaults(rd->rp); 1418 int ret; 1419 1420 if (!rd->regs[RAPL_DOMAIN_REG_UNIT].val) { 1421 if (!rd->rp->priv->reg_unit.val) { 1422 pr_err("No valid Unit register found\n"); 1423 return -ENODEV; 1424 } 1425 rd->regs[RAPL_DOMAIN_REG_UNIT] = rd->rp->priv->reg_unit; 1426 } 1427 1428 if (!defaults->check_unit) { 1429 pr_err("missing .check_unit() callback\n"); 1430 return -ENODEV; 1431 } 1432 1433 ret = defaults->check_unit(rd); 1434 if (ret) 1435 return ret; 1436 1437 if (rd->id == RAPL_DOMAIN_DRAM && defaults->dram_domain_energy_unit) 1438 rd->energy_unit = defaults->dram_domain_energy_unit; 1439 if (rd->id == RAPL_DOMAIN_PLATFORM && defaults->psys_domain_energy_unit) 1440 rd->energy_unit = defaults->psys_domain_energy_unit; 1441 return 0; 1442 } 1443 1444 /* 1445 * Check if power limits are available. Two cases when they are not available: 1446 * 1. Locked by BIOS, in this case we still provide read-only access so that 1447 * users can see what limit is set by the BIOS. 1448 * 2. Some CPUs make some domains monitoring only which means PLx MSRs may not 1449 * exist at all. In this case, we do not show the constraints in powercap. 1450 * 1451 * Called after domains are detected and initialized. 1452 */ 1453 static void rapl_detect_powerlimit(struct rapl_domain *rd) 1454 { 1455 u64 val64; 1456 int i; 1457 1458 for (i = POWER_LIMIT1; i < NR_POWER_LIMITS; i++) { 1459 if (!rapl_read_pl_data(rd, i, PL_LOCK, false, &val64)) { 1460 if (val64) { 1461 rd->rpl[i].locked = true; 1462 pr_info("%s:%s:%s locked by BIOS\n", 1463 rd->rp->name, rd->name, pl_names[i]); 1464 } 1465 } 1466 1467 if (rapl_read_pl_data(rd, i, PL_LIMIT, false, &val64)) 1468 rd->rpl[i].name = NULL; 1469 } 1470 } 1471 1472 /* Detect active and valid domains for the given CPU, caller must 1473 * ensure the CPU belongs to the targeted package and CPU hotlug is disabled. 1474 */ 1475 static int rapl_detect_domains(struct rapl_package *rp) 1476 { 1477 struct rapl_domain *rd; 1478 int i; 1479 1480 for (i = 0; i < RAPL_DOMAIN_MAX; i++) { 1481 /* use physical package id to read counters */ 1482 if (!rapl_check_domain(i, rp)) { 1483 rp->domain_map |= 1 << i; 1484 pr_info("Found RAPL domain %s\n", rapl_domain_names[i]); 1485 } 1486 } 1487 rp->nr_domains = bitmap_weight(&rp->domain_map, RAPL_DOMAIN_MAX); 1488 if (!rp->nr_domains) { 1489 pr_debug("no valid rapl domains found in %s\n", rp->name); 1490 return -ENODEV; 1491 } 1492 pr_debug("found %d domains on %s\n", rp->nr_domains, rp->name); 1493 1494 rp->domains = kcalloc(rp->nr_domains, sizeof(struct rapl_domain), 1495 GFP_KERNEL); 1496 if (!rp->domains) 1497 return -ENOMEM; 1498 1499 rapl_init_domains(rp); 1500 1501 for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) { 1502 rapl_get_domain_unit(rd); 1503 rapl_detect_powerlimit(rd); 1504 } 1505 1506 return 0; 1507 } 1508 1509 /* called from CPU hotplug notifier, hotplug lock held */ 1510 void rapl_remove_package_cpuslocked(struct rapl_package *rp) 1511 { 1512 struct rapl_domain *rd, *rd_package = NULL; 1513 1514 package_power_limit_irq_restore(rp); 1515 1516 for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) { 1517 int i; 1518 1519 for (i = POWER_LIMIT1; i < NR_POWER_LIMITS; i++) { 1520 rapl_write_pl_data(rd, i, PL_ENABLE, 0); 1521 rapl_write_pl_data(rd, i, PL_CLAMP, 0); 1522 } 1523 1524 if (rd->id == RAPL_DOMAIN_PACKAGE) { 1525 rd_package = rd; 1526 continue; 1527 } 1528 pr_debug("remove package, undo power limit on %s: %s\n", 1529 rp->name, rd->name); 1530 powercap_unregister_zone(rp->priv->control_type, 1531 &rd->power_zone); 1532 } 1533 /* do parent zone last */ 1534 powercap_unregister_zone(rp->priv->control_type, 1535 &rd_package->power_zone); 1536 list_del(&rp->plist); 1537 kfree(rp); 1538 } 1539 EXPORT_SYMBOL_GPL(rapl_remove_package_cpuslocked); 1540 1541 void rapl_remove_package(struct rapl_package *rp) 1542 { 1543 guard(cpus_read_lock)(); 1544 rapl_remove_package_cpuslocked(rp); 1545 } 1546 EXPORT_SYMBOL_GPL(rapl_remove_package); 1547 1548 /* caller to ensure CPU hotplug lock is held */ 1549 struct rapl_package *rapl_find_package_domain_cpuslocked(int id, struct rapl_if_priv *priv, 1550 bool id_is_cpu) 1551 { 1552 struct rapl_package *rp; 1553 int uid; 1554 1555 if (id_is_cpu) 1556 uid = topology_logical_die_id(id); 1557 else 1558 uid = id; 1559 1560 list_for_each_entry(rp, &rapl_packages, plist) { 1561 if (rp->id == uid 1562 && rp->priv->control_type == priv->control_type) 1563 return rp; 1564 } 1565 1566 return NULL; 1567 } 1568 EXPORT_SYMBOL_GPL(rapl_find_package_domain_cpuslocked); 1569 1570 struct rapl_package *rapl_find_package_domain(int id, struct rapl_if_priv *priv, bool id_is_cpu) 1571 { 1572 guard(cpus_read_lock)(); 1573 return rapl_find_package_domain_cpuslocked(id, priv, id_is_cpu); 1574 } 1575 EXPORT_SYMBOL_GPL(rapl_find_package_domain); 1576 1577 /* called from CPU hotplug notifier, hotplug lock held */ 1578 struct rapl_package *rapl_add_package_cpuslocked(int id, struct rapl_if_priv *priv, bool id_is_cpu) 1579 { 1580 struct rapl_package *rp; 1581 int ret; 1582 1583 rp = kzalloc(sizeof(struct rapl_package), GFP_KERNEL); 1584 if (!rp) 1585 return ERR_PTR(-ENOMEM); 1586 1587 if (id_is_cpu) { 1588 rp->id = topology_logical_die_id(id); 1589 rp->lead_cpu = id; 1590 if (topology_max_dies_per_package() > 1) 1591 snprintf(rp->name, PACKAGE_DOMAIN_NAME_LENGTH, "package-%d-die-%d", 1592 topology_physical_package_id(id), topology_die_id(id)); 1593 else 1594 snprintf(rp->name, PACKAGE_DOMAIN_NAME_LENGTH, "package-%d", 1595 topology_physical_package_id(id)); 1596 } else { 1597 rp->id = id; 1598 rp->lead_cpu = -1; 1599 snprintf(rp->name, PACKAGE_DOMAIN_NAME_LENGTH, "package-%d", id); 1600 } 1601 1602 rp->priv = priv; 1603 ret = rapl_config(rp); 1604 if (ret) 1605 goto err_free_package; 1606 1607 /* check if the package contains valid domains */ 1608 if (rapl_detect_domains(rp)) { 1609 ret = -ENODEV; 1610 goto err_free_package; 1611 } 1612 ret = rapl_package_register_powercap(rp); 1613 if (!ret) { 1614 INIT_LIST_HEAD(&rp->plist); 1615 list_add(&rp->plist, &rapl_packages); 1616 return rp; 1617 } 1618 1619 err_free_package: 1620 kfree(rp->domains); 1621 kfree(rp); 1622 return ERR_PTR(ret); 1623 } 1624 EXPORT_SYMBOL_GPL(rapl_add_package_cpuslocked); 1625 1626 struct rapl_package *rapl_add_package(int id, struct rapl_if_priv *priv, bool id_is_cpu) 1627 { 1628 guard(cpus_read_lock)(); 1629 return rapl_add_package_cpuslocked(id, priv, id_is_cpu); 1630 } 1631 EXPORT_SYMBOL_GPL(rapl_add_package); 1632 1633 static void power_limit_state_save(void) 1634 { 1635 struct rapl_package *rp; 1636 struct rapl_domain *rd; 1637 int ret, i; 1638 1639 cpus_read_lock(); 1640 list_for_each_entry(rp, &rapl_packages, plist) { 1641 if (!rp->power_zone) 1642 continue; 1643 rd = power_zone_to_rapl_domain(rp->power_zone); 1644 for (i = POWER_LIMIT1; i < NR_POWER_LIMITS; i++) { 1645 ret = rapl_read_pl_data(rd, i, PL_LIMIT, true, 1646 &rd->rpl[i].last_power_limit); 1647 if (ret) 1648 rd->rpl[i].last_power_limit = 0; 1649 } 1650 } 1651 cpus_read_unlock(); 1652 } 1653 1654 static void power_limit_state_restore(void) 1655 { 1656 struct rapl_package *rp; 1657 struct rapl_domain *rd; 1658 int i; 1659 1660 cpus_read_lock(); 1661 list_for_each_entry(rp, &rapl_packages, plist) { 1662 if (!rp->power_zone) 1663 continue; 1664 rd = power_zone_to_rapl_domain(rp->power_zone); 1665 for (i = POWER_LIMIT1; i < NR_POWER_LIMITS; i++) 1666 if (rd->rpl[i].last_power_limit) 1667 rapl_write_pl_data(rd, i, PL_LIMIT, 1668 rd->rpl[i].last_power_limit); 1669 } 1670 cpus_read_unlock(); 1671 } 1672 1673 static int rapl_pm_callback(struct notifier_block *nb, 1674 unsigned long mode, void *_unused) 1675 { 1676 switch (mode) { 1677 case PM_SUSPEND_PREPARE: 1678 power_limit_state_save(); 1679 break; 1680 case PM_POST_SUSPEND: 1681 power_limit_state_restore(); 1682 break; 1683 } 1684 return NOTIFY_OK; 1685 } 1686 1687 static struct notifier_block rapl_pm_notifier = { 1688 .notifier_call = rapl_pm_callback, 1689 }; 1690 1691 static struct platform_device *rapl_msr_platdev; 1692 1693 static int __init rapl_init(void) 1694 { 1695 const struct x86_cpu_id *id; 1696 int ret; 1697 1698 id = x86_match_cpu(rapl_ids); 1699 if (id) { 1700 defaults_msr = (struct rapl_defaults *)id->driver_data; 1701 1702 rapl_msr_platdev = platform_device_alloc("intel_rapl_msr", 0); 1703 if (!rapl_msr_platdev) 1704 return -ENOMEM; 1705 1706 ret = platform_device_add(rapl_msr_platdev); 1707 if (ret) { 1708 platform_device_put(rapl_msr_platdev); 1709 return ret; 1710 } 1711 } 1712 1713 ret = register_pm_notifier(&rapl_pm_notifier); 1714 if (ret && rapl_msr_platdev) { 1715 platform_device_del(rapl_msr_platdev); 1716 platform_device_put(rapl_msr_platdev); 1717 } 1718 1719 return ret; 1720 } 1721 1722 static void __exit rapl_exit(void) 1723 { 1724 platform_device_unregister(rapl_msr_platdev); 1725 unregister_pm_notifier(&rapl_pm_notifier); 1726 } 1727 1728 fs_initcall(rapl_init); 1729 module_exit(rapl_exit); 1730 1731 MODULE_DESCRIPTION("Intel Runtime Average Power Limit (RAPL) common code"); 1732 MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@intel.com>"); 1733 MODULE_LICENSE("GPL v2"); 1734