xref: /linux/drivers/power/supply/max1720x_battery.c (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Fuel gauge driver for Maxim 17201/17205
4  *
5  * based on max1721x_battery.c
6  *
7  * Copyright (C) 2024 Liebherr-Electronics and Drives GmbH
8  */
9 
10 #include <linux/bitfield.h>
11 #include <linux/i2c.h>
12 #include <linux/module.h>
13 #include <linux/nvmem-provider.h>
14 #include <linux/power_supply.h>
15 #include <linux/regmap.h>
16 
17 #include <linux/unaligned.h>
18 
19 /* Nonvolatile registers */
20 #define MAX1720X_NXTABLE0		0x80
21 #define MAX1720X_NRSENSE		0xCF	/* RSense in 10^-5 Ohm */
22 #define MAX1720X_NDEVICE_NAME4		0xDF
23 
24 /* ModelGauge m5 */
25 #define MAX172XX_STATUS			0x00	/* Status */
26 #define MAX172XX_STATUS_BAT_ABSENT	BIT(3)	/* Battery absent */
27 #define MAX172XX_REPCAP			0x05	/* Average capacity */
28 #define MAX172XX_REPSOC			0x06	/* Percentage of charge */
29 #define MAX172XX_TEMP			0x08	/* Temperature */
30 #define MAX172XX_CURRENT		0x0A	/* Actual current */
31 #define MAX172XX_AVG_CURRENT		0x0B	/* Average current */
32 #define MAX172XX_TTE			0x11	/* Time to empty */
33 #define MAX172XX_AVG_TA			0x16	/* Average temperature */
34 #define MAX172XX_CYCLES			0x17
35 #define MAX172XX_DESIGN_CAP		0x18	/* Design capacity */
36 #define MAX172XX_AVG_VCELL		0x19
37 #define MAX172XX_TTF			0x20	/* Time to full */
38 #define MAX172XX_DEV_NAME		0x21	/* Device name */
39 #define MAX172XX_DEV_NAME_TYPE_MASK	GENMASK(3, 0)
40 #define MAX172XX_DEV_NAME_TYPE_MAX17201	BIT(0)
41 #define MAX172XX_DEV_NAME_TYPE_MAX17205	(BIT(0) | BIT(2))
42 #define MAX172XX_QR_TABLE10		0x22
43 #define MAX172XX_BATT			0xDA	/* Battery voltage */
44 #define MAX172XX_ATAVCAP		0xDF
45 
46 static const char *const max1720x_manufacturer = "Maxim Integrated";
47 static const char *const max17201_model = "MAX17201";
48 static const char *const max17205_model = "MAX17205";
49 
50 struct max1720x_device_info {
51 	struct regmap *regmap;
52 	struct regmap *regmap_nv;
53 	struct i2c_client *ancillary;
54 	int rsense;
55 };
56 
57 /*
58  * Model Gauge M5 Algorithm output register
59  * Volatile data (must not be cached)
60  */
61 static const struct regmap_range max1720x_volatile_allow[] = {
62 	regmap_reg_range(MAX172XX_STATUS, MAX172XX_CYCLES),
63 	regmap_reg_range(MAX172XX_AVG_VCELL, MAX172XX_TTF),
64 	regmap_reg_range(MAX172XX_QR_TABLE10, MAX172XX_ATAVCAP),
65 };
66 
67 static const struct regmap_range max1720x_readable_allow[] = {
68 	regmap_reg_range(MAX172XX_STATUS, MAX172XX_ATAVCAP),
69 };
70 
71 static const struct regmap_range max1720x_readable_deny[] = {
72 	/* unused registers */
73 	regmap_reg_range(0x24, 0x26),
74 	regmap_reg_range(0x30, 0x31),
75 	regmap_reg_range(0x33, 0x34),
76 	regmap_reg_range(0x37, 0x37),
77 	regmap_reg_range(0x3B, 0x3C),
78 	regmap_reg_range(0x40, 0x41),
79 	regmap_reg_range(0x43, 0x44),
80 	regmap_reg_range(0x47, 0x49),
81 	regmap_reg_range(0x4B, 0x4C),
82 	regmap_reg_range(0x4E, 0xAF),
83 	regmap_reg_range(0xB1, 0xB3),
84 	regmap_reg_range(0xB5, 0xB7),
85 	regmap_reg_range(0xBF, 0xD0),
86 	regmap_reg_range(0xDB, 0xDB),
87 	regmap_reg_range(0xE0, 0xFF),
88 };
89 
90 static const struct regmap_access_table max1720x_readable_regs = {
91 	.yes_ranges	= max1720x_readable_allow,
92 	.n_yes_ranges	= ARRAY_SIZE(max1720x_readable_allow),
93 	.no_ranges	= max1720x_readable_deny,
94 	.n_no_ranges	= ARRAY_SIZE(max1720x_readable_deny),
95 };
96 
97 static const struct regmap_access_table max1720x_volatile_regs = {
98 	.yes_ranges	= max1720x_volatile_allow,
99 	.n_yes_ranges	= ARRAY_SIZE(max1720x_volatile_allow),
100 	.no_ranges	= max1720x_readable_deny,
101 	.n_no_ranges	= ARRAY_SIZE(max1720x_readable_deny),
102 };
103 
104 static const struct regmap_config max1720x_regmap_cfg = {
105 	.reg_bits = 8,
106 	.val_bits = 16,
107 	.max_register = MAX172XX_ATAVCAP,
108 	.val_format_endian = REGMAP_ENDIAN_LITTLE,
109 	.rd_table = &max1720x_readable_regs,
110 	.volatile_table = &max1720x_volatile_regs,
111 	.cache_type = REGCACHE_RBTREE,
112 };
113 
114 static const struct regmap_range max1720x_nvmem_allow[] = {
115 	regmap_reg_range(MAX1720X_NXTABLE0, MAX1720X_NDEVICE_NAME4),
116 };
117 
118 static const struct regmap_range max1720x_nvmem_deny[] = {
119 	regmap_reg_range(0x00, 0x7F),
120 	regmap_reg_range(0xE0, 0xFF),
121 };
122 
123 static const struct regmap_access_table max1720x_nvmem_regs = {
124 	.yes_ranges	= max1720x_nvmem_allow,
125 	.n_yes_ranges	= ARRAY_SIZE(max1720x_nvmem_allow),
126 	.no_ranges	= max1720x_nvmem_deny,
127 	.n_no_ranges	= ARRAY_SIZE(max1720x_nvmem_deny),
128 };
129 
130 static const struct regmap_config max1720x_nvmem_regmap_cfg = {
131 	.reg_bits = 8,
132 	.val_bits = 16,
133 	.max_register = MAX1720X_NDEVICE_NAME4,
134 	.val_format_endian = REGMAP_ENDIAN_LITTLE,
135 	.rd_table = &max1720x_nvmem_regs,
136 };
137 
138 static const struct nvmem_cell_info max1720x_nvmem_cells[] = {
139 	{ .name = "nXTable0",  .offset = 0,  .bytes = 2, },
140 	{ .name = "nXTable1",  .offset = 2,  .bytes = 2, },
141 	{ .name = "nXTable2",  .offset = 4,  .bytes = 2, },
142 	{ .name = "nXTable3",  .offset = 6,  .bytes = 2, },
143 	{ .name = "nXTable4",  .offset = 8,  .bytes = 2, },
144 	{ .name = "nXTable5",  .offset = 10, .bytes = 2, },
145 	{ .name = "nXTable6",  .offset = 12, .bytes = 2, },
146 	{ .name = "nXTable7",  .offset = 14, .bytes = 2, },
147 	{ .name = "nXTable8",  .offset = 16, .bytes = 2, },
148 	{ .name = "nXTable9",  .offset = 18, .bytes = 2, },
149 	{ .name = "nXTable10", .offset = 20, .bytes = 2, },
150 	{ .name = "nXTable11", .offset = 22, .bytes = 2, },
151 	{ .name = "nUser18C",  .offset = 24, .bytes = 2, },
152 	{ .name = "nUser18D",  .offset = 26, .bytes = 2, },
153 	{ .name = "nODSCTh",   .offset = 28, .bytes = 2, },
154 	{ .name = "nODSCCfg",  .offset = 30, .bytes = 2, },
155 
156 	{ .name = "nOCVTable0",  .offset = 32, .bytes = 2, },
157 	{ .name = "nOCVTable1",  .offset = 34, .bytes = 2, },
158 	{ .name = "nOCVTable2",  .offset = 36, .bytes = 2, },
159 	{ .name = "nOCVTable3",  .offset = 38, .bytes = 2, },
160 	{ .name = "nOCVTable4",  .offset = 40, .bytes = 2, },
161 	{ .name = "nOCVTable5",  .offset = 42, .bytes = 2, },
162 	{ .name = "nOCVTable6",  .offset = 44, .bytes = 2, },
163 	{ .name = "nOCVTable7",  .offset = 46, .bytes = 2, },
164 	{ .name = "nOCVTable8",  .offset = 48, .bytes = 2, },
165 	{ .name = "nOCVTable9",  .offset = 50, .bytes = 2, },
166 	{ .name = "nOCVTable10", .offset = 52, .bytes = 2, },
167 	{ .name = "nOCVTable11", .offset = 54, .bytes = 2, },
168 	{ .name = "nIChgTerm",   .offset = 56, .bytes = 2, },
169 	{ .name = "nFilterCfg",  .offset = 58, .bytes = 2, },
170 	{ .name = "nVEmpty",     .offset = 60, .bytes = 2, },
171 	{ .name = "nLearnCfg",   .offset = 62, .bytes = 2, },
172 
173 	{ .name = "nQRTable00",  .offset = 64, .bytes = 2, },
174 	{ .name = "nQRTable10",  .offset = 66, .bytes = 2, },
175 	{ .name = "nQRTable20",  .offset = 68, .bytes = 2, },
176 	{ .name = "nQRTable30",  .offset = 70, .bytes = 2, },
177 	{ .name = "nCycles",     .offset = 72, .bytes = 2, },
178 	{ .name = "nFullCapNom", .offset = 74, .bytes = 2, },
179 	{ .name = "nRComp0",     .offset = 76, .bytes = 2, },
180 	{ .name = "nTempCo",     .offset = 78, .bytes = 2, },
181 	{ .name = "nIAvgEmpty",  .offset = 80, .bytes = 2, },
182 	{ .name = "nFullCapRep", .offset = 82, .bytes = 2, },
183 	{ .name = "nVoltTemp",   .offset = 84, .bytes = 2, },
184 	{ .name = "nMaxMinCurr", .offset = 86, .bytes = 2, },
185 	{ .name = "nMaxMinVolt", .offset = 88, .bytes = 2, },
186 	{ .name = "nMaxMinTemp", .offset = 90, .bytes = 2, },
187 	{ .name = "nSOC",        .offset = 92, .bytes = 2, },
188 	{ .name = "nTimerH",     .offset = 94, .bytes = 2, },
189 
190 	{ .name = "nConfig",    .offset = 96,  .bytes = 2, },
191 	{ .name = "nRippleCfg", .offset = 98,  .bytes = 2, },
192 	{ .name = "nMiscCfg",   .offset = 100, .bytes = 2, },
193 	{ .name = "nDesignCap", .offset = 102, .bytes = 2, },
194 	{ .name = "nHibCfg",    .offset = 104, .bytes = 2, },
195 	{ .name = "nPackCfg",   .offset = 106, .bytes = 2, },
196 	{ .name = "nRelaxCfg",  .offset = 108, .bytes = 2, },
197 	{ .name = "nConvgCfg",  .offset = 110, .bytes = 2, },
198 	{ .name = "nNVCfg0",    .offset = 112, .bytes = 2, },
199 	{ .name = "nNVCfg1",    .offset = 114, .bytes = 2, },
200 	{ .name = "nNVCfg2",    .offset = 116, .bytes = 2, },
201 	{ .name = "nSBSCfg",    .offset = 118, .bytes = 2, },
202 	{ .name = "nROMID0",    .offset = 120, .bytes = 2, },
203 	{ .name = "nROMID1",    .offset = 122, .bytes = 2, },
204 	{ .name = "nROMID2",    .offset = 124, .bytes = 2, },
205 	{ .name = "nROMID3",    .offset = 126, .bytes = 2, },
206 
207 	{ .name = "nVAlrtTh",      .offset = 128, .bytes = 2, },
208 	{ .name = "nTAlrtTh",      .offset = 130, .bytes = 2, },
209 	{ .name = "nSAlrtTh",      .offset = 132, .bytes = 2, },
210 	{ .name = "nIAlrtTh",      .offset = 134, .bytes = 2, },
211 	{ .name = "nUser1C4",      .offset = 136, .bytes = 2, },
212 	{ .name = "nUser1C5",      .offset = 138, .bytes = 2, },
213 	{ .name = "nFullSOCThr",   .offset = 140, .bytes = 2, },
214 	{ .name = "nTTFCfg",       .offset = 142, .bytes = 2, },
215 	{ .name = "nCGain",        .offset = 144, .bytes = 2, },
216 	{ .name = "nTCurve",       .offset = 146, .bytes = 2, },
217 	{ .name = "nTGain",        .offset = 148, .bytes = 2, },
218 	{ .name = "nTOff",         .offset = 150, .bytes = 2, },
219 	{ .name = "nManfctrName0", .offset = 152, .bytes = 2, },
220 	{ .name = "nManfctrName1", .offset = 154, .bytes = 2, },
221 	{ .name = "nManfctrName2", .offset = 156, .bytes = 2, },
222 	{ .name = "nRSense",       .offset = 158, .bytes = 2, },
223 
224 	{ .name = "nUser1D0",       .offset = 160, .bytes = 2, },
225 	{ .name = "nUser1D1",       .offset = 162, .bytes = 2, },
226 	{ .name = "nAgeFcCfg",      .offset = 164, .bytes = 2, },
227 	{ .name = "nDesignVoltage", .offset = 166, .bytes = 2, },
228 	{ .name = "nUser1D4",       .offset = 168, .bytes = 2, },
229 	{ .name = "nRFastVShdn",    .offset = 170, .bytes = 2, },
230 	{ .name = "nManfctrDate",   .offset = 172, .bytes = 2, },
231 	{ .name = "nFirstUsed",     .offset = 174, .bytes = 2, },
232 	{ .name = "nSerialNumber0", .offset = 176, .bytes = 2, },
233 	{ .name = "nSerialNumber1", .offset = 178, .bytes = 2, },
234 	{ .name = "nSerialNumber2", .offset = 180, .bytes = 2, },
235 	{ .name = "nDeviceName0",   .offset = 182, .bytes = 2, },
236 	{ .name = "nDeviceName1",   .offset = 184, .bytes = 2, },
237 	{ .name = "nDeviceName2",   .offset = 186, .bytes = 2, },
238 	{ .name = "nDeviceName3",   .offset = 188, .bytes = 2, },
239 	{ .name = "nDeviceName4",   .offset = 190, .bytes = 2, },
240 };
241 
242 static const enum power_supply_property max1720x_battery_props[] = {
243 	POWER_SUPPLY_PROP_PRESENT,
244 	POWER_SUPPLY_PROP_CAPACITY,
245 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
246 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
247 	POWER_SUPPLY_PROP_CHARGE_AVG,
248 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
249 	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
250 	POWER_SUPPLY_PROP_TEMP,
251 	POWER_SUPPLY_PROP_CURRENT_NOW,
252 	POWER_SUPPLY_PROP_CURRENT_AVG,
253 	POWER_SUPPLY_PROP_MODEL_NAME,
254 	POWER_SUPPLY_PROP_MANUFACTURER,
255 };
256 
257 /* Convert regs value to power_supply units */
258 
259 static int max172xx_time_to_ps(unsigned int reg)
260 {
261 	return reg * 5625 / 1000;	/* in sec. */
262 }
263 
264 static int max172xx_percent_to_ps(unsigned int reg)
265 {
266 	return reg / 256;	/* in percent from 0 to 100 */
267 }
268 
269 static int max172xx_voltage_to_ps(unsigned int reg)
270 {
271 	return reg * 1250;	/* in uV */
272 }
273 
274 static int max172xx_capacity_to_ps(unsigned int reg)
275 {
276 	return reg * 500;	/* in uAh */
277 }
278 
279 /*
280  * Current and temperature is signed values, so unsigned regs
281  * value must be converted to signed type
282  */
283 
284 static int max172xx_temperature_to_ps(unsigned int reg)
285 {
286 	int val = (int16_t)reg;
287 
288 	return val * 10 / 256; /* in tenths of deg. C */
289 }
290 
291 /*
292  * Calculating current registers resolution:
293  *
294  * RSense stored in 10^-5 Ohm, so mesaurment voltage must be
295  * in 10^-11 Volts for get current in uA.
296  * 16 bit current reg fullscale +/-51.2mV is 102400 uV.
297  * So: 102400 / 65535 * 10^5 = 156252
298  */
299 static int max172xx_current_to_voltage(unsigned int reg)
300 {
301 	int val = (int16_t)reg;
302 
303 	return val * 156252;
304 }
305 
306 static int max1720x_battery_get_property(struct power_supply *psy,
307 					 enum power_supply_property psp,
308 					 union power_supply_propval *val)
309 {
310 	struct max1720x_device_info *info = power_supply_get_drvdata(psy);
311 	unsigned int reg_val;
312 	int ret = 0;
313 
314 	switch (psp) {
315 	case POWER_SUPPLY_PROP_PRESENT:
316 		/*
317 		 * POWER_SUPPLY_PROP_PRESENT will always readable via
318 		 * sysfs interface. Value return 0 if battery not
319 		 * present or unaccesable via I2c.
320 		 */
321 		ret = regmap_read(info->regmap, MAX172XX_STATUS, &reg_val);
322 		if (ret < 0) {
323 			val->intval = 0;
324 			return 0;
325 		}
326 
327 		val->intval = !FIELD_GET(MAX172XX_STATUS_BAT_ABSENT, reg_val);
328 		break;
329 	case POWER_SUPPLY_PROP_CAPACITY:
330 		ret = regmap_read(info->regmap, MAX172XX_REPSOC, &reg_val);
331 		val->intval = max172xx_percent_to_ps(reg_val);
332 		break;
333 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
334 		ret = regmap_read(info->regmap, MAX172XX_BATT, &reg_val);
335 		val->intval = max172xx_voltage_to_ps(reg_val);
336 		break;
337 	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
338 		ret = regmap_read(info->regmap, MAX172XX_DESIGN_CAP, &reg_val);
339 		val->intval = max172xx_capacity_to_ps(reg_val);
340 		break;
341 	case POWER_SUPPLY_PROP_CHARGE_AVG:
342 		ret = regmap_read(info->regmap, MAX172XX_REPCAP, &reg_val);
343 		val->intval = max172xx_capacity_to_ps(reg_val);
344 		break;
345 	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
346 		ret = regmap_read(info->regmap, MAX172XX_TTE, &reg_val);
347 		val->intval = max172xx_time_to_ps(reg_val);
348 		break;
349 	case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
350 		ret = regmap_read(info->regmap, MAX172XX_TTF, &reg_val);
351 		val->intval = max172xx_time_to_ps(reg_val);
352 		break;
353 	case POWER_SUPPLY_PROP_TEMP:
354 		ret = regmap_read(info->regmap, MAX172XX_TEMP, &reg_val);
355 		val->intval = max172xx_temperature_to_ps(reg_val);
356 		break;
357 	case POWER_SUPPLY_PROP_CURRENT_NOW:
358 		ret = regmap_read(info->regmap, MAX172XX_CURRENT, &reg_val);
359 		val->intval = max172xx_current_to_voltage(reg_val) / info->rsense;
360 		break;
361 	case POWER_SUPPLY_PROP_CURRENT_AVG:
362 		ret = regmap_read(info->regmap, MAX172XX_AVG_CURRENT, &reg_val);
363 		val->intval = max172xx_current_to_voltage(reg_val) / info->rsense;
364 		break;
365 	case POWER_SUPPLY_PROP_MODEL_NAME:
366 		ret = regmap_read(info->regmap, MAX172XX_DEV_NAME, &reg_val);
367 		reg_val = FIELD_GET(MAX172XX_DEV_NAME_TYPE_MASK, reg_val);
368 		if (reg_val == MAX172XX_DEV_NAME_TYPE_MAX17201)
369 			val->strval = max17201_model;
370 		else if (reg_val == MAX172XX_DEV_NAME_TYPE_MAX17205)
371 			val->strval = max17205_model;
372 		else
373 			return -ENODEV;
374 		break;
375 	case POWER_SUPPLY_PROP_MANUFACTURER:
376 		val->strval = max1720x_manufacturer;
377 		break;
378 	default:
379 		return -EINVAL;
380 	}
381 
382 	return ret;
383 }
384 
385 static
386 int max1720x_nvmem_reg_read(void *priv, unsigned int off, void *val, size_t len)
387 {
388 	struct max1720x_device_info *info = priv;
389 	unsigned int reg = MAX1720X_NXTABLE0 + (off / 2);
390 
391 	return regmap_bulk_read(info->regmap_nv, reg, val, len / 2);
392 }
393 
394 static void max1720x_unregister_ancillary(void *data)
395 {
396 	struct max1720x_device_info *info = data;
397 
398 	i2c_unregister_device(info->ancillary);
399 }
400 
401 static int max1720x_probe_nvmem(struct i2c_client *client,
402 				struct max1720x_device_info *info)
403 {
404 	struct device *dev = &client->dev;
405 	struct nvmem_config nvmem_config = {
406 		.dev = dev,
407 		.name = "max1720x_nvmem",
408 		.cells = max1720x_nvmem_cells,
409 		.ncells = ARRAY_SIZE(max1720x_nvmem_cells),
410 		.read_only = true,
411 		.root_only = true,
412 		.reg_read = max1720x_nvmem_reg_read,
413 		.size = ARRAY_SIZE(max1720x_nvmem_cells) * 2,
414 		.word_size = 2,
415 		.stride = 2,
416 		.priv = info,
417 	};
418 	struct nvmem_device *nvmem;
419 	unsigned int val;
420 	int ret;
421 
422 	info->ancillary = i2c_new_ancillary_device(client, "nvmem", 0xb);
423 	if (IS_ERR(info->ancillary)) {
424 		dev_err(dev, "Failed to initialize ancillary i2c device\n");
425 		return PTR_ERR(info->ancillary);
426 	}
427 
428 	ret = devm_add_action_or_reset(dev, max1720x_unregister_ancillary, info);
429 	if (ret) {
430 		dev_err(dev, "Failed to add unregister callback\n");
431 		return ret;
432 	}
433 
434 	info->regmap_nv = devm_regmap_init_i2c(info->ancillary,
435 					       &max1720x_nvmem_regmap_cfg);
436 	if (IS_ERR(info->regmap_nv)) {
437 		dev_err(dev, "regmap initialization of nvmem failed\n");
438 		return PTR_ERR(info->regmap_nv);
439 	}
440 
441 	ret = regmap_read(info->regmap_nv, MAX1720X_NRSENSE, &val);
442 	if (ret < 0) {
443 		dev_err(dev, "Failed to read sense resistor value\n");
444 		return ret;
445 	}
446 
447 	info->rsense = val;
448 	if (!info->rsense) {
449 		dev_warn(dev, "RSense not calibrated, set 10 mOhms!\n");
450 		info->rsense = 1000; /* in regs in 10^-5 */
451 	}
452 
453 	nvmem = devm_nvmem_register(dev, &nvmem_config);
454 	if (IS_ERR(nvmem)) {
455 		dev_err(dev, "Could not register nvmem!");
456 		return PTR_ERR(nvmem);
457 	}
458 
459 	return 0;
460 }
461 
462 static const struct power_supply_desc max1720x_bat_desc = {
463 	.name = "max1720x",
464 	.no_thermal = true,
465 	.type = POWER_SUPPLY_TYPE_BATTERY,
466 	.properties = max1720x_battery_props,
467 	.num_properties = ARRAY_SIZE(max1720x_battery_props),
468 	.get_property = max1720x_battery_get_property,
469 };
470 
471 static int max1720x_probe(struct i2c_client *client)
472 {
473 	struct power_supply_config psy_cfg = {};
474 	struct device *dev = &client->dev;
475 	struct max1720x_device_info *info;
476 	struct power_supply *bat;
477 	int ret;
478 
479 	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
480 	if (!info)
481 		return -ENOMEM;
482 
483 	psy_cfg.drv_data = info;
484 	psy_cfg.fwnode = dev_fwnode(dev);
485 	i2c_set_clientdata(client, info);
486 	info->regmap = devm_regmap_init_i2c(client, &max1720x_regmap_cfg);
487 	if (IS_ERR(info->regmap))
488 		return dev_err_probe(dev, PTR_ERR(info->regmap),
489 				     "regmap initialization failed\n");
490 
491 	ret = max1720x_probe_nvmem(client, info);
492 	if (ret)
493 		return dev_err_probe(dev, ret, "Failed to probe nvmem\n");
494 
495 	bat = devm_power_supply_register(dev, &max1720x_bat_desc, &psy_cfg);
496 	if (IS_ERR(bat))
497 		return dev_err_probe(dev, PTR_ERR(bat),
498 				     "Failed to register power supply\n");
499 
500 	return 0;
501 }
502 
503 static const struct of_device_id max1720x_of_match[] = {
504 	{ .compatible = "maxim,max17201" },
505 	{}
506 };
507 MODULE_DEVICE_TABLE(of, max1720x_of_match);
508 
509 static struct i2c_driver max1720x_i2c_driver = {
510 	.driver = {
511 		.name = "max1720x",
512 		.of_match_table = max1720x_of_match,
513 	},
514 	.probe = max1720x_probe,
515 };
516 module_i2c_driver(max1720x_i2c_driver);
517 
518 MODULE_LICENSE("GPL");
519 MODULE_AUTHOR("Dimitri Fedrau <dima.fedrau@gmail.com>");
520 MODULE_DESCRIPTION("Maxim MAX17201/MAX17205 Fuel Gauge IC driver");
521