1 // SPDX-License-Identifier: GPL-2.0 2 // BQ2515X Battery Charger Driver 3 // Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ 4 5 #include <linux/err.h> 6 #include <linux/i2c.h> 7 #include <linux/init.h> 8 #include <linux/kernel.h> 9 #include <linux/module.h> 10 #include <linux/gpio/consumer.h> 11 #include <linux/power_supply.h> 12 #include <linux/regmap.h> 13 #include <linux/types.h> 14 15 #define BQ2515X_MANUFACTURER "Texas Instruments" 16 17 #define BQ2515X_STAT0 0x00 18 #define BQ2515X_STAT1 0x01 19 #define BQ2515X_STAT2 0x02 20 #define BQ2515X_FLAG0 0x03 21 #define BQ2515X_FLAG1 0x04 22 #define BQ2515X_FLAG2 0x05 23 #define BQ2515X_FLAG3 0x06 24 #define BQ2515X_MASK0 0x07 25 #define BQ2515X_MASK1 0x08 26 #define BQ2515X_MASK2 0x09 27 #define BQ2515X_MASK3 0x0a 28 #define BQ2515X_VBAT_CTRL 0x12 29 #define BQ2515X_ICHG_CTRL 0x13 30 #define BQ2515X_PCHRGCTRL 0x14 31 #define BQ2515X_TERMCTRL 0x15 32 #define BQ2515X_BUVLO 0x16 33 #define BQ2515X_CHARGERCTRL0 0x17 34 #define BQ2515X_CHARGERCTRL1 0x18 35 #define BQ2515X_ILIMCTRL 0x19 36 #define BQ2515X_LDOCTRL 0x1d 37 #define BQ2515X_MRCTRL 0x30 38 #define BQ2515X_ICCTRL0 0x35 39 #define BQ2515X_ICCTRL1 0x36 40 #define BQ2515X_ICCTRL2 0x37 41 #define BQ2515X_ADCCTRL0 0x40 42 #define BQ2515X_ADCCTRL1 0x41 43 #define BQ2515X_ADC_VBAT_M 0x42 44 #define BQ2515X_ADC_VBAT_L 0x43 45 #define BQ2515X_ADC_TS_M 0x44 46 #define BQ2515X_ADC_TS_L 0x45 47 #define BQ2515X_ADC_ICHG_M 0x46 48 #define BQ2515X_ADC_ICHG_L 0x47 49 #define BQ2515X_ADC_ADCIN_M 0x48 50 #define BQ2515X_ADC_ADCIN_L 0x49 51 #define BQ2515X_ADC_VIN_M 0x4a 52 #define BQ2515X_ADC_VIN_L 0x4b 53 #define BQ2515X_ADC_PMID_M 0x4c 54 #define BQ2515X_ADC_PMID_L 0x4d 55 #define BQ2515X_ADC_IIN_M 0x4e 56 #define BQ2515X_ADC_IIN_L 0x4f 57 #define BQ2515X_ADC_COMP1_M 0x52 58 #define BQ2515X_ADC_COMP1_L 0X53 59 #define BQ2515X_ADC_COMP2_M 0X54 60 #define BQ2515X_ADC_COMP2_L 0x55 61 #define BQ2515X_ADC_COMP3_M 0x56 62 #define BQ2515X_ADC_COMP3_L 0x57 63 #define BQ2515X_ADC_READ_EN 0x58 64 #define BQ2515X_TS_FASTCHGCTRL 0x61 65 #define BQ2515X_TS_COLD 0x62 66 #define BQ2515X_TS_COOL 0x63 67 #define BQ2515X_TS_WARM 0x64 68 #define BQ2515X_TS_HOT 0x65 69 #define BQ2515X_DEVICE_ID 0x6f 70 71 #define BQ2515X_DEFAULT_ICHG_UA 10000 72 #define BQ25150_DEFAULT_ILIM_UA 100000 73 #define BQ25155_DEFAULT_ILIM_UA 500000 74 #define BQ2515X_DEFAULT_VBAT_REG_UV 4200000 75 #define BQ2515X_DEFAULT_IPRECHARGE_UA 2500 76 77 #define BQ2515X_DIVISOR 65536 78 #define BQ2515X_VBAT_BASE_VOLT 3600000 79 #define BQ2515X_VBAT_REG_MAX 4600000 80 #define BQ2515X_VBAT_REG_MIN 3600000 81 #define BQ2515X_VBAT_STEP_UV 10000 82 #define BQ2515X_UV_FACTOR 1000000 83 #define BQ2515X_VBAT_MULTIPLIER 6 84 #define BQ2515X_ICHG_DIVISOR 52429 85 #define BQ2515X_ICHG_CURR_STEP_THRESH_UA 318750 86 #define BQ2515X_ICHG_MIN_UA 0 87 #define BQ2515X_ICHG_MAX_UA 500000 88 #define BQ2515X_ICHG_RNG_1B0_UA 1250 89 #define BQ2515X_ICHG_RNG_1B1_UA 2500 90 #define BQ2515X_VLOWV_SEL_1B0_UV 3000000 91 #define BQ2515X_VLOWV_SEL_1B1_UV 2800000 92 #define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA 18750 93 #define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA 37500 94 #define BQ2515X_TWAKE2_MIN_US 1700000 95 #define BQ2515X_TWAKE2_MAX_US 2300000 96 97 #define BQ2515X_ILIM_150MA 0x2 98 #define BQ2515X_ILIM_MASK 0x7 99 #define BQ2515X_ILIM_MIN 50000 100 #define BQ2515X_ILIM_MAX 600000 101 #define BQ2515X_HEALTH_MASK 0xf 102 #define BQ2515X_ICHGRNG_MASK 0x80 103 #define BQ2515X_STAT0_MASK 0x0f 104 #define BQ2515X_STAT1_MASK 0x1f 105 #define BQ2515X_PRECHARGE_MASK 0x1f 106 107 #define BQ2515X_TS_HOT_STAT BIT(0) 108 #define BQ2515X_TS_WARM_STAT BIT(1) 109 #define BQ2515X_TS_COOL_STAT BIT(2) 110 #define BQ2515X_TS_COLD_STAT BIT(3) 111 #define BQ2515X_SAFETY_TIMER_EXP BIT(5) 112 113 #define BQ2515X_EN_VBAT_READ BIT(3) 114 #define BQ2515X_EN_ICHG_READ BIT(5) 115 116 #define BQ2515X_VIN_GOOD BIT(0) 117 #define BQ2515X_CHRG_DONE BIT(5) 118 #define BQ2515X_CV_CHRG_MODE BIT(6) 119 120 #define BQ2515X_VIN_OVP_FAULT_STAT BIT(7) 121 122 #define BQ2515X_WATCHDOG_DISABLE BIT(4) 123 124 #define BQ2515X_ICHARGE_RANGE BIT(7) 125 126 #define BQ2515X_VLOWV_SEL BIT(5) 127 128 #define BQ2515X_CHARGER_DISABLE BIT(0) 129 130 #define BQ2515X_HWRESET_14S_WD BIT(1) 131 132 static const int bq2515x_ilim_lvl_values[] = { 133 50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000 134 }; 135 136 /** 137 * struct bq2515x_init_data - 138 * @ilim: input current limit 139 * @ichg: fast charge current 140 * @vbatreg: battery regulation voltage 141 * @iprechg: precharge current 142 */ 143 struct bq2515x_init_data { 144 int ilim; 145 int ichg; 146 int vbatreg; 147 int iprechg; 148 }; 149 150 enum bq2515x_id { 151 BQ25150, 152 BQ25155, 153 }; 154 155 /** 156 * struct bq2515x_device - 157 * @mains: mains properties 158 * @battery: battery properties 159 * @regmap: register map structure 160 * @dev: device structure 161 * 162 * @reset_gpio: manual reset (MR) pin 163 * @powerdown_gpio: low power mode pin 164 * @ac_detect_gpio: power good (PG) pin 165 * @ce_gpio: charge enable (CE) pin 166 * 167 * @model_name: string value describing device model 168 * @device_id: value of device_id 169 * @mains_online: boolean value indicating power supply online 170 * 171 * @init_data: charger initialization data structure 172 */ 173 struct bq2515x_device { 174 struct power_supply *mains; 175 struct power_supply *battery; 176 struct regmap *regmap; 177 struct device *dev; 178 179 struct gpio_desc *reset_gpio; 180 struct gpio_desc *powerdown_gpio; 181 struct gpio_desc *ac_detect_gpio; 182 struct gpio_desc *ce_gpio; 183 184 char model_name[I2C_NAME_SIZE]; 185 int device_id; 186 bool mains_online; 187 188 struct bq2515x_init_data init_data; 189 }; 190 191 static const struct reg_default bq25150_reg_defaults[] = { 192 {BQ2515X_FLAG0, 0x0}, 193 {BQ2515X_FLAG1, 0x0}, 194 {BQ2515X_FLAG2, 0x0}, 195 {BQ2515X_FLAG3, 0x0}, 196 {BQ2515X_MASK0, 0x0}, 197 {BQ2515X_MASK1, 0x0}, 198 {BQ2515X_MASK2, 0x71}, 199 {BQ2515X_MASK3, 0x0}, 200 {BQ2515X_VBAT_CTRL, 0x3C}, 201 {BQ2515X_ICHG_CTRL, 0x8}, 202 {BQ2515X_PCHRGCTRL, 0x2}, 203 {BQ2515X_TERMCTRL, 0x14}, 204 {BQ2515X_BUVLO, 0x0}, 205 {BQ2515X_CHARGERCTRL0, 0x82}, 206 {BQ2515X_CHARGERCTRL1, 0x42}, 207 {BQ2515X_ILIMCTRL, 0x1}, 208 {BQ2515X_LDOCTRL, 0xB0}, 209 {BQ2515X_MRCTRL, 0x2A}, 210 {BQ2515X_ICCTRL0, 0x10}, 211 {BQ2515X_ICCTRL1, 0x0}, 212 {BQ2515X_ICCTRL2, 0x0}, 213 {BQ2515X_ADCCTRL0, 0x2}, 214 {BQ2515X_ADCCTRL1, 0x40}, 215 {BQ2515X_ADC_COMP1_M, 0x23}, 216 {BQ2515X_ADC_COMP1_L, 0x20}, 217 {BQ2515X_ADC_COMP2_M, 0x38}, 218 {BQ2515X_ADC_COMP2_L, 0x90}, 219 {BQ2515X_ADC_COMP3_M, 0x0}, 220 {BQ2515X_ADC_COMP3_L, 0x0}, 221 {BQ2515X_ADC_READ_EN, 0x0}, 222 {BQ2515X_TS_FASTCHGCTRL, 0x34}, 223 {BQ2515X_TS_COLD, 0x7C}, 224 {BQ2515X_TS_COOL, 0x6D}, 225 {BQ2515X_TS_WARM, 0x38}, 226 {BQ2515X_TS_HOT, 0x27}, 227 {BQ2515X_DEVICE_ID, 0x20}, 228 }; 229 230 static const struct reg_default bq25155_reg_defaults[] = { 231 {BQ2515X_FLAG0, 0x0}, 232 {BQ2515X_FLAG1, 0x0}, 233 {BQ2515X_FLAG2, 0x0}, 234 {BQ2515X_FLAG3, 0x0}, 235 {BQ2515X_MASK0, 0x0}, 236 {BQ2515X_MASK1, 0x0}, 237 {BQ2515X_MASK2, 0x71}, 238 {BQ2515X_MASK3, 0x0}, 239 {BQ2515X_VBAT_CTRL, 0x3C}, 240 {BQ2515X_ICHG_CTRL, 0x8}, 241 {BQ2515X_PCHRGCTRL, 0x2}, 242 {BQ2515X_TERMCTRL, 0x14}, 243 {BQ2515X_BUVLO, 0x0}, 244 {BQ2515X_CHARGERCTRL0, 0x82}, 245 {BQ2515X_CHARGERCTRL1, 0xC2}, 246 {BQ2515X_ILIMCTRL, 0x6}, 247 {BQ2515X_LDOCTRL, 0xB0}, 248 {BQ2515X_MRCTRL, 0x2A}, 249 {BQ2515X_ICCTRL0, 0x10}, 250 {BQ2515X_ICCTRL1, 0x0}, 251 {BQ2515X_ICCTRL2, 0x40}, 252 {BQ2515X_ADCCTRL0, 0x2}, 253 {BQ2515X_ADCCTRL1, 0x40}, 254 {BQ2515X_ADC_COMP1_M, 0x23}, 255 {BQ2515X_ADC_COMP1_L, 0x20}, 256 {BQ2515X_ADC_COMP2_M, 0x38}, 257 {BQ2515X_ADC_COMP2_L, 0x90}, 258 {BQ2515X_ADC_COMP3_M, 0x0}, 259 {BQ2515X_ADC_COMP3_L, 0x0}, 260 {BQ2515X_ADC_READ_EN, 0x0}, 261 {BQ2515X_TS_FASTCHGCTRL, 0x34}, 262 {BQ2515X_TS_COLD, 0x7C}, 263 {BQ2515X_TS_COOL, 0x6D}, 264 {BQ2515X_TS_WARM, 0x38}, 265 {BQ2515X_TS_HOT, 0x27}, 266 {BQ2515X_DEVICE_ID, 0x35}, 267 }; 268 269 static int bq2515x_wake_up(struct bq2515x_device *bq2515x) 270 { 271 int ret; 272 int val; 273 274 /* Read the STAT register if we can read it then the device is out 275 * of ship mode. If the register cannot be read then attempt to wake 276 * it up and enable the ADC. 277 */ 278 ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val); 279 if (ret) 280 return ret; 281 282 /* Need to toggle LP and bring device out of ship mode. The device 283 * will exit the ship mode when the MR pin is held low for at least 284 * t_WAKE2 as shown in section 8.3.7.1 of the datasheet. 285 */ 286 gpiod_set_value_cansleep(bq2515x->powerdown_gpio, 0); 287 288 gpiod_set_value_cansleep(bq2515x->reset_gpio, 0); 289 usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US); 290 gpiod_set_value_cansleep(bq2515x->reset_gpio, 1); 291 292 return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN, 293 (BQ2515X_EN_VBAT_READ | BQ2515X_EN_ICHG_READ)); 294 } 295 296 static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x) 297 { 298 bool dc = false; 299 unsigned int val; 300 int ret; 301 302 if (bq2515x->ac_detect_gpio) 303 val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio); 304 else { 305 ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val); 306 if (ret) 307 return ret; 308 } 309 310 dc = val & BQ2515X_VIN_GOOD; 311 312 ret = bq2515x->mains_online != dc; 313 314 bq2515x->mains_online = dc; 315 316 return ret; 317 } 318 319 static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x) 320 { 321 int ret; 322 323 ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0, 324 BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE); 325 if (ret) 326 return ret; 327 328 return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2, 329 BQ2515X_HWRESET_14S_WD, 0); 330 } 331 332 static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x) 333 { 334 int ret; 335 int vbat_msb; 336 int vbat_lsb; 337 uint32_t vbat_measurement; 338 339 if (!bq2515x->mains_online) 340 bq2515x_wake_up(bq2515x); 341 342 ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb); 343 if (ret) 344 return ret; 345 346 ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb); 347 if (ret) 348 return ret; 349 350 vbat_measurement = (vbat_msb << 8) | vbat_lsb; 351 352 return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) * 353 BQ2515X_VBAT_MULTIPLIER; 354 } 355 356 static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x) 357 { 358 int ret; 359 int ichg_msb; 360 int ichg_lsb; 361 uint32_t ichg_measurement; 362 u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA; 363 unsigned int ichg_reg_code, reg_code; 364 unsigned int icharge_range = 0, pchrgctrl; 365 unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV; 366 367 if (!bq2515x->mains_online) 368 return -ENODATA; 369 370 ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb); 371 if (ret) 372 return ret; 373 374 ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb); 375 if (ret) 376 return ret; 377 378 ichg_measurement = (ichg_msb << 8) | ichg_lsb; 379 380 ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo); 381 if (ret) 382 return ret; 383 384 vlowv_sel = buvlo & BQ2515X_VLOWV_SEL; 385 386 if (vlowv_sel) 387 vlowv = BQ2515X_VLOWV_SEL_1B1_UV; 388 389 if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) { 390 ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, 391 &pchrgctrl); 392 if (ret) 393 return ret; 394 395 reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK; 396 } else { 397 ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, 398 &ichg_reg_code); 399 if (ret) 400 return ret; 401 402 reg_code = ichg_reg_code; 403 } 404 405 ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); 406 if (ret) 407 return ret; 408 409 icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; 410 411 if (icharge_range) 412 ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA; 413 414 return reg_code * (ichg_multiplier * ichg_measurement / 415 BQ2515X_ICHG_DIVISOR); 416 } 417 418 static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x) 419 { 420 int ret; 421 int ce_pin; 422 int icctrl2; 423 int charger_disable; 424 425 ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio); 426 427 ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2); 428 if (ret) 429 return ret; 430 431 charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE; 432 433 if (charger_disable || ce_pin) 434 return true; 435 436 return false; 437 } 438 439 static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val) 440 { 441 gpiod_set_value_cansleep(bq2515x->ce_gpio, val); 442 443 return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2, 444 BQ2515X_CHARGER_DISABLE, val); 445 } 446 447 static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x) 448 { 449 int ret; 450 u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA; 451 unsigned int ichg_reg_code; 452 unsigned int pchrgctrl; 453 unsigned int icharge_range; 454 455 ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code); 456 if (ret) 457 return ret; 458 459 ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); 460 if (ret) 461 return ret; 462 463 icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; 464 465 if (icharge_range) 466 ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA; 467 468 return ichg_reg_code * ichg_multiplier; 469 } 470 471 static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x, 472 int val) 473 { 474 int ret; 475 unsigned int ichg_reg_code; 476 u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA; 477 unsigned int icharge_range = 0; 478 479 if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA) 480 return -EINVAL; 481 482 if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) { 483 ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA; 484 icharge_range = BQ2515X_ICHARGE_RANGE; 485 } 486 487 bq2515x_set_charge_disable(bq2515x, 1); 488 489 ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL, 490 BQ2515X_ICHARGE_RANGE, icharge_range); 491 if (ret) 492 return ret; 493 494 ichg_reg_code = val / ichg_multiplier; 495 496 ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code); 497 if (ret) 498 return ret; 499 500 return bq2515x_set_charge_disable(bq2515x, 0); 501 } 502 503 static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x) 504 { 505 int ret; 506 unsigned int pchrgctrl; 507 unsigned int icharge_range; 508 u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA; 509 unsigned int precharge_reg_code; 510 511 ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); 512 if (ret) 513 return ret; 514 515 icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; 516 517 if (icharge_range) 518 precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA; 519 520 precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK; 521 522 return precharge_reg_code * precharge_multiplier; 523 } 524 525 static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x, 526 int val) 527 { 528 int ret; 529 unsigned int pchrgctrl; 530 unsigned int icharge_range; 531 unsigned int precharge_reg_code; 532 unsigned int precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA; 533 unsigned int precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA; 534 535 ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); 536 if (ret) 537 return ret; 538 539 icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; 540 541 if (icharge_range) { 542 precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA; 543 precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA; 544 } else { 545 precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA; 546 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA; 547 } 548 if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA) 549 return -EINVAL; 550 551 precharge_reg_code = val / precharge_multiplier; 552 553 ret = bq2515x_set_charge_disable(bq2515x, 1); 554 if (ret) 555 return ret; 556 557 ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL, 558 BQ2515X_PRECHARGE_MASK, precharge_reg_code); 559 if (ret) 560 return ret; 561 562 return bq2515x_set_charge_disable(bq2515x, 0); 563 } 564 565 static int bq2515x_charging_status(struct bq2515x_device *bq2515x, 566 union power_supply_propval *val) 567 { 568 bool status0_no_fault; 569 bool status1_no_fault; 570 bool ce_status; 571 bool charge_done; 572 unsigned int status; 573 int ret; 574 575 if (!bq2515x->mains_online) { 576 val->intval = POWER_SUPPLY_STATUS_DISCHARGING; 577 return 0; 578 } 579 580 ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status); 581 if (ret) 582 return ret; 583 584 /* 585 * The code block below is used to determine if any faults from the 586 * STAT0 register are disbaling charging or if the charge has completed 587 * according to the CHARGE_DONE_STAT bit. 588 */ 589 if (((status & BQ2515X_STAT0_MASK) == true) & 590 ((status & BQ2515X_CHRG_DONE) == false)) { 591 status0_no_fault = true; 592 charge_done = false; 593 } else if (status & BQ2515X_CHRG_DONE) { 594 charge_done = true; 595 status0_no_fault = false; 596 } else { 597 status0_no_fault = false; 598 charge_done = false; 599 } 600 601 ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status); 602 if (ret) 603 return ret; 604 /* 605 * The code block below is used to determine if any faults from the 606 * STAT1 register are disbaling charging 607 */ 608 if ((status & BQ2515X_STAT1_MASK) == false) 609 status1_no_fault = true; 610 else 611 status1_no_fault = false; 612 613 ce_status = (!bq2515x_get_charge_disable(bq2515x)); 614 615 /* 616 * If there are no faults and charging is enabled, then status is 617 * charging. Otherwise, if charging is complete, then status is full. 618 * Otherwise, if a fault exists or charging is disabled, then status is 619 * not charging 620 */ 621 if (status0_no_fault & status1_no_fault & ce_status) 622 val->intval = POWER_SUPPLY_STATUS_CHARGING; 623 else if (charge_done) 624 val->intval = POWER_SUPPLY_STATUS_FULL; 625 else if (!(status0_no_fault & status1_no_fault & ce_status)) 626 val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; 627 628 return 0; 629 } 630 631 static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x) 632 { 633 int vbat_reg_code; 634 int ret; 635 636 ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code); 637 if (ret) 638 return ret; 639 640 return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV; 641 } 642 643 static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val) 644 { 645 int vbat_reg_code; 646 647 if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN) 648 return -EINVAL; 649 650 vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV; 651 652 return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code); 653 } 654 655 static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x) 656 { 657 int ret; 658 int ilimctrl; 659 660 ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl); 661 if (ret) 662 return ret; 663 664 return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK]; 665 } 666 667 static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val) 668 { 669 int i = 0; 670 unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values); 671 672 for (i = array_size - 1; i > 0; i--) { 673 if (val >= bq2515x_ilim_lvl_values[i]) 674 break; 675 } 676 return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i); 677 } 678 679 static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy, 680 enum power_supply_property prop) 681 { 682 switch (prop) { 683 case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: 684 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: 685 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: 686 case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: 687 return true; 688 default: 689 return false; 690 } 691 } 692 693 static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x, 694 union power_supply_propval *val) 695 { 696 int health = POWER_SUPPLY_HEALTH_GOOD; 697 int ret; 698 unsigned int stat1; 699 unsigned int flag3; 700 701 if (!bq2515x->mains_online) 702 bq2515x_wake_up(bq2515x); 703 704 ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3); 705 if (ret) 706 return ret; 707 708 ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1); 709 if (ret) 710 return ret; 711 712 if (stat1 & BQ2515X_HEALTH_MASK) { 713 switch (stat1 & BQ2515X_HEALTH_MASK) { 714 case BQ2515X_TS_HOT_STAT: 715 health = POWER_SUPPLY_HEALTH_HOT; 716 break; 717 case BQ2515X_TS_WARM_STAT: 718 health = POWER_SUPPLY_HEALTH_WARM; 719 break; 720 case BQ2515X_TS_COOL_STAT: 721 health = POWER_SUPPLY_HEALTH_COOL; 722 break; 723 case BQ2515X_TS_COLD_STAT: 724 health = POWER_SUPPLY_HEALTH_COLD; 725 break; 726 default: 727 health = POWER_SUPPLY_HEALTH_UNKNOWN; 728 break; 729 } 730 } 731 732 if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT) 733 health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; 734 735 if (flag3 & BQ2515X_SAFETY_TIMER_EXP) 736 health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; 737 738 val->intval = health; 739 return 0; 740 } 741 742 static int bq2515x_mains_set_property(struct power_supply *psy, 743 enum power_supply_property prop, 744 const union power_supply_propval *val) 745 { 746 struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy); 747 int ret; 748 749 switch (prop) { 750 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: 751 ret = bq2515x_set_batt_reg(bq2515x, val->intval); 752 break; 753 754 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: 755 ret = bq2515x_set_const_charge_current(bq2515x, val->intval); 756 break; 757 758 case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: 759 ret = bq2515x_set_ilim_lvl(bq2515x, val->intval); 760 break; 761 762 case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: 763 ret = bq2515x_set_precharge_current(bq2515x, val->intval); 764 break; 765 766 default: 767 return -EINVAL; 768 } 769 770 return ret; 771 } 772 773 static int bq2515x_mains_get_property(struct power_supply *psy, 774 enum power_supply_property prop, 775 union power_supply_propval *val) 776 { 777 struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy); 778 int ret = 0; 779 780 switch (prop) { 781 782 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: 783 ret = bq2515x_get_const_charge_current(bq2515x); 784 if (ret < 0) 785 return ret; 786 787 val->intval = ret; 788 break; 789 790 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: 791 ret = bq2515x_get_batt_reg(bq2515x); 792 if (ret < 0) 793 return ret; 794 val->intval = ret; 795 break; 796 797 case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: 798 ret = bq2515x_get_precharge_current(bq2515x); 799 if (ret < 0) 800 return ret; 801 val->intval = ret; 802 break; 803 804 case POWER_SUPPLY_PROP_ONLINE: 805 val->intval = bq2515x->mains_online; 806 break; 807 808 case POWER_SUPPLY_PROP_HEALTH: 809 ret = bq2515x_charger_get_health(bq2515x, val); 810 if (ret) 811 val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; 812 break; 813 814 case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: 815 ret = bq2515x_get_ilim_lvl(bq2515x); 816 if (ret < 0) 817 return ret; 818 val->intval = ret; 819 break; 820 821 case POWER_SUPPLY_PROP_MODEL_NAME: 822 val->strval = bq2515x->model_name; 823 break; 824 825 case POWER_SUPPLY_PROP_MANUFACTURER: 826 val->strval = BQ2515X_MANUFACTURER; 827 break; 828 829 case POWER_SUPPLY_PROP_STATUS: 830 ret = bq2515x_charging_status(bq2515x, val); 831 if (ret) 832 return ret; 833 break; 834 835 default: 836 return -EINVAL; 837 } 838 839 return ret; 840 } 841 842 static int bq2515x_battery_get_property(struct power_supply *psy, 843 enum power_supply_property prop, 844 union power_supply_propval *val) 845 { 846 struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy); 847 int ret; 848 849 ret = bq2515x_update_ps_status(bq2515x); 850 if (ret) 851 return ret; 852 853 switch (prop) { 854 855 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: 856 ret = bq2515x->init_data.vbatreg; 857 if (ret < 0) 858 return ret; 859 val->intval = ret; 860 break; 861 862 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: 863 ret = bq2515x->init_data.ichg; 864 if (ret < 0) 865 return ret; 866 val->intval = ret; 867 break; 868 869 case POWER_SUPPLY_PROP_VOLTAGE_NOW: 870 ret = bq2515x_get_battery_voltage_now(bq2515x); 871 if (ret < 0) 872 return ret; 873 val->intval = ret; 874 break; 875 876 case POWER_SUPPLY_PROP_CURRENT_NOW: 877 ret = bq2515x_get_battery_current_now(bq2515x); 878 if (ret < 0) 879 return ret; 880 val->intval = ret; 881 break; 882 883 default: 884 return -EINVAL; 885 } 886 return 0; 887 } 888 889 static const enum power_supply_property bq2515x_battery_properties[] = { 890 POWER_SUPPLY_PROP_VOLTAGE_NOW, 891 POWER_SUPPLY_PROP_CURRENT_NOW, 892 POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, 893 POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, 894 }; 895 896 static const enum power_supply_property bq2515x_mains_properties[] = { 897 POWER_SUPPLY_PROP_ONLINE, 898 POWER_SUPPLY_PROP_STATUS, 899 POWER_SUPPLY_PROP_HEALTH, 900 POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, 901 POWER_SUPPLY_PROP_MODEL_NAME, 902 POWER_SUPPLY_PROP_MANUFACTURER, 903 POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, 904 POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, 905 POWER_SUPPLY_PROP_PRECHARGE_CURRENT, 906 }; 907 908 static const struct power_supply_desc bq2515x_mains_desc = { 909 .name = "bq2515x-mains", 910 .type = POWER_SUPPLY_TYPE_MAINS, 911 .get_property = bq2515x_mains_get_property, 912 .set_property = bq2515x_mains_set_property, 913 .properties = bq2515x_mains_properties, 914 .num_properties = ARRAY_SIZE(bq2515x_mains_properties), 915 .property_is_writeable = bq2515x_power_supply_property_is_writeable, 916 }; 917 918 static const struct power_supply_desc bq2515x_battery_desc = { 919 .name = "bq2515x-battery", 920 .type = POWER_SUPPLY_TYPE_BATTERY, 921 .get_property = bq2515x_battery_get_property, 922 .properties = bq2515x_battery_properties, 923 .num_properties = ARRAY_SIZE(bq2515x_battery_properties), 924 .property_is_writeable = bq2515x_power_supply_property_is_writeable, 925 }; 926 927 static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x, 928 struct device *dev, struct power_supply_config psy_cfg) 929 { 930 bq2515x->mains = devm_power_supply_register(bq2515x->dev, 931 &bq2515x_mains_desc, 932 &psy_cfg); 933 if (IS_ERR(bq2515x->mains)) 934 return -EINVAL; 935 936 bq2515x->battery = devm_power_supply_register(bq2515x->dev, 937 &bq2515x_battery_desc, 938 &psy_cfg); 939 if (IS_ERR(bq2515x->battery)) 940 return -EINVAL; 941 942 return 0; 943 } 944 945 static int bq2515x_hw_init(struct bq2515x_device *bq2515x) 946 { 947 int ret; 948 struct power_supply_battery_info *bat_info; 949 950 ret = bq2515x_disable_watchdog_timers(bq2515x); 951 if (ret) 952 return ret; 953 954 if (bq2515x->init_data.ilim) { 955 ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim); 956 if (ret) 957 return ret; 958 } 959 960 ret = power_supply_get_battery_info(bq2515x->mains, &bat_info); 961 if (ret) { 962 dev_warn(bq2515x->dev, "battery info missing, default values will be applied\n"); 963 964 bq2515x->init_data.ichg = BQ2515X_DEFAULT_ICHG_UA; 965 966 bq2515x->init_data.vbatreg = BQ2515X_DEFAULT_VBAT_REG_UV; 967 968 bq2515x->init_data.iprechg = BQ2515X_DEFAULT_IPRECHARGE_UA; 969 970 } else { 971 bq2515x->init_data.ichg = 972 bat_info->constant_charge_current_max_ua; 973 974 bq2515x->init_data.vbatreg = 975 bat_info->constant_charge_voltage_max_uv; 976 977 bq2515x->init_data.iprechg = 978 bat_info->precharge_current_ua; 979 } 980 981 ret = bq2515x_set_const_charge_current(bq2515x, 982 bq2515x->init_data.ichg); 983 if (ret) 984 return ret; 985 986 ret = bq2515x_set_batt_reg(bq2515x, bq2515x->init_data.vbatreg); 987 if (ret) 988 return ret; 989 990 return bq2515x_set_precharge_current(bq2515x, 991 bq2515x->init_data.iprechg); 992 } 993 994 static int bq2515x_read_properties(struct bq2515x_device *bq2515x) 995 { 996 int ret; 997 998 ret = device_property_read_u32(bq2515x->dev, 999 "input-current-limit-microamp", 1000 &bq2515x->init_data.ilim); 1001 if (ret) { 1002 switch (bq2515x->device_id) { 1003 case BQ25150: 1004 bq2515x->init_data.ilim = BQ25150_DEFAULT_ILIM_UA; 1005 break; 1006 case BQ25155: 1007 bq2515x->init_data.ilim = BQ25155_DEFAULT_ILIM_UA; 1008 break; 1009 } 1010 } 1011 1012 bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev, 1013 "ac-detect", GPIOD_IN); 1014 if (IS_ERR(bq2515x->ac_detect_gpio)) { 1015 ret = PTR_ERR(bq2515x->ac_detect_gpio); 1016 dev_err(bq2515x->dev, "Failed to get ac detect"); 1017 return ret; 1018 } 1019 1020 bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev, 1021 "reset", GPIOD_OUT_LOW); 1022 if (IS_ERR(bq2515x->reset_gpio)) { 1023 ret = PTR_ERR(bq2515x->reset_gpio); 1024 dev_err(bq2515x->dev, "Failed to get reset"); 1025 return ret; 1026 } 1027 1028 bq2515x->powerdown_gpio = devm_gpiod_get_optional(bq2515x->dev, 1029 "powerdown", GPIOD_OUT_LOW); 1030 if (IS_ERR(bq2515x->powerdown_gpio)) { 1031 ret = PTR_ERR(bq2515x->powerdown_gpio); 1032 dev_err(bq2515x->dev, "Failed to get powerdown"); 1033 return ret; 1034 } 1035 1036 bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev, 1037 "charge-enable", 1038 GPIOD_OUT_LOW); 1039 if (IS_ERR(bq2515x->ce_gpio)) { 1040 ret = PTR_ERR(bq2515x->ce_gpio); 1041 dev_err(bq2515x->dev, "Failed to get ce"); 1042 return ret; 1043 } 1044 1045 return 0; 1046 } 1047 1048 static bool bq2515x_volatile_register(struct device *dev, unsigned int reg) 1049 { 1050 switch (reg) { 1051 case BQ2515X_STAT0 ... BQ2515X_FLAG3: 1052 case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L: 1053 return true; 1054 default: 1055 return false; 1056 } 1057 } 1058 1059 static const struct regmap_config bq25150_regmap_config = { 1060 .reg_bits = 8, 1061 .val_bits = 8, 1062 1063 .max_register = BQ2515X_DEVICE_ID, 1064 .reg_defaults = bq25150_reg_defaults, 1065 .num_reg_defaults = ARRAY_SIZE(bq25150_reg_defaults), 1066 .cache_type = REGCACHE_RBTREE, 1067 .volatile_reg = bq2515x_volatile_register, 1068 }; 1069 1070 static const struct regmap_config bq25155_regmap_config = { 1071 .reg_bits = 8, 1072 .val_bits = 8, 1073 1074 .max_register = BQ2515X_DEVICE_ID, 1075 .reg_defaults = bq25155_reg_defaults, 1076 .num_reg_defaults = ARRAY_SIZE(bq25155_reg_defaults), 1077 .cache_type = REGCACHE_RBTREE, 1078 .volatile_reg = bq2515x_volatile_register, 1079 }; 1080 1081 static int bq2515x_probe(struct i2c_client *client) 1082 { 1083 const struct i2c_device_id *id = i2c_client_get_device_id(client); 1084 struct device *dev = &client->dev; 1085 struct bq2515x_device *bq2515x; 1086 struct power_supply_config charger_cfg = {}; 1087 int ret; 1088 1089 bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL); 1090 if (!bq2515x) 1091 return -ENOMEM; 1092 1093 bq2515x->dev = dev; 1094 1095 strncpy(bq2515x->model_name, id->name, I2C_NAME_SIZE); 1096 1097 bq2515x->device_id = id->driver_data; 1098 1099 switch (bq2515x->device_id) { 1100 case BQ25150: 1101 bq2515x->regmap = devm_regmap_init_i2c(client, 1102 &bq25150_regmap_config); 1103 break; 1104 case BQ25155: 1105 bq2515x->regmap = devm_regmap_init_i2c(client, 1106 &bq25155_regmap_config); 1107 break; 1108 } 1109 1110 if (IS_ERR(bq2515x->regmap)) { 1111 dev_err(dev, "failed to allocate register map\n"); 1112 return PTR_ERR(bq2515x->regmap); 1113 } 1114 1115 i2c_set_clientdata(client, bq2515x); 1116 1117 charger_cfg.drv_data = bq2515x; 1118 charger_cfg.of_node = dev->of_node; 1119 1120 ret = bq2515x_read_properties(bq2515x); 1121 if (ret) { 1122 dev_err(dev, "Failed to read device tree properties %d\n", 1123 ret); 1124 return ret; 1125 } 1126 1127 ret = bq2515x_power_supply_register(bq2515x, dev, charger_cfg); 1128 if (ret) { 1129 dev_err(dev, "failed to register power supply\n"); 1130 return ret; 1131 } 1132 1133 ret = bq2515x_hw_init(bq2515x); 1134 if (ret) { 1135 dev_err(dev, "Cannot initialize the chip\n"); 1136 return ret; 1137 } 1138 1139 return 0; 1140 } 1141 1142 static const struct i2c_device_id bq2515x_i2c_ids[] = { 1143 { "bq25150", BQ25150, }, 1144 { "bq25155", BQ25155, }, 1145 {}, 1146 }; 1147 MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids); 1148 1149 static const struct of_device_id bq2515x_of_match[] = { 1150 { .compatible = "ti,bq25150", }, 1151 { .compatible = "ti,bq25155", }, 1152 { }, 1153 }; 1154 MODULE_DEVICE_TABLE(of, bq2515x_of_match); 1155 1156 static struct i2c_driver bq2515x_driver = { 1157 .driver = { 1158 .name = "bq2515x-charger", 1159 .of_match_table = bq2515x_of_match, 1160 }, 1161 .probe = bq2515x_probe, 1162 .id_table = bq2515x_i2c_ids, 1163 }; 1164 module_i2c_driver(bq2515x_driver); 1165 1166 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); 1167 MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-matos@ti.com>"); 1168 MODULE_DESCRIPTION("BQ2515X charger driver"); 1169 MODULE_LICENSE("GPL v2"); 1170