xref: /linux/drivers/power/reset/keystone-reset.c (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  * TI keystone reboot driver
3  *
4  * Copyright (C) 2014 Texas Instruments Incorporated. http://www.ti.com/
5  *
6  * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12 
13 #include <linux/io.h>
14 #include <linux/module.h>
15 #include <linux/notifier.h>
16 #include <linux/reboot.h>
17 #include <linux/regmap.h>
18 #include <linux/mfd/syscon.h>
19 #include <linux/of_platform.h>
20 
21 #define RSTYPE_RG			0x0
22 #define RSCTRL_RG			0x4
23 #define RSCFG_RG			0x8
24 #define RSISO_RG			0xc
25 
26 #define RSCTRL_KEY_MASK			0x0000ffff
27 #define RSCTRL_RESET_MASK		BIT(16)
28 #define RSCTRL_KEY			0x5a69
29 
30 #define RSMUX_OMODE_MASK		0xe
31 #define RSMUX_OMODE_RESET_ON		0xa
32 #define RSMUX_OMODE_RESET_OFF		0x0
33 #define RSMUX_LOCK_MASK			0x1
34 #define RSMUX_LOCK_SET			0x1
35 
36 #define RSCFG_RSTYPE_SOFT		0x300f
37 #define RSCFG_RSTYPE_HARD		0x0
38 
39 #define WDT_MUX_NUMBER			0x4
40 
41 static int rspll_offset;
42 static struct regmap *pllctrl_regs;
43 
44 /**
45  * rsctrl_enable_rspll_write - enable access to RSCTRL, RSCFG
46  * To be able to access to RSCTRL, RSCFG registers
47  * we have to write a key before
48  */
49 static inline int rsctrl_enable_rspll_write(void)
50 {
51 	return regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
52 				  RSCTRL_KEY_MASK, RSCTRL_KEY);
53 }
54 
55 static int rsctrl_restart_handler(struct notifier_block *this,
56 				  unsigned long mode, void *cmd)
57 {
58 	/* enable write access to RSTCTRL */
59 	rsctrl_enable_rspll_write();
60 
61 	/* reset the SOC */
62 	regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
63 			   RSCTRL_RESET_MASK, 0);
64 
65 	return NOTIFY_DONE;
66 }
67 
68 static struct notifier_block rsctrl_restart_nb = {
69 	.notifier_call = rsctrl_restart_handler,
70 	.priority = 128,
71 };
72 
73 static const struct of_device_id rsctrl_of_match[] = {
74 	{.compatible = "ti,keystone-reset", },
75 	{},
76 };
77 
78 static int rsctrl_probe(struct platform_device *pdev)
79 {
80 	int i;
81 	int ret;
82 	u32 val;
83 	unsigned int rg;
84 	u32 rsmux_offset;
85 	struct regmap *devctrl_regs;
86 	struct device *dev = &pdev->dev;
87 	struct device_node *np = dev->of_node;
88 
89 	if (!np)
90 		return -ENODEV;
91 
92 	/* get regmaps */
93 	pllctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pll");
94 	if (IS_ERR(pllctrl_regs))
95 		return PTR_ERR(pllctrl_regs);
96 
97 	devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-dev");
98 	if (IS_ERR(devctrl_regs))
99 		return PTR_ERR(devctrl_regs);
100 
101 	ret = of_property_read_u32_index(np, "ti,syscon-pll", 1, &rspll_offset);
102 	if (ret) {
103 		dev_err(dev, "couldn't read the reset pll offset!\n");
104 		return -EINVAL;
105 	}
106 
107 	ret = of_property_read_u32_index(np, "ti,syscon-dev", 1, &rsmux_offset);
108 	if (ret) {
109 		dev_err(dev, "couldn't read the rsmux offset!\n");
110 		return -EINVAL;
111 	}
112 
113 	/* set soft/hard reset */
114 	val = of_property_read_bool(np, "ti,soft-reset");
115 	val = val ? RSCFG_RSTYPE_SOFT : RSCFG_RSTYPE_HARD;
116 
117 	ret = rsctrl_enable_rspll_write();
118 	if (ret)
119 		return ret;
120 
121 	ret = regmap_write(pllctrl_regs, rspll_offset + RSCFG_RG, val);
122 	if (ret)
123 		return ret;
124 
125 	/* disable a reset isolation for all module clocks */
126 	ret = regmap_write(pllctrl_regs, rspll_offset + RSISO_RG, 0);
127 	if (ret)
128 		return ret;
129 
130 	/* enable a reset for watchdogs from wdt-list */
131 	for (i = 0; i < WDT_MUX_NUMBER; i++) {
132 		ret = of_property_read_u32_index(np, "ti,wdt-list", i, &val);
133 		if (ret == -EOVERFLOW && !i) {
134 			dev_err(dev, "ti,wdt-list property has to contain at"
135 				"least one entry\n");
136 			return -EINVAL;
137 		} else if (ret) {
138 			break;
139 		}
140 
141 		if (val >= WDT_MUX_NUMBER) {
142 			dev_err(dev, "ti,wdt-list property can contain"
143 				"only numbers < 4\n");
144 			return -EINVAL;
145 		}
146 
147 		rg = rsmux_offset + val * 4;
148 
149 		ret = regmap_update_bits(devctrl_regs, rg, RSMUX_OMODE_MASK,
150 					 RSMUX_OMODE_RESET_ON |
151 					 RSMUX_LOCK_SET);
152 		if (ret)
153 			return ret;
154 	}
155 
156 	ret = register_restart_handler(&rsctrl_restart_nb);
157 	if (ret)
158 		dev_err(dev, "cannot register restart handler (err=%d)\n", ret);
159 
160 	return ret;
161 }
162 
163 static struct platform_driver rsctrl_driver = {
164 	.probe = rsctrl_probe,
165 	.driver = {
166 		.name = KBUILD_MODNAME,
167 		.of_match_table = rsctrl_of_match,
168 	},
169 };
170 module_platform_driver(rsctrl_driver);
171 
172 MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>");
173 MODULE_DESCRIPTION("Texas Instruments keystone reset driver");
174 MODULE_LICENSE("GPL v2");
175 MODULE_ALIAS("platform:" KBUILD_MODNAME);
176