xref: /linux/drivers/power/reset/keystone-reset.c (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * TI keystone reboot driver
4  *
5  * Copyright (C) 2014 Texas Instruments Incorporated. https://www.ti.com/
6  *
7  * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
8  */
9 
10 #include <linux/io.h>
11 #include <linux/module.h>
12 #include <linux/notifier.h>
13 #include <linux/platform_device.h>
14 #include <linux/reboot.h>
15 #include <linux/regmap.h>
16 #include <linux/mfd/syscon.h>
17 #include <linux/of.h>
18 
19 #define RSTYPE_RG			0x0
20 #define RSCTRL_RG			0x4
21 #define RSCFG_RG			0x8
22 #define RSISO_RG			0xc
23 
24 #define RSCTRL_KEY_MASK			0x0000ffff
25 #define RSCTRL_RESET_MASK		BIT(16)
26 #define RSCTRL_KEY			0x5a69
27 
28 #define RSMUX_OMODE_MASK		0xe
29 #define RSMUX_OMODE_RESET_ON		0xa
30 #define RSMUX_OMODE_RESET_OFF		0x0
31 #define RSMUX_LOCK_MASK			0x1
32 #define RSMUX_LOCK_SET			0x1
33 
34 #define RSCFG_RSTYPE_SOFT		0x300f
35 #define RSCFG_RSTYPE_HARD		0x0
36 
37 #define WDT_MUX_NUMBER			0x4
38 
39 static int rspll_offset;
40 static struct regmap *pllctrl_regs;
41 
42 /**
43  * rsctrl_enable_rspll_write - enable access to RSCTRL, RSCFG
44  * To be able to access to RSCTRL, RSCFG registers
45  * we have to write a key before
46  */
47 static inline int rsctrl_enable_rspll_write(void)
48 {
49 	return regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
50 				  RSCTRL_KEY_MASK, RSCTRL_KEY);
51 }
52 
53 static int rsctrl_restart_handler(struct notifier_block *this,
54 				  unsigned long mode, void *cmd)
55 {
56 	/* enable write access to RSTCTRL */
57 	rsctrl_enable_rspll_write();
58 
59 	/* reset the SOC */
60 	regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
61 			   RSCTRL_RESET_MASK, 0);
62 
63 	return NOTIFY_DONE;
64 }
65 
66 static struct notifier_block rsctrl_restart_nb = {
67 	.notifier_call = rsctrl_restart_handler,
68 	.priority = 128,
69 };
70 
71 static const struct of_device_id rsctrl_of_match[] = {
72 	{.compatible = "ti,keystone-reset", },
73 	{},
74 };
75 MODULE_DEVICE_TABLE(of, rsctrl_of_match);
76 
77 static int rsctrl_probe(struct platform_device *pdev)
78 {
79 	int i;
80 	int ret;
81 	u32 val;
82 	unsigned int rg;
83 	u32 rsmux_offset;
84 	struct regmap *devctrl_regs;
85 	struct device *dev = &pdev->dev;
86 	struct device_node *np = dev->of_node;
87 
88 	if (!np)
89 		return -ENODEV;
90 
91 	/* get regmaps */
92 	pllctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pll");
93 	if (IS_ERR(pllctrl_regs))
94 		return PTR_ERR(pllctrl_regs);
95 
96 	devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-dev");
97 	if (IS_ERR(devctrl_regs))
98 		return PTR_ERR(devctrl_regs);
99 
100 	ret = of_property_read_u32_index(np, "ti,syscon-pll", 1, &rspll_offset);
101 	if (ret) {
102 		dev_err(dev, "couldn't read the reset pll offset!\n");
103 		return -EINVAL;
104 	}
105 
106 	ret = of_property_read_u32_index(np, "ti,syscon-dev", 1, &rsmux_offset);
107 	if (ret) {
108 		dev_err(dev, "couldn't read the rsmux offset!\n");
109 		return -EINVAL;
110 	}
111 
112 	/* set soft/hard reset */
113 	val = of_property_read_bool(np, "ti,soft-reset");
114 	val = val ? RSCFG_RSTYPE_SOFT : RSCFG_RSTYPE_HARD;
115 
116 	ret = rsctrl_enable_rspll_write();
117 	if (ret)
118 		return ret;
119 
120 	ret = regmap_write(pllctrl_regs, rspll_offset + RSCFG_RG, val);
121 	if (ret)
122 		return ret;
123 
124 	/* disable a reset isolation for all module clocks */
125 	ret = regmap_write(pllctrl_regs, rspll_offset + RSISO_RG, 0);
126 	if (ret)
127 		return ret;
128 
129 	/* enable a reset for watchdogs from wdt-list */
130 	for (i = 0; i < WDT_MUX_NUMBER; i++) {
131 		ret = of_property_read_u32_index(np, "ti,wdt-list", i, &val);
132 		if (ret == -EOVERFLOW && !i) {
133 			dev_err(dev, "ti,wdt-list property has to contain at"
134 				"least one entry\n");
135 			return -EINVAL;
136 		} else if (ret) {
137 			break;
138 		}
139 
140 		if (val >= WDT_MUX_NUMBER) {
141 			dev_err(dev, "ti,wdt-list property can contain "
142 				"only numbers < 4\n");
143 			return -EINVAL;
144 		}
145 
146 		rg = rsmux_offset + val * 4;
147 
148 		ret = regmap_update_bits(devctrl_regs, rg, RSMUX_OMODE_MASK,
149 					 RSMUX_OMODE_RESET_ON |
150 					 RSMUX_LOCK_SET);
151 		if (ret)
152 			return ret;
153 	}
154 
155 	ret = register_restart_handler(&rsctrl_restart_nb);
156 	if (ret)
157 		dev_err(dev, "cannot register restart handler (err=%d)\n", ret);
158 
159 	return ret;
160 }
161 
162 static struct platform_driver rsctrl_driver = {
163 	.probe = rsctrl_probe,
164 	.driver = {
165 		.name = KBUILD_MODNAME,
166 		.of_match_table = rsctrl_of_match,
167 	},
168 };
169 module_platform_driver(rsctrl_driver);
170 
171 MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>");
172 MODULE_DESCRIPTION("Texas Instruments keystone reset driver");
173 MODULE_ALIAS("platform:" KBUILD_MODNAME);
174