xref: /linux/drivers/power/reset/keystone-reset.c (revision 52990390f91c1c39ca742fc8f390b29891d95127)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * TI keystone reboot driver
4  *
5  * Copyright (C) 2014 Texas Instruments Incorporated. https://www.ti.com/
6  *
7  * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
8  */
9 
10 #include <linux/io.h>
11 #include <linux/module.h>
12 #include <linux/notifier.h>
13 #include <linux/reboot.h>
14 #include <linux/regmap.h>
15 #include <linux/mfd/syscon.h>
16 #include <linux/of_platform.h>
17 
18 #define RSTYPE_RG			0x0
19 #define RSCTRL_RG			0x4
20 #define RSCFG_RG			0x8
21 #define RSISO_RG			0xc
22 
23 #define RSCTRL_KEY_MASK			0x0000ffff
24 #define RSCTRL_RESET_MASK		BIT(16)
25 #define RSCTRL_KEY			0x5a69
26 
27 #define RSMUX_OMODE_MASK		0xe
28 #define RSMUX_OMODE_RESET_ON		0xa
29 #define RSMUX_OMODE_RESET_OFF		0x0
30 #define RSMUX_LOCK_MASK			0x1
31 #define RSMUX_LOCK_SET			0x1
32 
33 #define RSCFG_RSTYPE_SOFT		0x300f
34 #define RSCFG_RSTYPE_HARD		0x0
35 
36 #define WDT_MUX_NUMBER			0x4
37 
38 static int rspll_offset;
39 static struct regmap *pllctrl_regs;
40 
41 /**
42  * rsctrl_enable_rspll_write - enable access to RSCTRL, RSCFG
43  * To be able to access to RSCTRL, RSCFG registers
44  * we have to write a key before
45  */
46 static inline int rsctrl_enable_rspll_write(void)
47 {
48 	return regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
49 				  RSCTRL_KEY_MASK, RSCTRL_KEY);
50 }
51 
52 static int rsctrl_restart_handler(struct notifier_block *this,
53 				  unsigned long mode, void *cmd)
54 {
55 	/* enable write access to RSTCTRL */
56 	rsctrl_enable_rspll_write();
57 
58 	/* reset the SOC */
59 	regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
60 			   RSCTRL_RESET_MASK, 0);
61 
62 	return NOTIFY_DONE;
63 }
64 
65 static struct notifier_block rsctrl_restart_nb = {
66 	.notifier_call = rsctrl_restart_handler,
67 	.priority = 128,
68 };
69 
70 static const struct of_device_id rsctrl_of_match[] = {
71 	{.compatible = "ti,keystone-reset", },
72 	{},
73 };
74 MODULE_DEVICE_TABLE(of, rsctrl_of_match);
75 
76 static int rsctrl_probe(struct platform_device *pdev)
77 {
78 	int i;
79 	int ret;
80 	u32 val;
81 	unsigned int rg;
82 	u32 rsmux_offset;
83 	struct regmap *devctrl_regs;
84 	struct device *dev = &pdev->dev;
85 	struct device_node *np = dev->of_node;
86 
87 	if (!np)
88 		return -ENODEV;
89 
90 	/* get regmaps */
91 	pllctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pll");
92 	if (IS_ERR(pllctrl_regs))
93 		return PTR_ERR(pllctrl_regs);
94 
95 	devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-dev");
96 	if (IS_ERR(devctrl_regs))
97 		return PTR_ERR(devctrl_regs);
98 
99 	ret = of_property_read_u32_index(np, "ti,syscon-pll", 1, &rspll_offset);
100 	if (ret) {
101 		dev_err(dev, "couldn't read the reset pll offset!\n");
102 		return -EINVAL;
103 	}
104 
105 	ret = of_property_read_u32_index(np, "ti,syscon-dev", 1, &rsmux_offset);
106 	if (ret) {
107 		dev_err(dev, "couldn't read the rsmux offset!\n");
108 		return -EINVAL;
109 	}
110 
111 	/* set soft/hard reset */
112 	val = of_property_read_bool(np, "ti,soft-reset");
113 	val = val ? RSCFG_RSTYPE_SOFT : RSCFG_RSTYPE_HARD;
114 
115 	ret = rsctrl_enable_rspll_write();
116 	if (ret)
117 		return ret;
118 
119 	ret = regmap_write(pllctrl_regs, rspll_offset + RSCFG_RG, val);
120 	if (ret)
121 		return ret;
122 
123 	/* disable a reset isolation for all module clocks */
124 	ret = regmap_write(pllctrl_regs, rspll_offset + RSISO_RG, 0);
125 	if (ret)
126 		return ret;
127 
128 	/* enable a reset for watchdogs from wdt-list */
129 	for (i = 0; i < WDT_MUX_NUMBER; i++) {
130 		ret = of_property_read_u32_index(np, "ti,wdt-list", i, &val);
131 		if (ret == -EOVERFLOW && !i) {
132 			dev_err(dev, "ti,wdt-list property has to contain at"
133 				"least one entry\n");
134 			return -EINVAL;
135 		} else if (ret) {
136 			break;
137 		}
138 
139 		if (val >= WDT_MUX_NUMBER) {
140 			dev_err(dev, "ti,wdt-list property can contain "
141 				"only numbers < 4\n");
142 			return -EINVAL;
143 		}
144 
145 		rg = rsmux_offset + val * 4;
146 
147 		ret = regmap_update_bits(devctrl_regs, rg, RSMUX_OMODE_MASK,
148 					 RSMUX_OMODE_RESET_ON |
149 					 RSMUX_LOCK_SET);
150 		if (ret)
151 			return ret;
152 	}
153 
154 	ret = register_restart_handler(&rsctrl_restart_nb);
155 	if (ret)
156 		dev_err(dev, "cannot register restart handler (err=%d)\n", ret);
157 
158 	return ret;
159 }
160 
161 static struct platform_driver rsctrl_driver = {
162 	.probe = rsctrl_probe,
163 	.driver = {
164 		.name = KBUILD_MODNAME,
165 		.of_match_table = rsctrl_of_match,
166 	},
167 };
168 module_platform_driver(rsctrl_driver);
169 
170 MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>");
171 MODULE_DESCRIPTION("Texas Instruments keystone reset driver");
172 MODULE_ALIAS("platform:" KBUILD_MODNAME);
173