1# SPDX-License-Identifier: GPL-2.0-only 2menuconfig POWER_RESET 3 bool "Board level reset or power off" 4 help 5 Provides a number of drivers which either reset a complete board 6 or shut it down, by manipulating the main power supply on the board. 7 8 Say Y here to enable board reset and power off 9 10if POWER_RESET 11 12config POWER_RESET_AS3722 13 bool "ams AS3722 power-off driver" 14 depends on MFD_AS3722 15 help 16 This driver supports turning off board via a ams AS3722 power-off. 17 18config POWER_RESET_AT91_POWEROFF 19 tristate "Atmel AT91 poweroff driver" 20 depends on ARCH_AT91 21 default SOC_AT91SAM9 || SOC_SAMA5 22 help 23 This driver supports poweroff for Atmel AT91SAM9 and SAMA5 24 SoCs 25 26config POWER_RESET_AT91_RESET 27 tristate "Atmel AT91 reset driver" 28 depends on ARCH_AT91 29 default SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5 30 help 31 This driver supports restart for Atmel AT91SAM9 and SAMA5 32 SoCs 33 34config POWER_RESET_AT91_SAMA5D2_SHDWC 35 tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver" 36 depends on ARCH_AT91 37 default SOC_SAM9X60 || SOC_SAMA5 38 help 39 This driver supports the alternate shutdown controller for some Atmel 40 SAMA5 SoCs. It is present for example on SAMA5D2 SoC. 41 42config POWER_RESET_ATC260X 43 tristate "Actions Semi ATC260x PMIC power-off driver" 44 depends on MFD_ATC260X 45 help 46 This driver provides power-off and restart support for a system 47 through Actions Semi ATC260x series PMICs. 48 49config POWER_RESET_AXXIA 50 bool "LSI Axxia reset driver" 51 depends on ARCH_AXXIA 52 help 53 This driver supports restart for Axxia SoC. 54 55 Say Y if you have an Axxia family SoC. 56 57config POWER_RESET_BRCMKONA 58 bool "Broadcom Kona reset driver" 59 depends on ARM || COMPILE_TEST 60 default ARCH_BCM_MOBILE 61 help 62 This driver provides restart support for Broadcom Kona chips. 63 64 Say Y here if you have a Broadcom Kona-based board and you wish 65 to have restart support. 66 67config POWER_RESET_BRCMSTB 68 bool "Broadcom STB reset driver" 69 depends on ARM || ARM64 || MIPS || COMPILE_TEST 70 depends on MFD_SYSCON 71 default ARCH_BRCMSTB || BMIPS_GENERIC 72 help 73 This driver provides restart support for Broadcom STB boards. 74 75 Say Y here if you have a Broadcom STB board and you wish 76 to have restart support. 77 78config POWER_RESET_GEMINI_POWEROFF 79 bool "Cortina Gemini power-off driver" 80 depends on ARCH_GEMINI || COMPILE_TEST 81 depends on OF && HAS_IOMEM 82 default ARCH_GEMINI 83 help 84 This driver supports turning off the Cortina Gemini SoC. 85 Select this if you're building a kernel with Gemini SoC support. 86 87config POWER_RESET_GPIO 88 bool "GPIO power-off driver" 89 depends on OF_GPIO 90 help 91 This driver supports turning off your board via a GPIO line. 92 If your board needs a GPIO high/low to power down, say Y and 93 create a binding in your devicetree. 94 95config POWER_RESET_GPIO_RESTART 96 bool "GPIO restart driver" 97 depends on OF_GPIO 98 help 99 This driver supports restarting your board via a GPIO line. 100 If your board needs a GPIO high/low to restart, say Y and 101 create a binding in your devicetree. 102 103config POWER_RESET_HISI 104 bool "Hisilicon power-off driver" 105 depends on ARCH_HISI 106 help 107 Reboot support for Hisilicon boards. 108 109config POWER_RESET_LINKSTATION 110 tristate "Buffalo LinkStation power-off driver" 111 depends on ARCH_MVEBU || COMPILE_TEST 112 depends on OF_MDIO && PHYLIB 113 help 114 This driver supports turning off some Buffalo LinkStations by 115 setting an output pin at the ethernet PHY to the correct state. 116 It also makes the device compatible with the WoL function. 117 118 Say Y here if you have a Buffalo LinkStation LS421D/E. 119 120config POWER_RESET_MSM 121 bool "Qualcomm MSM power-off driver" 122 depends on ARCH_QCOM 123 help 124 Power off and restart support for Qualcomm boards. 125 126config POWER_RESET_QCOM_PON 127 tristate "Qualcomm power-on driver" 128 depends on ARCH_QCOM 129 depends on MFD_SPMI_PMIC 130 select REBOOT_MODE 131 help 132 Power On support for Qualcomm boards. 133 If you have a Qualcomm platform and need support for 134 power-on and reboot reason, Say Y. 135 If unsure, Say N. 136 137config POWER_RESET_OCELOT_RESET 138 bool "Microsemi Ocelot reset driver" 139 depends on MSCC_OCELOT || ARCH_SPARX5 || COMPILE_TEST 140 select MFD_SYSCON 141 help 142 This driver supports restart for Microsemi Ocelot SoC and similar. 143 144config POWER_RESET_OXNAS 145 bool "OXNAS SoC restart driver" 146 depends on ARCH_OXNAS 147 default MACH_OX820 148 help 149 Restart support for OXNAS/PLXTECH OX820 SoC. 150 151config POWER_RESET_PIIX4_POWEROFF 152 tristate "Intel PIIX4 power-off driver" 153 depends on PCI 154 depends on MIPS || COMPILE_TEST 155 help 156 This driver supports powering off a system using the Intel PIIX4 157 southbridge, for example the MIPS Malta development board. The 158 southbridge SOff state is entered in response to a request to 159 power off the system. 160 161config POWER_RESET_LTC2952 162 bool "LTC2952 PowerPath power-off driver" 163 depends on OF_GPIO 164 help 165 This driver supports an external powerdown trigger and board power 166 down via the LTC2952. Bindings are made in the device tree. 167 168config POWER_RESET_MT6323 169 bool "MediaTek MT6323 power-off driver" 170 depends on MFD_MT6397 171 help 172 The power-off driver is responsible for externally shutdown down 173 the power of a remote MediaTek SoC MT6323 is connected to through 174 controlling a tiny circuit BBPU inside MT6323 RTC. 175 176 Say Y if you have a board where MT6323 could be found. 177 178config POWER_RESET_QNAP 179 bool "QNAP power-off driver" 180 depends on OF_GPIO && PLAT_ORION 181 help 182 This driver supports turning off QNAP NAS devices by sending 183 commands to the microcontroller which controls the main power. 184 185 Say Y if you have a QNAP NAS. 186 187config POWER_RESET_REGULATOR 188 bool "Regulator subsystem power-off driver" 189 depends on OF && REGULATOR 190 help 191 This driver supports turning off your board by disabling a 192 power regulator defined in the devicetree. 193 194config POWER_RESET_RESTART 195 bool "Restart power-off driver" 196 help 197 Some boards don't actually have the ability to power off. 198 Instead they restart, and u-boot holds the SoC until the 199 user presses a key. u-boot then boots into Linux. 200 201config POWER_RESET_ST 202 bool "ST restart driver" 203 depends on ARCH_STI 204 help 205 Reset support for STMicroelectronics boards. 206 207config POWER_RESET_VERSATILE 208 bool "ARM Versatile family reboot driver" 209 depends on ARM 210 depends on MFD_SYSCON 211 depends on OF 212 help 213 Power off and restart support for ARM Versatile family of 214 reference boards. 215 216config POWER_RESET_VEXPRESS 217 bool "ARM Versatile Express power-off and reset driver" 218 depends on ARM || ARM64 219 depends on VEXPRESS_CONFIG=y 220 help 221 Power off and reset support for the ARM Ltd. Versatile 222 Express boards. 223 224config POWER_RESET_XGENE 225 bool "APM SoC X-Gene reset driver" 226 depends on ARM64 227 help 228 Reboot support for the APM SoC X-Gene Eval boards. 229 230config POWER_RESET_KEYSTONE 231 bool "Keystone reset driver" 232 depends on ARCH_KEYSTONE || COMPILE_TEST 233 depends on HAS_IOMEM 234 select MFD_SYSCON 235 help 236 Reboot support for the KEYSTONE SoCs. 237 238config POWER_RESET_SYSCON 239 bool "Generic SYSCON regmap reset driver" 240 depends on OF 241 depends on HAS_IOMEM 242 select MFD_SYSCON 243 help 244 Reboot support for generic SYSCON mapped register reset. 245 246config POWER_RESET_SYSCON_POWEROFF 247 bool "Generic SYSCON regmap poweroff driver" 248 depends on OF 249 depends on HAS_IOMEM 250 select MFD_SYSCON 251 help 252 Poweroff support for generic SYSCON mapped register poweroff. 253 254config POWER_RESET_RMOBILE 255 tristate "Renesas R-Mobile reset driver" 256 depends on ARCH_RMOBILE || COMPILE_TEST 257 depends on HAS_IOMEM 258 help 259 Reboot support for Renesas R-Mobile and SH-Mobile SoCs. 260 261config REBOOT_MODE 262 tristate 263 264config SYSCON_REBOOT_MODE 265 tristate "Generic SYSCON regmap reboot mode driver" 266 depends on OF 267 depends on MFD_SYSCON 268 select REBOOT_MODE 269 help 270 Say y here will enable reboot mode driver. This will 271 get reboot mode arguments and store it in SYSCON mapped 272 register, then the bootloader can read it to take different 273 action according to the mode. 274 275config POWER_RESET_SC27XX 276 tristate "Spreadtrum SC27xx PMIC power-off driver" 277 depends on MFD_SC27XX_PMIC || COMPILE_TEST 278 help 279 This driver supports powering off a system through 280 Spreadtrum SC27xx series PMICs. The SC27xx series 281 PMICs includes the SC2720, SC2721, SC2723, SC2730 282 and SC2731 chips. 283 284config NVMEM_REBOOT_MODE 285 tristate "Generic NVMEM reboot mode driver" 286 depends on OF 287 select REBOOT_MODE 288 help 289 Say y here will enable reboot mode driver. This will 290 get reboot mode arguments and store it in a NVMEM cell, 291 then the bootloader can read it and take different 292 action according to the mode. 293 294endif 295