1menuconfig POWER_SUPPLY 2 tristate "Power supply class support" 3 help 4 Say Y here to enable power supply class support. This allows 5 power supply (batteries, AC, USB) monitoring by userspace 6 via sysfs and uevent (if available) and/or APM kernel interface 7 (if selected below). 8 9if POWER_SUPPLY 10 11config POWER_SUPPLY_DEBUG 12 bool "Power supply debug" 13 help 14 Say Y here to enable debugging messages for power supply class 15 and drivers. 16 17config PDA_POWER 18 tristate "Generic PDA/phone power driver" 19 depends on !S390 20 help 21 Say Y here to enable generic power driver for PDAs and phones with 22 one or two external power supplies (AC/USB) connected to main and 23 backup batteries, and optional builtin charger. 24 25config APM_POWER 26 tristate "APM emulation for class batteries" 27 depends on APM_EMULATION 28 help 29 Say Y here to enable support APM status emulation using 30 battery class devices. 31 32config MAX8925_POWER 33 tristate "MAX8925 battery charger support" 34 depends on MFD_MAX8925 35 help 36 Say Y here to enable support for the battery charger in the Maxim 37 MAX8925 PMIC. 38 39config WM831X_BACKUP 40 tristate "WM831X backup battery charger support" 41 depends on MFD_WM831X 42 help 43 Say Y here to enable support for the backup battery charger 44 in the Wolfson Microelectronics WM831x PMICs. 45 46config WM831X_POWER 47 tristate "WM831X PMU support" 48 depends on MFD_WM831X 49 help 50 Say Y here to enable support for the power management unit 51 provided by Wolfson Microelectronics WM831x PMICs. 52 53config WM8350_POWER 54 tristate "WM8350 PMU support" 55 depends on MFD_WM8350 56 help 57 Say Y here to enable support for the power management unit 58 provided by the Wolfson Microelectronics WM8350 PMIC. 59 60config TEST_POWER 61 tristate "Test power driver" 62 help 63 This driver is used for testing. It's safe to say M here. 64 65config BATTERY_DS2760 66 tristate "DS2760 battery driver (HP iPAQ & others)" 67 depends on W1 && W1_SLAVE_DS2760 68 help 69 Say Y here to enable support for batteries with ds2760 chip. 70 71config BATTERY_DS2780 72 tristate "DS2780 battery driver" 73 depends on HAS_IOMEM 74 select W1 75 select W1_SLAVE_DS2780 76 help 77 Say Y here to enable support for batteries with ds2780 chip. 78 79config BATTERY_DS2782 80 tristate "DS2782/DS2786 standalone gas-gauge" 81 depends on I2C 82 help 83 Say Y here to enable support for the DS2782/DS2786 standalone battery 84 gas-gauge. 85 86config BATTERY_PMU 87 tristate "Apple PMU battery" 88 depends on PPC32 && ADB_PMU 89 help 90 Say Y here to expose battery information on Apple machines 91 through the generic battery class. 92 93config BATTERY_OLPC 94 tristate "One Laptop Per Child battery" 95 depends on X86_32 && OLPC 96 help 97 Say Y to enable support for the battery on the OLPC laptop. 98 99config BATTERY_TOSA 100 tristate "Sharp SL-6000 (tosa) battery" 101 depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX 102 help 103 Say Y to enable support for the battery on the Sharp Zaurus 104 SL-6000 (tosa) models. 105 106config BATTERY_COLLIE 107 tristate "Sharp SL-5500 (collie) battery" 108 depends on SA1100_COLLIE && MCP_UCB1200 109 help 110 Say Y to enable support for the battery on the Sharp Zaurus 111 SL-5500 (collie) models. 112 113config BATTERY_WM97XX 114 bool "WM97xx generic battery driver" 115 depends on TOUCHSCREEN_WM97XX=y 116 help 117 Say Y to enable support for battery measured by WM97xx aux port. 118 119config BATTERY_SBS 120 tristate "SBS Compliant gas gauge" 121 depends on I2C 122 help 123 Say Y to include support for SBS battery driver for SBS-compliant 124 gas gauges. 125 126config BATTERY_BQ27x00 127 tristate "BQ27x00 battery driver" 128 help 129 Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips. 130 131config BATTERY_BQ27X00_I2C 132 bool "BQ27200/BQ27500 support" 133 depends on BATTERY_BQ27x00 134 depends on I2C 135 default y 136 help 137 Say Y here to enable support for batteries with BQ27x00 (I2C) chips. 138 139config BATTERY_BQ27X00_PLATFORM 140 bool "BQ27000 support" 141 depends on BATTERY_BQ27x00 142 default y 143 help 144 Say Y here to enable support for batteries with BQ27000 (HDQ) chips. 145 146config BATTERY_DA9030 147 tristate "DA9030 battery driver" 148 depends on PMIC_DA903X 149 help 150 Say Y here to enable support for batteries charger integrated into 151 DA9030 PMIC. 152 153config BATTERY_DA9052 154 tristate "Dialog DA9052 Battery" 155 depends on PMIC_DA9052 156 depends on BROKEN 157 help 158 Say Y here to enable support for batteries charger integrated into 159 DA9052 PMIC. 160 161config BATTERY_MAX17040 162 tristate "Maxim MAX17040 Fuel Gauge" 163 depends on I2C 164 help 165 MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries 166 in handheld and portable equipment. The MAX17040 is configured 167 to operate with a single lithium cell 168 169config BATTERY_MAX17042 170 tristate "Maxim MAX17042/8997/8966 Fuel Gauge" 171 depends on I2C 172 help 173 MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries 174 in handheld and portable equipment. The MAX17042 is configured 175 to operate with a single lithium cell. MAX8997 and MAX8966 are 176 multi-function devices that include fuel gauages that are compatible 177 with MAX17042. 178 179config BATTERY_Z2 180 tristate "Z2 battery driver" 181 depends on I2C && MACH_ZIPIT2 182 help 183 Say Y to include support for the battery on the Zipit Z2. 184 185config BATTERY_S3C_ADC 186 tristate "Battery driver for Samsung ADC based monitoring" 187 depends on S3C_ADC 188 help 189 Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery 190 191config CHARGER_PCF50633 192 tristate "NXP PCF50633 MBC" 193 depends on MFD_PCF50633 194 help 195 Say Y to include support for NXP PCF50633 Main Battery Charger. 196 197config BATTERY_JZ4740 198 tristate "Ingenic JZ4740 battery" 199 depends on MACH_JZ4740 200 depends on MFD_JZ4740_ADC 201 help 202 Say Y to enable support for the battery on Ingenic JZ4740 based 203 boards. 204 205 This driver can be build as a module. If so, the module will be 206 called jz4740-battery. 207 208config BATTERY_INTEL_MID 209 tristate "Battery driver for Intel MID platforms" 210 depends on INTEL_SCU_IPC && SPI 211 help 212 Say Y here to enable the battery driver on Intel MID 213 platforms. 214 215config CHARGER_ISP1704 216 tristate "ISP1704 USB Charger Detection" 217 depends on USB_OTG_UTILS 218 help 219 Say Y to enable support for USB Charger Detection with 220 ISP1707/ISP1704 USB transceivers. 221 222config CHARGER_MAX8903 223 tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power" 224 depends on GENERIC_HARDIRQS 225 help 226 Say Y to enable support for the MAX8903 DC-DC charger and sysfs. 227 The driver supports controlling charger-enable and current-limit 228 pins based on the status of charger connections with interrupt 229 handlers. 230 231config CHARGER_TWL4030 232 tristate "OMAP TWL4030 BCI charger driver" 233 depends on TWL4030_CORE 234 help 235 Say Y here to enable support for TWL4030 Battery Charge Interface. 236 237config CHARGER_LP8727 238 tristate "National Semiconductor LP8727 charger driver" 239 depends on I2C 240 help 241 Say Y here to enable support for LP8727 Charger Driver. 242 243config CHARGER_GPIO 244 tristate "GPIO charger" 245 depends on GPIOLIB 246 help 247 Say Y to include support for chargers which report their online status 248 through a GPIO pin. 249 250 This driver can be build as a module. If so, the module will be 251 called gpio-charger. 252 253config CHARGER_MANAGER 254 bool "Battery charger manager for multiple chargers" 255 depends on REGULATOR && RTC_CLASS 256 help 257 Say Y to enable charger-manager support, which allows multiple 258 chargers attached to a battery and multiple batteries attached to a 259 system. The charger-manager also can monitor charging status in 260 runtime and in suspend-to-RAM by waking up the system periodically 261 with help of suspend_again support. 262 263config CHARGER_MAX8997 264 tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver" 265 depends on MFD_MAX8997 && REGULATOR_MAX8997 266 help 267 Say Y to enable support for the battery charger control sysfs and 268 platform data of MAX8997/LP3974 PMICs. 269 270config CHARGER_MAX8998 271 tristate "Maxim MAX8998/LP3974 PMIC battery charger driver" 272 depends on MFD_MAX8998 && REGULATOR_MAX8998 273 help 274 Say Y to enable support for the battery charger control sysfs and 275 platform data of MAX8998/LP3974 PMICs. 276 277endif # POWER_SUPPLY 278