1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Power domain driver for Broadcom BCM2835
4 *
5 * Copyright (C) 2018 Broadcom
6 */
7
8 #include <dt-bindings/soc/bcm2835-pm.h>
9 #include <linux/clk.h>
10 #include <linux/delay.h>
11 #include <linux/io.h>
12 #include <linux/mfd/bcm2835-pm.h>
13 #include <linux/module.h>
14 #include <linux/platform_device.h>
15 #include <linux/pm_domain.h>
16 #include <linux/reset-controller.h>
17 #include <linux/types.h>
18
19 #define PM_GNRIC 0x00
20 #define PM_AUDIO 0x04
21 #define PM_STATUS 0x18
22 #define PM_RSTC 0x1c
23 #define PM_RSTS 0x20
24 #define PM_WDOG 0x24
25 #define PM_PADS0 0x28
26 #define PM_PADS2 0x2c
27 #define PM_PADS3 0x30
28 #define PM_PADS4 0x34
29 #define PM_PADS5 0x38
30 #define PM_PADS6 0x3c
31 #define PM_CAM0 0x44
32 #define PM_CAM0_LDOHPEN BIT(2)
33 #define PM_CAM0_LDOLPEN BIT(1)
34 #define PM_CAM0_CTRLEN BIT(0)
35
36 #define PM_CAM1 0x48
37 #define PM_CAM1_LDOHPEN BIT(2)
38 #define PM_CAM1_LDOLPEN BIT(1)
39 #define PM_CAM1_CTRLEN BIT(0)
40
41 #define PM_CCP2TX 0x4c
42 #define PM_CCP2TX_LDOEN BIT(1)
43 #define PM_CCP2TX_CTRLEN BIT(0)
44
45 #define PM_DSI0 0x50
46 #define PM_DSI0_LDOHPEN BIT(2)
47 #define PM_DSI0_LDOLPEN BIT(1)
48 #define PM_DSI0_CTRLEN BIT(0)
49
50 #define PM_DSI1 0x54
51 #define PM_DSI1_LDOHPEN BIT(2)
52 #define PM_DSI1_LDOLPEN BIT(1)
53 #define PM_DSI1_CTRLEN BIT(0)
54
55 #define PM_HDMI 0x58
56 #define PM_HDMI_RSTDR BIT(19)
57 #define PM_HDMI_LDOPD BIT(1)
58 #define PM_HDMI_CTRLEN BIT(0)
59
60 #define PM_USB 0x5c
61 /* The power gates must be enabled with this bit before enabling the LDO in the
62 * USB block.
63 */
64 #define PM_USB_CTRLEN BIT(0)
65
66 #define PM_PXLDO 0x60
67 #define PM_PXBG 0x64
68 #define PM_DFT 0x68
69 #define PM_SMPS 0x6c
70 #define PM_XOSC 0x70
71 #define PM_SPAREW 0x74
72 #define PM_SPARER 0x78
73 #define PM_AVS_RSTDR 0x7c
74 #define PM_AVS_STAT 0x80
75 #define PM_AVS_EVENT 0x84
76 #define PM_AVS_INTEN 0x88
77 #define PM_DUMMY 0xfc
78
79 #define PM_IMAGE 0x108
80 #define PM_GRAFX 0x10c
81 #define PM_PROC 0x110
82 #define PM_ENAB BIT(12)
83 #define PM_ISPRSTN BIT(8)
84 #define PM_H264RSTN BIT(7)
85 #define PM_PERIRSTN BIT(6)
86 #define PM_V3DRSTN BIT(6)
87 #define PM_ISFUNC BIT(5)
88 #define PM_MRDONE BIT(4)
89 #define PM_MEMREP BIT(3)
90 #define PM_ISPOW BIT(2)
91 #define PM_POWOK BIT(1)
92 #define PM_POWUP BIT(0)
93 #define PM_INRUSH_SHIFT 13
94 #define PM_INRUSH_3_5_MA 0
95 #define PM_INRUSH_5_MA 1
96 #define PM_INRUSH_10_MA 2
97 #define PM_INRUSH_20_MA 3
98 #define PM_INRUSH_MASK (3 << PM_INRUSH_SHIFT)
99
100 #define PM_PASSWORD 0x5a000000
101
102 #define PM_WDOG_TIME_SET 0x000fffff
103 #define PM_RSTC_WRCFG_CLR 0xffffffcf
104 #define PM_RSTS_HADWRH_SET 0x00000040
105 #define PM_RSTC_WRCFG_SET 0x00000030
106 #define PM_RSTC_WRCFG_FULL_RESET 0x00000020
107 #define PM_RSTC_RESET 0x00000102
108
109 #define PM_READ(reg) readl(power->base + (reg))
110 #define PM_WRITE(reg, val) writel(PM_PASSWORD | (val), power->base + (reg))
111
112 #define ASB_BRDG_VERSION 0x00
113 #define ASB_CPR_CTRL 0x04
114
115 #define ASB_V3D_S_CTRL 0x08
116 #define ASB_V3D_M_CTRL 0x0c
117 #define ASB_ISP_S_CTRL 0x10
118 #define ASB_ISP_M_CTRL 0x14
119 #define ASB_H264_S_CTRL 0x18
120 #define ASB_H264_M_CTRL 0x1c
121
122 #define ASB_REQ_STOP BIT(0)
123 #define ASB_ACK BIT(1)
124 #define ASB_EMPTY BIT(2)
125 #define ASB_FULL BIT(3)
126
127 #define ASB_AXI_BRDG_ID 0x20
128
129 #define BCM2835_BRDG_ID 0x62726467
130
131 struct bcm2835_power_domain {
132 struct generic_pm_domain base;
133 struct bcm2835_power *power;
134 u32 domain;
135 struct clk *clk;
136 };
137
138 struct bcm2835_power {
139 struct device *dev;
140 /* PM registers. */
141 void __iomem *base;
142 /* AXI Async bridge registers. */
143 void __iomem *asb;
144 /* RPiVid bridge registers. */
145 void __iomem *rpivid_asb;
146
147 struct genpd_onecell_data pd_xlate;
148 struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT];
149 struct reset_controller_dev reset;
150 };
151
bcm2835_asb_control(struct bcm2835_power * power,u32 reg,bool enable)152 static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable)
153 {
154 void __iomem *base = power->asb;
155 u64 start;
156 u32 val;
157
158 switch (reg) {
159 case 0:
160 return 0;
161 case ASB_V3D_S_CTRL:
162 case ASB_V3D_M_CTRL:
163 if (power->rpivid_asb)
164 base = power->rpivid_asb;
165 break;
166 }
167
168 start = ktime_get_ns();
169
170 /* Enable the module's async AXI bridges. */
171 if (enable) {
172 val = readl(base + reg) & ~ASB_REQ_STOP;
173 } else {
174 val = readl(base + reg) | ASB_REQ_STOP;
175 }
176 writel(PM_PASSWORD | val, base + reg);
177
178 while (!!(readl(base + reg) & ASB_ACK) == enable) {
179 cpu_relax();
180 if (ktime_get_ns() - start >= 1000)
181 return -ETIMEDOUT;
182 }
183
184 return 0;
185 }
186
bcm2835_asb_enable(struct bcm2835_power * power,u32 reg)187 static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
188 {
189 return bcm2835_asb_control(power, reg, true);
190 }
191
bcm2835_asb_disable(struct bcm2835_power * power,u32 reg)192 static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
193 {
194 return bcm2835_asb_control(power, reg, false);
195 }
196
bcm2835_power_power_off(struct bcm2835_power_domain * pd,u32 pm_reg)197 static int bcm2835_power_power_off(struct bcm2835_power_domain *pd, u32 pm_reg)
198 {
199 struct bcm2835_power *power = pd->power;
200
201 /* We don't run this on BCM2711 */
202 if (power->rpivid_asb)
203 return 0;
204
205 /* Enable functional isolation */
206 PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISFUNC);
207
208 /* Enable electrical isolation */
209 PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISPOW);
210
211 /* Open the power switches. */
212 PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_POWUP);
213
214 return 0;
215 }
216
bcm2835_power_power_on(struct bcm2835_power_domain * pd,u32 pm_reg)217 static int bcm2835_power_power_on(struct bcm2835_power_domain *pd, u32 pm_reg)
218 {
219 struct bcm2835_power *power = pd->power;
220 struct device *dev = power->dev;
221 u64 start;
222 int ret;
223 int inrush;
224 bool powok;
225
226 /* We don't run this on BCM2711 */
227 if (power->rpivid_asb)
228 return 0;
229
230 /* If it was already powered on by the fw, leave it that way. */
231 if (PM_READ(pm_reg) & PM_POWUP)
232 return 0;
233
234 /* Enable power. Allowing too much current at once may result
235 * in POWOK never getting set, so start low and ramp it up as
236 * necessary to succeed.
237 */
238 powok = false;
239 for (inrush = PM_INRUSH_3_5_MA; inrush <= PM_INRUSH_20_MA; inrush++) {
240 PM_WRITE(pm_reg,
241 (PM_READ(pm_reg) & ~PM_INRUSH_MASK) |
242 (inrush << PM_INRUSH_SHIFT) |
243 PM_POWUP);
244
245 start = ktime_get_ns();
246 while (!(powok = !!(PM_READ(pm_reg) & PM_POWOK))) {
247 cpu_relax();
248 if (ktime_get_ns() - start >= 3000)
249 break;
250 }
251 }
252 if (!powok) {
253 dev_err(dev, "Timeout waiting for %s power OK\n",
254 pd->base.name);
255 ret = -ETIMEDOUT;
256 goto err_disable_powup;
257 }
258
259 /* Disable electrical isolation */
260 PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_ISPOW);
261
262 /* Repair memory */
263 PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_MEMREP);
264 start = ktime_get_ns();
265 while (!(PM_READ(pm_reg) & PM_MRDONE)) {
266 cpu_relax();
267 if (ktime_get_ns() - start >= 1000) {
268 dev_err(dev, "Timeout waiting for %s memory repair\n",
269 pd->base.name);
270 ret = -ETIMEDOUT;
271 goto err_disable_ispow;
272 }
273 }
274
275 /* Disable functional isolation */
276 PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_ISFUNC);
277
278 return 0;
279
280 err_disable_ispow:
281 PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISPOW);
282 err_disable_powup:
283 PM_WRITE(pm_reg, PM_READ(pm_reg) & ~(PM_POWUP | PM_INRUSH_MASK));
284 return ret;
285 }
286
bcm2835_asb_power_on(struct bcm2835_power_domain * pd,u32 pm_reg,u32 asb_m_reg,u32 asb_s_reg,u32 reset_flags)287 static int bcm2835_asb_power_on(struct bcm2835_power_domain *pd,
288 u32 pm_reg,
289 u32 asb_m_reg,
290 u32 asb_s_reg,
291 u32 reset_flags)
292 {
293 struct bcm2835_power *power = pd->power;
294 int ret;
295
296 ret = clk_prepare_enable(pd->clk);
297 if (ret) {
298 dev_err(power->dev, "Failed to enable clock for %s\n",
299 pd->base.name);
300 return ret;
301 }
302
303 /* Wait 32 clocks for reset to propagate, 1 us will be enough */
304 udelay(1);
305
306 clk_disable_unprepare(pd->clk);
307
308 /* Deassert the resets. */
309 PM_WRITE(pm_reg, PM_READ(pm_reg) | reset_flags);
310
311 ret = clk_prepare_enable(pd->clk);
312 if (ret) {
313 dev_err(power->dev, "Failed to enable clock for %s\n",
314 pd->base.name);
315 goto err_enable_resets;
316 }
317
318 ret = bcm2835_asb_enable(power, asb_m_reg);
319 if (ret) {
320 dev_err(power->dev, "Failed to enable ASB master for %s\n",
321 pd->base.name);
322 goto err_disable_clk;
323 }
324 ret = bcm2835_asb_enable(power, asb_s_reg);
325 if (ret) {
326 dev_err(power->dev, "Failed to enable ASB slave for %s\n",
327 pd->base.name);
328 goto err_disable_asb_master;
329 }
330
331 return 0;
332
333 err_disable_asb_master:
334 bcm2835_asb_disable(power, asb_m_reg);
335 err_disable_clk:
336 clk_disable_unprepare(pd->clk);
337 err_enable_resets:
338 PM_WRITE(pm_reg, PM_READ(pm_reg) & ~reset_flags);
339 return ret;
340 }
341
bcm2835_asb_power_off(struct bcm2835_power_domain * pd,u32 pm_reg,u32 asb_m_reg,u32 asb_s_reg,u32 reset_flags)342 static int bcm2835_asb_power_off(struct bcm2835_power_domain *pd,
343 u32 pm_reg,
344 u32 asb_m_reg,
345 u32 asb_s_reg,
346 u32 reset_flags)
347 {
348 struct bcm2835_power *power = pd->power;
349 int ret;
350
351 ret = bcm2835_asb_disable(power, asb_s_reg);
352 if (ret) {
353 dev_warn(power->dev, "Failed to disable ASB slave for %s\n",
354 pd->base.name);
355 return ret;
356 }
357 ret = bcm2835_asb_disable(power, asb_m_reg);
358 if (ret) {
359 dev_warn(power->dev, "Failed to disable ASB master for %s\n",
360 pd->base.name);
361 bcm2835_asb_enable(power, asb_s_reg);
362 return ret;
363 }
364
365 clk_disable_unprepare(pd->clk);
366
367 /* Assert the resets. */
368 PM_WRITE(pm_reg, PM_READ(pm_reg) & ~reset_flags);
369
370 return 0;
371 }
372
bcm2835_power_pd_power_on(struct generic_pm_domain * domain)373 static int bcm2835_power_pd_power_on(struct generic_pm_domain *domain)
374 {
375 struct bcm2835_power_domain *pd =
376 container_of(domain, struct bcm2835_power_domain, base);
377 struct bcm2835_power *power = pd->power;
378
379 switch (pd->domain) {
380 case BCM2835_POWER_DOMAIN_GRAFX:
381 return bcm2835_power_power_on(pd, PM_GRAFX);
382
383 case BCM2835_POWER_DOMAIN_GRAFX_V3D:
384 return bcm2835_asb_power_on(pd, PM_GRAFX,
385 ASB_V3D_M_CTRL, ASB_V3D_S_CTRL,
386 PM_V3DRSTN);
387
388 case BCM2835_POWER_DOMAIN_IMAGE:
389 return bcm2835_power_power_on(pd, PM_IMAGE);
390
391 case BCM2835_POWER_DOMAIN_IMAGE_PERI:
392 return bcm2835_asb_power_on(pd, PM_IMAGE,
393 0, 0,
394 PM_PERIRSTN);
395
396 case BCM2835_POWER_DOMAIN_IMAGE_ISP:
397 return bcm2835_asb_power_on(pd, PM_IMAGE,
398 ASB_ISP_M_CTRL, ASB_ISP_S_CTRL,
399 PM_ISPRSTN);
400
401 case BCM2835_POWER_DOMAIN_IMAGE_H264:
402 return bcm2835_asb_power_on(pd, PM_IMAGE,
403 ASB_H264_M_CTRL, ASB_H264_S_CTRL,
404 PM_H264RSTN);
405
406 case BCM2835_POWER_DOMAIN_USB:
407 PM_WRITE(PM_USB, PM_USB_CTRLEN);
408 return 0;
409
410 case BCM2835_POWER_DOMAIN_DSI0:
411 PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN);
412 PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN | PM_DSI0_LDOHPEN);
413 return 0;
414
415 case BCM2835_POWER_DOMAIN_DSI1:
416 PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN);
417 PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN | PM_DSI1_LDOHPEN);
418 return 0;
419
420 case BCM2835_POWER_DOMAIN_CCP2TX:
421 PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN);
422 PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN | PM_CCP2TX_LDOEN);
423 return 0;
424
425 case BCM2835_POWER_DOMAIN_HDMI:
426 PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_RSTDR);
427 PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_CTRLEN);
428 PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_LDOPD);
429 usleep_range(100, 200);
430 PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_RSTDR);
431 return 0;
432
433 default:
434 dev_err(power->dev, "Invalid domain %d\n", pd->domain);
435 return -EINVAL;
436 }
437 }
438
bcm2835_power_pd_power_off(struct generic_pm_domain * domain)439 static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain)
440 {
441 struct bcm2835_power_domain *pd =
442 container_of(domain, struct bcm2835_power_domain, base);
443 struct bcm2835_power *power = pd->power;
444
445 switch (pd->domain) {
446 case BCM2835_POWER_DOMAIN_GRAFX:
447 return bcm2835_power_power_off(pd, PM_GRAFX);
448
449 case BCM2835_POWER_DOMAIN_GRAFX_V3D:
450 return bcm2835_asb_power_off(pd, PM_GRAFX,
451 ASB_V3D_M_CTRL, ASB_V3D_S_CTRL,
452 PM_V3DRSTN);
453
454 case BCM2835_POWER_DOMAIN_IMAGE:
455 return bcm2835_power_power_off(pd, PM_IMAGE);
456
457 case BCM2835_POWER_DOMAIN_IMAGE_PERI:
458 return bcm2835_asb_power_off(pd, PM_IMAGE,
459 0, 0,
460 PM_PERIRSTN);
461
462 case BCM2835_POWER_DOMAIN_IMAGE_ISP:
463 return bcm2835_asb_power_off(pd, PM_IMAGE,
464 ASB_ISP_M_CTRL, ASB_ISP_S_CTRL,
465 PM_ISPRSTN);
466
467 case BCM2835_POWER_DOMAIN_IMAGE_H264:
468 return bcm2835_asb_power_off(pd, PM_IMAGE,
469 ASB_H264_M_CTRL, ASB_H264_S_CTRL,
470 PM_H264RSTN);
471
472 case BCM2835_POWER_DOMAIN_USB:
473 PM_WRITE(PM_USB, 0);
474 return 0;
475
476 case BCM2835_POWER_DOMAIN_DSI0:
477 PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN);
478 PM_WRITE(PM_DSI0, 0);
479 return 0;
480
481 case BCM2835_POWER_DOMAIN_DSI1:
482 PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN);
483 PM_WRITE(PM_DSI1, 0);
484 return 0;
485
486 case BCM2835_POWER_DOMAIN_CCP2TX:
487 PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN);
488 PM_WRITE(PM_CCP2TX, 0);
489 return 0;
490
491 case BCM2835_POWER_DOMAIN_HDMI:
492 PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_LDOPD);
493 PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_CTRLEN);
494 return 0;
495
496 default:
497 dev_err(power->dev, "Invalid domain %d\n", pd->domain);
498 return -EINVAL;
499 }
500 }
501
502 static int
bcm2835_init_power_domain(struct bcm2835_power * power,int pd_xlate_index,const char * name)503 bcm2835_init_power_domain(struct bcm2835_power *power,
504 int pd_xlate_index, const char *name)
505 {
506 struct device *dev = power->dev;
507 struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index];
508
509 dom->clk = devm_clk_get(dev->parent, name);
510 if (IS_ERR(dom->clk)) {
511 int ret = PTR_ERR(dom->clk);
512
513 if (ret == -EPROBE_DEFER)
514 return ret;
515
516 /* Some domains don't have a clk, so make sure that we
517 * don't deref an error pointer later.
518 */
519 dom->clk = NULL;
520 }
521
522 dom->base.name = name;
523 dom->base.power_on = bcm2835_power_pd_power_on;
524 dom->base.power_off = bcm2835_power_pd_power_off;
525
526 dom->domain = pd_xlate_index;
527 dom->power = power;
528
529 /* XXX: on/off at boot? */
530 pm_genpd_init(&dom->base, NULL, true);
531
532 power->pd_xlate.domains[pd_xlate_index] = &dom->base;
533
534 return 0;
535 }
536
537 /** bcm2835_reset_reset - Resets a block that has a reset line in the
538 * PM block.
539 *
540 * The consumer of the reset controller must have the power domain up
541 * -- there's no reset ability with the power domain down. To reset
542 * the sub-block, we just disable its access to memory through the
543 * ASB, reset, and re-enable.
544 */
bcm2835_reset_reset(struct reset_controller_dev * rcdev,unsigned long id)545 static int bcm2835_reset_reset(struct reset_controller_dev *rcdev,
546 unsigned long id)
547 {
548 struct bcm2835_power *power = container_of(rcdev, struct bcm2835_power,
549 reset);
550 struct bcm2835_power_domain *pd;
551 int ret;
552
553 switch (id) {
554 case BCM2835_RESET_V3D:
555 pd = &power->domains[BCM2835_POWER_DOMAIN_GRAFX_V3D];
556 break;
557 case BCM2835_RESET_H264:
558 pd = &power->domains[BCM2835_POWER_DOMAIN_IMAGE_H264];
559 break;
560 case BCM2835_RESET_ISP:
561 pd = &power->domains[BCM2835_POWER_DOMAIN_IMAGE_ISP];
562 break;
563 default:
564 dev_err(power->dev, "Bad reset id %ld\n", id);
565 return -EINVAL;
566 }
567
568 ret = bcm2835_power_pd_power_off(&pd->base);
569 if (ret)
570 return ret;
571
572 return bcm2835_power_pd_power_on(&pd->base);
573 }
574
bcm2835_reset_status(struct reset_controller_dev * rcdev,unsigned long id)575 static int bcm2835_reset_status(struct reset_controller_dev *rcdev,
576 unsigned long id)
577 {
578 struct bcm2835_power *power = container_of(rcdev, struct bcm2835_power,
579 reset);
580
581 switch (id) {
582 case BCM2835_RESET_V3D:
583 return !PM_READ(PM_GRAFX & PM_V3DRSTN);
584 case BCM2835_RESET_H264:
585 return !PM_READ(PM_IMAGE & PM_H264RSTN);
586 case BCM2835_RESET_ISP:
587 return !PM_READ(PM_IMAGE & PM_ISPRSTN);
588 default:
589 return -EINVAL;
590 }
591 }
592
593 static const struct reset_control_ops bcm2835_reset_ops = {
594 .reset = bcm2835_reset_reset,
595 .status = bcm2835_reset_status,
596 };
597
598 static const char *const power_domain_names[] = {
599 [BCM2835_POWER_DOMAIN_GRAFX] = "grafx",
600 [BCM2835_POWER_DOMAIN_GRAFX_V3D] = "v3d",
601
602 [BCM2835_POWER_DOMAIN_IMAGE] = "image",
603 [BCM2835_POWER_DOMAIN_IMAGE_PERI] = "peri_image",
604 [BCM2835_POWER_DOMAIN_IMAGE_H264] = "h264",
605 [BCM2835_POWER_DOMAIN_IMAGE_ISP] = "isp",
606
607 [BCM2835_POWER_DOMAIN_USB] = "usb",
608 [BCM2835_POWER_DOMAIN_DSI0] = "dsi0",
609 [BCM2835_POWER_DOMAIN_DSI1] = "dsi1",
610 [BCM2835_POWER_DOMAIN_CAM0] = "cam0",
611 [BCM2835_POWER_DOMAIN_CAM1] = "cam1",
612 [BCM2835_POWER_DOMAIN_CCP2TX] = "ccp2tx",
613 [BCM2835_POWER_DOMAIN_HDMI] = "hdmi",
614 };
615
bcm2835_power_probe(struct platform_device * pdev)616 static int bcm2835_power_probe(struct platform_device *pdev)
617 {
618 struct bcm2835_pm *pm = dev_get_drvdata(pdev->dev.parent);
619 struct device *dev = &pdev->dev;
620 struct bcm2835_power *power;
621 static const struct {
622 int parent, child;
623 } domain_deps[] = {
624 { BCM2835_POWER_DOMAIN_GRAFX, BCM2835_POWER_DOMAIN_GRAFX_V3D },
625 { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_PERI },
626 { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_H264 },
627 { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_ISP },
628 { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_USB },
629 { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 },
630 { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 },
631 };
632 int ret = 0, i;
633 u32 id;
634
635 power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL);
636 if (!power)
637 return -ENOMEM;
638 platform_set_drvdata(pdev, power);
639
640 power->dev = dev;
641 power->base = pm->base;
642 power->asb = pm->asb;
643 power->rpivid_asb = pm->rpivid_asb;
644
645 id = readl(power->asb + ASB_AXI_BRDG_ID);
646 if (id != BCM2835_BRDG_ID /* "BRDG" */) {
647 dev_err(dev, "ASB register ID returned 0x%08x\n", id);
648 return -ENODEV;
649 }
650
651 if (power->rpivid_asb) {
652 id = readl(power->rpivid_asb + ASB_AXI_BRDG_ID);
653 if (id != BCM2835_BRDG_ID /* "BRDG" */) {
654 dev_err(dev, "RPiVid ASB register ID returned 0x%08x\n",
655 id);
656 return -ENODEV;
657 }
658 }
659
660 power->pd_xlate.domains = devm_kcalloc(dev,
661 ARRAY_SIZE(power_domain_names),
662 sizeof(*power->pd_xlate.domains),
663 GFP_KERNEL);
664 if (!power->pd_xlate.domains)
665 return -ENOMEM;
666
667 power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names);
668
669 for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) {
670 ret = bcm2835_init_power_domain(power, i, power_domain_names[i]);
671 if (ret)
672 goto fail;
673 }
674
675 for (i = 0; i < ARRAY_SIZE(domain_deps); i++) {
676 pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base,
677 &power->domains[domain_deps[i].child].base);
678 }
679
680 power->reset.owner = THIS_MODULE;
681 power->reset.nr_resets = BCM2835_RESET_COUNT;
682 power->reset.ops = &bcm2835_reset_ops;
683 power->reset.of_node = dev->parent->of_node;
684
685 ret = devm_reset_controller_register(dev, &power->reset);
686 if (ret)
687 goto fail;
688
689 of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate);
690
691 dev_info(dev, "Broadcom BCM2835 power domains driver");
692 return 0;
693
694 fail:
695 for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) {
696 struct generic_pm_domain *dom = &power->domains[i].base;
697
698 if (dom->name)
699 pm_genpd_remove(dom);
700 }
701 return ret;
702 }
703
704 static struct platform_driver bcm2835_power_driver = {
705 .probe = bcm2835_power_probe,
706 .driver = {
707 .name = "bcm2835-power",
708 },
709 };
710 module_platform_driver(bcm2835_power_driver);
711
712 MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
713 MODULE_DESCRIPTION("Driver for Broadcom BCM2835 PM power domains and reset");
714