xref: /linux/drivers/platform/x86/acerhdf.c (revision e6a901a00822659181c93c86d8bbc2a17779fddc)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * acerhdf - A driver which monitors the temperature
4  *           of the aspire one netbook, turns on/off the fan
5  *           as soon as the upper/lower threshold is reached.
6  *
7  * (C) 2009 - Peter Kaestle     peter (a) piie.net
8  *                              https://piie.net
9  *     2009 Borislav Petkov	bp (a) alien8.de
10  *
11  * Inspired by and many thanks to:
12  *  o acerfand   - Rachel Greenham
13  *  o acer_ec.pl - Michael Kurz     michi.kurz (at) googlemail.com
14  *               - Petr Tomasek     tomasek (#) etf,cuni,cz
15  *               - Carlos Corbacho  cathectic (at) gmail.com
16  *  o lkml       - Matthew Garrett
17  *               - Borislav Petkov
18  *               - Andreas Mohr
19  */
20 
21 #define pr_fmt(fmt) "acerhdf: " fmt
22 
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/dmi.h>
26 #include <linux/acpi.h>
27 #include <linux/thermal.h>
28 #include <linux/platform_device.h>
29 
30 /*
31  * The driver is started with "kernel mode off" by default. That means, the BIOS
32  * is still in control of the fan. In this mode the driver allows to read the
33  * temperature of the cpu and a userspace tool may take over control of the fan.
34  * If the driver is switched to "kernel mode" (e.g. via module parameter) the
35  * driver is in full control of the fan. If you want the module to be started in
36  * kernel mode by default, define the following:
37  */
38 #undef START_IN_KERNEL_MODE
39 
40 #define DRV_VER "0.7.0"
41 
42 /*
43  * According to the Atom N270 datasheet,
44  * (http://download.intel.com/design/processor/datashts/320032.pdf) the
45  * CPU's optimal operating limits denoted in junction temperature as
46  * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
47  * assume 89°C is critical temperature.
48  */
49 #define ACERHDF_DEFAULT_TEMP_FANON 60000
50 #define ACERHDF_DEFAULT_TEMP_FANOFF 53000
51 #define ACERHDF_TEMP_CRIT 89000
52 #define ACERHDF_FAN_OFF 0
53 #define ACERHDF_FAN_AUTO 1
54 
55 /*
56  * No matter what value the user puts into the fanon variable, turn on the fan
57  * at 80 degree Celsius to prevent hardware damage
58  */
59 #define ACERHDF_MAX_FANON 80000
60 
61 /*
62  * Maximum interval between two temperature checks is 15 seconds, as the die
63  * can get hot really fast under heavy load (plus we shouldn't forget about
64  * possible impact of _external_ aggressive sources such as heaters, sun etc.)
65  */
66 #define ACERHDF_MAX_INTERVAL 15
67 
68 #ifdef START_IN_KERNEL_MODE
69 static int kernelmode = 1;
70 #else
71 static int kernelmode;
72 #endif
73 
74 static unsigned int interval = 10;
75 static unsigned int fanon = ACERHDF_DEFAULT_TEMP_FANON;
76 static unsigned int fanoff = ACERHDF_DEFAULT_TEMP_FANOFF;
77 static unsigned int verbose;
78 static unsigned int list_supported;
79 static unsigned int fanstate = ACERHDF_FAN_AUTO;
80 static char force_bios[16];
81 static char force_product[16];
82 static struct thermal_zone_device *thz_dev;
83 static struct thermal_cooling_device *cl_dev;
84 static struct platform_device *acerhdf_dev;
85 
86 module_param(kernelmode, uint, 0);
87 MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
88 module_param(fanon, uint, 0600);
89 MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
90 module_param(fanoff, uint, 0600);
91 MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
92 module_param(verbose, uint, 0600);
93 MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
94 module_param(list_supported, uint, 0600);
95 MODULE_PARM_DESC(list_supported, "List supported models and BIOS versions");
96 module_param_string(force_bios, force_bios, 16, 0);
97 MODULE_PARM_DESC(force_bios, "Pretend system has this known supported BIOS version");
98 module_param_string(force_product, force_product, 16, 0);
99 MODULE_PARM_DESC(force_product, "Pretend system is this known supported model");
100 
101 /*
102  * cmd_off: to switch the fan completely off and check if the fan is off
103  *	cmd_auto: to set the BIOS in control of the fan. The BIOS regulates then
104  *		the fan speed depending on the temperature
105  */
106 struct fancmd {
107 	u8 cmd_off;
108 	u8 cmd_auto;
109 };
110 
111 struct manualcmd {
112 	u8 mreg;
113 	u8 moff;
114 };
115 
116 /* default register and command to disable fan in manual mode */
117 static const struct manualcmd mcmd = {
118 	.mreg = 0x94,
119 	.moff = 0xff,
120 };
121 
122 /* BIOS settings - only used during probe */
123 struct bios_settings {
124 	const char *vendor;
125 	const char *product;
126 	const char *version;
127 	u8 fanreg;
128 	u8 tempreg;
129 	struct fancmd cmd;
130 	int mcmd_enable;
131 };
132 
133 /* This could be a daughter struct in the above, but not worth the redirect */
134 struct ctrl_settings {
135 	u8 fanreg;
136 	u8 tempreg;
137 	struct fancmd cmd;
138 	int mcmd_enable;
139 };
140 
141 static struct thermal_trip trips[] = {
142 	[0] = { .temperature = ACERHDF_DEFAULT_TEMP_FANON,
143 		.hysteresis = ACERHDF_DEFAULT_TEMP_FANON - ACERHDF_DEFAULT_TEMP_FANOFF,
144 		.type = THERMAL_TRIP_ACTIVE },
145 
146 	[1] = { .temperature = ACERHDF_TEMP_CRIT,
147 		.type = THERMAL_TRIP_CRITICAL }
148 };
149 
150 static struct ctrl_settings ctrl_cfg __read_mostly;
151 
152 /* Register addresses and values for different BIOS versions */
153 static const struct bios_settings bios_tbl[] __initconst = {
154 	/* AOA110 */
155 	{"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00}, 0},
156 	{"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00}, 0},
157 	{"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0x00}, 0},
158 	{"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0x00}, 0},
159 	{"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0x00}, 0},
160 	{"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0x00}, 0},
161 	{"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x00}, 0},
162 	{"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x00}, 0},
163 	{"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x00}, 0},
164 	/* AOA150 */
165 	{"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x1f, 0x00}, 0},
166 	{"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x00}, 0},
167 	{"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x00}, 0},
168 	{"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x00}, 0},
169 	{"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x00}, 0},
170 	{"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00}, 0},
171 	{"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00}, 0},
172 	{"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00}, 0},
173 	/* LT1005u */
174 	{"Acer", "LT-10Q", "v0.3310", 0x55, 0x58, {0x20, 0x00}, 0},
175 	/* Acer 1410 */
176 	{"Acer", "Aspire 1410", "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0},
177 	{"Acer", "Aspire 1410", "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0},
178 	{"Acer", "Aspire 1410", "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0},
179 	{"Acer", "Aspire 1410", "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0},
180 	{"Acer", "Aspire 1410", "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0},
181 	{"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0},
182 	{"Acer", "Aspire 1410", "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0},
183 	{"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0},
184 	{"Acer", "Aspire 1410", "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0},
185 	{"Acer", "Aspire 1410", "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0},
186 	{"Acer", "Aspire 1410", "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0},
187 	/* Acer 1810xx */
188 	{"Acer", "Aspire 1810TZ", "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0},
189 	{"Acer", "Aspire 1810T",  "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0},
190 	{"Acer", "Aspire 1810TZ", "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0},
191 	{"Acer", "Aspire 1810T",  "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0},
192 	{"Acer", "Aspire 1810TZ", "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0},
193 	{"Acer", "Aspire 1810T",  "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0},
194 	{"Acer", "Aspire 1810TZ", "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0},
195 	{"Acer", "Aspire 1810T",  "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0},
196 	{"Acer", "Aspire 1810TZ", "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0},
197 	{"Acer", "Aspire 1810T",  "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0},
198 	{"Acer", "Aspire 1810TZ", "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0},
199 	{"Acer", "Aspire 1810T",  "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0},
200 	{"Acer", "Aspire 1810TZ", "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0},
201 	{"Acer", "Aspire 1810T",  "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0},
202 	{"Acer", "Aspire 1810TZ", "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0},
203 	{"Acer", "Aspire 1810T",  "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0},
204 	{"Acer", "Aspire 1810TZ", "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0},
205 	{"Acer", "Aspire 1810T",  "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0},
206 	{"Acer", "Aspire 1810TZ", "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0},
207 	{"Acer", "Aspire 1810T",  "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0},
208 	{"Acer", "Aspire 1810TZ", "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0},
209 	{"Acer", "Aspire 1810T",  "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0},
210 	/* Acer 5755G */
211 	{"Acer", "Aspire 5755G",  "V1.20",   0xab, 0xb4, {0x00, 0x08}, 0},
212 	{"Acer", "Aspire 5755G",  "V1.21",   0xab, 0xb3, {0x00, 0x08}, 0},
213 	/* Acer 521 */
214 	{"Acer", "AO521", "V1.11", 0x55, 0x58, {0x1f, 0x00}, 0},
215 	/* Acer 531 */
216 	{"Acer", "AO531h", "v0.3104", 0x55, 0x58, {0x20, 0x00}, 0},
217 	{"Acer", "AO531h", "v0.3201", 0x55, 0x58, {0x20, 0x00}, 0},
218 	{"Acer", "AO531h", "v0.3304", 0x55, 0x58, {0x20, 0x00}, 0},
219 	/* Acer 751 */
220 	{"Acer", "AO751h", "V0.3206", 0x55, 0x58, {0x21, 0x00}, 0},
221 	{"Acer", "AO751h", "V0.3212", 0x55, 0x58, {0x21, 0x00}, 0},
222 	/* Acer 753 */
223 	{"Acer", "Aspire One 753", "V1.24", 0x93, 0xac, {0x14, 0x04}, 1},
224 	/* Acer 1825 */
225 	{"Acer", "Aspire 1825PTZ", "V1.3118", 0x55, 0x58, {0x9e, 0x00}, 0},
226 	{"Acer", "Aspire 1825PTZ", "V1.3127", 0x55, 0x58, {0x9e, 0x00}, 0},
227 	/* Acer Extensa 5420 */
228 	{"Acer", "Extensa 5420", "V1.17", 0x93, 0xac, {0x14, 0x04}, 1},
229 	/* Acer Aspire 5315 */
230 	{"Acer", "Aspire 5315", "V1.19", 0x93, 0xac, {0x14, 0x04}, 1},
231 	/* Acer Aspire 5739 */
232 	{"Acer", "Aspire 5739G", "V1.3311", 0x55, 0x58, {0x20, 0x00}, 0},
233 	/* Acer TravelMate 7730 */
234 	{"Acer", "TravelMate 7730G", "v0.3509", 0x55, 0x58, {0xaf, 0x00}, 0},
235 	/* Acer Aspire 7551 */
236 	{"Acer", "Aspire 7551", "V1.18", 0x93, 0xa8, {0x14, 0x04}, 1},
237 	/* Acer TravelMate TM8573T */
238 	{"Acer", "TM8573T", "V1.13", 0x93, 0xa8, {0x14, 0x04}, 1},
239 	/* Gateway */
240 	{"Gateway", "AOA110", "v0.3103",  0x55, 0x58, {0x21, 0x00}, 0},
241 	{"Gateway", "AOA150", "v0.3103",  0x55, 0x58, {0x20, 0x00}, 0},
242 	{"Gateway", "LT31",   "v1.3103",  0x55, 0x58, {0x9e, 0x00}, 0},
243 	{"Gateway", "LT31",   "v1.3201",  0x55, 0x58, {0x9e, 0x00}, 0},
244 	{"Gateway", "LT31",   "v1.3302",  0x55, 0x58, {0x9e, 0x00}, 0},
245 	{"Gateway", "LT31",   "v1.3303t", 0x55, 0x58, {0x9e, 0x00}, 0},
246 	{"Gateway", "LT31",   "v1.3307",  0x55, 0x58, {0x9e, 0x00}, 0},
247 	/* Packard Bell */
248 	{"Packard Bell", "DOA150",  "v0.3104",  0x55, 0x58, {0x21, 0x00}, 0},
249 	{"Packard Bell", "DOA150",  "v0.3105",  0x55, 0x58, {0x20, 0x00}, 0},
250 	{"Packard Bell", "AOA110",  "v0.3105",  0x55, 0x58, {0x21, 0x00}, 0},
251 	{"Packard Bell", "AOA150",  "v0.3105",  0x55, 0x58, {0x20, 0x00}, 0},
252 	{"Packard Bell", "ENBFT",   "V1.3118",  0x55, 0x58, {0x9e, 0x00}, 0},
253 	{"Packard Bell", "ENBFT",   "V1.3127",  0x55, 0x58, {0x9e, 0x00}, 0},
254 	{"Packard Bell", "DOTMU",   "v1.3303",  0x55, 0x58, {0x9e, 0x00}, 0},
255 	{"Packard Bell", "DOTMU",   "v0.3120",  0x55, 0x58, {0x9e, 0x00}, 0},
256 	{"Packard Bell", "DOTMU",   "v0.3108",  0x55, 0x58, {0x9e, 0x00}, 0},
257 	{"Packard Bell", "DOTMU",   "v0.3113",  0x55, 0x58, {0x9e, 0x00}, 0},
258 	{"Packard Bell", "DOTMU",   "v0.3115",  0x55, 0x58, {0x9e, 0x00}, 0},
259 	{"Packard Bell", "DOTMU",   "v0.3117",  0x55, 0x58, {0x9e, 0x00}, 0},
260 	{"Packard Bell", "DOTMU",   "v0.3119",  0x55, 0x58, {0x9e, 0x00}, 0},
261 	{"Packard Bell", "DOTMU",   "v1.3204",  0x55, 0x58, {0x9e, 0x00}, 0},
262 	{"Packard Bell", "DOTMA",   "v1.3201",  0x55, 0x58, {0x9e, 0x00}, 0},
263 	{"Packard Bell", "DOTMA",   "v1.3302",  0x55, 0x58, {0x9e, 0x00}, 0},
264 	{"Packard Bell", "DOTMA",   "v1.3303t", 0x55, 0x58, {0x9e, 0x00}, 0},
265 	{"Packard Bell", "DOTVR46", "v1.3308",  0x55, 0x58, {0x9e, 0x00}, 0},
266 	/* pewpew-terminator */
267 	{"", "", "", 0, 0, {0, 0}, 0}
268 };
269 
270 /*
271  * this struct is used to instruct thermal layer to use bang_bang instead of
272  * default governor for acerhdf
273  */
274 static struct thermal_zone_params acerhdf_zone_params = {
275 	.governor_name = "bang_bang",
276 };
277 
278 static int acerhdf_get_temp(int *temp)
279 {
280 	u8 read_temp;
281 
282 	if (ec_read(ctrl_cfg.tempreg, &read_temp))
283 		return -EINVAL;
284 
285 	*temp = read_temp * 1000;
286 
287 	return 0;
288 }
289 
290 static int acerhdf_get_fanstate(int *state)
291 {
292 	u8 fan;
293 
294 	if (ec_read(ctrl_cfg.fanreg, &fan))
295 		return -EINVAL;
296 
297 	if (fan != ctrl_cfg.cmd.cmd_off)
298 		*state = ACERHDF_FAN_AUTO;
299 	else
300 		*state = ACERHDF_FAN_OFF;
301 
302 	return 0;
303 }
304 
305 static void acerhdf_change_fanstate(int state)
306 {
307 	unsigned char cmd;
308 
309 	if (verbose)
310 		pr_notice("fan %s\n", state == ACERHDF_FAN_OFF ? "OFF" : "ON");
311 
312 	if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
313 		pr_err("invalid fan state %d requested, setting to auto!\n",
314 		       state);
315 		state = ACERHDF_FAN_AUTO;
316 	}
317 
318 	cmd = (state == ACERHDF_FAN_OFF) ? ctrl_cfg.cmd.cmd_off
319 					 : ctrl_cfg.cmd.cmd_auto;
320 	fanstate = state;
321 
322 	ec_write(ctrl_cfg.fanreg, cmd);
323 
324 	if (ctrl_cfg.mcmd_enable && state == ACERHDF_FAN_OFF) {
325 		if (verbose)
326 			pr_notice("turning off fan manually\n");
327 		ec_write(mcmd.mreg, mcmd.moff);
328 	}
329 }
330 
331 static void acerhdf_check_param(struct thermal_zone_device *thermal)
332 {
333 	if (fanon > ACERHDF_MAX_FANON) {
334 		pr_err("fanon temperature too high, set to %d\n",
335 		       ACERHDF_MAX_FANON);
336 		fanon = ACERHDF_MAX_FANON;
337 	}
338 
339 	if (fanon < fanoff) {
340 		pr_err("fanoff temperature (%d) is above fanon temperature (%d), clamping to %d\n",
341 		       fanoff, fanon, fanon);
342 		fanoff = fanon;
343 	}
344 
345 	trips[0].temperature = fanon;
346 	trips[0].hysteresis  = fanon - fanoff;
347 
348 	if (kernelmode) {
349 		if (interval > ACERHDF_MAX_INTERVAL) {
350 			pr_err("interval too high, set to %d\n",
351 			       ACERHDF_MAX_INTERVAL);
352 			interval = ACERHDF_MAX_INTERVAL;
353 		}
354 
355 		if (verbose)
356 			pr_notice("interval changed to: %d\n", interval);
357 	}
358 }
359 
360 /*
361  * This is the thermal zone callback which does the delayed polling of the fan
362  * state. We do check /sysfs-originating settings here in acerhdf_check_param()
363  * as late as the polling interval is since we can't do that in the respective
364  * accessors of the module parameters.
365  */
366 static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal, int *t)
367 {
368 	int temp, err = 0;
369 
370 	err = acerhdf_get_temp(&temp);
371 	if (err)
372 		return err;
373 
374 	if (verbose)
375 		pr_notice("temp %d\n", temp);
376 
377 	*t = temp;
378 	return 0;
379 }
380 
381 static int acerhdf_bind(struct thermal_zone_device *thermal,
382 			struct thermal_cooling_device *cdev)
383 {
384 	/* if the cooling device is the one from acerhdf bind it */
385 	if (cdev != cl_dev)
386 		return 0;
387 
388 	if (thermal_zone_bind_cooling_device(thermal, 0, cdev,
389 			THERMAL_NO_LIMIT, THERMAL_NO_LIMIT,
390 			THERMAL_WEIGHT_DEFAULT)) {
391 		pr_err("error binding cooling dev\n");
392 		return -EINVAL;
393 	}
394 	return 0;
395 }
396 
397 static int acerhdf_unbind(struct thermal_zone_device *thermal,
398 			  struct thermal_cooling_device *cdev)
399 {
400 	if (cdev != cl_dev)
401 		return 0;
402 
403 	if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
404 		pr_err("error unbinding cooling dev\n");
405 		return -EINVAL;
406 	}
407 	return 0;
408 }
409 
410 static inline void acerhdf_revert_to_bios_mode(void)
411 {
412 	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
413 	kernelmode = 0;
414 
415 	pr_notice("kernel mode fan control OFF\n");
416 }
417 static inline void acerhdf_enable_kernelmode(void)
418 {
419 	kernelmode = 1;
420 
421 	pr_notice("kernel mode fan control ON\n");
422 }
423 
424 /*
425  * set operation mode;
426  * enabled: the thermal layer of the kernel takes care about
427  *          the temperature and the fan.
428  * disabled: the BIOS takes control of the fan.
429  */
430 static int acerhdf_change_mode(struct thermal_zone_device *thermal,
431 			       enum thermal_device_mode mode)
432 {
433 	if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
434 		acerhdf_revert_to_bios_mode();
435 	else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
436 		acerhdf_enable_kernelmode();
437 
438 	return 0;
439 }
440 
441 static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
442 				 int *temperature)
443 {
444 	*temperature = ACERHDF_TEMP_CRIT;
445 	return 0;
446 }
447 
448 /* bind callback functions to thermalzone */
449 static struct thermal_zone_device_ops acerhdf_dev_ops = {
450 	.bind = acerhdf_bind,
451 	.unbind = acerhdf_unbind,
452 	.get_temp = acerhdf_get_ec_temp,
453 	.change_mode = acerhdf_change_mode,
454 	.get_crit_temp = acerhdf_get_crit_temp,
455 };
456 
457 /*
458  * cooling device callback functions
459  * get maximal fan cooling state
460  */
461 static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
462 				 unsigned long *state)
463 {
464 	*state = 1;
465 
466 	return 0;
467 }
468 
469 static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
470 				 unsigned long *state)
471 {
472 	int err = 0, tmp;
473 
474 	err = acerhdf_get_fanstate(&tmp);
475 	if (err)
476 		return err;
477 
478 	*state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
479 	return 0;
480 }
481 
482 /* change current fan state - is overwritten when running in kernel mode */
483 static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
484 				 unsigned long state)
485 {
486 	int cur_temp, cur_state, err = 0;
487 
488 	if (!kernelmode)
489 		return 0;
490 
491 	err = acerhdf_get_temp(&cur_temp);
492 	if (err) {
493 		pr_err("error reading temperature, hand off control to BIOS\n");
494 		goto err_out;
495 	}
496 
497 	err = acerhdf_get_fanstate(&cur_state);
498 	if (err) {
499 		pr_err("error reading fan state, hand off control to BIOS\n");
500 		goto err_out;
501 	}
502 
503 	if (state == 0) {
504 		if (cur_state == ACERHDF_FAN_AUTO)
505 			acerhdf_change_fanstate(ACERHDF_FAN_OFF);
506 	} else {
507 		if (cur_state == ACERHDF_FAN_OFF)
508 			acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
509 	}
510 	return 0;
511 
512 err_out:
513 	acerhdf_revert_to_bios_mode();
514 	return -EINVAL;
515 }
516 
517 /* bind fan callbacks to fan device */
518 static const struct thermal_cooling_device_ops acerhdf_cooling_ops = {
519 	.get_max_state = acerhdf_get_max_state,
520 	.get_cur_state = acerhdf_get_cur_state,
521 	.set_cur_state = acerhdf_set_cur_state,
522 };
523 
524 /* suspend / resume functionality */
525 static int acerhdf_suspend(struct device *dev)
526 {
527 	if (kernelmode)
528 		acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
529 
530 	if (verbose)
531 		pr_notice("going suspend\n");
532 
533 	return 0;
534 }
535 
536 static int acerhdf_probe(struct platform_device *device)
537 {
538 	return 0;
539 }
540 
541 static const struct dev_pm_ops acerhdf_pm_ops = {
542 	.suspend = acerhdf_suspend,
543 	.freeze  = acerhdf_suspend,
544 };
545 
546 static struct platform_driver acerhdf_driver = {
547 	.driver = {
548 		.name  = "acerhdf",
549 		.pm    = &acerhdf_pm_ops,
550 	},
551 	.probe = acerhdf_probe,
552 };
553 
554 /* check hardware */
555 static int __init acerhdf_check_hardware(void)
556 {
557 	char const *vendor, *version, *product;
558 	const struct bios_settings *bt = NULL;
559 	int found = 0;
560 
561 	/* get BIOS data */
562 	vendor  = dmi_get_system_info(DMI_SYS_VENDOR);
563 	version = dmi_get_system_info(DMI_BIOS_VERSION);
564 	product = dmi_get_system_info(DMI_PRODUCT_NAME);
565 
566 	if (!vendor || !version || !product) {
567 		pr_err("error getting hardware information\n");
568 		return -EINVAL;
569 	}
570 
571 	pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
572 
573 	if (list_supported) {
574 		pr_info("List of supported Manufacturer/Model/BIOS:\n");
575 		pr_info("---------------------------------------------------\n");
576 		for (bt = bios_tbl; bt->vendor[0]; bt++) {
577 			pr_info("%-13s | %-17s | %-10s\n", bt->vendor,
578 				bt->product, bt->version);
579 		}
580 		pr_info("---------------------------------------------------\n");
581 		return -ECANCELED;
582 	}
583 
584 	if (force_bios[0]) {
585 		version = force_bios;
586 		pr_info("forcing BIOS version: %s\n", version);
587 		kernelmode = 0;
588 	}
589 
590 	if (force_product[0]) {
591 		product = force_product;
592 		pr_info("forcing BIOS product: %s\n", product);
593 		kernelmode = 0;
594 	}
595 
596 	if (verbose)
597 		pr_info("BIOS info: %s %s, product: %s\n",
598 			vendor, version, product);
599 
600 	/* search BIOS version and vendor in BIOS settings table */
601 	for (bt = bios_tbl; bt->vendor[0]; bt++) {
602 		/*
603 		 * check if actual hardware BIOS vendor, product and version
604 		 * IDs start with the strings of BIOS table entry
605 		 */
606 		if (strstarts(vendor, bt->vendor) &&
607 		    strstarts(product, bt->product) &&
608 		    strstarts(version, bt->version)) {
609 			found = 1;
610 			break;
611 		}
612 	}
613 
614 	if (!found) {
615 		pr_err("unknown (unsupported) BIOS version %s/%s/%s, please report, aborting!\n",
616 		       vendor, product, version);
617 		return -EINVAL;
618 	}
619 
620 	/* Copy control settings from BIOS table before we free it. */
621 	ctrl_cfg.fanreg = bt->fanreg;
622 	ctrl_cfg.tempreg = bt->tempreg;
623 	memcpy(&ctrl_cfg.cmd, &bt->cmd, sizeof(struct fancmd));
624 	ctrl_cfg.mcmd_enable = bt->mcmd_enable;
625 
626 	/*
627 	 * if started with kernel mode off, prevent the kernel from switching
628 	 * off the fan
629 	 */
630 	if (!kernelmode) {
631 		pr_notice("Fan control off, to enable do:\n");
632 		pr_notice("echo -n \"enabled\" > /sys/class/thermal/thermal_zoneN/mode # N=0,1,2...\n");
633 	}
634 
635 	return 0;
636 }
637 
638 static int __init acerhdf_register_platform(void)
639 {
640 	int err = 0;
641 
642 	err = platform_driver_register(&acerhdf_driver);
643 	if (err)
644 		return err;
645 
646 	acerhdf_dev = platform_device_alloc("acerhdf", PLATFORM_DEVID_NONE);
647 	if (!acerhdf_dev) {
648 		err = -ENOMEM;
649 		goto err_device_alloc;
650 	}
651 	err = platform_device_add(acerhdf_dev);
652 	if (err)
653 		goto err_device_add;
654 
655 	return 0;
656 
657 err_device_add:
658 	platform_device_put(acerhdf_dev);
659 err_device_alloc:
660 	platform_driver_unregister(&acerhdf_driver);
661 	return err;
662 }
663 
664 static void acerhdf_unregister_platform(void)
665 {
666 	platform_device_unregister(acerhdf_dev);
667 	platform_driver_unregister(&acerhdf_driver);
668 }
669 
670 static int __init acerhdf_register_thermal(void)
671 {
672 	int ret;
673 
674 	cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
675 						 &acerhdf_cooling_ops);
676 
677 	if (IS_ERR(cl_dev))
678 		return -EINVAL;
679 
680 	thz_dev = thermal_zone_device_register_with_trips("acerhdf", trips, ARRAY_SIZE(trips),
681 							  NULL, &acerhdf_dev_ops,
682 							  &acerhdf_zone_params, 0,
683 							  (kernelmode) ? interval*1000 : 0);
684 	if (IS_ERR(thz_dev))
685 		return -EINVAL;
686 
687 	if (kernelmode)
688 		ret = thermal_zone_device_enable(thz_dev);
689 	else
690 		ret = thermal_zone_device_disable(thz_dev);
691 	if (ret)
692 		return ret;
693 
694 	return 0;
695 }
696 
697 static void acerhdf_unregister_thermal(void)
698 {
699 	if (cl_dev) {
700 		thermal_cooling_device_unregister(cl_dev);
701 		cl_dev = NULL;
702 	}
703 
704 	if (thz_dev) {
705 		thermal_zone_device_unregister(thz_dev);
706 		thz_dev = NULL;
707 	}
708 }
709 
710 static int __init acerhdf_init(void)
711 {
712 	int err = 0;
713 
714 	err = acerhdf_check_hardware();
715 	if (err)
716 		goto out_err;
717 
718 	err = acerhdf_register_platform();
719 	if (err)
720 		goto out_err;
721 
722 	err = acerhdf_register_thermal();
723 	if (err)
724 		goto err_unreg;
725 
726 	return 0;
727 
728 err_unreg:
729 	acerhdf_unregister_thermal();
730 	acerhdf_unregister_platform();
731 
732 out_err:
733 	return err;
734 }
735 
736 static void __exit acerhdf_exit(void)
737 {
738 	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
739 	acerhdf_unregister_thermal();
740 	acerhdf_unregister_platform();
741 }
742 
743 MODULE_LICENSE("GPL");
744 MODULE_AUTHOR("Peter Kaestle");
745 MODULE_DESCRIPTION("Aspire One temperature and fan driver");
746 MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:");
747 MODULE_ALIAS("dmi:*:*Acer*:pnAO751h*:");
748 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1410*:");
749 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1810*:");
750 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5755G:");
751 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1825PTZ:");
752 MODULE_ALIAS("dmi:*:*Acer*:pnAO521*:");
753 MODULE_ALIAS("dmi:*:*Acer*:pnAO531*:");
754 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5739G:");
755 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*One*753:");
756 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5315:");
757 MODULE_ALIAS("dmi:*:*Acer*:TravelMate*7730G:");
758 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*7551:");
759 MODULE_ALIAS("dmi:*:*Acer*:TM8573T:");
760 MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:");
761 MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:");
762 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnAOA*:");
763 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOA*:");
764 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMU*:");
765 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnENBFT*:");
766 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMA*:");
767 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTVR46*:");
768 MODULE_ALIAS("dmi:*:*Acer*:pnExtensa*5420*:");
769 
770 module_init(acerhdf_init);
771 module_exit(acerhdf_exit);
772 
773 static int interval_set_uint(const char *val, const struct kernel_param *kp)
774 {
775 	int ret;
776 
777 	ret = param_set_uint(val, kp);
778 	if (ret)
779 		return ret;
780 
781 	acerhdf_check_param(thz_dev);
782 
783 	return 0;
784 }
785 
786 static const struct kernel_param_ops interval_ops = {
787 	.set = interval_set_uint,
788 	.get = param_get_uint,
789 };
790 
791 module_param_cb(interval, &interval_ops, &interval, 0000);
792 MODULE_PARM_DESC(interval, "Polling interval of temperature check");
793