xref: /linux/drivers/platform/x86/acerhdf.c (revision c060f8168bdf22aa986970955af99702d142dfbe)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * acerhdf - A driver which monitors the temperature
4  *           of the aspire one netbook, turns on/off the fan
5  *           as soon as the upper/lower threshold is reached.
6  *
7  * (C) 2009 - Peter Kaestle     peter (a) piie.net
8  *                              https://piie.net
9  *     2009 Borislav Petkov	bp (a) alien8.de
10  *
11  * Inspired by and many thanks to:
12  *  o acerfand   - Rachel Greenham
13  *  o acer_ec.pl - Michael Kurz     michi.kurz (at) googlemail.com
14  *               - Petr Tomasek     tomasek (#) etf,cuni,cz
15  *               - Carlos Corbacho  cathectic (at) gmail.com
16  *  o lkml       - Matthew Garrett
17  *               - Borislav Petkov
18  *               - Andreas Mohr
19  */
20 
21 #define pr_fmt(fmt) "acerhdf: " fmt
22 
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/dmi.h>
26 #include <linux/acpi.h>
27 #include <linux/thermal.h>
28 #include <linux/platform_device.h>
29 
30 /*
31  * The driver is started with "kernel mode off" by default. That means, the BIOS
32  * is still in control of the fan. In this mode the driver allows to read the
33  * temperature of the cpu and a userspace tool may take over control of the fan.
34  * If the driver is switched to "kernel mode" (e.g. via module parameter) the
35  * driver is in full control of the fan. If you want the module to be started in
36  * kernel mode by default, define the following:
37  */
38 #undef START_IN_KERNEL_MODE
39 
40 #define DRV_VER "0.7.0"
41 
42 /*
43  * According to the Atom N270 datasheet,
44  * (http://download.intel.com/design/processor/datashts/320032.pdf) the
45  * CPU's optimal operating limits denoted in junction temperature as
46  * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
47  * assume 89°C is critical temperature.
48  */
49 #define ACERHDF_DEFAULT_TEMP_FANON 60000
50 #define ACERHDF_DEFAULT_TEMP_FANOFF 53000
51 #define ACERHDF_TEMP_CRIT 89000
52 #define ACERHDF_FAN_OFF 0
53 #define ACERHDF_FAN_AUTO 1
54 
55 /*
56  * No matter what value the user puts into the fanon variable, turn on the fan
57  * at 80 degree Celsius to prevent hardware damage
58  */
59 #define ACERHDF_MAX_FANON 80000
60 
61 /*
62  * Maximum interval between two temperature checks is 15 seconds, as the die
63  * can get hot really fast under heavy load (plus we shouldn't forget about
64  * possible impact of _external_ aggressive sources such as heaters, sun etc.)
65  */
66 #define ACERHDF_MAX_INTERVAL 15
67 
68 #ifdef START_IN_KERNEL_MODE
69 static int kernelmode = 1;
70 #else
71 static int kernelmode;
72 #endif
73 
74 static unsigned int interval = 10;
75 static unsigned int fanon = ACERHDF_DEFAULT_TEMP_FANON;
76 static unsigned int fanoff = ACERHDF_DEFAULT_TEMP_FANOFF;
77 static unsigned int verbose;
78 static unsigned int list_supported;
79 static unsigned int fanstate = ACERHDF_FAN_AUTO;
80 static char force_bios[16];
81 static char force_product[16];
82 static struct thermal_zone_device *thz_dev;
83 static struct thermal_cooling_device *cl_dev;
84 static struct platform_device *acerhdf_dev;
85 
86 module_param(kernelmode, uint, 0);
87 MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
88 module_param(fanon, uint, 0600);
89 MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
90 module_param(fanoff, uint, 0600);
91 MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
92 module_param(verbose, uint, 0600);
93 MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
94 module_param(list_supported, uint, 0600);
95 MODULE_PARM_DESC(list_supported, "List supported models and BIOS versions");
96 module_param_string(force_bios, force_bios, 16, 0);
97 MODULE_PARM_DESC(force_bios, "Pretend system has this known supported BIOS version");
98 module_param_string(force_product, force_product, 16, 0);
99 MODULE_PARM_DESC(force_product, "Pretend system is this known supported model");
100 
101 /*
102  * cmd_off: to switch the fan completely off and check if the fan is off
103  *	cmd_auto: to set the BIOS in control of the fan. The BIOS regulates then
104  *		the fan speed depending on the temperature
105  */
106 struct fancmd {
107 	u8 cmd_off;
108 	u8 cmd_auto;
109 };
110 
111 struct manualcmd {
112 	u8 mreg;
113 	u8 moff;
114 };
115 
116 /* default register and command to disable fan in manual mode */
117 static const struct manualcmd mcmd = {
118 	.mreg = 0x94,
119 	.moff = 0xff,
120 };
121 
122 /* BIOS settings - only used during probe */
123 struct bios_settings {
124 	const char *vendor;
125 	const char *product;
126 	const char *version;
127 	u8 fanreg;
128 	u8 tempreg;
129 	struct fancmd cmd;
130 	int mcmd_enable;
131 };
132 
133 /* This could be a daughter struct in the above, but not worth the redirect */
134 struct ctrl_settings {
135 	u8 fanreg;
136 	u8 tempreg;
137 	struct fancmd cmd;
138 	int mcmd_enable;
139 };
140 
141 static struct thermal_trip trips[] = {
142 	[0] = { .temperature = ACERHDF_DEFAULT_TEMP_FANON,
143 		.hysteresis = ACERHDF_DEFAULT_TEMP_FANON - ACERHDF_DEFAULT_TEMP_FANOFF,
144 		.type = THERMAL_TRIP_ACTIVE },
145 
146 	[1] = { .temperature = ACERHDF_TEMP_CRIT,
147 		.type = THERMAL_TRIP_CRITICAL }
148 };
149 
150 static struct ctrl_settings ctrl_cfg __read_mostly;
151 
152 /* Register addresses and values for different BIOS versions */
153 static const struct bios_settings bios_tbl[] __initconst = {
154 	/* AOA110 */
155 	{"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00}, 0},
156 	{"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00}, 0},
157 	{"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0x00}, 0},
158 	{"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0x00}, 0},
159 	{"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0x00}, 0},
160 	{"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0x00}, 0},
161 	{"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x00}, 0},
162 	{"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x00}, 0},
163 	{"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x00}, 0},
164 	/* AOA150 */
165 	{"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x1f, 0x00}, 0},
166 	{"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x00}, 0},
167 	{"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x00}, 0},
168 	{"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x00}, 0},
169 	{"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x00}, 0},
170 	{"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00}, 0},
171 	{"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00}, 0},
172 	{"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00}, 0},
173 	/* LT1005u */
174 	{"Acer", "LT-10Q", "v0.3310", 0x55, 0x58, {0x20, 0x00}, 0},
175 	/* Acer 1410 */
176 	{"Acer", "Aspire 1410", "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0},
177 	{"Acer", "Aspire 1410", "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0},
178 	{"Acer", "Aspire 1410", "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0},
179 	{"Acer", "Aspire 1410", "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0},
180 	{"Acer", "Aspire 1410", "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0},
181 	{"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0},
182 	{"Acer", "Aspire 1410", "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0},
183 	{"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0},
184 	{"Acer", "Aspire 1410", "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0},
185 	{"Acer", "Aspire 1410", "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0},
186 	{"Acer", "Aspire 1410", "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0},
187 	/* Acer 1810xx */
188 	{"Acer", "Aspire 1810TZ", "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0},
189 	{"Acer", "Aspire 1810T",  "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0},
190 	{"Acer", "Aspire 1810TZ", "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0},
191 	{"Acer", "Aspire 1810T",  "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0},
192 	{"Acer", "Aspire 1810TZ", "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0},
193 	{"Acer", "Aspire 1810T",  "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0},
194 	{"Acer", "Aspire 1810TZ", "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0},
195 	{"Acer", "Aspire 1810T",  "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0},
196 	{"Acer", "Aspire 1810TZ", "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0},
197 	{"Acer", "Aspire 1810T",  "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0},
198 	{"Acer", "Aspire 1810TZ", "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0},
199 	{"Acer", "Aspire 1810T",  "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0},
200 	{"Acer", "Aspire 1810TZ", "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0},
201 	{"Acer", "Aspire 1810T",  "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0},
202 	{"Acer", "Aspire 1810TZ", "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0},
203 	{"Acer", "Aspire 1810T",  "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0},
204 	{"Acer", "Aspire 1810TZ", "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0},
205 	{"Acer", "Aspire 1810T",  "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0},
206 	{"Acer", "Aspire 1810TZ", "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0},
207 	{"Acer", "Aspire 1810T",  "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0},
208 	{"Acer", "Aspire 1810TZ", "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0},
209 	{"Acer", "Aspire 1810T",  "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0},
210 	/* Acer 5755G */
211 	{"Acer", "Aspire 5755G",  "V1.20",   0xab, 0xb4, {0x00, 0x08}, 0},
212 	{"Acer", "Aspire 5755G",  "V1.21",   0xab, 0xb3, {0x00, 0x08}, 0},
213 	/* Acer 521 */
214 	{"Acer", "AO521", "V1.11", 0x55, 0x58, {0x1f, 0x00}, 0},
215 	/* Acer 531 */
216 	{"Acer", "AO531h", "v0.3104", 0x55, 0x58, {0x20, 0x00}, 0},
217 	{"Acer", "AO531h", "v0.3201", 0x55, 0x58, {0x20, 0x00}, 0},
218 	{"Acer", "AO531h", "v0.3304", 0x55, 0x58, {0x20, 0x00}, 0},
219 	/* Acer 751 */
220 	{"Acer", "AO751h", "V0.3206", 0x55, 0x58, {0x21, 0x00}, 0},
221 	{"Acer", "AO751h", "V0.3212", 0x55, 0x58, {0x21, 0x00}, 0},
222 	/* Acer 753 */
223 	{"Acer", "Aspire One 753", "V1.24", 0x93, 0xac, {0x14, 0x04}, 1},
224 	/* Acer 1825 */
225 	{"Acer", "Aspire 1825PTZ", "V1.3118", 0x55, 0x58, {0x9e, 0x00}, 0},
226 	{"Acer", "Aspire 1825PTZ", "V1.3127", 0x55, 0x58, {0x9e, 0x00}, 0},
227 	/* Acer Extensa 5420 */
228 	{"Acer", "Extensa 5420", "V1.17", 0x93, 0xac, {0x14, 0x04}, 1},
229 	/* Acer Aspire 5315 */
230 	{"Acer", "Aspire 5315", "V1.19", 0x93, 0xac, {0x14, 0x04}, 1},
231 	/* Acer Aspire 5739 */
232 	{"Acer", "Aspire 5739G", "V1.3311", 0x55, 0x58, {0x20, 0x00}, 0},
233 	/* Acer TravelMate 7730 */
234 	{"Acer", "TravelMate 7730G", "v0.3509", 0x55, 0x58, {0xaf, 0x00}, 0},
235 	/* Acer Aspire 7551 */
236 	{"Acer", "Aspire 7551", "V1.18", 0x93, 0xa8, {0x14, 0x04}, 1},
237 	/* Acer TravelMate TM8573T */
238 	{"Acer", "TM8573T", "V1.13", 0x93, 0xa8, {0x14, 0x04}, 1},
239 	/* Gateway */
240 	{"Gateway", "AOA110", "v0.3103",  0x55, 0x58, {0x21, 0x00}, 0},
241 	{"Gateway", "AOA150", "v0.3103",  0x55, 0x58, {0x20, 0x00}, 0},
242 	{"Gateway", "LT31",   "v1.3103",  0x55, 0x58, {0x9e, 0x00}, 0},
243 	{"Gateway", "LT31",   "v1.3201",  0x55, 0x58, {0x9e, 0x00}, 0},
244 	{"Gateway", "LT31",   "v1.3302",  0x55, 0x58, {0x9e, 0x00}, 0},
245 	{"Gateway", "LT31",   "v1.3303t", 0x55, 0x58, {0x9e, 0x00}, 0},
246 	{"Gateway", "LT31",   "v1.3307",  0x55, 0x58, {0x9e, 0x00}, 0},
247 	/* Packard Bell */
248 	{"Packard Bell", "DOA150",  "v0.3104",  0x55, 0x58, {0x21, 0x00}, 0},
249 	{"Packard Bell", "DOA150",  "v0.3105",  0x55, 0x58, {0x20, 0x00}, 0},
250 	{"Packard Bell", "AOA110",  "v0.3105",  0x55, 0x58, {0x21, 0x00}, 0},
251 	{"Packard Bell", "AOA150",  "v0.3105",  0x55, 0x58, {0x20, 0x00}, 0},
252 	{"Packard Bell", "ENBFT",   "V1.3118",  0x55, 0x58, {0x9e, 0x00}, 0},
253 	{"Packard Bell", "ENBFT",   "V1.3127",  0x55, 0x58, {0x9e, 0x00}, 0},
254 	{"Packard Bell", "DOTMU",   "v1.3303",  0x55, 0x58, {0x9e, 0x00}, 0},
255 	{"Packard Bell", "DOTMU",   "v0.3120",  0x55, 0x58, {0x9e, 0x00}, 0},
256 	{"Packard Bell", "DOTMU",   "v0.3108",  0x55, 0x58, {0x9e, 0x00}, 0},
257 	{"Packard Bell", "DOTMU",   "v0.3113",  0x55, 0x58, {0x9e, 0x00}, 0},
258 	{"Packard Bell", "DOTMU",   "v0.3115",  0x55, 0x58, {0x9e, 0x00}, 0},
259 	{"Packard Bell", "DOTMU",   "v0.3117",  0x55, 0x58, {0x9e, 0x00}, 0},
260 	{"Packard Bell", "DOTMU",   "v0.3119",  0x55, 0x58, {0x9e, 0x00}, 0},
261 	{"Packard Bell", "DOTMU",   "v1.3204",  0x55, 0x58, {0x9e, 0x00}, 0},
262 	{"Packard Bell", "DOTMA",   "v1.3201",  0x55, 0x58, {0x9e, 0x00}, 0},
263 	{"Packard Bell", "DOTMA",   "v1.3302",  0x55, 0x58, {0x9e, 0x00}, 0},
264 	{"Packard Bell", "DOTMA",   "v1.3303t", 0x55, 0x58, {0x9e, 0x00}, 0},
265 	{"Packard Bell", "DOTVR46", "v1.3308",  0x55, 0x58, {0x9e, 0x00}, 0},
266 	/* pewpew-terminator */
267 	{"", "", "", 0, 0, {0, 0}, 0}
268 };
269 
270 /*
271  * this struct is used to instruct thermal layer to use bang_bang instead of
272  * default governor for acerhdf
273  */
274 static struct thermal_zone_params acerhdf_zone_params = {
275 	.governor_name = "bang_bang",
276 };
277 
278 static int acerhdf_get_temp(int *temp)
279 {
280 	u8 read_temp;
281 
282 	if (ec_read(ctrl_cfg.tempreg, &read_temp))
283 		return -EINVAL;
284 
285 	*temp = read_temp * 1000;
286 
287 	return 0;
288 }
289 
290 static int acerhdf_get_fanstate(int *state)
291 {
292 	u8 fan;
293 
294 	if (ec_read(ctrl_cfg.fanreg, &fan))
295 		return -EINVAL;
296 
297 	if (fan != ctrl_cfg.cmd.cmd_off)
298 		*state = ACERHDF_FAN_AUTO;
299 	else
300 		*state = ACERHDF_FAN_OFF;
301 
302 	return 0;
303 }
304 
305 static void acerhdf_change_fanstate(int state)
306 {
307 	unsigned char cmd;
308 
309 	if (verbose)
310 		pr_notice("fan %s\n", state == ACERHDF_FAN_OFF ? "OFF" : "ON");
311 
312 	if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
313 		pr_err("invalid fan state %d requested, setting to auto!\n",
314 		       state);
315 		state = ACERHDF_FAN_AUTO;
316 	}
317 
318 	cmd = (state == ACERHDF_FAN_OFF) ? ctrl_cfg.cmd.cmd_off
319 					 : ctrl_cfg.cmd.cmd_auto;
320 	fanstate = state;
321 
322 	ec_write(ctrl_cfg.fanreg, cmd);
323 
324 	if (ctrl_cfg.mcmd_enable && state == ACERHDF_FAN_OFF) {
325 		if (verbose)
326 			pr_notice("turning off fan manually\n");
327 		ec_write(mcmd.mreg, mcmd.moff);
328 	}
329 }
330 
331 static void acerhdf_check_param(struct thermal_zone_device *thermal)
332 {
333 	if (fanon > ACERHDF_MAX_FANON) {
334 		pr_err("fanon temperature too high, set to %d\n",
335 		       ACERHDF_MAX_FANON);
336 		fanon = ACERHDF_MAX_FANON;
337 	}
338 
339 	if (fanon < fanoff) {
340 		pr_err("fanoff temperature (%d) is above fanon temperature (%d), clamping to %d\n",
341 		       fanoff, fanon, fanon);
342 		fanoff = fanon;
343 	}
344 
345 	trips[0].temperature = fanon;
346 	trips[0].hysteresis  = fanon - fanoff;
347 
348 	if (kernelmode) {
349 		if (interval > ACERHDF_MAX_INTERVAL) {
350 			pr_err("interval too high, set to %d\n",
351 			       ACERHDF_MAX_INTERVAL);
352 			interval = ACERHDF_MAX_INTERVAL;
353 		}
354 
355 		if (verbose)
356 			pr_notice("interval changed to: %d\n", interval);
357 	}
358 }
359 
360 /*
361  * This is the thermal zone callback which does the delayed polling of the fan
362  * state. We do check /sysfs-originating settings here in acerhdf_check_param()
363  * as late as the polling interval is since we can't do that in the respective
364  * accessors of the module parameters.
365  */
366 static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal, int *t)
367 {
368 	int temp, err = 0;
369 
370 	err = acerhdf_get_temp(&temp);
371 	if (err)
372 		return err;
373 
374 	if (verbose)
375 		pr_notice("temp %d\n", temp);
376 
377 	*t = temp;
378 	return 0;
379 }
380 
381 static bool acerhdf_should_bind(struct thermal_zone_device *thermal,
382 				const struct thermal_trip *trip,
383 				struct thermal_cooling_device *cdev,
384 				struct cooling_spec *c)
385 {
386 	/* if the cooling device is the one from acerhdf bind it */
387 	return cdev == cl_dev && trip->type == THERMAL_TRIP_ACTIVE;
388 }
389 
390 static inline void acerhdf_revert_to_bios_mode(void)
391 {
392 	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
393 	kernelmode = 0;
394 
395 	pr_notice("kernel mode fan control OFF\n");
396 }
397 static inline void acerhdf_enable_kernelmode(void)
398 {
399 	kernelmode = 1;
400 
401 	pr_notice("kernel mode fan control ON\n");
402 }
403 
404 /*
405  * set operation mode;
406  * enabled: the thermal layer of the kernel takes care about
407  *          the temperature and the fan.
408  * disabled: the BIOS takes control of the fan.
409  */
410 static int acerhdf_change_mode(struct thermal_zone_device *thermal,
411 			       enum thermal_device_mode mode)
412 {
413 	if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
414 		acerhdf_revert_to_bios_mode();
415 	else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
416 		acerhdf_enable_kernelmode();
417 
418 	return 0;
419 }
420 
421 static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
422 				 int *temperature)
423 {
424 	*temperature = ACERHDF_TEMP_CRIT;
425 	return 0;
426 }
427 
428 /* bind callback functions to thermalzone */
429 static struct thermal_zone_device_ops acerhdf_dev_ops = {
430 	.should_bind = acerhdf_should_bind,
431 	.get_temp = acerhdf_get_ec_temp,
432 	.change_mode = acerhdf_change_mode,
433 	.get_crit_temp = acerhdf_get_crit_temp,
434 };
435 
436 /*
437  * cooling device callback functions
438  * get maximal fan cooling state
439  */
440 static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
441 				 unsigned long *state)
442 {
443 	*state = 1;
444 
445 	return 0;
446 }
447 
448 static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
449 				 unsigned long *state)
450 {
451 	int err = 0, tmp;
452 
453 	err = acerhdf_get_fanstate(&tmp);
454 	if (err)
455 		return err;
456 
457 	*state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
458 	return 0;
459 }
460 
461 /* change current fan state - is overwritten when running in kernel mode */
462 static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
463 				 unsigned long state)
464 {
465 	int cur_temp, cur_state, err = 0;
466 
467 	if (!kernelmode)
468 		return 0;
469 
470 	err = acerhdf_get_temp(&cur_temp);
471 	if (err) {
472 		pr_err("error reading temperature, hand off control to BIOS\n");
473 		goto err_out;
474 	}
475 
476 	err = acerhdf_get_fanstate(&cur_state);
477 	if (err) {
478 		pr_err("error reading fan state, hand off control to BIOS\n");
479 		goto err_out;
480 	}
481 
482 	if (state == 0) {
483 		if (cur_state == ACERHDF_FAN_AUTO)
484 			acerhdf_change_fanstate(ACERHDF_FAN_OFF);
485 	} else {
486 		if (cur_state == ACERHDF_FAN_OFF)
487 			acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
488 	}
489 	return 0;
490 
491 err_out:
492 	acerhdf_revert_to_bios_mode();
493 	return -EINVAL;
494 }
495 
496 /* bind fan callbacks to fan device */
497 static const struct thermal_cooling_device_ops acerhdf_cooling_ops = {
498 	.get_max_state = acerhdf_get_max_state,
499 	.get_cur_state = acerhdf_get_cur_state,
500 	.set_cur_state = acerhdf_set_cur_state,
501 };
502 
503 /* suspend / resume functionality */
504 static int acerhdf_suspend(struct device *dev)
505 {
506 	if (kernelmode)
507 		acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
508 
509 	if (verbose)
510 		pr_notice("going suspend\n");
511 
512 	return 0;
513 }
514 
515 static int acerhdf_probe(struct platform_device *device)
516 {
517 	return 0;
518 }
519 
520 static const struct dev_pm_ops acerhdf_pm_ops = {
521 	.suspend = acerhdf_suspend,
522 	.freeze  = acerhdf_suspend,
523 };
524 
525 static struct platform_driver acerhdf_driver = {
526 	.driver = {
527 		.name  = "acerhdf",
528 		.pm    = &acerhdf_pm_ops,
529 	},
530 	.probe = acerhdf_probe,
531 };
532 
533 /* check hardware */
534 static int __init acerhdf_check_hardware(void)
535 {
536 	char const *vendor, *version, *product;
537 	const struct bios_settings *bt = NULL;
538 	int found = 0;
539 
540 	/* get BIOS data */
541 	vendor  = dmi_get_system_info(DMI_SYS_VENDOR);
542 	version = dmi_get_system_info(DMI_BIOS_VERSION);
543 	product = dmi_get_system_info(DMI_PRODUCT_NAME);
544 
545 	if (!vendor || !version || !product) {
546 		pr_err("error getting hardware information\n");
547 		return -EINVAL;
548 	}
549 
550 	pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
551 
552 	if (list_supported) {
553 		pr_info("List of supported Manufacturer/Model/BIOS:\n");
554 		pr_info("---------------------------------------------------\n");
555 		for (bt = bios_tbl; bt->vendor[0]; bt++) {
556 			pr_info("%-13s | %-17s | %-10s\n", bt->vendor,
557 				bt->product, bt->version);
558 		}
559 		pr_info("---------------------------------------------------\n");
560 		return -ECANCELED;
561 	}
562 
563 	if (force_bios[0]) {
564 		version = force_bios;
565 		pr_info("forcing BIOS version: %s\n", version);
566 		kernelmode = 0;
567 	}
568 
569 	if (force_product[0]) {
570 		product = force_product;
571 		pr_info("forcing BIOS product: %s\n", product);
572 		kernelmode = 0;
573 	}
574 
575 	if (verbose)
576 		pr_info("BIOS info: %s %s, product: %s\n",
577 			vendor, version, product);
578 
579 	/* search BIOS version and vendor in BIOS settings table */
580 	for (bt = bios_tbl; bt->vendor[0]; bt++) {
581 		/*
582 		 * check if actual hardware BIOS vendor, product and version
583 		 * IDs start with the strings of BIOS table entry
584 		 */
585 		if (strstarts(vendor, bt->vendor) &&
586 		    strstarts(product, bt->product) &&
587 		    strstarts(version, bt->version)) {
588 			found = 1;
589 			break;
590 		}
591 	}
592 
593 	if (!found) {
594 		pr_err("unknown (unsupported) BIOS version %s/%s/%s, please report, aborting!\n",
595 		       vendor, product, version);
596 		return -EINVAL;
597 	}
598 
599 	/* Copy control settings from BIOS table before we free it. */
600 	ctrl_cfg.fanreg = bt->fanreg;
601 	ctrl_cfg.tempreg = bt->tempreg;
602 	memcpy(&ctrl_cfg.cmd, &bt->cmd, sizeof(struct fancmd));
603 	ctrl_cfg.mcmd_enable = bt->mcmd_enable;
604 
605 	/*
606 	 * if started with kernel mode off, prevent the kernel from switching
607 	 * off the fan
608 	 */
609 	if (!kernelmode) {
610 		pr_notice("Fan control off, to enable do:\n");
611 		pr_notice("echo -n \"enabled\" > /sys/class/thermal/thermal_zoneN/mode # N=0,1,2...\n");
612 	}
613 
614 	return 0;
615 }
616 
617 static int __init acerhdf_register_platform(void)
618 {
619 	int err = 0;
620 
621 	err = platform_driver_register(&acerhdf_driver);
622 	if (err)
623 		return err;
624 
625 	acerhdf_dev = platform_device_alloc("acerhdf", PLATFORM_DEVID_NONE);
626 	if (!acerhdf_dev) {
627 		err = -ENOMEM;
628 		goto err_device_alloc;
629 	}
630 	err = platform_device_add(acerhdf_dev);
631 	if (err)
632 		goto err_device_add;
633 
634 	return 0;
635 
636 err_device_add:
637 	platform_device_put(acerhdf_dev);
638 err_device_alloc:
639 	platform_driver_unregister(&acerhdf_driver);
640 	return err;
641 }
642 
643 static void acerhdf_unregister_platform(void)
644 {
645 	platform_device_unregister(acerhdf_dev);
646 	platform_driver_unregister(&acerhdf_driver);
647 }
648 
649 static int __init acerhdf_register_thermal(void)
650 {
651 	int ret;
652 
653 	cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
654 						 &acerhdf_cooling_ops);
655 
656 	if (IS_ERR(cl_dev))
657 		return -EINVAL;
658 
659 	thz_dev = thermal_zone_device_register_with_trips("acerhdf", trips, ARRAY_SIZE(trips),
660 							  NULL, &acerhdf_dev_ops,
661 							  &acerhdf_zone_params, 0,
662 							  (kernelmode) ? interval*1000 : 0);
663 	if (IS_ERR(thz_dev))
664 		return -EINVAL;
665 
666 	if (kernelmode)
667 		ret = thermal_zone_device_enable(thz_dev);
668 	else
669 		ret = thermal_zone_device_disable(thz_dev);
670 	if (ret)
671 		return ret;
672 
673 	return 0;
674 }
675 
676 static void acerhdf_unregister_thermal(void)
677 {
678 	if (cl_dev) {
679 		thermal_cooling_device_unregister(cl_dev);
680 		cl_dev = NULL;
681 	}
682 
683 	if (thz_dev) {
684 		thermal_zone_device_unregister(thz_dev);
685 		thz_dev = NULL;
686 	}
687 }
688 
689 static int __init acerhdf_init(void)
690 {
691 	int err = 0;
692 
693 	err = acerhdf_check_hardware();
694 	if (err)
695 		goto out_err;
696 
697 	err = acerhdf_register_platform();
698 	if (err)
699 		goto out_err;
700 
701 	err = acerhdf_register_thermal();
702 	if (err)
703 		goto err_unreg;
704 
705 	return 0;
706 
707 err_unreg:
708 	acerhdf_unregister_thermal();
709 	acerhdf_unregister_platform();
710 
711 out_err:
712 	return err;
713 }
714 
715 static void __exit acerhdf_exit(void)
716 {
717 	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
718 	acerhdf_unregister_thermal();
719 	acerhdf_unregister_platform();
720 }
721 
722 MODULE_LICENSE("GPL");
723 MODULE_AUTHOR("Peter Kaestle");
724 MODULE_DESCRIPTION("Aspire One temperature and fan driver");
725 MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:");
726 MODULE_ALIAS("dmi:*:*Acer*:pnAO751h*:");
727 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1410*:");
728 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1810*:");
729 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5755G:");
730 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1825PTZ:");
731 MODULE_ALIAS("dmi:*:*Acer*:pnAO521*:");
732 MODULE_ALIAS("dmi:*:*Acer*:pnAO531*:");
733 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5739G:");
734 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*One*753:");
735 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5315:");
736 MODULE_ALIAS("dmi:*:*Acer*:TravelMate*7730G:");
737 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*7551:");
738 MODULE_ALIAS("dmi:*:*Acer*:TM8573T:");
739 MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:");
740 MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:");
741 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnAOA*:");
742 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOA*:");
743 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMU*:");
744 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnENBFT*:");
745 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMA*:");
746 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTVR46*:");
747 MODULE_ALIAS("dmi:*:*Acer*:pnExtensa*5420*:");
748 
749 module_init(acerhdf_init);
750 module_exit(acerhdf_exit);
751 
752 static int interval_set_uint(const char *val, const struct kernel_param *kp)
753 {
754 	int ret;
755 
756 	ret = param_set_uint(val, kp);
757 	if (ret)
758 		return ret;
759 
760 	acerhdf_check_param(thz_dev);
761 
762 	return 0;
763 }
764 
765 static const struct kernel_param_ops interval_ops = {
766 	.set = interval_set_uint,
767 	.get = param_get_uint,
768 };
769 
770 module_param_cb(interval, &interval_ops, &interval, 0000);
771 MODULE_PARM_DESC(interval, "Polling interval of temperature check");
772