1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Driver for the OLPC XO-1.75 Embedded Controller. 4 * 5 * The EC protocol is documented at: 6 * http://wiki.laptop.org/go/XO_1.75_HOST_to_EC_Protocol 7 * 8 * Copyright (C) 2010 One Laptop per Child Foundation. 9 * Copyright (C) 2018 Lubomir Rintel <lkundrak@v3.sk> 10 */ 11 12 #include <linux/completion.h> 13 #include <linux/ctype.h> 14 #include <linux/delay.h> 15 #include <linux/gpio/consumer.h> 16 #include <linux/input.h> 17 #include <linux/kfifo.h> 18 #include <linux/module.h> 19 #include <linux/olpc-ec.h> 20 #include <linux/platform_device.h> 21 #include <linux/power_supply.h> 22 #include <linux/reboot.h> 23 #include <linux/slab.h> 24 #include <linux/spinlock.h> 25 #include <linux/spi/spi.h> 26 27 struct ec_cmd_t { 28 u8 cmd; 29 u8 bytes_returned; 30 }; 31 32 enum ec_chan_t { 33 CHAN_NONE = 0, 34 CHAN_SWITCH, 35 CHAN_CMD_RESP, 36 CHAN_KEYBOARD, 37 CHAN_TOUCHPAD, 38 CHAN_EVENT, 39 CHAN_DEBUG, 40 CHAN_CMD_ERROR, 41 }; 42 43 /* 44 * EC events 45 */ 46 #define EVENT_AC_CHANGE 1 /* AC plugged/unplugged */ 47 #define EVENT_BATTERY_STATUS 2 /* Battery low/full/error/gone */ 48 #define EVENT_BATTERY_CRITICAL 3 /* Battery critical voltage */ 49 #define EVENT_BATTERY_SOC_CHANGE 4 /* 1% SOC Change */ 50 #define EVENT_BATTERY_ERROR 5 /* Abnormal error, query for cause */ 51 #define EVENT_POWER_PRESSED 6 /* Power button was pressed */ 52 #define EVENT_POWER_PRESS_WAKE 7 /* Woken up with a power button */ 53 #define EVENT_TIMED_HOST_WAKE 8 /* Host wake timer */ 54 #define EVENT_OLS_HIGH_LIMIT 9 /* OLS crossed dark threshold */ 55 #define EVENT_OLS_LOW_LIMIT 10 /* OLS crossed light threshold */ 56 57 /* 58 * EC commands 59 * (from http://dev.laptop.org/git/users/rsmith/ec-1.75/tree/ec_cmd.h) 60 */ 61 #define CMD_GET_API_VERSION 0x08 /* out: u8 */ 62 #define CMD_READ_VOLTAGE 0x10 /* out: u16, *9.76/32, mV */ 63 #define CMD_READ_CURRENT 0x11 /* out: s16, *15.625/120, mA */ 64 #define CMD_READ_ACR 0x12 /* out: s16, *6250/15, uAh */ 65 #define CMD_READ_BATT_TEMPERATURE 0x13 /* out: u16, *100/256, deg C */ 66 #define CMD_READ_AMBIENT_TEMPERATURE 0x14 /* unimplemented, no hardware */ 67 #define CMD_READ_BATTERY_STATUS 0x15 /* out: u8, bitmask */ 68 #define CMD_READ_SOC 0x16 /* out: u8, percentage */ 69 #define CMD_READ_GAUGE_ID 0x17 /* out: u8 * 8 */ 70 #define CMD_READ_GAUGE_DATA 0x18 /* in: u8 addr, out: u8 data */ 71 #define CMD_READ_BOARD_ID 0x19 /* out: u16 (platform id) */ 72 #define CMD_READ_BATT_ERR_CODE 0x1f /* out: u8, error bitmask */ 73 #define CMD_SET_DCON_POWER 0x26 /* in: u8 */ 74 #define CMD_RESET_EC 0x28 /* none */ 75 #define CMD_READ_BATTERY_TYPE 0x2c /* out: u8 */ 76 #define CMD_SET_AUTOWAK 0x33 /* out: u8 */ 77 #define CMD_SET_EC_WAKEUP_TIMER 0x36 /* in: u32, out: ? */ 78 #define CMD_READ_EXT_SCI_MASK 0x37 /* ? */ 79 #define CMD_WRITE_EXT_SCI_MASK 0x38 /* ? */ 80 #define CMD_CLEAR_EC_WAKEUP_TIMER 0x39 /* none */ 81 #define CMD_ENABLE_RUNIN_DISCHARGE 0x3B /* none */ 82 #define CMD_DISABLE_RUNIN_DISCHARGE 0x3C /* none */ 83 #define CMD_READ_MPPT_ACTIVE 0x3d /* out: u8 */ 84 #define CMD_READ_MPPT_LIMIT 0x3e /* out: u8 */ 85 #define CMD_SET_MPPT_LIMIT 0x3f /* in: u8 */ 86 #define CMD_DISABLE_MPPT 0x40 /* none */ 87 #define CMD_ENABLE_MPPT 0x41 /* none */ 88 #define CMD_READ_VIN 0x42 /* out: u16 */ 89 #define CMD_EXT_SCI_QUERY 0x43 /* ? */ 90 #define RSP_KEYBOARD_DATA 0x48 /* ? */ 91 #define RSP_TOUCHPAD_DATA 0x49 /* ? */ 92 #define CMD_GET_FW_VERSION 0x4a /* out: u8 * 16 */ 93 #define CMD_POWER_CYCLE 0x4b /* none */ 94 #define CMD_POWER_OFF 0x4c /* none */ 95 #define CMD_RESET_EC_SOFT 0x4d /* none */ 96 #define CMD_READ_GAUGE_U16 0x4e /* ? */ 97 #define CMD_ENABLE_MOUSE 0x4f /* ? */ 98 #define CMD_ECHO 0x52 /* in: u8 * 5, out: u8 * 5 */ 99 #define CMD_GET_FW_DATE 0x53 /* out: u8 * 16 */ 100 #define CMD_GET_FW_USER 0x54 /* out: u8 * 16 */ 101 #define CMD_TURN_OFF_POWER 0x55 /* none (same as 0x4c) */ 102 #define CMD_READ_OLS 0x56 /* out: u16 */ 103 #define CMD_OLS_SMT_LEDON 0x57 /* none */ 104 #define CMD_OLS_SMT_LEDOFF 0x58 /* none */ 105 #define CMD_START_OLS_ASSY 0x59 /* none */ 106 #define CMD_STOP_OLS_ASSY 0x5a /* none */ 107 #define CMD_OLS_SMTTEST_STOP 0x5b /* none */ 108 #define CMD_READ_VIN_SCALED 0x5c /* out: u16 */ 109 #define CMD_READ_BAT_MIN_W 0x5d /* out: u16 */ 110 #define CMD_READ_BAR_MAX_W 0x5e /* out: u16 */ 111 #define CMD_RESET_BAT_MINMAX_W 0x5f /* none */ 112 #define CMD_READ_LOCATION 0x60 /* in: u16 addr, out: u8 data */ 113 #define CMD_WRITE_LOCATION 0x61 /* in: u16 addr, u8 data */ 114 #define CMD_KEYBOARD_CMD 0x62 /* in: u8, out: ? */ 115 #define CMD_TOUCHPAD_CMD 0x63 /* in: u8, out: ? */ 116 #define CMD_GET_FW_HASH 0x64 /* out: u8 * 16 */ 117 #define CMD_SUSPEND_HINT 0x65 /* in: u8 */ 118 #define CMD_ENABLE_WAKE_TIMER 0x66 /* in: u8 */ 119 #define CMD_SET_WAKE_TIMER 0x67 /* in: 32 */ 120 #define CMD_ENABLE_WAKE_AUTORESET 0x68 /* in: u8 */ 121 #define CMD_OLS_SET_LIMITS 0x69 /* in: u16, u16 */ 122 #define CMD_OLS_GET_LIMITS 0x6a /* out: u16, u16 */ 123 #define CMD_OLS_SET_CEILING 0x6b /* in: u16 */ 124 #define CMD_OLS_GET_CEILING 0x6c /* out: u16 */ 125 126 /* 127 * Accepted EC commands, and how many bytes they return. There are plenty 128 * of EC commands that are no longer implemented, or are implemented only on 129 * certain older boards. 130 */ 131 static const struct ec_cmd_t olpc_xo175_ec_cmds[] = { 132 { CMD_GET_API_VERSION, 1 }, 133 { CMD_READ_VOLTAGE, 2 }, 134 { CMD_READ_CURRENT, 2 }, 135 { CMD_READ_ACR, 2 }, 136 { CMD_READ_BATT_TEMPERATURE, 2 }, 137 { CMD_READ_BATTERY_STATUS, 1 }, 138 { CMD_READ_SOC, 1 }, 139 { CMD_READ_GAUGE_ID, 8 }, 140 { CMD_READ_GAUGE_DATA, 1 }, 141 { CMD_READ_BOARD_ID, 2 }, 142 { CMD_READ_BATT_ERR_CODE, 1 }, 143 { CMD_SET_DCON_POWER, 0 }, 144 { CMD_RESET_EC, 0 }, 145 { CMD_READ_BATTERY_TYPE, 1 }, 146 { CMD_ENABLE_RUNIN_DISCHARGE, 0 }, 147 { CMD_DISABLE_RUNIN_DISCHARGE, 0 }, 148 { CMD_READ_MPPT_ACTIVE, 1 }, 149 { CMD_READ_MPPT_LIMIT, 1 }, 150 { CMD_SET_MPPT_LIMIT, 0 }, 151 { CMD_DISABLE_MPPT, 0 }, 152 { CMD_ENABLE_MPPT, 0 }, 153 { CMD_READ_VIN, 2 }, 154 { CMD_GET_FW_VERSION, 16 }, 155 { CMD_POWER_CYCLE, 0 }, 156 { CMD_POWER_OFF, 0 }, 157 { CMD_RESET_EC_SOFT, 0 }, 158 { CMD_ECHO, 5 }, 159 { CMD_GET_FW_DATE, 16 }, 160 { CMD_GET_FW_USER, 16 }, 161 { CMD_TURN_OFF_POWER, 0 }, 162 { CMD_READ_OLS, 2 }, 163 { CMD_OLS_SMT_LEDON, 0 }, 164 { CMD_OLS_SMT_LEDOFF, 0 }, 165 { CMD_START_OLS_ASSY, 0 }, 166 { CMD_STOP_OLS_ASSY, 0 }, 167 { CMD_OLS_SMTTEST_STOP, 0 }, 168 { CMD_READ_VIN_SCALED, 2 }, 169 { CMD_READ_BAT_MIN_W, 2 }, 170 { CMD_READ_BAR_MAX_W, 2 }, 171 { CMD_RESET_BAT_MINMAX_W, 0 }, 172 { CMD_READ_LOCATION, 1 }, 173 { CMD_WRITE_LOCATION, 0 }, 174 { CMD_GET_FW_HASH, 16 }, 175 { CMD_SUSPEND_HINT, 0 }, 176 { CMD_ENABLE_WAKE_TIMER, 0 }, 177 { CMD_SET_WAKE_TIMER, 0 }, 178 { CMD_ENABLE_WAKE_AUTORESET, 0 }, 179 { CMD_OLS_SET_LIMITS, 0 }, 180 { CMD_OLS_GET_LIMITS, 4 }, 181 { CMD_OLS_SET_CEILING, 0 }, 182 { CMD_OLS_GET_CEILING, 2 }, 183 { CMD_READ_EXT_SCI_MASK, 2 }, 184 { CMD_WRITE_EXT_SCI_MASK, 0 }, 185 186 { } 187 }; 188 189 #define EC_MAX_CMD_DATA_LEN 5 190 #define EC_MAX_RESP_LEN 16 191 192 #define LOG_BUF_SIZE 128 193 194 #define PM_WAKEUP_TIME 1000 195 196 #define EC_ALL_EVENTS GENMASK(15, 0) 197 198 enum ec_state_t { 199 CMD_STATE_IDLE = 0, 200 CMD_STATE_WAITING_FOR_SWITCH, 201 CMD_STATE_CMD_IN_TX_FIFO, 202 CMD_STATE_CMD_SENT, 203 CMD_STATE_RESP_RECEIVED, 204 CMD_STATE_ERROR_RECEIVED, 205 }; 206 207 struct olpc_xo175_ec_cmd { 208 u8 command; 209 u8 nr_args; 210 u8 data_len; 211 u8 args[EC_MAX_CMD_DATA_LEN]; 212 }; 213 214 struct olpc_xo175_ec_resp { 215 u8 channel; 216 u8 byte; 217 }; 218 219 struct olpc_xo175_ec { 220 bool suspended; 221 222 /* SPI related stuff. */ 223 struct spi_device *spi; 224 struct spi_transfer xfer; 225 struct spi_message msg; 226 union { 227 struct olpc_xo175_ec_cmd cmd; 228 struct olpc_xo175_ec_resp resp; 229 } tx_buf, rx_buf; 230 231 /* GPIO for the CMD signals. */ 232 struct gpio_desc *gpio_cmd; 233 234 /* Command handling related state. */ 235 spinlock_t cmd_state_lock; 236 int cmd_state; 237 bool cmd_running; 238 struct completion cmd_done; 239 struct olpc_xo175_ec_cmd cmd; 240 u8 resp_data[EC_MAX_RESP_LEN]; 241 int expected_resp_len; 242 int resp_len; 243 244 /* Power button. */ 245 struct input_dev *pwrbtn; 246 247 /* Debug handling. */ 248 char logbuf[LOG_BUF_SIZE]; 249 int logbuf_len; 250 }; 251 252 static struct platform_device *olpc_ec; 253 254 static int olpc_xo175_ec_resp_len(u8 cmd) 255 { 256 const struct ec_cmd_t *p; 257 258 for (p = olpc_xo175_ec_cmds; p->cmd; p++) { 259 if (p->cmd == cmd) 260 return p->bytes_returned; 261 } 262 263 return -EINVAL; 264 } 265 266 static void olpc_xo175_ec_flush_logbuf(struct olpc_xo175_ec *priv) 267 { 268 dev_dbg(&priv->spi->dev, "got debug string [%*pE]\n", 269 priv->logbuf_len, priv->logbuf); 270 priv->logbuf_len = 0; 271 } 272 273 static void olpc_xo175_ec_complete(void *arg); 274 275 static void olpc_xo175_ec_send_command(struct olpc_xo175_ec *priv, void *cmd, 276 size_t cmdlen) 277 { 278 int ret; 279 280 memcpy(&priv->tx_buf, cmd, cmdlen); 281 priv->xfer.len = cmdlen; 282 283 spi_message_init_with_transfers(&priv->msg, &priv->xfer, 1); 284 285 priv->msg.complete = olpc_xo175_ec_complete; 286 priv->msg.context = priv; 287 288 ret = spi_async(priv->spi, &priv->msg); 289 if (ret) 290 dev_err(&priv->spi->dev, "spi_async() failed %d\n", ret); 291 } 292 293 static void olpc_xo175_ec_read_packet(struct olpc_xo175_ec *priv) 294 { 295 u8 nonce[] = {0xA5, 0x5A}; 296 297 olpc_xo175_ec_send_command(priv, nonce, sizeof(nonce)); 298 } 299 300 static void olpc_xo175_ec_complete(void *arg) 301 { 302 struct olpc_xo175_ec *priv = arg; 303 struct device *dev = &priv->spi->dev; 304 struct power_supply *psy; 305 unsigned long flags; 306 u8 channel; 307 u8 byte; 308 int ret; 309 310 ret = priv->msg.status; 311 if (ret) { 312 dev_err(dev, "SPI transfer failed: %d\n", ret); 313 314 spin_lock_irqsave(&priv->cmd_state_lock, flags); 315 if (priv->cmd_running) { 316 priv->resp_len = 0; 317 priv->cmd_state = CMD_STATE_ERROR_RECEIVED; 318 complete(&priv->cmd_done); 319 } 320 spin_unlock_irqrestore(&priv->cmd_state_lock, flags); 321 322 if (ret != -EINTR) 323 olpc_xo175_ec_read_packet(priv); 324 325 return; 326 } 327 328 channel = priv->rx_buf.resp.channel; 329 byte = priv->rx_buf.resp.byte; 330 331 switch (channel) { 332 case CHAN_NONE: 333 spin_lock_irqsave(&priv->cmd_state_lock, flags); 334 335 if (!priv->cmd_running) { 336 /* We can safely ignore these */ 337 dev_err(dev, "spurious FIFO read packet\n"); 338 spin_unlock_irqrestore(&priv->cmd_state_lock, flags); 339 return; 340 } 341 342 priv->cmd_state = CMD_STATE_CMD_SENT; 343 if (!priv->expected_resp_len) 344 complete(&priv->cmd_done); 345 olpc_xo175_ec_read_packet(priv); 346 347 spin_unlock_irqrestore(&priv->cmd_state_lock, flags); 348 return; 349 350 case CHAN_SWITCH: 351 spin_lock_irqsave(&priv->cmd_state_lock, flags); 352 353 if (!priv->cmd_running) { 354 /* Just go with the flow */ 355 dev_err(dev, "spurious SWITCH packet\n"); 356 memset(&priv->cmd, 0, sizeof(priv->cmd)); 357 priv->cmd.command = CMD_ECHO; 358 } 359 360 priv->cmd_state = CMD_STATE_CMD_IN_TX_FIFO; 361 362 /* Throw command into TxFIFO */ 363 gpiod_set_value_cansleep(priv->gpio_cmd, 0); 364 olpc_xo175_ec_send_command(priv, &priv->cmd, sizeof(priv->cmd)); 365 366 spin_unlock_irqrestore(&priv->cmd_state_lock, flags); 367 return; 368 369 case CHAN_CMD_RESP: 370 spin_lock_irqsave(&priv->cmd_state_lock, flags); 371 372 if (!priv->cmd_running) { 373 dev_err(dev, "spurious response packet\n"); 374 } else if (priv->resp_len >= priv->expected_resp_len) { 375 dev_err(dev, "too many response packets\n"); 376 } else { 377 priv->resp_data[priv->resp_len++] = byte; 378 if (priv->resp_len == priv->expected_resp_len) { 379 priv->cmd_state = CMD_STATE_RESP_RECEIVED; 380 complete(&priv->cmd_done); 381 } 382 } 383 384 spin_unlock_irqrestore(&priv->cmd_state_lock, flags); 385 break; 386 387 case CHAN_CMD_ERROR: 388 spin_lock_irqsave(&priv->cmd_state_lock, flags); 389 390 if (!priv->cmd_running) { 391 dev_err(dev, "spurious cmd error packet\n"); 392 } else { 393 priv->resp_data[0] = byte; 394 priv->resp_len = 1; 395 priv->cmd_state = CMD_STATE_ERROR_RECEIVED; 396 complete(&priv->cmd_done); 397 } 398 spin_unlock_irqrestore(&priv->cmd_state_lock, flags); 399 break; 400 401 case CHAN_KEYBOARD: 402 dev_warn(dev, "keyboard is not supported\n"); 403 break; 404 405 case CHAN_TOUCHPAD: 406 dev_warn(dev, "touchpad is not supported\n"); 407 break; 408 409 case CHAN_EVENT: 410 dev_dbg(dev, "got event %.2x\n", byte); 411 switch (byte) { 412 case EVENT_AC_CHANGE: 413 psy = power_supply_get_by_name("olpc_ac"); 414 if (psy) { 415 power_supply_changed(psy); 416 power_supply_put(psy); 417 } 418 break; 419 case EVENT_BATTERY_STATUS: 420 case EVENT_BATTERY_CRITICAL: 421 case EVENT_BATTERY_SOC_CHANGE: 422 case EVENT_BATTERY_ERROR: 423 psy = power_supply_get_by_name("olpc_battery"); 424 if (psy) { 425 power_supply_changed(psy); 426 power_supply_put(psy); 427 } 428 break; 429 case EVENT_POWER_PRESSED: 430 input_report_key(priv->pwrbtn, KEY_POWER, 1); 431 input_sync(priv->pwrbtn); 432 input_report_key(priv->pwrbtn, KEY_POWER, 0); 433 input_sync(priv->pwrbtn); 434 fallthrough; 435 case EVENT_POWER_PRESS_WAKE: 436 case EVENT_TIMED_HOST_WAKE: 437 pm_wakeup_event(priv->pwrbtn->dev.parent, 438 PM_WAKEUP_TIME); 439 break; 440 default: 441 dev_dbg(dev, "ignored unknown event %.2x\n", byte); 442 break; 443 } 444 break; 445 446 case CHAN_DEBUG: 447 if (byte == '\n') { 448 olpc_xo175_ec_flush_logbuf(priv); 449 } else if (isprint(byte)) { 450 priv->logbuf[priv->logbuf_len++] = byte; 451 if (priv->logbuf_len == LOG_BUF_SIZE) 452 olpc_xo175_ec_flush_logbuf(priv); 453 } 454 break; 455 456 default: 457 dev_warn(dev, "unknown channel: %d, %.2x\n", channel, byte); 458 break; 459 } 460 461 /* Most non-command packets get the TxFIFO refilled and an ACK. */ 462 olpc_xo175_ec_read_packet(priv); 463 } 464 465 /* 466 * This function is protected with a mutex. We can safely assume that 467 * there will be only one instance of this function running at a time. 468 * One of the ways in which we enforce this is by waiting until we get 469 * all response bytes back from the EC, rather than just the number that 470 * the caller requests (otherwise, we might start a new command while an 471 * old command's response bytes are still incoming). 472 */ 473 static int olpc_xo175_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *resp, 474 size_t resp_len, void *ec_cb_arg) 475 { 476 struct olpc_xo175_ec *priv = ec_cb_arg; 477 struct device *dev = &priv->spi->dev; 478 unsigned long flags; 479 size_t nr_bytes; 480 int ret = 0; 481 482 dev_dbg(dev, "CMD %x, %zd bytes expected\n", cmd, resp_len); 483 484 if (inlen > 5) { 485 dev_err(dev, "command len %zd too big!\n", resp_len); 486 return -EOVERFLOW; 487 } 488 489 /* Suspending in the middle of an EC command hoses things badly! */ 490 if (WARN_ON(priv->suspended)) 491 return -EBUSY; 492 493 /* Ensure a valid command and return bytes */ 494 ret = olpc_xo175_ec_resp_len(cmd); 495 if (ret < 0) { 496 dev_err_ratelimited(dev, "unknown command 0x%x\n", cmd); 497 498 /* 499 * Assume the best in our callers, and allow unknown commands 500 * through. I'm not the charitable type, but it was beaten 501 * into me. Just maintain a minimum standard of sanity. 502 */ 503 if (resp_len > sizeof(priv->resp_data)) { 504 dev_err(dev, "response too big: %zd!\n", resp_len); 505 return -EOVERFLOW; 506 } 507 nr_bytes = resp_len; 508 } else { 509 nr_bytes = (size_t)ret; 510 ret = 0; 511 } 512 resp_len = min(resp_len, nr_bytes); 513 514 spin_lock_irqsave(&priv->cmd_state_lock, flags); 515 516 /* Initialize the state machine */ 517 init_completion(&priv->cmd_done); 518 priv->cmd_running = true; 519 priv->cmd_state = CMD_STATE_WAITING_FOR_SWITCH; 520 memset(&priv->cmd, 0, sizeof(priv->cmd)); 521 priv->cmd.command = cmd; 522 priv->cmd.nr_args = inlen; 523 priv->cmd.data_len = 0; 524 memcpy(priv->cmd.args, inbuf, inlen); 525 priv->expected_resp_len = nr_bytes; 526 priv->resp_len = 0; 527 528 /* Tickle the cmd gpio to get things started */ 529 gpiod_set_value_cansleep(priv->gpio_cmd, 1); 530 531 spin_unlock_irqrestore(&priv->cmd_state_lock, flags); 532 533 /* The irq handler should do the rest */ 534 if (!wait_for_completion_timeout(&priv->cmd_done, 535 msecs_to_jiffies(4000))) { 536 dev_err(dev, "EC cmd error: timeout in STATE %d\n", 537 priv->cmd_state); 538 gpiod_set_value_cansleep(priv->gpio_cmd, 0); 539 spi_target_abort(priv->spi); 540 olpc_xo175_ec_read_packet(priv); 541 return -ETIMEDOUT; 542 } 543 544 spin_lock_irqsave(&priv->cmd_state_lock, flags); 545 546 /* Deal with the results. */ 547 if (priv->cmd_state == CMD_STATE_ERROR_RECEIVED) { 548 /* EC-provided error is in the single response byte */ 549 dev_err(dev, "command 0x%x returned error 0x%x\n", 550 cmd, priv->resp_data[0]); 551 ret = -EREMOTEIO; 552 } else if (priv->resp_len != nr_bytes) { 553 dev_err(dev, "command 0x%x returned %d bytes, expected %zd bytes\n", 554 cmd, priv->resp_len, nr_bytes); 555 ret = -EREMOTEIO; 556 } else { 557 /* 558 * We may have 8 bytes in priv->resp, but we only care about 559 * what we've been asked for. If the caller asked for only 2 560 * bytes, give them that. We've guaranteed that 561 * resp_len <= priv->resp_len and priv->resp_len == nr_bytes. 562 */ 563 memcpy(resp, priv->resp_data, resp_len); 564 } 565 566 /* This should already be low, but just in case. */ 567 gpiod_set_value_cansleep(priv->gpio_cmd, 0); 568 priv->cmd_running = false; 569 570 spin_unlock_irqrestore(&priv->cmd_state_lock, flags); 571 572 return ret; 573 } 574 575 static int olpc_xo175_ec_set_event_mask(unsigned int mask) 576 { 577 u8 args[2]; 578 579 args[0] = mask >> 0; 580 args[1] = mask >> 8; 581 return olpc_ec_cmd(CMD_WRITE_EXT_SCI_MASK, args, 2, NULL, 0); 582 } 583 584 static void olpc_xo175_ec_power_off(void) 585 { 586 while (1) { 587 olpc_ec_cmd(CMD_POWER_OFF, NULL, 0, NULL, 0); 588 mdelay(1000); 589 } 590 } 591 592 static int __maybe_unused olpc_xo175_ec_suspend(struct device *dev) 593 { 594 struct olpc_xo175_ec *priv = dev_get_drvdata(dev); 595 static struct { 596 u8 suspend; 597 u32 suspend_count; 598 } __packed hintargs; 599 static unsigned int suspend_count; 600 601 /* 602 * SOC_SLEEP is not wired to the EC on B3 and earlier boards. 603 * This command lets the EC know instead. The suspend count doesn't seem 604 * to be used anywhere but in the EC debug output. 605 */ 606 hintargs.suspend = 1; 607 hintargs.suspend_count = suspend_count++; 608 olpc_ec_cmd(CMD_SUSPEND_HINT, (void *)&hintargs, sizeof(hintargs), 609 NULL, 0); 610 611 /* 612 * After we've sent the suspend hint, don't allow further EC commands 613 * to be run until we've resumed. Userspace tasks should be frozen, 614 * but kernel threads and interrupts could still schedule EC commands. 615 */ 616 priv->suspended = true; 617 618 return 0; 619 } 620 621 static int __maybe_unused olpc_xo175_ec_resume_noirq(struct device *dev) 622 { 623 struct olpc_xo175_ec *priv = dev_get_drvdata(dev); 624 625 priv->suspended = false; 626 627 return 0; 628 } 629 630 static int __maybe_unused olpc_xo175_ec_resume(struct device *dev) 631 { 632 u8 x = 0; 633 634 /* 635 * The resume hint is only needed if no other commands are 636 * being sent during resume. all it does is tell the EC 637 * the SoC is definitely awake. 638 */ 639 olpc_ec_cmd(CMD_SUSPEND_HINT, &x, 1, NULL, 0); 640 641 /* Enable all EC events while we're awake */ 642 olpc_xo175_ec_set_event_mask(EC_ALL_EVENTS); 643 644 return 0; 645 } 646 647 static struct olpc_ec_driver olpc_xo175_ec_driver = { 648 .ec_cmd = olpc_xo175_ec_cmd, 649 }; 650 651 static void olpc_xo175_ec_remove(struct spi_device *spi) 652 { 653 if (pm_power_off == olpc_xo175_ec_power_off) 654 pm_power_off = NULL; 655 656 spi_target_abort(spi); 657 658 platform_device_unregister(olpc_ec); 659 olpc_ec = NULL; 660 } 661 662 static int olpc_xo175_ec_probe(struct spi_device *spi) 663 { 664 struct olpc_xo175_ec *priv; 665 int ret; 666 667 if (olpc_ec) { 668 dev_err(&spi->dev, "OLPC EC already registered.\n"); 669 return -EBUSY; 670 } 671 672 priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL); 673 if (!priv) 674 return -ENOMEM; 675 676 priv->gpio_cmd = devm_gpiod_get(&spi->dev, "cmd", GPIOD_OUT_LOW); 677 if (IS_ERR(priv->gpio_cmd)) { 678 dev_err(&spi->dev, "failed to get cmd gpio: %ld\n", 679 PTR_ERR(priv->gpio_cmd)); 680 return PTR_ERR(priv->gpio_cmd); 681 } 682 683 priv->spi = spi; 684 685 spin_lock_init(&priv->cmd_state_lock); 686 priv->cmd_state = CMD_STATE_IDLE; 687 init_completion(&priv->cmd_done); 688 689 priv->logbuf_len = 0; 690 691 /* Set up power button input device */ 692 priv->pwrbtn = devm_input_allocate_device(&spi->dev); 693 if (!priv->pwrbtn) 694 return -ENOMEM; 695 priv->pwrbtn->name = "Power Button"; 696 priv->pwrbtn->dev.parent = &spi->dev; 697 input_set_capability(priv->pwrbtn, EV_KEY, KEY_POWER); 698 ret = input_register_device(priv->pwrbtn); 699 if (ret) { 700 dev_err(&spi->dev, "error registering input device: %d\n", ret); 701 return ret; 702 } 703 704 spi_set_drvdata(spi, priv); 705 706 priv->xfer.rx_buf = &priv->rx_buf; 707 priv->xfer.tx_buf = &priv->tx_buf; 708 709 olpc_xo175_ec_read_packet(priv); 710 711 olpc_ec_driver_register(&olpc_xo175_ec_driver, priv); 712 olpc_ec = platform_device_register_resndata(&spi->dev, "olpc-ec", -1, 713 NULL, 0, NULL, 0); 714 715 /* Enable all EC events while we're awake */ 716 olpc_xo175_ec_set_event_mask(EC_ALL_EVENTS); 717 718 if (pm_power_off == NULL) 719 pm_power_off = olpc_xo175_ec_power_off; 720 721 dev_info(&spi->dev, "OLPC XO-1.75 Embedded Controller driver\n"); 722 723 return 0; 724 } 725 726 static const struct dev_pm_ops olpc_xo175_ec_pm_ops = { 727 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, olpc_xo175_ec_resume_noirq) 728 SET_RUNTIME_PM_OPS(olpc_xo175_ec_suspend, olpc_xo175_ec_resume, NULL) 729 }; 730 731 static const struct of_device_id olpc_xo175_ec_of_match[] = { 732 { .compatible = "olpc,xo1.75-ec" }, 733 { } 734 }; 735 MODULE_DEVICE_TABLE(of, olpc_xo175_ec_of_match); 736 737 static const struct spi_device_id olpc_xo175_ec_id_table[] = { 738 { "xo1.75-ec", 0 }, 739 {} 740 }; 741 MODULE_DEVICE_TABLE(spi, olpc_xo175_ec_id_table); 742 743 static struct spi_driver olpc_xo175_ec_spi_driver = { 744 .driver = { 745 .name = "olpc-xo175-ec", 746 .of_match_table = olpc_xo175_ec_of_match, 747 .pm = &olpc_xo175_ec_pm_ops, 748 }, 749 .id_table = olpc_xo175_ec_id_table, 750 .probe = olpc_xo175_ec_probe, 751 .remove = olpc_xo175_ec_remove, 752 }; 753 module_spi_driver(olpc_xo175_ec_spi_driver); 754 755 MODULE_DESCRIPTION("OLPC XO-1.75 Embedded Controller driver"); 756 MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>"); /* Functionality */ 757 MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); /* Bugs */ 758 MODULE_LICENSE("GPL"); 759