xref: /linux/drivers/pinctrl/tegra/pinctrl-tegra.h (revision e58e871becec2d3b04ed91c0c16fe8deac9c9dfa)
1 /*
2  * Driver for the NVIDIA Tegra pinmux
3  *
4  * Copyright (c) 2011, NVIDIA CORPORATION.  All rights reserved.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  */
15 
16 #ifndef __PINMUX_TEGRA_H__
17 #define __PINMUX_TEGRA_H__
18 
19 enum tegra_pinconf_param {
20 	/* argument: tegra_pinconf_pull */
21 	TEGRA_PINCONF_PARAM_PULL,
22 	/* argument: tegra_pinconf_tristate */
23 	TEGRA_PINCONF_PARAM_TRISTATE,
24 	/* argument: Boolean */
25 	TEGRA_PINCONF_PARAM_ENABLE_INPUT,
26 	/* argument: Boolean */
27 	TEGRA_PINCONF_PARAM_OPEN_DRAIN,
28 	/* argument: Boolean */
29 	TEGRA_PINCONF_PARAM_LOCK,
30 	/* argument: Boolean */
31 	TEGRA_PINCONF_PARAM_IORESET,
32 	/* argument: Boolean */
33 	TEGRA_PINCONF_PARAM_RCV_SEL,
34 	/* argument: Boolean */
35 	TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE,
36 	/* argument: Boolean */
37 	TEGRA_PINCONF_PARAM_SCHMITT,
38 	/* argument: Boolean */
39 	TEGRA_PINCONF_PARAM_LOW_POWER_MODE,
40 	/* argument: Integer, range is HW-dependant */
41 	TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH,
42 	/* argument: Integer, range is HW-dependant */
43 	TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH,
44 	/* argument: Integer, range is HW-dependant */
45 	TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING,
46 	/* argument: Integer, range is HW-dependant */
47 	TEGRA_PINCONF_PARAM_SLEW_RATE_RISING,
48 	/* argument: Integer, range is HW-dependant */
49 	TEGRA_PINCONF_PARAM_DRIVE_TYPE,
50 };
51 
52 enum tegra_pinconf_pull {
53 	TEGRA_PINCONFIG_PULL_NONE,
54 	TEGRA_PINCONFIG_PULL_DOWN,
55 	TEGRA_PINCONFIG_PULL_UP,
56 };
57 
58 enum tegra_pinconf_tristate {
59 	TEGRA_PINCONFIG_DRIVEN,
60 	TEGRA_PINCONFIG_TRISTATE,
61 };
62 
63 #define TEGRA_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
64 #define TEGRA_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
65 #define TEGRA_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
66 
67 /**
68  * struct tegra_function - Tegra pinctrl mux function
69  * @name: The name of the function, exported to pinctrl core.
70  * @groups: An array of pin groups that may select this function.
71  * @ngroups: The number of entries in @groups.
72  */
73 struct tegra_function {
74 	const char *name;
75 	const char **groups;
76 	unsigned ngroups;
77 };
78 
79 /**
80  * struct tegra_pingroup - Tegra pin group
81  * @name		The name of the pin group.
82  * @pins		An array of pin IDs included in this pin group.
83  * @npins		The number of entries in @pins.
84  * @funcs		The mux functions which can be muxed onto this group.
85  * @mux_reg:		Mux register offset.
86  *			This register contains the mux, einput, odrain, lock,
87  *			ioreset, rcv_sel parameters.
88  * @mux_bank:		Mux register bank.
89  * @mux_bit:		Mux register bit.
90  * @pupd_reg:		Pull-up/down register offset.
91  * @pupd_bank:		Pull-up/down register bank.
92  * @pupd_bit:		Pull-up/down register bit.
93  * @tri_reg:		Tri-state register offset.
94  * @tri_bank:		Tri-state register bank.
95  * @tri_bit:		Tri-state register bit.
96  * @parked_bit:		Parked register bit. -1 if unsupported.
97  * @einput_bit:		Enable-input register bit.
98  * @odrain_bit:		Open-drain register bit.
99  * @lock_bit:		Lock register bit.
100  * @ioreset_bit:	IO reset register bit.
101  * @rcv_sel_bit:	Receiver select bit.
102  * @drv_reg:		Drive fields register offset.
103  *			This register contains hsm, schmitt, lpmd, drvdn,
104  *			drvup, slwr, slwf, and drvtype parameters.
105  * @drv_bank:		Drive fields register bank.
106  * @hsm_bit:		High Speed Mode register bit.
107  * @schmitt_bit:	Scmitt register bit.
108  * @lpmd_bit:		Low Power Mode register bit.
109  * @drvdn_bit:		Drive Down register bit.
110  * @drvdn_width:	Drive Down field width.
111  * @drvup_bit:		Drive Up register bit.
112  * @drvup_width:	Drive Up field width.
113  * @slwr_bit:		Slew Rising register bit.
114  * @slwr_width:		Slew Rising field width.
115  * @slwf_bit:		Slew Falling register bit.
116  * @slwf_width:		Slew Falling field width.
117  * @drvtype_bit:	Drive type register bit.
118  *
119  * -1 in a *_reg field means that feature is unsupported for this group.
120  * *_bank and *_reg values are irrelevant when *_reg is -1.
121  * When *_reg is valid, *_bit may be -1 to indicate an unsupported feature.
122  *
123  * A representation of a group of pins (possibly just one pin) in the Tegra
124  * pin controller. Each group allows some parameter or parameters to be
125  * configured. The most common is mux function selection. Many others exist
126  * such as pull-up/down, tri-state, etc. Tegra's pin controller is complex;
127  * certain groups may only support configuring certain parameters, hence
128  * each parameter is optional.
129  */
130 struct tegra_pingroup {
131 	const char *name;
132 	const unsigned *pins;
133 	u8 npins;
134 	u8 funcs[4];
135 	s16 mux_reg;
136 	s16 pupd_reg;
137 	s16 tri_reg;
138 	s16 drv_reg;
139 	u32 mux_bank:2;
140 	u32 pupd_bank:2;
141 	u32 tri_bank:2;
142 	u32 drv_bank:2;
143 	s32 mux_bit:6;
144 	s32 pupd_bit:6;
145 	s32 tri_bit:6;
146 	s32 parked_bit:6;
147 	s32 einput_bit:6;
148 	s32 odrain_bit:6;
149 	s32 lock_bit:6;
150 	s32 ioreset_bit:6;
151 	s32 rcv_sel_bit:6;
152 	s32 hsm_bit:6;
153 	s32 schmitt_bit:6;
154 	s32 lpmd_bit:6;
155 	s32 drvdn_bit:6;
156 	s32 drvup_bit:6;
157 	s32 slwr_bit:6;
158 	s32 slwf_bit:6;
159 	s32 drvtype_bit:6;
160 	s32 drvdn_width:6;
161 	s32 drvup_width:6;
162 	s32 slwr_width:6;
163 	s32 slwf_width:6;
164 };
165 
166 /**
167  * struct tegra_pinctrl_soc_data - Tegra pin controller driver configuration
168  * @ngpios:	The number of GPIO pins the pin controller HW affects.
169  * @pins:	An array describing all pins the pin controller affects.
170  *		All pins which are also GPIOs must be listed first within the
171  *		array, and be numbered identically to the GPIO controller's
172  *		numbering.
173  * @npins:	The numbmer of entries in @pins.
174  * @functions:	An array describing all mux functions the SoC supports.
175  * @nfunctions:	The numbmer of entries in @functions.
176  * @groups:	An array describing all pin groups the pin SoC supports.
177  * @ngroups:	The numbmer of entries in @groups.
178  */
179 struct tegra_pinctrl_soc_data {
180 	unsigned ngpios;
181 	const struct pinctrl_pin_desc *pins;
182 	unsigned npins;
183 	struct tegra_function *functions;
184 	unsigned nfunctions;
185 	const struct tegra_pingroup *groups;
186 	unsigned ngroups;
187 	bool hsm_in_mux;
188 	bool schmitt_in_mux;
189 	bool drvtype_in_mux;
190 };
191 
192 int tegra_pinctrl_probe(struct platform_device *pdev,
193 			const struct tegra_pinctrl_soc_data *soc_data);
194 #endif
195