xref: /linux/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c (revision 02680c23d7b3febe45ea3d4f9818c2b2dc89020a)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (c) 2015, Sony Mobile Communications AB.
4  * Copyright (c) 2013, The Linux Foundation. All rights reserved.
5  */
6 
7 #include <linux/module.h>
8 #include <linux/platform_device.h>
9 #include <linux/pinctrl/pinctrl.h>
10 #include <linux/pinctrl/pinmux.h>
11 #include <linux/pinctrl/pinconf.h>
12 #include <linux/pinctrl/pinconf-generic.h>
13 #include <linux/slab.h>
14 #include <linux/regmap.h>
15 #include <linux/gpio/driver.h>
16 #include <linux/interrupt.h>
17 #include <linux/of_device.h>
18 #include <linux/of_irq.h>
19 
20 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
21 
22 #include "../core.h"
23 #include "../pinctrl-utils.h"
24 
25 /* MPP registers */
26 #define SSBI_REG_ADDR_MPP_BASE		0x50
27 #define SSBI_REG_ADDR_MPP(n)		(SSBI_REG_ADDR_MPP_BASE + n)
28 
29 /* MPP Type: type */
30 #define PM8XXX_MPP_TYPE_D_INPUT         0
31 #define PM8XXX_MPP_TYPE_D_OUTPUT        1
32 #define PM8XXX_MPP_TYPE_D_BI_DIR        2
33 #define PM8XXX_MPP_TYPE_A_INPUT         3
34 #define PM8XXX_MPP_TYPE_A_OUTPUT        4
35 #define PM8XXX_MPP_TYPE_SINK            5
36 #define PM8XXX_MPP_TYPE_DTEST_SINK      6
37 #define PM8XXX_MPP_TYPE_DTEST_OUTPUT    7
38 
39 /* Digital Input: control */
40 #define PM8XXX_MPP_DIN_TO_INT           0
41 #define PM8XXX_MPP_DIN_TO_DBUS1         1
42 #define PM8XXX_MPP_DIN_TO_DBUS2         2
43 #define PM8XXX_MPP_DIN_TO_DBUS3         3
44 
45 /* Digital Output: control */
46 #define PM8XXX_MPP_DOUT_CTRL_LOW        0
47 #define PM8XXX_MPP_DOUT_CTRL_HIGH       1
48 #define PM8XXX_MPP_DOUT_CTRL_MPP        2
49 #define PM8XXX_MPP_DOUT_CTRL_INV_MPP    3
50 
51 /* Bidirectional: control */
52 #define PM8XXX_MPP_BI_PULLUP_1KOHM      0
53 #define PM8XXX_MPP_BI_PULLUP_OPEN       1
54 #define PM8XXX_MPP_BI_PULLUP_10KOHM     2
55 #define PM8XXX_MPP_BI_PULLUP_30KOHM     3
56 
57 /* Analog Output: control */
58 #define PM8XXX_MPP_AOUT_CTRL_DISABLE            0
59 #define PM8XXX_MPP_AOUT_CTRL_ENABLE             1
60 #define PM8XXX_MPP_AOUT_CTRL_MPP_HIGH_EN        2
61 #define PM8XXX_MPP_AOUT_CTRL_MPP_LOW_EN         3
62 
63 /* Current Sink: control */
64 #define PM8XXX_MPP_CS_CTRL_DISABLE      0
65 #define PM8XXX_MPP_CS_CTRL_ENABLE       1
66 #define PM8XXX_MPP_CS_CTRL_MPP_HIGH_EN  2
67 #define PM8XXX_MPP_CS_CTRL_MPP_LOW_EN   3
68 
69 /* DTEST Current Sink: control */
70 #define PM8XXX_MPP_DTEST_CS_CTRL_EN1    0
71 #define PM8XXX_MPP_DTEST_CS_CTRL_EN2    1
72 #define PM8XXX_MPP_DTEST_CS_CTRL_EN3    2
73 #define PM8XXX_MPP_DTEST_CS_CTRL_EN4    3
74 
75 /* DTEST Digital Output: control */
76 #define PM8XXX_MPP_DTEST_DBUS1          0
77 #define PM8XXX_MPP_DTEST_DBUS2          1
78 #define PM8XXX_MPP_DTEST_DBUS3          2
79 #define PM8XXX_MPP_DTEST_DBUS4          3
80 
81 /* custom pinconf parameters */
82 #define PM8XXX_CONFIG_AMUX		(PIN_CONFIG_END + 1)
83 #define PM8XXX_CONFIG_DTEST_SELECTOR	(PIN_CONFIG_END + 2)
84 #define PM8XXX_CONFIG_ALEVEL		(PIN_CONFIG_END + 3)
85 #define PM8XXX_CONFIG_PAIRED		(PIN_CONFIG_END + 4)
86 
87 /**
88  * struct pm8xxx_pin_data - dynamic configuration for a pin
89  * @reg:		address of the control register
90  * @irq:		IRQ from the PMIC interrupt controller
91  * @mode:		operating mode for the pin (digital, analog or current sink)
92  * @input:		pin is input
93  * @output:		pin is output
94  * @high_z:		pin is floating
95  * @paired:		mpp operates in paired mode
96  * @output_value:	logical output value of the mpp
97  * @power_source:	selected power source
98  * @dtest:		DTEST route selector
99  * @amux:		input muxing in analog mode
100  * @aout_level:		selector of the output in analog mode
101  * @drive_strength:	drive strength of the current sink
102  * @pullup:		pull up value, when in digital bidirectional mode
103  */
104 struct pm8xxx_pin_data {
105 	unsigned reg;
106 	int irq;
107 
108 	u8 mode;
109 
110 	bool input;
111 	bool output;
112 	bool high_z;
113 	bool paired;
114 	bool output_value;
115 
116 	u8 power_source;
117 	u8 dtest;
118 	u8 amux;
119 	u8 aout_level;
120 	u8 drive_strength;
121 	unsigned pullup;
122 };
123 
124 struct pm8xxx_mpp {
125 	struct device *dev;
126 	struct regmap *regmap;
127 	struct pinctrl_dev *pctrl;
128 	struct gpio_chip chip;
129 
130 	struct pinctrl_desc desc;
131 	unsigned npins;
132 };
133 
134 static const struct pinconf_generic_params pm8xxx_mpp_bindings[] = {
135 	{"qcom,amux-route",	PM8XXX_CONFIG_AMUX,		0},
136 	{"qcom,analog-level",	PM8XXX_CONFIG_ALEVEL,		0},
137 	{"qcom,dtest",		PM8XXX_CONFIG_DTEST_SELECTOR,	0},
138 	{"qcom,paired",		PM8XXX_CONFIG_PAIRED,		0},
139 };
140 
141 #ifdef CONFIG_DEBUG_FS
142 static const struct pin_config_item pm8xxx_conf_items[] = {
143 	PCONFDUMP(PM8XXX_CONFIG_AMUX, "analog mux", NULL, true),
144 	PCONFDUMP(PM8XXX_CONFIG_ALEVEL, "analog level", NULL, true),
145 	PCONFDUMP(PM8XXX_CONFIG_DTEST_SELECTOR, "dtest", NULL, true),
146 	PCONFDUMP(PM8XXX_CONFIG_PAIRED, "paired", NULL, false),
147 };
148 #endif
149 
150 #define PM8XXX_MAX_MPPS	12
151 static const char * const pm8xxx_groups[PM8XXX_MAX_MPPS] = {
152 	"mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp6", "mpp7", "mpp8",
153 	"mpp9", "mpp10", "mpp11", "mpp12",
154 };
155 
156 #define PM8XXX_MPP_DIGITAL	0
157 #define PM8XXX_MPP_ANALOG	1
158 #define PM8XXX_MPP_SINK		2
159 
160 static const char * const pm8xxx_mpp_functions[] = {
161 	"digital", "analog", "sink",
162 };
163 
164 static int pm8xxx_mpp_update(struct pm8xxx_mpp *pctrl,
165 			     struct pm8xxx_pin_data *pin)
166 {
167 	unsigned level;
168 	unsigned ctrl;
169 	unsigned type;
170 	int ret;
171 	u8 val;
172 
173 	switch (pin->mode) {
174 	case PM8XXX_MPP_DIGITAL:
175 		if (pin->dtest) {
176 			type = PM8XXX_MPP_TYPE_DTEST_OUTPUT;
177 			ctrl = pin->dtest - 1;
178 		} else if (pin->input && pin->output) {
179 			type = PM8XXX_MPP_TYPE_D_BI_DIR;
180 			if (pin->high_z)
181 				ctrl = PM8XXX_MPP_BI_PULLUP_OPEN;
182 			else if (pin->pullup == 600)
183 				ctrl = PM8XXX_MPP_BI_PULLUP_1KOHM;
184 			else if (pin->pullup == 10000)
185 				ctrl = PM8XXX_MPP_BI_PULLUP_10KOHM;
186 			else
187 				ctrl = PM8XXX_MPP_BI_PULLUP_30KOHM;
188 		} else if (pin->input) {
189 			type = PM8XXX_MPP_TYPE_D_INPUT;
190 			if (pin->dtest)
191 				ctrl = pin->dtest;
192 			else
193 				ctrl = PM8XXX_MPP_DIN_TO_INT;
194 		} else {
195 			type = PM8XXX_MPP_TYPE_D_OUTPUT;
196 			ctrl = !!pin->output_value;
197 			if (pin->paired)
198 				ctrl |= BIT(1);
199 		}
200 
201 		level = pin->power_source;
202 		break;
203 	case PM8XXX_MPP_ANALOG:
204 		if (pin->output) {
205 			type = PM8XXX_MPP_TYPE_A_OUTPUT;
206 			level = pin->aout_level;
207 			ctrl = pin->output_value;
208 			if (pin->paired)
209 				ctrl |= BIT(1);
210 		} else {
211 			type = PM8XXX_MPP_TYPE_A_INPUT;
212 			level = pin->amux;
213 			ctrl = 0;
214 		}
215 		break;
216 	case PM8XXX_MPP_SINK:
217 		level = (pin->drive_strength / 5) - 1;
218 		if (pin->dtest) {
219 			type = PM8XXX_MPP_TYPE_DTEST_SINK;
220 			ctrl = pin->dtest - 1;
221 		} else {
222 			type = PM8XXX_MPP_TYPE_SINK;
223 			ctrl = pin->output_value;
224 			if (pin->paired)
225 				ctrl |= BIT(1);
226 		}
227 		break;
228 	default:
229 		return -EINVAL;
230 	}
231 
232 	val = type << 5 | level << 2 | ctrl;
233 	ret = regmap_write(pctrl->regmap, pin->reg, val);
234 	if (ret)
235 		dev_err(pctrl->dev, "failed to write register\n");
236 
237 	return ret;
238 }
239 
240 static int pm8xxx_get_groups_count(struct pinctrl_dev *pctldev)
241 {
242 	struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
243 
244 	return pctrl->npins;
245 }
246 
247 static const char *pm8xxx_get_group_name(struct pinctrl_dev *pctldev,
248 					 unsigned group)
249 {
250 	return pm8xxx_groups[group];
251 }
252 
253 
254 static int pm8xxx_get_group_pins(struct pinctrl_dev *pctldev,
255 				 unsigned group,
256 				 const unsigned **pins,
257 				 unsigned *num_pins)
258 {
259 	struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
260 
261 	*pins = &pctrl->desc.pins[group].number;
262 	*num_pins = 1;
263 
264 	return 0;
265 }
266 
267 static const struct pinctrl_ops pm8xxx_pinctrl_ops = {
268 	.get_groups_count	= pm8xxx_get_groups_count,
269 	.get_group_name		= pm8xxx_get_group_name,
270 	.get_group_pins         = pm8xxx_get_group_pins,
271 	.dt_node_to_map		= pinconf_generic_dt_node_to_map_group,
272 	.dt_free_map		= pinctrl_utils_free_map,
273 };
274 
275 static int pm8xxx_get_functions_count(struct pinctrl_dev *pctldev)
276 {
277 	return ARRAY_SIZE(pm8xxx_mpp_functions);
278 }
279 
280 static const char *pm8xxx_get_function_name(struct pinctrl_dev *pctldev,
281 					    unsigned function)
282 {
283 	return pm8xxx_mpp_functions[function];
284 }
285 
286 static int pm8xxx_get_function_groups(struct pinctrl_dev *pctldev,
287 				      unsigned function,
288 				      const char * const **groups,
289 				      unsigned * const num_groups)
290 {
291 	struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
292 
293 	*groups = pm8xxx_groups;
294 	*num_groups = pctrl->npins;
295 	return 0;
296 }
297 
298 static int pm8xxx_pinmux_set_mux(struct pinctrl_dev *pctldev,
299 				 unsigned function,
300 				 unsigned group)
301 {
302 	struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
303 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[group].drv_data;
304 
305 	pin->mode = function;
306 	pm8xxx_mpp_update(pctrl, pin);
307 
308 	return 0;
309 }
310 
311 static const struct pinmux_ops pm8xxx_pinmux_ops = {
312 	.get_functions_count	= pm8xxx_get_functions_count,
313 	.get_function_name	= pm8xxx_get_function_name,
314 	.get_function_groups	= pm8xxx_get_function_groups,
315 	.set_mux		= pm8xxx_pinmux_set_mux,
316 };
317 
318 static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev,
319 				 unsigned int offset,
320 				 unsigned long *config)
321 {
322 	struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
323 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
324 	unsigned param = pinconf_to_config_param(*config);
325 	unsigned arg;
326 
327 	switch (param) {
328 	case PIN_CONFIG_BIAS_PULL_UP:
329 		arg = pin->pullup;
330 		break;
331 	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
332 		arg = pin->high_z;
333 		break;
334 	case PIN_CONFIG_INPUT_ENABLE:
335 		arg = pin->input;
336 		break;
337 	case PIN_CONFIG_OUTPUT:
338 		arg = pin->output_value;
339 		break;
340 	case PIN_CONFIG_POWER_SOURCE:
341 		arg = pin->power_source;
342 		break;
343 	case PIN_CONFIG_DRIVE_STRENGTH:
344 		arg = pin->drive_strength;
345 		break;
346 	case PM8XXX_CONFIG_DTEST_SELECTOR:
347 		arg = pin->dtest;
348 		break;
349 	case PM8XXX_CONFIG_AMUX:
350 		arg = pin->amux;
351 		break;
352 	case PM8XXX_CONFIG_ALEVEL:
353 		arg = pin->aout_level;
354 		break;
355 	case PM8XXX_CONFIG_PAIRED:
356 		arg = pin->paired;
357 		break;
358 	default:
359 		return -EINVAL;
360 	}
361 
362 	*config = pinconf_to_config_packed(param, arg);
363 
364 	return 0;
365 }
366 
367 static int pm8xxx_pin_config_set(struct pinctrl_dev *pctldev,
368 				 unsigned int offset,
369 				 unsigned long *configs,
370 				 unsigned num_configs)
371 {
372 	struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
373 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
374 	unsigned param;
375 	unsigned arg;
376 	unsigned i;
377 
378 	for (i = 0; i < num_configs; i++) {
379 		param = pinconf_to_config_param(configs[i]);
380 		arg = pinconf_to_config_argument(configs[i]);
381 
382 		switch (param) {
383 		case PIN_CONFIG_BIAS_PULL_UP:
384 			pin->pullup = arg;
385 			break;
386 		case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
387 			pin->high_z = true;
388 			break;
389 		case PIN_CONFIG_INPUT_ENABLE:
390 			pin->input = true;
391 			break;
392 		case PIN_CONFIG_OUTPUT:
393 			pin->output = true;
394 			pin->output_value = !!arg;
395 			break;
396 		case PIN_CONFIG_POWER_SOURCE:
397 			pin->power_source = arg;
398 			break;
399 		case PIN_CONFIG_DRIVE_STRENGTH:
400 			pin->drive_strength = arg;
401 			break;
402 		case PM8XXX_CONFIG_DTEST_SELECTOR:
403 			pin->dtest = arg;
404 			break;
405 		case PM8XXX_CONFIG_AMUX:
406 			pin->amux = arg;
407 			break;
408 		case PM8XXX_CONFIG_ALEVEL:
409 			pin->aout_level = arg;
410 			break;
411 		case PM8XXX_CONFIG_PAIRED:
412 			pin->paired = !!arg;
413 			break;
414 		default:
415 			dev_err(pctrl->dev,
416 				"unsupported config parameter: %x\n",
417 				param);
418 			return -EINVAL;
419 		}
420 	}
421 
422 	pm8xxx_mpp_update(pctrl, pin);
423 
424 	return 0;
425 }
426 
427 static const struct pinconf_ops pm8xxx_pinconf_ops = {
428 	.is_generic = true,
429 	.pin_config_group_get = pm8xxx_pin_config_get,
430 	.pin_config_group_set = pm8xxx_pin_config_set,
431 };
432 
433 static const struct pinctrl_desc pm8xxx_pinctrl_desc = {
434 	.name = "pm8xxx_mpp",
435 	.pctlops = &pm8xxx_pinctrl_ops,
436 	.pmxops = &pm8xxx_pinmux_ops,
437 	.confops = &pm8xxx_pinconf_ops,
438 	.owner = THIS_MODULE,
439 };
440 
441 static int pm8xxx_mpp_direction_input(struct gpio_chip *chip,
442 				       unsigned offset)
443 {
444 	struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
445 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
446 
447 	switch (pin->mode) {
448 	case PM8XXX_MPP_DIGITAL:
449 		pin->input = true;
450 		break;
451 	case PM8XXX_MPP_ANALOG:
452 		pin->input = true;
453 		pin->output = true;
454 		break;
455 	case PM8XXX_MPP_SINK:
456 		return -EINVAL;
457 	}
458 
459 	pm8xxx_mpp_update(pctrl, pin);
460 
461 	return 0;
462 }
463 
464 static int pm8xxx_mpp_direction_output(struct gpio_chip *chip,
465 					unsigned offset,
466 					int value)
467 {
468 	struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
469 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
470 
471 	switch (pin->mode) {
472 	case PM8XXX_MPP_DIGITAL:
473 		pin->output = true;
474 		break;
475 	case PM8XXX_MPP_ANALOG:
476 		pin->input = false;
477 		pin->output = true;
478 		break;
479 	case PM8XXX_MPP_SINK:
480 		pin->input = false;
481 		pin->output = true;
482 		break;
483 	}
484 
485 	pm8xxx_mpp_update(pctrl, pin);
486 
487 	return 0;
488 }
489 
490 static int pm8xxx_mpp_get(struct gpio_chip *chip, unsigned offset)
491 {
492 	struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
493 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
494 	bool state;
495 	int ret;
496 
497 	if (!pin->input)
498 		return !!pin->output_value;
499 
500 	ret = irq_get_irqchip_state(pin->irq, IRQCHIP_STATE_LINE_LEVEL, &state);
501 	if (!ret)
502 		ret = !!state;
503 
504 	return ret;
505 }
506 
507 static void pm8xxx_mpp_set(struct gpio_chip *chip, unsigned offset, int value)
508 {
509 	struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
510 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
511 
512 	pin->output_value = !!value;
513 
514 	pm8xxx_mpp_update(pctrl, pin);
515 }
516 
517 static int pm8xxx_mpp_of_xlate(struct gpio_chip *chip,
518 				const struct of_phandle_args *gpio_desc,
519 				u32 *flags)
520 {
521 	if (chip->of_gpio_n_cells < 2)
522 		return -EINVAL;
523 
524 	if (flags)
525 		*flags = gpio_desc->args[1];
526 
527 	return gpio_desc->args[0] - 1;
528 }
529 
530 
531 static int pm8xxx_mpp_to_irq(struct gpio_chip *chip, unsigned offset)
532 {
533 	struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
534 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
535 
536 	return pin->irq;
537 }
538 
539 #ifdef CONFIG_DEBUG_FS
540 #include <linux/seq_file.h>
541 
542 static void pm8xxx_mpp_dbg_show_one(struct seq_file *s,
543 				  struct pinctrl_dev *pctldev,
544 				  struct gpio_chip *chip,
545 				  unsigned offset,
546 				  unsigned gpio)
547 {
548 	struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
549 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
550 
551 	static const char * const aout_lvls[] = {
552 		"1v25", "1v25_2", "0v625", "0v3125", "mpp", "abus1", "abus2",
553 		"abus3"
554 	};
555 
556 	static const char * const amuxs[] = {
557 		"amux5", "amux6", "amux7", "amux8", "amux9", "abus1", "abus2",
558 		"abus3",
559 	};
560 
561 	seq_printf(s, " mpp%-2d:", offset + 1);
562 
563 	switch (pin->mode) {
564 	case PM8XXX_MPP_DIGITAL:
565 		seq_puts(s, " digital ");
566 		if (pin->dtest) {
567 			seq_printf(s, "dtest%d\n", pin->dtest);
568 		} else if (pin->input && pin->output) {
569 			if (pin->high_z)
570 				seq_puts(s, "bi-dir high-z");
571 			else
572 				seq_printf(s, "bi-dir %dOhm", pin->pullup);
573 		} else if (pin->input) {
574 			if (pin->dtest)
575 				seq_printf(s, "in dtest%d", pin->dtest);
576 			else
577 				seq_puts(s, "in gpio");
578 		} else if (pin->output) {
579 			seq_puts(s, "out ");
580 
581 			if (!pin->paired) {
582 				seq_puts(s, pin->output_value ?
583 					 "high" : "low");
584 			} else {
585 				seq_puts(s, pin->output_value ?
586 					 "inverted" : "follow");
587 			}
588 		}
589 		break;
590 	case PM8XXX_MPP_ANALOG:
591 		seq_puts(s, " analog ");
592 		if (pin->output) {
593 			seq_printf(s, "out %s ", aout_lvls[pin->aout_level]);
594 			if (!pin->paired) {
595 				seq_puts(s, pin->output_value ?
596 					 "high" : "low");
597 			} else {
598 				seq_puts(s, pin->output_value ?
599 					 "inverted" : "follow");
600 			}
601 		} else {
602 			seq_printf(s, "input mux %s", amuxs[pin->amux]);
603 		}
604 		break;
605 	case PM8XXX_MPP_SINK:
606 		seq_printf(s, " sink %dmA ", pin->drive_strength);
607 		if (pin->dtest) {
608 			seq_printf(s, "dtest%d", pin->dtest);
609 		} else {
610 			if (!pin->paired) {
611 				seq_puts(s, pin->output_value ?
612 					 "high" : "low");
613 			} else {
614 				seq_puts(s, pin->output_value ?
615 					 "inverted" : "follow");
616 			}
617 		}
618 		break;
619 	}
620 }
621 
622 static void pm8xxx_mpp_dbg_show(struct seq_file *s, struct gpio_chip *chip)
623 {
624 	unsigned gpio = chip->base;
625 	unsigned i;
626 
627 	for (i = 0; i < chip->ngpio; i++, gpio++) {
628 		pm8xxx_mpp_dbg_show_one(s, NULL, chip, i, gpio);
629 		seq_puts(s, "\n");
630 	}
631 }
632 
633 #else
634 #define pm8xxx_mpp_dbg_show NULL
635 #endif
636 
637 static const struct gpio_chip pm8xxx_mpp_template = {
638 	.direction_input = pm8xxx_mpp_direction_input,
639 	.direction_output = pm8xxx_mpp_direction_output,
640 	.get = pm8xxx_mpp_get,
641 	.set = pm8xxx_mpp_set,
642 	.of_xlate = pm8xxx_mpp_of_xlate,
643 	.to_irq = pm8xxx_mpp_to_irq,
644 	.dbg_show = pm8xxx_mpp_dbg_show,
645 	.owner = THIS_MODULE,
646 };
647 
648 static int pm8xxx_pin_populate(struct pm8xxx_mpp *pctrl,
649 			       struct pm8xxx_pin_data *pin)
650 {
651 	unsigned int val;
652 	unsigned level;
653 	unsigned ctrl;
654 	unsigned type;
655 	int ret;
656 
657 	ret = regmap_read(pctrl->regmap, pin->reg, &val);
658 	if (ret) {
659 		dev_err(pctrl->dev, "failed to read register\n");
660 		return ret;
661 	}
662 
663 	type = (val >> 5) & 7;
664 	level = (val >> 2) & 7;
665 	ctrl = (val) & 3;
666 
667 	switch (type) {
668 	case PM8XXX_MPP_TYPE_D_INPUT:
669 		pin->mode = PM8XXX_MPP_DIGITAL;
670 		pin->input = true;
671 		pin->power_source = level;
672 		pin->dtest = ctrl;
673 		break;
674 	case PM8XXX_MPP_TYPE_D_OUTPUT:
675 		pin->mode = PM8XXX_MPP_DIGITAL;
676 		pin->output = true;
677 		pin->power_source = level;
678 		pin->output_value = !!(ctrl & BIT(0));
679 		pin->paired = !!(ctrl & BIT(1));
680 		break;
681 	case PM8XXX_MPP_TYPE_D_BI_DIR:
682 		pin->mode = PM8XXX_MPP_DIGITAL;
683 		pin->input = true;
684 		pin->output = true;
685 		pin->power_source = level;
686 		switch (ctrl) {
687 		case PM8XXX_MPP_BI_PULLUP_1KOHM:
688 			pin->pullup = 600;
689 			break;
690 		case PM8XXX_MPP_BI_PULLUP_OPEN:
691 			pin->high_z = true;
692 			break;
693 		case PM8XXX_MPP_BI_PULLUP_10KOHM:
694 			pin->pullup = 10000;
695 			break;
696 		case PM8XXX_MPP_BI_PULLUP_30KOHM:
697 			pin->pullup = 30000;
698 			break;
699 		}
700 		break;
701 	case PM8XXX_MPP_TYPE_A_INPUT:
702 		pin->mode = PM8XXX_MPP_ANALOG;
703 		pin->input = true;
704 		pin->amux = level;
705 		break;
706 	case PM8XXX_MPP_TYPE_A_OUTPUT:
707 		pin->mode = PM8XXX_MPP_ANALOG;
708 		pin->output = true;
709 		pin->aout_level = level;
710 		pin->output_value = !!(ctrl & BIT(0));
711 		pin->paired = !!(ctrl & BIT(1));
712 		break;
713 	case PM8XXX_MPP_TYPE_SINK:
714 		pin->mode = PM8XXX_MPP_SINK;
715 		pin->drive_strength = 5 * (level + 1);
716 		pin->output_value = !!(ctrl & BIT(0));
717 		pin->paired = !!(ctrl & BIT(1));
718 		break;
719 	case PM8XXX_MPP_TYPE_DTEST_SINK:
720 		pin->mode = PM8XXX_MPP_SINK;
721 		pin->dtest = ctrl + 1;
722 		pin->drive_strength = 5 * (level + 1);
723 		break;
724 	case PM8XXX_MPP_TYPE_DTEST_OUTPUT:
725 		pin->mode = PM8XXX_MPP_DIGITAL;
726 		pin->power_source = level;
727 		if (ctrl >= 1)
728 			pin->dtest = ctrl;
729 		break;
730 	}
731 
732 	return 0;
733 }
734 
735 static const struct of_device_id pm8xxx_mpp_of_match[] = {
736 	{ .compatible = "qcom,pm8018-mpp" },
737 	{ .compatible = "qcom,pm8038-mpp" },
738 	{ .compatible = "qcom,pm8058-mpp" },
739 	{ .compatible = "qcom,pm8917-mpp" },
740 	{ .compatible = "qcom,pm8821-mpp" },
741 	{ .compatible = "qcom,pm8921-mpp" },
742 	{ .compatible = "qcom,ssbi-mpp" },
743 	{ },
744 };
745 MODULE_DEVICE_TABLE(of, pm8xxx_mpp_of_match);
746 
747 static int pm8xxx_mpp_probe(struct platform_device *pdev)
748 {
749 	struct pm8xxx_pin_data *pin_data;
750 	struct pinctrl_pin_desc *pins;
751 	struct pm8xxx_mpp *pctrl;
752 	int ret;
753 	int i, npins;
754 
755 	pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
756 	if (!pctrl)
757 		return -ENOMEM;
758 
759 	pctrl->dev = &pdev->dev;
760 	npins = platform_irq_count(pdev);
761 	if (!npins)
762 		return -EINVAL;
763 	if (npins < 0)
764 		return npins;
765 	pctrl->npins = npins;
766 
767 	pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL);
768 	if (!pctrl->regmap) {
769 		dev_err(&pdev->dev, "parent regmap unavailable\n");
770 		return -ENXIO;
771 	}
772 
773 	pctrl->desc = pm8xxx_pinctrl_desc;
774 	pctrl->desc.npins = pctrl->npins;
775 
776 	pins = devm_kcalloc(&pdev->dev,
777 			    pctrl->desc.npins,
778 			    sizeof(struct pinctrl_pin_desc),
779 			    GFP_KERNEL);
780 	if (!pins)
781 		return -ENOMEM;
782 
783 	pin_data = devm_kcalloc(&pdev->dev,
784 				pctrl->desc.npins,
785 				sizeof(struct pm8xxx_pin_data),
786 				GFP_KERNEL);
787 	if (!pin_data)
788 		return -ENOMEM;
789 
790 	for (i = 0; i < pctrl->desc.npins; i++) {
791 		pin_data[i].reg = SSBI_REG_ADDR_MPP(i);
792 		pin_data[i].irq = platform_get_irq(pdev, i);
793 		if (pin_data[i].irq < 0)
794 			return pin_data[i].irq;
795 
796 		ret = pm8xxx_pin_populate(pctrl, &pin_data[i]);
797 		if (ret)
798 			return ret;
799 
800 		pins[i].number = i;
801 		pins[i].name = pm8xxx_groups[i];
802 		pins[i].drv_data = &pin_data[i];
803 	}
804 	pctrl->desc.pins = pins;
805 
806 	pctrl->desc.num_custom_params = ARRAY_SIZE(pm8xxx_mpp_bindings);
807 	pctrl->desc.custom_params = pm8xxx_mpp_bindings;
808 #ifdef CONFIG_DEBUG_FS
809 	pctrl->desc.custom_conf_items = pm8xxx_conf_items;
810 #endif
811 
812 	pctrl->pctrl = devm_pinctrl_register(&pdev->dev, &pctrl->desc, pctrl);
813 	if (IS_ERR(pctrl->pctrl)) {
814 		dev_err(&pdev->dev, "couldn't register pm8xxx mpp driver\n");
815 		return PTR_ERR(pctrl->pctrl);
816 	}
817 
818 	pctrl->chip = pm8xxx_mpp_template;
819 	pctrl->chip.base = -1;
820 	pctrl->chip.parent = &pdev->dev;
821 	pctrl->chip.of_node = pdev->dev.of_node;
822 	pctrl->chip.of_gpio_n_cells = 2;
823 	pctrl->chip.label = dev_name(pctrl->dev);
824 	pctrl->chip.ngpio = pctrl->npins;
825 	ret = gpiochip_add_data(&pctrl->chip, pctrl);
826 	if (ret) {
827 		dev_err(&pdev->dev, "failed register gpiochip\n");
828 		return ret;
829 	}
830 
831 	ret = gpiochip_add_pin_range(&pctrl->chip,
832 				     dev_name(pctrl->dev),
833 				     0, 0, pctrl->chip.ngpio);
834 	if (ret) {
835 		dev_err(pctrl->dev, "failed to add pin range\n");
836 		goto unregister_gpiochip;
837 	}
838 
839 	platform_set_drvdata(pdev, pctrl);
840 
841 	dev_dbg(&pdev->dev, "Qualcomm pm8xxx mpp driver probed\n");
842 
843 	return 0;
844 
845 unregister_gpiochip:
846 	gpiochip_remove(&pctrl->chip);
847 
848 	return ret;
849 }
850 
851 static int pm8xxx_mpp_remove(struct platform_device *pdev)
852 {
853 	struct pm8xxx_mpp *pctrl = platform_get_drvdata(pdev);
854 
855 	gpiochip_remove(&pctrl->chip);
856 
857 	return 0;
858 }
859 
860 static struct platform_driver pm8xxx_mpp_driver = {
861 	.driver = {
862 		.name = "qcom-ssbi-mpp",
863 		.of_match_table = pm8xxx_mpp_of_match,
864 	},
865 	.probe = pm8xxx_mpp_probe,
866 	.remove = pm8xxx_mpp_remove,
867 };
868 
869 module_platform_driver(pm8xxx_mpp_driver);
870 
871 MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
872 MODULE_DESCRIPTION("Qualcomm PM8xxx MPP driver");
873 MODULE_LICENSE("GPL v2");
874