1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (c) 2015, The Linux Foundation. All rights reserved. 4 * 5 * GPIO and pin control functions on this SOC are handled by the "TLMM" 6 * device. The driver which controls this device is pinctrl-msm.c. Each 7 * SOC with a TLMM is expected to create a client driver that registers 8 * with pinctrl-msm.c. This means that all TLMM drivers are pin control 9 * drivers. 10 * 11 * This pin control driver is intended to be used only an ACPI-enabled 12 * system. As such, UEFI will handle all pin control configuration, so 13 * this driver does not provide pin control functions. It is effectively 14 * a GPIO-only driver. The alternative is to duplicate the GPIO code of 15 * pinctrl-msm.c into another driver. 16 */ 17 18 #include <linux/module.h> 19 #include <linux/platform_device.h> 20 #include <linux/pinctrl/pinctrl.h> 21 #include <linux/acpi.h> 22 23 #include "pinctrl-msm.h" 24 25 /* A maximum of 256 allows us to use a u8 array to hold the GPIO numbers */ 26 #define MAX_GPIOS 256 27 28 /* maximum size of each gpio name (enough room for "gpioXXX" + null) */ 29 #define NAME_SIZE 8 30 31 static int qdf2xxx_pinctrl_probe(struct platform_device *pdev) 32 { 33 struct msm_pinctrl_soc_data *pinctrl; 34 struct pinctrl_pin_desc *pins; 35 struct msm_pingroup *groups; 36 char (*names)[NAME_SIZE]; 37 unsigned int i; 38 u32 num_gpios; 39 unsigned int avail_gpios; /* The number of GPIOs we support */ 40 u8 gpios[MAX_GPIOS]; /* An array of supported GPIOs */ 41 int ret; 42 43 /* Query the number of GPIOs from ACPI */ 44 ret = device_property_read_u32(&pdev->dev, "num-gpios", &num_gpios); 45 if (ret < 0) { 46 dev_err(&pdev->dev, "missing 'num-gpios' property\n"); 47 return ret; 48 } 49 if (!num_gpios || num_gpios > MAX_GPIOS) { 50 dev_err(&pdev->dev, "invalid 'num-gpios' property\n"); 51 return -ENODEV; 52 } 53 54 /* The number of GPIOs in the approved list */ 55 ret = device_property_count_u8(&pdev->dev, "gpios"); 56 if (ret < 0) { 57 dev_err(&pdev->dev, "missing 'gpios' property\n"); 58 return ret; 59 } 60 /* 61 * The number of available GPIOs should be non-zero, and no 62 * more than the total number of GPIOS. 63 */ 64 if (!ret || ret > num_gpios) { 65 dev_err(&pdev->dev, "invalid 'gpios' property\n"); 66 return -ENODEV; 67 } 68 avail_gpios = ret; 69 70 ret = device_property_read_u8_array(&pdev->dev, "gpios", gpios, 71 avail_gpios); 72 if (ret < 0) { 73 dev_err(&pdev->dev, "could not read list of GPIOs\n"); 74 return ret; 75 } 76 77 pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL); 78 pins = devm_kcalloc(&pdev->dev, num_gpios, 79 sizeof(struct pinctrl_pin_desc), GFP_KERNEL); 80 groups = devm_kcalloc(&pdev->dev, num_gpios, 81 sizeof(struct msm_pingroup), GFP_KERNEL); 82 names = devm_kcalloc(&pdev->dev, avail_gpios, NAME_SIZE, GFP_KERNEL); 83 84 if (!pinctrl || !pins || !groups || !names) 85 return -ENOMEM; 86 87 /* 88 * Initialize the array. GPIOs not listed in the 'gpios' array 89 * still need a number, but nothing else. 90 */ 91 for (i = 0; i < num_gpios; i++) { 92 pins[i].number = i; 93 groups[i].grp.pins = &pins[i].number; 94 } 95 96 /* Populate the entries that are meant to be exposed as GPIOs. */ 97 for (i = 0; i < avail_gpios; i++) { 98 unsigned int gpio = gpios[i]; 99 100 groups[gpio].grp.npins = 1; 101 snprintf(names[i], NAME_SIZE, "gpio%u", gpio); 102 pins[gpio].name = names[i]; 103 groups[gpio].grp.name = names[i]; 104 105 groups[gpio].ctl_reg = 0x10000 * gpio; 106 groups[gpio].io_reg = 0x04 + 0x10000 * gpio; 107 groups[gpio].intr_cfg_reg = 0x08 + 0x10000 * gpio; 108 groups[gpio].intr_status_reg = 0x0c + 0x10000 * gpio; 109 groups[gpio].intr_target_reg = 0x08 + 0x10000 * gpio; 110 111 groups[gpio].mux_bit = 2; 112 groups[gpio].pull_bit = 0; 113 groups[gpio].drv_bit = 6; 114 groups[gpio].oe_bit = 9; 115 groups[gpio].in_bit = 0; 116 groups[gpio].out_bit = 1; 117 groups[gpio].intr_enable_bit = 0; 118 groups[gpio].intr_status_bit = 0; 119 groups[gpio].intr_target_bit = 5; 120 groups[gpio].intr_target_kpss_val = 1; 121 groups[gpio].intr_raw_status_bit = 4; 122 groups[gpio].intr_polarity_bit = 1; 123 groups[gpio].intr_detection_bit = 2; 124 groups[gpio].intr_detection_width = 2; 125 } 126 127 pinctrl->pins = pins; 128 pinctrl->groups = groups; 129 pinctrl->npins = num_gpios; 130 pinctrl->ngroups = num_gpios; 131 pinctrl->ngpios = num_gpios; 132 133 return msm_pinctrl_probe(pdev, pinctrl); 134 } 135 136 static const struct acpi_device_id qdf2xxx_acpi_ids[] = { 137 {"QCOM8002"}, 138 {}, 139 }; 140 MODULE_DEVICE_TABLE(acpi, qdf2xxx_acpi_ids); 141 142 static struct platform_driver qdf2xxx_pinctrl_driver = { 143 .driver = { 144 .name = "qdf2xxx-pinctrl", 145 .acpi_match_table = qdf2xxx_acpi_ids, 146 }, 147 .probe = qdf2xxx_pinctrl_probe, 148 .remove_new = msm_pinctrl_remove, 149 }; 150 151 static int __init qdf2xxx_pinctrl_init(void) 152 { 153 return platform_driver_register(&qdf2xxx_pinctrl_driver); 154 } 155 arch_initcall(qdf2xxx_pinctrl_init); 156 157 static void __exit qdf2xxx_pinctrl_exit(void) 158 { 159 platform_driver_unregister(&qdf2xxx_pinctrl_driver); 160 } 161 module_exit(qdf2xxx_pinctrl_exit); 162 163 MODULE_DESCRIPTION("Qualcomm Technologies QDF2xxx pin control driver"); 164 MODULE_LICENSE("GPL v2"); 165