xref: /linux/drivers/pinctrl/pinctrl-st.c (revision e7d759f31ca295d589f7420719c311870bb3166f)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
4  * Authors:
5  *	Srinivas Kandagatla <srinivas.kandagatla@st.com>
6  */
7 
8 #include <linux/err.h>
9 #include <linux/gpio/driver.h>
10 #include <linux/init.h>
11 #include <linux/io.h>
12 #include <linux/mfd/syscon.h>
13 #include <linux/module.h>
14 #include <linux/of.h>
15 #include <linux/of_address.h>
16 #include <linux/of_irq.h>
17 #include <linux/platform_device.h>
18 #include <linux/regmap.h>
19 #include <linux/seq_file.h>
20 #include <linux/slab.h>
21 #include <linux/string_helpers.h>
22 
23 #include <linux/pinctrl/consumer.h>
24 #include <linux/pinctrl/pinconf.h>
25 #include <linux/pinctrl/pinctrl.h>
26 #include <linux/pinctrl/pinmux.h>
27 
28 #include "core.h"
29 
30 /* PIO Block registers */
31 /* PIO output */
32 #define REG_PIO_POUT			0x00
33 /* Set bits of POUT */
34 #define REG_PIO_SET_POUT		0x04
35 /* Clear bits of POUT */
36 #define REG_PIO_CLR_POUT		0x08
37 /* PIO input */
38 #define REG_PIO_PIN			0x10
39 /* PIO configuration */
40 #define REG_PIO_PC(n)			(0x20 + (n) * 0x10)
41 /* Set bits of PC[2:0] */
42 #define REG_PIO_SET_PC(n)		(0x24 + (n) * 0x10)
43 /* Clear bits of PC[2:0] */
44 #define REG_PIO_CLR_PC(n)		(0x28 + (n) * 0x10)
45 /* PIO input comparison */
46 #define REG_PIO_PCOMP			0x50
47 /* Set bits of PCOMP */
48 #define REG_PIO_SET_PCOMP		0x54
49 /* Clear bits of PCOMP */
50 #define REG_PIO_CLR_PCOMP		0x58
51 /* PIO input comparison mask */
52 #define REG_PIO_PMASK			0x60
53 /* Set bits of PMASK */
54 #define REG_PIO_SET_PMASK		0x64
55 /* Clear bits of PMASK */
56 #define REG_PIO_CLR_PMASK		0x68
57 
58 #define ST_GPIO_DIRECTION_BIDIR	0x1
59 #define ST_GPIO_DIRECTION_OUT	0x2
60 #define ST_GPIO_DIRECTION_IN	0x4
61 
62 /*
63  *  Packed style retime configuration.
64  *  There are two registers cfg0 and cfg1 in this style for each bank.
65  *  Each field in this register is 8 bit corresponding to 8 pins in the bank.
66  */
67 #define RT_P_CFGS_PER_BANK			2
68 #define RT_P_CFG0_CLK1NOTCLK0_FIELD(reg)	REG_FIELD(reg, 0, 7)
69 #define RT_P_CFG0_DELAY_0_FIELD(reg)		REG_FIELD(reg, 16, 23)
70 #define RT_P_CFG0_DELAY_1_FIELD(reg)		REG_FIELD(reg, 24, 31)
71 #define RT_P_CFG1_INVERTCLK_FIELD(reg)		REG_FIELD(reg, 0, 7)
72 #define RT_P_CFG1_RETIME_FIELD(reg)		REG_FIELD(reg, 8, 15)
73 #define RT_P_CFG1_CLKNOTDATA_FIELD(reg)		REG_FIELD(reg, 16, 23)
74 #define RT_P_CFG1_DOUBLE_EDGE_FIELD(reg)	REG_FIELD(reg, 24, 31)
75 
76 /*
77  * Dedicated style retime Configuration register
78  * each register is dedicated per pin.
79  */
80 #define RT_D_CFGS_PER_BANK		8
81 #define RT_D_CFG_CLK_SHIFT		0
82 #define RT_D_CFG_CLK_MASK		(0x3 << 0)
83 #define RT_D_CFG_CLKNOTDATA_SHIFT	2
84 #define RT_D_CFG_CLKNOTDATA_MASK	BIT(2)
85 #define RT_D_CFG_DELAY_SHIFT		3
86 #define RT_D_CFG_DELAY_MASK		(0xf << 3)
87 #define RT_D_CFG_DELAY_INNOTOUT_SHIFT	7
88 #define RT_D_CFG_DELAY_INNOTOUT_MASK	BIT(7)
89 #define RT_D_CFG_DOUBLE_EDGE_SHIFT	8
90 #define RT_D_CFG_DOUBLE_EDGE_MASK	BIT(8)
91 #define RT_D_CFG_INVERTCLK_SHIFT	9
92 #define RT_D_CFG_INVERTCLK_MASK		BIT(9)
93 #define RT_D_CFG_RETIME_SHIFT		10
94 #define RT_D_CFG_RETIME_MASK		BIT(10)
95 
96 /*
97  * Pinconf is represented in an opaque unsigned long variable.
98  * Below is the bit allocation details for each possible configuration.
99  * All the bit fields can be encapsulated into four variables
100  * (direction, retime-type, retime-clk, retime-delay)
101  *
102  *	 +----------------+
103  *[31:28]| reserved-3     |
104  *	 +----------------+-------------
105  *[27]   |	oe	  |		|
106  *	 +----------------+		v
107  *[26]   |	pu	  |	[Direction	]
108  *	 +----------------+		^
109  *[25]   |	od	  |		|
110  *	 +----------------+-------------
111  *[24]   | reserved-2     |
112  *	 +----------------+-------------
113  *[23]   |    retime      |		|
114  *	 +----------------+		|
115  *[22]   | retime-invclk  |		|
116  *	 +----------------+		v
117  *[21]   |retime-clknotdat|	[Retime-type	]
118  *	 +----------------+		^
119  *[20]   | retime-de      |		|
120  *	 +----------------+-------------
121  *[19:18]| retime-clk     |------>[Retime-Clk	]
122  *	 +----------------+
123  *[17:16]|  reserved-1    |
124  *	 +----------------+
125  *[15..0]| retime-delay   |------>[Retime Delay]
126  *	 +----------------+
127  */
128 
129 #define ST_PINCONF_UNPACK(conf, param)\
130 				((conf >> ST_PINCONF_ ##param ##_SHIFT) \
131 				& ST_PINCONF_ ##param ##_MASK)
132 
133 #define ST_PINCONF_PACK(conf, val, param)	(conf |=\
134 				((val & ST_PINCONF_ ##param ##_MASK) << \
135 					ST_PINCONF_ ##param ##_SHIFT))
136 
137 /* Output enable */
138 #define ST_PINCONF_OE_MASK		0x1
139 #define ST_PINCONF_OE_SHIFT		27
140 #define ST_PINCONF_OE			BIT(27)
141 #define ST_PINCONF_UNPACK_OE(conf)	ST_PINCONF_UNPACK(conf, OE)
142 #define ST_PINCONF_PACK_OE(conf)	ST_PINCONF_PACK(conf, 1, OE)
143 
144 /* Pull Up */
145 #define ST_PINCONF_PU_MASK		0x1
146 #define ST_PINCONF_PU_SHIFT		26
147 #define ST_PINCONF_PU			BIT(26)
148 #define ST_PINCONF_UNPACK_PU(conf)	ST_PINCONF_UNPACK(conf, PU)
149 #define ST_PINCONF_PACK_PU(conf)	ST_PINCONF_PACK(conf, 1, PU)
150 
151 /* Open Drain */
152 #define ST_PINCONF_OD_MASK		0x1
153 #define ST_PINCONF_OD_SHIFT		25
154 #define ST_PINCONF_OD			BIT(25)
155 #define ST_PINCONF_UNPACK_OD(conf)	ST_PINCONF_UNPACK(conf, OD)
156 #define ST_PINCONF_PACK_OD(conf)	ST_PINCONF_PACK(conf, 1, OD)
157 
158 #define ST_PINCONF_RT_MASK		0x1
159 #define ST_PINCONF_RT_SHIFT		23
160 #define ST_PINCONF_RT			BIT(23)
161 #define ST_PINCONF_UNPACK_RT(conf)	ST_PINCONF_UNPACK(conf, RT)
162 #define ST_PINCONF_PACK_RT(conf)	ST_PINCONF_PACK(conf, 1, RT)
163 
164 #define ST_PINCONF_RT_INVERTCLK_MASK	0x1
165 #define ST_PINCONF_RT_INVERTCLK_SHIFT	22
166 #define ST_PINCONF_RT_INVERTCLK		BIT(22)
167 #define ST_PINCONF_UNPACK_RT_INVERTCLK(conf) \
168 			ST_PINCONF_UNPACK(conf, RT_INVERTCLK)
169 #define ST_PINCONF_PACK_RT_INVERTCLK(conf) \
170 			ST_PINCONF_PACK(conf, 1, RT_INVERTCLK)
171 
172 #define ST_PINCONF_RT_CLKNOTDATA_MASK	0x1
173 #define ST_PINCONF_RT_CLKNOTDATA_SHIFT	21
174 #define ST_PINCONF_RT_CLKNOTDATA	BIT(21)
175 #define ST_PINCONF_UNPACK_RT_CLKNOTDATA(conf)	\
176 				ST_PINCONF_UNPACK(conf, RT_CLKNOTDATA)
177 #define ST_PINCONF_PACK_RT_CLKNOTDATA(conf) \
178 				ST_PINCONF_PACK(conf, 1, RT_CLKNOTDATA)
179 
180 #define ST_PINCONF_RT_DOUBLE_EDGE_MASK	0x1
181 #define ST_PINCONF_RT_DOUBLE_EDGE_SHIFT	20
182 #define ST_PINCONF_RT_DOUBLE_EDGE	BIT(20)
183 #define ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(conf) \
184 				ST_PINCONF_UNPACK(conf, RT_DOUBLE_EDGE)
185 #define ST_PINCONF_PACK_RT_DOUBLE_EDGE(conf) \
186 				ST_PINCONF_PACK(conf, 1, RT_DOUBLE_EDGE)
187 
188 #define ST_PINCONF_RT_CLK_MASK		0x3
189 #define ST_PINCONF_RT_CLK_SHIFT		18
190 #define ST_PINCONF_RT_CLK		BIT(18)
191 #define ST_PINCONF_UNPACK_RT_CLK(conf)	ST_PINCONF_UNPACK(conf, RT_CLK)
192 #define ST_PINCONF_PACK_RT_CLK(conf, val) ST_PINCONF_PACK(conf, val, RT_CLK)
193 
194 /* RETIME_DELAY in Pico Secs */
195 #define ST_PINCONF_RT_DELAY_MASK	0xffff
196 #define ST_PINCONF_RT_DELAY_SHIFT	0
197 #define ST_PINCONF_UNPACK_RT_DELAY(conf) ST_PINCONF_UNPACK(conf, RT_DELAY)
198 #define ST_PINCONF_PACK_RT_DELAY(conf, val) \
199 				ST_PINCONF_PACK(conf, val, RT_DELAY)
200 
201 #define ST_GPIO_PINS_PER_BANK	(8)
202 #define OF_GPIO_ARGS_MIN	(4)
203 #define OF_RT_ARGS_MIN		(2)
204 
205 #define gpio_range_to_bank(chip) \
206 		container_of(chip, struct st_gpio_bank, range)
207 
208 #define pc_to_bank(pc) \
209 		container_of(pc, struct st_gpio_bank, pc)
210 
211 enum st_retime_style {
212 	st_retime_style_none,
213 	st_retime_style_packed,
214 	st_retime_style_dedicated,
215 };
216 
217 struct st_retime_dedicated {
218 	struct regmap_field *rt[ST_GPIO_PINS_PER_BANK];
219 };
220 
221 struct st_retime_packed {
222 	struct regmap_field *clk1notclk0;
223 	struct regmap_field *delay_0;
224 	struct regmap_field *delay_1;
225 	struct regmap_field *invertclk;
226 	struct regmap_field *retime;
227 	struct regmap_field *clknotdata;
228 	struct regmap_field *double_edge;
229 };
230 
231 struct st_pio_control {
232 	u32 rt_pin_mask;
233 	struct regmap_field *alt, *oe, *pu, *od;
234 	/* retiming */
235 	union {
236 		struct st_retime_packed		rt_p;
237 		struct st_retime_dedicated	rt_d;
238 	} rt;
239 };
240 
241 struct st_pctl_data {
242 	const enum st_retime_style	rt_style;
243 	const unsigned int		*input_delays;
244 	const int			ninput_delays;
245 	const unsigned int		*output_delays;
246 	const int			noutput_delays;
247 	/* register offset information */
248 	const int alt, oe, pu, od, rt;
249 };
250 
251 struct st_pinconf {
252 	int		pin;
253 	const char	*name;
254 	unsigned long	config;
255 	int		altfunc;
256 };
257 
258 struct st_pmx_func {
259 	const char	*name;
260 	const char	**groups;
261 	unsigned	ngroups;
262 };
263 
264 struct st_pctl_group {
265 	const char		*name;
266 	unsigned int		*pins;
267 	unsigned		npins;
268 	struct st_pinconf	*pin_conf;
269 };
270 
271 /*
272  * Edge triggers are not supported at hardware level, it is supported by
273  * software by exploiting the level trigger support in hardware.
274  * Software uses a virtual register (EDGE_CONF) for edge trigger configuration
275  * of each gpio pin in a GPIO bank.
276  *
277  * Each bank has a 32 bit EDGE_CONF register which is divided in to 8 parts of
278  * 4-bits. Each 4-bit space is allocated for each pin in a gpio bank.
279  *
280  * bit allocation per pin is:
281  * Bits:  [0 - 3] | [4 - 7]  [8 - 11] ... ... ... ...  [ 28 - 31]
282  *       --------------------------------------------------------
283  *       |  pin-0  |  pin-2 | pin-3  | ... ... ... ... | pin -7 |
284  *       --------------------------------------------------------
285  *
286  *  A pin can have one of following the values in its edge configuration field.
287  *
288  *	-------   ----------------------------
289  *	[0-3]	- Description
290  *	-------   ----------------------------
291  *	0000	- No edge IRQ.
292  *	0001	- Falling edge IRQ.
293  *	0010	- Rising edge IRQ.
294  *	0011	- Rising and Falling edge IRQ.
295  *	-------   ----------------------------
296  */
297 
298 #define ST_IRQ_EDGE_CONF_BITS_PER_PIN	4
299 #define ST_IRQ_EDGE_MASK		0xf
300 #define ST_IRQ_EDGE_FALLING		BIT(0)
301 #define ST_IRQ_EDGE_RISING		BIT(1)
302 #define ST_IRQ_EDGE_BOTH		(BIT(0) | BIT(1))
303 
304 #define ST_IRQ_RISING_EDGE_CONF(pin) \
305 	(ST_IRQ_EDGE_RISING << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
306 
307 #define ST_IRQ_FALLING_EDGE_CONF(pin) \
308 	(ST_IRQ_EDGE_FALLING << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
309 
310 #define ST_IRQ_BOTH_EDGE_CONF(pin) \
311 	(ST_IRQ_EDGE_BOTH << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
312 
313 #define ST_IRQ_EDGE_CONF(conf, pin) \
314 	(conf >> (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN) & ST_IRQ_EDGE_MASK)
315 
316 struct st_gpio_bank {
317 	struct gpio_chip		gpio_chip;
318 	struct pinctrl_gpio_range	range;
319 	void __iomem			*base;
320 	struct st_pio_control		pc;
321 	unsigned long			irq_edge_conf;
322 	spinlock_t                      lock;
323 };
324 
325 struct st_pinctrl {
326 	struct device			*dev;
327 	struct pinctrl_dev		*pctl;
328 	struct st_gpio_bank		*banks;
329 	int				nbanks;
330 	struct st_pmx_func		*functions;
331 	int				nfunctions;
332 	struct st_pctl_group		*groups;
333 	int				ngroups;
334 	struct regmap			*regmap;
335 	const struct st_pctl_data	*data;
336 	void __iomem			*irqmux_base;
337 };
338 
339 /* SOC specific data */
340 
341 static const unsigned int stih407_delays[] = {0, 300, 500, 750, 1000, 1250,
342 			1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250 };
343 
344 static const struct st_pctl_data  stih407_data = {
345 	.rt_style       = st_retime_style_dedicated,
346 	.input_delays   = stih407_delays,
347 	.ninput_delays  = ARRAY_SIZE(stih407_delays),
348 	.output_delays  = stih407_delays,
349 	.noutput_delays = ARRAY_SIZE(stih407_delays),
350 	.alt = 0, .oe = 40, .pu = 50, .od = 60, .rt = 100,
351 };
352 
353 static const struct st_pctl_data stih407_flashdata = {
354 	.rt_style	= st_retime_style_none,
355 	.input_delays	= stih407_delays,
356 	.ninput_delays	= ARRAY_SIZE(stih407_delays),
357 	.output_delays	= stih407_delays,
358 	.noutput_delays = ARRAY_SIZE(stih407_delays),
359 	.alt = 0,
360 	.oe = -1, /* Not Available */
361 	.pu = -1, /* Not Available */
362 	.od = 60,
363 	.rt = 100,
364 };
365 
366 static struct st_pio_control *st_get_pio_control(
367 			struct pinctrl_dev *pctldev, int pin)
368 {
369 	struct pinctrl_gpio_range *range =
370 			 pinctrl_find_gpio_range_from_pin(pctldev, pin);
371 	struct st_gpio_bank *bank = gpio_range_to_bank(range);
372 
373 	return &bank->pc;
374 }
375 
376 /* Low level functions.. */
377 static inline int st_gpio_bank(int gpio)
378 {
379 	return gpio/ST_GPIO_PINS_PER_BANK;
380 }
381 
382 static inline int st_gpio_pin(int gpio)
383 {
384 	return gpio%ST_GPIO_PINS_PER_BANK;
385 }
386 
387 static void st_pinconf_set_config(struct st_pio_control *pc,
388 				int pin, unsigned long config)
389 {
390 	struct regmap_field *output_enable = pc->oe;
391 	struct regmap_field *pull_up = pc->pu;
392 	struct regmap_field *open_drain = pc->od;
393 	unsigned int oe_value, pu_value, od_value;
394 	unsigned long mask = BIT(pin);
395 
396 	if (output_enable) {
397 		regmap_field_read(output_enable, &oe_value);
398 		oe_value &= ~mask;
399 		if (config & ST_PINCONF_OE)
400 			oe_value |= mask;
401 		regmap_field_write(output_enable, oe_value);
402 	}
403 
404 	if (pull_up) {
405 		regmap_field_read(pull_up, &pu_value);
406 		pu_value &= ~mask;
407 		if (config & ST_PINCONF_PU)
408 			pu_value |= mask;
409 		regmap_field_write(pull_up, pu_value);
410 	}
411 
412 	if (open_drain) {
413 		regmap_field_read(open_drain, &od_value);
414 		od_value &= ~mask;
415 		if (config & ST_PINCONF_OD)
416 			od_value |= mask;
417 		regmap_field_write(open_drain, od_value);
418 	}
419 }
420 
421 static void st_pctl_set_function(struct st_pio_control *pc,
422 				int pin_id, int function)
423 {
424 	struct regmap_field *alt = pc->alt;
425 	unsigned int val;
426 	int pin = st_gpio_pin(pin_id);
427 	int offset = pin * 4;
428 
429 	if (!alt)
430 		return;
431 
432 	regmap_field_read(alt, &val);
433 	val &= ~(0xf << offset);
434 	val |= function << offset;
435 	regmap_field_write(alt, val);
436 }
437 
438 static unsigned int st_pctl_get_pin_function(struct st_pio_control *pc, int pin)
439 {
440 	struct regmap_field *alt = pc->alt;
441 	unsigned int val;
442 	int offset = pin * 4;
443 
444 	if (!alt)
445 		return 0;
446 
447 	regmap_field_read(alt, &val);
448 
449 	return (val >> offset) & 0xf;
450 }
451 
452 static unsigned long st_pinconf_delay_to_bit(unsigned int delay,
453 	const struct st_pctl_data *data, unsigned long config)
454 {
455 	const unsigned int *delay_times;
456 	int num_delay_times, i, closest_index = -1;
457 	unsigned int closest_divergence = UINT_MAX;
458 
459 	if (ST_PINCONF_UNPACK_OE(config)) {
460 		delay_times = data->output_delays;
461 		num_delay_times = data->noutput_delays;
462 	} else {
463 		delay_times = data->input_delays;
464 		num_delay_times = data->ninput_delays;
465 	}
466 
467 	for (i = 0; i < num_delay_times; i++) {
468 		unsigned int divergence = abs(delay - delay_times[i]);
469 
470 		if (divergence == 0)
471 			return i;
472 
473 		if (divergence < closest_divergence) {
474 			closest_divergence = divergence;
475 			closest_index = i;
476 		}
477 	}
478 
479 	pr_warn("Attempt to set delay %d, closest available %d\n",
480 	     delay, delay_times[closest_index]);
481 
482 	return closest_index;
483 }
484 
485 static unsigned long st_pinconf_bit_to_delay(unsigned int index,
486 	const struct st_pctl_data *data, unsigned long output)
487 {
488 	const unsigned int *delay_times;
489 	int num_delay_times;
490 
491 	if (output) {
492 		delay_times = data->output_delays;
493 		num_delay_times = data->noutput_delays;
494 	} else {
495 		delay_times = data->input_delays;
496 		num_delay_times = data->ninput_delays;
497 	}
498 
499 	if (index < num_delay_times) {
500 		return delay_times[index];
501 	} else {
502 		pr_warn("Delay not found in/out delay list\n");
503 		return 0;
504 	}
505 }
506 
507 static void st_regmap_field_bit_set_clear_pin(struct regmap_field *field,
508 	int enable, int pin)
509 {
510 	unsigned int val = 0;
511 
512 	regmap_field_read(field, &val);
513 	if (enable)
514 		val |= BIT(pin);
515 	else
516 		val &= ~BIT(pin);
517 	regmap_field_write(field, val);
518 }
519 
520 static void st_pinconf_set_retime_packed(struct st_pinctrl *info,
521 	struct st_pio_control *pc,	unsigned long config, int pin)
522 {
523 	const struct st_pctl_data *data = info->data;
524 	struct st_retime_packed *rt_p = &pc->rt.rt_p;
525 	unsigned int delay;
526 
527 	st_regmap_field_bit_set_clear_pin(rt_p->clk1notclk0,
528 				ST_PINCONF_UNPACK_RT_CLK(config), pin);
529 
530 	st_regmap_field_bit_set_clear_pin(rt_p->clknotdata,
531 				ST_PINCONF_UNPACK_RT_CLKNOTDATA(config), pin);
532 
533 	st_regmap_field_bit_set_clear_pin(rt_p->double_edge,
534 				ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config), pin);
535 
536 	st_regmap_field_bit_set_clear_pin(rt_p->invertclk,
537 				ST_PINCONF_UNPACK_RT_INVERTCLK(config), pin);
538 
539 	st_regmap_field_bit_set_clear_pin(rt_p->retime,
540 				ST_PINCONF_UNPACK_RT(config), pin);
541 
542 	delay = st_pinconf_delay_to_bit(ST_PINCONF_UNPACK_RT_DELAY(config),
543 					data, config);
544 	/* 2 bit delay, lsb */
545 	st_regmap_field_bit_set_clear_pin(rt_p->delay_0, delay & 0x1, pin);
546 	/* 2 bit delay, msb */
547 	st_regmap_field_bit_set_clear_pin(rt_p->delay_1, delay & 0x2, pin);
548 }
549 
550 static void st_pinconf_set_retime_dedicated(struct st_pinctrl *info,
551 	struct st_pio_control *pc, unsigned long config, int pin)
552 {
553 	int input	= ST_PINCONF_UNPACK_OE(config) ? 0 : 1;
554 	int clk		= ST_PINCONF_UNPACK_RT_CLK(config);
555 	int clknotdata	= ST_PINCONF_UNPACK_RT_CLKNOTDATA(config);
556 	int double_edge	= ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config);
557 	int invertclk	= ST_PINCONF_UNPACK_RT_INVERTCLK(config);
558 	int retime	= ST_PINCONF_UNPACK_RT(config);
559 
560 	unsigned long delay = st_pinconf_delay_to_bit(
561 			ST_PINCONF_UNPACK_RT_DELAY(config),
562 			info->data, config);
563 	struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
564 
565 	unsigned long retime_config =
566 		((clk) << RT_D_CFG_CLK_SHIFT) |
567 		((delay) << RT_D_CFG_DELAY_SHIFT) |
568 		((input) << RT_D_CFG_DELAY_INNOTOUT_SHIFT) |
569 		((retime) << RT_D_CFG_RETIME_SHIFT) |
570 		((clknotdata) << RT_D_CFG_CLKNOTDATA_SHIFT) |
571 		((invertclk) << RT_D_CFG_INVERTCLK_SHIFT) |
572 		((double_edge) << RT_D_CFG_DOUBLE_EDGE_SHIFT);
573 
574 	regmap_field_write(rt_d->rt[pin], retime_config);
575 }
576 
577 static void st_pinconf_get_direction(struct st_pio_control *pc,
578 	int pin, unsigned long *config)
579 {
580 	unsigned int oe_value, pu_value, od_value;
581 
582 	if (pc->oe) {
583 		regmap_field_read(pc->oe, &oe_value);
584 		if (oe_value & BIT(pin))
585 			ST_PINCONF_PACK_OE(*config);
586 	}
587 
588 	if (pc->pu) {
589 		regmap_field_read(pc->pu, &pu_value);
590 		if (pu_value & BIT(pin))
591 			ST_PINCONF_PACK_PU(*config);
592 	}
593 
594 	if (pc->od) {
595 		regmap_field_read(pc->od, &od_value);
596 		if (od_value & BIT(pin))
597 			ST_PINCONF_PACK_OD(*config);
598 	}
599 }
600 
601 static int st_pinconf_get_retime_packed(struct st_pinctrl *info,
602 	struct st_pio_control *pc,	int pin, unsigned long *config)
603 {
604 	const struct st_pctl_data *data = info->data;
605 	struct st_retime_packed *rt_p = &pc->rt.rt_p;
606 	unsigned int delay_bits, delay, delay0, delay1, val;
607 	int output = ST_PINCONF_UNPACK_OE(*config);
608 
609 	if (!regmap_field_read(rt_p->retime, &val) && (val & BIT(pin)))
610 		ST_PINCONF_PACK_RT(*config);
611 
612 	if (!regmap_field_read(rt_p->clk1notclk0, &val) && (val & BIT(pin)))
613 		ST_PINCONF_PACK_RT_CLK(*config, 1);
614 
615 	if (!regmap_field_read(rt_p->clknotdata, &val) && (val & BIT(pin)))
616 		ST_PINCONF_PACK_RT_CLKNOTDATA(*config);
617 
618 	if (!regmap_field_read(rt_p->double_edge, &val) && (val & BIT(pin)))
619 		ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config);
620 
621 	if (!regmap_field_read(rt_p->invertclk, &val) && (val & BIT(pin)))
622 		ST_PINCONF_PACK_RT_INVERTCLK(*config);
623 
624 	regmap_field_read(rt_p->delay_0, &delay0);
625 	regmap_field_read(rt_p->delay_1, &delay1);
626 	delay_bits = (((delay1 & BIT(pin)) ? 1 : 0) << 1) |
627 			(((delay0 & BIT(pin)) ? 1 : 0));
628 	delay =  st_pinconf_bit_to_delay(delay_bits, data, output);
629 	ST_PINCONF_PACK_RT_DELAY(*config, delay);
630 
631 	return 0;
632 }
633 
634 static int st_pinconf_get_retime_dedicated(struct st_pinctrl *info,
635 	struct st_pio_control *pc,	int pin, unsigned long *config)
636 {
637 	unsigned int value;
638 	unsigned long delay_bits, delay, rt_clk;
639 	int output = ST_PINCONF_UNPACK_OE(*config);
640 	struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
641 
642 	regmap_field_read(rt_d->rt[pin], &value);
643 
644 	rt_clk = (value & RT_D_CFG_CLK_MASK) >> RT_D_CFG_CLK_SHIFT;
645 	ST_PINCONF_PACK_RT_CLK(*config, rt_clk);
646 
647 	delay_bits = (value & RT_D_CFG_DELAY_MASK) >> RT_D_CFG_DELAY_SHIFT;
648 	delay =  st_pinconf_bit_to_delay(delay_bits, info->data, output);
649 	ST_PINCONF_PACK_RT_DELAY(*config, delay);
650 
651 	if (value & RT_D_CFG_CLKNOTDATA_MASK)
652 		ST_PINCONF_PACK_RT_CLKNOTDATA(*config);
653 
654 	if (value & RT_D_CFG_DOUBLE_EDGE_MASK)
655 		ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config);
656 
657 	if (value & RT_D_CFG_INVERTCLK_MASK)
658 		ST_PINCONF_PACK_RT_INVERTCLK(*config);
659 
660 	if (value & RT_D_CFG_RETIME_MASK)
661 		ST_PINCONF_PACK_RT(*config);
662 
663 	return 0;
664 }
665 
666 /* GPIO related functions */
667 
668 static inline void __st_gpio_set(struct st_gpio_bank *bank,
669 	unsigned offset, int value)
670 {
671 	if (value)
672 		writel(BIT(offset), bank->base + REG_PIO_SET_POUT);
673 	else
674 		writel(BIT(offset), bank->base + REG_PIO_CLR_POUT);
675 }
676 
677 static void st_gpio_direction(struct st_gpio_bank *bank,
678 		unsigned int gpio, unsigned int direction)
679 {
680 	int offset = st_gpio_pin(gpio);
681 	int i = 0;
682 	/**
683 	 * There are three configuration registers (PIOn_PC0, PIOn_PC1
684 	 * and PIOn_PC2) for each port. These are used to configure the
685 	 * PIO port pins. Each pin can be configured as an input, output,
686 	 * bidirectional, or alternative function pin. Three bits, one bit
687 	 * from each of the three registers, configure the corresponding bit of
688 	 * the port. Valid bit settings is:
689 	 *
690 	 * PC2		PC1		PC0	Direction.
691 	 * 0		0		0	[Input Weak pull-up]
692 	 * 0		0 or 1		1	[Bidirection]
693 	 * 0		1		0	[Output]
694 	 * 1		0		0	[Input]
695 	 *
696 	 * PIOn_SET_PC and PIOn_CLR_PC registers are used to set and clear bits
697 	 * individually.
698 	 */
699 	for (i = 0; i <= 2; i++) {
700 		if (direction & BIT(i))
701 			writel(BIT(offset), bank->base + REG_PIO_SET_PC(i));
702 		else
703 			writel(BIT(offset), bank->base + REG_PIO_CLR_PC(i));
704 	}
705 }
706 
707 static int st_gpio_get(struct gpio_chip *chip, unsigned offset)
708 {
709 	struct st_gpio_bank *bank = gpiochip_get_data(chip);
710 
711 	return !!(readl(bank->base + REG_PIO_PIN) & BIT(offset));
712 }
713 
714 static void st_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
715 {
716 	struct st_gpio_bank *bank = gpiochip_get_data(chip);
717 	__st_gpio_set(bank, offset, value);
718 }
719 
720 static int st_gpio_direction_output(struct gpio_chip *chip,
721 	unsigned offset, int value)
722 {
723 	struct st_gpio_bank *bank = gpiochip_get_data(chip);
724 
725 	__st_gpio_set(bank, offset, value);
726 	pinctrl_gpio_direction_output(chip, offset);
727 
728 	return 0;
729 }
730 
731 static int st_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
732 {
733 	struct st_gpio_bank *bank = gpiochip_get_data(chip);
734 	struct st_pio_control pc = bank->pc;
735 	unsigned long config;
736 	unsigned int direction = 0;
737 	unsigned int function;
738 	unsigned int value;
739 	int i = 0;
740 
741 	/* Alternate function direction is handled by Pinctrl */
742 	function = st_pctl_get_pin_function(&pc, offset);
743 	if (function) {
744 		st_pinconf_get_direction(&pc, offset, &config);
745 		if (ST_PINCONF_UNPACK_OE(config))
746 			return GPIO_LINE_DIRECTION_OUT;
747 
748 		return GPIO_LINE_DIRECTION_IN;
749 	}
750 
751 	/*
752 	 * GPIO direction is handled differently
753 	 * - See st_gpio_direction() above for an explanation
754 	 */
755 	for (i = 0; i <= 2; i++) {
756 		value = readl(bank->base + REG_PIO_PC(i));
757 		direction |= ((value >> offset) & 0x1) << i;
758 	}
759 
760 	if (direction == ST_GPIO_DIRECTION_IN)
761 		return GPIO_LINE_DIRECTION_IN;
762 
763 	return GPIO_LINE_DIRECTION_OUT;
764 }
765 
766 /* Pinctrl Groups */
767 static int st_pctl_get_groups_count(struct pinctrl_dev *pctldev)
768 {
769 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
770 
771 	return info->ngroups;
772 }
773 
774 static const char *st_pctl_get_group_name(struct pinctrl_dev *pctldev,
775 				       unsigned selector)
776 {
777 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
778 
779 	return info->groups[selector].name;
780 }
781 
782 static int st_pctl_get_group_pins(struct pinctrl_dev *pctldev,
783 	unsigned selector, const unsigned **pins, unsigned *npins)
784 {
785 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
786 
787 	if (selector >= info->ngroups)
788 		return -EINVAL;
789 
790 	*pins = info->groups[selector].pins;
791 	*npins = info->groups[selector].npins;
792 
793 	return 0;
794 }
795 
796 static inline const struct st_pctl_group *st_pctl_find_group_by_name(
797 	const struct st_pinctrl *info, const char *name)
798 {
799 	int i;
800 
801 	for (i = 0; i < info->ngroups; i++) {
802 		if (!strcmp(info->groups[i].name, name))
803 			return &info->groups[i];
804 	}
805 
806 	return NULL;
807 }
808 
809 static int st_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
810 	struct device_node *np, struct pinctrl_map **map, unsigned *num_maps)
811 {
812 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
813 	const struct st_pctl_group *grp;
814 	struct device *dev = info->dev;
815 	struct pinctrl_map *new_map;
816 	struct device_node *parent;
817 	int map_num, i;
818 
819 	grp = st_pctl_find_group_by_name(info, np->name);
820 	if (!grp) {
821 		dev_err(dev, "unable to find group for node %pOFn\n", np);
822 		return -EINVAL;
823 	}
824 
825 	map_num = grp->npins + 1;
826 	new_map = devm_kcalloc(dev, map_num, sizeof(*new_map), GFP_KERNEL);
827 	if (!new_map)
828 		return -ENOMEM;
829 
830 	parent = of_get_parent(np);
831 	if (!parent) {
832 		devm_kfree(dev, new_map);
833 		return -EINVAL;
834 	}
835 
836 	*map = new_map;
837 	*num_maps = map_num;
838 	new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
839 	new_map[0].data.mux.function = parent->name;
840 	new_map[0].data.mux.group = np->name;
841 	of_node_put(parent);
842 
843 	/* create config map per pin */
844 	new_map++;
845 	for (i = 0; i < grp->npins; i++) {
846 		new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
847 		new_map[i].data.configs.group_or_pin =
848 				pin_get_name(pctldev, grp->pins[i]);
849 		new_map[i].data.configs.configs = &grp->pin_conf[i].config;
850 		new_map[i].data.configs.num_configs = 1;
851 	}
852 	dev_info(dev, "maps: function %s group %s num %d\n",
853 		(*map)->data.mux.function, grp->name, map_num);
854 
855 	return 0;
856 }
857 
858 static void st_pctl_dt_free_map(struct pinctrl_dev *pctldev,
859 			struct pinctrl_map *map, unsigned num_maps)
860 {
861 }
862 
863 static const struct pinctrl_ops st_pctlops = {
864 	.get_groups_count	= st_pctl_get_groups_count,
865 	.get_group_pins		= st_pctl_get_group_pins,
866 	.get_group_name		= st_pctl_get_group_name,
867 	.dt_node_to_map		= st_pctl_dt_node_to_map,
868 	.dt_free_map		= st_pctl_dt_free_map,
869 };
870 
871 /* Pinmux */
872 static int st_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
873 {
874 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
875 
876 	return info->nfunctions;
877 }
878 
879 static const char *st_pmx_get_fname(struct pinctrl_dev *pctldev,
880 	unsigned selector)
881 {
882 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
883 
884 	return info->functions[selector].name;
885 }
886 
887 static int st_pmx_get_groups(struct pinctrl_dev *pctldev,
888 	unsigned selector, const char * const **grps, unsigned * const ngrps)
889 {
890 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
891 	*grps = info->functions[selector].groups;
892 	*ngrps = info->functions[selector].ngroups;
893 
894 	return 0;
895 }
896 
897 static int st_pmx_set_mux(struct pinctrl_dev *pctldev, unsigned fselector,
898 			unsigned group)
899 {
900 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
901 	struct st_pinconf *conf = info->groups[group].pin_conf;
902 	struct st_pio_control *pc;
903 	int i;
904 
905 	for (i = 0; i < info->groups[group].npins; i++) {
906 		pc = st_get_pio_control(pctldev, conf[i].pin);
907 		st_pctl_set_function(pc, conf[i].pin, conf[i].altfunc);
908 	}
909 
910 	return 0;
911 }
912 
913 static int st_pmx_set_gpio_direction(struct pinctrl_dev *pctldev,
914 			struct pinctrl_gpio_range *range, unsigned gpio,
915 			bool input)
916 {
917 	struct st_gpio_bank *bank = gpio_range_to_bank(range);
918 	/*
919 	 * When a PIO bank is used in its primary function mode (altfunc = 0)
920 	 * Output Enable (OE), Open Drain(OD), and Pull Up (PU)
921 	 * for the primary PIO functions are driven by the related PIO block
922 	 */
923 	st_pctl_set_function(&bank->pc, gpio, 0);
924 	st_gpio_direction(bank, gpio, input ?
925 		ST_GPIO_DIRECTION_IN : ST_GPIO_DIRECTION_OUT);
926 
927 	return 0;
928 }
929 
930 static const struct pinmux_ops st_pmxops = {
931 	.get_functions_count	= st_pmx_get_funcs_count,
932 	.get_function_name	= st_pmx_get_fname,
933 	.get_function_groups	= st_pmx_get_groups,
934 	.set_mux		= st_pmx_set_mux,
935 	.gpio_set_direction	= st_pmx_set_gpio_direction,
936 	.strict			= true,
937 };
938 
939 /* Pinconf  */
940 static void st_pinconf_get_retime(struct st_pinctrl *info,
941 	struct st_pio_control *pc, int pin, unsigned long *config)
942 {
943 	if (info->data->rt_style == st_retime_style_packed)
944 		st_pinconf_get_retime_packed(info, pc, pin, config);
945 	else if (info->data->rt_style == st_retime_style_dedicated)
946 		if ((BIT(pin) & pc->rt_pin_mask))
947 			st_pinconf_get_retime_dedicated(info, pc,
948 					pin, config);
949 }
950 
951 static void st_pinconf_set_retime(struct st_pinctrl *info,
952 	struct st_pio_control *pc, int pin, unsigned long config)
953 {
954 	if (info->data->rt_style == st_retime_style_packed)
955 		st_pinconf_set_retime_packed(info, pc, config, pin);
956 	else if (info->data->rt_style == st_retime_style_dedicated)
957 		if ((BIT(pin) & pc->rt_pin_mask))
958 			st_pinconf_set_retime_dedicated(info, pc,
959 							config, pin);
960 }
961 
962 static int st_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin_id,
963 			unsigned long *configs, unsigned num_configs)
964 {
965 	int pin = st_gpio_pin(pin_id);
966 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
967 	struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id);
968 	int i;
969 
970 	for (i = 0; i < num_configs; i++) {
971 		st_pinconf_set_config(pc, pin, configs[i]);
972 		st_pinconf_set_retime(info, pc, pin, configs[i]);
973 	} /* for each config */
974 
975 	return 0;
976 }
977 
978 static int st_pinconf_get(struct pinctrl_dev *pctldev,
979 			     unsigned pin_id, unsigned long *config)
980 {
981 	int pin = st_gpio_pin(pin_id);
982 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
983 	struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id);
984 
985 	*config = 0;
986 	st_pinconf_get_direction(pc, pin, config);
987 	st_pinconf_get_retime(info, pc, pin, config);
988 
989 	return 0;
990 }
991 
992 static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev,
993 				   struct seq_file *s, unsigned pin_id)
994 {
995 	struct st_pio_control *pc;
996 	unsigned long config;
997 	unsigned int function;
998 	int offset = st_gpio_pin(pin_id);
999 	char f[16];
1000 	int oe;
1001 
1002 	mutex_unlock(&pctldev->mutex);
1003 	pc = st_get_pio_control(pctldev, pin_id);
1004 	st_pinconf_get(pctldev, pin_id, &config);
1005 	mutex_lock(&pctldev->mutex);
1006 
1007 	function = st_pctl_get_pin_function(pc, offset);
1008 	if (function)
1009 		snprintf(f, 10, "Alt Fn %u", function);
1010 	else
1011 		snprintf(f, 5, "GPIO");
1012 
1013 	oe = st_gpio_get_direction(&pc_to_bank(pc)->gpio_chip, offset);
1014 	seq_printf(s, "[OE:%d,PU:%ld,OD:%ld]\t%s\n"
1015 		"\t\t[retime:%ld,invclk:%ld,clknotdat:%ld,"
1016 		"de:%ld,rt-clk:%ld,rt-delay:%ld]",
1017 		(oe == GPIO_LINE_DIRECTION_OUT),
1018 		ST_PINCONF_UNPACK_PU(config),
1019 		ST_PINCONF_UNPACK_OD(config),
1020 		f,
1021 		ST_PINCONF_UNPACK_RT(config),
1022 		ST_PINCONF_UNPACK_RT_INVERTCLK(config),
1023 		ST_PINCONF_UNPACK_RT_CLKNOTDATA(config),
1024 		ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config),
1025 		ST_PINCONF_UNPACK_RT_CLK(config),
1026 		ST_PINCONF_UNPACK_RT_DELAY(config));
1027 }
1028 
1029 static const struct pinconf_ops st_confops = {
1030 	.pin_config_get		= st_pinconf_get,
1031 	.pin_config_set		= st_pinconf_set,
1032 	.pin_config_dbg_show	= st_pinconf_dbg_show,
1033 };
1034 
1035 static void st_pctl_dt_child_count(struct st_pinctrl *info,
1036 				     struct device_node *np)
1037 {
1038 	struct device_node *child;
1039 	for_each_child_of_node(np, child) {
1040 		if (of_property_read_bool(child, "gpio-controller")) {
1041 			info->nbanks++;
1042 		} else {
1043 			info->nfunctions++;
1044 			info->ngroups += of_get_child_count(child);
1045 		}
1046 	}
1047 }
1048 
1049 static int st_pctl_dt_setup_retime_packed(struct st_pinctrl *info,
1050 	int bank, struct st_pio_control *pc)
1051 {
1052 	struct device *dev = info->dev;
1053 	struct regmap *rm = info->regmap;
1054 	const struct st_pctl_data *data = info->data;
1055 	/* 2 registers per bank */
1056 	int reg = (data->rt + bank * RT_P_CFGS_PER_BANK) * 4;
1057 	struct st_retime_packed *rt_p = &pc->rt.rt_p;
1058 	/* cfg0 */
1059 	struct reg_field clk1notclk0 = RT_P_CFG0_CLK1NOTCLK0_FIELD(reg);
1060 	struct reg_field delay_0 = RT_P_CFG0_DELAY_0_FIELD(reg);
1061 	struct reg_field delay_1 = RT_P_CFG0_DELAY_1_FIELD(reg);
1062 	/* cfg1 */
1063 	struct reg_field invertclk = RT_P_CFG1_INVERTCLK_FIELD(reg + 4);
1064 	struct reg_field retime = RT_P_CFG1_RETIME_FIELD(reg + 4);
1065 	struct reg_field clknotdata = RT_P_CFG1_CLKNOTDATA_FIELD(reg + 4);
1066 	struct reg_field double_edge = RT_P_CFG1_DOUBLE_EDGE_FIELD(reg + 4);
1067 
1068 	rt_p->clk1notclk0 = devm_regmap_field_alloc(dev, rm, clk1notclk0);
1069 	rt_p->delay_0	= devm_regmap_field_alloc(dev, rm, delay_0);
1070 	rt_p->delay_1 = devm_regmap_field_alloc(dev, rm, delay_1);
1071 	rt_p->invertclk = devm_regmap_field_alloc(dev, rm, invertclk);
1072 	rt_p->retime = devm_regmap_field_alloc(dev, rm, retime);
1073 	rt_p->clknotdata = devm_regmap_field_alloc(dev, rm, clknotdata);
1074 	rt_p->double_edge = devm_regmap_field_alloc(dev, rm, double_edge);
1075 
1076 	if (IS_ERR(rt_p->clk1notclk0) || IS_ERR(rt_p->delay_0) ||
1077 		 IS_ERR(rt_p->delay_1) || IS_ERR(rt_p->invertclk) ||
1078 		 IS_ERR(rt_p->retime) || IS_ERR(rt_p->clknotdata) ||
1079 		 IS_ERR(rt_p->double_edge))
1080 		return -EINVAL;
1081 
1082 	return 0;
1083 }
1084 
1085 static int st_pctl_dt_setup_retime_dedicated(struct st_pinctrl *info,
1086 	int bank, struct st_pio_control *pc)
1087 {
1088 	struct device *dev = info->dev;
1089 	struct regmap *rm = info->regmap;
1090 	const struct st_pctl_data *data = info->data;
1091 	/* 8 registers per bank */
1092 	int reg_offset = (data->rt + bank * RT_D_CFGS_PER_BANK) * 4;
1093 	struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
1094 	unsigned int j;
1095 	u32 pin_mask = pc->rt_pin_mask;
1096 
1097 	for (j = 0; j < RT_D_CFGS_PER_BANK; j++) {
1098 		if (BIT(j) & pin_mask) {
1099 			struct reg_field reg = REG_FIELD(reg_offset, 0, 31);
1100 			rt_d->rt[j] = devm_regmap_field_alloc(dev, rm, reg);
1101 			if (IS_ERR(rt_d->rt[j]))
1102 				return -EINVAL;
1103 			reg_offset += 4;
1104 		}
1105 	}
1106 	return 0;
1107 }
1108 
1109 static int st_pctl_dt_setup_retime(struct st_pinctrl *info,
1110 	int bank, struct st_pio_control *pc)
1111 {
1112 	const struct st_pctl_data *data = info->data;
1113 	if (data->rt_style  == st_retime_style_packed)
1114 		return st_pctl_dt_setup_retime_packed(info, bank, pc);
1115 	else if (data->rt_style == st_retime_style_dedicated)
1116 		return st_pctl_dt_setup_retime_dedicated(info, bank, pc);
1117 
1118 	return -EINVAL;
1119 }
1120 
1121 
1122 static struct regmap_field *st_pc_get_value(struct device *dev,
1123 					    struct regmap *regmap, int bank,
1124 					    int data, int lsb, int msb)
1125 {
1126 	struct reg_field reg = REG_FIELD((data + bank) * 4, lsb, msb);
1127 
1128 	if (data < 0)
1129 		return NULL;
1130 
1131 	return devm_regmap_field_alloc(dev, regmap, reg);
1132 }
1133 
1134 static void st_parse_syscfgs(struct st_pinctrl *info, int bank,
1135 			     struct device_node *np)
1136 {
1137 	const struct st_pctl_data *data = info->data;
1138 	/**
1139 	 * For a given shared register like OE/PU/OD, there are 8 bits per bank
1140 	 * 0:7 belongs to bank0, 8:15 belongs to bank1 ...
1141 	 * So each register is shared across 4 banks.
1142 	 */
1143 	int lsb = (bank%4) * ST_GPIO_PINS_PER_BANK;
1144 	int msb = lsb + ST_GPIO_PINS_PER_BANK - 1;
1145 	struct st_pio_control *pc = &info->banks[bank].pc;
1146 	struct device *dev = info->dev;
1147 	struct regmap *regmap  = info->regmap;
1148 
1149 	pc->alt = st_pc_get_value(dev, regmap, bank, data->alt, 0, 31);
1150 	pc->oe = st_pc_get_value(dev, regmap, bank/4, data->oe, lsb, msb);
1151 	pc->pu = st_pc_get_value(dev, regmap, bank/4, data->pu, lsb, msb);
1152 	pc->od = st_pc_get_value(dev, regmap, bank/4, data->od, lsb, msb);
1153 
1154 	/* retime avaiable for all pins by default */
1155 	pc->rt_pin_mask = 0xff;
1156 	of_property_read_u32(np, "st,retime-pin-mask", &pc->rt_pin_mask);
1157 	st_pctl_dt_setup_retime(info, bank, pc);
1158 
1159 	return;
1160 }
1161 
1162 static int st_pctl_dt_calculate_pin(struct st_pinctrl *info,
1163 				    phandle bank, unsigned int offset)
1164 {
1165 	struct device_node *np;
1166 	struct gpio_chip *chip;
1167 	int retval = -EINVAL;
1168 	int i;
1169 
1170 	np = of_find_node_by_phandle(bank);
1171 	if (!np)
1172 		return -EINVAL;
1173 
1174 	for (i = 0; i < info->nbanks; i++) {
1175 		chip = &info->banks[i].gpio_chip;
1176 		if (chip->fwnode == of_fwnode_handle(np)) {
1177 			if (offset < chip->ngpio)
1178 				retval = chip->base + offset;
1179 			break;
1180 		}
1181 	}
1182 
1183 	of_node_put(np);
1184 	return retval;
1185 }
1186 
1187 /*
1188  * Each pin is represented in of the below forms.
1189  * <bank offset mux direction rt_type rt_delay rt_clk>
1190  */
1191 static int st_pctl_dt_parse_groups(struct device_node *np,
1192 	struct st_pctl_group *grp, struct st_pinctrl *info, int idx)
1193 {
1194 	/* bank pad direction val altfunction */
1195 	const __be32 *list;
1196 	struct property *pp;
1197 	struct device *dev = info->dev;
1198 	struct st_pinconf *conf;
1199 	struct device_node *pins;
1200 	phandle bank;
1201 	unsigned int offset;
1202 	int i = 0, npins = 0, nr_props, ret = 0;
1203 
1204 	pins = of_get_child_by_name(np, "st,pins");
1205 	if (!pins)
1206 		return -ENODATA;
1207 
1208 	for_each_property_of_node(pins, pp) {
1209 		/* Skip those we do not want to proceed */
1210 		if (!strcmp(pp->name, "name"))
1211 			continue;
1212 
1213 		if (pp->length / sizeof(__be32) >= OF_GPIO_ARGS_MIN) {
1214 			npins++;
1215 		} else {
1216 			pr_warn("Invalid st,pins in %pOFn node\n", np);
1217 			ret = -EINVAL;
1218 			goto out_put_node;
1219 		}
1220 	}
1221 
1222 	grp->npins = npins;
1223 	grp->name = np->name;
1224 	grp->pins = devm_kcalloc(dev, npins, sizeof(*grp->pins), GFP_KERNEL);
1225 	grp->pin_conf = devm_kcalloc(dev, npins, sizeof(*grp->pin_conf), GFP_KERNEL);
1226 
1227 	if (!grp->pins || !grp->pin_conf) {
1228 		ret = -ENOMEM;
1229 		goto out_put_node;
1230 	}
1231 
1232 	/* <bank offset mux direction rt_type rt_delay rt_clk> */
1233 	for_each_property_of_node(pins, pp) {
1234 		if (!strcmp(pp->name, "name"))
1235 			continue;
1236 		nr_props = pp->length/sizeof(u32);
1237 		list = pp->value;
1238 		conf = &grp->pin_conf[i];
1239 
1240 		/* bank & offset */
1241 		bank = be32_to_cpup(list++);
1242 		offset = be32_to_cpup(list++);
1243 		conf->pin = st_pctl_dt_calculate_pin(info, bank, offset);
1244 		conf->name = pp->name;
1245 		grp->pins[i] = conf->pin;
1246 		/* mux */
1247 		conf->altfunc = be32_to_cpup(list++);
1248 		conf->config = 0;
1249 		/* direction */
1250 		conf->config |= be32_to_cpup(list++);
1251 		/* rt_type rt_delay rt_clk */
1252 		if (nr_props >= OF_GPIO_ARGS_MIN + OF_RT_ARGS_MIN) {
1253 			/* rt_type */
1254 			conf->config |= be32_to_cpup(list++);
1255 			/* rt_delay */
1256 			conf->config |= be32_to_cpup(list++);
1257 			/* rt_clk */
1258 			if (nr_props > OF_GPIO_ARGS_MIN + OF_RT_ARGS_MIN)
1259 				conf->config |= be32_to_cpup(list++);
1260 		}
1261 		i++;
1262 	}
1263 
1264 out_put_node:
1265 	of_node_put(pins);
1266 
1267 	return ret;
1268 }
1269 
1270 static int st_pctl_parse_functions(struct device_node *np,
1271 			struct st_pinctrl *info, u32 index, int *grp_index)
1272 {
1273 	struct device *dev = info->dev;
1274 	struct device_node *child;
1275 	struct st_pmx_func *func;
1276 	struct st_pctl_group *grp;
1277 	int ret, i;
1278 
1279 	func = &info->functions[index];
1280 	func->name = np->name;
1281 	func->ngroups = of_get_child_count(np);
1282 	if (func->ngroups == 0)
1283 		return dev_err_probe(dev, -EINVAL, "No groups defined\n");
1284 	func->groups = devm_kcalloc(dev, func->ngroups, sizeof(*func->groups), GFP_KERNEL);
1285 	if (!func->groups)
1286 		return -ENOMEM;
1287 
1288 	i = 0;
1289 	for_each_child_of_node(np, child) {
1290 		func->groups[i] = child->name;
1291 		grp = &info->groups[*grp_index];
1292 		*grp_index += 1;
1293 		ret = st_pctl_dt_parse_groups(child, grp, info, i++);
1294 		if (ret) {
1295 			of_node_put(child);
1296 			return ret;
1297 		}
1298 	}
1299 	dev_info(dev, "Function[%d\t name:%s,\tgroups:%d]\n", index, func->name, func->ngroups);
1300 
1301 	return 0;
1302 }
1303 
1304 static void st_gpio_irq_mask(struct irq_data *d)
1305 {
1306 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1307 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
1308 
1309 	writel(BIT(irqd_to_hwirq(d)), bank->base + REG_PIO_CLR_PMASK);
1310 	gpiochip_disable_irq(gc, irqd_to_hwirq(d));
1311 }
1312 
1313 static void st_gpio_irq_unmask(struct irq_data *d)
1314 {
1315 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1316 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
1317 
1318 	gpiochip_enable_irq(gc, irqd_to_hwirq(d));
1319 	writel(BIT(irqd_to_hwirq(d)), bank->base + REG_PIO_SET_PMASK);
1320 }
1321 
1322 static int st_gpio_irq_request_resources(struct irq_data *d)
1323 {
1324 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1325 
1326 	pinctrl_gpio_direction_input(gc, d->hwirq);
1327 
1328 	return gpiochip_reqres_irq(gc, d->hwirq);
1329 }
1330 
1331 static void st_gpio_irq_release_resources(struct irq_data *d)
1332 {
1333 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1334 
1335 	gpiochip_relres_irq(gc, d->hwirq);
1336 }
1337 
1338 static int st_gpio_irq_set_type(struct irq_data *d, unsigned type)
1339 {
1340 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1341 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
1342 	unsigned long flags;
1343 	int comp, pin = d->hwirq;
1344 	u32 val;
1345 	u32 pin_edge_conf = 0;
1346 
1347 	switch (type) {
1348 	case IRQ_TYPE_LEVEL_HIGH:
1349 		comp = 0;
1350 		break;
1351 	case IRQ_TYPE_EDGE_FALLING:
1352 		comp = 0;
1353 		pin_edge_conf = ST_IRQ_FALLING_EDGE_CONF(pin);
1354 		break;
1355 	case IRQ_TYPE_LEVEL_LOW:
1356 		comp = 1;
1357 		break;
1358 	case IRQ_TYPE_EDGE_RISING:
1359 		comp = 1;
1360 		pin_edge_conf = ST_IRQ_RISING_EDGE_CONF(pin);
1361 		break;
1362 	case IRQ_TYPE_EDGE_BOTH:
1363 		comp = st_gpio_get(&bank->gpio_chip, pin);
1364 		pin_edge_conf = ST_IRQ_BOTH_EDGE_CONF(pin);
1365 		break;
1366 	default:
1367 		return -EINVAL;
1368 	}
1369 
1370 	spin_lock_irqsave(&bank->lock, flags);
1371 	bank->irq_edge_conf &=  ~(ST_IRQ_EDGE_MASK << (
1372 				pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN));
1373 	bank->irq_edge_conf |= pin_edge_conf;
1374 	spin_unlock_irqrestore(&bank->lock, flags);
1375 
1376 	val = readl(bank->base + REG_PIO_PCOMP);
1377 	val &= ~BIT(pin);
1378 	val |= (comp << pin);
1379 	writel(val, bank->base + REG_PIO_PCOMP);
1380 
1381 	return 0;
1382 }
1383 
1384 /*
1385  * As edge triggers are not supported at hardware level, it is supported by
1386  * software by exploiting the level trigger support in hardware.
1387  *
1388  * Steps for detection raising edge interrupt in software.
1389  *
1390  * Step 1: CONFIGURE pin to detect level LOW interrupts.
1391  *
1392  * Step 2: DETECT level LOW interrupt and in irqmux/gpio bank interrupt handler,
1393  * if the value of pin is low, then CONFIGURE pin for level HIGH interrupt.
1394  * IGNORE calling the actual interrupt handler for the pin at this stage.
1395  *
1396  * Step 3: DETECT level HIGH interrupt and in irqmux/gpio-bank interrupt handler
1397  * if the value of pin is HIGH, CONFIGURE pin for level LOW interrupt and then
1398  * DISPATCH the interrupt to the interrupt handler of the pin.
1399  *
1400  *		 step-1  ________     __________
1401  *				|     | step - 3
1402  *			        |     |
1403  *			step -2 |_____|
1404  *
1405  * falling edge is also detected int the same way.
1406  *
1407  */
1408 static void __gpio_irq_handler(struct st_gpio_bank *bank)
1409 {
1410 	unsigned long port_in, port_mask, port_comp, active_irqs;
1411 	unsigned long bank_edge_mask, flags;
1412 	int n, val, ecfg;
1413 
1414 	spin_lock_irqsave(&bank->lock, flags);
1415 	bank_edge_mask = bank->irq_edge_conf;
1416 	spin_unlock_irqrestore(&bank->lock, flags);
1417 
1418 	for (;;) {
1419 		port_in = readl(bank->base + REG_PIO_PIN);
1420 		port_comp = readl(bank->base + REG_PIO_PCOMP);
1421 		port_mask = readl(bank->base + REG_PIO_PMASK);
1422 
1423 		active_irqs = (port_in ^ port_comp) & port_mask;
1424 
1425 		if (active_irqs == 0)
1426 			break;
1427 
1428 		for_each_set_bit(n, &active_irqs, BITS_PER_LONG) {
1429 			/* check if we are detecting fake edges ... */
1430 			ecfg = ST_IRQ_EDGE_CONF(bank_edge_mask, n);
1431 
1432 			if (ecfg) {
1433 				/* edge detection. */
1434 				val = st_gpio_get(&bank->gpio_chip, n);
1435 
1436 				writel(BIT(n),
1437 					val ? bank->base + REG_PIO_SET_PCOMP :
1438 					bank->base + REG_PIO_CLR_PCOMP);
1439 
1440 				if (ecfg != ST_IRQ_EDGE_BOTH &&
1441 					!((ecfg & ST_IRQ_EDGE_FALLING) ^ val))
1442 					continue;
1443 			}
1444 
1445 			generic_handle_domain_irq(bank->gpio_chip.irq.domain, n);
1446 		}
1447 	}
1448 }
1449 
1450 static void st_gpio_irq_handler(struct irq_desc *desc)
1451 {
1452 	/* interrupt dedicated per bank */
1453 	struct irq_chip *chip = irq_desc_get_chip(desc);
1454 	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
1455 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
1456 
1457 	chained_irq_enter(chip, desc);
1458 	__gpio_irq_handler(bank);
1459 	chained_irq_exit(chip, desc);
1460 }
1461 
1462 static void st_gpio_irqmux_handler(struct irq_desc *desc)
1463 {
1464 	struct irq_chip *chip = irq_desc_get_chip(desc);
1465 	struct st_pinctrl *info = irq_desc_get_handler_data(desc);
1466 	unsigned long status;
1467 	int n;
1468 
1469 	chained_irq_enter(chip, desc);
1470 
1471 	status = readl(info->irqmux_base);
1472 
1473 	for_each_set_bit(n, &status, info->nbanks)
1474 		__gpio_irq_handler(&info->banks[n]);
1475 
1476 	chained_irq_exit(chip, desc);
1477 }
1478 
1479 static const struct gpio_chip st_gpio_template = {
1480 	.request		= gpiochip_generic_request,
1481 	.free			= gpiochip_generic_free,
1482 	.get			= st_gpio_get,
1483 	.set			= st_gpio_set,
1484 	.direction_input	= pinctrl_gpio_direction_input,
1485 	.direction_output	= st_gpio_direction_output,
1486 	.get_direction		= st_gpio_get_direction,
1487 	.ngpio			= ST_GPIO_PINS_PER_BANK,
1488 };
1489 
1490 static const struct irq_chip st_gpio_irqchip = {
1491 	.name			= "GPIO",
1492 	.irq_request_resources	= st_gpio_irq_request_resources,
1493 	.irq_release_resources	= st_gpio_irq_release_resources,
1494 	.irq_disable		= st_gpio_irq_mask,
1495 	.irq_mask		= st_gpio_irq_mask,
1496 	.irq_unmask		= st_gpio_irq_unmask,
1497 	.irq_set_type		= st_gpio_irq_set_type,
1498 	.flags			= IRQCHIP_SKIP_SET_WAKE | IRQCHIP_IMMUTABLE,
1499 };
1500 
1501 static int st_gpiolib_register_bank(struct st_pinctrl *info,
1502 	int bank_nr, struct device_node *np)
1503 {
1504 	struct st_gpio_bank *bank = &info->banks[bank_nr];
1505 	struct pinctrl_gpio_range *range = &bank->range;
1506 	struct device *dev = info->dev;
1507 	int bank_num = of_alias_get_id(np, "gpio");
1508 	struct resource res, irq_res;
1509 	int err;
1510 
1511 	if (of_address_to_resource(np, 0, &res))
1512 		return -ENODEV;
1513 
1514 	bank->base = devm_ioremap_resource(dev, &res);
1515 	if (IS_ERR(bank->base))
1516 		return PTR_ERR(bank->base);
1517 
1518 	bank->gpio_chip = st_gpio_template;
1519 	bank->gpio_chip.base = bank_num * ST_GPIO_PINS_PER_BANK;
1520 	bank->gpio_chip.ngpio = ST_GPIO_PINS_PER_BANK;
1521 	bank->gpio_chip.fwnode = of_fwnode_handle(np);
1522 	bank->gpio_chip.parent = dev;
1523 	spin_lock_init(&bank->lock);
1524 
1525 	of_property_read_string(np, "st,bank-name", &range->name);
1526 	bank->gpio_chip.label = range->name;
1527 
1528 	range->id = bank_num;
1529 	range->pin_base = range->base = range->id * ST_GPIO_PINS_PER_BANK;
1530 	range->npins = bank->gpio_chip.ngpio;
1531 	range->gc = &bank->gpio_chip;
1532 
1533 	/**
1534 	 * GPIO bank can have one of the two possible types of
1535 	 * interrupt-wirings.
1536 	 *
1537 	 * First type is via irqmux, single interrupt is used by multiple
1538 	 * gpio banks. This reduces number of overall interrupts numbers
1539 	 * required. All these banks belong to a single pincontroller.
1540 	 *		  _________
1541 	 *		 |	   |----> [gpio-bank (n)    ]
1542 	 *		 |	   |----> [gpio-bank (n + 1)]
1543 	 *	[irqN]-- | irq-mux |----> [gpio-bank (n + 2)]
1544 	 *		 |	   |----> [gpio-bank (...  )]
1545 	 *		 |_________|----> [gpio-bank (n + 7)]
1546 	 *
1547 	 * Second type has a dedicated interrupt per each gpio bank.
1548 	 *
1549 	 *	[irqN]----> [gpio-bank (n)]
1550 	 */
1551 
1552 	if (of_irq_to_resource(np, 0, &irq_res) > 0) {
1553 		struct gpio_irq_chip *girq;
1554 		int gpio_irq = irq_res.start;
1555 
1556 		/* This is not a valid IRQ */
1557 		if (gpio_irq <= 0) {
1558 			dev_err(dev, "invalid IRQ for %pOF bank\n", np);
1559 			goto skip_irq;
1560 		}
1561 		/* We need to have a mux as well */
1562 		if (!info->irqmux_base) {
1563 			dev_err(dev, "no irqmux for %pOF bank\n", np);
1564 			goto skip_irq;
1565 		}
1566 
1567 		girq = &bank->gpio_chip.irq;
1568 		gpio_irq_chip_set_chip(girq, &st_gpio_irqchip);
1569 		girq->parent_handler = st_gpio_irq_handler;
1570 		girq->num_parents = 1;
1571 		girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
1572 					     GFP_KERNEL);
1573 		if (!girq->parents)
1574 			return -ENOMEM;
1575 		girq->parents[0] = gpio_irq;
1576 		girq->default_type = IRQ_TYPE_NONE;
1577 		girq->handler = handle_simple_irq;
1578 	}
1579 
1580 skip_irq:
1581 	err  = gpiochip_add_data(&bank->gpio_chip, bank);
1582 	if (err)
1583 		return dev_err_probe(dev, err, "Failed to add gpiochip(%d)!\n", bank_num);
1584 	dev_info(dev, "%s bank added.\n", range->name);
1585 
1586 	return 0;
1587 }
1588 
1589 static const struct of_device_id st_pctl_of_match[] = {
1590 	{ .compatible = "st,stih407-sbc-pinctrl", .data = &stih407_data},
1591 	{ .compatible = "st,stih407-front-pinctrl", .data = &stih407_data},
1592 	{ .compatible = "st,stih407-rear-pinctrl", .data = &stih407_data},
1593 	{ .compatible = "st,stih407-flash-pinctrl", .data = &stih407_flashdata},
1594 	{ /* sentinel */ }
1595 };
1596 
1597 static int st_pctl_probe_dt(struct platform_device *pdev,
1598 	struct pinctrl_desc *pctl_desc, struct st_pinctrl *info)
1599 {
1600 	struct device *dev = &pdev->dev;
1601 	int ret = 0;
1602 	int i = 0, j = 0, k = 0, bank;
1603 	struct pinctrl_pin_desc *pdesc;
1604 	struct device_node *np = dev->of_node;
1605 	struct device_node *child;
1606 	int grp_index = 0;
1607 	int irq = 0;
1608 
1609 	st_pctl_dt_child_count(info, np);
1610 	if (!info->nbanks)
1611 		return dev_err_probe(dev, -EINVAL, "you need at least one gpio bank\n");
1612 
1613 	dev_info(dev, "nbanks = %d\n", info->nbanks);
1614 	dev_info(dev, "nfunctions = %d\n", info->nfunctions);
1615 	dev_info(dev, "ngroups = %d\n", info->ngroups);
1616 
1617 	info->functions = devm_kcalloc(dev, info->nfunctions, sizeof(*info->functions), GFP_KERNEL);
1618 
1619 	info->groups = devm_kcalloc(dev, info->ngroups, sizeof(*info->groups), GFP_KERNEL);
1620 
1621 	info->banks = devm_kcalloc(dev, info->nbanks, sizeof(*info->banks), GFP_KERNEL);
1622 
1623 	if (!info->functions || !info->groups || !info->banks)
1624 		return -ENOMEM;
1625 
1626 	info->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
1627 	if (IS_ERR(info->regmap))
1628 		return dev_err_probe(dev, PTR_ERR(info->regmap), "No syscfg phandle specified\n");
1629 	info->data = of_match_node(st_pctl_of_match, np)->data;
1630 
1631 	irq = platform_get_irq(pdev, 0);
1632 
1633 	if (irq > 0) {
1634 		info->irqmux_base = devm_platform_ioremap_resource_byname(pdev, "irqmux");
1635 		if (IS_ERR(info->irqmux_base))
1636 			return PTR_ERR(info->irqmux_base);
1637 
1638 		irq_set_chained_handler_and_data(irq, st_gpio_irqmux_handler,
1639 						 info);
1640 	}
1641 
1642 	pctl_desc->npins = info->nbanks * ST_GPIO_PINS_PER_BANK;
1643 	pdesc =	devm_kcalloc(dev, pctl_desc->npins, sizeof(*pdesc), GFP_KERNEL);
1644 	if (!pdesc)
1645 		return -ENOMEM;
1646 
1647 	pctl_desc->pins = pdesc;
1648 
1649 	bank = 0;
1650 	for_each_child_of_node(np, child) {
1651 		if (of_property_read_bool(child, "gpio-controller")) {
1652 			const char *bank_name = NULL;
1653 			char **pin_names;
1654 
1655 			ret = st_gpiolib_register_bank(info, bank, child);
1656 			if (ret) {
1657 				of_node_put(child);
1658 				return ret;
1659 			}
1660 
1661 			k = info->banks[bank].range.pin_base;
1662 			bank_name = info->banks[bank].range.name;
1663 
1664 			pin_names = devm_kasprintf_strarray(dev, bank_name, ST_GPIO_PINS_PER_BANK);
1665 			if (IS_ERR(pin_names)) {
1666 				of_node_put(child);
1667 				return PTR_ERR(pin_names);
1668 			}
1669 
1670 			for (j = 0; j < ST_GPIO_PINS_PER_BANK; j++, k++) {
1671 				pdesc->number = k;
1672 				pdesc->name = pin_names[j];
1673 				pdesc++;
1674 			}
1675 			st_parse_syscfgs(info, bank, child);
1676 			bank++;
1677 		} else {
1678 			ret = st_pctl_parse_functions(child, info,
1679 							i++, &grp_index);
1680 			if (ret) {
1681 				dev_err(dev, "No functions found.\n");
1682 				of_node_put(child);
1683 				return ret;
1684 			}
1685 		}
1686 	}
1687 
1688 	return 0;
1689 }
1690 
1691 static int st_pctl_probe(struct platform_device *pdev)
1692 {
1693 	struct device *dev = &pdev->dev;
1694 	struct st_pinctrl *info;
1695 	struct pinctrl_desc *pctl_desc;
1696 	int ret, i;
1697 
1698 	if (!dev->of_node) {
1699 		dev_err(dev, "device node not found.\n");
1700 		return -EINVAL;
1701 	}
1702 
1703 	pctl_desc = devm_kzalloc(dev, sizeof(*pctl_desc), GFP_KERNEL);
1704 	if (!pctl_desc)
1705 		return -ENOMEM;
1706 
1707 	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
1708 	if (!info)
1709 		return -ENOMEM;
1710 
1711 	info->dev = dev;
1712 	platform_set_drvdata(pdev, info);
1713 	ret = st_pctl_probe_dt(pdev, pctl_desc, info);
1714 	if (ret)
1715 		return ret;
1716 
1717 	pctl_desc->owner	= THIS_MODULE;
1718 	pctl_desc->pctlops	= &st_pctlops;
1719 	pctl_desc->pmxops	= &st_pmxops;
1720 	pctl_desc->confops	= &st_confops;
1721 	pctl_desc->name		= dev_name(dev);
1722 
1723 	info->pctl = devm_pinctrl_register(dev, pctl_desc, info);
1724 	if (IS_ERR(info->pctl))
1725 		return dev_err_probe(dev, PTR_ERR(info->pctl), "Failed pinctrl registration\n");
1726 
1727 	for (i = 0; i < info->nbanks; i++)
1728 		pinctrl_add_gpio_range(info->pctl, &info->banks[i].range);
1729 
1730 	return 0;
1731 }
1732 
1733 static struct platform_driver st_pctl_driver = {
1734 	.driver = {
1735 		.name = "st-pinctrl",
1736 		.of_match_table = st_pctl_of_match,
1737 	},
1738 	.probe = st_pctl_probe,
1739 };
1740 
1741 static int __init st_pctl_init(void)
1742 {
1743 	return platform_driver_register(&st_pctl_driver);
1744 }
1745 arch_initcall(st_pctl_init);
1746