xref: /linux/drivers/pinctrl/pinctrl-st.c (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
3  * Authors:
4  *	Srinivas Kandagatla <srinivas.kandagatla@st.com>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 
11 #include <linux/init.h>
12 #include <linux/module.h>
13 #include <linux/slab.h>
14 #include <linux/err.h>
15 #include <linux/io.h>
16 #include <linux/of.h>
17 #include <linux/of_irq.h>
18 #include <linux/of_gpio.h>
19 #include <linux/of_address.h>
20 #include <linux/regmap.h>
21 #include <linux/mfd/syscon.h>
22 #include <linux/pinctrl/pinctrl.h>
23 #include <linux/pinctrl/pinmux.h>
24 #include <linux/pinctrl/pinconf.h>
25 #include <linux/platform_device.h>
26 #include "core.h"
27 
28 /* PIO Block registers */
29 /* PIO output */
30 #define REG_PIO_POUT			0x00
31 /* Set bits of POUT */
32 #define REG_PIO_SET_POUT		0x04
33 /* Clear bits of POUT */
34 #define REG_PIO_CLR_POUT		0x08
35 /* PIO input */
36 #define REG_PIO_PIN			0x10
37 /* PIO configuration */
38 #define REG_PIO_PC(n)			(0x20 + (n) * 0x10)
39 /* Set bits of PC[2:0] */
40 #define REG_PIO_SET_PC(n)		(0x24 + (n) * 0x10)
41 /* Clear bits of PC[2:0] */
42 #define REG_PIO_CLR_PC(n)		(0x28 + (n) * 0x10)
43 /* PIO input comparison */
44 #define REG_PIO_PCOMP			0x50
45 /* Set bits of PCOMP */
46 #define REG_PIO_SET_PCOMP		0x54
47 /* Clear bits of PCOMP */
48 #define REG_PIO_CLR_PCOMP		0x58
49 /* PIO input comparison mask */
50 #define REG_PIO_PMASK			0x60
51 /* Set bits of PMASK */
52 #define REG_PIO_SET_PMASK		0x64
53 /* Clear bits of PMASK */
54 #define REG_PIO_CLR_PMASK		0x68
55 
56 #define ST_GPIO_DIRECTION_BIDIR	0x1
57 #define ST_GPIO_DIRECTION_OUT	0x2
58 #define ST_GPIO_DIRECTION_IN	0x4
59 
60 /**
61  *  Packed style retime configuration.
62  *  There are two registers cfg0 and cfg1 in this style for each bank.
63  *  Each field in this register is 8 bit corresponding to 8 pins in the bank.
64  */
65 #define RT_P_CFGS_PER_BANK			2
66 #define RT_P_CFG0_CLK1NOTCLK0_FIELD(reg)	REG_FIELD(reg, 0, 7)
67 #define RT_P_CFG0_DELAY_0_FIELD(reg)		REG_FIELD(reg, 16, 23)
68 #define RT_P_CFG0_DELAY_1_FIELD(reg)		REG_FIELD(reg, 24, 31)
69 #define RT_P_CFG1_INVERTCLK_FIELD(reg)		REG_FIELD(reg, 0, 7)
70 #define RT_P_CFG1_RETIME_FIELD(reg)		REG_FIELD(reg, 8, 15)
71 #define RT_P_CFG1_CLKNOTDATA_FIELD(reg)		REG_FIELD(reg, 16, 23)
72 #define RT_P_CFG1_DOUBLE_EDGE_FIELD(reg)	REG_FIELD(reg, 24, 31)
73 
74 /**
75  * Dedicated style retime Configuration register
76  * each register is dedicated per pin.
77  */
78 #define RT_D_CFGS_PER_BANK		8
79 #define RT_D_CFG_CLK_SHIFT		0
80 #define RT_D_CFG_CLK_MASK		(0x3 << 0)
81 #define RT_D_CFG_CLKNOTDATA_SHIFT	2
82 #define RT_D_CFG_CLKNOTDATA_MASK	BIT(2)
83 #define RT_D_CFG_DELAY_SHIFT		3
84 #define RT_D_CFG_DELAY_MASK		(0xf << 3)
85 #define RT_D_CFG_DELAY_INNOTOUT_SHIFT	7
86 #define RT_D_CFG_DELAY_INNOTOUT_MASK	BIT(7)
87 #define RT_D_CFG_DOUBLE_EDGE_SHIFT	8
88 #define RT_D_CFG_DOUBLE_EDGE_MASK	BIT(8)
89 #define RT_D_CFG_INVERTCLK_SHIFT	9
90 #define RT_D_CFG_INVERTCLK_MASK		BIT(9)
91 #define RT_D_CFG_RETIME_SHIFT		10
92 #define RT_D_CFG_RETIME_MASK		BIT(10)
93 
94 /*
95  * Pinconf is represented in an opaque unsigned long variable.
96  * Below is the bit allocation details for each possible configuration.
97  * All the bit fields can be encapsulated into four variables
98  * (direction, retime-type, retime-clk, retime-delay)
99  *
100  *	 +----------------+
101  *[31:28]| reserved-3     |
102  *	 +----------------+-------------
103  *[27]   |	oe	  |		|
104  *	 +----------------+		v
105  *[26]   |	pu	  |	[Direction	]
106  *	 +----------------+		^
107  *[25]   |	od	  |		|
108  *	 +----------------+-------------
109  *[24]   | reserved-2     |
110  *	 +----------------+-------------
111  *[23]   |    retime      |		|
112  *	 +----------------+		|
113  *[22]   | retime-invclk  |		|
114  *	 +----------------+		v
115  *[21]   |retime-clknotdat|	[Retime-type	]
116  *	 +----------------+		^
117  *[20]   | retime-de      |		|
118  *	 +----------------+-------------
119  *[19:18]| retime-clk     |------>[Retime-Clk	]
120  *	 +----------------+
121  *[17:16]|  reserved-1    |
122  *	 +----------------+
123  *[15..0]| retime-delay   |------>[Retime Delay]
124  *	 +----------------+
125  */
126 
127 #define ST_PINCONF_UNPACK(conf, param)\
128 				((conf >> ST_PINCONF_ ##param ##_SHIFT) \
129 				& ST_PINCONF_ ##param ##_MASK)
130 
131 #define ST_PINCONF_PACK(conf, val, param)	(conf |=\
132 				((val & ST_PINCONF_ ##param ##_MASK) << \
133 					ST_PINCONF_ ##param ##_SHIFT))
134 
135 /* Output enable */
136 #define ST_PINCONF_OE_MASK		0x1
137 #define ST_PINCONF_OE_SHIFT		27
138 #define ST_PINCONF_OE			BIT(27)
139 #define ST_PINCONF_UNPACK_OE(conf)	ST_PINCONF_UNPACK(conf, OE)
140 #define ST_PINCONF_PACK_OE(conf)	ST_PINCONF_PACK(conf, 1, OE)
141 
142 /* Pull Up */
143 #define ST_PINCONF_PU_MASK		0x1
144 #define ST_PINCONF_PU_SHIFT		26
145 #define ST_PINCONF_PU			BIT(26)
146 #define ST_PINCONF_UNPACK_PU(conf)	ST_PINCONF_UNPACK(conf, PU)
147 #define ST_PINCONF_PACK_PU(conf)	ST_PINCONF_PACK(conf, 1, PU)
148 
149 /* Open Drain */
150 #define ST_PINCONF_OD_MASK		0x1
151 #define ST_PINCONF_OD_SHIFT		25
152 #define ST_PINCONF_OD			BIT(25)
153 #define ST_PINCONF_UNPACK_OD(conf)	ST_PINCONF_UNPACK(conf, OD)
154 #define ST_PINCONF_PACK_OD(conf)	ST_PINCONF_PACK(conf, 1, OD)
155 
156 #define ST_PINCONF_RT_MASK		0x1
157 #define ST_PINCONF_RT_SHIFT		23
158 #define ST_PINCONF_RT			BIT(23)
159 #define ST_PINCONF_UNPACK_RT(conf)	ST_PINCONF_UNPACK(conf, RT)
160 #define ST_PINCONF_PACK_RT(conf)	ST_PINCONF_PACK(conf, 1, RT)
161 
162 #define ST_PINCONF_RT_INVERTCLK_MASK	0x1
163 #define ST_PINCONF_RT_INVERTCLK_SHIFT	22
164 #define ST_PINCONF_RT_INVERTCLK		BIT(22)
165 #define ST_PINCONF_UNPACK_RT_INVERTCLK(conf) \
166 			ST_PINCONF_UNPACK(conf, RT_INVERTCLK)
167 #define ST_PINCONF_PACK_RT_INVERTCLK(conf) \
168 			ST_PINCONF_PACK(conf, 1, RT_INVERTCLK)
169 
170 #define ST_PINCONF_RT_CLKNOTDATA_MASK	0x1
171 #define ST_PINCONF_RT_CLKNOTDATA_SHIFT	21
172 #define ST_PINCONF_RT_CLKNOTDATA	BIT(21)
173 #define ST_PINCONF_UNPACK_RT_CLKNOTDATA(conf)	\
174 				ST_PINCONF_UNPACK(conf, RT_CLKNOTDATA)
175 #define ST_PINCONF_PACK_RT_CLKNOTDATA(conf) \
176 				ST_PINCONF_PACK(conf, 1, RT_CLKNOTDATA)
177 
178 #define ST_PINCONF_RT_DOUBLE_EDGE_MASK	0x1
179 #define ST_PINCONF_RT_DOUBLE_EDGE_SHIFT	20
180 #define ST_PINCONF_RT_DOUBLE_EDGE	BIT(20)
181 #define ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(conf) \
182 				ST_PINCONF_UNPACK(conf, RT_DOUBLE_EDGE)
183 #define ST_PINCONF_PACK_RT_DOUBLE_EDGE(conf) \
184 				ST_PINCONF_PACK(conf, 1, RT_DOUBLE_EDGE)
185 
186 #define ST_PINCONF_RT_CLK_MASK		0x3
187 #define ST_PINCONF_RT_CLK_SHIFT		18
188 #define ST_PINCONF_RT_CLK		BIT(18)
189 #define ST_PINCONF_UNPACK_RT_CLK(conf)	ST_PINCONF_UNPACK(conf, RT_CLK)
190 #define ST_PINCONF_PACK_RT_CLK(conf, val) ST_PINCONF_PACK(conf, val, RT_CLK)
191 
192 /* RETIME_DELAY in Pico Secs */
193 #define ST_PINCONF_RT_DELAY_MASK	0xffff
194 #define ST_PINCONF_RT_DELAY_SHIFT	0
195 #define ST_PINCONF_UNPACK_RT_DELAY(conf) ST_PINCONF_UNPACK(conf, RT_DELAY)
196 #define ST_PINCONF_PACK_RT_DELAY(conf, val) \
197 				ST_PINCONF_PACK(conf, val, RT_DELAY)
198 
199 #define ST_GPIO_PINS_PER_BANK	(8)
200 #define OF_GPIO_ARGS_MIN	(4)
201 #define OF_RT_ARGS_MIN		(2)
202 
203 #define gpio_range_to_bank(chip) \
204 		container_of(chip, struct st_gpio_bank, range)
205 
206 #define gpio_chip_to_bank(chip) \
207 		container_of(chip, struct st_gpio_bank, gpio_chip)
208 
209 #define pc_to_bank(pc) \
210 		container_of(pc, struct st_gpio_bank, pc)
211 
212 enum st_retime_style {
213 	st_retime_style_none,
214 	st_retime_style_packed,
215 	st_retime_style_dedicated,
216 };
217 
218 struct st_retime_dedicated {
219 	struct regmap_field *rt[ST_GPIO_PINS_PER_BANK];
220 };
221 
222 struct st_retime_packed {
223 	struct regmap_field *clk1notclk0;
224 	struct regmap_field *delay_0;
225 	struct regmap_field *delay_1;
226 	struct regmap_field *invertclk;
227 	struct regmap_field *retime;
228 	struct regmap_field *clknotdata;
229 	struct regmap_field *double_edge;
230 };
231 
232 struct st_pio_control {
233 	u32 rt_pin_mask;
234 	struct regmap_field *alt, *oe, *pu, *od;
235 	/* retiming */
236 	union {
237 		struct st_retime_packed		rt_p;
238 		struct st_retime_dedicated	rt_d;
239 	} rt;
240 };
241 
242 struct st_pctl_data {
243 	const enum st_retime_style	rt_style;
244 	const unsigned int		*input_delays;
245 	const int			ninput_delays;
246 	const unsigned int		*output_delays;
247 	const int			noutput_delays;
248 	/* register offset information */
249 	const int alt, oe, pu, od, rt;
250 };
251 
252 struct st_pinconf {
253 	int		pin;
254 	const char	*name;
255 	unsigned long	config;
256 	int		altfunc;
257 };
258 
259 struct st_pmx_func {
260 	const char	*name;
261 	const char	**groups;
262 	unsigned	ngroups;
263 };
264 
265 struct st_pctl_group {
266 	const char		*name;
267 	unsigned int		*pins;
268 	unsigned		npins;
269 	struct st_pinconf	*pin_conf;
270 };
271 
272 /*
273  * Edge triggers are not supported at hardware level, it is supported by
274  * software by exploiting the level trigger support in hardware.
275  * Software uses a virtual register (EDGE_CONF) for edge trigger configuration
276  * of each gpio pin in a GPIO bank.
277  *
278  * Each bank has a 32 bit EDGE_CONF register which is divided in to 8 parts of
279  * 4-bits. Each 4-bit space is allocated for each pin in a gpio bank.
280  *
281  * bit allocation per pin is:
282  * Bits:  [0 - 3] | [4 - 7]  [8 - 11] ... ... ... ...  [ 28 - 31]
283  *       --------------------------------------------------------
284  *       |  pin-0  |  pin-2 | pin-3  | ... ... ... ... | pin -7 |
285  *       --------------------------------------------------------
286  *
287  *  A pin can have one of following the values in its edge configuration field.
288  *
289  *	-------   ----------------------------
290  *	[0-3]	- Description
291  *	-------   ----------------------------
292  *	0000	- No edge IRQ.
293  *	0001	- Falling edge IRQ.
294  *	0010	- Rising edge IRQ.
295  *	0011	- Rising and Falling edge IRQ.
296  *	-------   ----------------------------
297  */
298 
299 #define ST_IRQ_EDGE_CONF_BITS_PER_PIN	4
300 #define ST_IRQ_EDGE_MASK		0xf
301 #define ST_IRQ_EDGE_FALLING		BIT(0)
302 #define ST_IRQ_EDGE_RISING		BIT(1)
303 #define ST_IRQ_EDGE_BOTH		(BIT(0) | BIT(1))
304 
305 #define ST_IRQ_RISING_EDGE_CONF(pin) \
306 	(ST_IRQ_EDGE_RISING << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
307 
308 #define ST_IRQ_FALLING_EDGE_CONF(pin) \
309 	(ST_IRQ_EDGE_FALLING << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
310 
311 #define ST_IRQ_BOTH_EDGE_CONF(pin) \
312 	(ST_IRQ_EDGE_BOTH << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
313 
314 #define ST_IRQ_EDGE_CONF(conf, pin) \
315 	(conf >> (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN) & ST_IRQ_EDGE_MASK)
316 
317 struct st_gpio_bank {
318 	struct gpio_chip		gpio_chip;
319 	struct pinctrl_gpio_range	range;
320 	void __iomem			*base;
321 	struct st_pio_control		pc;
322 	unsigned long			irq_edge_conf;
323 	spinlock_t                      lock;
324 };
325 
326 struct st_pinctrl {
327 	struct device			*dev;
328 	struct pinctrl_dev		*pctl;
329 	struct st_gpio_bank		*banks;
330 	int				nbanks;
331 	struct st_pmx_func		*functions;
332 	int				nfunctions;
333 	struct st_pctl_group		*groups;
334 	int				ngroups;
335 	struct regmap			*regmap;
336 	const struct st_pctl_data	*data;
337 	void __iomem			*irqmux_base;
338 };
339 
340 /* SOC specific data */
341 /* STiH415 data */
342 static const unsigned int stih415_input_delays[] = {0, 500, 1000, 1500};
343 static const unsigned int stih415_output_delays[] = {0, 1000, 2000, 3000};
344 
345 #define STIH415_PCTRL_COMMON_DATA				\
346 	.rt_style	= st_retime_style_packed,		\
347 	.input_delays	= stih415_input_delays,			\
348 	.ninput_delays	= ARRAY_SIZE(stih415_input_delays),	\
349 	.output_delays = stih415_output_delays,			\
350 	.noutput_delays = ARRAY_SIZE(stih415_output_delays)
351 
352 static const struct st_pctl_data  stih415_sbc_data = {
353 	STIH415_PCTRL_COMMON_DATA,
354 	.alt = 0, .oe = 5, .pu = 7, .od = 9, .rt = 16,
355 };
356 
357 static const struct st_pctl_data  stih415_front_data = {
358 	STIH415_PCTRL_COMMON_DATA,
359 	.alt = 0, .oe = 8, .pu = 10, .od = 12, .rt = 16,
360 };
361 
362 static const struct st_pctl_data  stih415_rear_data = {
363 	STIH415_PCTRL_COMMON_DATA,
364 	.alt = 0, .oe = 6, .pu = 8, .od = 10, .rt = 38,
365 };
366 
367 static const struct st_pctl_data  stih415_left_data = {
368 	STIH415_PCTRL_COMMON_DATA,
369 	.alt = 0, .oe = 3, .pu = 4, .od = 5, .rt = 6,
370 };
371 
372 static const struct st_pctl_data  stih415_right_data = {
373 	STIH415_PCTRL_COMMON_DATA,
374 	.alt = 0, .oe = 5, .pu = 7, .od = 9, .rt = 11,
375 };
376 
377 /* STiH416 data */
378 static const unsigned int stih416_delays[] = {0, 300, 500, 750, 1000, 1250,
379 			1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250 };
380 
381 static const struct st_pctl_data  stih416_data = {
382 	.rt_style	= st_retime_style_dedicated,
383 	.input_delays	= stih416_delays,
384 	.ninput_delays	= ARRAY_SIZE(stih416_delays),
385 	.output_delays	= stih416_delays,
386 	.noutput_delays = ARRAY_SIZE(stih416_delays),
387 	.alt = 0, .oe = 40, .pu = 50, .od = 60, .rt = 100,
388 };
389 
390 static const struct st_pctl_data stih407_flashdata = {
391 	.rt_style	= st_retime_style_none,
392 	.input_delays	= stih416_delays,
393 	.ninput_delays	= ARRAY_SIZE(stih416_delays),
394 	.output_delays	= stih416_delays,
395 	.noutput_delays = ARRAY_SIZE(stih416_delays),
396 	.alt = 0,
397 	.oe = -1, /* Not Available */
398 	.pu = -1, /* Not Available */
399 	.od = 60,
400 	.rt = 100,
401 };
402 
403 static struct st_pio_control *st_get_pio_control(
404 			struct pinctrl_dev *pctldev, int pin)
405 {
406 	struct pinctrl_gpio_range *range =
407 			 pinctrl_find_gpio_range_from_pin(pctldev, pin);
408 	struct st_gpio_bank *bank = gpio_range_to_bank(range);
409 
410 	return &bank->pc;
411 }
412 
413 /* Low level functions.. */
414 static inline int st_gpio_bank(int gpio)
415 {
416 	return gpio/ST_GPIO_PINS_PER_BANK;
417 }
418 
419 static inline int st_gpio_pin(int gpio)
420 {
421 	return gpio%ST_GPIO_PINS_PER_BANK;
422 }
423 
424 static void st_pinconf_set_config(struct st_pio_control *pc,
425 				int pin, unsigned long config)
426 {
427 	struct regmap_field *output_enable = pc->oe;
428 	struct regmap_field *pull_up = pc->pu;
429 	struct regmap_field *open_drain = pc->od;
430 	unsigned int oe_value, pu_value, od_value;
431 	unsigned long mask = BIT(pin);
432 
433 	if (output_enable) {
434 		regmap_field_read(output_enable, &oe_value);
435 		oe_value &= ~mask;
436 		if (config & ST_PINCONF_OE)
437 			oe_value |= mask;
438 		regmap_field_write(output_enable, oe_value);
439 	}
440 
441 	if (pull_up) {
442 		regmap_field_read(pull_up, &pu_value);
443 		pu_value &= ~mask;
444 		if (config & ST_PINCONF_PU)
445 			pu_value |= mask;
446 		regmap_field_write(pull_up, pu_value);
447 	}
448 
449 	if (open_drain) {
450 		regmap_field_read(open_drain, &od_value);
451 		od_value &= ~mask;
452 		if (config & ST_PINCONF_OD)
453 			od_value |= mask;
454 		regmap_field_write(open_drain, od_value);
455 	}
456 }
457 
458 static void st_pctl_set_function(struct st_pio_control *pc,
459 				int pin_id, int function)
460 {
461 	struct regmap_field *alt = pc->alt;
462 	unsigned int val;
463 	int pin = st_gpio_pin(pin_id);
464 	int offset = pin * 4;
465 
466 	if (!alt)
467 		return;
468 
469 	regmap_field_read(alt, &val);
470 	val &= ~(0xf << offset);
471 	val |= function << offset;
472 	regmap_field_write(alt, val);
473 }
474 
475 static unsigned int st_pctl_get_pin_function(struct st_pio_control *pc, int pin)
476 {
477 	struct regmap_field *alt = pc->alt;
478 	unsigned int val;
479 	int offset = pin * 4;
480 
481 	if (!alt)
482 		return 0;
483 
484 	regmap_field_read(alt, &val);
485 
486 	return (val >> offset) & 0xf;
487 }
488 
489 static unsigned long st_pinconf_delay_to_bit(unsigned int delay,
490 	const struct st_pctl_data *data, unsigned long config)
491 {
492 	const unsigned int *delay_times;
493 	int num_delay_times, i, closest_index = -1;
494 	unsigned int closest_divergence = UINT_MAX;
495 
496 	if (ST_PINCONF_UNPACK_OE(config)) {
497 		delay_times = data->output_delays;
498 		num_delay_times = data->noutput_delays;
499 	} else {
500 		delay_times = data->input_delays;
501 		num_delay_times = data->ninput_delays;
502 	}
503 
504 	for (i = 0; i < num_delay_times; i++) {
505 		unsigned int divergence = abs(delay - delay_times[i]);
506 
507 		if (divergence == 0)
508 			return i;
509 
510 		if (divergence < closest_divergence) {
511 			closest_divergence = divergence;
512 			closest_index = i;
513 		}
514 	}
515 
516 	pr_warn("Attempt to set delay %d, closest available %d\n",
517 	     delay, delay_times[closest_index]);
518 
519 	return closest_index;
520 }
521 
522 static unsigned long st_pinconf_bit_to_delay(unsigned int index,
523 	const struct st_pctl_data *data, unsigned long output)
524 {
525 	const unsigned int *delay_times;
526 	int num_delay_times;
527 
528 	if (output) {
529 		delay_times = data->output_delays;
530 		num_delay_times = data->noutput_delays;
531 	} else {
532 		delay_times = data->input_delays;
533 		num_delay_times = data->ninput_delays;
534 	}
535 
536 	if (index < num_delay_times) {
537 		return delay_times[index];
538 	} else {
539 		pr_warn("Delay not found in/out delay list\n");
540 		return 0;
541 	}
542 }
543 
544 static void st_regmap_field_bit_set_clear_pin(struct regmap_field *field,
545 	int enable, int pin)
546 {
547 	unsigned int val = 0;
548 
549 	regmap_field_read(field, &val);
550 	if (enable)
551 		val |= BIT(pin);
552 	else
553 		val &= ~BIT(pin);
554 	regmap_field_write(field, val);
555 }
556 
557 static void st_pinconf_set_retime_packed(struct st_pinctrl *info,
558 	struct st_pio_control *pc,	unsigned long config, int pin)
559 {
560 	const struct st_pctl_data *data = info->data;
561 	struct st_retime_packed *rt_p = &pc->rt.rt_p;
562 	unsigned int delay;
563 
564 	st_regmap_field_bit_set_clear_pin(rt_p->clk1notclk0,
565 				ST_PINCONF_UNPACK_RT_CLK(config), pin);
566 
567 	st_regmap_field_bit_set_clear_pin(rt_p->clknotdata,
568 				ST_PINCONF_UNPACK_RT_CLKNOTDATA(config), pin);
569 
570 	st_regmap_field_bit_set_clear_pin(rt_p->double_edge,
571 				ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config), pin);
572 
573 	st_regmap_field_bit_set_clear_pin(rt_p->invertclk,
574 				ST_PINCONF_UNPACK_RT_INVERTCLK(config), pin);
575 
576 	st_regmap_field_bit_set_clear_pin(rt_p->retime,
577 				ST_PINCONF_UNPACK_RT(config), pin);
578 
579 	delay = st_pinconf_delay_to_bit(ST_PINCONF_UNPACK_RT_DELAY(config),
580 					data, config);
581 	/* 2 bit delay, lsb */
582 	st_regmap_field_bit_set_clear_pin(rt_p->delay_0, delay & 0x1, pin);
583 	/* 2 bit delay, msb */
584 	st_regmap_field_bit_set_clear_pin(rt_p->delay_1, delay & 0x2, pin);
585 
586 }
587 
588 static void st_pinconf_set_retime_dedicated(struct st_pinctrl *info,
589 	struct st_pio_control *pc, unsigned long config, int pin)
590 {
591 	int input	= ST_PINCONF_UNPACK_OE(config) ? 0 : 1;
592 	int clk		= ST_PINCONF_UNPACK_RT_CLK(config);
593 	int clknotdata	= ST_PINCONF_UNPACK_RT_CLKNOTDATA(config);
594 	int double_edge	= ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config);
595 	int invertclk	= ST_PINCONF_UNPACK_RT_INVERTCLK(config);
596 	int retime	= ST_PINCONF_UNPACK_RT(config);
597 
598 	unsigned long delay = st_pinconf_delay_to_bit(
599 			ST_PINCONF_UNPACK_RT_DELAY(config),
600 			info->data, config);
601 	struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
602 
603 	unsigned long retime_config =
604 		((clk) << RT_D_CFG_CLK_SHIFT) |
605 		((delay) << RT_D_CFG_DELAY_SHIFT) |
606 		((input) << RT_D_CFG_DELAY_INNOTOUT_SHIFT) |
607 		((retime) << RT_D_CFG_RETIME_SHIFT) |
608 		((clknotdata) << RT_D_CFG_CLKNOTDATA_SHIFT) |
609 		((invertclk) << RT_D_CFG_INVERTCLK_SHIFT) |
610 		((double_edge) << RT_D_CFG_DOUBLE_EDGE_SHIFT);
611 
612 	regmap_field_write(rt_d->rt[pin], retime_config);
613 }
614 
615 static void st_pinconf_get_direction(struct st_pio_control *pc,
616 	int pin, unsigned long *config)
617 {
618 	unsigned int oe_value, pu_value, od_value;
619 
620 	if (pc->oe) {
621 		regmap_field_read(pc->oe, &oe_value);
622 		if (oe_value & BIT(pin))
623 			ST_PINCONF_PACK_OE(*config);
624 	}
625 
626 	if (pc->pu) {
627 		regmap_field_read(pc->pu, &pu_value);
628 		if (pu_value & BIT(pin))
629 			ST_PINCONF_PACK_PU(*config);
630 	}
631 
632 	if (pc->od) {
633 		regmap_field_read(pc->od, &od_value);
634 		if (od_value & BIT(pin))
635 			ST_PINCONF_PACK_OD(*config);
636 	}
637 }
638 
639 static int st_pinconf_get_retime_packed(struct st_pinctrl *info,
640 	struct st_pio_control *pc,	int pin, unsigned long *config)
641 {
642 	const struct st_pctl_data *data = info->data;
643 	struct st_retime_packed *rt_p = &pc->rt.rt_p;
644 	unsigned int delay_bits, delay, delay0, delay1, val;
645 	int output = ST_PINCONF_UNPACK_OE(*config);
646 
647 	if (!regmap_field_read(rt_p->retime, &val) && (val & BIT(pin)))
648 		ST_PINCONF_PACK_RT(*config);
649 
650 	if (!regmap_field_read(rt_p->clk1notclk0, &val) && (val & BIT(pin)))
651 		ST_PINCONF_PACK_RT_CLK(*config, 1);
652 
653 	if (!regmap_field_read(rt_p->clknotdata, &val) && (val & BIT(pin)))
654 		ST_PINCONF_PACK_RT_CLKNOTDATA(*config);
655 
656 	if (!regmap_field_read(rt_p->double_edge, &val) && (val & BIT(pin)))
657 		ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config);
658 
659 	if (!regmap_field_read(rt_p->invertclk, &val) && (val & BIT(pin)))
660 		ST_PINCONF_PACK_RT_INVERTCLK(*config);
661 
662 	regmap_field_read(rt_p->delay_0, &delay0);
663 	regmap_field_read(rt_p->delay_1, &delay1);
664 	delay_bits = (((delay1 & BIT(pin)) ? 1 : 0) << 1) |
665 			(((delay0 & BIT(pin)) ? 1 : 0));
666 	delay =  st_pinconf_bit_to_delay(delay_bits, data, output);
667 	ST_PINCONF_PACK_RT_DELAY(*config, delay);
668 
669 	return 0;
670 }
671 
672 static int st_pinconf_get_retime_dedicated(struct st_pinctrl *info,
673 	struct st_pio_control *pc,	int pin, unsigned long *config)
674 {
675 	unsigned int value;
676 	unsigned long delay_bits, delay, rt_clk;
677 	int output = ST_PINCONF_UNPACK_OE(*config);
678 	struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
679 
680 	regmap_field_read(rt_d->rt[pin], &value);
681 
682 	rt_clk = (value & RT_D_CFG_CLK_MASK) >> RT_D_CFG_CLK_SHIFT;
683 	ST_PINCONF_PACK_RT_CLK(*config, rt_clk);
684 
685 	delay_bits = (value & RT_D_CFG_DELAY_MASK) >> RT_D_CFG_DELAY_SHIFT;
686 	delay =  st_pinconf_bit_to_delay(delay_bits, info->data, output);
687 	ST_PINCONF_PACK_RT_DELAY(*config, delay);
688 
689 	if (value & RT_D_CFG_CLKNOTDATA_MASK)
690 		ST_PINCONF_PACK_RT_CLKNOTDATA(*config);
691 
692 	if (value & RT_D_CFG_DOUBLE_EDGE_MASK)
693 		ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config);
694 
695 	if (value & RT_D_CFG_INVERTCLK_MASK)
696 		ST_PINCONF_PACK_RT_INVERTCLK(*config);
697 
698 	if (value & RT_D_CFG_RETIME_MASK)
699 		ST_PINCONF_PACK_RT(*config);
700 
701 	return 0;
702 }
703 
704 /* GPIO related functions */
705 
706 static inline void __st_gpio_set(struct st_gpio_bank *bank,
707 	unsigned offset, int value)
708 {
709 	if (value)
710 		writel(BIT(offset), bank->base + REG_PIO_SET_POUT);
711 	else
712 		writel(BIT(offset), bank->base + REG_PIO_CLR_POUT);
713 }
714 
715 static void st_gpio_direction(struct st_gpio_bank *bank,
716 		unsigned int gpio, unsigned int direction)
717 {
718 	int offset = st_gpio_pin(gpio);
719 	int i = 0;
720 	/**
721 	 * There are three configuration registers (PIOn_PC0, PIOn_PC1
722 	 * and PIOn_PC2) for each port. These are used to configure the
723 	 * PIO port pins. Each pin can be configured as an input, output,
724 	 * bidirectional, or alternative function pin. Three bits, one bit
725 	 * from each of the three registers, configure the corresponding bit of
726 	 * the port. Valid bit settings is:
727 	 *
728 	 * PC2		PC1		PC0	Direction.
729 	 * 0		0		0	[Input Weak pull-up]
730 	 * 0		0 or 1		1	[Bidirection]
731 	 * 0		1		0	[Output]
732 	 * 1		0		0	[Input]
733 	 *
734 	 * PIOn_SET_PC and PIOn_CLR_PC registers are used to set and clear bits
735 	 * individually.
736 	 */
737 	for (i = 0; i <= 2; i++) {
738 		if (direction & BIT(i))
739 			writel(BIT(offset), bank->base + REG_PIO_SET_PC(i));
740 		else
741 			writel(BIT(offset), bank->base + REG_PIO_CLR_PC(i));
742 	}
743 }
744 
745 static int st_gpio_request(struct gpio_chip *chip, unsigned offset)
746 {
747 	return pinctrl_request_gpio(chip->base + offset);
748 }
749 
750 static void st_gpio_free(struct gpio_chip *chip, unsigned offset)
751 {
752 	pinctrl_free_gpio(chip->base + offset);
753 }
754 
755 static int st_gpio_get(struct gpio_chip *chip, unsigned offset)
756 {
757 	struct st_gpio_bank *bank = gpio_chip_to_bank(chip);
758 
759 	return !!(readl(bank->base + REG_PIO_PIN) & BIT(offset));
760 }
761 
762 static void st_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
763 {
764 	struct st_gpio_bank *bank = gpio_chip_to_bank(chip);
765 	__st_gpio_set(bank, offset, value);
766 }
767 
768 static int st_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
769 {
770 	pinctrl_gpio_direction_input(chip->base + offset);
771 
772 	return 0;
773 }
774 
775 static int st_gpio_direction_output(struct gpio_chip *chip,
776 	unsigned offset, int value)
777 {
778 	struct st_gpio_bank *bank = gpio_chip_to_bank(chip);
779 
780 	__st_gpio_set(bank, offset, value);
781 	pinctrl_gpio_direction_output(chip->base + offset);
782 
783 	return 0;
784 }
785 
786 static int st_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
787 {
788 	struct st_gpio_bank *bank = gpio_chip_to_bank(chip);
789 	struct st_pio_control pc = bank->pc;
790 	unsigned long config;
791 	unsigned int direction = 0;
792 	unsigned int function;
793 	unsigned int value;
794 	int i = 0;
795 
796 	/* Alternate function direction is handled by Pinctrl */
797 	function = st_pctl_get_pin_function(&pc, offset);
798 	if (function) {
799 		st_pinconf_get_direction(&pc, offset, &config);
800 		return !ST_PINCONF_UNPACK_OE(config);
801 	}
802 
803 	/*
804 	 * GPIO direction is handled differently
805 	 * - See st_gpio_direction() above for an explanation
806 	 */
807 	for (i = 0; i <= 2; i++) {
808 		value = readl(bank->base + REG_PIO_PC(i));
809 		direction |= ((value >> offset) & 0x1) << i;
810 	}
811 
812 	return (direction == ST_GPIO_DIRECTION_IN);
813 }
814 
815 static int st_gpio_xlate(struct gpio_chip *gc,
816 			const struct of_phandle_args *gpiospec, u32 *flags)
817 {
818 	if (WARN_ON(gc->of_gpio_n_cells < 1))
819 		return -EINVAL;
820 
821 	if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
822 		return -EINVAL;
823 
824 	if (gpiospec->args[0] > gc->ngpio)
825 		return -EINVAL;
826 
827 	return gpiospec->args[0];
828 }
829 
830 /* Pinctrl Groups */
831 static int st_pctl_get_groups_count(struct pinctrl_dev *pctldev)
832 {
833 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
834 
835 	return info->ngroups;
836 }
837 
838 static const char *st_pctl_get_group_name(struct pinctrl_dev *pctldev,
839 				       unsigned selector)
840 {
841 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
842 
843 	return info->groups[selector].name;
844 }
845 
846 static int st_pctl_get_group_pins(struct pinctrl_dev *pctldev,
847 	unsigned selector, const unsigned **pins, unsigned *npins)
848 {
849 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
850 
851 	if (selector >= info->ngroups)
852 		return -EINVAL;
853 
854 	*pins = info->groups[selector].pins;
855 	*npins = info->groups[selector].npins;
856 
857 	return 0;
858 }
859 
860 static const inline struct st_pctl_group *st_pctl_find_group_by_name(
861 	const struct st_pinctrl *info, const char *name)
862 {
863 	int i;
864 
865 	for (i = 0; i < info->ngroups; i++) {
866 		if (!strcmp(info->groups[i].name, name))
867 			return &info->groups[i];
868 	}
869 
870 	return NULL;
871 }
872 
873 static int st_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
874 	struct device_node *np, struct pinctrl_map **map, unsigned *num_maps)
875 {
876 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
877 	const struct st_pctl_group *grp;
878 	struct pinctrl_map *new_map;
879 	struct device_node *parent;
880 	int map_num, i;
881 
882 	grp = st_pctl_find_group_by_name(info, np->name);
883 	if (!grp) {
884 		dev_err(info->dev, "unable to find group for node %s\n",
885 			np->name);
886 		return -EINVAL;
887 	}
888 
889 	map_num = grp->npins + 1;
890 	new_map = devm_kzalloc(pctldev->dev,
891 				sizeof(*new_map) * map_num, GFP_KERNEL);
892 	if (!new_map)
893 		return -ENOMEM;
894 
895 	parent = of_get_parent(np);
896 	if (!parent) {
897 		devm_kfree(pctldev->dev, new_map);
898 		return -EINVAL;
899 	}
900 
901 	*map = new_map;
902 	*num_maps = map_num;
903 	new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
904 	new_map[0].data.mux.function = parent->name;
905 	new_map[0].data.mux.group = np->name;
906 	of_node_put(parent);
907 
908 	/* create config map per pin */
909 	new_map++;
910 	for (i = 0; i < grp->npins; i++) {
911 		new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
912 		new_map[i].data.configs.group_or_pin =
913 				pin_get_name(pctldev, grp->pins[i]);
914 		new_map[i].data.configs.configs = &grp->pin_conf[i].config;
915 		new_map[i].data.configs.num_configs = 1;
916 	}
917 	dev_info(pctldev->dev, "maps: function %s group %s num %d\n",
918 		(*map)->data.mux.function, grp->name, map_num);
919 
920 	return 0;
921 }
922 
923 static void st_pctl_dt_free_map(struct pinctrl_dev *pctldev,
924 			struct pinctrl_map *map, unsigned num_maps)
925 {
926 }
927 
928 static struct pinctrl_ops st_pctlops = {
929 	.get_groups_count	= st_pctl_get_groups_count,
930 	.get_group_pins		= st_pctl_get_group_pins,
931 	.get_group_name		= st_pctl_get_group_name,
932 	.dt_node_to_map		= st_pctl_dt_node_to_map,
933 	.dt_free_map		= st_pctl_dt_free_map,
934 };
935 
936 /* Pinmux */
937 static int st_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
938 {
939 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
940 
941 	return info->nfunctions;
942 }
943 
944 static const char *st_pmx_get_fname(struct pinctrl_dev *pctldev,
945 	unsigned selector)
946 {
947 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
948 
949 	return info->functions[selector].name;
950 }
951 
952 static int st_pmx_get_groups(struct pinctrl_dev *pctldev,
953 	unsigned selector, const char * const **grps, unsigned * const ngrps)
954 {
955 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
956 	*grps = info->functions[selector].groups;
957 	*ngrps = info->functions[selector].ngroups;
958 
959 	return 0;
960 }
961 
962 static int st_pmx_set_mux(struct pinctrl_dev *pctldev, unsigned fselector,
963 			unsigned group)
964 {
965 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
966 	struct st_pinconf *conf = info->groups[group].pin_conf;
967 	struct st_pio_control *pc;
968 	int i;
969 
970 	for (i = 0; i < info->groups[group].npins; i++) {
971 		pc = st_get_pio_control(pctldev, conf[i].pin);
972 		st_pctl_set_function(pc, conf[i].pin, conf[i].altfunc);
973 	}
974 
975 	return 0;
976 }
977 
978 static int st_pmx_set_gpio_direction(struct pinctrl_dev *pctldev,
979 			struct pinctrl_gpio_range *range, unsigned gpio,
980 			bool input)
981 {
982 	struct st_gpio_bank *bank = gpio_range_to_bank(range);
983 	/*
984 	 * When a PIO bank is used in its primary function mode (altfunc = 0)
985 	 * Output Enable (OE), Open Drain(OD), and Pull Up (PU)
986 	 * for the primary PIO functions are driven by the related PIO block
987 	 */
988 	st_pctl_set_function(&bank->pc, gpio, 0);
989 	st_gpio_direction(bank, gpio, input ?
990 		ST_GPIO_DIRECTION_IN : ST_GPIO_DIRECTION_OUT);
991 
992 	return 0;
993 }
994 
995 static struct pinmux_ops st_pmxops = {
996 	.get_functions_count	= st_pmx_get_funcs_count,
997 	.get_function_name	= st_pmx_get_fname,
998 	.get_function_groups	= st_pmx_get_groups,
999 	.set_mux		= st_pmx_set_mux,
1000 	.gpio_set_direction	= st_pmx_set_gpio_direction,
1001 };
1002 
1003 /* Pinconf  */
1004 static void st_pinconf_get_retime(struct st_pinctrl *info,
1005 	struct st_pio_control *pc, int pin, unsigned long *config)
1006 {
1007 	if (info->data->rt_style == st_retime_style_packed)
1008 		st_pinconf_get_retime_packed(info, pc, pin, config);
1009 	else if (info->data->rt_style == st_retime_style_dedicated)
1010 		if ((BIT(pin) & pc->rt_pin_mask))
1011 			st_pinconf_get_retime_dedicated(info, pc,
1012 					pin, config);
1013 }
1014 
1015 static void st_pinconf_set_retime(struct st_pinctrl *info,
1016 	struct st_pio_control *pc, int pin, unsigned long config)
1017 {
1018 	if (info->data->rt_style == st_retime_style_packed)
1019 		st_pinconf_set_retime_packed(info, pc, config, pin);
1020 	else if (info->data->rt_style == st_retime_style_dedicated)
1021 		if ((BIT(pin) & pc->rt_pin_mask))
1022 			st_pinconf_set_retime_dedicated(info, pc,
1023 							config, pin);
1024 }
1025 
1026 static int st_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin_id,
1027 			unsigned long *configs, unsigned num_configs)
1028 {
1029 	int pin = st_gpio_pin(pin_id);
1030 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
1031 	struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id);
1032 	int i;
1033 
1034 	for (i = 0; i < num_configs; i++) {
1035 		st_pinconf_set_config(pc, pin, configs[i]);
1036 		st_pinconf_set_retime(info, pc, pin, configs[i]);
1037 	} /* for each config */
1038 
1039 	return 0;
1040 }
1041 
1042 static int st_pinconf_get(struct pinctrl_dev *pctldev,
1043 			     unsigned pin_id, unsigned long *config)
1044 {
1045 	int pin = st_gpio_pin(pin_id);
1046 	struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
1047 	struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id);
1048 
1049 	*config = 0;
1050 	st_pinconf_get_direction(pc, pin, config);
1051 	st_pinconf_get_retime(info, pc, pin, config);
1052 
1053 	return 0;
1054 }
1055 
1056 static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev,
1057 				   struct seq_file *s, unsigned pin_id)
1058 {
1059 	struct st_pio_control *pc;
1060 	unsigned long config;
1061 	unsigned int function;
1062 	int offset = st_gpio_pin(pin_id);
1063 	char f[16];
1064 
1065 	mutex_unlock(&pctldev->mutex);
1066 	pc = st_get_pio_control(pctldev, pin_id);
1067 	st_pinconf_get(pctldev, pin_id, &config);
1068 	mutex_lock(&pctldev->mutex);
1069 
1070 	function = st_pctl_get_pin_function(pc, offset);
1071 	if (function)
1072 		snprintf(f, 10, "Alt Fn %d", function);
1073 	else
1074 		snprintf(f, 5, "GPIO");
1075 
1076 	seq_printf(s, "[OE:%d,PU:%ld,OD:%ld]\t%s\n"
1077 		"\t\t[retime:%ld,invclk:%ld,clknotdat:%ld,"
1078 		"de:%ld,rt-clk:%ld,rt-delay:%ld]",
1079 		!st_gpio_get_direction(&pc_to_bank(pc)->gpio_chip, offset),
1080 		ST_PINCONF_UNPACK_PU(config),
1081 		ST_PINCONF_UNPACK_OD(config),
1082 		f,
1083 		ST_PINCONF_UNPACK_RT(config),
1084 		ST_PINCONF_UNPACK_RT_INVERTCLK(config),
1085 		ST_PINCONF_UNPACK_RT_CLKNOTDATA(config),
1086 		ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config),
1087 		ST_PINCONF_UNPACK_RT_CLK(config),
1088 		ST_PINCONF_UNPACK_RT_DELAY(config));
1089 }
1090 
1091 static struct pinconf_ops st_confops = {
1092 	.pin_config_get		= st_pinconf_get,
1093 	.pin_config_set		= st_pinconf_set,
1094 	.pin_config_dbg_show	= st_pinconf_dbg_show,
1095 };
1096 
1097 static void st_pctl_dt_child_count(struct st_pinctrl *info,
1098 				     struct device_node *np)
1099 {
1100 	struct device_node *child;
1101 	for_each_child_of_node(np, child) {
1102 		if (of_property_read_bool(child, "gpio-controller")) {
1103 			info->nbanks++;
1104 		} else {
1105 			info->nfunctions++;
1106 			info->ngroups += of_get_child_count(child);
1107 		}
1108 	}
1109 }
1110 
1111 static int st_pctl_dt_setup_retime_packed(struct st_pinctrl *info,
1112 	int bank, struct st_pio_control *pc)
1113 {
1114 	struct device *dev = info->dev;
1115 	struct regmap *rm = info->regmap;
1116 	const struct st_pctl_data *data = info->data;
1117 	/* 2 registers per bank */
1118 	int reg = (data->rt + bank * RT_P_CFGS_PER_BANK) * 4;
1119 	struct st_retime_packed *rt_p = &pc->rt.rt_p;
1120 	/* cfg0 */
1121 	struct reg_field clk1notclk0 = RT_P_CFG0_CLK1NOTCLK0_FIELD(reg);
1122 	struct reg_field delay_0 = RT_P_CFG0_DELAY_0_FIELD(reg);
1123 	struct reg_field delay_1 = RT_P_CFG0_DELAY_1_FIELD(reg);
1124 	/* cfg1 */
1125 	struct reg_field invertclk = RT_P_CFG1_INVERTCLK_FIELD(reg + 4);
1126 	struct reg_field retime = RT_P_CFG1_RETIME_FIELD(reg + 4);
1127 	struct reg_field clknotdata = RT_P_CFG1_CLKNOTDATA_FIELD(reg + 4);
1128 	struct reg_field double_edge = RT_P_CFG1_DOUBLE_EDGE_FIELD(reg + 4);
1129 
1130 	rt_p->clk1notclk0 = devm_regmap_field_alloc(dev, rm, clk1notclk0);
1131 	rt_p->delay_0	= devm_regmap_field_alloc(dev, rm, delay_0);
1132 	rt_p->delay_1 = devm_regmap_field_alloc(dev, rm, delay_1);
1133 	rt_p->invertclk = devm_regmap_field_alloc(dev, rm, invertclk);
1134 	rt_p->retime = devm_regmap_field_alloc(dev, rm, retime);
1135 	rt_p->clknotdata = devm_regmap_field_alloc(dev, rm, clknotdata);
1136 	rt_p->double_edge = devm_regmap_field_alloc(dev, rm, double_edge);
1137 
1138 	if (IS_ERR(rt_p->clk1notclk0) || IS_ERR(rt_p->delay_0) ||
1139 		 IS_ERR(rt_p->delay_1) || IS_ERR(rt_p->invertclk) ||
1140 		 IS_ERR(rt_p->retime) || IS_ERR(rt_p->clknotdata) ||
1141 		 IS_ERR(rt_p->double_edge))
1142 		return -EINVAL;
1143 
1144 	return 0;
1145 }
1146 
1147 static int st_pctl_dt_setup_retime_dedicated(struct st_pinctrl *info,
1148 	int bank, struct st_pio_control *pc)
1149 {
1150 	struct device *dev = info->dev;
1151 	struct regmap *rm = info->regmap;
1152 	const struct st_pctl_data *data = info->data;
1153 	/* 8 registers per bank */
1154 	int reg_offset = (data->rt + bank * RT_D_CFGS_PER_BANK) * 4;
1155 	struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
1156 	unsigned int j;
1157 	u32 pin_mask = pc->rt_pin_mask;
1158 
1159 	for (j = 0; j < RT_D_CFGS_PER_BANK; j++) {
1160 		if (BIT(j) & pin_mask) {
1161 			struct reg_field reg = REG_FIELD(reg_offset, 0, 31);
1162 			rt_d->rt[j] = devm_regmap_field_alloc(dev, rm, reg);
1163 			if (IS_ERR(rt_d->rt[j]))
1164 				return -EINVAL;
1165 			reg_offset += 4;
1166 		}
1167 	}
1168 	return 0;
1169 }
1170 
1171 static int st_pctl_dt_setup_retime(struct st_pinctrl *info,
1172 	int bank, struct st_pio_control *pc)
1173 {
1174 	const struct st_pctl_data *data = info->data;
1175 	if (data->rt_style  == st_retime_style_packed)
1176 		return st_pctl_dt_setup_retime_packed(info, bank, pc);
1177 	else if (data->rt_style == st_retime_style_dedicated)
1178 		return st_pctl_dt_setup_retime_dedicated(info, bank, pc);
1179 
1180 	return -EINVAL;
1181 }
1182 
1183 
1184 static struct regmap_field *st_pc_get_value(struct device *dev,
1185 					    struct regmap *regmap, int bank,
1186 					    int data, int lsb, int msb)
1187 {
1188 	struct reg_field reg = REG_FIELD((data + bank) * 4, lsb, msb);
1189 
1190 	if (data < 0)
1191 		return NULL;
1192 
1193 	return devm_regmap_field_alloc(dev, regmap, reg);
1194 }
1195 
1196 static void st_parse_syscfgs(struct st_pinctrl *info, int bank,
1197 			     struct device_node *np)
1198 {
1199 	const struct st_pctl_data *data = info->data;
1200 	/**
1201 	 * For a given shared register like OE/PU/OD, there are 8 bits per bank
1202 	 * 0:7 belongs to bank0, 8:15 belongs to bank1 ...
1203 	 * So each register is shared across 4 banks.
1204 	 */
1205 	int lsb = (bank%4) * ST_GPIO_PINS_PER_BANK;
1206 	int msb = lsb + ST_GPIO_PINS_PER_BANK - 1;
1207 	struct st_pio_control *pc = &info->banks[bank].pc;
1208 	struct device *dev = info->dev;
1209 	struct regmap *regmap  = info->regmap;
1210 
1211 	pc->alt = st_pc_get_value(dev, regmap, bank, data->alt, 0, 31);
1212 	pc->oe = st_pc_get_value(dev, regmap, bank/4, data->oe, lsb, msb);
1213 	pc->pu = st_pc_get_value(dev, regmap, bank/4, data->pu, lsb, msb);
1214 	pc->od = st_pc_get_value(dev, regmap, bank/4, data->od, lsb, msb);
1215 
1216 	/* retime avaiable for all pins by default */
1217 	pc->rt_pin_mask = 0xff;
1218 	of_property_read_u32(np, "st,retime-pin-mask", &pc->rt_pin_mask);
1219 	st_pctl_dt_setup_retime(info, bank, pc);
1220 
1221 	return;
1222 }
1223 
1224 /*
1225  * Each pin is represented in of the below forms.
1226  * <bank offset mux direction rt_type rt_delay rt_clk>
1227  */
1228 static int st_pctl_dt_parse_groups(struct device_node *np,
1229 	struct st_pctl_group *grp, struct st_pinctrl *info, int idx)
1230 {
1231 	/* bank pad direction val altfunction */
1232 	const __be32 *list;
1233 	struct property *pp;
1234 	struct st_pinconf *conf;
1235 	struct device_node *pins;
1236 	int i = 0, npins = 0, nr_props;
1237 
1238 	pins = of_get_child_by_name(np, "st,pins");
1239 	if (!pins)
1240 		return -ENODATA;
1241 
1242 	for_each_property_of_node(pins, pp) {
1243 		/* Skip those we do not want to proceed */
1244 		if (!strcmp(pp->name, "name"))
1245 			continue;
1246 
1247 		if (pp  && (pp->length/sizeof(__be32)) >= OF_GPIO_ARGS_MIN) {
1248 			npins++;
1249 		} else {
1250 			pr_warn("Invalid st,pins in %s node\n", np->name);
1251 			return -EINVAL;
1252 		}
1253 	}
1254 
1255 	grp->npins = npins;
1256 	grp->name = np->name;
1257 	grp->pins = devm_kzalloc(info->dev, npins * sizeof(u32), GFP_KERNEL);
1258 	grp->pin_conf = devm_kzalloc(info->dev,
1259 					npins * sizeof(*conf), GFP_KERNEL);
1260 
1261 	if (!grp->pins || !grp->pin_conf)
1262 		return -ENOMEM;
1263 
1264 	/* <bank offset mux direction rt_type rt_delay rt_clk> */
1265 	for_each_property_of_node(pins, pp) {
1266 		if (!strcmp(pp->name, "name"))
1267 			continue;
1268 		nr_props = pp->length/sizeof(u32);
1269 		list = pp->value;
1270 		conf = &grp->pin_conf[i];
1271 
1272 		/* bank & offset */
1273 		be32_to_cpup(list++);
1274 		be32_to_cpup(list++);
1275 		conf->pin = of_get_named_gpio(pins, pp->name, 0);
1276 		conf->name = pp->name;
1277 		grp->pins[i] = conf->pin;
1278 		/* mux */
1279 		conf->altfunc = be32_to_cpup(list++);
1280 		conf->config = 0;
1281 		/* direction */
1282 		conf->config |= be32_to_cpup(list++);
1283 		/* rt_type rt_delay rt_clk */
1284 		if (nr_props >= OF_GPIO_ARGS_MIN + OF_RT_ARGS_MIN) {
1285 			/* rt_type */
1286 			conf->config |= be32_to_cpup(list++);
1287 			/* rt_delay */
1288 			conf->config |= be32_to_cpup(list++);
1289 			/* rt_clk */
1290 			if (nr_props > OF_GPIO_ARGS_MIN + OF_RT_ARGS_MIN)
1291 				conf->config |= be32_to_cpup(list++);
1292 		}
1293 		i++;
1294 	}
1295 	of_node_put(pins);
1296 
1297 	return 0;
1298 }
1299 
1300 static int st_pctl_parse_functions(struct device_node *np,
1301 			struct st_pinctrl *info, u32 index, int *grp_index)
1302 {
1303 	struct device_node *child;
1304 	struct st_pmx_func *func;
1305 	struct st_pctl_group *grp;
1306 	int ret, i;
1307 
1308 	func = &info->functions[index];
1309 	func->name = np->name;
1310 	func->ngroups = of_get_child_count(np);
1311 	if (func->ngroups == 0) {
1312 		dev_err(info->dev, "No groups defined\n");
1313 		return -EINVAL;
1314 	}
1315 	func->groups = devm_kzalloc(info->dev,
1316 			func->ngroups * sizeof(char *), GFP_KERNEL);
1317 	if (!func->groups)
1318 		return -ENOMEM;
1319 
1320 	i = 0;
1321 	for_each_child_of_node(np, child) {
1322 		func->groups[i] = child->name;
1323 		grp = &info->groups[*grp_index];
1324 		*grp_index += 1;
1325 		ret = st_pctl_dt_parse_groups(child, grp, info, i++);
1326 		if (ret)
1327 			return ret;
1328 	}
1329 	dev_info(info->dev, "Function[%d\t name:%s,\tgroups:%d]\n",
1330 				index, func->name, func->ngroups);
1331 
1332 	return 0;
1333 }
1334 
1335 static void st_gpio_irq_mask(struct irq_data *d)
1336 {
1337 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1338 	struct st_gpio_bank *bank = gpio_chip_to_bank(gc);
1339 
1340 	writel(BIT(d->hwirq), bank->base + REG_PIO_CLR_PMASK);
1341 }
1342 
1343 static void st_gpio_irq_unmask(struct irq_data *d)
1344 {
1345 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1346 	struct st_gpio_bank *bank = gpio_chip_to_bank(gc);
1347 
1348 	writel(BIT(d->hwirq), bank->base + REG_PIO_SET_PMASK);
1349 }
1350 
1351 static int st_gpio_irq_set_type(struct irq_data *d, unsigned type)
1352 {
1353 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1354 	struct st_gpio_bank *bank = gpio_chip_to_bank(gc);
1355 	unsigned long flags;
1356 	int comp, pin = d->hwirq;
1357 	u32 val;
1358 	u32 pin_edge_conf = 0;
1359 
1360 	switch (type) {
1361 	case IRQ_TYPE_LEVEL_HIGH:
1362 		comp = 0;
1363 		break;
1364 	case IRQ_TYPE_EDGE_FALLING:
1365 		comp = 0;
1366 		pin_edge_conf = ST_IRQ_FALLING_EDGE_CONF(pin);
1367 		break;
1368 	case IRQ_TYPE_LEVEL_LOW:
1369 		comp = 1;
1370 		break;
1371 	case IRQ_TYPE_EDGE_RISING:
1372 		comp = 1;
1373 		pin_edge_conf = ST_IRQ_RISING_EDGE_CONF(pin);
1374 		break;
1375 	case IRQ_TYPE_EDGE_BOTH:
1376 		comp = st_gpio_get(&bank->gpio_chip, pin);
1377 		pin_edge_conf = ST_IRQ_BOTH_EDGE_CONF(pin);
1378 		break;
1379 	default:
1380 		return -EINVAL;
1381 	}
1382 
1383 	spin_lock_irqsave(&bank->lock, flags);
1384 	bank->irq_edge_conf &=  ~(ST_IRQ_EDGE_MASK << (
1385 				pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN));
1386 	bank->irq_edge_conf |= pin_edge_conf;
1387 	spin_unlock_irqrestore(&bank->lock, flags);
1388 
1389 	val = readl(bank->base + REG_PIO_PCOMP);
1390 	val &= ~BIT(pin);
1391 	val |= (comp << pin);
1392 	writel(val, bank->base + REG_PIO_PCOMP);
1393 
1394 	return 0;
1395 }
1396 
1397 /*
1398  * As edge triggers are not supported at hardware level, it is supported by
1399  * software by exploiting the level trigger support in hardware.
1400  *
1401  * Steps for detection raising edge interrupt in software.
1402  *
1403  * Step 1: CONFIGURE pin to detect level LOW interrupts.
1404  *
1405  * Step 2: DETECT level LOW interrupt and in irqmux/gpio bank interrupt handler,
1406  * if the value of pin is low, then CONFIGURE pin for level HIGH interrupt.
1407  * IGNORE calling the actual interrupt handler for the pin at this stage.
1408  *
1409  * Step 3: DETECT level HIGH interrupt and in irqmux/gpio-bank interrupt handler
1410  * if the value of pin is HIGH, CONFIGURE pin for level LOW interrupt and then
1411  * DISPATCH the interrupt to the interrupt handler of the pin.
1412  *
1413  *		 step-1  ________     __________
1414  *				|     | step - 3
1415  *			        |     |
1416  *			step -2 |_____|
1417  *
1418  * falling edge is also detected int the same way.
1419  *
1420  */
1421 static void __gpio_irq_handler(struct st_gpio_bank *bank)
1422 {
1423 	unsigned long port_in, port_mask, port_comp, active_irqs;
1424 	unsigned long bank_edge_mask, flags;
1425 	int n, val, ecfg;
1426 
1427 	spin_lock_irqsave(&bank->lock, flags);
1428 	bank_edge_mask = bank->irq_edge_conf;
1429 	spin_unlock_irqrestore(&bank->lock, flags);
1430 
1431 	for (;;) {
1432 		port_in = readl(bank->base + REG_PIO_PIN);
1433 		port_comp = readl(bank->base + REG_PIO_PCOMP);
1434 		port_mask = readl(bank->base + REG_PIO_PMASK);
1435 
1436 		active_irqs = (port_in ^ port_comp) & port_mask;
1437 
1438 		if (active_irqs == 0)
1439 			break;
1440 
1441 		for_each_set_bit(n, &active_irqs, BITS_PER_LONG) {
1442 			/* check if we are detecting fake edges ... */
1443 			ecfg = ST_IRQ_EDGE_CONF(bank_edge_mask, n);
1444 
1445 			if (ecfg) {
1446 				/* edge detection. */
1447 				val = st_gpio_get(&bank->gpio_chip, n);
1448 
1449 				writel(BIT(n),
1450 					val ? bank->base + REG_PIO_SET_PCOMP :
1451 					bank->base + REG_PIO_CLR_PCOMP);
1452 
1453 				if (ecfg != ST_IRQ_EDGE_BOTH &&
1454 					!((ecfg & ST_IRQ_EDGE_FALLING) ^ val))
1455 					continue;
1456 			}
1457 
1458 			generic_handle_irq(irq_find_mapping(bank->gpio_chip.irqdomain, n));
1459 		}
1460 	}
1461 }
1462 
1463 static void st_gpio_irq_handler(struct irq_desc *desc)
1464 {
1465 	/* interrupt dedicated per bank */
1466 	struct irq_chip *chip = irq_desc_get_chip(desc);
1467 	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
1468 	struct st_gpio_bank *bank = gpio_chip_to_bank(gc);
1469 
1470 	chained_irq_enter(chip, desc);
1471 	__gpio_irq_handler(bank);
1472 	chained_irq_exit(chip, desc);
1473 }
1474 
1475 static void st_gpio_irqmux_handler(struct irq_desc *desc)
1476 {
1477 	struct irq_chip *chip = irq_desc_get_chip(desc);
1478 	struct st_pinctrl *info = irq_desc_get_handler_data(desc);
1479 	unsigned long status;
1480 	int n;
1481 
1482 	chained_irq_enter(chip, desc);
1483 
1484 	status = readl(info->irqmux_base);
1485 
1486 	for_each_set_bit(n, &status, info->nbanks)
1487 		__gpio_irq_handler(&info->banks[n]);
1488 
1489 	chained_irq_exit(chip, desc);
1490 }
1491 
1492 static struct gpio_chip st_gpio_template = {
1493 	.request		= st_gpio_request,
1494 	.free			= st_gpio_free,
1495 	.get			= st_gpio_get,
1496 	.set			= st_gpio_set,
1497 	.direction_input	= st_gpio_direction_input,
1498 	.direction_output	= st_gpio_direction_output,
1499 	.get_direction		= st_gpio_get_direction,
1500 	.ngpio			= ST_GPIO_PINS_PER_BANK,
1501 	.of_gpio_n_cells	= 1,
1502 	.of_xlate		= st_gpio_xlate,
1503 };
1504 
1505 static struct irq_chip st_gpio_irqchip = {
1506 	.name		= "GPIO",
1507 	.irq_disable	= st_gpio_irq_mask,
1508 	.irq_mask	= st_gpio_irq_mask,
1509 	.irq_unmask	= st_gpio_irq_unmask,
1510 	.irq_set_type	= st_gpio_irq_set_type,
1511 	.flags		= IRQCHIP_SKIP_SET_WAKE,
1512 };
1513 
1514 static int st_gpiolib_register_bank(struct st_pinctrl *info,
1515 	int bank_nr, struct device_node *np)
1516 {
1517 	struct st_gpio_bank *bank = &info->banks[bank_nr];
1518 	struct pinctrl_gpio_range *range = &bank->range;
1519 	struct device *dev = info->dev;
1520 	int bank_num = of_alias_get_id(np, "gpio");
1521 	struct resource res, irq_res;
1522 	int gpio_irq = 0, err;
1523 
1524 	if (of_address_to_resource(np, 0, &res))
1525 		return -ENODEV;
1526 
1527 	bank->base = devm_ioremap_resource(dev, &res);
1528 	if (IS_ERR(bank->base))
1529 		return PTR_ERR(bank->base);
1530 
1531 	bank->gpio_chip = st_gpio_template;
1532 	bank->gpio_chip.base = bank_num * ST_GPIO_PINS_PER_BANK;
1533 	bank->gpio_chip.ngpio = ST_GPIO_PINS_PER_BANK;
1534 	bank->gpio_chip.of_node = np;
1535 	bank->gpio_chip.dev = dev;
1536 	spin_lock_init(&bank->lock);
1537 
1538 	of_property_read_string(np, "st,bank-name", &range->name);
1539 	bank->gpio_chip.label = range->name;
1540 
1541 	range->id = bank_num;
1542 	range->pin_base = range->base = range->id * ST_GPIO_PINS_PER_BANK;
1543 	range->npins = bank->gpio_chip.ngpio;
1544 	range->gc = &bank->gpio_chip;
1545 	err  = gpiochip_add(&bank->gpio_chip);
1546 	if (err) {
1547 		dev_err(dev, "Failed to add gpiochip(%d)!\n", bank_num);
1548 		return err;
1549 	}
1550 	dev_info(dev, "%s bank added.\n", range->name);
1551 
1552 	/**
1553 	 * GPIO bank can have one of the two possible types of
1554 	 * interrupt-wirings.
1555 	 *
1556 	 * First type is via irqmux, single interrupt is used by multiple
1557 	 * gpio banks. This reduces number of overall interrupts numbers
1558 	 * required. All these banks belong to a single pincontroller.
1559 	 *		  _________
1560 	 *		 |	   |----> [gpio-bank (n)    ]
1561 	 *		 |	   |----> [gpio-bank (n + 1)]
1562 	 *	[irqN]-- | irq-mux |----> [gpio-bank (n + 2)]
1563 	 *		 |	   |----> [gpio-bank (...  )]
1564 	 *		 |_________|----> [gpio-bank (n + 7)]
1565 	 *
1566 	 * Second type has a dedicated interrupt per each gpio bank.
1567 	 *
1568 	 *	[irqN]----> [gpio-bank (n)]
1569 	 */
1570 
1571 	if (of_irq_to_resource(np, 0, &irq_res)) {
1572 		gpio_irq = irq_res.start;
1573 		gpiochip_set_chained_irqchip(&bank->gpio_chip, &st_gpio_irqchip,
1574 					     gpio_irq, st_gpio_irq_handler);
1575 	}
1576 
1577 	if (info->irqmux_base || gpio_irq > 0) {
1578 		err = gpiochip_irqchip_add(&bank->gpio_chip, &st_gpio_irqchip,
1579 					   0, handle_simple_irq,
1580 					   IRQ_TYPE_LEVEL_LOW);
1581 		if (err) {
1582 			gpiochip_remove(&bank->gpio_chip);
1583 			dev_info(dev, "could not add irqchip\n");
1584 			return err;
1585 		}
1586 	} else {
1587 		dev_info(dev, "No IRQ support for %s bank\n", np->full_name);
1588 	}
1589 
1590 	return 0;
1591 }
1592 
1593 static const struct of_device_id st_pctl_of_match[] = {
1594 	{ .compatible = "st,stih415-sbc-pinctrl", .data = &stih415_sbc_data },
1595 	{ .compatible = "st,stih415-rear-pinctrl", .data = &stih415_rear_data },
1596 	{ .compatible = "st,stih415-left-pinctrl", .data = &stih415_left_data },
1597 	{ .compatible = "st,stih415-right-pinctrl",
1598 		.data = &stih415_right_data },
1599 	{ .compatible = "st,stih415-front-pinctrl",
1600 		.data = &stih415_front_data },
1601 	{ .compatible = "st,stih416-sbc-pinctrl", .data = &stih416_data},
1602 	{ .compatible = "st,stih416-front-pinctrl", .data = &stih416_data},
1603 	{ .compatible = "st,stih416-rear-pinctrl", .data = &stih416_data},
1604 	{ .compatible = "st,stih416-fvdp-fe-pinctrl", .data = &stih416_data},
1605 	{ .compatible = "st,stih416-fvdp-lite-pinctrl", .data = &stih416_data},
1606 	{ .compatible = "st,stih407-sbc-pinctrl", .data = &stih416_data},
1607 	{ .compatible = "st,stih407-front-pinctrl", .data = &stih416_data},
1608 	{ .compatible = "st,stih407-rear-pinctrl", .data = &stih416_data},
1609 	{ .compatible = "st,stih407-flash-pinctrl", .data = &stih407_flashdata},
1610 	{ /* sentinel */ }
1611 };
1612 
1613 static int st_pctl_probe_dt(struct platform_device *pdev,
1614 	struct pinctrl_desc *pctl_desc, struct st_pinctrl *info)
1615 {
1616 	int ret = 0;
1617 	int i = 0, j = 0, k = 0, bank;
1618 	struct pinctrl_pin_desc *pdesc;
1619 	struct device_node *np = pdev->dev.of_node;
1620 	struct device_node *child;
1621 	int grp_index = 0;
1622 	int irq = 0;
1623 	struct resource *res;
1624 
1625 	st_pctl_dt_child_count(info, np);
1626 	if (!info->nbanks) {
1627 		dev_err(&pdev->dev, "you need atleast one gpio bank\n");
1628 		return -EINVAL;
1629 	}
1630 
1631 	dev_info(&pdev->dev, "nbanks = %d\n", info->nbanks);
1632 	dev_info(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
1633 	dev_info(&pdev->dev, "ngroups = %d\n", info->ngroups);
1634 
1635 	info->functions = devm_kzalloc(&pdev->dev,
1636 		info->nfunctions * sizeof(*info->functions), GFP_KERNEL);
1637 
1638 	info->groups = devm_kzalloc(&pdev->dev,
1639 			info->ngroups * sizeof(*info->groups) ,	GFP_KERNEL);
1640 
1641 	info->banks = devm_kzalloc(&pdev->dev,
1642 			info->nbanks * sizeof(*info->banks), GFP_KERNEL);
1643 
1644 	if (!info->functions || !info->groups || !info->banks)
1645 		return -ENOMEM;
1646 
1647 	info->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
1648 	if (IS_ERR(info->regmap)) {
1649 		dev_err(info->dev, "No syscfg phandle specified\n");
1650 		return PTR_ERR(info->regmap);
1651 	}
1652 	info->data = of_match_node(st_pctl_of_match, np)->data;
1653 
1654 	irq = platform_get_irq(pdev, 0);
1655 
1656 	if (irq > 0) {
1657 		res = platform_get_resource_byname(pdev,
1658 					IORESOURCE_MEM, "irqmux");
1659 		info->irqmux_base = devm_ioremap_resource(&pdev->dev, res);
1660 
1661 		if (IS_ERR(info->irqmux_base))
1662 			return PTR_ERR(info->irqmux_base);
1663 
1664 		irq_set_chained_handler_and_data(irq, st_gpio_irqmux_handler,
1665 						 info);
1666 
1667 	}
1668 
1669 	pctl_desc->npins = info->nbanks * ST_GPIO_PINS_PER_BANK;
1670 	pdesc =	devm_kzalloc(&pdev->dev,
1671 			sizeof(*pdesc) * pctl_desc->npins, GFP_KERNEL);
1672 	if (!pdesc)
1673 		return -ENOMEM;
1674 
1675 	pctl_desc->pins = pdesc;
1676 
1677 	bank = 0;
1678 	for_each_child_of_node(np, child) {
1679 		if (of_property_read_bool(child, "gpio-controller")) {
1680 			const char *bank_name = NULL;
1681 			ret = st_gpiolib_register_bank(info, bank, child);
1682 			if (ret)
1683 				return ret;
1684 
1685 			k = info->banks[bank].range.pin_base;
1686 			bank_name = info->banks[bank].range.name;
1687 			for (j = 0; j < ST_GPIO_PINS_PER_BANK; j++, k++) {
1688 				pdesc->number = k;
1689 				pdesc->name = kasprintf(GFP_KERNEL, "%s[%d]",
1690 							bank_name, j);
1691 				pdesc++;
1692 			}
1693 			st_parse_syscfgs(info, bank, child);
1694 			bank++;
1695 		} else {
1696 			ret = st_pctl_parse_functions(child, info,
1697 							i++, &grp_index);
1698 			if (ret) {
1699 				dev_err(&pdev->dev, "No functions found.\n");
1700 				return ret;
1701 			}
1702 		}
1703 	}
1704 
1705 	return 0;
1706 }
1707 
1708 static int st_pctl_probe(struct platform_device *pdev)
1709 {
1710 	struct st_pinctrl *info;
1711 	struct pinctrl_desc *pctl_desc;
1712 	int ret, i;
1713 
1714 	if (!pdev->dev.of_node) {
1715 		dev_err(&pdev->dev, "device node not found.\n");
1716 		return -EINVAL;
1717 	}
1718 
1719 	pctl_desc = devm_kzalloc(&pdev->dev, sizeof(*pctl_desc), GFP_KERNEL);
1720 	if (!pctl_desc)
1721 		return -ENOMEM;
1722 
1723 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
1724 	if (!info)
1725 		return -ENOMEM;
1726 
1727 	info->dev = &pdev->dev;
1728 	platform_set_drvdata(pdev, info);
1729 	ret = st_pctl_probe_dt(pdev, pctl_desc, info);
1730 	if (ret)
1731 		return ret;
1732 
1733 	pctl_desc->owner	= THIS_MODULE;
1734 	pctl_desc->pctlops	= &st_pctlops;
1735 	pctl_desc->pmxops	= &st_pmxops;
1736 	pctl_desc->confops	= &st_confops;
1737 	pctl_desc->name		= dev_name(&pdev->dev);
1738 
1739 	info->pctl = pinctrl_register(pctl_desc, &pdev->dev, info);
1740 	if (IS_ERR(info->pctl)) {
1741 		dev_err(&pdev->dev, "Failed pinctrl registration\n");
1742 		return PTR_ERR(info->pctl);
1743 	}
1744 
1745 	for (i = 0; i < info->nbanks; i++)
1746 		pinctrl_add_gpio_range(info->pctl, &info->banks[i].range);
1747 
1748 	return 0;
1749 }
1750 
1751 static struct platform_driver st_pctl_driver = {
1752 	.driver = {
1753 		.name = "st-pinctrl",
1754 		.of_match_table = st_pctl_of_match,
1755 	},
1756 	.probe = st_pctl_probe,
1757 };
1758 
1759 static int __init st_pctl_init(void)
1760 {
1761 	return platform_driver_register(&st_pctl_driver);
1762 }
1763 arch_initcall(st_pctl_init);
1764