1 // SPDX-License-Identifier: GPL-2.0 2 /* Copyright (C) 2020 Intel Corporation */ 3 4 #include <linux/bitfield.h> 5 #include <linux/bitops.h> 6 #include <linux/gpio/driver.h> 7 #include <linux/interrupt.h> 8 #include <linux/io.h> 9 #include <linux/module.h> 10 11 #include <linux/pinctrl/pinconf.h> 12 #include <linux/pinctrl/pinconf-generic.h> 13 #include <linux/pinctrl/pinctrl.h> 14 #include <linux/pinctrl/pinmux.h> 15 16 #include <linux/platform_device.h> 17 18 #include "core.h" 19 #include "pinmux.h" 20 21 /* GPIO data registers' offsets */ 22 #define KEEMBAY_GPIO_DATA_OUT 0x000 23 #define KEEMBAY_GPIO_DATA_IN 0x020 24 #define KEEMBAY_GPIO_DATA_IN_RAW 0x040 25 #define KEEMBAY_GPIO_DATA_HIGH 0x060 26 #define KEEMBAY_GPIO_DATA_LOW 0x080 27 28 /* GPIO Interrupt and mode registers' offsets */ 29 #define KEEMBAY_GPIO_INT_CFG 0x000 30 #define KEEMBAY_GPIO_MODE 0x070 31 32 /* GPIO mode register bit fields */ 33 #define KEEMBAY_GPIO_MODE_PULLUP_MASK GENMASK(13, 12) 34 #define KEEMBAY_GPIO_MODE_DRIVE_MASK GENMASK(8, 7) 35 #define KEEMBAY_GPIO_MODE_INV_MASK GENMASK(5, 4) 36 #define KEEMBAY_GPIO_MODE_SELECT_MASK GENMASK(2, 0) 37 #define KEEMBAY_GPIO_MODE_DIR_OVR BIT(15) 38 #define KEEMBAY_GPIO_MODE_REN BIT(11) 39 #define KEEMBAY_GPIO_MODE_SCHMITT_EN BIT(10) 40 #define KEEMBAY_GPIO_MODE_SLEW_RATE BIT(9) 41 #define KEEMBAY_GPIO_IRQ_ENABLE BIT(7) 42 #define KEEMBAY_GPIO_MODE_DIR BIT(3) 43 #define KEEMBAY_GPIO_MODE_DEFAULT 0x7 44 #define KEEMBAY_GPIO_MODE_INV_VAL 0x3 45 46 #define KEEMBAY_GPIO_DISABLE 0 47 #define KEEMBAY_GPIO_PULL_UP 1 48 #define KEEMBAY_GPIO_PULL_DOWN 2 49 #define KEEMBAY_GPIO_BUS_HOLD 3 50 #define KEEMBAY_GPIO_NUM_IRQ 8 51 #define KEEMBAY_GPIO_MAX_PER_IRQ 4 52 #define KEEMBAY_GPIO_MAX_PER_REG 32 53 #define KEEMBAY_GPIO_MIN_STRENGTH 2 54 #define KEEMBAY_GPIO_MAX_STRENGTH 12 55 #define KEEMBAY_GPIO_SENSE_LOW (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING) 56 57 /* GPIO reg address calculation */ 58 #define KEEMBAY_GPIO_REG_OFFSET(pin) ((pin) * 4) 59 60 /** 61 * struct keembay_mux_desc - Mux properties of each GPIO pin 62 * @mode: Pin mode when operating in this function 63 * @name: Pin function name 64 */ 65 struct keembay_mux_desc { 66 u8 mode; 67 const char *name; 68 }; 69 70 #define KEEMBAY_PIN_DESC(pin_number, pin_name, ...) { \ 71 .number = pin_number, \ 72 .name = pin_name, \ 73 .drv_data = &(struct keembay_mux_desc[]) { \ 74 __VA_ARGS__, { } }, \ 75 } \ 76 77 #define KEEMBAY_MUX(pin_mode, pin_function) { \ 78 .mode = pin_mode, \ 79 .name = pin_function, \ 80 } \ 81 82 /** 83 * struct keembay_gpio_irq - Config of each GPIO Interrupt sources 84 * @source: Interrupt source number (0 - 7) 85 * @line: Actual Interrupt line number 86 * @pins: Array of GPIO pins using this Interrupt line 87 * @trigger: Interrupt trigger type for this line 88 * @num_share: Number of pins currently using this Interrupt line 89 */ 90 struct keembay_gpio_irq { 91 unsigned int source; 92 unsigned int line; 93 unsigned int pins[KEEMBAY_GPIO_MAX_PER_IRQ]; 94 unsigned int trigger; 95 unsigned int num_share; 96 }; 97 98 /** 99 * struct keembay_pinctrl - Intel Keembay pinctrl structure 100 * @pctrl: Pointer to the pin controller device 101 * @base0: First register base address 102 * @base1: Second register base address 103 * @dev: Pointer to the device structure 104 * @chip: GPIO chip used by this pin controller 105 * @soc: Pin control configuration data based on SoC 106 * @lock: Spinlock to protect various gpio config register access 107 * @ngroups: Number of pin groups available 108 * @nfuncs: Number of pin functions available 109 * @npins: Number of GPIO pins available 110 * @irq: Store Interrupt source 111 * @max_gpios_level_type: Store max level trigger type 112 * @max_gpios_edge_type: Store max edge trigger type 113 */ 114 struct keembay_pinctrl { 115 struct pinctrl_dev *pctrl; 116 void __iomem *base0; 117 void __iomem *base1; 118 struct device *dev; 119 struct gpio_chip chip; 120 const struct keembay_pin_soc *soc; 121 raw_spinlock_t lock; 122 unsigned int ngroups; 123 unsigned int nfuncs; 124 unsigned int npins; 125 struct keembay_gpio_irq irq[KEEMBAY_GPIO_NUM_IRQ]; 126 int max_gpios_level_type; 127 int max_gpios_edge_type; 128 }; 129 130 /** 131 * struct keembay_pin_soc - Pin control config data based on SoC 132 * @pins: Pin description structure 133 */ 134 struct keembay_pin_soc { 135 const struct pinctrl_pin_desc *pins; 136 }; 137 138 static const struct pinctrl_pin_desc keembay_pins[] = { 139 KEEMBAY_PIN_DESC(0, "GPIO0", 140 KEEMBAY_MUX(0x0, "I2S0_M0"), 141 KEEMBAY_MUX(0x1, "SD0_M1"), 142 KEEMBAY_MUX(0x2, "SLVDS0_M2"), 143 KEEMBAY_MUX(0x3, "I2C0_M3"), 144 KEEMBAY_MUX(0x4, "CAM_M4"), 145 KEEMBAY_MUX(0x5, "ETH_M5"), 146 KEEMBAY_MUX(0x6, "LCD_M6"), 147 KEEMBAY_MUX(0x7, "GPIO_M7")), 148 KEEMBAY_PIN_DESC(1, "GPIO1", 149 KEEMBAY_MUX(0x0, "I2S0_M0"), 150 KEEMBAY_MUX(0x1, "SD0_M1"), 151 KEEMBAY_MUX(0x2, "SLVDS0_M2"), 152 KEEMBAY_MUX(0x3, "I2C0_M3"), 153 KEEMBAY_MUX(0x4, "CAM_M4"), 154 KEEMBAY_MUX(0x5, "ETH_M5"), 155 KEEMBAY_MUX(0x6, "LCD_M6"), 156 KEEMBAY_MUX(0x7, "GPIO_M7")), 157 KEEMBAY_PIN_DESC(2, "GPIO2", 158 KEEMBAY_MUX(0x0, "I2S0_M0"), 159 KEEMBAY_MUX(0x1, "I2S0_M1"), 160 KEEMBAY_MUX(0x2, "SLVDS0_M2"), 161 KEEMBAY_MUX(0x3, "I2C1_M3"), 162 KEEMBAY_MUX(0x4, "CAM_M4"), 163 KEEMBAY_MUX(0x5, "ETH_M5"), 164 KEEMBAY_MUX(0x6, "LCD_M6"), 165 KEEMBAY_MUX(0x7, "GPIO_M7")), 166 KEEMBAY_PIN_DESC(3, "GPIO3", 167 KEEMBAY_MUX(0x0, "I2S0_M0"), 168 KEEMBAY_MUX(0x1, "I2S0_M1"), 169 KEEMBAY_MUX(0x2, "SLVDS0_M2"), 170 KEEMBAY_MUX(0x3, "I2C1_M3"), 171 KEEMBAY_MUX(0x4, "CAM_M4"), 172 KEEMBAY_MUX(0x5, "ETH_M5"), 173 KEEMBAY_MUX(0x6, "LCD_M6"), 174 KEEMBAY_MUX(0x7, "GPIO_M7")), 175 KEEMBAY_PIN_DESC(4, "GPIO4", 176 KEEMBAY_MUX(0x0, "I2S0_M0"), 177 KEEMBAY_MUX(0x1, "I2S0_M1"), 178 KEEMBAY_MUX(0x2, "SLVDS0_M2"), 179 KEEMBAY_MUX(0x3, "I2C2_M3"), 180 KEEMBAY_MUX(0x4, "CAM_M4"), 181 KEEMBAY_MUX(0x5, "ETH_M5"), 182 KEEMBAY_MUX(0x6, "LCD_M6"), 183 KEEMBAY_MUX(0x7, "GPIO_M7")), 184 KEEMBAY_PIN_DESC(5, "GPIO5", 185 KEEMBAY_MUX(0x0, "I2S0_M0"), 186 KEEMBAY_MUX(0x1, "I2S0_M1"), 187 KEEMBAY_MUX(0x2, "SLVDS0_M2"), 188 KEEMBAY_MUX(0x3, "I2C2_M3"), 189 KEEMBAY_MUX(0x4, "CAM_M4"), 190 KEEMBAY_MUX(0x5, "ETH_M5"), 191 KEEMBAY_MUX(0x6, "LCD_M6"), 192 KEEMBAY_MUX(0x7, "GPIO_M7")), 193 KEEMBAY_PIN_DESC(6, "GPIO6", 194 KEEMBAY_MUX(0x0, "I2S1_M0"), 195 KEEMBAY_MUX(0x1, "SD0_M1"), 196 KEEMBAY_MUX(0x2, "SLVDS0_M2"), 197 KEEMBAY_MUX(0x3, "I2C3_M3"), 198 KEEMBAY_MUX(0x4, "CAM_M4"), 199 KEEMBAY_MUX(0x5, "ETH_M5"), 200 KEEMBAY_MUX(0x6, "LCD_M6"), 201 KEEMBAY_MUX(0x7, "GPIO_M7")), 202 KEEMBAY_PIN_DESC(7, "GPIO7", 203 KEEMBAY_MUX(0x0, "I2S1_M0"), 204 KEEMBAY_MUX(0x1, "SD0_M1"), 205 KEEMBAY_MUX(0x2, "SLVDS0_M2"), 206 KEEMBAY_MUX(0x3, "I2C3_M3"), 207 KEEMBAY_MUX(0x4, "CAM_M4"), 208 KEEMBAY_MUX(0x5, "ETH_M5"), 209 KEEMBAY_MUX(0x6, "LCD_M6"), 210 KEEMBAY_MUX(0x7, "GPIO_M7")), 211 KEEMBAY_PIN_DESC(8, "GPIO8", 212 KEEMBAY_MUX(0x0, "I2S1_M0"), 213 KEEMBAY_MUX(0x1, "I2S1_M1"), 214 KEEMBAY_MUX(0x2, "SLVDS0_M2"), 215 KEEMBAY_MUX(0x3, "UART0_M3"), 216 KEEMBAY_MUX(0x4, "CAM_M4"), 217 KEEMBAY_MUX(0x5, "ETH_M5"), 218 KEEMBAY_MUX(0x6, "LCD_M6"), 219 KEEMBAY_MUX(0x7, "GPIO_M7")), 220 KEEMBAY_PIN_DESC(9, "GPIO9", 221 KEEMBAY_MUX(0x0, "I2S1_M0"), 222 KEEMBAY_MUX(0x1, "I2S1_M1"), 223 KEEMBAY_MUX(0x2, "PWM_M2"), 224 KEEMBAY_MUX(0x3, "UART0_M3"), 225 KEEMBAY_MUX(0x4, "CAM_M4"), 226 KEEMBAY_MUX(0x5, "ETH_M5"), 227 KEEMBAY_MUX(0x6, "LCD_M6"), 228 KEEMBAY_MUX(0x7, "GPIO_M7")), 229 KEEMBAY_PIN_DESC(10, "GPIO10", 230 KEEMBAY_MUX(0x0, "I2S2_M0"), 231 KEEMBAY_MUX(0x1, "SD0_M1"), 232 KEEMBAY_MUX(0x2, "PWM_M2"), 233 KEEMBAY_MUX(0x3, "UART0_M3"), 234 KEEMBAY_MUX(0x4, "CAM_M4"), 235 KEEMBAY_MUX(0x5, "ETH_M5"), 236 KEEMBAY_MUX(0x6, "LCD_M6"), 237 KEEMBAY_MUX(0x7, "GPIO_M7")), 238 KEEMBAY_PIN_DESC(11, "GPIO11", 239 KEEMBAY_MUX(0x0, "I2S2_M0"), 240 KEEMBAY_MUX(0x1, "SD0_M1"), 241 KEEMBAY_MUX(0x2, "PWM_M2"), 242 KEEMBAY_MUX(0x3, "UART0_M3"), 243 KEEMBAY_MUX(0x4, "CAM_M4"), 244 KEEMBAY_MUX(0x5, "ETH_M5"), 245 KEEMBAY_MUX(0x6, "LCD_M6"), 246 KEEMBAY_MUX(0x7, "GPIO_M7")), 247 KEEMBAY_PIN_DESC(12, "GPIO12", 248 KEEMBAY_MUX(0x0, "I2S2_M0"), 249 KEEMBAY_MUX(0x1, "I2S2_M1"), 250 KEEMBAY_MUX(0x2, "PWM_M2"), 251 KEEMBAY_MUX(0x3, "SPI0_M3"), 252 KEEMBAY_MUX(0x4, "CAM_M4"), 253 KEEMBAY_MUX(0x5, "ETH_M5"), 254 KEEMBAY_MUX(0x6, "LCD_M6"), 255 KEEMBAY_MUX(0x7, "GPIO_M7")), 256 KEEMBAY_PIN_DESC(13, "GPIO13", 257 KEEMBAY_MUX(0x0, "I2S2_M0"), 258 KEEMBAY_MUX(0x1, "I2S2_M1"), 259 KEEMBAY_MUX(0x2, "PWM_M2"), 260 KEEMBAY_MUX(0x3, "SPI0_M3"), 261 KEEMBAY_MUX(0x4, "CAM_M4"), 262 KEEMBAY_MUX(0x5, "ETH_M5"), 263 KEEMBAY_MUX(0x6, "LCD_M6"), 264 KEEMBAY_MUX(0x7, "GPIO_M7")), 265 KEEMBAY_PIN_DESC(14, "GPIO14", 266 KEEMBAY_MUX(0x0, "UART0_M0"), 267 KEEMBAY_MUX(0x1, "I2S3_M1"), 268 KEEMBAY_MUX(0x2, "PWM_M2"), 269 KEEMBAY_MUX(0x3, "SD1_M3"), 270 KEEMBAY_MUX(0x4, "CAM_M4"), 271 KEEMBAY_MUX(0x5, "ETH_M5"), 272 KEEMBAY_MUX(0x6, "LCD_M6"), 273 KEEMBAY_MUX(0x7, "GPIO_M7")), 274 KEEMBAY_PIN_DESC(15, "GPIO15", 275 KEEMBAY_MUX(0x0, "UART0_M0"), 276 KEEMBAY_MUX(0x1, "I2S3_M1"), 277 KEEMBAY_MUX(0x2, "UART0_M2"), 278 KEEMBAY_MUX(0x3, "SD1_M3"), 279 KEEMBAY_MUX(0x4, "CAM_M4"), 280 KEEMBAY_MUX(0x5, "SPI1_M5"), 281 KEEMBAY_MUX(0x6, "LCD_M6"), 282 KEEMBAY_MUX(0x7, "GPIO_M7")), 283 KEEMBAY_PIN_DESC(16, "GPIO16", 284 KEEMBAY_MUX(0x0, "UART0_M0"), 285 KEEMBAY_MUX(0x1, "I2S3_M1"), 286 KEEMBAY_MUX(0x2, "UART0_M2"), 287 KEEMBAY_MUX(0x3, "SD1_M3"), 288 KEEMBAY_MUX(0x4, "CAM_M4"), 289 KEEMBAY_MUX(0x5, "SPI1_M5"), 290 KEEMBAY_MUX(0x6, "LCD_M6"), 291 KEEMBAY_MUX(0x7, "GPIO_M7")), 292 KEEMBAY_PIN_DESC(17, "GPIO17", 293 KEEMBAY_MUX(0x0, "UART0_M0"), 294 KEEMBAY_MUX(0x1, "I2S3_M1"), 295 KEEMBAY_MUX(0x2, "I2S3_M2"), 296 KEEMBAY_MUX(0x3, "SD1_M3"), 297 KEEMBAY_MUX(0x4, "CAM_M4"), 298 KEEMBAY_MUX(0x5, "SPI1_M5"), 299 KEEMBAY_MUX(0x6, "LCD_M6"), 300 KEEMBAY_MUX(0x7, "GPIO_M7")), 301 KEEMBAY_PIN_DESC(18, "GPIO18", 302 KEEMBAY_MUX(0x0, "UART1_M0"), 303 KEEMBAY_MUX(0x1, "SPI0_M1"), 304 KEEMBAY_MUX(0x2, "I2S3_M2"), 305 KEEMBAY_MUX(0x3, "SD1_M3"), 306 KEEMBAY_MUX(0x4, "CAM_M4"), 307 KEEMBAY_MUX(0x5, "SPI1_M5"), 308 KEEMBAY_MUX(0x6, "LCD_M6"), 309 KEEMBAY_MUX(0x7, "GPIO_M7")), 310 KEEMBAY_PIN_DESC(19, "GPIO19", 311 KEEMBAY_MUX(0x0, "UART1_M0"), 312 KEEMBAY_MUX(0x1, "LCD_M1"), 313 KEEMBAY_MUX(0x2, "DEBUG_M2"), 314 KEEMBAY_MUX(0x3, "SD1_M3"), 315 KEEMBAY_MUX(0x4, "CAM_M4"), 316 KEEMBAY_MUX(0x5, "SPI1_M5"), 317 KEEMBAY_MUX(0x6, "LCD_M6"), 318 KEEMBAY_MUX(0x7, "GPIO_M7")), 319 KEEMBAY_PIN_DESC(20, "GPIO20", 320 KEEMBAY_MUX(0x0, "UART1_M0"), 321 KEEMBAY_MUX(0x1, "LCD_M1"), 322 KEEMBAY_MUX(0x2, "DEBUG_M2"), 323 KEEMBAY_MUX(0x3, "CPR_M3"), 324 KEEMBAY_MUX(0x4, "CAM_M4"), 325 KEEMBAY_MUX(0x5, "SPI1_M5"), 326 KEEMBAY_MUX(0x6, "SLVDS0_M6"), 327 KEEMBAY_MUX(0x7, "GPIO_M7")), 328 KEEMBAY_PIN_DESC(21, "GPIO21", 329 KEEMBAY_MUX(0x0, "UART1_M0"), 330 KEEMBAY_MUX(0x1, "LCD_M1"), 331 KEEMBAY_MUX(0x2, "DEBUG_M2"), 332 KEEMBAY_MUX(0x3, "CPR_M3"), 333 KEEMBAY_MUX(0x4, "CAM_M4"), 334 KEEMBAY_MUX(0x5, "I3C0_M5"), 335 KEEMBAY_MUX(0x6, "SLVDS0_M6"), 336 KEEMBAY_MUX(0x7, "GPIO_M7")), 337 KEEMBAY_PIN_DESC(22, "GPIO22", 338 KEEMBAY_MUX(0x0, "I2C0_M0"), 339 KEEMBAY_MUX(0x1, "UART2_M1"), 340 KEEMBAY_MUX(0x2, "DEBUG_M2"), 341 KEEMBAY_MUX(0x3, "CPR_M3"), 342 KEEMBAY_MUX(0x4, "CAM_M4"), 343 KEEMBAY_MUX(0x5, "I3C0_M5"), 344 KEEMBAY_MUX(0x6, "SLVDS0_M6"), 345 KEEMBAY_MUX(0x7, "GPIO_M7")), 346 KEEMBAY_PIN_DESC(23, "GPIO23", 347 KEEMBAY_MUX(0x0, "I2C0_M0"), 348 KEEMBAY_MUX(0x1, "UART2_M1"), 349 KEEMBAY_MUX(0x2, "DEBUG_M2"), 350 KEEMBAY_MUX(0x3, "CPR_M3"), 351 KEEMBAY_MUX(0x4, "CAM_M4"), 352 KEEMBAY_MUX(0x5, "I3C1_M5"), 353 KEEMBAY_MUX(0x6, "SLVDS0_M6"), 354 KEEMBAY_MUX(0x7, "GPIO_M7")), 355 KEEMBAY_PIN_DESC(24, "GPIO24", 356 KEEMBAY_MUX(0x0, "I2C1_M0"), 357 KEEMBAY_MUX(0x1, "UART2_M1"), 358 KEEMBAY_MUX(0x2, "DEBUG_M2"), 359 KEEMBAY_MUX(0x3, "CPR_M3"), 360 KEEMBAY_MUX(0x4, "CAM_M4"), 361 KEEMBAY_MUX(0x5, "I3C1_M5"), 362 KEEMBAY_MUX(0x6, "SLVDS0_M6"), 363 KEEMBAY_MUX(0x7, "GPIO_M7")), 364 KEEMBAY_PIN_DESC(25, "GPIO25", 365 KEEMBAY_MUX(0x0, "I2C1_M0"), 366 KEEMBAY_MUX(0x1, "UART2_M1"), 367 KEEMBAY_MUX(0x2, "SPI0_M2"), 368 KEEMBAY_MUX(0x3, "CPR_M3"), 369 KEEMBAY_MUX(0x4, "CAM_M4"), 370 KEEMBAY_MUX(0x5, "I3C2_M5"), 371 KEEMBAY_MUX(0x6, "SLVDS0_M6"), 372 KEEMBAY_MUX(0x7, "GPIO_M7")), 373 KEEMBAY_PIN_DESC(26, "GPIO26", 374 KEEMBAY_MUX(0x0, "SPI0_M0"), 375 KEEMBAY_MUX(0x1, "I2C2_M1"), 376 KEEMBAY_MUX(0x2, "UART0_M2"), 377 KEEMBAY_MUX(0x3, "DSU_M3"), 378 KEEMBAY_MUX(0x4, "CAM_M4"), 379 KEEMBAY_MUX(0x5, "I3C2_M5"), 380 KEEMBAY_MUX(0x6, "SLVDS0_M6"), 381 KEEMBAY_MUX(0x7, "GPIO_M7")), 382 KEEMBAY_PIN_DESC(27, "GPIO27", 383 KEEMBAY_MUX(0x0, "SPI0_M0"), 384 KEEMBAY_MUX(0x1, "I2C2_M1"), 385 KEEMBAY_MUX(0x2, "UART0_M2"), 386 KEEMBAY_MUX(0x3, "DSU_M3"), 387 KEEMBAY_MUX(0x4, "CAM_M4"), 388 KEEMBAY_MUX(0x5, "I3C0_M5"), 389 KEEMBAY_MUX(0x6, "SLVDS0_M6"), 390 KEEMBAY_MUX(0x7, "GPIO_M7")), 391 KEEMBAY_PIN_DESC(28, "GPIO28", 392 KEEMBAY_MUX(0x0, "SPI0_M0"), 393 KEEMBAY_MUX(0x1, "I2C3_M1"), 394 KEEMBAY_MUX(0x2, "UART0_M2"), 395 KEEMBAY_MUX(0x3, "PWM_M3"), 396 KEEMBAY_MUX(0x4, "CAM_M4"), 397 KEEMBAY_MUX(0x5, "I3C1_M5"), 398 KEEMBAY_MUX(0x6, "SLVDS0_M6"), 399 KEEMBAY_MUX(0x7, "GPIO_M7")), 400 KEEMBAY_PIN_DESC(29, "GPIO29", 401 KEEMBAY_MUX(0x0, "SPI0_M0"), 402 KEEMBAY_MUX(0x1, "I2C3_M1"), 403 KEEMBAY_MUX(0x2, "UART0_M2"), 404 KEEMBAY_MUX(0x3, "PWM_M3"), 405 KEEMBAY_MUX(0x4, "CAM_M4"), 406 KEEMBAY_MUX(0x5, "I3C2_M5"), 407 KEEMBAY_MUX(0x6, "SLVDS1_M6"), 408 KEEMBAY_MUX(0x7, "GPIO_M7")), 409 KEEMBAY_PIN_DESC(30, "GPIO30", 410 KEEMBAY_MUX(0x0, "SPI0_M0"), 411 KEEMBAY_MUX(0x1, "I2S0_M1"), 412 KEEMBAY_MUX(0x2, "I2C4_M2"), 413 KEEMBAY_MUX(0x3, "PWM_M3"), 414 KEEMBAY_MUX(0x4, "CAM_M4"), 415 KEEMBAY_MUX(0x5, "LCD_M5"), 416 KEEMBAY_MUX(0x6, "SLVDS1_M6"), 417 KEEMBAY_MUX(0x7, "GPIO_M7")), 418 KEEMBAY_PIN_DESC(31, "GPIO31", 419 KEEMBAY_MUX(0x0, "SPI0_M0"), 420 KEEMBAY_MUX(0x1, "I2S0_M1"), 421 KEEMBAY_MUX(0x2, "I2C4_M2"), 422 KEEMBAY_MUX(0x3, "PWM_M3"), 423 KEEMBAY_MUX(0x4, "CAM_M4"), 424 KEEMBAY_MUX(0x5, "UART1_M5"), 425 KEEMBAY_MUX(0x6, "SLVDS1_M6"), 426 KEEMBAY_MUX(0x7, "GPIO_M7")), 427 KEEMBAY_PIN_DESC(32, "GPIO32", 428 KEEMBAY_MUX(0x0, "SD0_M0"), 429 KEEMBAY_MUX(0x1, "SPI0_M1"), 430 KEEMBAY_MUX(0x2, "UART1_M2"), 431 KEEMBAY_MUX(0x3, "PWM_M3"), 432 KEEMBAY_MUX(0x4, "CAM_M4"), 433 KEEMBAY_MUX(0x5, "PCIE_M5"), 434 KEEMBAY_MUX(0x6, "SLVDS1_M6"), 435 KEEMBAY_MUX(0x7, "GPIO_M7")), 436 KEEMBAY_PIN_DESC(33, "GPIO33", 437 KEEMBAY_MUX(0x0, "SD0_M0"), 438 KEEMBAY_MUX(0x1, "SPI0_M1"), 439 KEEMBAY_MUX(0x2, "UART1_M2"), 440 KEEMBAY_MUX(0x3, "PWM_M3"), 441 KEEMBAY_MUX(0x4, "CAM_M4"), 442 KEEMBAY_MUX(0x5, "PCIE_M5"), 443 KEEMBAY_MUX(0x6, "SLVDS1_M6"), 444 KEEMBAY_MUX(0x7, "GPIO_M7")), 445 KEEMBAY_PIN_DESC(34, "GPIO34", 446 KEEMBAY_MUX(0x0, "SD0_M0"), 447 KEEMBAY_MUX(0x1, "SPI0_M1"), 448 KEEMBAY_MUX(0x2, "I2C0_M2"), 449 KEEMBAY_MUX(0x3, "UART1_M3"), 450 KEEMBAY_MUX(0x4, "CAM_M4"), 451 KEEMBAY_MUX(0x5, "I2S0_M5"), 452 KEEMBAY_MUX(0x6, "SLVDS1_M6"), 453 KEEMBAY_MUX(0x7, "GPIO_M7")), 454 KEEMBAY_PIN_DESC(35, "GPIO35", 455 KEEMBAY_MUX(0x0, "SD0_M0"), 456 KEEMBAY_MUX(0x1, "PCIE_M1"), 457 KEEMBAY_MUX(0x2, "I2C0_M2"), 458 KEEMBAY_MUX(0x3, "UART1_M3"), 459 KEEMBAY_MUX(0x4, "CAM_M4"), 460 KEEMBAY_MUX(0x5, "I2S0_M5"), 461 KEEMBAY_MUX(0x6, "SLVDS1_M6"), 462 KEEMBAY_MUX(0x7, "GPIO_M7")), 463 KEEMBAY_PIN_DESC(36, "GPIO36", 464 KEEMBAY_MUX(0x0, "SD0_M0"), 465 KEEMBAY_MUX(0x1, "SPI3_M1"), 466 KEEMBAY_MUX(0x2, "I2C1_M2"), 467 KEEMBAY_MUX(0x3, "DEBUG_M3"), 468 KEEMBAY_MUX(0x4, "CAM_M4"), 469 KEEMBAY_MUX(0x5, "I2S0_M5"), 470 KEEMBAY_MUX(0x6, "SLVDS1_M6"), 471 KEEMBAY_MUX(0x7, "GPIO_M7")), 472 KEEMBAY_PIN_DESC(37, "GPIO37", 473 KEEMBAY_MUX(0x0, "SD0_M0"), 474 KEEMBAY_MUX(0x1, "SPI3_M1"), 475 KEEMBAY_MUX(0x2, "I2C1_M2"), 476 KEEMBAY_MUX(0x3, "DEBUG_M3"), 477 KEEMBAY_MUX(0x4, "CAM_M4"), 478 KEEMBAY_MUX(0x5, "I2S0_M5"), 479 KEEMBAY_MUX(0x6, "SLVDS1_M6"), 480 KEEMBAY_MUX(0x7, "GPIO_M7")), 481 KEEMBAY_PIN_DESC(38, "GPIO38", 482 KEEMBAY_MUX(0x0, "I3C1_M0"), 483 KEEMBAY_MUX(0x1, "SPI3_M1"), 484 KEEMBAY_MUX(0x2, "UART3_M2"), 485 KEEMBAY_MUX(0x3, "DEBUG_M3"), 486 KEEMBAY_MUX(0x4, "CAM_M4"), 487 KEEMBAY_MUX(0x5, "LCD_M5"), 488 KEEMBAY_MUX(0x6, "I2C2_M6"), 489 KEEMBAY_MUX(0x7, "GPIO_M7")), 490 KEEMBAY_PIN_DESC(39, "GPIO39", 491 KEEMBAY_MUX(0x0, "I3C1_M0"), 492 KEEMBAY_MUX(0x1, "SPI3_M1"), 493 KEEMBAY_MUX(0x2, "UART3_M2"), 494 KEEMBAY_MUX(0x3, "DEBUG_M3"), 495 KEEMBAY_MUX(0x4, "CAM_M4"), 496 KEEMBAY_MUX(0x5, "LCD_M5"), 497 KEEMBAY_MUX(0x6, "I2C2_M6"), 498 KEEMBAY_MUX(0x7, "GPIO_M7")), 499 KEEMBAY_PIN_DESC(40, "GPIO40", 500 KEEMBAY_MUX(0x0, "I2S2_M0"), 501 KEEMBAY_MUX(0x1, "SPI3_M1"), 502 KEEMBAY_MUX(0x2, "UART3_M2"), 503 KEEMBAY_MUX(0x3, "DEBUG_M3"), 504 KEEMBAY_MUX(0x4, "CAM_M4"), 505 KEEMBAY_MUX(0x5, "LCD_M5"), 506 KEEMBAY_MUX(0x6, "I2C3_M6"), 507 KEEMBAY_MUX(0x7, "GPIO_M7")), 508 KEEMBAY_PIN_DESC(41, "GPIO41", 509 KEEMBAY_MUX(0x0, "ETH_M0"), 510 KEEMBAY_MUX(0x1, "SPI3_M1"), 511 KEEMBAY_MUX(0x2, "SPI3_M2"), 512 KEEMBAY_MUX(0x3, "DEBUG_M3"), 513 KEEMBAY_MUX(0x4, "CAM_M4"), 514 KEEMBAY_MUX(0x5, "LCD_M5"), 515 KEEMBAY_MUX(0x6, "I2C3_M6"), 516 KEEMBAY_MUX(0x7, "GPIO_M7")), 517 KEEMBAY_PIN_DESC(42, "GPIO42", 518 KEEMBAY_MUX(0x0, "ETH_M0"), 519 KEEMBAY_MUX(0x1, "SD1_M1"), 520 KEEMBAY_MUX(0x2, "SPI3_M2"), 521 KEEMBAY_MUX(0x3, "CPR_M3"), 522 KEEMBAY_MUX(0x4, "CAM_M4"), 523 KEEMBAY_MUX(0x5, "LCD_M5"), 524 KEEMBAY_MUX(0x6, "I2C4_M6"), 525 KEEMBAY_MUX(0x7, "GPIO_M7")), 526 KEEMBAY_PIN_DESC(43, "GPIO43", 527 KEEMBAY_MUX(0x0, "ETH_M0"), 528 KEEMBAY_MUX(0x1, "SD1_M1"), 529 KEEMBAY_MUX(0x2, "SPI3_M2"), 530 KEEMBAY_MUX(0x3, "CPR_M3"), 531 KEEMBAY_MUX(0x4, "I2S0_M4"), 532 KEEMBAY_MUX(0x5, "LCD_M5"), 533 KEEMBAY_MUX(0x6, "I2C4_M6"), 534 KEEMBAY_MUX(0x7, "GPIO_M7")), 535 KEEMBAY_PIN_DESC(44, "GPIO44", 536 KEEMBAY_MUX(0x0, "ETH_M0"), 537 KEEMBAY_MUX(0x1, "SD1_M1"), 538 KEEMBAY_MUX(0x2, "SPI0_M2"), 539 KEEMBAY_MUX(0x3, "CPR_M3"), 540 KEEMBAY_MUX(0x4, "I2S0_M4"), 541 KEEMBAY_MUX(0x5, "LCD_M5"), 542 KEEMBAY_MUX(0x6, "CAM_M6"), 543 KEEMBAY_MUX(0x7, "GPIO_M7")), 544 KEEMBAY_PIN_DESC(45, "GPIO45", 545 KEEMBAY_MUX(0x0, "ETH_M0"), 546 KEEMBAY_MUX(0x1, "SD1_M1"), 547 KEEMBAY_MUX(0x2, "SPI0_M2"), 548 KEEMBAY_MUX(0x3, "CPR_M3"), 549 KEEMBAY_MUX(0x4, "I2S0_M4"), 550 KEEMBAY_MUX(0x5, "LCD_M5"), 551 KEEMBAY_MUX(0x6, "CAM_M6"), 552 KEEMBAY_MUX(0x7, "GPIO_M7")), 553 KEEMBAY_PIN_DESC(46, "GPIO46", 554 KEEMBAY_MUX(0x0, "ETH_M0"), 555 KEEMBAY_MUX(0x1, "SD1_M1"), 556 KEEMBAY_MUX(0x2, "SPI0_M2"), 557 KEEMBAY_MUX(0x3, "TPIU_M3"), 558 KEEMBAY_MUX(0x4, "I2S0_M4"), 559 KEEMBAY_MUX(0x5, "LCD_M5"), 560 KEEMBAY_MUX(0x6, "CAM_M6"), 561 KEEMBAY_MUX(0x7, "GPIO_M7")), 562 KEEMBAY_PIN_DESC(47, "GPIO47", 563 KEEMBAY_MUX(0x0, "ETH_M0"), 564 KEEMBAY_MUX(0x1, "SD1_M1"), 565 KEEMBAY_MUX(0x2, "SPI0_M2"), 566 KEEMBAY_MUX(0x3, "TPIU_M3"), 567 KEEMBAY_MUX(0x4, "I2S0_M4"), 568 KEEMBAY_MUX(0x5, "LCD_M5"), 569 KEEMBAY_MUX(0x6, "CAM_M6"), 570 KEEMBAY_MUX(0x7, "GPIO_M7")), 571 KEEMBAY_PIN_DESC(48, "GPIO48", 572 KEEMBAY_MUX(0x0, "ETH_M0"), 573 KEEMBAY_MUX(0x1, "SPI2_M1"), 574 KEEMBAY_MUX(0x2, "UART2_M2"), 575 KEEMBAY_MUX(0x3, "TPIU_M3"), 576 KEEMBAY_MUX(0x4, "I2S0_M4"), 577 KEEMBAY_MUX(0x5, "LCD_M5"), 578 KEEMBAY_MUX(0x6, "CAM_M6"), 579 KEEMBAY_MUX(0x7, "GPIO_M7")), 580 KEEMBAY_PIN_DESC(49, "GPIO49", 581 KEEMBAY_MUX(0x0, "ETH_M0"), 582 KEEMBAY_MUX(0x1, "SPI2_M1"), 583 KEEMBAY_MUX(0x2, "UART2_M2"), 584 KEEMBAY_MUX(0x3, "TPIU_M3"), 585 KEEMBAY_MUX(0x4, "I2S1_M4"), 586 KEEMBAY_MUX(0x5, "LCD_M5"), 587 KEEMBAY_MUX(0x6, "CAM_M6"), 588 KEEMBAY_MUX(0x7, "GPIO_M7")), 589 KEEMBAY_PIN_DESC(50, "GPIO50", 590 KEEMBAY_MUX(0x0, "ETH_M0"), 591 KEEMBAY_MUX(0x1, "SPI2_M1"), 592 KEEMBAY_MUX(0x2, "UART2_M2"), 593 KEEMBAY_MUX(0x3, "TPIU_M3"), 594 KEEMBAY_MUX(0x4, "I2S1_M4"), 595 KEEMBAY_MUX(0x5, "LCD_M5"), 596 KEEMBAY_MUX(0x6, "CAM_M6"), 597 KEEMBAY_MUX(0x7, "GPIO_M7")), 598 KEEMBAY_PIN_DESC(51, "GPIO51", 599 KEEMBAY_MUX(0x0, "ETH_M0"), 600 KEEMBAY_MUX(0x1, "SPI2_M1"), 601 KEEMBAY_MUX(0x2, "UART2_M2"), 602 KEEMBAY_MUX(0x3, "TPIU_M3"), 603 KEEMBAY_MUX(0x4, "I2S1_M4"), 604 KEEMBAY_MUX(0x5, "LCD_M5"), 605 KEEMBAY_MUX(0x6, "CAM_M6"), 606 KEEMBAY_MUX(0x7, "GPIO_M7")), 607 KEEMBAY_PIN_DESC(52, "GPIO52", 608 KEEMBAY_MUX(0x0, "ETH_M0"), 609 KEEMBAY_MUX(0x1, "SPI2_M1"), 610 KEEMBAY_MUX(0x2, "SD0_M2"), 611 KEEMBAY_MUX(0x3, "TPIU_M3"), 612 KEEMBAY_MUX(0x4, "I2S1_M4"), 613 KEEMBAY_MUX(0x5, "LCD_M5"), 614 KEEMBAY_MUX(0x6, "CAM_M6"), 615 KEEMBAY_MUX(0x7, "GPIO_M7")), 616 KEEMBAY_PIN_DESC(53, "GPIO53", 617 KEEMBAY_MUX(0x0, "ETH_M0"), 618 KEEMBAY_MUX(0x1, "SPI2_M1"), 619 KEEMBAY_MUX(0x2, "SD0_M2"), 620 KEEMBAY_MUX(0x3, "TPIU_M3"), 621 KEEMBAY_MUX(0x4, "I2S2_M4"), 622 KEEMBAY_MUX(0x5, "LCD_M5"), 623 KEEMBAY_MUX(0x6, "CAM_M6"), 624 KEEMBAY_MUX(0x7, "GPIO_M7")), 625 KEEMBAY_PIN_DESC(54, "GPIO54", 626 KEEMBAY_MUX(0x0, "ETH_M0"), 627 KEEMBAY_MUX(0x1, "SPI2_M1"), 628 KEEMBAY_MUX(0x2, "SD0_M2"), 629 KEEMBAY_MUX(0x3, "TPIU_M3"), 630 KEEMBAY_MUX(0x4, "I2S2_M4"), 631 KEEMBAY_MUX(0x5, "LCD_M5"), 632 KEEMBAY_MUX(0x6, "CAM_M6"), 633 KEEMBAY_MUX(0x7, "GPIO_M7")), 634 KEEMBAY_PIN_DESC(55, "GPIO55", 635 KEEMBAY_MUX(0x0, "ETH_M0"), 636 KEEMBAY_MUX(0x1, "SPI2_M1"), 637 KEEMBAY_MUX(0x2, "SD1_M2"), 638 KEEMBAY_MUX(0x3, "TPIU_M3"), 639 KEEMBAY_MUX(0x4, "I2S2_M4"), 640 KEEMBAY_MUX(0x5, "LCD_M5"), 641 KEEMBAY_MUX(0x6, "CAM_M6"), 642 KEEMBAY_MUX(0x7, "GPIO_M7")), 643 KEEMBAY_PIN_DESC(56, "GPIO56", 644 KEEMBAY_MUX(0x0, "ETH_M0"), 645 KEEMBAY_MUX(0x1, "SPI2_M1"), 646 KEEMBAY_MUX(0x2, "SD1_M2"), 647 KEEMBAY_MUX(0x3, "TPIU_M3"), 648 KEEMBAY_MUX(0x4, "I2S2_M4"), 649 KEEMBAY_MUX(0x5, "LCD_M5"), 650 KEEMBAY_MUX(0x6, "CAM_M6"), 651 KEEMBAY_MUX(0x7, "GPIO_M7")), 652 KEEMBAY_PIN_DESC(57, "GPIO57", 653 KEEMBAY_MUX(0x0, "SPI1_M0"), 654 KEEMBAY_MUX(0x1, "I2S1_M1"), 655 KEEMBAY_MUX(0x2, "SD1_M2"), 656 KEEMBAY_MUX(0x3, "TPIU_M3"), 657 KEEMBAY_MUX(0x4, "UART0_M4"), 658 KEEMBAY_MUX(0x5, "LCD_M5"), 659 KEEMBAY_MUX(0x6, "CAM_M6"), 660 KEEMBAY_MUX(0x7, "GPIO_M7")), 661 KEEMBAY_PIN_DESC(58, "GPIO58", 662 KEEMBAY_MUX(0x0, "SPI1_M0"), 663 KEEMBAY_MUX(0x1, "ETH_M1"), 664 KEEMBAY_MUX(0x2, "SD0_M2"), 665 KEEMBAY_MUX(0x3, "TPIU_M3"), 666 KEEMBAY_MUX(0x4, "UART0_M4"), 667 KEEMBAY_MUX(0x5, "LCD_M5"), 668 KEEMBAY_MUX(0x6, "CAM_M6"), 669 KEEMBAY_MUX(0x7, "GPIO_M7")), 670 KEEMBAY_PIN_DESC(59, "GPIO59", 671 KEEMBAY_MUX(0x0, "SPI1_M0"), 672 KEEMBAY_MUX(0x1, "ETH_M1"), 673 KEEMBAY_MUX(0x2, "SD0_M2"), 674 KEEMBAY_MUX(0x3, "TPIU_M3"), 675 KEEMBAY_MUX(0x4, "UART0_M4"), 676 KEEMBAY_MUX(0x5, "LCD_M5"), 677 KEEMBAY_MUX(0x6, "CAM_M6"), 678 KEEMBAY_MUX(0x7, "GPIO_M7")), 679 KEEMBAY_PIN_DESC(60, "GPIO60", 680 KEEMBAY_MUX(0x0, "SPI1_M0"), 681 KEEMBAY_MUX(0x1, "ETH_M1"), 682 KEEMBAY_MUX(0x2, "I3C1_M2"), 683 KEEMBAY_MUX(0x3, "TPIU_M3"), 684 KEEMBAY_MUX(0x4, "UART0_M4"), 685 KEEMBAY_MUX(0x5, "LCD_M5"), 686 KEEMBAY_MUX(0x6, "CAM_M6"), 687 KEEMBAY_MUX(0x7, "GPIO_M7")), 688 KEEMBAY_PIN_DESC(61, "GPIO61", 689 KEEMBAY_MUX(0x0, "SPI1_M0"), 690 KEEMBAY_MUX(0x1, "ETH_M1"), 691 KEEMBAY_MUX(0x2, "SD0_M2"), 692 KEEMBAY_MUX(0x3, "TPIU_M3"), 693 KEEMBAY_MUX(0x4, "UART1_M4"), 694 KEEMBAY_MUX(0x5, "LCD_M5"), 695 KEEMBAY_MUX(0x6, "CAM_M6"), 696 KEEMBAY_MUX(0x7, "GPIO_M7")), 697 KEEMBAY_PIN_DESC(62, "GPIO62", 698 KEEMBAY_MUX(0x0, "SPI1_M0"), 699 KEEMBAY_MUX(0x1, "ETH_M1"), 700 KEEMBAY_MUX(0x2, "SD1_M2"), 701 KEEMBAY_MUX(0x3, "TPIU_M3"), 702 KEEMBAY_MUX(0x4, "UART1_M4"), 703 KEEMBAY_MUX(0x5, "LCD_M5"), 704 KEEMBAY_MUX(0x6, "CAM_M6"), 705 KEEMBAY_MUX(0x7, "GPIO_M7")), 706 KEEMBAY_PIN_DESC(63, "GPIO63", 707 KEEMBAY_MUX(0x0, "I2S1_M0"), 708 KEEMBAY_MUX(0x1, "SPI1_M1"), 709 KEEMBAY_MUX(0x2, "SD1_M2"), 710 KEEMBAY_MUX(0x3, "TPIU_M3"), 711 KEEMBAY_MUX(0x4, "UART1_M4"), 712 KEEMBAY_MUX(0x5, "LCD_M5"), 713 KEEMBAY_MUX(0x6, "CAM_M6"), 714 KEEMBAY_MUX(0x7, "GPIO_M7")), 715 KEEMBAY_PIN_DESC(64, "GPIO64", 716 KEEMBAY_MUX(0x0, "I2S2_M0"), 717 KEEMBAY_MUX(0x1, "SPI1_M1"), 718 KEEMBAY_MUX(0x2, "ETH_M2"), 719 KEEMBAY_MUX(0x3, "TPIU_M3"), 720 KEEMBAY_MUX(0x4, "UART1_M4"), 721 KEEMBAY_MUX(0x5, "LCD_M5"), 722 KEEMBAY_MUX(0x6, "CAM_M6"), 723 KEEMBAY_MUX(0x7, "GPIO_M7")), 724 KEEMBAY_PIN_DESC(65, "GPIO65", 725 KEEMBAY_MUX(0x0, "I3C0_M0"), 726 KEEMBAY_MUX(0x1, "SPI1_M1"), 727 KEEMBAY_MUX(0x2, "SD1_M2"), 728 KEEMBAY_MUX(0x3, "TPIU_M3"), 729 KEEMBAY_MUX(0x4, "SPI0_M4"), 730 KEEMBAY_MUX(0x5, "LCD_M5"), 731 KEEMBAY_MUX(0x6, "CAM_M6"), 732 KEEMBAY_MUX(0x7, "GPIO_M7")), 733 KEEMBAY_PIN_DESC(66, "GPIO66", 734 KEEMBAY_MUX(0x0, "I3C0_M0"), 735 KEEMBAY_MUX(0x1, "ETH_M1"), 736 KEEMBAY_MUX(0x2, "I2C0_M2"), 737 KEEMBAY_MUX(0x3, "TPIU_M3"), 738 KEEMBAY_MUX(0x4, "SPI0_M4"), 739 KEEMBAY_MUX(0x5, "LCD_M5"), 740 KEEMBAY_MUX(0x6, "CAM_M6"), 741 KEEMBAY_MUX(0x7, "GPIO_M7")), 742 KEEMBAY_PIN_DESC(67, "GPIO67", 743 KEEMBAY_MUX(0x0, "I3C1_M0"), 744 KEEMBAY_MUX(0x1, "ETH_M1"), 745 KEEMBAY_MUX(0x2, "I2C0_M2"), 746 KEEMBAY_MUX(0x3, "TPIU_M3"), 747 KEEMBAY_MUX(0x4, "SPI0_M4"), 748 KEEMBAY_MUX(0x5, "LCD_M5"), 749 KEEMBAY_MUX(0x6, "I2S3_M6"), 750 KEEMBAY_MUX(0x7, "GPIO_M7")), 751 KEEMBAY_PIN_DESC(68, "GPIO68", 752 KEEMBAY_MUX(0x0, "I3C1_M0"), 753 KEEMBAY_MUX(0x1, "ETH_M1"), 754 KEEMBAY_MUX(0x2, "I2C1_M2"), 755 KEEMBAY_MUX(0x3, "TPIU_M3"), 756 KEEMBAY_MUX(0x4, "SPI0_M4"), 757 KEEMBAY_MUX(0x5, "LCD_M5"), 758 KEEMBAY_MUX(0x6, "I2S3_M6"), 759 KEEMBAY_MUX(0x7, "GPIO_M7")), 760 KEEMBAY_PIN_DESC(69, "GPIO69", 761 KEEMBAY_MUX(0x0, "I3C2_M0"), 762 KEEMBAY_MUX(0x1, "ETH_M1"), 763 KEEMBAY_MUX(0x2, "I2C1_M2"), 764 KEEMBAY_MUX(0x3, "TPIU_M3"), 765 KEEMBAY_MUX(0x4, "SPI0_M4"), 766 KEEMBAY_MUX(0x5, "LCD_M5"), 767 KEEMBAY_MUX(0x6, "I2S3_M6"), 768 KEEMBAY_MUX(0x7, "GPIO_M7")), 769 KEEMBAY_PIN_DESC(70, "GPIO70", 770 KEEMBAY_MUX(0x0, "I3C2_M0"), 771 KEEMBAY_MUX(0x1, "ETH_M1"), 772 KEEMBAY_MUX(0x2, "SPI0_M2"), 773 KEEMBAY_MUX(0x3, "TPIU_M3"), 774 KEEMBAY_MUX(0x4, "SD0_M4"), 775 KEEMBAY_MUX(0x5, "LCD_M5"), 776 KEEMBAY_MUX(0x6, "I2S3_M6"), 777 KEEMBAY_MUX(0x7, "GPIO_M7")), 778 KEEMBAY_PIN_DESC(71, "GPIO71", 779 KEEMBAY_MUX(0x0, "I3C0_M0"), 780 KEEMBAY_MUX(0x1, "ETH_M1"), 781 KEEMBAY_MUX(0x2, "SLVDS1_M2"), 782 KEEMBAY_MUX(0x3, "TPIU_M3"), 783 KEEMBAY_MUX(0x4, "SD0_M4"), 784 KEEMBAY_MUX(0x5, "LCD_M5"), 785 KEEMBAY_MUX(0x6, "I2S3_M6"), 786 KEEMBAY_MUX(0x7, "GPIO_M7")), 787 KEEMBAY_PIN_DESC(72, "GPIO72", 788 KEEMBAY_MUX(0x0, "I3C1_M0"), 789 KEEMBAY_MUX(0x1, "ETH_M1"), 790 KEEMBAY_MUX(0x2, "SLVDS1_M2"), 791 KEEMBAY_MUX(0x3, "TPIU_M3"), 792 KEEMBAY_MUX(0x4, "SD0_M4"), 793 KEEMBAY_MUX(0x5, "LCD_M5"), 794 KEEMBAY_MUX(0x6, "UART2_M6"), 795 KEEMBAY_MUX(0x7, "GPIO_M7")), 796 KEEMBAY_PIN_DESC(73, "GPIO73", 797 KEEMBAY_MUX(0x0, "I3C2_M0"), 798 KEEMBAY_MUX(0x1, "ETH_M1"), 799 KEEMBAY_MUX(0x2, "SLVDS1_M2"), 800 KEEMBAY_MUX(0x3, "TPIU_M3"), 801 KEEMBAY_MUX(0x4, "SD0_M4"), 802 KEEMBAY_MUX(0x5, "LCD_M5"), 803 KEEMBAY_MUX(0x6, "UART2_M6"), 804 KEEMBAY_MUX(0x7, "GPIO_M7")), 805 KEEMBAY_PIN_DESC(74, "GPIO74", 806 KEEMBAY_MUX(0x0, "I3C0_M0"), 807 KEEMBAY_MUX(0x1, "ETH_M1"), 808 KEEMBAY_MUX(0x2, "SLVDS1_M2"), 809 KEEMBAY_MUX(0x3, "TPIU_M3"), 810 KEEMBAY_MUX(0x4, "SD0_M4"), 811 KEEMBAY_MUX(0x5, "LCD_M5"), 812 KEEMBAY_MUX(0x6, "UART2_M6"), 813 KEEMBAY_MUX(0x7, "GPIO_M7")), 814 KEEMBAY_PIN_DESC(75, "GPIO75", 815 KEEMBAY_MUX(0x0, "I3C0_M0"), 816 KEEMBAY_MUX(0x1, "ETH_M1"), 817 KEEMBAY_MUX(0x2, "SLVDS1_M2"), 818 KEEMBAY_MUX(0x3, "TPIU_M3"), 819 KEEMBAY_MUX(0x4, "SD0_M4"), 820 KEEMBAY_MUX(0x5, "LCD_M5"), 821 KEEMBAY_MUX(0x6, "UART2_M6"), 822 KEEMBAY_MUX(0x7, "GPIO_M7")), 823 KEEMBAY_PIN_DESC(76, "GPIO76", 824 KEEMBAY_MUX(0x0, "I2C2_M0"), 825 KEEMBAY_MUX(0x1, "I3C0_M1"), 826 KEEMBAY_MUX(0x2, "SLVDS1_M2"), 827 KEEMBAY_MUX(0x3, "TPIU_M3"), 828 KEEMBAY_MUX(0x4, "ETH_M4"), 829 KEEMBAY_MUX(0x5, "LCD_M5"), 830 KEEMBAY_MUX(0x6, "UART3_M6"), 831 KEEMBAY_MUX(0x7, "GPIO_M7")), 832 KEEMBAY_PIN_DESC(77, "GPIO77", 833 KEEMBAY_MUX(0x0, "PCIE_M0"), 834 KEEMBAY_MUX(0x1, "I3C1_M1"), 835 KEEMBAY_MUX(0x2, "SLVDS1_M2"), 836 KEEMBAY_MUX(0x3, "TPIU_M3"), 837 KEEMBAY_MUX(0x4, "I3C2_M4"), 838 KEEMBAY_MUX(0x5, "LCD_M5"), 839 KEEMBAY_MUX(0x6, "UART3_M6"), 840 KEEMBAY_MUX(0x7, "GPIO_M7")), 841 KEEMBAY_PIN_DESC(78, "GPIO78", 842 KEEMBAY_MUX(0x0, "PCIE_M0"), 843 KEEMBAY_MUX(0x1, "I3C2_M1"), 844 KEEMBAY_MUX(0x2, "SLVDS1_M2"), 845 KEEMBAY_MUX(0x3, "TPIU_M3"), 846 KEEMBAY_MUX(0x4, "I3C2_M4"), 847 KEEMBAY_MUX(0x5, "LCD_M5"), 848 KEEMBAY_MUX(0x6, "UART3_M6"), 849 KEEMBAY_MUX(0x7, "GPIO_M7")), 850 KEEMBAY_PIN_DESC(79, "GPIO79", 851 KEEMBAY_MUX(0x0, "PCIE_M0"), 852 KEEMBAY_MUX(0x1, "I2C2_M1"), 853 KEEMBAY_MUX(0x2, "SLVDS1_M2"), 854 KEEMBAY_MUX(0x3, "TPIU_M3"), 855 KEEMBAY_MUX(0x4, "I3C2_M4"), 856 KEEMBAY_MUX(0x5, "LCD_M5"), 857 KEEMBAY_MUX(0x6, "UART3_M6"), 858 KEEMBAY_MUX(0x7, "GPIO_M7")), 859 }; 860 861 static inline u32 keembay_read_reg(void __iomem *base, unsigned int pin) 862 { 863 return readl(base + KEEMBAY_GPIO_REG_OFFSET(pin)); 864 } 865 866 static inline u32 keembay_read_gpio_reg(void __iomem *base, unsigned int pin) 867 { 868 return keembay_read_reg(base, pin / KEEMBAY_GPIO_MAX_PER_REG); 869 } 870 871 static inline u32 keembay_read_pin(void __iomem *base, unsigned int pin) 872 { 873 u32 val = keembay_read_gpio_reg(base, pin); 874 875 return !!(val & BIT(pin % KEEMBAY_GPIO_MAX_PER_REG)); 876 } 877 878 static inline void keembay_write_reg(u32 val, void __iomem *base, unsigned int pin) 879 { 880 writel(val, base + KEEMBAY_GPIO_REG_OFFSET(pin)); 881 } 882 883 static inline void keembay_write_gpio_reg(u32 val, void __iomem *base, unsigned int pin) 884 { 885 keembay_write_reg(val, base, pin / KEEMBAY_GPIO_MAX_PER_REG); 886 } 887 888 static void keembay_gpio_invert(struct keembay_pinctrl *kpc, unsigned int pin) 889 { 890 unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 891 892 /* 893 * This IP doesn't support the falling edge and low level interrupt 894 * trigger. Invert API is used to mimic the falling edge and low 895 * level support 896 */ 897 898 val |= FIELD_PREP(KEEMBAY_GPIO_MODE_INV_MASK, KEEMBAY_GPIO_MODE_INV_VAL); 899 keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); 900 } 901 902 static void keembay_gpio_restore_default(struct keembay_pinctrl *kpc, unsigned int pin) 903 { 904 unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 905 906 val &= FIELD_PREP(KEEMBAY_GPIO_MODE_INV_MASK, 0); 907 keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); 908 } 909 910 static int keembay_request_gpio(struct pinctrl_dev *pctldev, 911 struct pinctrl_gpio_range *range, unsigned int pin) 912 { 913 struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev); 914 unsigned int val; 915 916 if (pin >= kpc->npins) 917 return -EINVAL; 918 919 val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 920 val = FIELD_GET(KEEMBAY_GPIO_MODE_SELECT_MASK, val); 921 922 /* As per Pin Mux Map, Modes 0 to 6 are for peripherals */ 923 if (val != KEEMBAY_GPIO_MODE_DEFAULT) 924 return -EBUSY; 925 926 return 0; 927 } 928 929 static int keembay_set_mux(struct pinctrl_dev *pctldev, unsigned int fun_sel, 930 unsigned int grp_sel) 931 { 932 struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev); 933 struct function_desc *func; 934 struct group_desc *grp; 935 unsigned int val; 936 u8 pin_mode; 937 int pin; 938 939 grp = pinctrl_generic_get_group(pctldev, grp_sel); 940 if (!grp) 941 return -EINVAL; 942 943 func = pinmux_generic_get_function(pctldev, fun_sel); 944 if (!func) 945 return -EINVAL; 946 947 /* Change modes for pins in the selected group */ 948 pin = *grp->pins; 949 pin_mode = *(u8 *)(func->data); 950 951 val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 952 val = u32_replace_bits(val, pin_mode, KEEMBAY_GPIO_MODE_SELECT_MASK); 953 keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); 954 955 return 0; 956 } 957 958 static u32 keembay_pinconf_get_pull(struct keembay_pinctrl *kpc, unsigned int pin) 959 { 960 unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 961 962 return FIELD_GET(KEEMBAY_GPIO_MODE_PULLUP_MASK, val); 963 } 964 965 static int keembay_pinconf_set_pull(struct keembay_pinctrl *kpc, unsigned int pin, 966 unsigned int pull) 967 { 968 unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 969 970 val = u32_replace_bits(val, pull, KEEMBAY_GPIO_MODE_PULLUP_MASK); 971 keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); 972 973 return 0; 974 } 975 976 static int keembay_pinconf_get_drive(struct keembay_pinctrl *kpc, unsigned int pin) 977 { 978 unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 979 980 val = FIELD_GET(KEEMBAY_GPIO_MODE_DRIVE_MASK, val) * 4; 981 if (val) 982 return val; 983 984 return KEEMBAY_GPIO_MIN_STRENGTH; 985 } 986 987 static int keembay_pinconf_set_drive(struct keembay_pinctrl *kpc, unsigned int pin, 988 unsigned int drive) 989 { 990 unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 991 unsigned int strength = clamp_val(drive, KEEMBAY_GPIO_MIN_STRENGTH, 992 KEEMBAY_GPIO_MAX_STRENGTH) / 4; 993 994 val = u32_replace_bits(val, strength, KEEMBAY_GPIO_MODE_DRIVE_MASK); 995 keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); 996 997 return 0; 998 } 999 1000 static int keembay_pinconf_get_slew_rate(struct keembay_pinctrl *kpc, unsigned int pin) 1001 { 1002 unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 1003 1004 return !!(val & KEEMBAY_GPIO_MODE_SLEW_RATE); 1005 } 1006 1007 static int keembay_pinconf_set_slew_rate(struct keembay_pinctrl *kpc, unsigned int pin, 1008 unsigned int slew_rate) 1009 { 1010 unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 1011 1012 if (slew_rate) 1013 val |= KEEMBAY_GPIO_MODE_SLEW_RATE; 1014 else 1015 val &= ~KEEMBAY_GPIO_MODE_SLEW_RATE; 1016 1017 keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); 1018 1019 return 0; 1020 } 1021 1022 static int keembay_pinconf_get_schmitt(struct keembay_pinctrl *kpc, unsigned int pin) 1023 { 1024 unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 1025 1026 return !!(val & KEEMBAY_GPIO_MODE_SCHMITT_EN); 1027 } 1028 1029 static int keembay_pinconf_set_schmitt(struct keembay_pinctrl *kpc, unsigned int pin, 1030 unsigned int schmitt_en) 1031 { 1032 unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 1033 1034 if (schmitt_en) 1035 val |= KEEMBAY_GPIO_MODE_SCHMITT_EN; 1036 else 1037 val &= ~KEEMBAY_GPIO_MODE_SCHMITT_EN; 1038 1039 keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); 1040 1041 return 0; 1042 } 1043 1044 static int keembay_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, 1045 unsigned long *cfg) 1046 { 1047 struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev); 1048 unsigned int param = pinconf_to_config_param(*cfg); 1049 unsigned int val; 1050 1051 if (pin >= kpc->npins) 1052 return -EINVAL; 1053 1054 switch (param) { 1055 case PIN_CONFIG_BIAS_DISABLE: 1056 if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_DISABLE) 1057 return -EINVAL; 1058 break; 1059 1060 case PIN_CONFIG_BIAS_PULL_UP: 1061 if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_PULL_UP) 1062 return -EINVAL; 1063 break; 1064 1065 case PIN_CONFIG_BIAS_PULL_DOWN: 1066 if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_PULL_DOWN) 1067 return -EINVAL; 1068 break; 1069 1070 case PIN_CONFIG_BIAS_BUS_HOLD: 1071 if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_BUS_HOLD) 1072 return -EINVAL; 1073 break; 1074 1075 case PIN_CONFIG_INPUT_SCHMITT_ENABLE: 1076 if (!keembay_pinconf_get_schmitt(kpc, pin)) 1077 return -EINVAL; 1078 break; 1079 1080 case PIN_CONFIG_SLEW_RATE: 1081 val = keembay_pinconf_get_slew_rate(kpc, pin); 1082 *cfg = pinconf_to_config_packed(param, val); 1083 break; 1084 1085 case PIN_CONFIG_DRIVE_STRENGTH: 1086 val = keembay_pinconf_get_drive(kpc, pin); 1087 *cfg = pinconf_to_config_packed(param, val); 1088 break; 1089 1090 default: 1091 return -ENOTSUPP; 1092 } 1093 1094 return 0; 1095 } 1096 1097 static int keembay_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, 1098 unsigned long *cfg, unsigned int num_configs) 1099 { 1100 struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev); 1101 enum pin_config_param param; 1102 unsigned int arg, i; 1103 int ret = 0; 1104 1105 if (pin >= kpc->npins) 1106 return -EINVAL; 1107 1108 for (i = 0; i < num_configs; i++) { 1109 param = pinconf_to_config_param(cfg[i]); 1110 arg = pinconf_to_config_argument(cfg[i]); 1111 1112 switch (param) { 1113 case PIN_CONFIG_BIAS_DISABLE: 1114 ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_DISABLE); 1115 break; 1116 1117 case PIN_CONFIG_BIAS_PULL_UP: 1118 ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_PULL_UP); 1119 break; 1120 1121 case PIN_CONFIG_BIAS_PULL_DOWN: 1122 ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_PULL_DOWN); 1123 break; 1124 1125 case PIN_CONFIG_BIAS_BUS_HOLD: 1126 ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_BUS_HOLD); 1127 break; 1128 1129 case PIN_CONFIG_INPUT_SCHMITT_ENABLE: 1130 ret = keembay_pinconf_set_schmitt(kpc, pin, arg); 1131 break; 1132 1133 case PIN_CONFIG_SLEW_RATE: 1134 ret = keembay_pinconf_set_slew_rate(kpc, pin, arg); 1135 break; 1136 1137 case PIN_CONFIG_DRIVE_STRENGTH: 1138 ret = keembay_pinconf_set_drive(kpc, pin, arg); 1139 break; 1140 1141 default: 1142 return -ENOTSUPP; 1143 } 1144 if (ret) 1145 return ret; 1146 } 1147 return ret; 1148 } 1149 1150 static const struct pinctrl_ops keembay_pctlops = { 1151 .get_groups_count = pinctrl_generic_get_group_count, 1152 .get_group_name = pinctrl_generic_get_group_name, 1153 .get_group_pins = pinctrl_generic_get_group_pins, 1154 .dt_node_to_map = pinconf_generic_dt_node_to_map_all, 1155 .dt_free_map = pinconf_generic_dt_free_map, 1156 }; 1157 1158 static const struct pinmux_ops keembay_pmxops = { 1159 .get_functions_count = pinmux_generic_get_function_count, 1160 .get_function_name = pinmux_generic_get_function_name, 1161 .get_function_groups = pinmux_generic_get_function_groups, 1162 .gpio_request_enable = keembay_request_gpio, 1163 .set_mux = keembay_set_mux, 1164 }; 1165 1166 static const struct pinconf_ops keembay_confops = { 1167 .is_generic = true, 1168 .pin_config_get = keembay_pinconf_get, 1169 .pin_config_set = keembay_pinconf_set, 1170 }; 1171 1172 static struct pinctrl_desc keembay_pinctrl_desc = { 1173 .name = "keembay-pinmux", 1174 .pctlops = &keembay_pctlops, 1175 .pmxops = &keembay_pmxops, 1176 .confops = &keembay_confops, 1177 .owner = THIS_MODULE, 1178 }; 1179 1180 static int keembay_gpio_get(struct gpio_chip *gc, unsigned int pin) 1181 { 1182 struct keembay_pinctrl *kpc = gpiochip_get_data(gc); 1183 unsigned int val, offset; 1184 1185 val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 1186 offset = (val & KEEMBAY_GPIO_MODE_DIR) ? KEEMBAY_GPIO_DATA_IN : KEEMBAY_GPIO_DATA_OUT; 1187 1188 return keembay_read_pin(kpc->base0 + offset, pin); 1189 } 1190 1191 static void keembay_gpio_set(struct gpio_chip *gc, unsigned int pin, int val) 1192 { 1193 struct keembay_pinctrl *kpc = gpiochip_get_data(gc); 1194 unsigned int reg_val; 1195 1196 reg_val = keembay_read_gpio_reg(kpc->base0 + KEEMBAY_GPIO_DATA_OUT, pin); 1197 if (val) 1198 keembay_write_gpio_reg(reg_val | BIT(pin % KEEMBAY_GPIO_MAX_PER_REG), 1199 kpc->base0 + KEEMBAY_GPIO_DATA_HIGH, pin); 1200 else 1201 keembay_write_gpio_reg(~reg_val | BIT(pin % KEEMBAY_GPIO_MAX_PER_REG), 1202 kpc->base0 + KEEMBAY_GPIO_DATA_LOW, pin); 1203 } 1204 1205 static int keembay_gpio_get_direction(struct gpio_chip *gc, unsigned int pin) 1206 { 1207 struct keembay_pinctrl *kpc = gpiochip_get_data(gc); 1208 unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 1209 1210 return !!(val & KEEMBAY_GPIO_MODE_DIR); 1211 } 1212 1213 static int keembay_gpio_set_direction_in(struct gpio_chip *gc, unsigned int pin) 1214 { 1215 struct keembay_pinctrl *kpc = gpiochip_get_data(gc); 1216 unsigned int val; 1217 1218 val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 1219 val |= KEEMBAY_GPIO_MODE_DIR; 1220 keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); 1221 1222 return 0; 1223 } 1224 1225 static int keembay_gpio_set_direction_out(struct gpio_chip *gc, 1226 unsigned int pin, int value) 1227 { 1228 struct keembay_pinctrl *kpc = gpiochip_get_data(gc); 1229 unsigned int val; 1230 1231 val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); 1232 val &= ~KEEMBAY_GPIO_MODE_DIR; 1233 keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); 1234 keembay_gpio_set(gc, pin, value); 1235 1236 return 0; 1237 } 1238 1239 static void keembay_gpio_irq_handler(struct irq_desc *desc) 1240 { 1241 struct gpio_chip *gc = irq_desc_get_handler_data(desc); 1242 unsigned int kmb_irq = irq_desc_get_irq(desc); 1243 unsigned long reg, clump = 0, bit = 0; 1244 struct irq_chip *parent_chip; 1245 struct keembay_pinctrl *kpc; 1246 unsigned int src, pin, val; 1247 1248 /* Identify GPIO interrupt number from GIC interrupt number */ 1249 for (src = 0; src < KEEMBAY_GPIO_NUM_IRQ; src++) { 1250 if (kmb_irq == gc->irq.parents[src]) 1251 break; 1252 } 1253 1254 if (src == KEEMBAY_GPIO_NUM_IRQ) 1255 return; 1256 1257 parent_chip = irq_desc_get_chip(desc); 1258 kpc = gpiochip_get_data(gc); 1259 1260 chained_irq_enter(parent_chip, desc); 1261 reg = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); 1262 1263 /* 1264 * Each Interrupt line can be shared by up to 4 GPIO pins. Enable bit 1265 * and input values were checked to identify the source of the 1266 * Interrupt. The checked enable bit positions are 7, 15, 23 and 31. 1267 */ 1268 for_each_set_clump8(bit, clump, ®, BITS_PER_TYPE(typeof(reg))) { 1269 pin = clump & ~KEEMBAY_GPIO_IRQ_ENABLE; 1270 val = keembay_read_pin(kpc->base0 + KEEMBAY_GPIO_DATA_IN, pin); 1271 kmb_irq = irq_linear_revmap(gc->irq.domain, pin); 1272 1273 /* Checks if the interrupt is enabled */ 1274 if (val && (clump & KEEMBAY_GPIO_IRQ_ENABLE)) 1275 generic_handle_irq(kmb_irq); 1276 } 1277 chained_irq_exit(parent_chip, desc); 1278 } 1279 1280 static void keembay_gpio_clear_irq(struct irq_data *data, unsigned long pos, 1281 u32 src, irq_hw_number_t pin) 1282 { 1283 struct gpio_chip *gc = irq_data_get_irq_chip_data(data); 1284 struct keembay_pinctrl *kpc = gpiochip_get_data(gc); 1285 unsigned long trig = irqd_get_trigger_type(data); 1286 struct keembay_gpio_irq *irq = &kpc->irq[src]; 1287 unsigned long val; 1288 1289 /* Check if the value of pos/KEEMBAY_GPIO_NUM_IRQ is in valid range. */ 1290 if ((pos / KEEMBAY_GPIO_NUM_IRQ) >= KEEMBAY_GPIO_MAX_PER_IRQ) 1291 return; 1292 1293 /* Retains val register as it handles other interrupts as well. */ 1294 val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); 1295 1296 bitmap_set_value8(&val, 0, pos); 1297 keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); 1298 1299 irq->num_share--; 1300 irq->pins[pos / KEEMBAY_GPIO_NUM_IRQ] = 0; 1301 1302 if (trig & IRQ_TYPE_LEVEL_MASK) 1303 keembay_gpio_restore_default(kpc, pin); 1304 1305 if (irq->trigger == IRQ_TYPE_LEVEL_HIGH) 1306 kpc->max_gpios_level_type++; 1307 else if (irq->trigger == IRQ_TYPE_EDGE_RISING) 1308 kpc->max_gpios_edge_type++; 1309 } 1310 1311 static int keembay_find_free_slot(struct keembay_pinctrl *kpc, unsigned int src) 1312 { 1313 unsigned long val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); 1314 1315 return bitmap_find_free_region(&val, KEEMBAY_GPIO_MAX_PER_REG, 3) / KEEMBAY_GPIO_NUM_IRQ; 1316 } 1317 1318 static int keembay_find_free_src(struct keembay_pinctrl *kpc, unsigned int trig) 1319 { 1320 int src, type = 0; 1321 1322 if (trig & IRQ_TYPE_LEVEL_MASK) 1323 type = IRQ_TYPE_LEVEL_HIGH; 1324 else if (trig & IRQ_TYPE_EDGE_BOTH) 1325 type = IRQ_TYPE_EDGE_RISING; 1326 1327 for (src = 0; src < KEEMBAY_GPIO_NUM_IRQ; src++) { 1328 if (kpc->irq[src].trigger != type) 1329 continue; 1330 1331 if (!keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src) || 1332 kpc->irq[src].num_share < KEEMBAY_GPIO_MAX_PER_IRQ) 1333 return src; 1334 } 1335 1336 return -EBUSY; 1337 } 1338 1339 static void keembay_gpio_set_irq(struct keembay_pinctrl *kpc, int src, 1340 int slot, irq_hw_number_t pin) 1341 { 1342 unsigned long val = pin | KEEMBAY_GPIO_IRQ_ENABLE; 1343 struct keembay_gpio_irq *irq = &kpc->irq[src]; 1344 unsigned long flags, reg; 1345 1346 raw_spin_lock_irqsave(&kpc->lock, flags); 1347 reg = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); 1348 bitmap_set_value8(®, val, slot * 8); 1349 keembay_write_reg(reg, kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); 1350 raw_spin_unlock_irqrestore(&kpc->lock, flags); 1351 1352 if (irq->trigger == IRQ_TYPE_LEVEL_HIGH) 1353 kpc->max_gpios_level_type--; 1354 else if (irq->trigger == IRQ_TYPE_EDGE_RISING) 1355 kpc->max_gpios_edge_type--; 1356 1357 irq->source = src; 1358 irq->pins[slot] = pin; 1359 irq->num_share++; 1360 } 1361 1362 static void keembay_gpio_irq_enable(struct irq_data *data) 1363 { 1364 struct gpio_chip *gc = irq_data_get_irq_chip_data(data); 1365 struct keembay_pinctrl *kpc = gpiochip_get_data(gc); 1366 unsigned int trig = irqd_get_trigger_type(data); 1367 irq_hw_number_t pin = irqd_to_hwirq(data); 1368 int src, slot; 1369 1370 /* Check which Interrupt source and slot is available */ 1371 src = keembay_find_free_src(kpc, trig); 1372 slot = keembay_find_free_slot(kpc, src); 1373 1374 if (src < 0 || slot < 0) 1375 return; 1376 1377 if (trig & KEEMBAY_GPIO_SENSE_LOW) 1378 keembay_gpio_invert(kpc, pin); 1379 1380 keembay_gpio_set_irq(kpc, src, slot, pin); 1381 } 1382 1383 static void keembay_gpio_irq_ack(struct irq_data *data) 1384 { 1385 /* 1386 * The keembay_gpio_irq_ack function is needed to handle_edge_irq. 1387 * IRQ ack is not possible from the SOC perspective. The IP by itself 1388 * is used for handling interrupts which do not come in short-time and 1389 * not used as protocol or communication interrupts. All the interrupts 1390 * are threaded IRQ interrupts. But this function is expected to be 1391 * present as the gpio IP is registered with irq framework. Otherwise 1392 * handle_edge_irq() fails. 1393 */ 1394 } 1395 1396 static void keembay_gpio_irq_disable(struct irq_data *data) 1397 { 1398 struct gpio_chip *gc = irq_data_get_irq_chip_data(data); 1399 struct keembay_pinctrl *kpc = gpiochip_get_data(gc); 1400 irq_hw_number_t pin = irqd_to_hwirq(data); 1401 unsigned long reg, clump = 0, pos = 0; 1402 unsigned int src; 1403 1404 for (src = 0; src < KEEMBAY_GPIO_NUM_IRQ; src++) { 1405 reg = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); 1406 for_each_set_clump8(pos, clump, ®, BITS_PER_TYPE(typeof(reg))) { 1407 if ((clump & ~KEEMBAY_GPIO_IRQ_ENABLE) == pin) { 1408 keembay_gpio_clear_irq(data, pos, src, pin); 1409 return; 1410 } 1411 } 1412 } 1413 } 1414 1415 static int keembay_gpio_irq_set_type(struct irq_data *data, unsigned int type) 1416 { 1417 struct gpio_chip *gc = irq_data_get_irq_chip_data(data); 1418 struct keembay_pinctrl *kpc = gpiochip_get_data(gc); 1419 1420 /* Change EDGE_BOTH as EDGE_RISING in order to claim the IRQ for power button */ 1421 if (!kpc->max_gpios_edge_type && (type & IRQ_TYPE_EDGE_BOTH)) 1422 type = IRQ_TYPE_EDGE_RISING; 1423 1424 if (!kpc->max_gpios_level_type && (type & IRQ_TYPE_LEVEL_MASK)) 1425 type = IRQ_TYPE_NONE; 1426 1427 if (type & IRQ_TYPE_EDGE_BOTH) 1428 irq_set_handler_locked(data, handle_edge_irq); 1429 else if (type & IRQ_TYPE_LEVEL_MASK) 1430 irq_set_handler_locked(data, handle_level_irq); 1431 else 1432 return -EINVAL; 1433 1434 return 0; 1435 } 1436 1437 static int keembay_gpio_add_pin_ranges(struct gpio_chip *chip) 1438 { 1439 struct keembay_pinctrl *kpc = gpiochip_get_data(chip); 1440 int ret; 1441 1442 ret = gpiochip_add_pin_range(chip, dev_name(kpc->dev), 0, 0, chip->ngpio); 1443 if (ret) 1444 dev_err_probe(kpc->dev, ret, "failed to add GPIO pin range\n"); 1445 return ret; 1446 } 1447 1448 static struct irq_chip keembay_gpio_irqchip = { 1449 .name = "keembay-gpio", 1450 .irq_enable = keembay_gpio_irq_enable, 1451 .irq_disable = keembay_gpio_irq_disable, 1452 .irq_set_type = keembay_gpio_irq_set_type, 1453 .irq_ack = keembay_gpio_irq_ack, 1454 }; 1455 1456 static int keembay_gpiochip_probe(struct keembay_pinctrl *kpc, 1457 struct platform_device *pdev) 1458 { 1459 unsigned int i, level_line = 0, edge_line = 0; 1460 struct gpio_chip *gc = &kpc->chip; 1461 struct gpio_irq_chip *girq; 1462 1463 /* Setup GPIO IRQ chip */ 1464 girq = &kpc->chip.irq; 1465 girq->chip = &keembay_gpio_irqchip; 1466 girq->parent_handler = keembay_gpio_irq_handler; 1467 girq->num_parents = KEEMBAY_GPIO_NUM_IRQ; 1468 girq->parents = devm_kcalloc(kpc->dev, girq->num_parents, 1469 sizeof(*girq->parents), GFP_KERNEL); 1470 1471 if (!girq->parents) 1472 return -ENOMEM; 1473 1474 /* Setup GPIO chip */ 1475 gc->label = dev_name(kpc->dev); 1476 gc->parent = kpc->dev; 1477 gc->request = gpiochip_generic_request; 1478 gc->free = gpiochip_generic_free; 1479 gc->get_direction = keembay_gpio_get_direction; 1480 gc->direction_input = keembay_gpio_set_direction_in; 1481 gc->direction_output = keembay_gpio_set_direction_out; 1482 gc->get = keembay_gpio_get; 1483 gc->set = keembay_gpio_set; 1484 gc->set_config = gpiochip_generic_config; 1485 gc->base = -1; 1486 gc->ngpio = kpc->npins; 1487 gc->add_pin_ranges = keembay_gpio_add_pin_ranges; 1488 1489 for (i = 0; i < KEEMBAY_GPIO_NUM_IRQ; i++) { 1490 struct keembay_gpio_irq *kmb_irq = &kpc->irq[i]; 1491 int irq; 1492 1493 irq = platform_get_irq_optional(pdev, i); 1494 if (irq <= 0) 1495 continue; 1496 1497 girq->parents[i] = irq; 1498 kmb_irq->line = girq->parents[i]; 1499 kmb_irq->source = i; 1500 kmb_irq->trigger = irq_get_trigger_type(girq->parents[i]); 1501 kmb_irq->num_share = 0; 1502 1503 if (kmb_irq->trigger == IRQ_TYPE_LEVEL_HIGH) 1504 level_line++; 1505 else 1506 edge_line++; 1507 } 1508 1509 kpc->max_gpios_level_type = level_line * KEEMBAY_GPIO_MAX_PER_IRQ; 1510 kpc->max_gpios_edge_type = edge_line * KEEMBAY_GPIO_MAX_PER_IRQ; 1511 1512 girq->default_type = IRQ_TYPE_NONE; 1513 girq->handler = handle_bad_irq; 1514 1515 return devm_gpiochip_add_data(kpc->dev, gc, kpc); 1516 } 1517 1518 static int keembay_build_groups(struct keembay_pinctrl *kpc) 1519 { 1520 struct group_desc *grp; 1521 unsigned int i; 1522 1523 kpc->ngroups = kpc->npins; 1524 grp = devm_kcalloc(kpc->dev, kpc->ngroups, sizeof(*grp), GFP_KERNEL); 1525 if (!grp) 1526 return -ENOMEM; 1527 1528 /* Each pin is categorised as one group */ 1529 for (i = 0; i < kpc->ngroups; i++) { 1530 const struct pinctrl_pin_desc *pdesc = keembay_pins + i; 1531 struct group_desc *kmb_grp = grp + i; 1532 1533 kmb_grp->name = pdesc->name; 1534 kmb_grp->pins = (int *)&pdesc->number; 1535 pinctrl_generic_add_group(kpc->pctrl, kmb_grp->name, 1536 kmb_grp->pins, 1, NULL); 1537 } 1538 1539 return 0; 1540 } 1541 1542 static int keembay_pinctrl_reg(struct keembay_pinctrl *kpc, struct device *dev) 1543 { 1544 int ret; 1545 1546 keembay_pinctrl_desc.pins = keembay_pins; 1547 ret = of_property_read_u32(dev->of_node, "ngpios", &kpc->npins); 1548 if (ret < 0) 1549 return ret; 1550 keembay_pinctrl_desc.npins = kpc->npins; 1551 1552 kpc->pctrl = devm_pinctrl_register(kpc->dev, &keembay_pinctrl_desc, kpc); 1553 1554 return PTR_ERR_OR_ZERO(kpc->pctrl); 1555 } 1556 1557 static int keembay_add_functions(struct keembay_pinctrl *kpc, 1558 struct function_desc *function) 1559 { 1560 unsigned int i; 1561 1562 /* Assign the groups for each function */ 1563 for (i = 0; i < kpc->npins; i++) { 1564 const struct pinctrl_pin_desc *pdesc = keembay_pins + i; 1565 struct keembay_mux_desc *mux = pdesc->drv_data; 1566 1567 while (mux->name) { 1568 struct function_desc *func; 1569 const char **grp; 1570 size_t grp_size; 1571 u32 j, grp_num; 1572 1573 for (j = 0; j < kpc->nfuncs; j++) { 1574 if (!strcmp(mux->name, function[j].name)) 1575 break; 1576 } 1577 1578 if (j == kpc->nfuncs) 1579 return -EINVAL; 1580 1581 func = function + j; 1582 grp_num = func->num_group_names; 1583 grp_size = sizeof(*func->group_names); 1584 1585 if (!func->group_names) { 1586 func->group_names = devm_kcalloc(kpc->dev, 1587 grp_num, 1588 grp_size, 1589 GFP_KERNEL); 1590 if (!func->group_names) 1591 return -ENOMEM; 1592 } 1593 1594 grp = func->group_names; 1595 while (*grp) 1596 grp++; 1597 1598 *grp = pdesc->name; 1599 mux++; 1600 } 1601 } 1602 1603 /* Add all functions */ 1604 for (i = 0; i < kpc->nfuncs; i++) { 1605 pinmux_generic_add_function(kpc->pctrl, 1606 function[i].name, 1607 function[i].group_names, 1608 function[i].num_group_names, 1609 function[i].data); 1610 } 1611 1612 return 0; 1613 } 1614 1615 static int keembay_build_functions(struct keembay_pinctrl *kpc) 1616 { 1617 struct function_desc *keembay_funcs, *new_funcs; 1618 int i; 1619 1620 /* Allocate total number of functions */ 1621 kpc->nfuncs = 0; 1622 keembay_funcs = kcalloc(kpc->npins * 8, sizeof(*keembay_funcs), GFP_KERNEL); 1623 if (!keembay_funcs) 1624 return -ENOMEM; 1625 1626 /* Find total number of functions and each's properties */ 1627 for (i = 0; i < kpc->npins; i++) { 1628 const struct pinctrl_pin_desc *pdesc = keembay_pins + i; 1629 struct keembay_mux_desc *mux = pdesc->drv_data; 1630 1631 while (mux->name) { 1632 struct function_desc *fdesc = keembay_funcs; 1633 1634 while (fdesc->name) { 1635 if (!strcmp(mux->name, fdesc->name)) { 1636 fdesc->num_group_names++; 1637 break; 1638 } 1639 1640 fdesc++; 1641 } 1642 1643 if (!fdesc->name) { 1644 fdesc->name = mux->name; 1645 fdesc->num_group_names = 1; 1646 fdesc->data = &mux->mode; 1647 kpc->nfuncs++; 1648 } 1649 1650 mux++; 1651 } 1652 } 1653 1654 /* Reallocate memory based on actual number of functions */ 1655 new_funcs = krealloc(keembay_funcs, kpc->nfuncs * sizeof(*new_funcs), GFP_KERNEL); 1656 if (!new_funcs) { 1657 kfree(keembay_funcs); 1658 return -ENOMEM; 1659 } 1660 1661 return keembay_add_functions(kpc, new_funcs); 1662 } 1663 1664 static const struct keembay_pin_soc keembay_data = { 1665 .pins = keembay_pins, 1666 }; 1667 1668 static const struct of_device_id keembay_pinctrl_match[] = { 1669 { .compatible = "intel,keembay-pinctrl", .data = &keembay_data }, 1670 { } 1671 }; 1672 MODULE_DEVICE_TABLE(of, keembay_pinctrl_match); 1673 1674 static int keembay_pinctrl_probe(struct platform_device *pdev) 1675 { 1676 struct device *dev = &pdev->dev; 1677 struct keembay_pinctrl *kpc; 1678 int ret; 1679 1680 kpc = devm_kzalloc(dev, sizeof(*kpc), GFP_KERNEL); 1681 if (!kpc) 1682 return -ENOMEM; 1683 1684 kpc->dev = dev; 1685 kpc->soc = device_get_match_data(dev); 1686 1687 kpc->base0 = devm_platform_ioremap_resource(pdev, 0); 1688 if (IS_ERR(kpc->base0)) 1689 return PTR_ERR(kpc->base0); 1690 1691 kpc->base1 = devm_platform_ioremap_resource(pdev, 1); 1692 if (IS_ERR(kpc->base1)) 1693 return PTR_ERR(kpc->base1); 1694 1695 raw_spin_lock_init(&kpc->lock); 1696 1697 ret = keembay_pinctrl_reg(kpc, dev); 1698 if (ret) 1699 return ret; 1700 1701 ret = keembay_build_groups(kpc); 1702 if (ret) 1703 return ret; 1704 1705 ret = keembay_build_functions(kpc); 1706 if (ret) 1707 return ret; 1708 1709 ret = keembay_gpiochip_probe(kpc, pdev); 1710 if (ret) 1711 return ret; 1712 1713 platform_set_drvdata(pdev, kpc); 1714 1715 return 0; 1716 } 1717 1718 static struct platform_driver keembay_pinctrl_driver = { 1719 .probe = keembay_pinctrl_probe, 1720 .driver = { 1721 .name = "keembay-pinctrl", 1722 .of_match_table = keembay_pinctrl_match, 1723 }, 1724 }; 1725 module_platform_driver(keembay_pinctrl_driver); 1726 1727 MODULE_AUTHOR("Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>"); 1728 MODULE_AUTHOR("Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>"); 1729 MODULE_AUTHOR("Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>"); 1730 MODULE_DESCRIPTION("Intel Keem Bay SoC pinctrl/GPIO driver"); 1731 MODULE_LICENSE("GPL"); 1732