xref: /linux/drivers/pinctrl/meson/pinctrl-meson.h (revision e5c86679d5e864947a52fb31e45a425dea3e7fa9)
1 /*
2  * Pin controller and GPIO driver for Amlogic Meson SoCs
3  *
4  * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * version 2 as published by the Free Software Foundation.
9  *
10  * You should have received a copy of the GNU General Public License
11  * along with this program. If not, see <http://www.gnu.org/licenses/>.
12  */
13 
14 #include <linux/gpio.h>
15 #include <linux/pinctrl/pinctrl.h>
16 #include <linux/regmap.h>
17 #include <linux/types.h>
18 
19 /**
20  * struct meson_pmx_group - a pinmux group
21  *
22  * @name:	group name
23  * @pins:	pins in the group
24  * @num_pins:	number of pins in the group
25  * @is_gpio:	whether the group is a single GPIO group
26  * @reg:	register offset for the group in the domain mux registers
27  * @bit		bit index enabling the group
28  * @domain:	index of the domain this group belongs to
29  */
30 struct meson_pmx_group {
31 	const char *name;
32 	const unsigned int *pins;
33 	unsigned int num_pins;
34 	bool is_gpio;
35 	unsigned int reg;
36 	unsigned int bit;
37 };
38 
39 /**
40  * struct meson_pmx_func - a pinmux function
41  *
42  * @name:	function name
43  * @groups:	groups in the function
44  * @num_groups:	number of groups in the function
45  */
46 struct meson_pmx_func {
47 	const char *name;
48 	const char * const *groups;
49 	unsigned int num_groups;
50 };
51 
52 /**
53  * struct meson_reg_desc - a register descriptor
54  *
55  * @reg:	register offset in the regmap
56  * @bit:	bit index in register
57  *
58  * The structure describes the information needed to control pull,
59  * pull-enable, direction, etc. for a single pin
60  */
61 struct meson_reg_desc {
62 	unsigned int reg;
63 	unsigned int bit;
64 };
65 
66 /**
67  * enum meson_reg_type - type of registers encoded in @meson_reg_desc
68  */
69 enum meson_reg_type {
70 	REG_PULLEN,
71 	REG_PULL,
72 	REG_DIR,
73 	REG_OUT,
74 	REG_IN,
75 	NUM_REG,
76 };
77 
78 /**
79  * struct meson bank
80  *
81  * @name:	bank name
82  * @first:	first pin of the bank
83  * @last:	last pin of the bank
84  * @regs:	array of register descriptors
85  *
86  * A bank represents a set of pins controlled by a contiguous set of
87  * bits in the domain registers. The structure specifies which bits in
88  * the regmap control the different functionalities. Each member of
89  * the @regs array refers to the first pin of the bank.
90  */
91 struct meson_bank {
92 	const char *name;
93 	unsigned int first;
94 	unsigned int last;
95 	struct meson_reg_desc regs[NUM_REG];
96 };
97 
98 struct meson_pinctrl_data {
99 	const char *name;
100 	const struct pinctrl_pin_desc *pins;
101 	struct meson_pmx_group *groups;
102 	struct meson_pmx_func *funcs;
103 	unsigned int pin_base;
104 	unsigned int num_pins;
105 	unsigned int num_groups;
106 	unsigned int num_funcs;
107 	struct meson_bank *banks;
108 	unsigned int num_banks;
109 };
110 
111 struct meson_pinctrl {
112 	struct device *dev;
113 	struct pinctrl_dev *pcdev;
114 	struct pinctrl_desc desc;
115 	struct meson_pinctrl_data *data;
116 	struct regmap *reg_mux;
117 	struct regmap *reg_pullen;
118 	struct regmap *reg_pull;
119 	struct regmap *reg_gpio;
120 	struct gpio_chip chip;
121 	struct device_node *of_node;
122 };
123 
124 #define PIN(x, b)	(b + x)
125 
126 #define GROUP(grp, r, b)						\
127 	{								\
128 		.name = #grp,						\
129 		.pins = grp ## _pins,					\
130 		.num_pins = ARRAY_SIZE(grp ## _pins),			\
131 		.reg = r,						\
132 		.bit = b,						\
133 	 }
134 
135 #define GPIO_GROUP(gpio, b)						\
136 	{								\
137 		.name = #gpio,						\
138 		.pins = (const unsigned int[]){ PIN(gpio, b) },		\
139 		.num_pins = 1,						\
140 		.is_gpio = true,					\
141 	 }
142 
143 #define FUNCTION(fn)							\
144 	{								\
145 		.name = #fn,						\
146 		.groups = fn ## _groups,				\
147 		.num_groups = ARRAY_SIZE(fn ## _groups),		\
148 	}
149 
150 #define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib)		\
151 	{								\
152 		.name	= n,						\
153 		.first	= f,						\
154 		.last	= l,						\
155 		.regs	= {						\
156 			[REG_PULLEN]	= { per, peb },			\
157 			[REG_PULL]	= { pr, pb },			\
158 			[REG_DIR]	= { dr, db },			\
159 			[REG_OUT]	= { or, ob },			\
160 			[REG_IN]	= { ir, ib },			\
161 		},							\
162 	 }
163 
164 #define MESON_PIN(x, b) PINCTRL_PIN(PIN(x, b), #x)
165 
166 extern struct meson_pinctrl_data meson8_cbus_pinctrl_data;
167 extern struct meson_pinctrl_data meson8_aobus_pinctrl_data;
168 extern struct meson_pinctrl_data meson8b_cbus_pinctrl_data;
169 extern struct meson_pinctrl_data meson8b_aobus_pinctrl_data;
170 extern struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data;
171 extern struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data;
172 extern struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data;
173 extern struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data;
174