xref: /linux/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c (revision 23c48a124b469cee2eb0c75e6d22d366d1caa118)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2014-2017 Broadcom
4  */
5 
6 /*
7  * This file contains the Broadcom Iproc GPIO driver that supports 3
8  * GPIO controllers on Iproc including the ASIU GPIO controller, the
9  * chipCommonG GPIO controller, and the always-on GPIO controller. Basic
10  * PINCONF such as bias pull up/down, and drive strength are also supported
11  * in this driver.
12  *
13  * It provides the functionality where pins from the GPIO can be
14  * individually muxed to GPIO function, if individual pad
15  * configuration is supported, through the interaction with respective
16  * SoCs IOMUX controller.
17  */
18 
19 #include <linux/kernel.h>
20 #include <linux/slab.h>
21 #include <linux/interrupt.h>
22 #include <linux/io.h>
23 #include <linux/gpio/driver.h>
24 #include <linux/ioport.h>
25 #include <linux/of_device.h>
26 #include <linux/of_irq.h>
27 #include <linux/pinctrl/pinctrl.h>
28 #include <linux/pinctrl/pinconf.h>
29 #include <linux/pinctrl/pinconf-generic.h>
30 
31 #include "../pinctrl-utils.h"
32 
33 #define IPROC_GPIO_DATA_IN_OFFSET   0x00
34 #define IPROC_GPIO_DATA_OUT_OFFSET  0x04
35 #define IPROC_GPIO_OUT_EN_OFFSET    0x08
36 #define IPROC_GPIO_INT_TYPE_OFFSET  0x0c
37 #define IPROC_GPIO_INT_DE_OFFSET    0x10
38 #define IPROC_GPIO_INT_EDGE_OFFSET  0x14
39 #define IPROC_GPIO_INT_MSK_OFFSET   0x18
40 #define IPROC_GPIO_INT_STAT_OFFSET  0x1c
41 #define IPROC_GPIO_INT_MSTAT_OFFSET 0x20
42 #define IPROC_GPIO_INT_CLR_OFFSET   0x24
43 #define IPROC_GPIO_PAD_RES_OFFSET   0x34
44 #define IPROC_GPIO_RES_EN_OFFSET    0x38
45 
46 /* drive strength control for ASIU GPIO */
47 #define IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET 0x58
48 
49 /* pinconf for CCM GPIO */
50 #define IPROC_GPIO_PULL_DN_OFFSET   0x10
51 #define IPROC_GPIO_PULL_UP_OFFSET   0x14
52 
53 /* pinconf for CRMU(aon) GPIO and CCM GPIO*/
54 #define IPROC_GPIO_DRV_CTRL_OFFSET  0x00
55 
56 #define GPIO_BANK_SIZE 0x200
57 #define NGPIOS_PER_BANK 32
58 #define GPIO_BANK(pin) ((pin) / NGPIOS_PER_BANK)
59 
60 #define IPROC_GPIO_REG(pin, reg) (GPIO_BANK(pin) * GPIO_BANK_SIZE + (reg))
61 #define IPROC_GPIO_SHIFT(pin) ((pin) % NGPIOS_PER_BANK)
62 
63 #define GPIO_DRV_STRENGTH_BIT_SHIFT  20
64 #define GPIO_DRV_STRENGTH_BITS       3
65 #define GPIO_DRV_STRENGTH_BIT_MASK   ((1 << GPIO_DRV_STRENGTH_BITS) - 1)
66 
67 enum iproc_pinconf_param {
68 	IPROC_PINCONF_DRIVE_STRENGTH = 0,
69 	IPROC_PINCONF_BIAS_DISABLE,
70 	IPROC_PINCONF_BIAS_PULL_UP,
71 	IPROC_PINCONF_BIAS_PULL_DOWN,
72 	IPROC_PINCON_MAX,
73 };
74 
75 enum iproc_pinconf_ctrl_type {
76 	IOCTRL_TYPE_AON = 1,
77 	IOCTRL_TYPE_CDRU,
78 	IOCTRL_TYPE_INVALID,
79 };
80 
81 /*
82  * Iproc GPIO core
83  *
84  * @dev: pointer to device
85  * @base: I/O register base for Iproc GPIO controller
86  * @io_ctrl: I/O register base for certain type of Iproc GPIO controller that
87  * has the PINCONF support implemented outside of the GPIO block
88  * @lock: lock to protect access to I/O registers
89  * @gc: GPIO chip
90  * @num_banks: number of GPIO banks, each bank supports up to 32 GPIOs
91  * @pinmux_is_supported: flag to indicate this GPIO controller contains pins
92  * that can be individually muxed to GPIO
93  * @pinconf_disable: contains a list of PINCONF parameters that need to be
94  * disabled
95  * @nr_pinconf_disable: total number of PINCONF parameters that need to be
96  * disabled
97  * @pctl: pointer to pinctrl_dev
98  * @pctldesc: pinctrl descriptor
99  */
100 struct iproc_gpio {
101 	struct device *dev;
102 
103 	void __iomem *base;
104 	void __iomem *io_ctrl;
105 	enum iproc_pinconf_ctrl_type io_ctrl_type;
106 
107 	raw_spinlock_t lock;
108 
109 	struct irq_chip irqchip;
110 	struct gpio_chip gc;
111 	unsigned num_banks;
112 
113 	bool pinmux_is_supported;
114 
115 	enum pin_config_param *pinconf_disable;
116 	unsigned int nr_pinconf_disable;
117 
118 	struct pinctrl_dev *pctl;
119 	struct pinctrl_desc pctldesc;
120 };
121 
122 /*
123  * Mapping from PINCONF pins to GPIO pins is 1-to-1
124  */
125 static inline unsigned iproc_pin_to_gpio(unsigned pin)
126 {
127 	return pin;
128 }
129 
130 /**
131  *  iproc_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
132  *  Iproc GPIO register
133  *
134  *  @chip: Iproc GPIO device
135  *  @reg: register offset
136  *  @gpio: GPIO pin
137  *  @set: set or clear
138  */
139 static inline void iproc_set_bit(struct iproc_gpio *chip, unsigned int reg,
140 				  unsigned gpio, bool set)
141 {
142 	unsigned int offset = IPROC_GPIO_REG(gpio, reg);
143 	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
144 	u32 val;
145 
146 	val = readl(chip->base + offset);
147 	if (set)
148 		val |= BIT(shift);
149 	else
150 		val &= ~BIT(shift);
151 	writel(val, chip->base + offset);
152 }
153 
154 static inline bool iproc_get_bit(struct iproc_gpio *chip, unsigned int reg,
155 				  unsigned gpio)
156 {
157 	unsigned int offset = IPROC_GPIO_REG(gpio, reg);
158 	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
159 
160 	return !!(readl(chip->base + offset) & BIT(shift));
161 }
162 
163 static void iproc_gpio_irq_handler(struct irq_desc *desc)
164 {
165 	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
166 	struct iproc_gpio *chip = gpiochip_get_data(gc);
167 	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
168 	int i, bit;
169 
170 	chained_irq_enter(irq_chip, desc);
171 
172 	/* go through the entire GPIO banks and handle all interrupts */
173 	for (i = 0; i < chip->num_banks; i++) {
174 		unsigned long val = readl(chip->base + (i * GPIO_BANK_SIZE) +
175 					  IPROC_GPIO_INT_MSTAT_OFFSET);
176 
177 		for_each_set_bit(bit, &val, NGPIOS_PER_BANK) {
178 			unsigned pin = NGPIOS_PER_BANK * i + bit;
179 
180 			/*
181 			 * Clear the interrupt before invoking the
182 			 * handler, so we do not leave any window
183 			 */
184 			writel(BIT(bit), chip->base + (i * GPIO_BANK_SIZE) +
185 			       IPROC_GPIO_INT_CLR_OFFSET);
186 
187 			generic_handle_domain_irq(gc->irq.domain, pin);
188 		}
189 	}
190 
191 	chained_irq_exit(irq_chip, desc);
192 }
193 
194 
195 static void iproc_gpio_irq_ack(struct irq_data *d)
196 {
197 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
198 	struct iproc_gpio *chip = gpiochip_get_data(gc);
199 	unsigned gpio = d->hwirq;
200 	unsigned int offset = IPROC_GPIO_REG(gpio,
201 			IPROC_GPIO_INT_CLR_OFFSET);
202 	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
203 	u32 val = BIT(shift);
204 
205 	writel(val, chip->base + offset);
206 }
207 
208 /**
209  *  iproc_gpio_irq_set_mask - mask/unmask a GPIO interrupt
210  *
211  *  @d: IRQ chip data
212  *  @unmask: mask/unmask GPIO interrupt
213  */
214 static void iproc_gpio_irq_set_mask(struct irq_data *d, bool unmask)
215 {
216 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
217 	struct iproc_gpio *chip = gpiochip_get_data(gc);
218 	unsigned gpio = d->hwirq;
219 
220 	iproc_set_bit(chip, IPROC_GPIO_INT_MSK_OFFSET, gpio, unmask);
221 }
222 
223 static void iproc_gpio_irq_mask(struct irq_data *d)
224 {
225 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
226 	struct iproc_gpio *chip = gpiochip_get_data(gc);
227 	unsigned long flags;
228 
229 	raw_spin_lock_irqsave(&chip->lock, flags);
230 	iproc_gpio_irq_set_mask(d, false);
231 	raw_spin_unlock_irqrestore(&chip->lock, flags);
232 }
233 
234 static void iproc_gpio_irq_unmask(struct irq_data *d)
235 {
236 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
237 	struct iproc_gpio *chip = gpiochip_get_data(gc);
238 	unsigned long flags;
239 
240 	raw_spin_lock_irqsave(&chip->lock, flags);
241 	iproc_gpio_irq_set_mask(d, true);
242 	raw_spin_unlock_irqrestore(&chip->lock, flags);
243 }
244 
245 static int iproc_gpio_irq_set_type(struct irq_data *d, unsigned int type)
246 {
247 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
248 	struct iproc_gpio *chip = gpiochip_get_data(gc);
249 	unsigned gpio = d->hwirq;
250 	bool level_triggered = false;
251 	bool dual_edge = false;
252 	bool rising_or_high = false;
253 	unsigned long flags;
254 
255 	switch (type & IRQ_TYPE_SENSE_MASK) {
256 	case IRQ_TYPE_EDGE_RISING:
257 		rising_or_high = true;
258 		break;
259 
260 	case IRQ_TYPE_EDGE_FALLING:
261 		break;
262 
263 	case IRQ_TYPE_EDGE_BOTH:
264 		dual_edge = true;
265 		break;
266 
267 	case IRQ_TYPE_LEVEL_HIGH:
268 		level_triggered = true;
269 		rising_or_high = true;
270 		break;
271 
272 	case IRQ_TYPE_LEVEL_LOW:
273 		level_triggered = true;
274 		break;
275 
276 	default:
277 		dev_err(chip->dev, "invalid GPIO IRQ type 0x%x\n",
278 			type);
279 		return -EINVAL;
280 	}
281 
282 	raw_spin_lock_irqsave(&chip->lock, flags);
283 	iproc_set_bit(chip, IPROC_GPIO_INT_TYPE_OFFSET, gpio,
284 		       level_triggered);
285 	iproc_set_bit(chip, IPROC_GPIO_INT_DE_OFFSET, gpio, dual_edge);
286 	iproc_set_bit(chip, IPROC_GPIO_INT_EDGE_OFFSET, gpio,
287 		       rising_or_high);
288 
289 	if (type & IRQ_TYPE_EDGE_BOTH)
290 		irq_set_handler_locked(d, handle_edge_irq);
291 	else
292 		irq_set_handler_locked(d, handle_level_irq);
293 
294 	raw_spin_unlock_irqrestore(&chip->lock, flags);
295 
296 	dev_dbg(chip->dev,
297 		"gpio:%u level_triggered:%d dual_edge:%d rising_or_high:%d\n",
298 		gpio, level_triggered, dual_edge, rising_or_high);
299 
300 	return 0;
301 }
302 
303 /*
304  * Request the Iproc IOMUX pinmux controller to mux individual pins to GPIO
305  */
306 static int iproc_gpio_request(struct gpio_chip *gc, unsigned offset)
307 {
308 	struct iproc_gpio *chip = gpiochip_get_data(gc);
309 	unsigned gpio = gc->base + offset;
310 
311 	/* not all Iproc GPIO pins can be muxed individually */
312 	if (!chip->pinmux_is_supported)
313 		return 0;
314 
315 	return pinctrl_gpio_request(gpio);
316 }
317 
318 static void iproc_gpio_free(struct gpio_chip *gc, unsigned offset)
319 {
320 	struct iproc_gpio *chip = gpiochip_get_data(gc);
321 	unsigned gpio = gc->base + offset;
322 
323 	if (!chip->pinmux_is_supported)
324 		return;
325 
326 	pinctrl_gpio_free(gpio);
327 }
328 
329 static int iproc_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
330 {
331 	struct iproc_gpio *chip = gpiochip_get_data(gc);
332 	unsigned long flags;
333 
334 	raw_spin_lock_irqsave(&chip->lock, flags);
335 	iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, false);
336 	raw_spin_unlock_irqrestore(&chip->lock, flags);
337 
338 	dev_dbg(chip->dev, "gpio:%u set input\n", gpio);
339 
340 	return 0;
341 }
342 
343 static int iproc_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
344 					int val)
345 {
346 	struct iproc_gpio *chip = gpiochip_get_data(gc);
347 	unsigned long flags;
348 
349 	raw_spin_lock_irqsave(&chip->lock, flags);
350 	iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, true);
351 	iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
352 	raw_spin_unlock_irqrestore(&chip->lock, flags);
353 
354 	dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val);
355 
356 	return 0;
357 }
358 
359 static int iproc_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
360 {
361 	struct iproc_gpio *chip = gpiochip_get_data(gc);
362 	unsigned int offset = IPROC_GPIO_REG(gpio, IPROC_GPIO_OUT_EN_OFFSET);
363 	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
364 
365 	if (readl(chip->base + offset) & BIT(shift))
366 		return GPIO_LINE_DIRECTION_OUT;
367 
368 	return GPIO_LINE_DIRECTION_IN;
369 }
370 
371 static void iproc_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
372 {
373 	struct iproc_gpio *chip = gpiochip_get_data(gc);
374 	unsigned long flags;
375 
376 	raw_spin_lock_irqsave(&chip->lock, flags);
377 	iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
378 	raw_spin_unlock_irqrestore(&chip->lock, flags);
379 
380 	dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val);
381 }
382 
383 static int iproc_gpio_get(struct gpio_chip *gc, unsigned gpio)
384 {
385 	struct iproc_gpio *chip = gpiochip_get_data(gc);
386 	unsigned int offset = IPROC_GPIO_REG(gpio,
387 					      IPROC_GPIO_DATA_IN_OFFSET);
388 	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
389 
390 	return !!(readl(chip->base + offset) & BIT(shift));
391 }
392 
393 /*
394  * Mapping of the iProc PINCONF parameters to the generic pin configuration
395  * parameters
396  */
397 static const enum pin_config_param iproc_pinconf_disable_map[] = {
398 	[IPROC_PINCONF_DRIVE_STRENGTH] = PIN_CONFIG_DRIVE_STRENGTH,
399 	[IPROC_PINCONF_BIAS_DISABLE] = PIN_CONFIG_BIAS_DISABLE,
400 	[IPROC_PINCONF_BIAS_PULL_UP] = PIN_CONFIG_BIAS_PULL_UP,
401 	[IPROC_PINCONF_BIAS_PULL_DOWN] = PIN_CONFIG_BIAS_PULL_DOWN,
402 };
403 
404 static bool iproc_pinconf_param_is_disabled(struct iproc_gpio *chip,
405 					    enum pin_config_param param)
406 {
407 	unsigned int i;
408 
409 	if (!chip->nr_pinconf_disable)
410 		return false;
411 
412 	for (i = 0; i < chip->nr_pinconf_disable; i++)
413 		if (chip->pinconf_disable[i] == param)
414 			return true;
415 
416 	return false;
417 }
418 
419 static int iproc_pinconf_disable_map_create(struct iproc_gpio *chip,
420 					    unsigned long disable_mask)
421 {
422 	unsigned int map_size = ARRAY_SIZE(iproc_pinconf_disable_map);
423 	unsigned int bit, nbits = 0;
424 
425 	/* figure out total number of PINCONF parameters to disable */
426 	for_each_set_bit(bit, &disable_mask, map_size)
427 		nbits++;
428 
429 	if (!nbits)
430 		return 0;
431 
432 	/*
433 	 * Allocate an array to store PINCONF parameters that need to be
434 	 * disabled
435 	 */
436 	chip->pinconf_disable = devm_kcalloc(chip->dev, nbits,
437 					     sizeof(*chip->pinconf_disable),
438 					     GFP_KERNEL);
439 	if (!chip->pinconf_disable)
440 		return -ENOMEM;
441 
442 	chip->nr_pinconf_disable = nbits;
443 
444 	/* now store these parameters */
445 	nbits = 0;
446 	for_each_set_bit(bit, &disable_mask, map_size)
447 		chip->pinconf_disable[nbits++] = iproc_pinconf_disable_map[bit];
448 
449 	return 0;
450 }
451 
452 static int iproc_get_groups_count(struct pinctrl_dev *pctldev)
453 {
454 	return 1;
455 }
456 
457 /*
458  * Only one group: "gpio_grp", since this local pinctrl device only performs
459  * GPIO specific PINCONF configurations
460  */
461 static const char *iproc_get_group_name(struct pinctrl_dev *pctldev,
462 					 unsigned selector)
463 {
464 	return "gpio_grp";
465 }
466 
467 static const struct pinctrl_ops iproc_pctrl_ops = {
468 	.get_groups_count = iproc_get_groups_count,
469 	.get_group_name = iproc_get_group_name,
470 	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
471 	.dt_free_map = pinctrl_utils_free_map,
472 };
473 
474 static int iproc_gpio_set_pull(struct iproc_gpio *chip, unsigned gpio,
475 				bool disable, bool pull_up)
476 {
477 	void __iomem *base;
478 	unsigned long flags;
479 	unsigned int shift;
480 	u32 val_1, val_2;
481 
482 	raw_spin_lock_irqsave(&chip->lock, flags);
483 	if (chip->io_ctrl_type == IOCTRL_TYPE_CDRU) {
484 		base = chip->io_ctrl;
485 		shift = IPROC_GPIO_SHIFT(gpio);
486 
487 		val_1 = readl(base + IPROC_GPIO_PULL_UP_OFFSET);
488 		val_2 = readl(base + IPROC_GPIO_PULL_DN_OFFSET);
489 		if (disable) {
490 			/* no pull-up or pull-down */
491 			val_1 &= ~BIT(shift);
492 			val_2 &= ~BIT(shift);
493 		} else if (pull_up) {
494 			val_1 |= BIT(shift);
495 			val_2 &= ~BIT(shift);
496 		} else {
497 			val_1 &= ~BIT(shift);
498 			val_2 |= BIT(shift);
499 		}
500 		writel(val_1, base + IPROC_GPIO_PULL_UP_OFFSET);
501 		writel(val_2, base + IPROC_GPIO_PULL_DN_OFFSET);
502 	} else {
503 		if (disable) {
504 			iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio,
505 				      false);
506 		} else {
507 			iproc_set_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio,
508 				      pull_up);
509 			iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio,
510 				      true);
511 		}
512 	}
513 
514 	raw_spin_unlock_irqrestore(&chip->lock, flags);
515 	dev_dbg(chip->dev, "gpio:%u set pullup:%d\n", gpio, pull_up);
516 
517 	return 0;
518 }
519 
520 static void iproc_gpio_get_pull(struct iproc_gpio *chip, unsigned gpio,
521 				 bool *disable, bool *pull_up)
522 {
523 	void __iomem *base;
524 	unsigned long flags;
525 	unsigned int shift;
526 	u32 val_1, val_2;
527 
528 	raw_spin_lock_irqsave(&chip->lock, flags);
529 	if (chip->io_ctrl_type == IOCTRL_TYPE_CDRU) {
530 		base = chip->io_ctrl;
531 		shift = IPROC_GPIO_SHIFT(gpio);
532 
533 		val_1 = readl(base + IPROC_GPIO_PULL_UP_OFFSET) & BIT(shift);
534 		val_2 = readl(base + IPROC_GPIO_PULL_DN_OFFSET) & BIT(shift);
535 
536 		*pull_up = val_1 ? true : false;
537 		*disable = (val_1 | val_2) ? false : true;
538 
539 	} else {
540 		*disable = !iproc_get_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio);
541 		*pull_up = iproc_get_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio);
542 	}
543 	raw_spin_unlock_irqrestore(&chip->lock, flags);
544 }
545 
546 #define DRV_STRENGTH_OFFSET(gpio, bit, type)  ((type) == IOCTRL_TYPE_AON ? \
547 	((2 - (bit)) * 4 + IPROC_GPIO_DRV_CTRL_OFFSET) : \
548 	((type) == IOCTRL_TYPE_CDRU) ? \
549 	((bit) * 4 + IPROC_GPIO_DRV_CTRL_OFFSET) : \
550 	((bit) * 4 + IPROC_GPIO_REG(gpio, IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET)))
551 
552 static int iproc_gpio_set_strength(struct iproc_gpio *chip, unsigned gpio,
553 				    unsigned strength)
554 {
555 	void __iomem *base;
556 	unsigned int i, offset, shift;
557 	u32 val;
558 	unsigned long flags;
559 
560 	/* make sure drive strength is supported */
561 	if (strength < 2 ||  strength > 16 || (strength % 2))
562 		return -ENOTSUPP;
563 
564 	if (chip->io_ctrl) {
565 		base = chip->io_ctrl;
566 	} else {
567 		base = chip->base;
568 	}
569 
570 	shift = IPROC_GPIO_SHIFT(gpio);
571 
572 	dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio,
573 		strength);
574 
575 	raw_spin_lock_irqsave(&chip->lock, flags);
576 	strength = (strength / 2) - 1;
577 	for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) {
578 		offset = DRV_STRENGTH_OFFSET(gpio, i, chip->io_ctrl_type);
579 		val = readl(base + offset);
580 		val &= ~BIT(shift);
581 		val |= ((strength >> i) & 0x1) << shift;
582 		writel(val, base + offset);
583 	}
584 	raw_spin_unlock_irqrestore(&chip->lock, flags);
585 
586 	return 0;
587 }
588 
589 static int iproc_gpio_get_strength(struct iproc_gpio *chip, unsigned gpio,
590 				    u16 *strength)
591 {
592 	void __iomem *base;
593 	unsigned int i, offset, shift;
594 	u32 val;
595 	unsigned long flags;
596 
597 	if (chip->io_ctrl) {
598 		base = chip->io_ctrl;
599 	} else {
600 		base = chip->base;
601 	}
602 
603 	shift = IPROC_GPIO_SHIFT(gpio);
604 
605 	raw_spin_lock_irqsave(&chip->lock, flags);
606 	*strength = 0;
607 	for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) {
608 		offset = DRV_STRENGTH_OFFSET(gpio, i, chip->io_ctrl_type);
609 		val = readl(base + offset) & BIT(shift);
610 		val >>= shift;
611 		*strength += (val << i);
612 	}
613 
614 	/* convert to mA */
615 	*strength = (*strength + 1) * 2;
616 	raw_spin_unlock_irqrestore(&chip->lock, flags);
617 
618 	return 0;
619 }
620 
621 static int iproc_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
622 				 unsigned long *config)
623 {
624 	struct iproc_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
625 	enum pin_config_param param = pinconf_to_config_param(*config);
626 	unsigned gpio = iproc_pin_to_gpio(pin);
627 	u16 arg;
628 	bool disable, pull_up;
629 	int ret;
630 
631 	if (iproc_pinconf_param_is_disabled(chip, param))
632 		return -ENOTSUPP;
633 
634 	switch (param) {
635 	case PIN_CONFIG_BIAS_DISABLE:
636 		iproc_gpio_get_pull(chip, gpio, &disable, &pull_up);
637 		if (disable)
638 			return 0;
639 		else
640 			return -EINVAL;
641 
642 	case PIN_CONFIG_BIAS_PULL_UP:
643 		iproc_gpio_get_pull(chip, gpio, &disable, &pull_up);
644 		if (!disable && pull_up)
645 			return 0;
646 		else
647 			return -EINVAL;
648 
649 	case PIN_CONFIG_BIAS_PULL_DOWN:
650 		iproc_gpio_get_pull(chip, gpio, &disable, &pull_up);
651 		if (!disable && !pull_up)
652 			return 0;
653 		else
654 			return -EINVAL;
655 
656 	case PIN_CONFIG_DRIVE_STRENGTH:
657 		ret = iproc_gpio_get_strength(chip, gpio, &arg);
658 		if (ret)
659 			return ret;
660 		*config = pinconf_to_config_packed(param, arg);
661 
662 		return 0;
663 
664 	default:
665 		return -ENOTSUPP;
666 	}
667 
668 	return -ENOTSUPP;
669 }
670 
671 static int iproc_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
672 				 unsigned long *configs, unsigned num_configs)
673 {
674 	struct iproc_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
675 	enum pin_config_param param;
676 	u32 arg;
677 	unsigned i, gpio = iproc_pin_to_gpio(pin);
678 	int ret = -ENOTSUPP;
679 
680 	for (i = 0; i < num_configs; i++) {
681 		param = pinconf_to_config_param(configs[i]);
682 
683 		if (iproc_pinconf_param_is_disabled(chip, param))
684 			return -ENOTSUPP;
685 
686 		arg = pinconf_to_config_argument(configs[i]);
687 
688 		switch (param) {
689 		case PIN_CONFIG_BIAS_DISABLE:
690 			ret = iproc_gpio_set_pull(chip, gpio, true, false);
691 			if (ret < 0)
692 				goto out;
693 			break;
694 
695 		case PIN_CONFIG_BIAS_PULL_UP:
696 			ret = iproc_gpio_set_pull(chip, gpio, false, true);
697 			if (ret < 0)
698 				goto out;
699 			break;
700 
701 		case PIN_CONFIG_BIAS_PULL_DOWN:
702 			ret = iproc_gpio_set_pull(chip, gpio, false, false);
703 			if (ret < 0)
704 				goto out;
705 			break;
706 
707 		case PIN_CONFIG_DRIVE_STRENGTH:
708 			ret = iproc_gpio_set_strength(chip, gpio, arg);
709 			if (ret < 0)
710 				goto out;
711 			break;
712 
713 		default:
714 			dev_err(chip->dev, "invalid configuration\n");
715 			return -ENOTSUPP;
716 		}
717 	} /* for each config */
718 
719 out:
720 	return ret;
721 }
722 
723 static const struct pinconf_ops iproc_pconf_ops = {
724 	.is_generic = true,
725 	.pin_config_get = iproc_pin_config_get,
726 	.pin_config_set = iproc_pin_config_set,
727 };
728 
729 /*
730  * Iproc GPIO controller supports some PINCONF related configurations such as
731  * pull up, pull down, and drive strength, when the pin is configured to GPIO
732  *
733  * Here a local pinctrl device is created with simple 1-to-1 pin mapping to the
734  * local GPIO pins
735  */
736 static int iproc_gpio_register_pinconf(struct iproc_gpio *chip)
737 {
738 	struct pinctrl_desc *pctldesc = &chip->pctldesc;
739 	struct pinctrl_pin_desc *pins;
740 	struct gpio_chip *gc = &chip->gc;
741 	int i;
742 
743 	pins = devm_kcalloc(chip->dev, gc->ngpio, sizeof(*pins), GFP_KERNEL);
744 	if (!pins)
745 		return -ENOMEM;
746 
747 	for (i = 0; i < gc->ngpio; i++) {
748 		pins[i].number = i;
749 		pins[i].name = devm_kasprintf(chip->dev, GFP_KERNEL,
750 					      "gpio-%d", i);
751 		if (!pins[i].name)
752 			return -ENOMEM;
753 	}
754 
755 	pctldesc->name = dev_name(chip->dev);
756 	pctldesc->pctlops = &iproc_pctrl_ops;
757 	pctldesc->pins = pins;
758 	pctldesc->npins = gc->ngpio;
759 	pctldesc->confops = &iproc_pconf_ops;
760 
761 	chip->pctl = devm_pinctrl_register(chip->dev, pctldesc, chip);
762 	if (IS_ERR(chip->pctl)) {
763 		dev_err(chip->dev, "unable to register pinctrl device\n");
764 		return PTR_ERR(chip->pctl);
765 	}
766 
767 	return 0;
768 }
769 
770 static const struct of_device_id iproc_gpio_of_match[] = {
771 	{ .compatible = "brcm,iproc-gpio" },
772 	{ .compatible = "brcm,cygnus-ccm-gpio" },
773 	{ .compatible = "brcm,cygnus-asiu-gpio" },
774 	{ .compatible = "brcm,cygnus-crmu-gpio" },
775 	{ .compatible = "brcm,iproc-nsp-gpio" },
776 	{ .compatible = "brcm,iproc-stingray-gpio" },
777 	{ /* sentinel */ }
778 };
779 
780 static int iproc_gpio_probe(struct platform_device *pdev)
781 {
782 	struct device *dev = &pdev->dev;
783 	struct resource *res;
784 	struct iproc_gpio *chip;
785 	struct gpio_chip *gc;
786 	u32 ngpios, pinconf_disable_mask = 0;
787 	int irq, ret;
788 	bool no_pinconf = false;
789 	enum iproc_pinconf_ctrl_type io_ctrl_type = IOCTRL_TYPE_INVALID;
790 
791 	/* NSP does not support drive strength config */
792 	if (of_device_is_compatible(dev->of_node, "brcm,iproc-nsp-gpio"))
793 		pinconf_disable_mask = BIT(IPROC_PINCONF_DRIVE_STRENGTH);
794 	/* Stingray does not support pinconf in this controller */
795 	else if (of_device_is_compatible(dev->of_node,
796 					 "brcm,iproc-stingray-gpio"))
797 		no_pinconf = true;
798 
799 	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
800 	if (!chip)
801 		return -ENOMEM;
802 
803 	chip->dev = dev;
804 	platform_set_drvdata(pdev, chip);
805 
806 	chip->base = devm_platform_ioremap_resource(pdev, 0);
807 	if (IS_ERR(chip->base)) {
808 		dev_err(dev, "unable to map I/O memory\n");
809 		return PTR_ERR(chip->base);
810 	}
811 
812 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
813 	if (res) {
814 		chip->io_ctrl = devm_ioremap_resource(dev, res);
815 		if (IS_ERR(chip->io_ctrl))
816 			return PTR_ERR(chip->io_ctrl);
817 		if (of_device_is_compatible(dev->of_node,
818 					    "brcm,cygnus-ccm-gpio"))
819 			io_ctrl_type = IOCTRL_TYPE_CDRU;
820 		else
821 			io_ctrl_type = IOCTRL_TYPE_AON;
822 	}
823 
824 	chip->io_ctrl_type = io_ctrl_type;
825 
826 	if (of_property_read_u32(dev->of_node, "ngpios", &ngpios)) {
827 		dev_err(&pdev->dev, "missing ngpios DT property\n");
828 		return -ENODEV;
829 	}
830 
831 	raw_spin_lock_init(&chip->lock);
832 
833 	gc = &chip->gc;
834 	gc->base = -1;
835 	gc->ngpio = ngpios;
836 	chip->num_banks = (ngpios + NGPIOS_PER_BANK - 1) / NGPIOS_PER_BANK;
837 	gc->label = dev_name(dev);
838 	gc->parent = dev;
839 	gc->request = iproc_gpio_request;
840 	gc->free = iproc_gpio_free;
841 	gc->direction_input = iproc_gpio_direction_input;
842 	gc->direction_output = iproc_gpio_direction_output;
843 	gc->get_direction = iproc_gpio_get_direction;
844 	gc->set = iproc_gpio_set;
845 	gc->get = iproc_gpio_get;
846 
847 	chip->pinmux_is_supported = of_property_read_bool(dev->of_node,
848 							"gpio-ranges");
849 
850 	/* optional GPIO interrupt support */
851 	irq = platform_get_irq_optional(pdev, 0);
852 	if (irq > 0) {
853 		struct irq_chip *irqc;
854 		struct gpio_irq_chip *girq;
855 
856 		irqc = &chip->irqchip;
857 		irqc->name = dev_name(dev);
858 		irqc->irq_ack = iproc_gpio_irq_ack;
859 		irqc->irq_mask = iproc_gpio_irq_mask;
860 		irqc->irq_unmask = iproc_gpio_irq_unmask;
861 		irqc->irq_set_type = iproc_gpio_irq_set_type;
862 		irqc->irq_enable = iproc_gpio_irq_unmask;
863 		irqc->irq_disable = iproc_gpio_irq_mask;
864 
865 		girq = &gc->irq;
866 		girq->chip = irqc;
867 		girq->parent_handler = iproc_gpio_irq_handler;
868 		girq->num_parents = 1;
869 		girq->parents = devm_kcalloc(dev, 1,
870 					     sizeof(*girq->parents),
871 					     GFP_KERNEL);
872 		if (!girq->parents)
873 			return -ENOMEM;
874 		girq->parents[0] = irq;
875 		girq->default_type = IRQ_TYPE_NONE;
876 		girq->handler = handle_bad_irq;
877 	}
878 
879 	ret = gpiochip_add_data(gc, chip);
880 	if (ret < 0) {
881 		dev_err(dev, "unable to add GPIO chip\n");
882 		return ret;
883 	}
884 
885 	if (!no_pinconf) {
886 		ret = iproc_gpio_register_pinconf(chip);
887 		if (ret) {
888 			dev_err(dev, "unable to register pinconf\n");
889 			goto err_rm_gpiochip;
890 		}
891 
892 		if (pinconf_disable_mask) {
893 			ret = iproc_pinconf_disable_map_create(chip,
894 							 pinconf_disable_mask);
895 			if (ret) {
896 				dev_err(dev,
897 					"unable to create pinconf disable map\n");
898 				goto err_rm_gpiochip;
899 			}
900 		}
901 	}
902 
903 	return 0;
904 
905 err_rm_gpiochip:
906 	gpiochip_remove(gc);
907 
908 	return ret;
909 }
910 
911 static struct platform_driver iproc_gpio_driver = {
912 	.driver = {
913 		.name = "iproc-gpio",
914 		.of_match_table = iproc_gpio_of_match,
915 	},
916 	.probe = iproc_gpio_probe,
917 };
918 
919 static int __init iproc_gpio_init(void)
920 {
921 	return platform_driver_register(&iproc_gpio_driver);
922 }
923 arch_initcall_sync(iproc_gpio_init);
924