1# 2# PINCTRL infrastructure and drivers 3# 4 5config PINCTRL 6 bool 7 8if PINCTRL 9 10menu "Pin controllers" 11 depends on PINCTRL 12 13config PINMUX 14 bool "Support pin multiplexing controllers" 15 16config PINCONF 17 bool "Support pin configuration controllers" 18 19config GENERIC_PINCONF 20 bool 21 select PINCONF 22 23config DEBUG_PINCTRL 24 bool "Debug PINCTRL calls" 25 depends on DEBUG_KERNEL 26 help 27 Say Y here to add some extra checks and diagnostics to PINCTRL calls. 28 29config PINCTRL_ABX500 30 bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions" 31 depends on AB8500_CORE 32 select GENERIC_PINCONF 33 help 34 Select this to enable the ABx500 family IC GPIO driver 35 36config PINCTRL_AB8500 37 bool "AB8500 pin controller driver" 38 depends on PINCTRL_ABX500 && ARCH_U8500 39 40config PINCTRL_AB8540 41 bool "AB8540 pin controller driver" 42 depends on PINCTRL_ABX500 && ARCH_U8500 43 44config PINCTRL_AB9540 45 bool "AB9540 pin controller driver" 46 depends on PINCTRL_ABX500 && ARCH_U8500 47 48config PINCTRL_AB8505 49 bool "AB8505 pin controller driver" 50 depends on PINCTRL_ABX500 && ARCH_U8500 51 52config PINCTRL_ADI2 53 bool "ADI pin controller driver" 54 depends on BLACKFIN 55 select PINMUX 56 select IRQ_DOMAIN 57 help 58 This is the pin controller and gpio driver for ADI BF54x, BF60x and 59 future processors. This option is selected automatically when specific 60 machine and arch are selected to build. 61 62config PINCTRL_AS3722 63 bool "Pinctrl and GPIO driver for ams AS3722 PMIC" 64 depends on MFD_AS3722 && GPIOLIB 65 select PINMUX 66 select GENERIC_PINCONF 67 help 68 AS3722 device supports the configuration of GPIO pins for different 69 functionality. This driver supports the pinmux, push-pull and 70 open drain configuration for the GPIO pins of AS3722 devices. It also 71 supports the GPIO functionality through gpiolib. 72 73config PINCTRL_BF54x 74 def_bool y if BF54x 75 select PINCTRL_ADI2 76 77config PINCTRL_BF60x 78 def_bool y if BF60x 79 select PINCTRL_ADI2 80 81config PINCTRL_AT91 82 bool "AT91 pinctrl driver" 83 depends on OF 84 depends on ARCH_AT91 85 select PINMUX 86 select PINCONF 87 help 88 Say Y here to enable the at91 pinctrl driver 89 90config PINCTRL_BAYTRAIL 91 bool "Intel Baytrail GPIO pin control" 92 depends on GPIOLIB && ACPI && X86 93 select IRQ_DOMAIN 94 help 95 driver for memory mapped GPIO functionality on Intel Baytrail 96 platforms. Supports 3 banks with 102, 28 and 44 gpios. 97 Most pins are usually muxed to some other functionality by firmware, 98 so only a small amount is available for gpio use. 99 100 Requires ACPI device enumeration code to set up a platform device. 101 102config PINCTRL_BCM2835 103 bool 104 select PINMUX 105 select PINCONF 106 107config PINCTRL_IMX 108 bool 109 select PINMUX 110 select PINCONF 111 112config PINCTRL_IMX1_CORE 113 bool 114 select PINMUX 115 select PINCONF 116 117config PINCTRL_IMX27 118 bool "IMX27 pinctrl driver" 119 depends on OF 120 depends on SOC_IMX27 121 select PINCTRL_IMX1_CORE 122 help 123 Say Y here to enable the imx27 pinctrl driver 124 125config PINCTRL_IMX35 126 bool "IMX35 pinctrl driver" 127 depends on OF 128 depends on SOC_IMX35 129 select PINCTRL_IMX 130 help 131 Say Y here to enable the imx35 pinctrl driver 132 133config PINCTRL_IMX51 134 bool "IMX51 pinctrl driver" 135 depends on OF 136 depends on SOC_IMX51 137 select PINCTRL_IMX 138 help 139 Say Y here to enable the imx51 pinctrl driver 140 141config PINCTRL_IMX53 142 bool "IMX53 pinctrl driver" 143 depends on OF 144 depends on SOC_IMX53 145 select PINCTRL_IMX 146 help 147 Say Y here to enable the imx53 pinctrl driver 148 149config PINCTRL_IMX6Q 150 bool "IMX6Q/DL pinctrl driver" 151 depends on OF 152 depends on SOC_IMX6Q 153 select PINCTRL_IMX 154 help 155 Say Y here to enable the imx6q/dl pinctrl driver 156 157config PINCTRL_IMX6SL 158 bool "IMX6SL pinctrl driver" 159 depends on OF 160 depends on SOC_IMX6SL 161 select PINCTRL_IMX 162 help 163 Say Y here to enable the imx6sl pinctrl driver 164 165config PINCTRL_VF610 166 bool "Freescale Vybrid VF610 pinctrl driver" 167 depends on OF 168 depends on SOC_VF610 169 select PINCTRL_IMX 170 help 171 Say Y here to enable the Freescale Vybrid VF610 pinctrl driver 172 173config PINCTRL_LANTIQ 174 bool 175 depends on LANTIQ 176 select PINMUX 177 select PINCONF 178 179config PINCTRL_FALCON 180 bool 181 depends on SOC_FALCON 182 depends on PINCTRL_LANTIQ 183 184config PINCTRL_MXS 185 bool 186 select PINMUX 187 select PINCONF 188 189config PINCTRL_IMX23 190 bool 191 select PINCTRL_MXS 192 193config PINCTRL_IMX28 194 bool 195 select PINCTRL_MXS 196 197config PINCTRL_NOMADIK 198 bool "Nomadik pin controller driver" 199 depends on ARCH_U8500 || ARCH_NOMADIK 200 select PINMUX 201 select PINCONF 202 203config PINCTRL_STN8815 204 bool "STN8815 pin controller driver" 205 depends on PINCTRL_NOMADIK && ARCH_NOMADIK 206 207config PINCTRL_DB8500 208 bool "DB8500 pin controller driver" 209 depends on PINCTRL_NOMADIK && ARCH_U8500 210 211config PINCTRL_DB8540 212 bool "DB8540 pin controller driver" 213 depends on PINCTRL_NOMADIK && ARCH_U8500 214 215config PINCTRL_ROCKCHIP 216 bool 217 select PINMUX 218 select GENERIC_PINCONF 219 select GENERIC_IRQ_CHIP 220 221config PINCTRL_SINGLE 222 tristate "One-register-per-pin type device tree based pinctrl driver" 223 depends on OF 224 select PINMUX 225 select PINCONF 226 select GENERIC_PINCONF 227 help 228 This selects the device tree based generic pinctrl driver. 229 230config PINCTRL_SIRF 231 bool "CSR SiRFprimaII/SiRFmarco pin controller driver" 232 depends on ARCH_SIRF 233 select PINMUX 234 235config PINCTRL_SUNXI 236 bool 237 select PINMUX 238 select GENERIC_PINCONF 239 240config PINCTRL_ST 241 bool 242 depends on OF 243 select PINMUX 244 select PINCONF 245 246config PINCTRL_TEGRA 247 bool 248 select PINMUX 249 select PINCONF 250 251config PINCTRL_TEGRA20 252 bool 253 select PINCTRL_TEGRA 254 255config PINCTRL_TEGRA30 256 bool 257 select PINCTRL_TEGRA 258 259config PINCTRL_TEGRA114 260 bool 261 select PINCTRL_TEGRA 262 263config PINCTRL_TZ1090 264 bool "Toumaz Xenif TZ1090 pin control driver" 265 depends on SOC_TZ1090 266 select PINMUX 267 select GENERIC_PINCONF 268 269config PINCTRL_TZ1090_PDC 270 bool "Toumaz Xenif TZ1090 PDC pin control driver" 271 depends on SOC_TZ1090 272 select PINMUX 273 select PINCONF 274 275config PINCTRL_U300 276 bool "U300 pin controller driver" 277 depends on ARCH_U300 278 select PINMUX 279 select GENERIC_PINCONF 280 281config PINCTRL_COH901 282 bool "ST-Ericsson U300 COH 901 335/571 GPIO" 283 depends on GPIOLIB && ARCH_U300 && PINCTRL_U300 284 help 285 Say yes here to support GPIO interface on ST-Ericsson U300. 286 The names of the two IP block variants supported are 287 COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 288 ports of 8 GPIO pins each. 289 290config PINCTRL_SAMSUNG 291 bool 292 select PINMUX 293 select PINCONF 294 295config PINCTRL_EXYNOS 296 bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440" 297 depends on OF && GPIOLIB && (ARCH_EXYNOS || ARCH_S5PV210) 298 select PINCTRL_SAMSUNG 299 300config PINCTRL_EXYNOS5440 301 bool "Samsung EXYNOS5440 SoC pinctrl driver" 302 depends on SOC_EXYNOS5440 303 select PINMUX 304 select PINCONF 305 306config PINCTRL_PALMAS 307 bool "Pinctrl driver for the PALMAS Series MFD devices" 308 depends on OF && MFD_PALMAS 309 select PINMUX 310 select GENERIC_PINCONF 311 help 312 Palmas device supports the configuration of pins for different 313 functionality. This driver supports the pinmux, push-pull and 314 open drain configuration for the Palmas series devices like 315 TPS65913, TPS80036 etc. 316 317config PINCTRL_S3C24XX 318 bool "Samsung S3C24XX SoC pinctrl driver" 319 depends on ARCH_S3C24XX 320 select PINCTRL_SAMSUNG 321 322config PINCTRL_S3C64XX 323 bool "Samsung S3C64XX SoC pinctrl driver" 324 depends on ARCH_S3C64XX 325 select PINCTRL_SAMSUNG 326 327source "drivers/pinctrl/mvebu/Kconfig" 328source "drivers/pinctrl/sh-pfc/Kconfig" 329source "drivers/pinctrl/spear/Kconfig" 330source "drivers/pinctrl/vt8500/Kconfig" 331 332config PINCTRL_XWAY 333 bool 334 depends on SOC_TYPE_XWAY 335 depends on PINCTRL_LANTIQ 336 337config PINCTRL_TB10X 338 bool 339 depends on ARC_PLAT_TB10X 340 341endmenu 342 343endif 344