1# 2# PINCTRL infrastructure and drivers 3# 4 5config PINCTRL 6 bool 7 8if PINCTRL 9 10menu "Pin controllers" 11 depends on PINCTRL 12 13config PINMUX 14 bool "Support pin multiplexing controllers" if COMPILE_TEST 15 16config PINCONF 17 bool "Support pin configuration controllers" if COMPILE_TEST 18 19config GENERIC_PINCONF 20 bool 21 select PINCONF 22 23config DEBUG_PINCTRL 24 bool "Debug PINCTRL calls" 25 depends on DEBUG_KERNEL 26 help 27 Say Y here to add some extra checks and diagnostics to PINCTRL calls. 28 29config PINCTRL_ADI2 30 bool "ADI pin controller driver" 31 depends on BLACKFIN 32 select PINMUX 33 select IRQ_DOMAIN 34 help 35 This is the pin controller and gpio driver for ADI BF54x, BF60x and 36 future processors. This option is selected automatically when specific 37 machine and arch are selected to build. 38 39config PINCTRL_AS3722 40 bool "Pinctrl and GPIO driver for ams AS3722 PMIC" 41 depends on MFD_AS3722 && GPIOLIB 42 select PINMUX 43 select GENERIC_PINCONF 44 help 45 AS3722 device supports the configuration of GPIO pins for different 46 functionality. This driver supports the pinmux, push-pull and 47 open drain configuration for the GPIO pins of AS3722 devices. It also 48 supports the GPIO functionality through gpiolib. 49 50config PINCTRL_BF54x 51 def_bool y if BF54x 52 select PINCTRL_ADI2 53 54config PINCTRL_BF60x 55 def_bool y if BF60x 56 select PINCTRL_ADI2 57 58config PINCTRL_AT91 59 bool "AT91 pinctrl driver" 60 depends on OF 61 depends on ARCH_AT91 62 select PINMUX 63 select PINCONF 64 select GPIOLIB 65 select OF_GPIO 66 select GPIOLIB_IRQCHIP 67 help 68 Say Y here to enable the at91 pinctrl driver 69 70config PINCTRL_BAYTRAIL 71 bool "Intel Baytrail GPIO pin control" 72 depends on GPIOLIB && ACPI && X86 73 select GPIOLIB_IRQCHIP 74 help 75 driver for memory mapped GPIO functionality on Intel Baytrail 76 platforms. Supports 3 banks with 102, 28 and 44 gpios. 77 Most pins are usually muxed to some other functionality by firmware, 78 so only a small amount is available for gpio use. 79 80 Requires ACPI device enumeration code to set up a platform device. 81 82config PINCTRL_BCM2835 83 bool 84 select PINMUX 85 select PINCONF 86 87config PINCTRL_BCM281XX 88 bool "Broadcom BCM281xx pinctrl driver" 89 depends on OF 90 select PINMUX 91 select PINCONF 92 select GENERIC_PINCONF 93 select REGMAP_MMIO 94 help 95 Say Y here to support Broadcom BCM281xx pinctrl driver, which is used 96 for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351, 97 BCM28145, and BCM28155 SoCs. This driver requires the pinctrl 98 framework. GPIO is provided by a separate GPIO driver. 99 100config PINCTRL_IMX 101 bool 102 select PINMUX 103 select PINCONF 104 105config PINCTRL_IMX1_CORE 106 bool 107 select PINMUX 108 select PINCONF 109 110config PINCTRL_IMX1 111 bool "IMX1 pinctrl driver" 112 depends on SOC_IMX1 113 select PINCTRL_IMX1_CORE 114 help 115 Say Y here to enable the imx1 pinctrl driver 116 117config PINCTRL_IMX27 118 bool "IMX27 pinctrl driver" 119 depends on SOC_IMX27 120 select PINCTRL_IMX1_CORE 121 help 122 Say Y here to enable the imx27 pinctrl driver 123 124 125config PINCTRL_IMX25 126 bool "IMX25 pinctrl driver" 127 depends on OF 128 depends on SOC_IMX25 129 select PINCTRL_IMX 130 help 131 Say Y here to enable the imx25 pinctrl driver 132 133config PINCTRL_IMX35 134 bool "IMX35 pinctrl driver" 135 depends on SOC_IMX35 136 select PINCTRL_IMX 137 help 138 Say Y here to enable the imx35 pinctrl driver 139 140config PINCTRL_IMX50 141 bool "IMX50 pinctrl driver" 142 depends on SOC_IMX50 143 select PINCTRL_IMX 144 help 145 Say Y here to enable the imx50 pinctrl driver 146 147config PINCTRL_IMX51 148 bool "IMX51 pinctrl driver" 149 depends on SOC_IMX51 150 select PINCTRL_IMX 151 help 152 Say Y here to enable the imx51 pinctrl driver 153 154config PINCTRL_IMX53 155 bool "IMX53 pinctrl driver" 156 depends on SOC_IMX53 157 select PINCTRL_IMX 158 help 159 Say Y here to enable the imx53 pinctrl driver 160 161config PINCTRL_IMX6Q 162 bool "IMX6Q/DL pinctrl driver" 163 depends on SOC_IMX6Q 164 select PINCTRL_IMX 165 help 166 Say Y here to enable the imx6q/dl pinctrl driver 167 168config PINCTRL_IMX6SL 169 bool "IMX6SL pinctrl driver" 170 depends on SOC_IMX6SL 171 select PINCTRL_IMX 172 help 173 Say Y here to enable the imx6sl pinctrl driver 174 175config PINCTRL_IMX6SX 176 bool "IMX6SX pinctrl driver" 177 depends on SOC_IMX6SX 178 select PINCTRL_IMX 179 help 180 Say Y here to enable the imx6sx pinctrl driver 181 182config PINCTRL_VF610 183 bool "Freescale Vybrid VF610 pinctrl driver" 184 depends on SOC_VF610 185 select PINCTRL_IMX 186 help 187 Say Y here to enable the Freescale Vybrid VF610 pinctrl driver 188 189config PINCTRL_LANTIQ 190 bool 191 depends on LANTIQ 192 select PINMUX 193 select PINCONF 194 195config PINCTRL_FALCON 196 bool 197 depends on SOC_FALCON 198 depends on PINCTRL_LANTIQ 199 200config PINCTRL_MXS 201 bool 202 select PINMUX 203 select PINCONF 204 205config PINCTRL_IMX23 206 bool 207 select PINCTRL_MXS 208 209config PINCTRL_IMX28 210 bool 211 select PINCTRL_MXS 212 213config PINCTRL_ROCKCHIP 214 bool 215 select PINMUX 216 select GENERIC_PINCONF 217 select GENERIC_IRQ_CHIP 218 select MFD_SYSCON 219 220config PINCTRL_SINGLE 221 tristate "One-register-per-pin type device tree based pinctrl driver" 222 depends on OF 223 select PINMUX 224 select PINCONF 225 select GENERIC_PINCONF 226 help 227 This selects the device tree based generic pinctrl driver. 228 229config PINCTRL_SIRF 230 bool "CSR SiRFprimaII/SiRFmarco pin controller driver" 231 depends on ARCH_SIRF 232 select PINMUX 233 select GPIOLIB_IRQCHIP 234 235config PINCTRL_ST 236 bool 237 depends on OF 238 select PINMUX 239 select PINCONF 240 select GPIOLIB_IRQCHIP 241 242config PINCTRL_TEGRA 243 bool 244 select PINMUX 245 select PINCONF 246 247config PINCTRL_TEGRA20 248 bool 249 select PINCTRL_TEGRA 250 251config PINCTRL_TEGRA30 252 bool 253 select PINCTRL_TEGRA 254 255config PINCTRL_TEGRA114 256 bool 257 select PINCTRL_TEGRA 258 259config PINCTRL_TEGRA124 260 bool 261 select PINCTRL_TEGRA 262 263config PINCTRL_TEGRA_XUSB 264 def_bool y if ARCH_TEGRA 265 select GENERIC_PHY 266 select PINCONF 267 select PINMUX 268 269config PINCTRL_TZ1090 270 bool "Toumaz Xenif TZ1090 pin control driver" 271 depends on SOC_TZ1090 272 select PINMUX 273 select GENERIC_PINCONF 274 275config PINCTRL_TZ1090_PDC 276 bool "Toumaz Xenif TZ1090 PDC pin control driver" 277 depends on SOC_TZ1090 278 select PINMUX 279 select PINCONF 280 281config PINCTRL_U300 282 bool "U300 pin controller driver" 283 depends on ARCH_U300 284 select PINMUX 285 select GENERIC_PINCONF 286 287config PINCTRL_COH901 288 bool "ST-Ericsson U300 COH 901 335/571 GPIO" 289 depends on GPIOLIB && ARCH_U300 && PINCTRL_U300 290 select GPIOLIB_IRQCHIP 291 help 292 Say yes here to support GPIO interface on ST-Ericsson U300. 293 The names of the two IP block variants supported are 294 COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 295 ports of 8 GPIO pins each. 296 297config PINCTRL_PALMAS 298 bool "Pinctrl driver for the PALMAS Series MFD devices" 299 depends on OF && MFD_PALMAS 300 select PINMUX 301 select GENERIC_PINCONF 302 help 303 Palmas device supports the configuration of pins for different 304 functionality. This driver supports the pinmux, push-pull and 305 open drain configuration for the Palmas series devices like 306 TPS65913, TPS80036 etc. 307 308source "drivers/pinctrl/berlin/Kconfig" 309source "drivers/pinctrl/mvebu/Kconfig" 310source "drivers/pinctrl/nomadik/Kconfig" 311source "drivers/pinctrl/qcom/Kconfig" 312source "drivers/pinctrl/samsung/Kconfig" 313source "drivers/pinctrl/sh-pfc/Kconfig" 314source "drivers/pinctrl/spear/Kconfig" 315source "drivers/pinctrl/sunxi/Kconfig" 316source "drivers/pinctrl/vt8500/Kconfig" 317 318config PINCTRL_XWAY 319 bool 320 depends on SOC_TYPE_XWAY 321 depends on PINCTRL_LANTIQ 322 323config PINCTRL_TB10X 324 bool 325 depends on ARC_PLAT_TB10X 326 327endmenu 328 329endif 330