1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * phy-zynqmp.c - PHY driver for Xilinx ZynqMP GT. 4 * 5 * Copyright (C) 2018-2020 Xilinx Inc. 6 * 7 * Author: Anurag Kumar Vulisha <anuragku@xilinx.com> 8 * Author: Subbaraya Sundeep <sundeep.lkml@gmail.com> 9 * Author: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 10 * 11 * This driver is tested for USB, SATA and Display Port currently. 12 * Other controllers PCIe and SGMII should also work but that is 13 * experimental as of now. 14 */ 15 16 #include <linux/clk.h> 17 #include <linux/delay.h> 18 #include <linux/io.h> 19 #include <linux/kernel.h> 20 #include <linux/module.h> 21 #include <linux/of.h> 22 #include <linux/phy/phy.h> 23 #include <linux/platform_device.h> 24 #include <linux/slab.h> 25 26 #include <dt-bindings/phy/phy.h> 27 28 /* 29 * Lane Registers 30 */ 31 32 /* TX De-emphasis parameters */ 33 #define L0_TX_ANA_TM_18 0x0048 34 #define L0_TX_ANA_TM_118 0x01d8 35 #define L0_TX_ANA_TM_118_FORCE_17_0 BIT(0) 36 37 /* DN Resistor calibration code parameters */ 38 #define L0_TXPMA_ST_3 0x0b0c 39 #define L0_DN_CALIB_CODE 0x3f 40 41 /* PMA control parameters */ 42 #define L0_TXPMD_TM_45 0x0cb4 43 #define L0_TXPMD_TM_48 0x0cc0 44 #define L0_TXPMD_TM_45_OVER_DP_MAIN BIT(0) 45 #define L0_TXPMD_TM_45_ENABLE_DP_MAIN BIT(1) 46 #define L0_TXPMD_TM_45_OVER_DP_POST1 BIT(2) 47 #define L0_TXPMD_TM_45_ENABLE_DP_POST1 BIT(3) 48 #define L0_TXPMD_TM_45_OVER_DP_POST2 BIT(4) 49 #define L0_TXPMD_TM_45_ENABLE_DP_POST2 BIT(5) 50 51 /* PCS control parameters */ 52 #define L0_TM_DIG_6 0x106c 53 #define L0_TM_DIS_DESCRAMBLE_DECODER 0x0f 54 #define L0_TX_DIG_61 0x00f4 55 #define L0_TM_DISABLE_SCRAMBLE_ENCODER 0x0f 56 57 /* PLL Test Mode register parameters */ 58 #define L0_TM_PLL_DIG_37 0x2094 59 #define L0_TM_COARSE_CODE_LIMIT 0x10 60 61 /* PLL SSC step size offsets */ 62 #define L0_PLL_SS_STEPS_0_LSB 0x2368 63 #define L0_PLL_SS_STEPS_1_MSB 0x236c 64 #define L0_PLL_SS_STEP_SIZE_0_LSB 0x2370 65 #define L0_PLL_SS_STEP_SIZE_1 0x2374 66 #define L0_PLL_SS_STEP_SIZE_2 0x2378 67 #define L0_PLL_SS_STEP_SIZE_3_MSB 0x237c 68 #define L0_PLL_STATUS_READ_1 0x23e4 69 70 /* SSC step size parameters */ 71 #define STEP_SIZE_0_MASK 0xff 72 #define STEP_SIZE_1_MASK 0xff 73 #define STEP_SIZE_2_MASK 0xff 74 #define STEP_SIZE_3_MASK 0x3 75 #define STEP_SIZE_SHIFT 8 76 #define FORCE_STEP_SIZE 0x10 77 #define FORCE_STEPS 0x20 78 #define STEPS_0_MASK 0xff 79 #define STEPS_1_MASK 0x07 80 81 /* Reference clock selection parameters */ 82 #define L0_Ln_REF_CLK_SEL(n) (0x2860 + (n) * 4) 83 #define L0_REF_CLK_SEL_MASK 0x8f 84 85 /* Calibration digital logic parameters */ 86 #define L3_TM_CALIB_DIG19 0xec4c 87 #define L3_CALIB_DONE_STATUS 0xef14 88 #define L3_TM_CALIB_DIG18 0xec48 89 #define L3_TM_CALIB_DIG19_NSW 0x07 90 #define L3_TM_CALIB_DIG18_NSW 0xe0 91 #define L3_TM_OVERRIDE_NSW_CODE 0x20 92 #define L3_CALIB_DONE 0x02 93 #define L3_NSW_SHIFT 5 94 #define L3_NSW_PIPE_SHIFT 4 95 #define L3_NSW_CALIB_SHIFT 3 96 97 #define PHY_REG_OFFSET 0x4000 98 99 /* 100 * Global Registers 101 */ 102 103 /* Refclk selection parameters */ 104 #define PLL_REF_SEL(n) (0x10000 + (n) * 4) 105 #define PLL_FREQ_MASK 0x1f 106 #define PLL_STATUS_LOCKED 0x10 107 108 /* Inter Connect Matrix parameters */ 109 #define ICM_CFG0 0x10010 110 #define ICM_CFG1 0x10014 111 #define ICM_CFG0_L0_MASK 0x07 112 #define ICM_CFG0_L1_MASK 0x70 113 #define ICM_CFG1_L2_MASK 0x07 114 #define ICM_CFG2_L3_MASK 0x70 115 #define ICM_CFG_SHIFT 4 116 117 /* Inter Connect Matrix allowed protocols */ 118 #define ICM_PROTOCOL_PD 0x0 119 #define ICM_PROTOCOL_PCIE 0x1 120 #define ICM_PROTOCOL_SATA 0x2 121 #define ICM_PROTOCOL_USB 0x3 122 #define ICM_PROTOCOL_DP 0x4 123 #define ICM_PROTOCOL_SGMII 0x5 124 125 /* Test Mode common reset control parameters */ 126 #define TM_CMN_RST 0x10018 127 #define TM_CMN_RST_EN 0x1 128 #define TM_CMN_RST_SET 0x2 129 #define TM_CMN_RST_MASK 0x3 130 131 /* Bus width parameters */ 132 #define TX_PROT_BUS_WIDTH 0x10040 133 #define RX_PROT_BUS_WIDTH 0x10044 134 #define PROT_BUS_WIDTH_10 0x0 135 #define PROT_BUS_WIDTH_20 0x1 136 #define PROT_BUS_WIDTH_40 0x2 137 #define PROT_BUS_WIDTH_SHIFT 2 138 139 /* Number of GT lanes */ 140 #define NUM_LANES 4 141 142 /* SIOU SATA control register */ 143 #define SATA_CONTROL_OFFSET 0x0100 144 145 /* Total number of controllers */ 146 #define CONTROLLERS_PER_LANE 5 147 148 /* Protocol Type parameters */ 149 #define XPSGTR_TYPE_USB0 0 /* USB controller 0 */ 150 #define XPSGTR_TYPE_USB1 1 /* USB controller 1 */ 151 #define XPSGTR_TYPE_SATA_0 2 /* SATA controller lane 0 */ 152 #define XPSGTR_TYPE_SATA_1 3 /* SATA controller lane 1 */ 153 #define XPSGTR_TYPE_PCIE_0 4 /* PCIe controller lane 0 */ 154 #define XPSGTR_TYPE_PCIE_1 5 /* PCIe controller lane 1 */ 155 #define XPSGTR_TYPE_PCIE_2 6 /* PCIe controller lane 2 */ 156 #define XPSGTR_TYPE_PCIE_3 7 /* PCIe controller lane 3 */ 157 #define XPSGTR_TYPE_DP_0 8 /* Display Port controller lane 0 */ 158 #define XPSGTR_TYPE_DP_1 9 /* Display Port controller lane 1 */ 159 #define XPSGTR_TYPE_SGMII0 10 /* Ethernet SGMII controller 0 */ 160 #define XPSGTR_TYPE_SGMII1 11 /* Ethernet SGMII controller 1 */ 161 #define XPSGTR_TYPE_SGMII2 12 /* Ethernet SGMII controller 2 */ 162 #define XPSGTR_TYPE_SGMII3 13 /* Ethernet SGMII controller 3 */ 163 164 /* Timeout values */ 165 #define TIMEOUT_US 1000 166 167 struct xpsgtr_dev; 168 169 /** 170 * struct xpsgtr_ssc - structure to hold SSC settings for a lane 171 * @refclk_rate: PLL reference clock frequency 172 * @pll_ref_clk: value to be written to register for corresponding ref clk rate 173 * @steps: number of steps of SSC (Spread Spectrum Clock) 174 * @step_size: step size of each step 175 */ 176 struct xpsgtr_ssc { 177 u32 refclk_rate; 178 u8 pll_ref_clk; 179 u32 steps; 180 u32 step_size; 181 }; 182 183 /** 184 * struct xpsgtr_phy - representation of a lane 185 * @phy: pointer to the kernel PHY device 186 * @type: controller which uses this lane 187 * @lane: lane number 188 * @protocol: protocol in which the lane operates 189 * @skip_phy_init: skip phy_init() if true 190 * @dev: pointer to the xpsgtr_dev instance 191 * @refclk: reference clock index 192 */ 193 struct xpsgtr_phy { 194 struct phy *phy; 195 u8 type; 196 u8 lane; 197 u8 protocol; 198 bool skip_phy_init; 199 struct xpsgtr_dev *dev; 200 unsigned int refclk; 201 }; 202 203 /** 204 * struct xpsgtr_dev - representation of a ZynMP GT device 205 * @dev: pointer to device 206 * @serdes: serdes base address 207 * @siou: siou base address 208 * @gtr_mutex: mutex for locking 209 * @phys: PHY lanes 210 * @refclk_sscs: spread spectrum settings for the reference clocks 211 * @clk: reference clocks 212 * @tx_term_fix: fix for GT issue 213 * @saved_icm_cfg0: stored value of ICM CFG0 register 214 * @saved_icm_cfg1: stored value of ICM CFG1 register 215 */ 216 struct xpsgtr_dev { 217 struct device *dev; 218 void __iomem *serdes; 219 void __iomem *siou; 220 struct mutex gtr_mutex; /* mutex for locking */ 221 struct xpsgtr_phy phys[NUM_LANES]; 222 const struct xpsgtr_ssc *refclk_sscs[NUM_LANES]; 223 struct clk *clk[NUM_LANES]; 224 bool tx_term_fix; 225 unsigned int saved_icm_cfg0; 226 unsigned int saved_icm_cfg1; 227 }; 228 229 /* 230 * Configuration Data 231 */ 232 233 /* lookup table to hold all settings needed for a ref clock frequency */ 234 static const struct xpsgtr_ssc ssc_lookup[] = { 235 { 19200000, 0x05, 608, 264020 }, 236 { 20000000, 0x06, 634, 243454 }, 237 { 24000000, 0x07, 760, 168973 }, 238 { 26000000, 0x08, 824, 143860 }, 239 { 27000000, 0x09, 856, 86551 }, 240 { 38400000, 0x0a, 1218, 65896 }, 241 { 40000000, 0x0b, 634, 243454 }, 242 { 52000000, 0x0c, 824, 143860 }, 243 { 100000000, 0x0d, 1058, 87533 }, 244 { 108000000, 0x0e, 856, 86551 }, 245 { 125000000, 0x0f, 992, 119497 }, 246 { 135000000, 0x10, 1070, 55393 }, 247 { 150000000, 0x11, 792, 187091 } 248 }; 249 250 /* 251 * I/O Accessors 252 */ 253 254 static inline u32 xpsgtr_read(struct xpsgtr_dev *gtr_dev, u32 reg) 255 { 256 return readl(gtr_dev->serdes + reg); 257 } 258 259 static inline void xpsgtr_write(struct xpsgtr_dev *gtr_dev, u32 reg, u32 value) 260 { 261 writel(value, gtr_dev->serdes + reg); 262 } 263 264 static inline void xpsgtr_clr_set(struct xpsgtr_dev *gtr_dev, u32 reg, 265 u32 clr, u32 set) 266 { 267 u32 value = xpsgtr_read(gtr_dev, reg); 268 269 value &= ~clr; 270 value |= set; 271 xpsgtr_write(gtr_dev, reg, value); 272 } 273 274 static inline u32 xpsgtr_read_phy(struct xpsgtr_phy *gtr_phy, u32 reg) 275 { 276 void __iomem *addr = gtr_phy->dev->serdes 277 + gtr_phy->lane * PHY_REG_OFFSET + reg; 278 279 return readl(addr); 280 } 281 282 static inline void xpsgtr_write_phy(struct xpsgtr_phy *gtr_phy, 283 u32 reg, u32 value) 284 { 285 void __iomem *addr = gtr_phy->dev->serdes 286 + gtr_phy->lane * PHY_REG_OFFSET + reg; 287 288 writel(value, addr); 289 } 290 291 static inline void xpsgtr_clr_set_phy(struct xpsgtr_phy *gtr_phy, 292 u32 reg, u32 clr, u32 set) 293 { 294 void __iomem *addr = gtr_phy->dev->serdes 295 + gtr_phy->lane * PHY_REG_OFFSET + reg; 296 297 writel((readl(addr) & ~clr) | set, addr); 298 } 299 300 /* 301 * Hardware Configuration 302 */ 303 304 /* Wait for the PLL to lock (with a timeout). */ 305 static int xpsgtr_wait_pll_lock(struct phy *phy) 306 { 307 struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy); 308 struct xpsgtr_dev *gtr_dev = gtr_phy->dev; 309 unsigned int timeout = TIMEOUT_US; 310 int ret; 311 312 dev_dbg(gtr_dev->dev, "Waiting for PLL lock\n"); 313 314 while (1) { 315 u32 reg = xpsgtr_read_phy(gtr_phy, L0_PLL_STATUS_READ_1); 316 317 if ((reg & PLL_STATUS_LOCKED) == PLL_STATUS_LOCKED) { 318 ret = 0; 319 break; 320 } 321 322 if (--timeout == 0) { 323 ret = -ETIMEDOUT; 324 break; 325 } 326 327 udelay(1); 328 } 329 330 if (ret == -ETIMEDOUT) 331 dev_err(gtr_dev->dev, 332 "lane %u (type %u, protocol %u): PLL lock timeout\n", 333 gtr_phy->lane, gtr_phy->type, gtr_phy->protocol); 334 335 return ret; 336 } 337 338 /* Configure PLL and spread-sprectrum clock. */ 339 static void xpsgtr_configure_pll(struct xpsgtr_phy *gtr_phy) 340 { 341 const struct xpsgtr_ssc *ssc; 342 u32 step_size; 343 344 ssc = gtr_phy->dev->refclk_sscs[gtr_phy->refclk]; 345 step_size = ssc->step_size; 346 347 xpsgtr_clr_set(gtr_phy->dev, PLL_REF_SEL(gtr_phy->lane), 348 PLL_FREQ_MASK, ssc->pll_ref_clk); 349 350 /* Enable lane clock sharing, if required */ 351 if (gtr_phy->refclk != gtr_phy->lane) { 352 /* Lane3 Ref Clock Selection Register */ 353 xpsgtr_clr_set(gtr_phy->dev, L0_Ln_REF_CLK_SEL(gtr_phy->lane), 354 L0_REF_CLK_SEL_MASK, 1 << gtr_phy->refclk); 355 } 356 357 /* SSC step size [7:0] */ 358 xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_0_LSB, 359 STEP_SIZE_0_MASK, step_size & STEP_SIZE_0_MASK); 360 361 /* SSC step size [15:8] */ 362 step_size >>= STEP_SIZE_SHIFT; 363 xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_1, 364 STEP_SIZE_1_MASK, step_size & STEP_SIZE_1_MASK); 365 366 /* SSC step size [23:16] */ 367 step_size >>= STEP_SIZE_SHIFT; 368 xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_2, 369 STEP_SIZE_2_MASK, step_size & STEP_SIZE_2_MASK); 370 371 /* SSC steps [7:0] */ 372 xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEPS_0_LSB, 373 STEPS_0_MASK, ssc->steps & STEPS_0_MASK); 374 375 /* SSC steps [10:8] */ 376 xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEPS_1_MSB, 377 STEPS_1_MASK, 378 (ssc->steps >> STEP_SIZE_SHIFT) & STEPS_1_MASK); 379 380 /* SSC step size [24:25] */ 381 step_size >>= STEP_SIZE_SHIFT; 382 xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_3_MSB, 383 STEP_SIZE_3_MASK, (step_size & STEP_SIZE_3_MASK) | 384 FORCE_STEP_SIZE | FORCE_STEPS); 385 } 386 387 /* Configure the lane protocol. */ 388 static void xpsgtr_lane_set_protocol(struct xpsgtr_phy *gtr_phy) 389 { 390 struct xpsgtr_dev *gtr_dev = gtr_phy->dev; 391 u8 protocol = gtr_phy->protocol; 392 393 switch (gtr_phy->lane) { 394 case 0: 395 xpsgtr_clr_set(gtr_dev, ICM_CFG0, ICM_CFG0_L0_MASK, protocol); 396 break; 397 case 1: 398 xpsgtr_clr_set(gtr_dev, ICM_CFG0, ICM_CFG0_L1_MASK, 399 protocol << ICM_CFG_SHIFT); 400 break; 401 case 2: 402 xpsgtr_clr_set(gtr_dev, ICM_CFG1, ICM_CFG0_L0_MASK, protocol); 403 break; 404 case 3: 405 xpsgtr_clr_set(gtr_dev, ICM_CFG1, ICM_CFG0_L1_MASK, 406 protocol << ICM_CFG_SHIFT); 407 break; 408 default: 409 /* We already checked 0 <= lane <= 3 */ 410 break; 411 } 412 } 413 414 /* Bypass (de)scrambler and 8b/10b decoder and encoder. */ 415 static void xpsgtr_bypass_scrambler_8b10b(struct xpsgtr_phy *gtr_phy) 416 { 417 xpsgtr_write_phy(gtr_phy, L0_TM_DIG_6, L0_TM_DIS_DESCRAMBLE_DECODER); 418 xpsgtr_write_phy(gtr_phy, L0_TX_DIG_61, L0_TM_DISABLE_SCRAMBLE_ENCODER); 419 } 420 421 /* DP-specific initialization. */ 422 static void xpsgtr_phy_init_dp(struct xpsgtr_phy *gtr_phy) 423 { 424 xpsgtr_write_phy(gtr_phy, L0_TXPMD_TM_45, 425 L0_TXPMD_TM_45_OVER_DP_MAIN | 426 L0_TXPMD_TM_45_ENABLE_DP_MAIN | 427 L0_TXPMD_TM_45_OVER_DP_POST1 | 428 L0_TXPMD_TM_45_OVER_DP_POST2 | 429 L0_TXPMD_TM_45_ENABLE_DP_POST2); 430 xpsgtr_write_phy(gtr_phy, L0_TX_ANA_TM_118, 431 L0_TX_ANA_TM_118_FORCE_17_0); 432 } 433 434 /* SATA-specific initialization. */ 435 static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy) 436 { 437 struct xpsgtr_dev *gtr_dev = gtr_phy->dev; 438 439 xpsgtr_bypass_scrambler_8b10b(gtr_phy); 440 441 writel(gtr_phy->lane, gtr_dev->siou + SATA_CONTROL_OFFSET); 442 } 443 444 /* SGMII-specific initialization. */ 445 static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy) 446 { 447 struct xpsgtr_dev *gtr_dev = gtr_phy->dev; 448 449 /* Set SGMII protocol TX and RX bus width to 10 bits. */ 450 xpsgtr_write(gtr_dev, TX_PROT_BUS_WIDTH, 451 PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT)); 452 xpsgtr_write(gtr_dev, RX_PROT_BUS_WIDTH, 453 PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT)); 454 455 xpsgtr_bypass_scrambler_8b10b(gtr_phy); 456 } 457 458 /* Configure TX de-emphasis and margining for DP. */ 459 static void xpsgtr_phy_configure_dp(struct xpsgtr_phy *gtr_phy, unsigned int pre, 460 unsigned int voltage) 461 { 462 static const u8 voltage_swing[4][4] = { 463 { 0x2a, 0x27, 0x24, 0x20 }, 464 { 0x27, 0x23, 0x20, 0xff }, 465 { 0x24, 0x20, 0xff, 0xff }, 466 { 0xff, 0xff, 0xff, 0xff } 467 }; 468 static const u8 pre_emphasis[4][4] = { 469 { 0x02, 0x02, 0x02, 0x02 }, 470 { 0x01, 0x01, 0x01, 0xff }, 471 { 0x00, 0x00, 0xff, 0xff }, 472 { 0xff, 0xff, 0xff, 0xff } 473 }; 474 475 xpsgtr_write_phy(gtr_phy, L0_TXPMD_TM_48, voltage_swing[pre][voltage]); 476 xpsgtr_write_phy(gtr_phy, L0_TX_ANA_TM_18, pre_emphasis[pre][voltage]); 477 } 478 479 /* 480 * PHY Operations 481 */ 482 483 static bool xpsgtr_phy_init_required(struct xpsgtr_phy *gtr_phy) 484 { 485 /* 486 * As USB may save the snapshot of the states during hibernation, doing 487 * phy_init() will put the USB controller into reset, resulting in the 488 * losing of the saved snapshot. So try to avoid phy_init() for USB 489 * except when gtr_phy->skip_phy_init is false (this happens when FPD is 490 * shutdown during suspend or when gt lane is changed from current one) 491 */ 492 if (gtr_phy->protocol == ICM_PROTOCOL_USB && gtr_phy->skip_phy_init) 493 return false; 494 else 495 return true; 496 } 497 498 /* 499 * There is a functional issue in the GT. The TX termination resistance can be 500 * out of spec due to a issue in the calibration logic. This is the workaround 501 * to fix it, required for XCZU9EG silicon. 502 */ 503 static int xpsgtr_phy_tx_term_fix(struct xpsgtr_phy *gtr_phy) 504 { 505 struct xpsgtr_dev *gtr_dev = gtr_phy->dev; 506 u32 timeout = TIMEOUT_US; 507 u32 nsw; 508 509 /* Enabling Test Mode control for CMN Rest */ 510 xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_SET); 511 512 /* Set Test Mode reset */ 513 xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_EN); 514 515 xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG18, 0x00); 516 xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG19, L3_TM_OVERRIDE_NSW_CODE); 517 518 /* 519 * As a part of work around sequence for PMOS calibration fix, 520 * we need to configure any lane ICM_CFG to valid protocol. This 521 * will deassert the CMN_Resetn signal. 522 */ 523 xpsgtr_lane_set_protocol(gtr_phy); 524 525 /* Clear Test Mode reset */ 526 xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_SET); 527 528 dev_dbg(gtr_dev->dev, "calibrating...\n"); 529 530 do { 531 u32 reg = xpsgtr_read(gtr_dev, L3_CALIB_DONE_STATUS); 532 533 if ((reg & L3_CALIB_DONE) == L3_CALIB_DONE) 534 break; 535 536 if (!--timeout) { 537 dev_err(gtr_dev->dev, "calibration time out\n"); 538 return -ETIMEDOUT; 539 } 540 541 udelay(1); 542 } while (timeout > 0); 543 544 dev_dbg(gtr_dev->dev, "calibration done\n"); 545 546 /* Reading NMOS Register Code */ 547 nsw = xpsgtr_read(gtr_dev, L0_TXPMA_ST_3) & L0_DN_CALIB_CODE; 548 549 /* Set Test Mode reset */ 550 xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_EN); 551 552 /* Writing NMOS register values back [5:3] */ 553 xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG19, nsw >> L3_NSW_CALIB_SHIFT); 554 555 /* Writing NMOS register value [2:0] */ 556 xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG18, 557 ((nsw & L3_TM_CALIB_DIG19_NSW) << L3_NSW_SHIFT) | 558 (1 << L3_NSW_PIPE_SHIFT)); 559 560 /* Clear Test Mode reset */ 561 xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_SET); 562 563 return 0; 564 } 565 566 static int xpsgtr_phy_init(struct phy *phy) 567 { 568 struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy); 569 struct xpsgtr_dev *gtr_dev = gtr_phy->dev; 570 int ret = 0; 571 572 mutex_lock(>r_dev->gtr_mutex); 573 574 /* Skip initialization if not required. */ 575 if (!xpsgtr_phy_init_required(gtr_phy)) 576 goto out; 577 578 if (gtr_dev->tx_term_fix) { 579 ret = xpsgtr_phy_tx_term_fix(gtr_phy); 580 if (ret < 0) 581 goto out; 582 583 gtr_dev->tx_term_fix = false; 584 } 585 586 /* Enable coarse code saturation limiting logic. */ 587 xpsgtr_write_phy(gtr_phy, L0_TM_PLL_DIG_37, L0_TM_COARSE_CODE_LIMIT); 588 589 /* 590 * Configure the PLL, the lane protocol, and perform protocol-specific 591 * initialization. 592 */ 593 xpsgtr_configure_pll(gtr_phy); 594 xpsgtr_lane_set_protocol(gtr_phy); 595 596 switch (gtr_phy->protocol) { 597 case ICM_PROTOCOL_DP: 598 xpsgtr_phy_init_dp(gtr_phy); 599 break; 600 601 case ICM_PROTOCOL_SATA: 602 xpsgtr_phy_init_sata(gtr_phy); 603 break; 604 605 case ICM_PROTOCOL_SGMII: 606 xpsgtr_phy_init_sgmii(gtr_phy); 607 break; 608 } 609 610 out: 611 mutex_unlock(>r_dev->gtr_mutex); 612 return ret; 613 } 614 615 static int xpsgtr_phy_exit(struct phy *phy) 616 { 617 struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy); 618 619 gtr_phy->skip_phy_init = false; 620 621 return 0; 622 } 623 624 static int xpsgtr_phy_power_on(struct phy *phy) 625 { 626 struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy); 627 int ret = 0; 628 629 /* 630 * Wait for the PLL to lock. For DP, only wait on DP0 to avoid 631 * cumulating waits for both lanes. The user is expected to initialize 632 * lane 0 last. 633 */ 634 if (gtr_phy->protocol != ICM_PROTOCOL_DP || 635 gtr_phy->type == XPSGTR_TYPE_DP_0) 636 ret = xpsgtr_wait_pll_lock(phy); 637 638 return ret; 639 } 640 641 static int xpsgtr_phy_configure(struct phy *phy, union phy_configure_opts *opts) 642 { 643 struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy); 644 645 if (gtr_phy->protocol != ICM_PROTOCOL_DP) 646 return 0; 647 648 xpsgtr_phy_configure_dp(gtr_phy, opts->dp.pre[0], opts->dp.voltage[0]); 649 650 return 0; 651 } 652 653 static const struct phy_ops xpsgtr_phyops = { 654 .init = xpsgtr_phy_init, 655 .exit = xpsgtr_phy_exit, 656 .power_on = xpsgtr_phy_power_on, 657 .configure = xpsgtr_phy_configure, 658 .owner = THIS_MODULE, 659 }; 660 661 /* 662 * OF Xlate Support 663 */ 664 665 /* Set the lane type and protocol based on the PHY type and instance number. */ 666 static int xpsgtr_set_lane_type(struct xpsgtr_phy *gtr_phy, u8 phy_type, 667 unsigned int phy_instance) 668 { 669 unsigned int num_phy_types; 670 const int *phy_types; 671 672 switch (phy_type) { 673 case PHY_TYPE_SATA: { 674 static const int types[] = { 675 XPSGTR_TYPE_SATA_0, 676 XPSGTR_TYPE_SATA_1, 677 }; 678 679 phy_types = types; 680 num_phy_types = ARRAY_SIZE(types); 681 gtr_phy->protocol = ICM_PROTOCOL_SATA; 682 break; 683 } 684 case PHY_TYPE_USB3: { 685 static const int types[] = { 686 XPSGTR_TYPE_USB0, 687 XPSGTR_TYPE_USB1, 688 }; 689 690 phy_types = types; 691 num_phy_types = ARRAY_SIZE(types); 692 gtr_phy->protocol = ICM_PROTOCOL_USB; 693 break; 694 } 695 case PHY_TYPE_DP: { 696 static const int types[] = { 697 XPSGTR_TYPE_DP_0, 698 XPSGTR_TYPE_DP_1, 699 }; 700 701 phy_types = types; 702 num_phy_types = ARRAY_SIZE(types); 703 gtr_phy->protocol = ICM_PROTOCOL_DP; 704 break; 705 } 706 case PHY_TYPE_PCIE: { 707 static const int types[] = { 708 XPSGTR_TYPE_PCIE_0, 709 XPSGTR_TYPE_PCIE_1, 710 XPSGTR_TYPE_PCIE_2, 711 XPSGTR_TYPE_PCIE_3, 712 }; 713 714 phy_types = types; 715 num_phy_types = ARRAY_SIZE(types); 716 gtr_phy->protocol = ICM_PROTOCOL_PCIE; 717 break; 718 } 719 case PHY_TYPE_SGMII: { 720 static const int types[] = { 721 XPSGTR_TYPE_SGMII0, 722 XPSGTR_TYPE_SGMII1, 723 XPSGTR_TYPE_SGMII2, 724 XPSGTR_TYPE_SGMII3, 725 }; 726 727 phy_types = types; 728 num_phy_types = ARRAY_SIZE(types); 729 gtr_phy->protocol = ICM_PROTOCOL_SGMII; 730 break; 731 } 732 default: 733 return -EINVAL; 734 } 735 736 if (phy_instance >= num_phy_types) 737 return -EINVAL; 738 739 gtr_phy->type = phy_types[phy_instance]; 740 return 0; 741 } 742 743 /* 744 * Valid combinations of controllers and lanes (Interconnect Matrix). 745 */ 746 static const unsigned int icm_matrix[NUM_LANES][CONTROLLERS_PER_LANE] = { 747 { XPSGTR_TYPE_PCIE_0, XPSGTR_TYPE_SATA_0, XPSGTR_TYPE_USB0, 748 XPSGTR_TYPE_DP_1, XPSGTR_TYPE_SGMII0 }, 749 { XPSGTR_TYPE_PCIE_1, XPSGTR_TYPE_SATA_1, XPSGTR_TYPE_USB0, 750 XPSGTR_TYPE_DP_0, XPSGTR_TYPE_SGMII1 }, 751 { XPSGTR_TYPE_PCIE_2, XPSGTR_TYPE_SATA_0, XPSGTR_TYPE_USB0, 752 XPSGTR_TYPE_DP_1, XPSGTR_TYPE_SGMII2 }, 753 { XPSGTR_TYPE_PCIE_3, XPSGTR_TYPE_SATA_1, XPSGTR_TYPE_USB1, 754 XPSGTR_TYPE_DP_0, XPSGTR_TYPE_SGMII3 } 755 }; 756 757 /* Translate OF phandle and args to PHY instance. */ 758 static struct phy *xpsgtr_xlate(struct device *dev, 759 struct of_phandle_args *args) 760 { 761 struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev); 762 struct xpsgtr_phy *gtr_phy; 763 unsigned int phy_instance; 764 unsigned int phy_lane; 765 unsigned int phy_type; 766 unsigned int refclk; 767 unsigned int i; 768 int ret; 769 770 if (args->args_count != 4) { 771 dev_err(dev, "Invalid number of cells in 'phy' property\n"); 772 return ERR_PTR(-EINVAL); 773 } 774 775 /* 776 * Get the PHY parameters from the OF arguments and derive the lane 777 * type. 778 */ 779 phy_lane = args->args[0]; 780 if (phy_lane >= ARRAY_SIZE(gtr_dev->phys)) { 781 dev_err(dev, "Invalid lane number %u\n", phy_lane); 782 return ERR_PTR(-ENODEV); 783 } 784 785 gtr_phy = >r_dev->phys[phy_lane]; 786 phy_type = args->args[1]; 787 phy_instance = args->args[2]; 788 789 ret = xpsgtr_set_lane_type(gtr_phy, phy_type, phy_instance); 790 if (ret < 0) { 791 dev_err(gtr_dev->dev, "Invalid PHY type and/or instance\n"); 792 return ERR_PTR(ret); 793 } 794 795 refclk = args->args[3]; 796 if (refclk >= ARRAY_SIZE(gtr_dev->refclk_sscs) || 797 !gtr_dev->refclk_sscs[refclk]) { 798 dev_err(dev, "Invalid reference clock number %u\n", refclk); 799 return ERR_PTR(-EINVAL); 800 } 801 802 gtr_phy->refclk = refclk; 803 804 /* 805 * Ensure that the Interconnect Matrix is obeyed, i.e a given lane type 806 * is allowed to operate on the lane. 807 */ 808 for (i = 0; i < CONTROLLERS_PER_LANE; i++) { 809 if (icm_matrix[phy_lane][i] == gtr_phy->type) 810 return gtr_phy->phy; 811 } 812 813 return ERR_PTR(-EINVAL); 814 } 815 816 /* 817 * Power Management 818 */ 819 820 static int __maybe_unused xpsgtr_suspend(struct device *dev) 821 { 822 struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev); 823 unsigned int i; 824 825 /* Save the snapshot ICM_CFG registers. */ 826 gtr_dev->saved_icm_cfg0 = xpsgtr_read(gtr_dev, ICM_CFG0); 827 gtr_dev->saved_icm_cfg1 = xpsgtr_read(gtr_dev, ICM_CFG1); 828 829 for (i = 0; i < ARRAY_SIZE(gtr_dev->clk); i++) 830 clk_disable_unprepare(gtr_dev->clk[i]); 831 832 return 0; 833 } 834 835 static int __maybe_unused xpsgtr_resume(struct device *dev) 836 { 837 struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev); 838 unsigned int icm_cfg0, icm_cfg1; 839 unsigned int i; 840 bool skip_phy_init; 841 int err; 842 843 for (i = 0; i < ARRAY_SIZE(gtr_dev->clk); i++) { 844 err = clk_prepare_enable(gtr_dev->clk[i]); 845 if (err) 846 goto err_clk_put; 847 } 848 849 icm_cfg0 = xpsgtr_read(gtr_dev, ICM_CFG0); 850 icm_cfg1 = xpsgtr_read(gtr_dev, ICM_CFG1); 851 852 /* Return if no GT lanes got configured before suspend. */ 853 if (!gtr_dev->saved_icm_cfg0 && !gtr_dev->saved_icm_cfg1) 854 return 0; 855 856 /* Check if the ICM configurations changed after suspend. */ 857 if (icm_cfg0 == gtr_dev->saved_icm_cfg0 && 858 icm_cfg1 == gtr_dev->saved_icm_cfg1) 859 skip_phy_init = true; 860 else 861 skip_phy_init = false; 862 863 /* Update the skip_phy_init for all gtr_phy instances. */ 864 for (i = 0; i < ARRAY_SIZE(gtr_dev->phys); i++) 865 gtr_dev->phys[i].skip_phy_init = skip_phy_init; 866 867 return 0; 868 869 err_clk_put: 870 while (i--) 871 clk_disable_unprepare(gtr_dev->clk[i]); 872 873 return err; 874 } 875 876 static const struct dev_pm_ops xpsgtr_pm_ops = { 877 SET_SYSTEM_SLEEP_PM_OPS(xpsgtr_suspend, xpsgtr_resume) 878 }; 879 880 /* 881 * Probe & Platform Driver 882 */ 883 884 static int xpsgtr_get_ref_clocks(struct xpsgtr_dev *gtr_dev) 885 { 886 unsigned int refclk; 887 int ret; 888 889 for (refclk = 0; refclk < ARRAY_SIZE(gtr_dev->refclk_sscs); ++refclk) { 890 unsigned long rate; 891 unsigned int i; 892 struct clk *clk; 893 char name[8]; 894 895 snprintf(name, sizeof(name), "ref%u", refclk); 896 clk = devm_clk_get_optional(gtr_dev->dev, name); 897 if (IS_ERR(clk)) { 898 ret = dev_err_probe(gtr_dev->dev, PTR_ERR(clk), 899 "Failed to get reference clock %u\n", 900 refclk); 901 goto err_clk_put; 902 } 903 904 if (!clk) 905 continue; 906 907 ret = clk_prepare_enable(clk); 908 if (ret) 909 goto err_clk_put; 910 911 gtr_dev->clk[refclk] = clk; 912 913 /* 914 * Get the spread spectrum (SSC) settings for the reference 915 * clock rate. 916 */ 917 rate = clk_get_rate(clk); 918 919 for (i = 0 ; i < ARRAY_SIZE(ssc_lookup); i++) { 920 if (rate == ssc_lookup[i].refclk_rate) { 921 gtr_dev->refclk_sscs[refclk] = &ssc_lookup[i]; 922 break; 923 } 924 } 925 926 if (i == ARRAY_SIZE(ssc_lookup)) { 927 dev_err(gtr_dev->dev, 928 "Invalid rate %lu for reference clock %u\n", 929 rate, refclk); 930 ret = -EINVAL; 931 goto err_clk_put; 932 } 933 } 934 935 return 0; 936 937 err_clk_put: 938 while (refclk--) 939 clk_disable_unprepare(gtr_dev->clk[refclk]); 940 941 return ret; 942 } 943 944 static int xpsgtr_probe(struct platform_device *pdev) 945 { 946 struct device_node *np = pdev->dev.of_node; 947 struct xpsgtr_dev *gtr_dev; 948 struct phy_provider *provider; 949 unsigned int port; 950 unsigned int i; 951 int ret; 952 953 gtr_dev = devm_kzalloc(&pdev->dev, sizeof(*gtr_dev), GFP_KERNEL); 954 if (!gtr_dev) 955 return -ENOMEM; 956 957 gtr_dev->dev = &pdev->dev; 958 platform_set_drvdata(pdev, gtr_dev); 959 960 mutex_init(>r_dev->gtr_mutex); 961 962 if (of_device_is_compatible(np, "xlnx,zynqmp-psgtr")) 963 gtr_dev->tx_term_fix = 964 of_property_read_bool(np, "xlnx,tx-termination-fix"); 965 966 /* Acquire resources. */ 967 gtr_dev->serdes = devm_platform_ioremap_resource_byname(pdev, "serdes"); 968 if (IS_ERR(gtr_dev->serdes)) 969 return PTR_ERR(gtr_dev->serdes); 970 971 gtr_dev->siou = devm_platform_ioremap_resource_byname(pdev, "siou"); 972 if (IS_ERR(gtr_dev->siou)) 973 return PTR_ERR(gtr_dev->siou); 974 975 ret = xpsgtr_get_ref_clocks(gtr_dev); 976 if (ret) 977 return ret; 978 979 /* Create PHYs. */ 980 for (port = 0; port < ARRAY_SIZE(gtr_dev->phys); ++port) { 981 struct xpsgtr_phy *gtr_phy = >r_dev->phys[port]; 982 struct phy *phy; 983 984 gtr_phy->lane = port; 985 gtr_phy->dev = gtr_dev; 986 987 phy = devm_phy_create(&pdev->dev, np, &xpsgtr_phyops); 988 if (IS_ERR(phy)) { 989 dev_err(&pdev->dev, "failed to create PHY\n"); 990 ret = PTR_ERR(phy); 991 goto err_clk_put; 992 } 993 994 gtr_phy->phy = phy; 995 phy_set_drvdata(phy, gtr_phy); 996 } 997 998 /* Register the PHY provider. */ 999 provider = devm_of_phy_provider_register(&pdev->dev, xpsgtr_xlate); 1000 if (IS_ERR(provider)) { 1001 dev_err(&pdev->dev, "registering provider failed\n"); 1002 ret = PTR_ERR(provider); 1003 goto err_clk_put; 1004 } 1005 return 0; 1006 1007 err_clk_put: 1008 for (i = 0; i < ARRAY_SIZE(gtr_dev->clk); i++) 1009 clk_disable_unprepare(gtr_dev->clk[i]); 1010 1011 return ret; 1012 } 1013 1014 static const struct of_device_id xpsgtr_of_match[] = { 1015 { .compatible = "xlnx,zynqmp-psgtr", }, 1016 { .compatible = "xlnx,zynqmp-psgtr-v1.1", }, 1017 {}, 1018 }; 1019 MODULE_DEVICE_TABLE(of, xpsgtr_of_match); 1020 1021 static struct platform_driver xpsgtr_driver = { 1022 .probe = xpsgtr_probe, 1023 .driver = { 1024 .name = "xilinx-psgtr", 1025 .of_match_table = xpsgtr_of_match, 1026 .pm = &xpsgtr_pm_ops, 1027 }, 1028 }; 1029 1030 module_platform_driver(xpsgtr_driver); 1031 1032 MODULE_AUTHOR("Xilinx Inc."); 1033 MODULE_LICENSE("GPL v2"); 1034 MODULE_DESCRIPTION("Xilinx ZynqMP High speed Gigabit Transceiver"); 1035