xref: /linux/drivers/phy/ti/phy-omap-usb2.c (revision 7f71507851fc7764b36a3221839607d3a45c2025)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * omap-usb2.c - USB PHY, talking to USB controller on TI SoCs.
4  *
5  * Copyright (C) 2012-2020 Texas Instruments Incorporated - http://www.ti.com
6  * Author: Kishon Vijay Abraham I <kishon@ti.com>
7  */
8 
9 #include <linux/clk.h>
10 #include <linux/delay.h>
11 #include <linux/err.h>
12 #include <linux/io.h>
13 #include <linux/mfd/syscon.h>
14 #include <linux/module.h>
15 #include <linux/of.h>
16 #include <linux/of_platform.h>
17 #include <linux/phy/omap_control_phy.h>
18 #include <linux/phy/omap_usb.h>
19 #include <linux/phy/phy.h>
20 #include <linux/platform_device.h>
21 #include <linux/pm_runtime.h>
22 #include <linux/property.h>
23 #include <linux/regmap.h>
24 #include <linux/slab.h>
25 #include <linux/sys_soc.h>
26 #include <linux/usb/phy_companion.h>
27 
28 #define USB2PHY_ANA_CONFIG1		0x4c
29 #define USB2PHY_DISCON_BYP_LATCH	BIT(31)
30 
31 #define USB2PHY_CHRG_DET			0x14
32 #define USB2PHY_CHRG_DET_USE_CHG_DET_REG	BIT(29)
33 #define USB2PHY_CHRG_DET_DIS_CHG_DET		BIT(28)
34 
35 /* SoC Specific USB2_OTG register definitions */
36 #define AM654_USB2_OTG_PD		BIT(8)
37 #define AM654_USB2_VBUS_DET_EN		BIT(5)
38 #define AM654_USB2_VBUSVALID_DET_EN	BIT(4)
39 
40 #define OMAP_DEV_PHY_PD		BIT(0)
41 #define OMAP_USB2_PHY_PD	BIT(28)
42 
43 #define AM437X_USB2_PHY_PD		BIT(0)
44 #define AM437X_USB2_OTG_PD		BIT(1)
45 #define AM437X_USB2_OTGVDET_EN		BIT(19)
46 #define AM437X_USB2_OTGSESSEND_EN	BIT(20)
47 
48 /* Driver Flags */
49 #define OMAP_USB2_HAS_START_SRP			BIT(0)
50 #define OMAP_USB2_HAS_SET_VBUS			BIT(1)
51 #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT	BIT(2)
52 #define OMAP_USB2_DISABLE_CHRG_DET		BIT(3)
53 
54 struct omap_usb {
55 	struct usb_phy		phy;
56 	struct phy_companion	*comparator;
57 	void __iomem		*pll_ctrl_base;
58 	void __iomem		*phy_base;
59 	struct device		*dev;
60 	struct device		*control_dev;
61 	struct clk		*wkupclk;
62 	struct clk		*optclk;
63 	u8			flags;
64 	struct regmap		*syscon_phy_power; /* ctrl. reg. acces */
65 	unsigned int		power_reg; /* power reg. index within syscon */
66 	u32			mask;
67 	u32			power_on;
68 	u32			power_off;
69 };
70 
71 #define	phy_to_omapusb(x)	container_of((x), struct omap_usb, phy)
72 
73 struct usb_phy_data {
74 	const char *label;
75 	u8 flags;
76 	u32 mask;
77 	u32 power_on;
78 	u32 power_off;
79 };
80 
81 static inline u32 omap_usb_readl(void __iomem *addr, unsigned int offset)
82 {
83 	return __raw_readl(addr + offset);
84 }
85 
86 static inline void omap_usb_writel(void __iomem *addr, unsigned int offset,
87 				   u32 data)
88 {
89 	__raw_writel(data, addr + offset);
90 }
91 
92 /**
93  * omap_usb2_set_comparator() - links the comparator present in the system with this phy
94  *
95  * @comparator:  the companion phy(comparator) for this phy
96  *
97  * The phy companion driver should call this API passing the phy_companion
98  * filled with set_vbus and start_srp to be used by usb phy.
99  *
100  * For use by phy companion driver
101  */
102 int omap_usb2_set_comparator(struct phy_companion *comparator)
103 {
104 	struct omap_usb	*phy;
105 	struct usb_phy	*x = usb_get_phy(USB_PHY_TYPE_USB2);
106 
107 	if (IS_ERR(x))
108 		return -ENODEV;
109 
110 	phy = phy_to_omapusb(x);
111 	phy->comparator = comparator;
112 	return 0;
113 }
114 EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
115 
116 static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
117 {
118 	struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
119 
120 	if (!phy->comparator || !phy->comparator->set_vbus)
121 		return -ENODEV;
122 
123 	return phy->comparator->set_vbus(phy->comparator, enabled);
124 }
125 
126 static int omap_usb_start_srp(struct usb_otg *otg)
127 {
128 	struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
129 
130 	if (!phy->comparator || !phy->comparator->start_srp)
131 		return -ENODEV;
132 
133 	return phy->comparator->start_srp(phy->comparator);
134 }
135 
136 static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
137 {
138 	otg->host = host;
139 	if (!host)
140 		otg->state = OTG_STATE_UNDEFINED;
141 
142 	return 0;
143 }
144 
145 static int omap_usb_set_peripheral(struct usb_otg *otg,
146 				   struct usb_gadget *gadget)
147 {
148 	otg->gadget = gadget;
149 	if (!gadget)
150 		otg->state = OTG_STATE_UNDEFINED;
151 
152 	return 0;
153 }
154 
155 static int omap_usb_phy_power(struct omap_usb *phy, int on)
156 {
157 	u32 val;
158 	int ret;
159 
160 	if (!phy->syscon_phy_power) {
161 		omap_control_phy_power(phy->control_dev, on);
162 		return 0;
163 	}
164 
165 	if (on)
166 		val = phy->power_on;
167 	else
168 		val = phy->power_off;
169 
170 	ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
171 				 phy->mask, val);
172 	return ret;
173 }
174 
175 static int omap_usb_power_off(struct phy *x)
176 {
177 	struct omap_usb *phy = phy_get_drvdata(x);
178 
179 	return omap_usb_phy_power(phy, false);
180 }
181 
182 static int omap_usb_power_on(struct phy *x)
183 {
184 	struct omap_usb *phy = phy_get_drvdata(x);
185 
186 	return omap_usb_phy_power(phy, true);
187 }
188 
189 static int omap_usb2_disable_clocks(struct omap_usb *phy)
190 {
191 	clk_disable_unprepare(phy->wkupclk);
192 	if (!IS_ERR(phy->optclk))
193 		clk_disable_unprepare(phy->optclk);
194 
195 	return 0;
196 }
197 
198 static int omap_usb2_enable_clocks(struct omap_usb *phy)
199 {
200 	int ret;
201 
202 	ret = clk_prepare_enable(phy->wkupclk);
203 	if (ret < 0) {
204 		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
205 		goto err0;
206 	}
207 
208 	if (!IS_ERR(phy->optclk)) {
209 		ret = clk_prepare_enable(phy->optclk);
210 		if (ret < 0) {
211 			dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
212 			goto err1;
213 		}
214 	}
215 
216 	return 0;
217 
218 err1:
219 	clk_disable_unprepare(phy->wkupclk);
220 
221 err0:
222 	return ret;
223 }
224 
225 static int omap_usb_init(struct phy *x)
226 {
227 	struct omap_usb *phy = phy_get_drvdata(x);
228 	u32 val;
229 
230 	omap_usb2_enable_clocks(phy);
231 
232 	if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
233 		/*
234 		 *
235 		 * Reduce the sensitivity of internal PHY by enabling the
236 		 * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This
237 		 * resolves issues with certain devices which can otherwise
238 		 * be prone to false disconnects.
239 		 *
240 		 */
241 		val = omap_usb_readl(phy->phy_base, USB2PHY_ANA_CONFIG1);
242 		val |= USB2PHY_DISCON_BYP_LATCH;
243 		omap_usb_writel(phy->phy_base, USB2PHY_ANA_CONFIG1, val);
244 	}
245 
246 	if (phy->flags & OMAP_USB2_DISABLE_CHRG_DET) {
247 		val = omap_usb_readl(phy->phy_base, USB2PHY_CHRG_DET);
248 		val |= USB2PHY_CHRG_DET_USE_CHG_DET_REG |
249 		       USB2PHY_CHRG_DET_DIS_CHG_DET;
250 		omap_usb_writel(phy->phy_base, USB2PHY_CHRG_DET, val);
251 	}
252 
253 	return 0;
254 }
255 
256 static int omap_usb_exit(struct phy *x)
257 {
258 	struct omap_usb *phy = phy_get_drvdata(x);
259 
260 	return omap_usb2_disable_clocks(phy);
261 }
262 
263 static const struct phy_ops ops = {
264 	.init		= omap_usb_init,
265 	.exit		= omap_usb_exit,
266 	.power_on	= omap_usb_power_on,
267 	.power_off	= omap_usb_power_off,
268 	.owner		= THIS_MODULE,
269 };
270 
271 static const struct usb_phy_data omap_usb2_data = {
272 	.label = "omap_usb2",
273 	.flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
274 	.mask = OMAP_DEV_PHY_PD,
275 	.power_off = OMAP_DEV_PHY_PD,
276 };
277 
278 static const struct usb_phy_data omap5_usb2_data = {
279 	.label = "omap5_usb2",
280 	.flags = 0,
281 	.mask = OMAP_DEV_PHY_PD,
282 	.power_off = OMAP_DEV_PHY_PD,
283 };
284 
285 static const struct usb_phy_data dra7x_usb2_data = {
286 	.label = "dra7x_usb2",
287 	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
288 	.mask = OMAP_DEV_PHY_PD,
289 	.power_off = OMAP_DEV_PHY_PD,
290 };
291 
292 static const struct usb_phy_data dra7x_usb2_phy2_data = {
293 	.label = "dra7x_usb2_phy2",
294 	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
295 	.mask = OMAP_USB2_PHY_PD,
296 	.power_off = OMAP_USB2_PHY_PD,
297 };
298 
299 static const struct usb_phy_data am437x_usb2_data = {
300 	.label = "am437x_usb2",
301 	.flags =  0,
302 	.mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD |
303 		AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
304 	.power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
305 	.power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
306 };
307 
308 static const struct usb_phy_data am654_usb2_data = {
309 	.label = "am654_usb2",
310 	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
311 	.mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN |
312 		AM654_USB2_VBUSVALID_DET_EN,
313 	.power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN,
314 	.power_off = AM654_USB2_OTG_PD,
315 };
316 
317 static const struct of_device_id omap_usb2_id_table[] = {
318 	{
319 		.compatible = "ti,omap-usb2",
320 		.data = &omap_usb2_data,
321 	},
322 	{
323 		.compatible = "ti,omap5-usb2",
324 		.data = &omap5_usb2_data,
325 	},
326 	{
327 		.compatible = "ti,dra7x-usb2",
328 		.data = &dra7x_usb2_data,
329 	},
330 	{
331 		.compatible = "ti,dra7x-usb2-phy2",
332 		.data = &dra7x_usb2_phy2_data,
333 	},
334 	{
335 		.compatible = "ti,am437x-usb2",
336 		.data = &am437x_usb2_data,
337 	},
338 	{
339 		.compatible = "ti,am654-usb2",
340 		.data = &am654_usb2_data,
341 	},
342 	{},
343 };
344 MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
345 
346 static void omap_usb2_init_errata(struct omap_usb *phy)
347 {
348 	static const struct soc_device_attribute am65x_sr10_soc_devices[] = {
349 		{ .family = "AM65X", .revision = "SR1.0" },
350 		{ /* sentinel */ }
351 	};
352 
353 	/*
354 	 * Errata i2075: USB2PHY: USB2PHY Charger Detect is Enabled by
355 	 * Default Without VBUS Presence.
356 	 *
357 	 * AM654x SR1.0 has a silicon bug due to which D+ is pulled high after
358 	 * POR, which could cause enumeration failure with some USB hubs.
359 	 * Disabling the USB2_PHY Charger Detect function will put D+
360 	 * into the normal state.
361 	 */
362 	if (soc_device_match(am65x_sr10_soc_devices))
363 		phy->flags |= OMAP_USB2_DISABLE_CHRG_DET;
364 }
365 
366 static int omap_usb2_probe(struct platform_device *pdev)
367 {
368 	struct omap_usb	*phy;
369 	struct phy *generic_phy;
370 	struct phy_provider *phy_provider;
371 	struct usb_otg *otg;
372 	struct device_node *node = pdev->dev.of_node;
373 	struct device_node *control_node;
374 	struct platform_device *control_pdev;
375 	const struct usb_phy_data *phy_data;
376 
377 	phy_data = device_get_match_data(&pdev->dev);
378 	if (!phy_data)
379 		return -EINVAL;
380 
381 	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
382 	if (!phy)
383 		return -ENOMEM;
384 
385 	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
386 	if (!otg)
387 		return -ENOMEM;
388 
389 	phy->dev		= &pdev->dev;
390 
391 	phy->phy.dev		= phy->dev;
392 	phy->phy.label		= phy_data->label;
393 	phy->phy.otg		= otg;
394 	phy->phy.type		= USB_PHY_TYPE_USB2;
395 	phy->mask		= phy_data->mask;
396 	phy->power_on		= phy_data->power_on;
397 	phy->power_off		= phy_data->power_off;
398 	phy->flags		= phy_data->flags;
399 
400 	omap_usb2_init_errata(phy);
401 
402 	phy->phy_base = devm_platform_ioremap_resource(pdev, 0);
403 	if (IS_ERR(phy->phy_base))
404 		return PTR_ERR(phy->phy_base);
405 
406 	phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
407 								"syscon-phy-power");
408 	if (IS_ERR(phy->syscon_phy_power)) {
409 		dev_dbg(&pdev->dev,
410 			"can't get syscon-phy-power, using control device\n");
411 		phy->syscon_phy_power = NULL;
412 
413 		control_node = of_parse_phandle(node, "ctrl-module", 0);
414 		if (!control_node) {
415 			dev_err(&pdev->dev,
416 				"Failed to get control device phandle\n");
417 			return -EINVAL;
418 		}
419 
420 		control_pdev = of_find_device_by_node(control_node);
421 		if (!control_pdev) {
422 			dev_err(&pdev->dev, "Failed to get control device\n");
423 			return -EINVAL;
424 		}
425 		phy->control_dev = &control_pdev->dev;
426 	} else {
427 		if (of_property_read_u32_index(node,
428 					       "syscon-phy-power", 1,
429 					       &phy->power_reg)) {
430 			dev_err(&pdev->dev,
431 				"couldn't get power reg. offset\n");
432 			return -EINVAL;
433 		}
434 	}
435 
436 	phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
437 	if (IS_ERR(phy->wkupclk)) {
438 		if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER)
439 			return -EPROBE_DEFER;
440 
441 		dev_warn(&pdev->dev, "unable to get wkupclk %ld, trying old name\n",
442 			 PTR_ERR(phy->wkupclk));
443 		phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
444 
445 		if (IS_ERR(phy->wkupclk))
446 			return dev_err_probe(&pdev->dev, PTR_ERR(phy->wkupclk),
447 					     "unable to get usb_phy_cm_clk32k\n");
448 
449 		dev_warn(&pdev->dev,
450 			 "found usb_phy_cm_clk32k, please fix DTS\n");
451 	}
452 
453 	phy->optclk = devm_clk_get(phy->dev, "refclk");
454 	if (IS_ERR(phy->optclk)) {
455 		if (PTR_ERR(phy->optclk) == -EPROBE_DEFER)
456 			return -EPROBE_DEFER;
457 
458 		dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n");
459 		phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
460 
461 		if (IS_ERR(phy->optclk)) {
462 			if (PTR_ERR(phy->optclk) != -EPROBE_DEFER) {
463 				dev_dbg(&pdev->dev,
464 					"unable to get usb_otg_ss_refclk960m\n");
465 			}
466 		} else {
467 			dev_warn(&pdev->dev,
468 				 "found usb_otg_ss_refclk960m, please fix DTS\n");
469 		}
470 	}
471 
472 	otg->set_host = omap_usb_set_host;
473 	otg->set_peripheral = omap_usb_set_peripheral;
474 	if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
475 		otg->set_vbus = omap_usb_set_vbus;
476 	if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
477 		otg->start_srp = omap_usb_start_srp;
478 	otg->usb_phy = &phy->phy;
479 
480 	platform_set_drvdata(pdev, phy);
481 	pm_runtime_enable(phy->dev);
482 
483 	generic_phy = devm_phy_create(phy->dev, NULL, &ops);
484 	if (IS_ERR(generic_phy)) {
485 		pm_runtime_disable(phy->dev);
486 		return PTR_ERR(generic_phy);
487 	}
488 
489 	phy_set_drvdata(generic_phy, phy);
490 	omap_usb_power_off(generic_phy);
491 
492 	phy_provider = devm_of_phy_provider_register(phy->dev,
493 						     of_phy_simple_xlate);
494 	if (IS_ERR(phy_provider)) {
495 		pm_runtime_disable(phy->dev);
496 		return PTR_ERR(phy_provider);
497 	}
498 
499 	usb_add_phy_dev(&phy->phy);
500 
501 	return 0;
502 }
503 
504 static void omap_usb2_remove(struct platform_device *pdev)
505 {
506 	struct omap_usb	*phy = platform_get_drvdata(pdev);
507 
508 	usb_remove_phy(&phy->phy);
509 	pm_runtime_disable(phy->dev);
510 }
511 
512 static struct platform_driver omap_usb2_driver = {
513 	.probe		= omap_usb2_probe,
514 	.remove		= omap_usb2_remove,
515 	.driver		= {
516 		.name	= "omap-usb2",
517 		.of_match_table = omap_usb2_id_table,
518 	},
519 };
520 
521 module_platform_driver(omap_usb2_driver);
522 
523 MODULE_ALIAS("platform:omap_usb2");
524 MODULE_AUTHOR("Texas Instruments Inc.");
525 MODULE_DESCRIPTION("OMAP USB2 phy driver");
526 MODULE_LICENSE("GPL v2");
527