xref: /linux/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c (revision 1ac731c529cd4d6adbce134754b51ff7d822b145)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (c) 2017 Rockchip Electronics Co. Ltd.
4  *
5  * Author: Zheng Yang <zhengyang@rock-chips.com>
6  *         Heiko Stuebner <heiko@sntech.de>
7  */
8 
9 #include <linux/clk.h>
10 #include <linux/clk-provider.h>
11 #include <linux/delay.h>
12 #include <linux/io.h>
13 #include <linux/interrupt.h>
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/nvmem-consumer.h>
17 #include <linux/of.h>
18 #include <linux/of_device.h>
19 #include <linux/platform_device.h>
20 #include <linux/regmap.h>
21 #include <linux/phy/phy.h>
22 #include <linux/slab.h>
23 
24 #define UPDATE(x, h, l)		(((x) << (l)) & GENMASK((h), (l)))
25 
26 /* REG: 0x00 */
27 #define RK3228_PRE_PLL_REFCLK_SEL_PCLK			BIT(0)
28 /* REG: 0x01 */
29 #define RK3228_BYPASS_RXSENSE_EN			BIT(2)
30 #define RK3228_BYPASS_PWRON_EN				BIT(1)
31 #define RK3228_BYPASS_PLLPD_EN				BIT(0)
32 /* REG: 0x02 */
33 #define RK3228_BYPASS_PDATA_EN				BIT(4)
34 #define RK3228_PDATAEN_DISABLE				BIT(0)
35 /* REG: 0x03 */
36 #define RK3228_BYPASS_AUTO_TERM_RES_CAL			BIT(7)
37 #define RK3228_AUTO_TERM_RES_CAL_SPEED_14_8(x)		UPDATE(x, 6, 0)
38 /* REG: 0x04 */
39 #define RK3228_AUTO_TERM_RES_CAL_SPEED_7_0(x)		UPDATE(x, 7, 0)
40 /* REG: 0xaa */
41 #define RK3228_POST_PLL_CTRL_MANUAL			BIT(0)
42 /* REG: 0xe0 */
43 #define RK3228_POST_PLL_POWER_DOWN			BIT(5)
44 #define RK3228_PRE_PLL_POWER_DOWN			BIT(4)
45 #define RK3228_RXSENSE_CLK_CH_ENABLE			BIT(3)
46 #define RK3228_RXSENSE_DATA_CH2_ENABLE			BIT(2)
47 #define RK3228_RXSENSE_DATA_CH1_ENABLE			BIT(1)
48 #define RK3228_RXSENSE_DATA_CH0_ENABLE			BIT(0)
49 /* REG: 0xe1 */
50 #define RK3228_BANDGAP_ENABLE				BIT(4)
51 #define RK3228_TMDS_DRIVER_ENABLE			GENMASK(3, 0)
52 /* REG: 0xe2 */
53 #define RK3228_PRE_PLL_FB_DIV_8_MASK			BIT(7)
54 #define RK3228_PRE_PLL_FB_DIV_8(x)			UPDATE((x) >> 8, 7, 7)
55 #define RK3228_PCLK_VCO_DIV_5_MASK			BIT(5)
56 #define RK3228_PCLK_VCO_DIV_5(x)			UPDATE(x, 5, 5)
57 #define RK3228_PRE_PLL_PRE_DIV_MASK			GENMASK(4, 0)
58 #define RK3228_PRE_PLL_PRE_DIV(x)			UPDATE(x, 4, 0)
59 /* REG: 0xe3 */
60 #define RK3228_PRE_PLL_FB_DIV_7_0(x)			UPDATE(x, 7, 0)
61 /* REG: 0xe4 */
62 #define RK3228_PRE_PLL_PCLK_DIV_B_MASK			GENMASK(6, 5)
63 #define RK3228_PRE_PLL_PCLK_DIV_B_SHIFT			5
64 #define RK3228_PRE_PLL_PCLK_DIV_B(x)			UPDATE(x, 6, 5)
65 #define RK3228_PRE_PLL_PCLK_DIV_A_MASK			GENMASK(4, 0)
66 #define RK3228_PRE_PLL_PCLK_DIV_A(x)			UPDATE(x, 4, 0)
67 /* REG: 0xe5 */
68 #define RK3228_PRE_PLL_PCLK_DIV_C_MASK			GENMASK(6, 5)
69 #define RK3228_PRE_PLL_PCLK_DIV_C(x)			UPDATE(x, 6, 5)
70 #define RK3228_PRE_PLL_PCLK_DIV_D_MASK			GENMASK(4, 0)
71 #define RK3228_PRE_PLL_PCLK_DIV_D(x)			UPDATE(x, 4, 0)
72 /* REG: 0xe6 */
73 #define RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK		GENMASK(5, 4)
74 #define RK3228_PRE_PLL_TMDSCLK_DIV_C(x)			UPDATE(x, 5, 4)
75 #define RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK		GENMASK(3, 2)
76 #define RK3228_PRE_PLL_TMDSCLK_DIV_A(x)			UPDATE(x, 3, 2)
77 #define RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK		GENMASK(1, 0)
78 #define RK3228_PRE_PLL_TMDSCLK_DIV_B(x)			UPDATE(x, 1, 0)
79 /* REG: 0xe8 */
80 #define RK3228_PRE_PLL_LOCK_STATUS			BIT(0)
81 /* REG: 0xe9 */
82 #define RK3228_POST_PLL_POST_DIV_ENABLE			UPDATE(3, 7, 6)
83 #define RK3228_POST_PLL_PRE_DIV_MASK			GENMASK(4, 0)
84 #define RK3228_POST_PLL_PRE_DIV(x)			UPDATE(x, 4, 0)
85 /* REG: 0xea */
86 #define RK3228_POST_PLL_FB_DIV_7_0(x)			UPDATE(x, 7, 0)
87 /* REG: 0xeb */
88 #define RK3228_POST_PLL_FB_DIV_8_MASK			BIT(7)
89 #define RK3228_POST_PLL_FB_DIV_8(x)			UPDATE((x) >> 8, 7, 7)
90 #define RK3228_POST_PLL_POST_DIV_MASK			GENMASK(5, 4)
91 #define RK3228_POST_PLL_POST_DIV(x)			UPDATE(x, 5, 4)
92 #define RK3228_POST_PLL_LOCK_STATUS			BIT(0)
93 /* REG: 0xee */
94 #define RK3228_TMDS_CH_TA_ENABLE			GENMASK(7, 4)
95 /* REG: 0xef */
96 #define RK3228_TMDS_CLK_CH_TA(x)			UPDATE(x, 7, 6)
97 #define RK3228_TMDS_DATA_CH2_TA(x)			UPDATE(x, 5, 4)
98 #define RK3228_TMDS_DATA_CH1_TA(x)			UPDATE(x, 3, 2)
99 #define RK3228_TMDS_DATA_CH0_TA(x)			UPDATE(x, 1, 0)
100 /* REG: 0xf0 */
101 #define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS_MASK		GENMASK(5, 4)
102 #define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS(x)		UPDATE(x, 5, 4)
103 #define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS_MASK		GENMASK(3, 2)
104 #define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS(x)		UPDATE(x, 3, 2)
105 #define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS_MASK		GENMASK(1, 0)
106 #define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS(x)		UPDATE(x, 1, 0)
107 /* REG: 0xf1 */
108 #define RK3228_TMDS_CLK_CH_OUTPUT_SWING(x)		UPDATE(x, 7, 4)
109 #define RK3228_TMDS_DATA_CH2_OUTPUT_SWING(x)		UPDATE(x, 3, 0)
110 /* REG: 0xf2 */
111 #define RK3228_TMDS_DATA_CH1_OUTPUT_SWING(x)		UPDATE(x, 7, 4)
112 #define RK3228_TMDS_DATA_CH0_OUTPUT_SWING(x)		UPDATE(x, 3, 0)
113 
114 /* REG: 0x01 */
115 #define RK3328_BYPASS_RXSENSE_EN			BIT(2)
116 #define RK3328_BYPASS_POWERON_EN			BIT(1)
117 #define RK3328_BYPASS_PLLPD_EN				BIT(0)
118 /* REG: 0x02 */
119 #define RK3328_INT_POL_HIGH				BIT(7)
120 #define RK3328_BYPASS_PDATA_EN				BIT(4)
121 #define RK3328_PDATA_EN					BIT(0)
122 /* REG:0x05 */
123 #define RK3328_INT_TMDS_CLK(x)				UPDATE(x, 7, 4)
124 #define RK3328_INT_TMDS_D2(x)				UPDATE(x, 3, 0)
125 /* REG:0x07 */
126 #define RK3328_INT_TMDS_D1(x)				UPDATE(x, 7, 4)
127 #define RK3328_INT_TMDS_D0(x)				UPDATE(x, 3, 0)
128 /* for all RK3328_INT_TMDS_*, ESD_DET as defined in 0xc8-0xcb */
129 #define RK3328_INT_AGND_LOW_PULSE_LOCKED		BIT(3)
130 #define RK3328_INT_RXSENSE_LOW_PULSE_LOCKED		BIT(2)
131 #define RK3328_INT_VSS_AGND_ESD_DET			BIT(1)
132 #define RK3328_INT_AGND_VSS_ESD_DET			BIT(0)
133 /* REG: 0xa0 */
134 #define RK3328_PCLK_VCO_DIV_5_MASK			BIT(1)
135 #define RK3328_PCLK_VCO_DIV_5(x)			UPDATE(x, 1, 1)
136 #define RK3328_PRE_PLL_POWER_DOWN			BIT(0)
137 /* REG: 0xa1 */
138 #define RK3328_PRE_PLL_PRE_DIV_MASK			GENMASK(5, 0)
139 #define RK3328_PRE_PLL_PRE_DIV(x)			UPDATE(x, 5, 0)
140 /* REG: 0xa2 */
141 /* unset means center spread */
142 #define RK3328_SPREAD_SPECTRUM_MOD_DOWN			BIT(7)
143 #define RK3328_SPREAD_SPECTRUM_MOD_DISABLE		BIT(6)
144 #define RK3328_PRE_PLL_FRAC_DIV_DISABLE			UPDATE(3, 5, 4)
145 #define RK3328_PRE_PLL_FB_DIV_11_8_MASK			GENMASK(3, 0)
146 #define RK3328_PRE_PLL_FB_DIV_11_8(x)			UPDATE((x) >> 8, 3, 0)
147 /* REG: 0xa3 */
148 #define RK3328_PRE_PLL_FB_DIV_7_0(x)			UPDATE(x, 7, 0)
149 /* REG: 0xa4*/
150 #define RK3328_PRE_PLL_TMDSCLK_DIV_C_MASK		GENMASK(1, 0)
151 #define RK3328_PRE_PLL_TMDSCLK_DIV_C(x)			UPDATE(x, 1, 0)
152 #define RK3328_PRE_PLL_TMDSCLK_DIV_B_MASK		GENMASK(3, 2)
153 #define RK3328_PRE_PLL_TMDSCLK_DIV_B(x)			UPDATE(x, 3, 2)
154 #define RK3328_PRE_PLL_TMDSCLK_DIV_A_MASK		GENMASK(5, 4)
155 #define RK3328_PRE_PLL_TMDSCLK_DIV_A(x)			UPDATE(x, 5, 4)
156 /* REG: 0xa5 */
157 #define RK3328_PRE_PLL_PCLK_DIV_B_SHIFT			5
158 #define RK3328_PRE_PLL_PCLK_DIV_B_MASK			GENMASK(6, 5)
159 #define RK3328_PRE_PLL_PCLK_DIV_B(x)			UPDATE(x, 6, 5)
160 #define RK3328_PRE_PLL_PCLK_DIV_A_MASK			GENMASK(4, 0)
161 #define RK3328_PRE_PLL_PCLK_DIV_A(x)			UPDATE(x, 4, 0)
162 /* REG: 0xa6 */
163 #define RK3328_PRE_PLL_PCLK_DIV_C_SHIFT			5
164 #define RK3328_PRE_PLL_PCLK_DIV_C_MASK			GENMASK(6, 5)
165 #define RK3328_PRE_PLL_PCLK_DIV_C(x)			UPDATE(x, 6, 5)
166 #define RK3328_PRE_PLL_PCLK_DIV_D_MASK			GENMASK(4, 0)
167 #define RK3328_PRE_PLL_PCLK_DIV_D(x)			UPDATE(x, 4, 0)
168 /* REG: 0xa9 */
169 #define RK3328_PRE_PLL_LOCK_STATUS			BIT(0)
170 /* REG: 0xaa */
171 #define RK3328_POST_PLL_POST_DIV_ENABLE			GENMASK(3, 2)
172 #define RK3328_POST_PLL_REFCLK_SEL_TMDS			BIT(1)
173 #define RK3328_POST_PLL_POWER_DOWN			BIT(0)
174 /* REG:0xab */
175 #define RK3328_POST_PLL_FB_DIV_8(x)			UPDATE((x) >> 8, 7, 7)
176 #define RK3328_POST_PLL_PRE_DIV(x)			UPDATE(x, 4, 0)
177 /* REG: 0xac */
178 #define RK3328_POST_PLL_FB_DIV_7_0(x)			UPDATE(x, 7, 0)
179 /* REG: 0xad */
180 #define RK3328_POST_PLL_POST_DIV_MASK			GENMASK(1, 0)
181 #define RK3328_POST_PLL_POST_DIV_2			0x0
182 #define RK3328_POST_PLL_POST_DIV_4			0x1
183 #define RK3328_POST_PLL_POST_DIV_8			0x3
184 /* REG: 0xaf */
185 #define RK3328_POST_PLL_LOCK_STATUS			BIT(0)
186 /* REG: 0xb0 */
187 #define RK3328_BANDGAP_ENABLE				BIT(2)
188 /* REG: 0xb2 */
189 #define RK3328_TMDS_CLK_DRIVER_EN			BIT(3)
190 #define RK3328_TMDS_D2_DRIVER_EN			BIT(2)
191 #define RK3328_TMDS_D1_DRIVER_EN			BIT(1)
192 #define RK3328_TMDS_D0_DRIVER_EN			BIT(0)
193 #define RK3328_TMDS_DRIVER_ENABLE		(RK3328_TMDS_CLK_DRIVER_EN | \
194 						RK3328_TMDS_D2_DRIVER_EN | \
195 						RK3328_TMDS_D1_DRIVER_EN | \
196 						RK3328_TMDS_D0_DRIVER_EN)
197 /* REG:0xc5 */
198 #define RK3328_BYPASS_TERM_RESISTOR_CALIB		BIT(7)
199 #define RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(x)	UPDATE((x) >> 8, 6, 0)
200 /* REG:0xc6 */
201 #define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x)		UPDATE(x, 7, 0)
202 /* REG:0xc7 */
203 #define RK3328_TERM_RESISTOR_50				UPDATE(0, 2, 1)
204 #define RK3328_TERM_RESISTOR_62_5			UPDATE(1, 2, 1)
205 #define RK3328_TERM_RESISTOR_75				UPDATE(2, 2, 1)
206 #define RK3328_TERM_RESISTOR_100			UPDATE(3, 2, 1)
207 /* REG 0xc8 - 0xcb */
208 #define RK3328_ESD_DETECT_MASK				GENMASK(7, 6)
209 #define RK3328_ESD_DETECT_340MV				(0x0 << 6)
210 #define RK3328_ESD_DETECT_280MV				(0x1 << 6)
211 #define RK3328_ESD_DETECT_260MV				(0x2 << 6)
212 #define RK3328_ESD_DETECT_240MV				(0x3 << 6)
213 /* resistors can be used in parallel */
214 #define RK3328_TMDS_TERM_RESIST_MASK			GENMASK(5, 0)
215 #define RK3328_TMDS_TERM_RESIST_75			BIT(5)
216 #define RK3328_TMDS_TERM_RESIST_150			BIT(4)
217 #define RK3328_TMDS_TERM_RESIST_300			BIT(3)
218 #define RK3328_TMDS_TERM_RESIST_600			BIT(2)
219 #define RK3328_TMDS_TERM_RESIST_1000			BIT(1)
220 #define RK3328_TMDS_TERM_RESIST_2000			BIT(0)
221 /* REG: 0xd1 */
222 #define RK3328_PRE_PLL_FRAC_DIV_23_16(x)		UPDATE((x) >> 16, 7, 0)
223 /* REG: 0xd2 */
224 #define RK3328_PRE_PLL_FRAC_DIV_15_8(x)			UPDATE((x) >> 8, 7, 0)
225 /* REG: 0xd3 */
226 #define RK3328_PRE_PLL_FRAC_DIV_7_0(x)			UPDATE(x, 7, 0)
227 
228 struct inno_hdmi_phy_drv_data;
229 
230 struct inno_hdmi_phy {
231 	struct device *dev;
232 	struct regmap *regmap;
233 	int irq;
234 
235 	struct phy *phy;
236 	struct clk *sysclk;
237 	struct clk *refoclk;
238 	struct clk *refpclk;
239 
240 	/* platform data */
241 	const struct inno_hdmi_phy_drv_data *plat_data;
242 	int chip_version;
243 
244 	/* clk provider */
245 	struct clk_hw hw;
246 	struct clk *phyclk;
247 	unsigned long pixclock;
248 };
249 
250 struct pre_pll_config {
251 	unsigned long pixclock;
252 	unsigned long tmdsclock;
253 	u8 prediv;
254 	u16 fbdiv;
255 	u8 tmds_div_a;
256 	u8 tmds_div_b;
257 	u8 tmds_div_c;
258 	u8 pclk_div_a;
259 	u8 pclk_div_b;
260 	u8 pclk_div_c;
261 	u8 pclk_div_d;
262 	u8 vco_div_5_en;
263 	u32 fracdiv;
264 };
265 
266 struct post_pll_config {
267 	unsigned long tmdsclock;
268 	u8 prediv;
269 	u16 fbdiv;
270 	u8 postdiv;
271 	u8 version;
272 };
273 
274 struct phy_config {
275 	unsigned long	tmdsclock;
276 	u8		regs[14];
277 };
278 
279 struct inno_hdmi_phy_ops {
280 	int (*init)(struct inno_hdmi_phy *inno);
281 	int (*power_on)(struct inno_hdmi_phy *inno,
282 			const struct post_pll_config *cfg,
283 			const struct phy_config *phy_cfg);
284 	void (*power_off)(struct inno_hdmi_phy *inno);
285 };
286 
287 struct inno_hdmi_phy_drv_data {
288 	const struct inno_hdmi_phy_ops	*ops;
289 	const struct clk_ops		*clk_ops;
290 	const struct phy_config		*phy_cfg_table;
291 };
292 
293 static const struct pre_pll_config pre_pll_cfg_table[] = {
294 	{ 27000000,  27000000, 1,  90, 3, 2, 2, 10, 3, 3, 4, 0, 0},
295 	{ 27000000,  33750000, 1,  90, 1, 3, 3, 10, 3, 3, 4, 0, 0},
296 	{ 40000000,  40000000, 1,  80, 2, 2, 2, 12, 2, 2, 2, 0, 0},
297 	{ 59341000,  59341000, 1,  98, 3, 1, 2,  1, 3, 3, 4, 0, 0xE6AE6B},
298 	{ 59400000,  59400000, 1,  99, 3, 1, 1,  1, 3, 3, 4, 0, 0},
299 	{ 59341000,  74176250, 1,  98, 0, 3, 3,  1, 3, 3, 4, 0, 0xE6AE6B},
300 	{ 59400000,  74250000, 1,  99, 1, 2, 2,  1, 3, 3, 4, 0, 0},
301 	{ 74176000,  74176000, 1,  98, 1, 2, 2,  1, 2, 3, 4, 0, 0xE6AE6B},
302 	{ 74250000,  74250000, 1,  99, 1, 2, 2,  1, 2, 3, 4, 0, 0},
303 	{ 74176000,  92720000, 4, 494, 1, 2, 2,  1, 3, 3, 4, 0, 0x816817},
304 	{ 74250000,  92812500, 4, 495, 1, 2, 2,  1, 3, 3, 4, 0, 0},
305 	{148352000, 148352000, 1,  98, 1, 1, 1,  1, 2, 2, 2, 0, 0xE6AE6B},
306 	{148500000, 148500000, 1,  99, 1, 1, 1,  1, 2, 2, 2, 0, 0},
307 	{148352000, 185440000, 4, 494, 0, 2, 2,  1, 3, 2, 2, 0, 0x816817},
308 	{148500000, 185625000, 4, 495, 0, 2, 2,  1, 3, 2, 2, 0, 0},
309 	{296703000, 296703000, 1,  98, 0, 1, 1,  1, 0, 2, 2, 0, 0xE6AE6B},
310 	{297000000, 297000000, 1,  99, 0, 1, 1,  1, 0, 2, 2, 0, 0},
311 	{296703000, 370878750, 4, 494, 1, 2, 0,  1, 3, 1, 1, 0, 0x816817},
312 	{297000000, 371250000, 4, 495, 1, 2, 0,  1, 3, 1, 1, 0, 0},
313 	{593407000, 296703500, 1,  98, 0, 1, 1,  1, 0, 2, 1, 0, 0xE6AE6B},
314 	{594000000, 297000000, 1,  99, 0, 1, 1,  1, 0, 2, 1, 0, 0},
315 	{593407000, 370879375, 4, 494, 1, 2, 0,  1, 3, 1, 1, 1, 0x816817},
316 	{594000000, 371250000, 4, 495, 1, 2, 0,  1, 3, 1, 1, 1, 0},
317 	{593407000, 593407000, 1,  98, 0, 2, 0,  1, 0, 1, 1, 0, 0xE6AE6B},
318 	{594000000, 594000000, 1,  99, 0, 2, 0,  1, 0, 1, 1, 0, 0},
319 	{ /* sentinel */ }
320 };
321 
322 static const struct post_pll_config post_pll_cfg_table[] = {
323 	{33750000,  1, 40, 8, 1},
324 	{33750000,  1, 80, 8, 2},
325 	{74250000,  1, 40, 8, 1},
326 	{74250000, 18, 80, 8, 2},
327 	{148500000, 2, 40, 4, 3},
328 	{297000000, 4, 40, 2, 3},
329 	{594000000, 8, 40, 1, 3},
330 	{ /* sentinel */ }
331 };
332 
333 /* phy tuning values for an undocumented set of registers */
334 static const struct phy_config rk3228_phy_cfg[] = {
335 	{	165000000, {
336 			0xaa, 0x00, 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00,
337 			0x00, 0x00, 0x00, 0x00, 0x00,
338 		},
339 	}, {
340 		340000000, {
341 			0xaa, 0x15, 0x6a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00,
342 			0x00, 0x00, 0x00, 0x00, 0x00,
343 		},
344 	}, {
345 		594000000, {
346 			0xaa, 0x15, 0x7a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00,
347 			0x00, 0x00, 0x00, 0x00, 0x00,
348 		},
349 	}, { /* sentinel */ },
350 };
351 
352 /* phy tuning values for an undocumented set of registers */
353 static const struct phy_config rk3328_phy_cfg[] = {
354 	{	165000000, {
355 			0x07, 0x0a, 0x0a, 0x0a, 0x00, 0x00, 0x08, 0x08, 0x08,
356 			0x00, 0xac, 0xcc, 0xcc, 0xcc,
357 		},
358 	}, {
359 		340000000, {
360 			0x0b, 0x0d, 0x0d, 0x0d, 0x07, 0x15, 0x08, 0x08, 0x08,
361 			0x3f, 0xac, 0xcc, 0xcd, 0xdd,
362 		},
363 	}, {
364 		594000000, {
365 			0x10, 0x1a, 0x1a, 0x1a, 0x07, 0x15, 0x08, 0x08, 0x08,
366 			0x00, 0xac, 0xcc, 0xcc, 0xcc,
367 		},
368 	}, { /* sentinel */ },
369 };
370 
371 static inline struct inno_hdmi_phy *to_inno_hdmi_phy(struct clk_hw *hw)
372 {
373 	return container_of(hw, struct inno_hdmi_phy, hw);
374 }
375 
376 /*
377  * The register description of the IP block does not use any distinct names
378  * but instead the databook simply numbers the registers in one-increments.
379  * As the registers are obviously 32bit sized, the inno_* functions
380  * translate the databook register names to the actual registers addresses.
381  */
382 static inline void inno_write(struct inno_hdmi_phy *inno, u32 reg, u8 val)
383 {
384 	regmap_write(inno->regmap, reg * 4, val);
385 }
386 
387 static inline u8 inno_read(struct inno_hdmi_phy *inno, u32 reg)
388 {
389 	u32 val;
390 
391 	regmap_read(inno->regmap, reg * 4, &val);
392 
393 	return val;
394 }
395 
396 static inline void inno_update_bits(struct inno_hdmi_phy *inno, u8 reg,
397 				    u8 mask, u8 val)
398 {
399 	regmap_update_bits(inno->regmap, reg * 4, mask, val);
400 }
401 
402 #define inno_poll(inno, reg, val, cond, sleep_us, timeout_us) \
403 	regmap_read_poll_timeout((inno)->regmap, (reg) * 4, val, cond, \
404 				 sleep_us, timeout_us)
405 
406 static unsigned long inno_hdmi_phy_get_tmdsclk(struct inno_hdmi_phy *inno,
407 					       unsigned long rate)
408 {
409 	int bus_width = phy_get_bus_width(inno->phy);
410 
411 	switch (bus_width) {
412 	case 4:
413 	case 5:
414 	case 6:
415 	case 10:
416 	case 12:
417 	case 16:
418 		return (u64)rate * bus_width / 8;
419 	default:
420 		return rate;
421 	}
422 }
423 
424 static irqreturn_t inno_hdmi_phy_rk3328_hardirq(int irq, void *dev_id)
425 {
426 	struct inno_hdmi_phy *inno = dev_id;
427 	int intr_stat1, intr_stat2, intr_stat3;
428 
429 	intr_stat1 = inno_read(inno, 0x04);
430 	intr_stat2 = inno_read(inno, 0x06);
431 	intr_stat3 = inno_read(inno, 0x08);
432 
433 	if (intr_stat1)
434 		inno_write(inno, 0x04, intr_stat1);
435 	if (intr_stat2)
436 		inno_write(inno, 0x06, intr_stat2);
437 	if (intr_stat3)
438 		inno_write(inno, 0x08, intr_stat3);
439 
440 	if (intr_stat1 || intr_stat2 || intr_stat3)
441 		return IRQ_WAKE_THREAD;
442 
443 	return IRQ_HANDLED;
444 }
445 
446 static irqreturn_t inno_hdmi_phy_rk3328_irq(int irq, void *dev_id)
447 {
448 	struct inno_hdmi_phy *inno = dev_id;
449 
450 	inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0);
451 	usleep_range(10, 20);
452 	inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN);
453 
454 	return IRQ_HANDLED;
455 }
456 
457 static int inno_hdmi_phy_power_on(struct phy *phy)
458 {
459 	struct inno_hdmi_phy *inno = phy_get_drvdata(phy);
460 	const struct post_pll_config *cfg = post_pll_cfg_table;
461 	const struct phy_config *phy_cfg = inno->plat_data->phy_cfg_table;
462 	unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno,
463 							    inno->pixclock);
464 	int ret;
465 
466 	if (!tmdsclock) {
467 		dev_err(inno->dev, "TMDS clock is zero!\n");
468 		return -EINVAL;
469 	}
470 
471 	if (!inno->plat_data->ops->power_on)
472 		return -EINVAL;
473 
474 	for (; cfg->tmdsclock != 0; cfg++)
475 		if (tmdsclock <= cfg->tmdsclock &&
476 		    cfg->version & inno->chip_version)
477 			break;
478 
479 	for (; phy_cfg->tmdsclock != 0; phy_cfg++)
480 		if (tmdsclock <= phy_cfg->tmdsclock)
481 			break;
482 
483 	if (cfg->tmdsclock == 0 || phy_cfg->tmdsclock == 0)
484 		return -EINVAL;
485 
486 	dev_dbg(inno->dev, "Inno HDMI PHY Power On\n");
487 
488 	ret = clk_prepare_enable(inno->phyclk);
489 	if (ret)
490 		return ret;
491 
492 	ret = inno->plat_data->ops->power_on(inno, cfg, phy_cfg);
493 	if (ret) {
494 		clk_disable_unprepare(inno->phyclk);
495 		return ret;
496 	}
497 
498 	return 0;
499 }
500 
501 static int inno_hdmi_phy_power_off(struct phy *phy)
502 {
503 	struct inno_hdmi_phy *inno = phy_get_drvdata(phy);
504 
505 	if (!inno->plat_data->ops->power_off)
506 		return -EINVAL;
507 
508 	inno->plat_data->ops->power_off(inno);
509 
510 	clk_disable_unprepare(inno->phyclk);
511 
512 	dev_dbg(inno->dev, "Inno HDMI PHY Power Off\n");
513 
514 	return 0;
515 }
516 
517 static const struct phy_ops inno_hdmi_phy_ops = {
518 	.owner = THIS_MODULE,
519 	.power_on = inno_hdmi_phy_power_on,
520 	.power_off = inno_hdmi_phy_power_off,
521 };
522 
523 static const
524 struct pre_pll_config *inno_hdmi_phy_get_pre_pll_cfg(struct inno_hdmi_phy *inno,
525 						     unsigned long rate)
526 {
527 	const struct pre_pll_config *cfg = pre_pll_cfg_table;
528 	unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
529 
530 	for (; cfg->pixclock != 0; cfg++)
531 		if (cfg->pixclock == rate && cfg->tmdsclock == tmdsclock)
532 			break;
533 
534 	if (cfg->pixclock == 0)
535 		return ERR_PTR(-EINVAL);
536 
537 	return cfg;
538 }
539 
540 static int inno_hdmi_phy_rk3228_clk_is_prepared(struct clk_hw *hw)
541 {
542 	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
543 	u8 status;
544 
545 	status = inno_read(inno, 0xe0) & RK3228_PRE_PLL_POWER_DOWN;
546 	return status ? 0 : 1;
547 }
548 
549 static int inno_hdmi_phy_rk3228_clk_prepare(struct clk_hw *hw)
550 {
551 	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
552 
553 	inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0);
554 	return 0;
555 }
556 
557 static void inno_hdmi_phy_rk3228_clk_unprepare(struct clk_hw *hw)
558 {
559 	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
560 
561 	inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN,
562 			 RK3228_PRE_PLL_POWER_DOWN);
563 }
564 
565 static
566 unsigned long inno_hdmi_phy_rk3228_clk_recalc_rate(struct clk_hw *hw,
567 						   unsigned long parent_rate)
568 {
569 	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
570 	u8 nd, no_a, no_b, no_d;
571 	u64 vco;
572 	u16 nf;
573 
574 	nd = inno_read(inno, 0xe2) & RK3228_PRE_PLL_PRE_DIV_MASK;
575 	nf = (inno_read(inno, 0xe2) & RK3228_PRE_PLL_FB_DIV_8_MASK) << 1;
576 	nf |= inno_read(inno, 0xe3);
577 	vco = parent_rate * nf;
578 
579 	if (inno_read(inno, 0xe2) & RK3228_PCLK_VCO_DIV_5_MASK) {
580 		do_div(vco, nd * 5);
581 	} else {
582 		no_a = inno_read(inno, 0xe4) & RK3228_PRE_PLL_PCLK_DIV_A_MASK;
583 		if (!no_a)
584 			no_a = 1;
585 		no_b = inno_read(inno, 0xe4) & RK3228_PRE_PLL_PCLK_DIV_B_MASK;
586 		no_b >>= RK3228_PRE_PLL_PCLK_DIV_B_SHIFT;
587 		no_b += 2;
588 		no_d = inno_read(inno, 0xe5) & RK3228_PRE_PLL_PCLK_DIV_D_MASK;
589 
590 		do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
591 	}
592 
593 	inno->pixclock = vco;
594 
595 	dev_dbg(inno->dev, "%s rate %lu\n", __func__, inno->pixclock);
596 
597 	return vco;
598 }
599 
600 static long inno_hdmi_phy_rk3228_clk_round_rate(struct clk_hw *hw,
601 						unsigned long rate,
602 						unsigned long *parent_rate)
603 {
604 	const struct pre_pll_config *cfg = pre_pll_cfg_table;
605 
606 	rate = (rate / 1000) * 1000;
607 
608 	for (; cfg->pixclock != 0; cfg++)
609 		if (cfg->pixclock == rate && !cfg->fracdiv)
610 			break;
611 
612 	if (cfg->pixclock == 0)
613 		return -EINVAL;
614 
615 	return cfg->pixclock;
616 }
617 
618 static int inno_hdmi_phy_rk3228_clk_set_rate(struct clk_hw *hw,
619 					     unsigned long rate,
620 					     unsigned long parent_rate)
621 {
622 	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
623 	const struct pre_pll_config *cfg;
624 	unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
625 	u32 v;
626 	int ret;
627 
628 	dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n",
629 		__func__, rate, tmdsclock);
630 
631 	cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate);
632 	if (IS_ERR(cfg))
633 		return PTR_ERR(cfg);
634 
635 	/* Power down PRE-PLL */
636 	inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN,
637 			 RK3228_PRE_PLL_POWER_DOWN);
638 
639 	inno_update_bits(inno, 0xe2, RK3228_PRE_PLL_FB_DIV_8_MASK |
640 			 RK3228_PCLK_VCO_DIV_5_MASK |
641 			 RK3228_PRE_PLL_PRE_DIV_MASK,
642 			 RK3228_PRE_PLL_FB_DIV_8(cfg->fbdiv) |
643 			 RK3228_PCLK_VCO_DIV_5(cfg->vco_div_5_en) |
644 			 RK3228_PRE_PLL_PRE_DIV(cfg->prediv));
645 	inno_write(inno, 0xe3, RK3228_PRE_PLL_FB_DIV_7_0(cfg->fbdiv));
646 	inno_update_bits(inno, 0xe4, RK3228_PRE_PLL_PCLK_DIV_B_MASK |
647 			 RK3228_PRE_PLL_PCLK_DIV_A_MASK,
648 			 RK3228_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b) |
649 			 RK3228_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a));
650 	inno_update_bits(inno, 0xe5, RK3228_PRE_PLL_PCLK_DIV_C_MASK |
651 			 RK3228_PRE_PLL_PCLK_DIV_D_MASK,
652 			 RK3228_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) |
653 			 RK3228_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d));
654 	inno_update_bits(inno, 0xe6, RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK |
655 			 RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK |
656 			 RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK,
657 			 RK3228_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) |
658 			 RK3228_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) |
659 			 RK3228_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b));
660 
661 	/* Power up PRE-PLL */
662 	inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0);
663 
664 	/* Wait for Pre-PLL lock */
665 	ret = inno_poll(inno, 0xe8, v, v & RK3228_PRE_PLL_LOCK_STATUS,
666 			100, 100000);
667 	if (ret) {
668 		dev_err(inno->dev, "Pre-PLL locking failed\n");
669 		return ret;
670 	}
671 
672 	inno->pixclock = rate;
673 
674 	return 0;
675 }
676 
677 static const struct clk_ops inno_hdmi_phy_rk3228_clk_ops = {
678 	.prepare = inno_hdmi_phy_rk3228_clk_prepare,
679 	.unprepare = inno_hdmi_phy_rk3228_clk_unprepare,
680 	.is_prepared = inno_hdmi_phy_rk3228_clk_is_prepared,
681 	.recalc_rate = inno_hdmi_phy_rk3228_clk_recalc_rate,
682 	.round_rate = inno_hdmi_phy_rk3228_clk_round_rate,
683 	.set_rate = inno_hdmi_phy_rk3228_clk_set_rate,
684 };
685 
686 static int inno_hdmi_phy_rk3328_clk_is_prepared(struct clk_hw *hw)
687 {
688 	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
689 	u8 status;
690 
691 	status = inno_read(inno, 0xa0) & RK3328_PRE_PLL_POWER_DOWN;
692 	return status ? 0 : 1;
693 }
694 
695 static int inno_hdmi_phy_rk3328_clk_prepare(struct clk_hw *hw)
696 {
697 	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
698 
699 	inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0);
700 	return 0;
701 }
702 
703 static void inno_hdmi_phy_rk3328_clk_unprepare(struct clk_hw *hw)
704 {
705 	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
706 
707 	inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN,
708 			 RK3328_PRE_PLL_POWER_DOWN);
709 }
710 
711 static
712 unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw,
713 						   unsigned long parent_rate)
714 {
715 	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
716 	unsigned long frac;
717 	u8 nd, no_a, no_b, no_c, no_d;
718 	u64 vco;
719 	u16 nf;
720 
721 	nd = inno_read(inno, 0xa1) & RK3328_PRE_PLL_PRE_DIV_MASK;
722 	nf = ((inno_read(inno, 0xa2) & RK3328_PRE_PLL_FB_DIV_11_8_MASK) << 8);
723 	nf |= inno_read(inno, 0xa3);
724 	vco = parent_rate * nf;
725 
726 	if (!(inno_read(inno, 0xa2) & RK3328_PRE_PLL_FRAC_DIV_DISABLE)) {
727 		frac = inno_read(inno, 0xd3) |
728 		       (inno_read(inno, 0xd2) << 8) |
729 		       (inno_read(inno, 0xd1) << 16);
730 		vco += DIV_ROUND_CLOSEST(parent_rate * frac, (1 << 24));
731 	}
732 
733 	if (inno_read(inno, 0xa0) & RK3328_PCLK_VCO_DIV_5_MASK) {
734 		do_div(vco, nd * 5);
735 	} else {
736 		no_a = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_A_MASK;
737 		no_b = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_B_MASK;
738 		no_b >>= RK3328_PRE_PLL_PCLK_DIV_B_SHIFT;
739 		no_b += 2;
740 		no_c = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_C_MASK;
741 		no_c >>= RK3328_PRE_PLL_PCLK_DIV_C_SHIFT;
742 		no_c = 1 << no_c;
743 		no_d = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_D_MASK;
744 
745 		do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
746 	}
747 
748 	inno->pixclock = vco;
749 	dev_dbg(inno->dev, "%s rate %lu\n", __func__, inno->pixclock);
750 
751 	return vco;
752 }
753 
754 static long inno_hdmi_phy_rk3328_clk_round_rate(struct clk_hw *hw,
755 						unsigned long rate,
756 						unsigned long *parent_rate)
757 {
758 	const struct pre_pll_config *cfg = pre_pll_cfg_table;
759 
760 	rate = (rate / 1000) * 1000;
761 
762 	for (; cfg->pixclock != 0; cfg++)
763 		if (cfg->pixclock == rate)
764 			break;
765 
766 	if (cfg->pixclock == 0)
767 		return -EINVAL;
768 
769 	return cfg->pixclock;
770 }
771 
772 static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw,
773 					     unsigned long rate,
774 					     unsigned long parent_rate)
775 {
776 	struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
777 	const struct pre_pll_config *cfg;
778 	unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
779 	u32 val;
780 	int ret;
781 
782 	dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n",
783 		__func__, rate, tmdsclock);
784 
785 	cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate);
786 	if (IS_ERR(cfg))
787 		return PTR_ERR(cfg);
788 
789 	inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN,
790 			 RK3328_PRE_PLL_POWER_DOWN);
791 
792 	/* Configure pre-pll */
793 	inno_update_bits(inno, 0xa0, RK3228_PCLK_VCO_DIV_5_MASK,
794 			 RK3228_PCLK_VCO_DIV_5(cfg->vco_div_5_en));
795 	inno_write(inno, 0xa1, RK3328_PRE_PLL_PRE_DIV(cfg->prediv));
796 
797 	val = RK3328_SPREAD_SPECTRUM_MOD_DISABLE;
798 	if (!cfg->fracdiv)
799 		val |= RK3328_PRE_PLL_FRAC_DIV_DISABLE;
800 	inno_write(inno, 0xa2, RK3328_PRE_PLL_FB_DIV_11_8(cfg->fbdiv) | val);
801 	inno_write(inno, 0xa3, RK3328_PRE_PLL_FB_DIV_7_0(cfg->fbdiv));
802 	inno_write(inno, 0xa5, RK3328_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a) |
803 		   RK3328_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b));
804 	inno_write(inno, 0xa6, RK3328_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) |
805 		   RK3328_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d));
806 	inno_write(inno, 0xa4, RK3328_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) |
807 		   RK3328_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) |
808 		   RK3328_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b));
809 	inno_write(inno, 0xd3, RK3328_PRE_PLL_FRAC_DIV_7_0(cfg->fracdiv));
810 	inno_write(inno, 0xd2, RK3328_PRE_PLL_FRAC_DIV_15_8(cfg->fracdiv));
811 	inno_write(inno, 0xd1, RK3328_PRE_PLL_FRAC_DIV_23_16(cfg->fracdiv));
812 
813 	inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0);
814 
815 	/* Wait for Pre-PLL lock */
816 	ret = inno_poll(inno, 0xa9, val, val & RK3328_PRE_PLL_LOCK_STATUS,
817 			1000, 10000);
818 	if (ret) {
819 		dev_err(inno->dev, "Pre-PLL locking failed\n");
820 		return ret;
821 	}
822 
823 	inno->pixclock = rate;
824 
825 	return 0;
826 }
827 
828 static const struct clk_ops inno_hdmi_phy_rk3328_clk_ops = {
829 	.prepare = inno_hdmi_phy_rk3328_clk_prepare,
830 	.unprepare = inno_hdmi_phy_rk3328_clk_unprepare,
831 	.is_prepared = inno_hdmi_phy_rk3328_clk_is_prepared,
832 	.recalc_rate = inno_hdmi_phy_rk3328_clk_recalc_rate,
833 	.round_rate = inno_hdmi_phy_rk3328_clk_round_rate,
834 	.set_rate = inno_hdmi_phy_rk3328_clk_set_rate,
835 };
836 
837 static int inno_hdmi_phy_clk_register(struct inno_hdmi_phy *inno)
838 {
839 	struct device *dev = inno->dev;
840 	struct device_node *np = dev->of_node;
841 	struct clk_init_data init;
842 	const char *parent_name;
843 	int ret;
844 
845 	parent_name = __clk_get_name(inno->refoclk);
846 
847 	init.parent_names = &parent_name;
848 	init.num_parents = 1;
849 	init.flags = 0;
850 	init.name = "pin_hd20_pclk";
851 	init.ops = inno->plat_data->clk_ops;
852 
853 	/* optional override of the clock name */
854 	of_property_read_string(np, "clock-output-names", &init.name);
855 
856 	inno->hw.init = &init;
857 
858 	inno->phyclk = devm_clk_register(dev, &inno->hw);
859 	if (IS_ERR(inno->phyclk)) {
860 		ret = PTR_ERR(inno->phyclk);
861 		dev_err(dev, "failed to register clock: %d\n", ret);
862 		return ret;
863 	}
864 
865 	ret = of_clk_add_provider(np, of_clk_src_simple_get, inno->phyclk);
866 	if (ret) {
867 		dev_err(dev, "failed to register clock provider: %d\n", ret);
868 		return ret;
869 	}
870 
871 	return 0;
872 }
873 
874 static int inno_hdmi_phy_rk3228_init(struct inno_hdmi_phy *inno)
875 {
876 	/*
877 	 * Use phy internal register control
878 	 * rxsense/poweron/pllpd/pdataen signal.
879 	 */
880 	inno_write(inno, 0x01, RK3228_BYPASS_RXSENSE_EN |
881 		   RK3228_BYPASS_PWRON_EN |
882 		   RK3228_BYPASS_PLLPD_EN);
883 	inno_update_bits(inno, 0x02, RK3228_BYPASS_PDATA_EN,
884 			 RK3228_BYPASS_PDATA_EN);
885 
886 	/* manual power down post-PLL */
887 	inno_update_bits(inno, 0xaa, RK3228_POST_PLL_CTRL_MANUAL,
888 			 RK3228_POST_PLL_CTRL_MANUAL);
889 
890 	inno->chip_version = 1;
891 
892 	return 0;
893 }
894 
895 static int
896 inno_hdmi_phy_rk3228_power_on(struct inno_hdmi_phy *inno,
897 			      const struct post_pll_config *cfg,
898 			      const struct phy_config *phy_cfg)
899 {
900 	int ret;
901 	u32 v;
902 
903 	inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE,
904 			 RK3228_PDATAEN_DISABLE);
905 	inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN |
906 			 RK3228_POST_PLL_POWER_DOWN,
907 			 RK3228_PRE_PLL_POWER_DOWN |
908 			 RK3228_POST_PLL_POWER_DOWN);
909 
910 	/* Post-PLL update */
911 	inno_update_bits(inno, 0xe9, RK3228_POST_PLL_PRE_DIV_MASK,
912 			 RK3228_POST_PLL_PRE_DIV(cfg->prediv));
913 	inno_update_bits(inno, 0xeb, RK3228_POST_PLL_FB_DIV_8_MASK,
914 			 RK3228_POST_PLL_FB_DIV_8(cfg->fbdiv));
915 	inno_write(inno, 0xea, RK3228_POST_PLL_FB_DIV_7_0(cfg->fbdiv));
916 
917 	if (cfg->postdiv == 1) {
918 		inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE,
919 				 0);
920 	} else {
921 		int div = cfg->postdiv / 2 - 1;
922 
923 		inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE,
924 				 RK3228_POST_PLL_POST_DIV_ENABLE);
925 		inno_update_bits(inno, 0xeb, RK3228_POST_PLL_POST_DIV_MASK,
926 				 RK3228_POST_PLL_POST_DIV(div));
927 	}
928 
929 	for (v = 0; v < 4; v++)
930 		inno_write(inno, 0xef + v, phy_cfg->regs[v]);
931 
932 	inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN |
933 			 RK3228_POST_PLL_POWER_DOWN, 0);
934 	inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE,
935 			 RK3228_BANDGAP_ENABLE);
936 	inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE,
937 			 RK3228_TMDS_DRIVER_ENABLE);
938 
939 	/* Wait for post PLL lock */
940 	ret = inno_poll(inno, 0xeb, v, v & RK3228_POST_PLL_LOCK_STATUS,
941 			100, 100000);
942 	if (ret) {
943 		dev_err(inno->dev, "Post-PLL locking failed\n");
944 		return ret;
945 	}
946 
947 	if (cfg->tmdsclock > 340000000)
948 		msleep(100);
949 
950 	inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE, 0);
951 	return 0;
952 }
953 
954 static void inno_hdmi_phy_rk3228_power_off(struct inno_hdmi_phy *inno)
955 {
956 	inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE, 0);
957 	inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE, 0);
958 	inno_update_bits(inno, 0xe0, RK3228_POST_PLL_POWER_DOWN,
959 			 RK3228_POST_PLL_POWER_DOWN);
960 }
961 
962 static const struct inno_hdmi_phy_ops rk3228_hdmi_phy_ops = {
963 	.init = inno_hdmi_phy_rk3228_init,
964 	.power_on = inno_hdmi_phy_rk3228_power_on,
965 	.power_off = inno_hdmi_phy_rk3228_power_off,
966 };
967 
968 static int inno_hdmi_phy_rk3328_init(struct inno_hdmi_phy *inno)
969 {
970 	struct nvmem_cell *cell;
971 	unsigned char *efuse_buf;
972 	size_t len;
973 
974 	/*
975 	 * Use phy internal register control
976 	 * rxsense/poweron/pllpd/pdataen signal.
977 	 */
978 	inno_write(inno, 0x01, RK3328_BYPASS_RXSENSE_EN |
979 		   RK3328_BYPASS_POWERON_EN |
980 		   RK3328_BYPASS_PLLPD_EN);
981 	inno_write(inno, 0x02, RK3328_INT_POL_HIGH | RK3328_BYPASS_PDATA_EN |
982 		   RK3328_PDATA_EN);
983 
984 	/* Disable phy irq */
985 	inno_write(inno, 0x05, 0);
986 	inno_write(inno, 0x07, 0);
987 
988 	/* try to read the chip-version */
989 	inno->chip_version = 1;
990 	cell = nvmem_cell_get(inno->dev, "cpu-version");
991 	if (IS_ERR(cell)) {
992 		if (PTR_ERR(cell) == -EPROBE_DEFER)
993 			return -EPROBE_DEFER;
994 
995 		return 0;
996 	}
997 
998 	efuse_buf = nvmem_cell_read(cell, &len);
999 	nvmem_cell_put(cell);
1000 
1001 	if (IS_ERR(efuse_buf))
1002 		return 0;
1003 	if (len == 1)
1004 		inno->chip_version = efuse_buf[0] + 1;
1005 	kfree(efuse_buf);
1006 
1007 	return 0;
1008 }
1009 
1010 static int
1011 inno_hdmi_phy_rk3328_power_on(struct inno_hdmi_phy *inno,
1012 			      const struct post_pll_config *cfg,
1013 			      const struct phy_config *phy_cfg)
1014 {
1015 	int ret;
1016 	u32 v;
1017 
1018 	inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0);
1019 	inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN,
1020 			 RK3328_POST_PLL_POWER_DOWN);
1021 
1022 	inno_write(inno, 0xac, RK3328_POST_PLL_FB_DIV_7_0(cfg->fbdiv));
1023 	if (cfg->postdiv == 1) {
1024 		inno_write(inno, 0xaa, RK3328_POST_PLL_REFCLK_SEL_TMDS);
1025 		inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) |
1026 			   RK3328_POST_PLL_PRE_DIV(cfg->prediv));
1027 	} else {
1028 		v = (cfg->postdiv / 2) - 1;
1029 		v &= RK3328_POST_PLL_POST_DIV_MASK;
1030 		inno_write(inno, 0xad, v);
1031 		inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) |
1032 			   RK3328_POST_PLL_PRE_DIV(cfg->prediv));
1033 		inno_write(inno, 0xaa, RK3328_POST_PLL_POST_DIV_ENABLE |
1034 			   RK3328_POST_PLL_REFCLK_SEL_TMDS);
1035 	}
1036 
1037 	for (v = 0; v < 14; v++)
1038 		inno_write(inno, 0xb5 + v, phy_cfg->regs[v]);
1039 
1040 	/* set ESD detection threshold for TMDS CLK, D2, D1 and D0 */
1041 	for (v = 0; v < 4; v++)
1042 		inno_update_bits(inno, 0xc8 + v, RK3328_ESD_DETECT_MASK,
1043 				 RK3328_ESD_DETECT_340MV);
1044 
1045 	if (phy_cfg->tmdsclock > 340000000) {
1046 		/* Set termination resistor to 100ohm */
1047 		v = clk_get_rate(inno->sysclk) / 100000;
1048 		inno_write(inno, 0xc5, RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(v)
1049 			   | RK3328_BYPASS_TERM_RESISTOR_CALIB);
1050 		inno_write(inno, 0xc6, RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(v));
1051 		inno_write(inno, 0xc7, RK3328_TERM_RESISTOR_100);
1052 		inno_update_bits(inno, 0xc5,
1053 				 RK3328_BYPASS_TERM_RESISTOR_CALIB, 0);
1054 	} else {
1055 		inno_write(inno, 0xc5, RK3328_BYPASS_TERM_RESISTOR_CALIB);
1056 
1057 		/* clk termination resistor is 50ohm (parallel resistors) */
1058 		if (phy_cfg->tmdsclock > 165000000)
1059 			inno_update_bits(inno, 0xc8,
1060 					 RK3328_TMDS_TERM_RESIST_MASK,
1061 					 RK3328_TMDS_TERM_RESIST_75 |
1062 					 RK3328_TMDS_TERM_RESIST_150);
1063 
1064 		/* data termination resistor for D2, D1 and D0 is 150ohm */
1065 		for (v = 0; v < 3; v++)
1066 			inno_update_bits(inno, 0xc9 + v,
1067 					 RK3328_TMDS_TERM_RESIST_MASK,
1068 					 RK3328_TMDS_TERM_RESIST_150);
1069 	}
1070 
1071 	inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN, 0);
1072 	inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE,
1073 			 RK3328_BANDGAP_ENABLE);
1074 	inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE,
1075 			 RK3328_TMDS_DRIVER_ENABLE);
1076 
1077 	/* Wait for post PLL lock */
1078 	ret = inno_poll(inno, 0xaf, v, v & RK3328_POST_PLL_LOCK_STATUS,
1079 			1000, 10000);
1080 	if (ret) {
1081 		dev_err(inno->dev, "Post-PLL locking failed\n");
1082 		return ret;
1083 	}
1084 
1085 	if (phy_cfg->tmdsclock > 340000000)
1086 		msleep(100);
1087 
1088 	inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN);
1089 
1090 	/* Enable PHY IRQ */
1091 	inno_write(inno, 0x05, RK3328_INT_TMDS_CLK(RK3328_INT_VSS_AGND_ESD_DET)
1092 		   | RK3328_INT_TMDS_D2(RK3328_INT_VSS_AGND_ESD_DET));
1093 	inno_write(inno, 0x07, RK3328_INT_TMDS_D1(RK3328_INT_VSS_AGND_ESD_DET)
1094 		   | RK3328_INT_TMDS_D0(RK3328_INT_VSS_AGND_ESD_DET));
1095 	return 0;
1096 }
1097 
1098 static void inno_hdmi_phy_rk3328_power_off(struct inno_hdmi_phy *inno)
1099 {
1100 	inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE, 0);
1101 	inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE, 0);
1102 	inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN,
1103 			 RK3328_POST_PLL_POWER_DOWN);
1104 
1105 	/* Disable PHY IRQ */
1106 	inno_write(inno, 0x05, 0);
1107 	inno_write(inno, 0x07, 0);
1108 }
1109 
1110 static const struct inno_hdmi_phy_ops rk3328_hdmi_phy_ops = {
1111 	.init = inno_hdmi_phy_rk3328_init,
1112 	.power_on = inno_hdmi_phy_rk3328_power_on,
1113 	.power_off = inno_hdmi_phy_rk3328_power_off,
1114 };
1115 
1116 static const struct inno_hdmi_phy_drv_data rk3228_hdmi_phy_drv_data = {
1117 	.ops = &rk3228_hdmi_phy_ops,
1118 	.clk_ops = &inno_hdmi_phy_rk3228_clk_ops,
1119 	.phy_cfg_table = rk3228_phy_cfg,
1120 };
1121 
1122 static const struct inno_hdmi_phy_drv_data rk3328_hdmi_phy_drv_data = {
1123 	.ops = &rk3328_hdmi_phy_ops,
1124 	.clk_ops = &inno_hdmi_phy_rk3328_clk_ops,
1125 	.phy_cfg_table = rk3328_phy_cfg,
1126 };
1127 
1128 static const struct regmap_config inno_hdmi_phy_regmap_config = {
1129 	.reg_bits = 32,
1130 	.val_bits = 32,
1131 	.reg_stride = 4,
1132 	.max_register = 0x400,
1133 };
1134 
1135 static void inno_hdmi_phy_action(void *data)
1136 {
1137 	struct inno_hdmi_phy *inno = data;
1138 
1139 	clk_disable_unprepare(inno->refpclk);
1140 	clk_disable_unprepare(inno->sysclk);
1141 }
1142 
1143 static int inno_hdmi_phy_probe(struct platform_device *pdev)
1144 {
1145 	struct inno_hdmi_phy *inno;
1146 	struct phy_provider *phy_provider;
1147 	void __iomem *regs;
1148 	int ret;
1149 
1150 	inno = devm_kzalloc(&pdev->dev, sizeof(*inno), GFP_KERNEL);
1151 	if (!inno)
1152 		return -ENOMEM;
1153 
1154 	inno->dev = &pdev->dev;
1155 
1156 	inno->plat_data = of_device_get_match_data(inno->dev);
1157 	if (!inno->plat_data || !inno->plat_data->ops)
1158 		return -EINVAL;
1159 
1160 	regs = devm_platform_ioremap_resource(pdev, 0);
1161 	if (IS_ERR(regs))
1162 		return PTR_ERR(regs);
1163 
1164 	inno->sysclk = devm_clk_get(inno->dev, "sysclk");
1165 	if (IS_ERR(inno->sysclk)) {
1166 		ret = PTR_ERR(inno->sysclk);
1167 		dev_err(inno->dev, "failed to get sysclk: %d\n", ret);
1168 		return ret;
1169 	}
1170 
1171 	inno->refpclk = devm_clk_get(inno->dev, "refpclk");
1172 	if (IS_ERR(inno->refpclk)) {
1173 		ret = PTR_ERR(inno->refpclk);
1174 		dev_err(inno->dev, "failed to get ref clock: %d\n", ret);
1175 		return ret;
1176 	}
1177 
1178 	inno->refoclk = devm_clk_get(inno->dev, "refoclk");
1179 	if (IS_ERR(inno->refoclk)) {
1180 		ret = PTR_ERR(inno->refoclk);
1181 		dev_err(inno->dev, "failed to get oscillator-ref clock: %d\n",
1182 			ret);
1183 		return ret;
1184 	}
1185 
1186 	ret = clk_prepare_enable(inno->sysclk);
1187 	if (ret) {
1188 		dev_err(inno->dev, "Cannot enable inno phy sysclk: %d\n", ret);
1189 		return ret;
1190 	}
1191 
1192 	/*
1193 	 * Refpclk needs to be on, on at least the rk3328 for still
1194 	 * unknown reasons.
1195 	 */
1196 	ret = clk_prepare_enable(inno->refpclk);
1197 	if (ret) {
1198 		dev_err(inno->dev, "failed to enable refpclk\n");
1199 		clk_disable_unprepare(inno->sysclk);
1200 		return ret;
1201 	}
1202 
1203 	ret = devm_add_action_or_reset(inno->dev, inno_hdmi_phy_action,
1204 				       inno);
1205 	if (ret)
1206 		return ret;
1207 
1208 	inno->regmap = devm_regmap_init_mmio(inno->dev, regs,
1209 					     &inno_hdmi_phy_regmap_config);
1210 	if (IS_ERR(inno->regmap))
1211 		return PTR_ERR(inno->regmap);
1212 
1213 	/* only the newer rk3328 hdmiphy has an interrupt */
1214 	inno->irq = platform_get_irq(pdev, 0);
1215 	if (inno->irq > 0) {
1216 		ret = devm_request_threaded_irq(inno->dev, inno->irq,
1217 						inno_hdmi_phy_rk3328_hardirq,
1218 						inno_hdmi_phy_rk3328_irq,
1219 						IRQF_SHARED,
1220 						dev_name(inno->dev), inno);
1221 		if (ret)
1222 			return ret;
1223 	}
1224 
1225 	inno->phy = devm_phy_create(inno->dev, NULL, &inno_hdmi_phy_ops);
1226 	if (IS_ERR(inno->phy)) {
1227 		dev_err(inno->dev, "failed to create HDMI PHY\n");
1228 		return PTR_ERR(inno->phy);
1229 	}
1230 
1231 	phy_set_drvdata(inno->phy, inno);
1232 	phy_set_bus_width(inno->phy, 8);
1233 
1234 	if (inno->plat_data->ops->init) {
1235 		ret = inno->plat_data->ops->init(inno);
1236 		if (ret)
1237 			return ret;
1238 	}
1239 
1240 	ret = inno_hdmi_phy_clk_register(inno);
1241 	if (ret)
1242 		return ret;
1243 
1244 	phy_provider = devm_of_phy_provider_register(inno->dev,
1245 						     of_phy_simple_xlate);
1246 	return PTR_ERR_OR_ZERO(phy_provider);
1247 }
1248 
1249 static void inno_hdmi_phy_remove(struct platform_device *pdev)
1250 {
1251 	of_clk_del_provider(pdev->dev.of_node);
1252 }
1253 
1254 static const struct of_device_id inno_hdmi_phy_of_match[] = {
1255 	{
1256 		.compatible = "rockchip,rk3228-hdmi-phy",
1257 		.data = &rk3228_hdmi_phy_drv_data
1258 	}, {
1259 		.compatible = "rockchip,rk3328-hdmi-phy",
1260 		.data = &rk3328_hdmi_phy_drv_data
1261 	}, { /* sentinel */ }
1262 };
1263 MODULE_DEVICE_TABLE(of, inno_hdmi_phy_of_match);
1264 
1265 static struct platform_driver inno_hdmi_phy_driver = {
1266 	.probe  = inno_hdmi_phy_probe,
1267 	.remove_new = inno_hdmi_phy_remove,
1268 	.driver = {
1269 		.name = "inno-hdmi-phy",
1270 		.of_match_table = inno_hdmi_phy_of_match,
1271 	},
1272 };
1273 module_platform_driver(inno_hdmi_phy_driver);
1274 
1275 MODULE_AUTHOR("Zheng Yang <zhengyang@rock-chips.com>");
1276 MODULE_DESCRIPTION("Innosilion HDMI 2.0 Transmitter PHY Driver");
1277 MODULE_LICENSE("GPL v2");
1278