1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (C) 2017 John Crispin <john@phrozen.org> 4 * 5 * Based on code from 6 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 7 */ 8 9 #include <linux/delay.h> 10 #include <linux/err.h> 11 #include <linux/io.h> 12 #include <linux/kernel.h> 13 #include <linux/mfd/syscon.h> 14 #include <linux/module.h> 15 #include <linux/mutex.h> 16 #include <linux/of.h> 17 #include <linux/phy/phy.h> 18 #include <linux/platform_device.h> 19 #include <linux/regmap.h> 20 #include <linux/reset.h> 21 22 #define RT_SYSC_REG_SYSCFG1 0x014 23 #define RT_SYSC_REG_CLKCFG1 0x030 24 #define RT_SYSC_REG_USB_PHY_CFG 0x05c 25 26 #define OFS_U2_PHY_AC0 0x800 27 #define OFS_U2_PHY_AC1 0x804 28 #define OFS_U2_PHY_AC2 0x808 29 #define OFS_U2_PHY_ACR0 0x810 30 #define OFS_U2_PHY_ACR1 0x814 31 #define OFS_U2_PHY_ACR2 0x818 32 #define OFS_U2_PHY_ACR3 0x81C 33 #define OFS_U2_PHY_ACR4 0x820 34 #define OFS_U2_PHY_AMON0 0x824 35 #define OFS_U2_PHY_DCR0 0x860 36 #define OFS_U2_PHY_DCR1 0x864 37 #define OFS_U2_PHY_DTM0 0x868 38 #define OFS_U2_PHY_DTM1 0x86C 39 40 #define RT_RSTCTRL_UDEV BIT(25) 41 #define RT_RSTCTRL_UHST BIT(22) 42 #define RT_SYSCFG1_USB0_HOST_MODE BIT(10) 43 44 #define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25) 45 #define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22) 46 #define RT_CLKCFG1_UPHY1_CLK_EN BIT(20) 47 #define RT_CLKCFG1_UPHY0_CLK_EN BIT(18) 48 49 #define USB_PHY_UTMI_8B60M BIT(1) 50 #define UDEV_WAKEUP BIT(0) 51 52 struct ralink_usb_phy { 53 struct reset_control *rstdev; 54 struct reset_control *rsthost; 55 u32 clk; 56 struct phy *phy; 57 void __iomem *base; 58 struct regmap *sysctl; 59 }; 60 61 static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg) 62 { 63 writel(val, phy->base + reg); 64 } 65 66 static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg) 67 { 68 return readl(phy->base + reg); 69 } 70 71 static void ralink_usb_phy_init(struct ralink_usb_phy *phy) 72 { 73 u2_phy_r32(phy, OFS_U2_PHY_AC2); 74 u2_phy_r32(phy, OFS_U2_PHY_ACR0); 75 u2_phy_r32(phy, OFS_U2_PHY_DCR0); 76 77 u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0); 78 u2_phy_r32(phy, OFS_U2_PHY_DCR0); 79 u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0); 80 u2_phy_r32(phy, OFS_U2_PHY_DCR0); 81 u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0); 82 u2_phy_r32(phy, OFS_U2_PHY_DCR0); 83 u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0); 84 u2_phy_r32(phy, OFS_U2_PHY_DCR0); 85 u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0); 86 u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1); 87 u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3); 88 u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0); 89 } 90 91 static int ralink_usb_phy_power_on(struct phy *_phy) 92 { 93 struct ralink_usb_phy *phy = phy_get_drvdata(_phy); 94 u32 t; 95 96 /* enable the phy */ 97 regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1, 98 phy->clk, phy->clk); 99 100 /* setup host mode */ 101 regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1, 102 RT_SYSCFG1_USB0_HOST_MODE, 103 RT_SYSCFG1_USB0_HOST_MODE); 104 105 /* deassert the reset lines */ 106 reset_control_deassert(phy->rsthost); 107 reset_control_deassert(phy->rstdev); 108 109 /* 110 * The SDK kernel had a delay of 100ms. however on device 111 * testing showed that 10ms is enough 112 */ 113 mdelay(10); 114 115 if (phy->base) 116 ralink_usb_phy_init(phy); 117 118 /* print some status info */ 119 regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t); 120 dev_info(&phy->phy->dev, "remote usb device wakeup %s\n", 121 (t & UDEV_WAKEUP) ? ("enabled") : ("disabled")); 122 if (t & USB_PHY_UTMI_8B60M) 123 dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n"); 124 else 125 dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n"); 126 127 return 0; 128 } 129 130 static int ralink_usb_phy_power_off(struct phy *_phy) 131 { 132 struct ralink_usb_phy *phy = phy_get_drvdata(_phy); 133 134 /* disable the phy */ 135 regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1, 136 phy->clk, 0); 137 138 /* assert the reset lines */ 139 reset_control_assert(phy->rstdev); 140 reset_control_assert(phy->rsthost); 141 142 return 0; 143 } 144 145 static const struct phy_ops ralink_usb_phy_ops = { 146 .power_on = ralink_usb_phy_power_on, 147 .power_off = ralink_usb_phy_power_off, 148 .owner = THIS_MODULE, 149 }; 150 151 static const struct of_device_id ralink_usb_phy_of_match[] = { 152 { 153 .compatible = "ralink,rt3352-usbphy", 154 .data = (void *)(uintptr_t)(RT_CLKCFG1_UPHY1_CLK_EN | 155 RT_CLKCFG1_UPHY0_CLK_EN) 156 }, 157 { 158 .compatible = "mediatek,mt7620-usbphy", 159 .data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN | 160 MT7620_CLKCFG1_UPHY0_CLK_EN) 161 }, 162 { 163 .compatible = "mediatek,mt7628-usbphy", 164 .data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN | 165 MT7620_CLKCFG1_UPHY0_CLK_EN) }, 166 { }, 167 }; 168 MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match); 169 170 static int ralink_usb_phy_probe(struct platform_device *pdev) 171 { 172 struct device *dev = &pdev->dev; 173 struct phy_provider *phy_provider; 174 struct ralink_usb_phy *phy; 175 176 phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); 177 if (!phy) 178 return -ENOMEM; 179 180 phy->clk = (uintptr_t)device_get_match_data(&pdev->dev); 181 phy->base = NULL; 182 183 phy->sysctl = syscon_regmap_lookup_by_phandle(dev->of_node, "ralink,sysctl"); 184 if (IS_ERR(phy->sysctl)) { 185 dev_err(dev, "failed to get sysctl registers\n"); 186 return PTR_ERR(phy->sysctl); 187 } 188 189 /* The MT7628 and MT7688 require extra setup of PHY registers. */ 190 if (of_device_is_compatible(dev->of_node, "mediatek,mt7628-usbphy")) { 191 phy->base = devm_platform_ioremap_resource(pdev, 0); 192 if (IS_ERR(phy->base)) { 193 dev_err(dev, "failed to remap register memory\n"); 194 return PTR_ERR(phy->base); 195 } 196 } 197 198 phy->rsthost = devm_reset_control_get(&pdev->dev, "host"); 199 if (IS_ERR(phy->rsthost)) { 200 dev_err(dev, "host reset is missing\n"); 201 return PTR_ERR(phy->rsthost); 202 } 203 204 phy->rstdev = devm_reset_control_get(&pdev->dev, "device"); 205 if (IS_ERR(phy->rstdev)) { 206 dev_err(dev, "device reset is missing\n"); 207 return PTR_ERR(phy->rstdev); 208 } 209 210 phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops); 211 if (IS_ERR(phy->phy)) { 212 dev_err(dev, "failed to create PHY\n"); 213 return PTR_ERR(phy->phy); 214 } 215 phy_set_drvdata(phy->phy, phy); 216 217 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); 218 219 return PTR_ERR_OR_ZERO(phy_provider); 220 } 221 222 static struct platform_driver ralink_usb_phy_driver = { 223 .probe = ralink_usb_phy_probe, 224 .driver = { 225 .of_match_table = ralink_usb_phy_of_match, 226 .name = "ralink-usb-phy", 227 } 228 }; 229 module_platform_driver(ralink_usb_phy_driver); 230 231 MODULE_DESCRIPTION("Ralink USB phy driver"); 232 MODULE_AUTHOR("John Crispin <john@phrozen.org>"); 233 MODULE_LICENSE("GPL v2"); 234