1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Mediatek MT7621 PCI PHY Driver 4 * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com> 5 */ 6 7 #include <dt-bindings/phy/phy.h> 8 #include <linux/clk.h> 9 #include <linux/bitfield.h> 10 #include <linux/bitops.h> 11 #include <linux/module.h> 12 #include <linux/of.h> 13 #include <linux/phy/phy.h> 14 #include <linux/platform_device.h> 15 #include <linux/regmap.h> 16 #include <linux/sys_soc.h> 17 18 #define RG_PE1_PIPE_REG 0x02c 19 #define RG_PE1_PIPE_RST BIT(12) 20 #define RG_PE1_PIPE_CMD_FRC BIT(4) 21 22 #define RG_P0_TO_P1_WIDTH 0x100 23 #define RG_PE1_H_LCDDS_REG 0x49c 24 #define RG_PE1_H_LCDDS_PCW GENMASK(30, 0) 25 26 #define RG_PE1_FRC_H_XTAL_REG 0x400 27 #define RG_PE1_FRC_H_XTAL_TYPE BIT(8) 28 #define RG_PE1_H_XTAL_TYPE GENMASK(10, 9) 29 30 #define RG_PE1_FRC_PHY_REG 0x000 31 #define RG_PE1_FRC_PHY_EN BIT(4) 32 #define RG_PE1_PHY_EN BIT(5) 33 34 #define RG_PE1_H_PLL_REG 0x490 35 #define RG_PE1_H_PLL_BC GENMASK(23, 22) 36 #define RG_PE1_H_PLL_BP GENMASK(21, 18) 37 #define RG_PE1_H_PLL_IR GENMASK(15, 12) 38 #define RG_PE1_H_PLL_IC GENMASK(11, 8) 39 #define RG_PE1_H_PLL_PREDIV GENMASK(7, 6) 40 #define RG_PE1_PLL_DIVEN GENMASK(3, 1) 41 42 #define RG_PE1_H_PLL_FBKSEL_REG 0x4bc 43 #define RG_PE1_H_PLL_FBKSEL GENMASK(5, 4) 44 45 #define RG_PE1_H_LCDDS_SSC_PRD_REG 0x4a4 46 #define RG_PE1_H_LCDDS_SSC_PRD GENMASK(15, 0) 47 48 #define RG_PE1_H_LCDDS_SSC_DELTA_REG 0x4a8 49 #define RG_PE1_H_LCDDS_SSC_DELTA GENMASK(11, 0) 50 #define RG_PE1_H_LCDDS_SSC_DELTA1 GENMASK(27, 16) 51 52 #define RG_PE1_LCDDS_CLK_PH_INV_REG 0x4a0 53 #define RG_PE1_LCDDS_CLK_PH_INV BIT(5) 54 55 #define RG_PE1_H_PLL_BR_REG 0x4ac 56 #define RG_PE1_H_PLL_BR GENMASK(18, 16) 57 58 #define RG_PE1_MSTCKDIV_REG 0x414 59 #define RG_PE1_MSTCKDIV GENMASK(7, 6) 60 61 #define RG_PE1_FRC_MSTCKDIV BIT(5) 62 63 #define MAX_PHYS 2 64 65 /** 66 * struct mt7621_pci_phy - Mt7621 Pcie PHY core 67 * @dev: pointer to device 68 * @regmap: kernel regmap pointer 69 * @phy: pointer to the kernel PHY device 70 * @sys_clk: pointer to the system XTAL clock 71 * @port_base: base register 72 * @has_dual_port: if the phy has dual ports. 73 * @bypass_pipe_rst: mark if 'mt7621_bypass_pipe_rst' 74 * needs to be executed. Depends on chip revision. 75 */ 76 struct mt7621_pci_phy { 77 struct device *dev; 78 struct regmap *regmap; 79 struct phy *phy; 80 struct clk *sys_clk; 81 void __iomem *port_base; 82 bool has_dual_port; 83 bool bypass_pipe_rst; 84 }; 85 86 static inline void mt7621_phy_rmw(struct mt7621_pci_phy *phy, 87 u32 reg, u32 clr, u32 set) 88 { 89 u32 val; 90 91 /* 92 * We cannot use 'regmap_write_bits' here because internally 93 * 'set' is masked before is set to the value that will be 94 * written to the register. That way results in no reliable 95 * pci setup. Avoid to mask 'set' before set value to 'val' 96 * completely avoid the problem. 97 */ 98 regmap_read(phy->regmap, reg, &val); 99 val &= ~clr; 100 val |= set; 101 regmap_write(phy->regmap, reg, val); 102 } 103 104 static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy) 105 { 106 mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_RST); 107 mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_CMD_FRC); 108 109 if (phy->has_dual_port) { 110 mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH, 111 0, RG_PE1_PIPE_RST); 112 mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH, 113 0, RG_PE1_PIPE_CMD_FRC); 114 } 115 } 116 117 static int mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy) 118 { 119 struct device *dev = phy->dev; 120 unsigned long clk_rate; 121 122 clk_rate = clk_get_rate(phy->sys_clk); 123 if (!clk_rate) 124 return -EINVAL; 125 126 /* Set PCIe Port PHY to disable SSC */ 127 /* Debug Xtal Type */ 128 mt7621_phy_rmw(phy, RG_PE1_FRC_H_XTAL_REG, 129 RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE, 130 RG_PE1_FRC_H_XTAL_TYPE | 131 FIELD_PREP(RG_PE1_H_XTAL_TYPE, 0x00)); 132 133 /* disable port */ 134 mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG, RG_PE1_PHY_EN, 135 RG_PE1_FRC_PHY_EN); 136 137 if (phy->has_dual_port) { 138 mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH, 139 RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN); 140 } 141 142 if (clk_rate == 40000000) { /* 40MHz Xtal */ 143 /* Set Pre-divider ratio (for host mode) */ 144 mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV, 145 FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x01)); 146 147 dev_dbg(dev, "Xtal is 40MHz\n"); 148 } else if (clk_rate == 25000000) { /* 25MHz Xal */ 149 mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV, 150 FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00)); 151 152 /* Select feedback clock */ 153 mt7621_phy_rmw(phy, RG_PE1_H_PLL_FBKSEL_REG, 154 RG_PE1_H_PLL_FBKSEL, 155 FIELD_PREP(RG_PE1_H_PLL_FBKSEL, 0x01)); 156 157 /* DDS NCPO PCW (for host mode) */ 158 mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG, 159 RG_PE1_H_LCDDS_SSC_PRD, 160 FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x00)); 161 162 /* DDS SSC dither period control */ 163 mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG, 164 RG_PE1_H_LCDDS_SSC_PRD, 165 FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x18d)); 166 167 /* DDS SSC dither amplitude control */ 168 mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_DELTA_REG, 169 RG_PE1_H_LCDDS_SSC_DELTA | 170 RG_PE1_H_LCDDS_SSC_DELTA1, 171 FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA, 0x4a) | 172 FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA1, 0x4a)); 173 174 dev_dbg(dev, "Xtal is 25MHz\n"); 175 } else { /* 20MHz Xtal */ 176 mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV, 177 FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00)); 178 179 dev_dbg(dev, "Xtal is 20MHz\n"); 180 } 181 182 /* DDS clock inversion */ 183 mt7621_phy_rmw(phy, RG_PE1_LCDDS_CLK_PH_INV_REG, 184 RG_PE1_LCDDS_CLK_PH_INV, RG_PE1_LCDDS_CLK_PH_INV); 185 186 /* Set PLL bits */ 187 mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, 188 RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR | 189 RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN, 190 FIELD_PREP(RG_PE1_H_PLL_BC, 0x02) | 191 FIELD_PREP(RG_PE1_H_PLL_BP, 0x06) | 192 FIELD_PREP(RG_PE1_H_PLL_IR, 0x02) | 193 FIELD_PREP(RG_PE1_H_PLL_IC, 0x01) | 194 FIELD_PREP(RG_PE1_PLL_DIVEN, 0x02)); 195 196 mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, RG_PE1_H_PLL_BR, 197 FIELD_PREP(RG_PE1_H_PLL_BR, 0x00)); 198 199 if (clk_rate == 40000000) { /* 40MHz Xtal */ 200 /* set force mode enable of da_pe1_mstckdiv */ 201 mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG, 202 RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV, 203 FIELD_PREP(RG_PE1_MSTCKDIV, 0x01) | 204 RG_PE1_FRC_MSTCKDIV); 205 } 206 207 return 0; 208 } 209 210 static int mt7621_pci_phy_init(struct phy *phy) 211 { 212 struct mt7621_pci_phy *mphy = phy_get_drvdata(phy); 213 214 if (mphy->bypass_pipe_rst) 215 mt7621_bypass_pipe_rst(mphy); 216 217 return mt7621_set_phy_for_ssc(mphy); 218 } 219 220 static int mt7621_pci_phy_power_on(struct phy *phy) 221 { 222 struct mt7621_pci_phy *mphy = phy_get_drvdata(phy); 223 224 /* Enable PHY and disable force mode */ 225 mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG, 226 RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN); 227 228 if (mphy->has_dual_port) { 229 mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH, 230 RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN); 231 } 232 233 return 0; 234 } 235 236 static int mt7621_pci_phy_power_off(struct phy *phy) 237 { 238 struct mt7621_pci_phy *mphy = phy_get_drvdata(phy); 239 240 /* Disable PHY */ 241 mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG, 242 RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN); 243 244 if (mphy->has_dual_port) { 245 mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH, 246 RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN); 247 } 248 249 return 0; 250 } 251 252 static int mt7621_pci_phy_exit(struct phy *phy) 253 { 254 return 0; 255 } 256 257 static const struct phy_ops mt7621_pci_phy_ops = { 258 .init = mt7621_pci_phy_init, 259 .exit = mt7621_pci_phy_exit, 260 .power_on = mt7621_pci_phy_power_on, 261 .power_off = mt7621_pci_phy_power_off, 262 .owner = THIS_MODULE, 263 }; 264 265 static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev, 266 const struct of_phandle_args *args) 267 { 268 struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev); 269 270 if (WARN_ON(args->args[0] >= MAX_PHYS)) 271 return ERR_PTR(-ENODEV); 272 273 mt7621_phy->has_dual_port = args->args[0]; 274 275 dev_dbg(dev, "PHY for 0x%px (dual port = %d)\n", 276 mt7621_phy->port_base, mt7621_phy->has_dual_port); 277 278 return mt7621_phy->phy; 279 } 280 281 static const struct soc_device_attribute mt7621_pci_quirks_match[] = { 282 { .soc_id = "mt7621", .revision = "E2" }, 283 { /* sentinel */ } 284 }; 285 286 static const struct regmap_config mt7621_pci_phy_regmap_config = { 287 .reg_bits = 32, 288 .val_bits = 32, 289 .reg_stride = 4, 290 .max_register = 0x700, 291 }; 292 293 static int mt7621_pci_phy_probe(struct platform_device *pdev) 294 { 295 struct device *dev = &pdev->dev; 296 const struct soc_device_attribute *attr; 297 struct phy_provider *provider; 298 struct mt7621_pci_phy *phy; 299 300 phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); 301 if (!phy) 302 return -ENOMEM; 303 304 attr = soc_device_match(mt7621_pci_quirks_match); 305 if (attr) 306 phy->bypass_pipe_rst = true; 307 308 phy->dev = dev; 309 platform_set_drvdata(pdev, phy); 310 311 phy->port_base = devm_platform_ioremap_resource(pdev, 0); 312 if (IS_ERR(phy->port_base)) { 313 dev_err(dev, "failed to remap phy regs\n"); 314 return PTR_ERR(phy->port_base); 315 } 316 317 phy->regmap = devm_regmap_init_mmio(phy->dev, phy->port_base, 318 &mt7621_pci_phy_regmap_config); 319 if (IS_ERR(phy->regmap)) 320 return PTR_ERR(phy->regmap); 321 322 phy->phy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops); 323 if (IS_ERR(phy->phy)) { 324 dev_err(dev, "failed to create phy\n"); 325 return PTR_ERR(phy->phy); 326 } 327 328 phy->sys_clk = devm_clk_get(dev, NULL); 329 if (IS_ERR(phy->sys_clk)) { 330 dev_err(dev, "failed to get phy clock\n"); 331 return PTR_ERR(phy->sys_clk); 332 } 333 334 phy_set_drvdata(phy->phy, phy); 335 336 provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate); 337 338 return PTR_ERR_OR_ZERO(provider); 339 } 340 341 static const struct of_device_id mt7621_pci_phy_ids[] = { 342 { .compatible = "mediatek,mt7621-pci-phy" }, 343 {}, 344 }; 345 MODULE_DEVICE_TABLE(of, mt7621_pci_phy_ids); 346 347 static struct platform_driver mt7621_pci_phy_driver = { 348 .probe = mt7621_pci_phy_probe, 349 .driver = { 350 .name = "mt7621-pci-phy", 351 .of_match_table = mt7621_pci_phy_ids, 352 }, 353 }; 354 355 builtin_platform_driver(mt7621_pci_phy_driver); 356 357 MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos@gmail.com>"); 358 MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver"); 359 MODULE_LICENSE("GPL v2"); 360