xref: /linux/drivers/phy/marvell/phy-pxa-usb.c (revision cdd38c5f1ce4398ec58fec95904b75824daab7b5)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
4  * Copyright (C) 2018 Lubomir Rintel <lkundrak@v3.sk>
5  */
6 
7 #include <dt-bindings/phy/phy.h>
8 #include <linux/clk.h>
9 #include <linux/delay.h>
10 #include <linux/io.h>
11 #include <linux/module.h>
12 #include <linux/of_address.h>
13 #include <linux/phy/phy.h>
14 #include <linux/platform_device.h>
15 
16 /* phy regs */
17 #define UTMI_REVISION		0x0
18 #define UTMI_CTRL		0x4
19 #define UTMI_PLL		0x8
20 #define UTMI_TX			0xc
21 #define UTMI_RX			0x10
22 #define UTMI_IVREF		0x14
23 #define UTMI_T0			0x18
24 #define UTMI_T1			0x1c
25 #define UTMI_T2			0x20
26 #define UTMI_T3			0x24
27 #define UTMI_T4			0x28
28 #define UTMI_T5			0x2c
29 #define UTMI_RESERVE		0x30
30 #define UTMI_USB_INT		0x34
31 #define UTMI_DBG_CTL		0x38
32 #define UTMI_OTG_ADDON		0x3c
33 
34 /* For UTMICTRL Register */
35 #define UTMI_CTRL_USB_CLK_EN                    (1 << 31)
36 /* pxa168 */
37 #define UTMI_CTRL_SUSPEND_SET1                  (1 << 30)
38 #define UTMI_CTRL_SUSPEND_SET2                  (1 << 29)
39 #define UTMI_CTRL_RXBUF_PDWN                    (1 << 24)
40 #define UTMI_CTRL_TXBUF_PDWN                    (1 << 11)
41 
42 #define UTMI_CTRL_INPKT_DELAY_SHIFT             30
43 #define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
44 #define UTMI_CTRL_PU_REF_SHIFT			20
45 #define UTMI_CTRL_ARC_PULLDN_SHIFT              12
46 #define UTMI_CTRL_PLL_PWR_UP_SHIFT              1
47 #define UTMI_CTRL_PWR_UP_SHIFT                  0
48 
49 /* For UTMI_PLL Register */
50 #define UTMI_PLL_PLLCALI12_SHIFT		29
51 #define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
52 
53 #define UTMI_PLL_PLLVDD18_SHIFT			27
54 #define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
55 
56 #define UTMI_PLL_PLLVDD12_SHIFT			25
57 #define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
58 
59 #define UTMI_PLL_CLK_BLK_EN_SHIFT               24
60 #define CLK_BLK_EN                              (0x1 << 24)
61 #define PLL_READY                               (0x1 << 23)
62 #define KVCO_EXT                                (0x1 << 22)
63 #define VCOCAL_START                            (0x1 << 21)
64 
65 #define UTMI_PLL_KVCO_SHIFT			15
66 #define UTMI_PLL_KVCO_MASK                      (0x7 << 15)
67 
68 #define UTMI_PLL_ICP_SHIFT			12
69 #define UTMI_PLL_ICP_MASK                       (0x7 << 12)
70 
71 #define UTMI_PLL_FBDIV_SHIFT                    4
72 #define UTMI_PLL_FBDIV_MASK                     (0xFF << 4)
73 
74 #define UTMI_PLL_REFDIV_SHIFT                   0
75 #define UTMI_PLL_REFDIV_MASK                    (0xF << 0)
76 
77 /* For UTMI_TX Register */
78 #define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
79 #define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
80 
81 #define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT	26
82 #define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		(0x1 << 26)
83 
84 #define UTMI_TX_TXVDD12_SHIFT                   22
85 #define UTMI_TX_TXVDD12_MASK                    (0x3 << 22)
86 
87 #define UTMI_TX_CK60_PHSEL_SHIFT                17
88 #define UTMI_TX_CK60_PHSEL_MASK                 (0xf << 17)
89 
90 #define UTMI_TX_IMPCAL_VTH_SHIFT                14
91 #define UTMI_TX_IMPCAL_VTH_MASK                 (0x7 << 14)
92 
93 #define REG_RCAL_START                          (0x1 << 12)
94 
95 #define UTMI_TX_LOW_VDD_EN_SHIFT                11
96 
97 #define UTMI_TX_AMP_SHIFT			0
98 #define UTMI_TX_AMP_MASK			(0x7 << 0)
99 
100 /* For UTMI_RX Register */
101 #define UTMI_REG_SQ_LENGTH_SHIFT                15
102 #define UTMI_REG_SQ_LENGTH_MASK                 (0x3 << 15)
103 
104 #define UTMI_RX_SQ_THRESH_SHIFT                 4
105 #define UTMI_RX_SQ_THRESH_MASK                  (0xf << 4)
106 
107 #define UTMI_OTG_ADDON_OTG_ON			(1 << 0)
108 
109 enum pxa_usb_phy_version {
110 	PXA_USB_PHY_MMP2,
111 	PXA_USB_PHY_PXA910,
112 	PXA_USB_PHY_PXA168,
113 };
114 
115 struct pxa_usb_phy {
116 	struct phy *phy;
117 	void __iomem *base;
118 	enum pxa_usb_phy_version version;
119 };
120 
121 /*****************************************************************************
122  * The registers read/write routines
123  *****************************************************************************/
124 
125 static unsigned int u2o_get(void __iomem *base, unsigned int offset)
126 {
127 	return readl_relaxed(base + offset);
128 }
129 
130 static void u2o_set(void __iomem *base, unsigned int offset,
131 		unsigned int value)
132 {
133 	u32 reg;
134 
135 	reg = readl_relaxed(base + offset);
136 	reg |= value;
137 	writel_relaxed(reg, base + offset);
138 	readl_relaxed(base + offset);
139 }
140 
141 static void u2o_clear(void __iomem *base, unsigned int offset,
142 		unsigned int value)
143 {
144 	u32 reg;
145 
146 	reg = readl_relaxed(base + offset);
147 	reg &= ~value;
148 	writel_relaxed(reg, base + offset);
149 	readl_relaxed(base + offset);
150 }
151 
152 static void u2o_write(void __iomem *base, unsigned int offset,
153 		unsigned int value)
154 {
155 	writel_relaxed(value, base + offset);
156 	readl_relaxed(base + offset);
157 }
158 
159 static int pxa_usb_phy_init(struct phy *phy)
160 {
161 	struct pxa_usb_phy *pxa_usb_phy = phy_get_drvdata(phy);
162 	void __iomem *base = pxa_usb_phy->base;
163 	int loops;
164 
165 	dev_info(&phy->dev, "initializing Marvell PXA USB PHY");
166 
167 	/* Initialize the USB PHY power */
168 	if (pxa_usb_phy->version == PXA_USB_PHY_PXA910) {
169 		u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
170 			| (1<<UTMI_CTRL_PU_REF_SHIFT));
171 	}
172 
173 	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
174 	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
175 
176 	/* UTMI_PLL settings */
177 	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
178 		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
179 		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
180 		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
181 
182 	u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
183 		| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
184 		| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
185 		| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
186 
187 	/* UTMI_TX */
188 	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
189 		| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
190 		| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
191 		| UTMI_TX_AMP_MASK);
192 	u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
193 		| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
194 		| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
195 
196 	/* UTMI_RX */
197 	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
198 		| UTMI_REG_SQ_LENGTH_MASK);
199 	u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
200 		| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
201 
202 	/* UTMI_IVREF */
203 	if (pxa_usb_phy->version == PXA_USB_PHY_PXA168) {
204 		/*
205 		 * fixing Microsoft Altair board interface with NEC hub issue -
206 		 * Set UTMI_IVREF from 0x4a3 to 0x4bf
207 		 */
208 		u2o_write(base, UTMI_IVREF, 0x4bf);
209 	}
210 
211 	/* toggle VCOCAL_START bit of UTMI_PLL */
212 	udelay(200);
213 	u2o_set(base, UTMI_PLL, VCOCAL_START);
214 	udelay(40);
215 	u2o_clear(base, UTMI_PLL, VCOCAL_START);
216 
217 	/* toggle REG_RCAL_START bit of UTMI_TX */
218 	udelay(400);
219 	u2o_set(base, UTMI_TX, REG_RCAL_START);
220 	udelay(40);
221 	u2o_clear(base, UTMI_TX, REG_RCAL_START);
222 	udelay(400);
223 
224 	/* Make sure PHY PLL is ready */
225 	loops = 0;
226 	while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
227 		mdelay(1);
228 		loops++;
229 		if (loops > 100) {
230 			dev_warn(&phy->dev, "calibrate timeout, UTMI_PLL %x\n",
231 						u2o_get(base, UTMI_PLL));
232 			break;
233 		}
234 	}
235 
236 	if (pxa_usb_phy->version == PXA_USB_PHY_PXA168) {
237 		u2o_set(base, UTMI_RESERVE, 1 << 5);
238 		/* Turn on UTMI PHY OTG extension */
239 		u2o_write(base, UTMI_OTG_ADDON, 1);
240 	}
241 
242 	return 0;
243 
244 }
245 
246 static int pxa_usb_phy_exit(struct phy *phy)
247 {
248 	struct pxa_usb_phy *pxa_usb_phy = phy_get_drvdata(phy);
249 	void __iomem *base = pxa_usb_phy->base;
250 
251 	dev_info(&phy->dev, "deinitializing Marvell PXA USB PHY");
252 
253 	if (pxa_usb_phy->version == PXA_USB_PHY_PXA168)
254 		u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
255 
256 	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
257 	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
258 	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
259 	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
260 	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
261 
262 	return 0;
263 }
264 
265 static const struct phy_ops pxa_usb_phy_ops = {
266 	.init	= pxa_usb_phy_init,
267 	.exit	= pxa_usb_phy_exit,
268 	.owner	= THIS_MODULE,
269 };
270 
271 static const struct of_device_id pxa_usb_phy_of_match[] = {
272 	{
273 		.compatible = "marvell,mmp2-usb-phy",
274 		.data = (void *)PXA_USB_PHY_MMP2,
275 	}, {
276 		.compatible = "marvell,pxa910-usb-phy",
277 		.data = (void *)PXA_USB_PHY_PXA910,
278 	}, {
279 		.compatible = "marvell,pxa168-usb-phy",
280 		.data = (void *)PXA_USB_PHY_PXA168,
281 	},
282 	{ },
283 };
284 MODULE_DEVICE_TABLE(of, pxa_usb_phy_of_match);
285 
286 static int pxa_usb_phy_probe(struct platform_device *pdev)
287 {
288 	struct device *dev = &pdev->dev;
289 	struct pxa_usb_phy *pxa_usb_phy;
290 	struct phy_provider *provider;
291 	const struct of_device_id *of_id;
292 
293 	pxa_usb_phy = devm_kzalloc(dev, sizeof(struct pxa_usb_phy), GFP_KERNEL);
294 	if (!pxa_usb_phy)
295 		return -ENOMEM;
296 
297 	of_id = of_match_node(pxa_usb_phy_of_match, dev->of_node);
298 	if (of_id)
299 		pxa_usb_phy->version = (enum pxa_usb_phy_version)of_id->data;
300 	else
301 		pxa_usb_phy->version = PXA_USB_PHY_MMP2;
302 
303 	pxa_usb_phy->base = devm_platform_ioremap_resource(pdev, 0);
304 	if (IS_ERR(pxa_usb_phy->base)) {
305 		dev_err(dev, "failed to remap PHY regs\n");
306 		return PTR_ERR(pxa_usb_phy->base);
307 	}
308 
309 	pxa_usb_phy->phy = devm_phy_create(dev, NULL, &pxa_usb_phy_ops);
310 	if (IS_ERR(pxa_usb_phy->phy)) {
311 		dev_err(dev, "failed to create PHY\n");
312 		return PTR_ERR(pxa_usb_phy->phy);
313 	}
314 
315 	phy_set_drvdata(pxa_usb_phy->phy, pxa_usb_phy);
316 	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
317 	if (IS_ERR(provider)) {
318 		dev_err(dev, "failed to register PHY provider\n");
319 		return PTR_ERR(provider);
320 	}
321 
322 	if (!dev->of_node) {
323 		phy_create_lookup(pxa_usb_phy->phy, "usb", "mv-udc");
324 		phy_create_lookup(pxa_usb_phy->phy, "usb", "pxa-u2oehci");
325 		phy_create_lookup(pxa_usb_phy->phy, "usb", "mv-otg");
326 	}
327 
328 	dev_info(dev, "Marvell PXA USB PHY");
329 	return 0;
330 }
331 
332 static struct platform_driver pxa_usb_phy_driver = {
333 	.probe		= pxa_usb_phy_probe,
334 	.driver		= {
335 		.name	= "pxa-usb-phy",
336 		.of_match_table = pxa_usb_phy_of_match,
337 	},
338 };
339 module_platform_driver(pxa_usb_phy_driver);
340 
341 MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
342 MODULE_DESCRIPTION("Marvell PXA USB PHY Driver");
343 MODULE_LICENSE("GPL v2");
344