1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2015 Linaro, Ltd. 4 * Rob Herring <robh@kernel.org> 5 * 6 * Based on vendor driver: 7 * Copyright (C) 2013 Marvell Inc. 8 * Author: Chao Xie <xiechao.mail@gmail.com> 9 */ 10 11 #include <linux/delay.h> 12 #include <linux/slab.h> 13 #include <linux/of.h> 14 #include <linux/io.h> 15 #include <linux/iopoll.h> 16 #include <linux/err.h> 17 #include <linux/clk.h> 18 #include <linux/module.h> 19 #include <linux/platform_device.h> 20 #include <linux/phy/phy.h> 21 22 #define PHY_28NM_HSIC_CTRL 0x08 23 #define PHY_28NM_HSIC_IMPCAL_CAL 0x18 24 #define PHY_28NM_HSIC_PLL_CTRL01 0x1c 25 #define PHY_28NM_HSIC_PLL_CTRL2 0x20 26 #define PHY_28NM_HSIC_INT 0x28 27 28 #define PHY_28NM_HSIC_PLL_SELLPFR_SHIFT 26 29 #define PHY_28NM_HSIC_PLL_FBDIV_SHIFT 0 30 #define PHY_28NM_HSIC_PLL_REFDIV_SHIFT 9 31 32 #define PHY_28NM_HSIC_S2H_PU_PLL BIT(10) 33 #define PHY_28NM_HSIC_H2S_PLL_LOCK BIT(15) 34 #define PHY_28NM_HSIC_S2H_HSIC_EN BIT(7) 35 #define S2H_DRV_SE0_4RESUME BIT(14) 36 #define PHY_28NM_HSIC_H2S_IMPCAL_DONE BIT(27) 37 38 #define PHY_28NM_HSIC_CONNECT_INT BIT(1) 39 #define PHY_28NM_HSIC_HS_READY_INT BIT(2) 40 41 struct mv_hsic_phy { 42 struct phy *phy; 43 struct platform_device *pdev; 44 void __iomem *base; 45 struct clk *clk; 46 }; 47 48 static int wait_for_reg(void __iomem *reg, u32 mask, u32 ms) 49 { 50 u32 val; 51 52 return readl_poll_timeout(reg, val, ((val & mask) == mask), 53 1000, 1000 * ms); 54 } 55 56 static int mv_hsic_phy_init(struct phy *phy) 57 { 58 struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy); 59 struct platform_device *pdev = mv_phy->pdev; 60 void __iomem *base = mv_phy->base; 61 int ret; 62 63 clk_prepare_enable(mv_phy->clk); 64 65 /* Set reference clock */ 66 writel(0x1 << PHY_28NM_HSIC_PLL_SELLPFR_SHIFT | 67 0xf0 << PHY_28NM_HSIC_PLL_FBDIV_SHIFT | 68 0xd << PHY_28NM_HSIC_PLL_REFDIV_SHIFT, 69 base + PHY_28NM_HSIC_PLL_CTRL01); 70 71 /* Turn on PLL */ 72 writel(readl(base + PHY_28NM_HSIC_PLL_CTRL2) | 73 PHY_28NM_HSIC_S2H_PU_PLL, 74 base + PHY_28NM_HSIC_PLL_CTRL2); 75 76 /* Make sure PHY PLL is locked */ 77 ret = wait_for_reg(base + PHY_28NM_HSIC_PLL_CTRL2, 78 PHY_28NM_HSIC_H2S_PLL_LOCK, 100); 79 if (ret) { 80 dev_err(&pdev->dev, "HSIC PHY PLL not locked after 100mS."); 81 clk_disable_unprepare(mv_phy->clk); 82 } 83 84 return ret; 85 } 86 87 static int mv_hsic_phy_power_on(struct phy *phy) 88 { 89 struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy); 90 struct platform_device *pdev = mv_phy->pdev; 91 void __iomem *base = mv_phy->base; 92 u32 reg; 93 int ret; 94 95 reg = readl(base + PHY_28NM_HSIC_CTRL); 96 /* Avoid SE0 state when resume for some device will take it as reset */ 97 reg &= ~S2H_DRV_SE0_4RESUME; 98 reg |= PHY_28NM_HSIC_S2H_HSIC_EN; /* Enable HSIC PHY */ 99 writel(reg, base + PHY_28NM_HSIC_CTRL); 100 101 /* 102 * Calibration Timing 103 * ____________________________ 104 * CAL START ___| 105 * ____________________ 106 * CAL_DONE ___________| 107 * | 400us | 108 */ 109 110 /* Make sure PHY Calibration is ready */ 111 ret = wait_for_reg(base + PHY_28NM_HSIC_IMPCAL_CAL, 112 PHY_28NM_HSIC_H2S_IMPCAL_DONE, 100); 113 if (ret) { 114 dev_warn(&pdev->dev, "HSIC PHY READY not set after 100mS."); 115 return ret; 116 } 117 118 /* Waiting for HSIC connect int*/ 119 ret = wait_for_reg(base + PHY_28NM_HSIC_INT, 120 PHY_28NM_HSIC_CONNECT_INT, 200); 121 if (ret) 122 dev_warn(&pdev->dev, "HSIC wait for connect interrupt timeout."); 123 124 return ret; 125 } 126 127 static int mv_hsic_phy_power_off(struct phy *phy) 128 { 129 struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy); 130 void __iomem *base = mv_phy->base; 131 132 writel(readl(base + PHY_28NM_HSIC_CTRL) & ~PHY_28NM_HSIC_S2H_HSIC_EN, 133 base + PHY_28NM_HSIC_CTRL); 134 135 return 0; 136 } 137 138 static int mv_hsic_phy_exit(struct phy *phy) 139 { 140 struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy); 141 void __iomem *base = mv_phy->base; 142 143 /* Turn off PLL */ 144 writel(readl(base + PHY_28NM_HSIC_PLL_CTRL2) & 145 ~PHY_28NM_HSIC_S2H_PU_PLL, 146 base + PHY_28NM_HSIC_PLL_CTRL2); 147 148 clk_disable_unprepare(mv_phy->clk); 149 return 0; 150 } 151 152 153 static const struct phy_ops hsic_ops = { 154 .init = mv_hsic_phy_init, 155 .power_on = mv_hsic_phy_power_on, 156 .power_off = mv_hsic_phy_power_off, 157 .exit = mv_hsic_phy_exit, 158 .owner = THIS_MODULE, 159 }; 160 161 static int mv_hsic_phy_probe(struct platform_device *pdev) 162 { 163 struct phy_provider *phy_provider; 164 struct mv_hsic_phy *mv_phy; 165 166 mv_phy = devm_kzalloc(&pdev->dev, sizeof(*mv_phy), GFP_KERNEL); 167 if (!mv_phy) 168 return -ENOMEM; 169 170 mv_phy->pdev = pdev; 171 172 mv_phy->clk = devm_clk_get(&pdev->dev, NULL); 173 if (IS_ERR(mv_phy->clk)) { 174 dev_err(&pdev->dev, "failed to get clock.\n"); 175 return PTR_ERR(mv_phy->clk); 176 } 177 178 mv_phy->base = devm_platform_ioremap_resource(pdev, 0); 179 if (IS_ERR(mv_phy->base)) 180 return PTR_ERR(mv_phy->base); 181 182 mv_phy->phy = devm_phy_create(&pdev->dev, pdev->dev.of_node, &hsic_ops); 183 if (IS_ERR(mv_phy->phy)) 184 return PTR_ERR(mv_phy->phy); 185 186 phy_set_drvdata(mv_phy->phy, mv_phy); 187 188 phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); 189 return PTR_ERR_OR_ZERO(phy_provider); 190 } 191 192 static const struct of_device_id mv_hsic_phy_dt_match[] = { 193 { .compatible = "marvell,pxa1928-hsic-phy", }, 194 {}, 195 }; 196 MODULE_DEVICE_TABLE(of, mv_hsic_phy_dt_match); 197 198 static struct platform_driver mv_hsic_phy_driver = { 199 .probe = mv_hsic_phy_probe, 200 .driver = { 201 .name = "mv-hsic-phy", 202 .of_match_table = mv_hsic_phy_dt_match, 203 }, 204 }; 205 module_platform_driver(mv_hsic_phy_driver); 206 207 MODULE_AUTHOR("Rob Herring <robh@kernel.org>"); 208 MODULE_DESCRIPTION("Marvell HSIC phy driver"); 209 MODULE_LICENSE("GPL v2"); 210