1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2011 Marvell International Ltd. All rights reserved. 4 * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk> 5 */ 6 7 #include <linux/delay.h> 8 #include <linux/io.h> 9 #include <linux/mod_devicetable.h> 10 #include <linux/module.h> 11 #include <linux/phy/phy.h> 12 #include <linux/platform_device.h> 13 #include <linux/soc/mmp/cputype.h> 14 15 #define USB2_PLL_REG0 0x4 16 #define USB2_PLL_REG1 0x8 17 #define USB2_TX_REG0 0x10 18 #define USB2_TX_REG1 0x14 19 #define USB2_TX_REG2 0x18 20 #define USB2_RX_REG0 0x20 21 #define USB2_RX_REG1 0x24 22 #define USB2_RX_REG2 0x28 23 #define USB2_ANA_REG0 0x30 24 #define USB2_ANA_REG1 0x34 25 #define USB2_ANA_REG2 0x38 26 #define USB2_DIG_REG0 0x3C 27 #define USB2_DIG_REG1 0x40 28 #define USB2_DIG_REG2 0x44 29 #define USB2_DIG_REG3 0x48 30 #define USB2_TEST_REG0 0x4C 31 #define USB2_TEST_REG1 0x50 32 #define USB2_TEST_REG2 0x54 33 #define USB2_CHARGER_REG0 0x58 34 #define USB2_OTG_REG0 0x5C 35 #define USB2_PHY_MON0 0x60 36 #define USB2_RESETVE_REG0 0x64 37 #define USB2_ICID_REG0 0x78 38 #define USB2_ICID_REG1 0x7C 39 40 /* USB2_PLL_REG0 */ 41 42 /* This is for Ax stepping */ 43 #define USB2_PLL_FBDIV_SHIFT_MMP3 0 44 #define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0) 45 46 #define USB2_PLL_REFDIV_SHIFT_MMP3 8 47 #define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8) 48 49 #define USB2_PLL_VDD12_SHIFT_MMP3 12 50 #define USB2_PLL_VDD18_SHIFT_MMP3 14 51 52 /* This is for B0 stepping */ 53 #define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0 54 #define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9 55 #define USB2_PLL_VDD18_SHIFT_MMP3_B0 14 56 #define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF 57 #define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00 58 59 #define USB2_PLL_CAL12_SHIFT_MMP3 0 60 #define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0) 61 62 #define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2 63 64 #define USB2_PLL_KVCO_SHIFT_MMP3 4 65 #define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4) 66 67 #define USB2_PLL_ICP_SHIFT_MMP3 8 68 #define USB2_PLL_ICP_MASK_MMP3 (0x7<<8) 69 70 #define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12 71 72 #define USB2_PLL_PU_PLL_SHIFT_MMP3 13 73 #define USB2_PLL_PU_PLL_MASK (0x1 << 13) 74 75 #define USB2_PLL_READY_MASK_MMP3 (0x1 << 15) 76 77 /* USB2_TX_REG0 */ 78 #define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8 79 #define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8) 80 81 #define USB2_TX_RCAL_START_SHIFT_MMP3 13 82 83 /* USB2_TX_REG1 */ 84 #define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0 85 #define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0) 86 87 #define USB2_TX_AMP_SHIFT_MMP3 4 88 #define USB2_TX_AMP_MASK_MMP3 (0x7 << 4) 89 90 #define USB2_TX_VDD12_SHIFT_MMP3 8 91 #define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8) 92 93 /* USB2_TX_REG2 */ 94 #define USB2_TX_DRV_SLEWRATE_SHIFT 10 95 96 /* USB2_RX_REG0 */ 97 #define USB2_RX_SQ_THRESH_SHIFT_MMP3 4 98 #define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4) 99 100 #define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10 101 #define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10) 102 103 /* USB2_ANA_REG1*/ 104 #define USB2_ANA_PU_ANA_SHIFT_MMP3 14 105 106 /* USB2_OTG_REG0 */ 107 #define USB2_OTG_PU_OTG_SHIFT_MMP3 3 108 109 struct mmp3_usb_phy { 110 struct phy *phy; 111 void __iomem *base; 112 }; 113 114 static unsigned int u2o_get(void __iomem *base, unsigned int offset) 115 { 116 return readl_relaxed(base + offset); 117 } 118 119 static void u2o_set(void __iomem *base, unsigned int offset, 120 unsigned int value) 121 { 122 u32 reg; 123 124 reg = readl_relaxed(base + offset); 125 reg |= value; 126 writel_relaxed(reg, base + offset); 127 readl_relaxed(base + offset); 128 } 129 130 static void u2o_clear(void __iomem *base, unsigned int offset, 131 unsigned int value) 132 { 133 u32 reg; 134 135 reg = readl_relaxed(base + offset); 136 reg &= ~value; 137 writel_relaxed(reg, base + offset); 138 readl_relaxed(base + offset); 139 } 140 141 static int mmp3_usb_phy_init(struct phy *phy) 142 { 143 struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy); 144 void __iomem *base = mmp3_usb_phy->base; 145 146 if (cpu_is_mmp3_a0()) { 147 u2o_clear(base, USB2_PLL_REG0, (USB2_PLL_FBDIV_MASK_MMP3 148 | USB2_PLL_REFDIV_MASK_MMP3)); 149 u2o_set(base, USB2_PLL_REG0, 150 0xd << USB2_PLL_REFDIV_SHIFT_MMP3 151 | 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3); 152 } else if (cpu_is_mmp3_b0()) { 153 u2o_clear(base, USB2_PLL_REG0, USB2_PLL_REFDIV_MASK_MMP3_B0 154 | USB2_PLL_FBDIV_MASK_MMP3_B0); 155 u2o_set(base, USB2_PLL_REG0, 156 0xd << USB2_PLL_REFDIV_SHIFT_MMP3_B0 157 | 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3_B0); 158 } else { 159 dev_err(&phy->dev, "unsupported silicon revision\n"); 160 return -ENODEV; 161 } 162 163 u2o_clear(base, USB2_PLL_REG1, USB2_PLL_PU_PLL_MASK 164 | USB2_PLL_ICP_MASK_MMP3 165 | USB2_PLL_KVCO_MASK_MMP3 166 | USB2_PLL_CALI12_MASK_MMP3); 167 u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_PU_PLL_SHIFT_MMP3 168 | 1 << USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 169 | 3 << USB2_PLL_ICP_SHIFT_MMP3 170 | 3 << USB2_PLL_KVCO_SHIFT_MMP3 171 | 3 << USB2_PLL_CAL12_SHIFT_MMP3); 172 173 u2o_clear(base, USB2_TX_REG0, USB2_TX_IMPCAL_VTH_MASK_MMP3); 174 u2o_set(base, USB2_TX_REG0, 2 << USB2_TX_IMPCAL_VTH_SHIFT_MMP3); 175 176 u2o_clear(base, USB2_TX_REG1, USB2_TX_VDD12_MASK_MMP3 177 | USB2_TX_AMP_MASK_MMP3 178 | USB2_TX_CK60_PHSEL_MASK_MMP3); 179 u2o_set(base, USB2_TX_REG1, 3 << USB2_TX_VDD12_SHIFT_MMP3 180 | 4 << USB2_TX_AMP_SHIFT_MMP3 181 | 4 << USB2_TX_CK60_PHSEL_SHIFT_MMP3); 182 183 u2o_clear(base, USB2_TX_REG2, 3 << USB2_TX_DRV_SLEWRATE_SHIFT); 184 u2o_set(base, USB2_TX_REG2, 2 << USB2_TX_DRV_SLEWRATE_SHIFT); 185 186 u2o_clear(base, USB2_RX_REG0, USB2_RX_SQ_THRESH_MASK_MMP3); 187 u2o_set(base, USB2_RX_REG0, 0xa << USB2_RX_SQ_THRESH_SHIFT_MMP3); 188 189 u2o_set(base, USB2_ANA_REG1, 0x1 << USB2_ANA_PU_ANA_SHIFT_MMP3); 190 191 u2o_set(base, USB2_OTG_REG0, 0x1 << USB2_OTG_PU_OTG_SHIFT_MMP3); 192 193 return 0; 194 } 195 196 static int mmp3_usb_phy_calibrate(struct phy *phy) 197 { 198 struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy); 199 void __iomem *base = mmp3_usb_phy->base; 200 int loops; 201 202 /* 203 * PLL VCO and TX Impedance Calibration Timing: 204 * 205 * _____________________________________ 206 * PU __________| 207 * _____________________________ 208 * VCOCAL START _________| 209 * ___ 210 * REG_RCAL_START ________________| |________|_______ 211 * | 200us | 400us | 40| 400us | USB PHY READY 212 */ 213 214 udelay(200); 215 u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_VCOCAL_START_SHIFT_MMP3); 216 udelay(400); 217 u2o_set(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3); 218 udelay(40); 219 u2o_clear(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3); 220 udelay(400); 221 222 loops = 0; 223 while ((u2o_get(base, USB2_PLL_REG1) & USB2_PLL_READY_MASK_MMP3) == 0) { 224 mdelay(1); 225 loops++; 226 if (loops > 100) { 227 dev_err(&phy->dev, "PLL_READY not set after 100mS.\n"); 228 return -ETIMEDOUT; 229 } 230 } 231 232 return 0; 233 } 234 235 static const struct phy_ops mmp3_usb_phy_ops = { 236 .init = mmp3_usb_phy_init, 237 .calibrate = mmp3_usb_phy_calibrate, 238 .owner = THIS_MODULE, 239 }; 240 241 static const struct of_device_id mmp3_usb_phy_of_match[] = { 242 { .compatible = "marvell,mmp3-usb-phy", }, 243 { }, 244 }; 245 MODULE_DEVICE_TABLE(of, mmp3_usb_phy_of_match); 246 247 static int mmp3_usb_phy_probe(struct platform_device *pdev) 248 { 249 struct device *dev = &pdev->dev; 250 struct mmp3_usb_phy *mmp3_usb_phy; 251 struct phy_provider *provider; 252 253 mmp3_usb_phy = devm_kzalloc(dev, sizeof(*mmp3_usb_phy), GFP_KERNEL); 254 if (!mmp3_usb_phy) 255 return -ENOMEM; 256 257 mmp3_usb_phy->base = devm_platform_ioremap_resource(pdev, 0); 258 if (IS_ERR(mmp3_usb_phy->base)) { 259 dev_err(dev, "failed to remap PHY regs\n"); 260 return PTR_ERR(mmp3_usb_phy->base); 261 } 262 263 mmp3_usb_phy->phy = devm_phy_create(dev, NULL, &mmp3_usb_phy_ops); 264 if (IS_ERR(mmp3_usb_phy->phy)) { 265 dev_err(dev, "failed to create PHY\n"); 266 return PTR_ERR(mmp3_usb_phy->phy); 267 } 268 269 phy_set_drvdata(mmp3_usb_phy->phy, mmp3_usb_phy); 270 provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); 271 if (IS_ERR(provider)) { 272 dev_err(dev, "failed to register PHY provider\n"); 273 return PTR_ERR(provider); 274 } 275 276 return 0; 277 } 278 279 static struct platform_driver mmp3_usb_phy_driver = { 280 .probe = mmp3_usb_phy_probe, 281 .driver = { 282 .name = "mmp3-usb-phy", 283 .of_match_table = mmp3_usb_phy_of_match, 284 }, 285 }; 286 module_platform_driver(mmp3_usb_phy_driver); 287 288 MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); 289 MODULE_DESCRIPTION("Marvell MMP3 USB PHY Driver"); 290 MODULE_LICENSE("GPL v2"); 291