1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * phy-brcm-usb-init.c - Broadcom USB Phy chip specific init functions 4 * 5 * Copyright (C) 2014-2017 Broadcom 6 */ 7 8 /* 9 * This module contains USB PHY initialization for power up and S3 resume 10 */ 11 12 #include <linux/delay.h> 13 #include <linux/io.h> 14 15 #include <linux/soc/brcmstb/brcmstb.h> 16 #include "phy-brcm-usb-init.h" 17 18 #define PHY_PORTS 2 19 #define PHY_PORT_SELECT_0 0 20 #define PHY_PORT_SELECT_1 0x1000 21 22 /* Register definitions for the USB CTRL block */ 23 #define USB_CTRL_SETUP 0x00 24 #define USB_CTRL_SETUP_BABO_MASK BIT(0) 25 #define USB_CTRL_SETUP_FNHW_MASK BIT(1) 26 #define USB_CTRL_SETUP_FNBO_MASK BIT(2) 27 #define USB_CTRL_SETUP_WABO_MASK BIT(3) 28 #define USB_CTRL_SETUP_IOC_MASK BIT(4) 29 #define USB_CTRL_SETUP_IPP_MASK BIT(5) 30 #define USB_CTRL_SETUP_SCB_CLIENT_SWAP_MASK BIT(13) /* option */ 31 #define USB_CTRL_SETUP_SCB1_EN_MASK BIT(14) /* option */ 32 #define USB_CTRL_SETUP_SCB2_EN_MASK BIT(15) /* option */ 33 #define USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK BIT(17) /* option */ 34 #define USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK BIT(16) /* option */ 35 #define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK BIT(25) /* option */ 36 #define USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK BIT(26) /* option */ 37 #define USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK BIT(27) /* opt */ 38 #define USB_CTRL_SETUP_OC_DISABLE_PORT0_MASK BIT(28) 39 #define USB_CTRL_SETUP_OC_DISABLE_PORT1_MASK BIT(29) 40 #define USB_CTRL_SETUP_OC_DISABLE_MASK GENMASK(29, 28) /* option */ 41 #define USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK BIT(30) 42 #define USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK BIT(31) 43 #define USB_CTRL_SETUP_OC3_DISABLE_MASK GENMASK(31, 30) /* option */ 44 #define USB_CTRL_PLL_CTL 0x04 45 #define USB_CTRL_PLL_CTL_PLL_SUSPEND_EN_MASK BIT(27) 46 #define USB_CTRL_PLL_CTL_PLL_RESETB_MASK BIT(30) 47 #define USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK BIT(31) /* option */ 48 #define USB_CTRL_EBRIDGE 0x0c 49 #define USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK GENMASK(11, 7) /* option */ 50 #define USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK BIT(17) /* option */ 51 #define USB_CTRL_OBRIDGE 0x10 52 #define USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK BIT(27) 53 #define USB_CTRL_MDIO 0x14 54 #define USB_CTRL_MDIO2 0x18 55 #define USB_CTRL_UTMI_CTL_1 0x2c 56 #define USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_MASK BIT(11) 57 #define USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_P1_MASK BIT(27) 58 #define USB_CTRL_USB_PM 0x34 59 #define USB_CTRL_USB_PM_RMTWKUP_EN_MASK BIT(0) 60 #define USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK GENMASK(21, 20) /* option */ 61 #define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK BIT(22) /* option */ 62 #define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK BIT(23) /* option */ 63 #define USB_CTRL_USB_PM_USB20_HC_RESETB_MASK GENMASK(29, 28) /* option */ 64 #define USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK BIT(30) /* option */ 65 #define USB_CTRL_USB_PM_SOFT_RESET_MASK BIT(30) /* option */ 66 #define USB_CTRL_USB_PM_USB_PWRDN_MASK BIT(31) /* option */ 67 #define USB_CTRL_USB_PM_STATUS 0x38 68 #define USB_CTRL_USB30_CTL1 0x60 69 #define USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK BIT(4) 70 #define USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK BIT(16) 71 #define USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK BIT(17) /* option */ 72 #define USB_CTRL_USB30_CTL1_USB3_IOC_MASK BIT(28) /* option */ 73 #define USB_CTRL_USB30_CTL1_USB3_IPP_MASK BIT(29) /* option */ 74 #define USB_CTRL_USB30_PCTL 0x70 75 #define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_MASK BIT(1) 76 #define USB_CTRL_USB30_PCTL_PHY3_IDDQ_OVERRIDE_MASK BIT(15) 77 #define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_P1_MASK BIT(17) 78 #define USB_CTRL_USB_DEVICE_CTL1 0x90 79 #define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK GENMASK(1, 0) /* option */ 80 81 /* Register definitions for the XHCI EC block */ 82 #define USB_XHCI_EC_IRAADR 0x658 83 #define USB_XHCI_EC_IRADAT 0x65c 84 85 enum brcm_family_type { 86 BRCM_FAMILY_3390A0, 87 BRCM_FAMILY_4908, 88 BRCM_FAMILY_7250B0, 89 BRCM_FAMILY_7271A0, 90 BRCM_FAMILY_7364A0, 91 BRCM_FAMILY_7366C0, 92 BRCM_FAMILY_74371A0, 93 BRCM_FAMILY_7439B0, 94 BRCM_FAMILY_7445D0, 95 BRCM_FAMILY_7260A0, 96 BRCM_FAMILY_7278A0, 97 BRCM_FAMILY_COUNT, 98 }; 99 100 #define USB_BRCM_FAMILY(chip) \ 101 [BRCM_FAMILY_##chip] = __stringify(chip) 102 103 static const char *family_names[BRCM_FAMILY_COUNT] = { 104 USB_BRCM_FAMILY(3390A0), 105 USB_BRCM_FAMILY(4908), 106 USB_BRCM_FAMILY(7250B0), 107 USB_BRCM_FAMILY(7271A0), 108 USB_BRCM_FAMILY(7364A0), 109 USB_BRCM_FAMILY(7366C0), 110 USB_BRCM_FAMILY(74371A0), 111 USB_BRCM_FAMILY(7439B0), 112 USB_BRCM_FAMILY(7445D0), 113 USB_BRCM_FAMILY(7260A0), 114 USB_BRCM_FAMILY(7278A0), 115 }; 116 117 enum { 118 USB_CTRL_SETUP_SCB1_EN_SELECTOR, 119 USB_CTRL_SETUP_SCB2_EN_SELECTOR, 120 USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR, 121 USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR, 122 USB_CTRL_SETUP_OC3_DISABLE_PORT0_SELECTOR, 123 USB_CTRL_SETUP_OC3_DISABLE_PORT1_SELECTOR, 124 USB_CTRL_SETUP_OC3_DISABLE_SELECTOR, 125 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR, 126 USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR, 127 USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR, 128 USB_CTRL_USB_PM_USB_PWRDN_SELECTOR, 129 USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_SELECTOR, 130 USB_CTRL_USB30_CTL1_USB3_IOC_SELECTOR, 131 USB_CTRL_USB30_CTL1_USB3_IPP_SELECTOR, 132 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_SELECTOR, 133 USB_CTRL_USB_PM_SOFT_RESET_SELECTOR, 134 USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_SELECTOR, 135 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_SELECTOR, 136 USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR, 137 USB_CTRL_SETUP_ENDIAN_SELECTOR, 138 USB_CTRL_SELECTOR_COUNT, 139 }; 140 141 #define USB_CTRL_MASK_FAMILY(params, reg, field) \ 142 (params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR]) 143 144 #define USB_CTRL_SET_FAMILY(params, reg, field) \ 145 usb_ctrl_set_family(params, USB_CTRL_##reg, \ 146 USB_CTRL_##reg##_##field##_SELECTOR) 147 #define USB_CTRL_UNSET_FAMILY(params, reg, field) \ 148 usb_ctrl_unset_family(params, USB_CTRL_##reg, \ 149 USB_CTRL_##reg##_##field##_SELECTOR) 150 151 #define MDIO_USB2 0 152 #define MDIO_USB3 BIT(31) 153 154 #define USB_CTRL_SETUP_ENDIAN_BITS ( \ 155 USB_CTRL_MASK(SETUP, BABO) | \ 156 USB_CTRL_MASK(SETUP, FNHW) | \ 157 USB_CTRL_MASK(SETUP, FNBO) | \ 158 USB_CTRL_MASK(SETUP, WABO)) 159 160 #ifdef __LITTLE_ENDIAN 161 #define ENDIAN_SETTINGS ( \ 162 USB_CTRL_MASK(SETUP, BABO) | \ 163 USB_CTRL_MASK(SETUP, FNHW)) 164 #else 165 #define ENDIAN_SETTINGS ( \ 166 USB_CTRL_MASK(SETUP, FNHW) | \ 167 USB_CTRL_MASK(SETUP, FNBO) | \ 168 USB_CTRL_MASK(SETUP, WABO)) 169 #endif 170 171 struct id_to_type { 172 u32 id; 173 int type; 174 }; 175 176 static const struct id_to_type id_to_type_table[] = { 177 { 0x33900000, BRCM_FAMILY_3390A0 }, 178 { 0x72500010, BRCM_FAMILY_7250B0 }, 179 { 0x72600000, BRCM_FAMILY_7260A0 }, 180 { 0x72550000, BRCM_FAMILY_7260A0 }, 181 { 0x72680000, BRCM_FAMILY_7271A0 }, 182 { 0x72710000, BRCM_FAMILY_7271A0 }, 183 { 0x73640000, BRCM_FAMILY_7364A0 }, 184 { 0x73660020, BRCM_FAMILY_7366C0 }, 185 { 0x07437100, BRCM_FAMILY_74371A0 }, 186 { 0x74390010, BRCM_FAMILY_7439B0 }, 187 { 0x74450030, BRCM_FAMILY_7445D0 }, 188 { 0x72780000, BRCM_FAMILY_7278A0 }, 189 { 0, BRCM_FAMILY_7271A0 }, /* default */ 190 }; 191 192 static const u32 193 usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = { 194 /* 3390B0 */ 195 [BRCM_FAMILY_3390A0] = { 196 [USB_CTRL_SETUP_SCB1_EN_SELECTOR] = 197 USB_CTRL_SETUP_SCB1_EN_MASK, 198 [USB_CTRL_SETUP_SCB2_EN_SELECTOR] = 199 USB_CTRL_SETUP_SCB2_EN_MASK, 200 [USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR] = 201 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 202 [USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR] = 203 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 204 [USB_CTRL_SETUP_OC3_DISABLE_PORT0_SELECTOR] = 205 USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK, 206 [USB_CTRL_SETUP_OC3_DISABLE_PORT1_SELECTOR] = 207 USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK, 208 [USB_CTRL_SETUP_OC3_DISABLE_SELECTOR] = 209 USB_CTRL_SETUP_OC3_DISABLE_MASK, 210 [USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR] = 211 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 212 [USB_CTRL_USB_PM_USB_PWRDN_SELECTOR] = 213 USB_CTRL_USB_PM_USB_PWRDN_MASK, 214 [USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_SELECTOR] = 215 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 216 [USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR] = 217 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 218 [USB_CTRL_SETUP_ENDIAN_SELECTOR] = ENDIAN_SETTINGS, 219 }, 220 /* 4908 */ 221 [BRCM_FAMILY_4908] = { 222 [USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR] = 223 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 224 [USB_CTRL_USB_PM_USB_PWRDN_SELECTOR] = 225 USB_CTRL_USB_PM_USB_PWRDN_MASK, 226 }, 227 /* 7250b0 */ 228 [BRCM_FAMILY_7250B0] = { 229 [USB_CTRL_SETUP_SCB1_EN_SELECTOR] = 230 USB_CTRL_SETUP_SCB1_EN_MASK, 231 [USB_CTRL_SETUP_SCB2_EN_SELECTOR] = 232 USB_CTRL_SETUP_SCB2_EN_MASK, 233 [USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR] = 234 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 235 [USB_CTRL_SETUP_OC3_DISABLE_PORT0_SELECTOR] = 236 USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK, 237 [USB_CTRL_SETUP_OC3_DISABLE_PORT1_SELECTOR] = 238 USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK, 239 [USB_CTRL_SETUP_OC3_DISABLE_SELECTOR] = 240 USB_CTRL_SETUP_OC3_DISABLE_MASK, 241 [USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR] = 242 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, 243 [USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR] = 244 USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, 245 [USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR] = 246 USB_CTRL_USB_PM_USB20_HC_RESETB_MASK, 247 [USB_CTRL_SETUP_ENDIAN_SELECTOR] = ENDIAN_SETTINGS, 248 }, 249 /* 7271a0 */ 250 [BRCM_FAMILY_7271A0] = { 251 [USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR] = 252 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 253 [USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR] = 254 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 255 [USB_CTRL_SETUP_OC3_DISABLE_PORT0_SELECTOR] = 256 USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK, 257 [USB_CTRL_SETUP_OC3_DISABLE_PORT1_SELECTOR] = 258 USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK, 259 [USB_CTRL_SETUP_OC3_DISABLE_SELECTOR] = 260 USB_CTRL_SETUP_OC3_DISABLE_MASK, 261 [USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR] = 262 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, 263 [USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR] = 264 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 265 [USB_CTRL_USB_PM_USB_PWRDN_SELECTOR] = 266 USB_CTRL_USB_PM_USB_PWRDN_MASK, 267 [USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_SELECTOR] = 268 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 269 [USB_CTRL_USB_PM_SOFT_RESET_SELECTOR] = 270 USB_CTRL_USB_PM_SOFT_RESET_MASK, 271 [USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_SELECTOR] = 272 USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK, 273 [USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_SELECTOR] = 274 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK, 275 [USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR] = 276 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 277 [USB_CTRL_SETUP_ENDIAN_SELECTOR] = ENDIAN_SETTINGS, 278 }, 279 /* 7364a0 */ 280 [BRCM_FAMILY_7364A0] = { 281 [USB_CTRL_SETUP_SCB1_EN_SELECTOR] = 282 USB_CTRL_SETUP_SCB1_EN_MASK, 283 [USB_CTRL_SETUP_SCB2_EN_SELECTOR] = 284 USB_CTRL_SETUP_SCB2_EN_MASK, 285 [USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR] = 286 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 287 [USB_CTRL_SETUP_OC3_DISABLE_PORT0_SELECTOR] = 288 USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK, 289 [USB_CTRL_SETUP_OC3_DISABLE_PORT1_SELECTOR] = 290 USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK, 291 [USB_CTRL_SETUP_OC3_DISABLE_SELECTOR] = 292 USB_CTRL_SETUP_OC3_DISABLE_MASK, 293 [USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR] = 294 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, 295 [USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR] = 296 USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, 297 [USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR] = 298 USB_CTRL_USB_PM_USB20_HC_RESETB_MASK, 299 [USB_CTRL_SETUP_ENDIAN_SELECTOR] = ENDIAN_SETTINGS, 300 }, 301 /* 7366c0 */ 302 [BRCM_FAMILY_7366C0] = { 303 [USB_CTRL_SETUP_SCB1_EN_SELECTOR] = 304 USB_CTRL_SETUP_SCB1_EN_MASK, 305 [USB_CTRL_SETUP_SCB2_EN_SELECTOR] = 306 USB_CTRL_SETUP_SCB2_EN_MASK, 307 [USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR] = 308 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 309 [USB_CTRL_SETUP_OC3_DISABLE_PORT0_SELECTOR] = 310 USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK, 311 [USB_CTRL_SETUP_OC3_DISABLE_PORT1_SELECTOR] = 312 USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK, 313 [USB_CTRL_SETUP_OC3_DISABLE_SELECTOR] = 314 USB_CTRL_SETUP_OC3_DISABLE_MASK, 315 [USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR] = 316 USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, 317 [USB_CTRL_USB_PM_USB_PWRDN_SELECTOR] = 318 USB_CTRL_USB_PM_USB_PWRDN_MASK, 319 [USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR] = 320 USB_CTRL_USB_PM_USB20_HC_RESETB_MASK, 321 [USB_CTRL_SETUP_ENDIAN_SELECTOR] = ENDIAN_SETTINGS, 322 }, 323 /* 74371A0 */ 324 [BRCM_FAMILY_74371A0] = { 325 [USB_CTRL_SETUP_SCB1_EN_SELECTOR] = 326 USB_CTRL_SETUP_SCB1_EN_MASK, 327 [USB_CTRL_SETUP_SCB2_EN_SELECTOR] = 328 USB_CTRL_SETUP_SCB2_EN_MASK, 329 [USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR] = 330 USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK, 331 [USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR] = 332 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, 333 [USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_SELECTOR] = 334 USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK, 335 [USB_CTRL_USB30_CTL1_USB3_IOC_SELECTOR] = 336 USB_CTRL_USB30_CTL1_USB3_IOC_MASK, 337 [USB_CTRL_USB30_CTL1_USB3_IPP_SELECTOR] = 338 USB_CTRL_USB30_CTL1_USB3_IPP_MASK, 339 [USB_CTRL_SETUP_ENDIAN_SELECTOR] = ENDIAN_SETTINGS, 340 }, 341 /* 7439B0 */ 342 [BRCM_FAMILY_7439B0] = { 343 [USB_CTRL_SETUP_SCB1_EN_SELECTOR] = 344 USB_CTRL_SETUP_SCB1_EN_MASK, 345 [USB_CTRL_SETUP_SCB2_EN_SELECTOR] = 346 USB_CTRL_SETUP_SCB2_EN_MASK, 347 [USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR] = 348 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 349 [USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR] = 350 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 351 [USB_CTRL_SETUP_OC3_DISABLE_PORT0_SELECTOR] = 352 USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK, 353 [USB_CTRL_SETUP_OC3_DISABLE_PORT1_SELECTOR] = 354 USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK, 355 [USB_CTRL_SETUP_OC3_DISABLE_SELECTOR] = 356 USB_CTRL_SETUP_OC3_DISABLE_MASK, 357 [USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR] = 358 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, 359 [USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR] = 360 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 361 [USB_CTRL_USB_PM_USB_PWRDN_SELECTOR] = 362 USB_CTRL_USB_PM_USB_PWRDN_MASK, 363 [USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_SELECTOR] = 364 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 365 [USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR] = 366 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 367 [USB_CTRL_SETUP_ENDIAN_SELECTOR] = ENDIAN_SETTINGS, 368 }, 369 /* 7445d0 */ 370 [BRCM_FAMILY_7445D0] = { 371 [USB_CTRL_SETUP_SCB1_EN_SELECTOR] = 372 USB_CTRL_SETUP_SCB1_EN_MASK, 373 [USB_CTRL_SETUP_SCB2_EN_SELECTOR] = 374 USB_CTRL_SETUP_SCB2_EN_MASK, 375 [USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR] = 376 USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK, 377 [USB_CTRL_SETUP_OC3_DISABLE_PORT0_SELECTOR] = 378 USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK, 379 [USB_CTRL_SETUP_OC3_DISABLE_PORT1_SELECTOR] = 380 USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK, 381 [USB_CTRL_SETUP_OC3_DISABLE_SELECTOR] = 382 USB_CTRL_SETUP_OC3_DISABLE_MASK, 383 [USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR] = 384 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, 385 [USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_SELECTOR] = 386 USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK, 387 [USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR] = 388 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 389 [USB_CTRL_SETUP_ENDIAN_SELECTOR] = ENDIAN_SETTINGS, 390 }, 391 /* 7260a0 */ 392 [BRCM_FAMILY_7260A0] = { 393 [USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR] = 394 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 395 [USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR] = 396 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 397 [USB_CTRL_SETUP_OC3_DISABLE_PORT0_SELECTOR] = 398 USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK, 399 [USB_CTRL_SETUP_OC3_DISABLE_PORT1_SELECTOR] = 400 USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK, 401 [USB_CTRL_SETUP_OC3_DISABLE_SELECTOR] = 402 USB_CTRL_SETUP_OC3_DISABLE_MASK, 403 [USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR] = 404 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, 405 [USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR] = 406 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 407 [USB_CTRL_USB_PM_USB_PWRDN_SELECTOR] = 408 USB_CTRL_USB_PM_USB_PWRDN_MASK, 409 [USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_SELECTOR] = 410 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 411 [USB_CTRL_USB_PM_SOFT_RESET_SELECTOR] = 412 USB_CTRL_USB_PM_SOFT_RESET_MASK, 413 [USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_SELECTOR] = 414 USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK, 415 [USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_SELECTOR] = 416 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK, 417 [USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR] = 418 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 419 [USB_CTRL_SETUP_ENDIAN_SELECTOR] = ENDIAN_SETTINGS, 420 }, 421 /* 7278a0 */ 422 [BRCM_FAMILY_7278A0] = { 423 [USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR] = 424 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 425 [USB_CTRL_SETUP_OC3_DISABLE_PORT0_SELECTOR] = 426 USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK, 427 [USB_CTRL_SETUP_OC3_DISABLE_PORT1_SELECTOR] = 428 USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK, 429 [USB_CTRL_SETUP_OC3_DISABLE_SELECTOR] = 430 USB_CTRL_SETUP_OC3_DISABLE_MASK, 431 [USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR] = 432 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, 433 [USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR] = 434 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 435 [USB_CTRL_USB_PM_USB_PWRDN_SELECTOR] = 436 USB_CTRL_USB_PM_USB_PWRDN_MASK, 437 [USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_SELECTOR] = 438 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 439 [USB_CTRL_USB_PM_SOFT_RESET_SELECTOR] = 440 USB_CTRL_USB_PM_SOFT_RESET_MASK, 441 }, 442 }; 443 444 static inline 445 void usb_ctrl_unset_family(struct brcm_usb_init_params *params, 446 u32 reg_offset, u32 field) 447 { 448 u32 mask; 449 450 mask = params->usb_reg_bits_map[field]; 451 brcm_usb_ctrl_unset(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); 452 }; 453 454 static inline 455 void usb_ctrl_set_family(struct brcm_usb_init_params *params, 456 u32 reg_offset, u32 field) 457 { 458 u32 mask; 459 460 mask = params->usb_reg_bits_map[field]; 461 brcm_usb_ctrl_set(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); 462 }; 463 464 static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode) 465 { 466 u32 data; 467 468 data = (reg << 16) | mode; 469 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 470 data |= (1 << 24); 471 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 472 data &= ~(1 << 24); 473 /* wait for the 60MHz parallel to serial shifter */ 474 usleep_range(10, 20); 475 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 476 /* wait for the 60MHz parallel to serial shifter */ 477 usleep_range(10, 20); 478 479 return brcm_usb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; 480 } 481 482 static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg, 483 u32 val, int mode) 484 { 485 u32 data; 486 487 data = (reg << 16) | val | mode; 488 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 489 data |= (1 << 25); 490 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 491 data &= ~(1 << 25); 492 493 /* wait for the 60MHz parallel to serial shifter */ 494 usleep_range(10, 20); 495 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 496 /* wait for the 60MHz parallel to serial shifter */ 497 usleep_range(10, 20); 498 } 499 500 static void brcmusb_usb_phy_ldo_fix(void __iomem *ctrl_base) 501 { 502 /* first disable FSM but also leave it that way */ 503 /* to allow normal suspend/resume */ 504 USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN); 505 USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN_P1); 506 507 /* reset USB 2.0 PLL */ 508 USB_CTRL_UNSET(ctrl_base, PLL_CTL, PLL_RESETB); 509 /* PLL reset period */ 510 udelay(1); 511 USB_CTRL_SET(ctrl_base, PLL_CTL, PLL_RESETB); 512 /* Give PLL enough time to lock */ 513 usleep_range(1000, 2000); 514 } 515 516 static void brcmusb_usb2_eye_fix(void __iomem *ctrl_base) 517 { 518 /* Increase USB 2.0 TX level to meet spec requirement */ 519 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x80a0, MDIO_USB2); 520 brcmusb_usb_mdio_write(ctrl_base, 0x0a, 0xc6a0, MDIO_USB2); 521 } 522 523 static void brcmusb_usb3_pll_fix(void __iomem *ctrl_base) 524 { 525 /* Set correct window for PLL lock detect */ 526 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3); 527 brcmusb_usb_mdio_write(ctrl_base, 0x07, 0x1503, MDIO_USB3); 528 } 529 530 static void brcmusb_usb3_enable_pipe_reset(void __iomem *ctrl_base) 531 { 532 u32 val; 533 534 /* Re-enable USB 3.0 pipe reset */ 535 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3); 536 val = brcmusb_usb_mdio_read(ctrl_base, 0x0f, MDIO_USB3) | 0x200; 537 brcmusb_usb_mdio_write(ctrl_base, 0x0f, val, MDIO_USB3); 538 } 539 540 static void brcmusb_usb3_enable_sigdet(void __iomem *ctrl_base) 541 { 542 u32 val, ofs; 543 int ii; 544 545 ofs = 0; 546 for (ii = 0; ii < PHY_PORTS; ++ii) { 547 /* Set correct default for sigdet */ 548 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8080 + ofs), 549 MDIO_USB3); 550 val = brcmusb_usb_mdio_read(ctrl_base, 0x05, MDIO_USB3); 551 val = (val & ~0x800f) | 0x800d; 552 brcmusb_usb_mdio_write(ctrl_base, 0x05, val, MDIO_USB3); 553 ofs = PHY_PORT_SELECT_1; 554 } 555 } 556 557 static void brcmusb_usb3_enable_skip_align(void __iomem *ctrl_base) 558 { 559 u32 val, ofs; 560 int ii; 561 562 ofs = 0; 563 for (ii = 0; ii < PHY_PORTS; ++ii) { 564 /* Set correct default for SKIP align */ 565 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8060 + ofs), 566 MDIO_USB3); 567 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0x200; 568 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); 569 ofs = PHY_PORT_SELECT_1; 570 } 571 } 572 573 static void brcmusb_usb3_unfreeze_aeq(void __iomem *ctrl_base) 574 { 575 u32 val, ofs; 576 int ii; 577 578 ofs = 0; 579 for (ii = 0; ii < PHY_PORTS; ++ii) { 580 /* Let EQ freeze after TSEQ */ 581 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x80e0 + ofs), 582 MDIO_USB3); 583 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3); 584 val &= ~0x0008; 585 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); 586 ofs = PHY_PORT_SELECT_1; 587 } 588 } 589 590 static void brcmusb_usb3_pll_54mhz(struct brcm_usb_init_params *params) 591 { 592 u32 ofs; 593 int ii; 594 void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; 595 596 /* 597 * On newer B53 based SoC's, the reference clock for the 598 * 3.0 PLL has been changed from 50MHz to 54MHz so the 599 * PLL needs to be reprogrammed. 600 * See SWLINUX-4006. 601 * 602 * On the 7364C0, the reference clock for the 603 * 3.0 PLL has been changed from 50MHz to 54MHz to 604 * work around a MOCA issue. 605 * See SWLINUX-4169. 606 */ 607 switch (params->selected_family) { 608 case BRCM_FAMILY_3390A0: 609 case BRCM_FAMILY_4908: 610 case BRCM_FAMILY_7250B0: 611 case BRCM_FAMILY_7366C0: 612 case BRCM_FAMILY_74371A0: 613 case BRCM_FAMILY_7439B0: 614 case BRCM_FAMILY_7445D0: 615 case BRCM_FAMILY_7260A0: 616 return; 617 case BRCM_FAMILY_7364A0: 618 if (BRCM_REV(params->family_id) < 0x20) 619 return; 620 break; 621 } 622 623 /* set USB 3.0 PLL to accept 54Mhz reference clock */ 624 USB_CTRL_UNSET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START); 625 626 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3); 627 brcmusb_usb_mdio_write(ctrl_base, 0x10, 0x5784, MDIO_USB3); 628 brcmusb_usb_mdio_write(ctrl_base, 0x11, 0x01d0, MDIO_USB3); 629 brcmusb_usb_mdio_write(ctrl_base, 0x12, 0x1DE8, MDIO_USB3); 630 brcmusb_usb_mdio_write(ctrl_base, 0x13, 0xAA80, MDIO_USB3); 631 brcmusb_usb_mdio_write(ctrl_base, 0x14, 0x8826, MDIO_USB3); 632 brcmusb_usb_mdio_write(ctrl_base, 0x15, 0x0044, MDIO_USB3); 633 brcmusb_usb_mdio_write(ctrl_base, 0x16, 0x8000, MDIO_USB3); 634 brcmusb_usb_mdio_write(ctrl_base, 0x17, 0x0851, MDIO_USB3); 635 brcmusb_usb_mdio_write(ctrl_base, 0x18, 0x0000, MDIO_USB3); 636 637 /* both ports */ 638 ofs = 0; 639 for (ii = 0; ii < PHY_PORTS; ++ii) { 640 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8040 + ofs), 641 MDIO_USB3); 642 brcmusb_usb_mdio_write(ctrl_base, 0x03, 0x0090, MDIO_USB3); 643 brcmusb_usb_mdio_write(ctrl_base, 0x04, 0x0134, MDIO_USB3); 644 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8020 + ofs), 645 MDIO_USB3); 646 brcmusb_usb_mdio_write(ctrl_base, 0x01, 0x00e2, MDIO_USB3); 647 ofs = PHY_PORT_SELECT_1; 648 } 649 650 /* restart PLL sequence */ 651 USB_CTRL_SET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START); 652 /* Give PLL enough time to lock */ 653 usleep_range(1000, 2000); 654 } 655 656 static void brcmusb_usb3_ssc_enable(void __iomem *ctrl_base) 657 { 658 u32 val; 659 660 /* Enable USB 3.0 TX spread spectrum */ 661 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8040, MDIO_USB3); 662 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf; 663 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); 664 665 /* Currently, USB 3.0 SSC is enabled via port 0 MDIO registers, 666 * which should have been adequate. However, due to a bug in the 667 * USB 3.0 PHY, it must be enabled via both ports (HWUSB3DVT-26). 668 */ 669 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x9040, MDIO_USB3); 670 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf; 671 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); 672 } 673 674 static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params) 675 { 676 void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; 677 678 brcmusb_usb3_pll_fix(ctrl_base); 679 brcmusb_usb3_pll_54mhz(params); 680 brcmusb_usb3_ssc_enable(ctrl_base); 681 brcmusb_usb3_enable_pipe_reset(ctrl_base); 682 brcmusb_usb3_enable_sigdet(ctrl_base); 683 brcmusb_usb3_enable_skip_align(ctrl_base); 684 brcmusb_usb3_unfreeze_aeq(ctrl_base); 685 } 686 687 static void brcmusb_memc_fix(struct brcm_usb_init_params *params) 688 { 689 u32 prid; 690 691 if (params->selected_family != BRCM_FAMILY_7445D0) 692 return; 693 /* 694 * This is a workaround for HW7445-1869 where a DMA write ends up 695 * doing a read pre-fetch after the end of the DMA buffer. This 696 * causes a problem when the DMA buffer is at the end of physical 697 * memory, causing the pre-fetch read to access non-existent memory, 698 * and the chip bondout has MEMC2 disabled. When the pre-fetch read 699 * tries to use the disabled MEMC2, it hangs the bus. The workaround 700 * is to disable MEMC2 access in the usb controller which avoids 701 * the hang. 702 */ 703 704 prid = params->product_id & 0xfffff000; 705 switch (prid) { 706 case 0x72520000: 707 case 0x74480000: 708 case 0x74490000: 709 case 0x07252000: 710 case 0x07448000: 711 case 0x07449000: 712 USB_CTRL_UNSET_FAMILY(params, SETUP, SCB2_EN); 713 } 714 } 715 716 static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params) 717 { 718 void __iomem *xhci_ec_base = params->regs[BRCM_REGS_XHCI_EC]; 719 u32 val; 720 721 if (params->family_id != 0x74371000 || !xhci_ec_base) 722 return; 723 brcm_usb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR)); 724 val = brcm_usb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); 725 726 /* set cfg_pick_ss_lock */ 727 val |= (1 << 27); 728 brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); 729 730 /* Reset USB 3.0 PHY for workaround to take effect */ 731 USB_CTRL_UNSET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); 732 USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); 733 } 734 735 static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params, 736 int on_off) 737 { 738 /* Assert reset */ 739 if (on_off) { 740 if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB)) 741 USB_CTRL_UNSET_FAMILY(params, USB_PM, XHC_SOFT_RESETB); 742 else 743 USB_CTRL_UNSET_FAMILY(params, 744 USB30_CTL1, XHC_SOFT_RESETB); 745 } else { /* De-assert reset */ 746 if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB)) 747 USB_CTRL_SET_FAMILY(params, USB_PM, XHC_SOFT_RESETB); 748 else 749 USB_CTRL_SET_FAMILY(params, USB30_CTL1, 750 XHC_SOFT_RESETB); 751 } 752 } 753 754 /* 755 * Return the best map table family. The order is: 756 * - exact match of chip and major rev 757 * - exact match of chip and closest older major rev 758 * - default chip/rev. 759 * NOTE: The minor rev is always ignored. 760 */ 761 static enum brcm_family_type get_family_type( 762 struct brcm_usb_init_params *params) 763 { 764 int last_type = -1; 765 u32 last_family = 0; 766 u32 family_no_major; 767 unsigned int x; 768 u32 family; 769 770 family = params->family_id & 0xfffffff0; 771 family_no_major = params->family_id & 0xffffff00; 772 for (x = 0; id_to_type_table[x].id; x++) { 773 if (family == id_to_type_table[x].id) 774 return id_to_type_table[x].type; 775 if (family_no_major == (id_to_type_table[x].id & 0xffffff00)) 776 if (family > id_to_type_table[x].id && 777 last_family < id_to_type_table[x].id) { 778 last_family = id_to_type_table[x].id; 779 last_type = id_to_type_table[x].type; 780 } 781 } 782 783 /* If no match, return the default family */ 784 if (last_type == -1) 785 return id_to_type_table[x].type; 786 return last_type; 787 } 788 789 static void usb_init_ipp(struct brcm_usb_init_params *params) 790 { 791 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 792 u32 reg; 793 u32 orig_reg; 794 795 /* Starting with the 7445d0, there are no longer separate 3.0 796 * versions of IOC and IPP. 797 */ 798 if (USB_CTRL_MASK_FAMILY(params, USB30_CTL1, USB3_IOC)) { 799 if (params->ioc) 800 USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IOC); 801 if (params->ipp == 1) 802 USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP); 803 } 804 805 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); 806 orig_reg = reg; 807 if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL)) 808 /* Never use the strap, it's going away. */ 809 reg &= ~(USB_CTRL_MASK_FAMILY(params, 810 SETUP, 811 STRAP_CC_DRD_MODE_ENABLE_SEL)); 812 if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL)) 813 /* override ipp strap pin (if it exits) */ 814 if (params->ipp != 2) 815 reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP, 816 STRAP_IPP_SEL)); 817 818 /* Override the default OC and PP polarity */ 819 reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC)); 820 if (params->ioc) 821 reg |= USB_CTRL_MASK(SETUP, IOC); 822 if (params->ipp == 1) 823 reg |= USB_CTRL_MASK(SETUP, IPP); 824 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); 825 826 /* 827 * If we're changing IPP, make sure power is off long enough 828 * to turn off any connected devices. 829 */ 830 if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP)) 831 msleep(50); 832 } 833 834 static void usb_wake_enable(struct brcm_usb_init_params *params, 835 bool enable) 836 { 837 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 838 839 if (enable) 840 USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN); 841 else 842 USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN); 843 } 844 845 static void usb_init_common(struct brcm_usb_init_params *params) 846 { 847 u32 reg; 848 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 849 850 /* Clear any pending wake conditions */ 851 usb_wake_enable(params, false); 852 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS)); 853 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS)); 854 855 /* Take USB out of power down */ 856 if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) { 857 USB_CTRL_UNSET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); 858 /* 1 millisecond - for USB clocks to settle down */ 859 usleep_range(1000, 2000); 860 } 861 862 if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) { 863 USB_CTRL_UNSET_FAMILY(params, USB_PM, USB_PWRDN); 864 /* 1 millisecond - for USB clocks to settle down */ 865 usleep_range(1000, 2000); 866 } 867 868 if (params->selected_family != BRCM_FAMILY_74371A0 && 869 (BRCM_ID(params->family_id) != 0x7364)) 870 /* 871 * HW7439-637: 7439a0 and its derivatives do not have large 872 * enough descriptor storage for this. 873 */ 874 USB_CTRL_SET_FAMILY(params, SETUP, SS_EHCI64BIT_EN); 875 876 /* Block auto PLL suspend by USB2 PHY (Sasi) */ 877 USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN); 878 879 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); 880 if (params->selected_family == BRCM_FAMILY_7364A0) 881 /* Suppress overcurrent indication from USB30 ports for A0 */ 882 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE); 883 884 brcmusb_usb_phy_ldo_fix(ctrl); 885 brcmusb_usb2_eye_fix(ctrl); 886 887 /* 888 * Make sure the second and third memory controller 889 * interfaces are enabled if they exist. 890 */ 891 if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN)) 892 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN); 893 if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN)) 894 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN); 895 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); 896 897 brcmusb_memc_fix(params); 898 899 /* Workaround for false positive OC for 7439b2 in DRD/Device mode */ 900 if ((params->family_id == 0x74390012) && 901 (params->supported_port_modes != USB_CTLR_MODE_HOST)) { 902 USB_CTRL_SET(ctrl, SETUP, OC_DISABLE_PORT1); 903 USB_CTRL_SET_FAMILY(params, SETUP, OC3_DISABLE_PORT1); 904 } 905 906 if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { 907 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 908 reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, 909 PORT_MODE); 910 reg |= params->port_mode; 911 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 912 } 913 if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) { 914 switch (params->supported_port_modes) { 915 case USB_CTLR_MODE_HOST: 916 USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); 917 break; 918 default: 919 USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); 920 USB_CTRL_SET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); 921 break; 922 } 923 } 924 if (USB_CTRL_MASK_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE)) { 925 if (params->supported_port_modes == USB_CTLR_MODE_TYPEC_PD) 926 USB_CTRL_SET_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE); 927 else 928 USB_CTRL_UNSET_FAMILY(params, SETUP, 929 CC_DRD_MODE_ENABLE); 930 } 931 } 932 933 static void usb_init_eohci(struct brcm_usb_init_params *params) 934 { 935 u32 reg; 936 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 937 938 if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB)) 939 USB_CTRL_SET_FAMILY(params, USB_PM, USB20_HC_RESETB); 940 941 if (params->selected_family == BRCM_FAMILY_7366C0) 942 /* 943 * Don't enable this so the memory controller doesn't read 944 * into memory holes. NOTE: This bit is low true on 7366C0. 945 */ 946 USB_CTRL_SET(ctrl, EBRIDGE, ESTOP_SCB_REQ); 947 948 /* Setup the endian bits */ 949 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); 950 reg &= ~USB_CTRL_SETUP_ENDIAN_BITS; 951 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN); 952 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); 953 954 if (params->selected_family == BRCM_FAMILY_7271A0) 955 /* Enable LS keep alive fix for certain keyboards */ 956 USB_CTRL_SET(ctrl, OBRIDGE, LS_KEEP_ALIVE); 957 958 if (params->family_id == 0x72550000) { 959 /* 960 * Make the burst size 512 bytes to fix a hardware bug 961 * on the 7255a0. See HW7255-24. 962 */ 963 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, EBRIDGE)); 964 reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE); 965 reg |= 0x800; 966 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE)); 967 } 968 } 969 970 static void usb_init_xhci(struct brcm_usb_init_params *params) 971 { 972 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 973 974 USB_CTRL_UNSET(ctrl, USB30_PCTL, PHY3_IDDQ_OVERRIDE); 975 /* 1 millisecond - for USB clocks to settle down */ 976 usleep_range(1000, 2000); 977 978 if (BRCM_ID(params->family_id) == 0x7366) { 979 /* 980 * The PHY3_SOFT_RESETB bits default to the wrong state. 981 */ 982 USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB); 983 USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB_P1); 984 } 985 986 /* 987 * Kick start USB3 PHY 988 * Make sure it's low to insure a rising edge. 989 */ 990 USB_CTRL_UNSET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START); 991 USB_CTRL_SET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START); 992 993 brcmusb_usb3_phy_workarounds(params); 994 brcmusb_xhci_soft_reset(params, 0); 995 brcmusb_usb3_otp_fix(params); 996 } 997 998 static void usb_uninit_common(struct brcm_usb_init_params *params) 999 { 1000 if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) 1001 USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN); 1002 1003 if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) 1004 USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); 1005 if (params->wake_enabled) 1006 usb_wake_enable(params, true); 1007 } 1008 1009 static void usb_uninit_eohci(struct brcm_usb_init_params *params) 1010 { 1011 } 1012 1013 static void usb_uninit_xhci(struct brcm_usb_init_params *params) 1014 { 1015 brcmusb_xhci_soft_reset(params, 1); 1016 USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_PCTL, 1017 PHY3_IDDQ_OVERRIDE); 1018 } 1019 1020 static int usb_get_dual_select(struct brcm_usb_init_params *params) 1021 { 1022 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 1023 u32 reg = 0; 1024 1025 pr_debug("%s\n", __func__); 1026 if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { 1027 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 1028 reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, 1029 PORT_MODE); 1030 } 1031 return reg; 1032 } 1033 1034 static void usb_set_dual_select(struct brcm_usb_init_params *params) 1035 { 1036 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 1037 u32 reg; 1038 1039 pr_debug("%s\n", __func__); 1040 1041 if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { 1042 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 1043 reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, 1044 PORT_MODE); 1045 reg |= params->port_mode; 1046 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 1047 } 1048 } 1049 1050 static const struct brcm_usb_init_ops bcm7445_ops = { 1051 .init_ipp = usb_init_ipp, 1052 .init_common = usb_init_common, 1053 .init_eohci = usb_init_eohci, 1054 .init_xhci = usb_init_xhci, 1055 .uninit_common = usb_uninit_common, 1056 .uninit_eohci = usb_uninit_eohci, 1057 .uninit_xhci = usb_uninit_xhci, 1058 .get_dual_select = usb_get_dual_select, 1059 .set_dual_select = usb_set_dual_select, 1060 }; 1061 1062 void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params) 1063 { 1064 int fam; 1065 1066 fam = BRCM_FAMILY_4908; 1067 params->selected_family = fam; 1068 params->usb_reg_bits_map = 1069 &usb_reg_bits_map_table[fam][0]; 1070 params->family_name = family_names[fam]; 1071 params->ops = &bcm7445_ops; 1072 } 1073 1074 void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params) 1075 { 1076 int fam; 1077 1078 pr_debug("%s\n", __func__); 1079 1080 fam = get_family_type(params); 1081 params->selected_family = fam; 1082 params->usb_reg_bits_map = 1083 &usb_reg_bits_map_table[fam][0]; 1084 params->family_name = family_names[fam]; 1085 params->ops = &bcm7445_ops; 1086 } 1087