1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * phy-brcm-usb-init.c - Broadcom USB Phy chip specific init functions 4 * 5 * Copyright (C) 2014-2017 Broadcom 6 */ 7 8 /* 9 * This module contains USB PHY initialization for power up and S3 resume 10 */ 11 12 #include <linux/delay.h> 13 #include <linux/io.h> 14 15 #include <linux/soc/brcmstb/brcmstb.h> 16 #include "phy-brcm-usb-init.h" 17 18 #define PHY_PORTS 2 19 #define PHY_PORT_SELECT_0 0 20 #define PHY_PORT_SELECT_1 0x1000 21 22 /* Register definitions for the USB CTRL block */ 23 #define USB_CTRL_SETUP 0x00 24 #define USB_CTRL_SETUP_BABO_MASK BIT(0) 25 #define USB_CTRL_SETUP_FNHW_MASK BIT(1) 26 #define USB_CTRL_SETUP_FNBO_MASK BIT(2) 27 #define USB_CTRL_SETUP_WABO_MASK BIT(3) 28 #define USB_CTRL_SETUP_IOC_MASK BIT(4) 29 #define USB_CTRL_SETUP_IPP_MASK BIT(5) 30 #define USB_CTRL_SETUP_SCB_CLIENT_SWAP_MASK BIT(13) /* option */ 31 #define USB_CTRL_SETUP_SCB1_EN_MASK BIT(14) /* option */ 32 #define USB_CTRL_SETUP_SCB2_EN_MASK BIT(15) /* option */ 33 #define USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK BIT(17) /* option */ 34 #define USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK BIT(16) /* option */ 35 #define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK BIT(25) /* option */ 36 #define USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK BIT(26) /* option */ 37 #define USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK BIT(27) /* opt */ 38 #define USB_CTRL_SETUP_OC3_DISABLE_MASK GENMASK(31, 30) /* option */ 39 #define USB_CTRL_PLL_CTL 0x04 40 #define USB_CTRL_PLL_CTL_PLL_SUSPEND_EN_MASK BIT(27) 41 #define USB_CTRL_PLL_CTL_PLL_RESETB_MASK BIT(30) 42 #define USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK BIT(31) /* option */ 43 #define USB_CTRL_EBRIDGE 0x0c 44 #define USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK GENMASK(11, 7) /* option */ 45 #define USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK BIT(17) /* option */ 46 #define USB_CTRL_OBRIDGE 0x10 47 #define USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK BIT(27) 48 #define USB_CTRL_MDIO 0x14 49 #define USB_CTRL_MDIO2 0x18 50 #define USB_CTRL_UTMI_CTL_1 0x2c 51 #define USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_MASK BIT(11) 52 #define USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_P1_MASK BIT(27) 53 #define USB_CTRL_USB_PM 0x34 54 #define USB_CTRL_USB_PM_RMTWKUP_EN_MASK BIT(0) 55 #define USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK GENMASK(21, 20) /* option */ 56 #define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK BIT(22) /* option */ 57 #define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK BIT(23) /* option */ 58 #define USB_CTRL_USB_PM_USB20_HC_RESETB_MASK GENMASK(29, 28) /* option */ 59 #define USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK BIT(30) /* option */ 60 #define USB_CTRL_USB_PM_SOFT_RESET_MASK BIT(30) /* option */ 61 #define USB_CTRL_USB_PM_USB_PWRDN_MASK BIT(31) /* option */ 62 #define USB_CTRL_USB_PM_STATUS 0x38 63 #define USB_CTRL_USB30_CTL1 0x60 64 #define USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK BIT(4) 65 #define USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK BIT(16) 66 #define USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK BIT(17) /* option */ 67 #define USB_CTRL_USB30_CTL1_USB3_IOC_MASK BIT(28) /* option */ 68 #define USB_CTRL_USB30_CTL1_USB3_IPP_MASK BIT(29) /* option */ 69 #define USB_CTRL_USB30_PCTL 0x70 70 #define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_MASK BIT(1) 71 #define USB_CTRL_USB30_PCTL_PHY3_IDDQ_OVERRIDE_MASK BIT(15) 72 #define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_P1_MASK BIT(17) 73 #define USB_CTRL_USB_DEVICE_CTL1 0x90 74 #define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK GENMASK(1, 0) /* option */ 75 76 /* Register definitions for the XHCI EC block */ 77 #define USB_XHCI_EC_IRAADR 0x658 78 #define USB_XHCI_EC_IRADAT 0x65c 79 80 enum brcm_family_type { 81 BRCM_FAMILY_3390A0, 82 BRCM_FAMILY_4908, 83 BRCM_FAMILY_7250B0, 84 BRCM_FAMILY_7271A0, 85 BRCM_FAMILY_7364A0, 86 BRCM_FAMILY_7366C0, 87 BRCM_FAMILY_74371A0, 88 BRCM_FAMILY_7439B0, 89 BRCM_FAMILY_7445D0, 90 BRCM_FAMILY_7260A0, 91 BRCM_FAMILY_7278A0, 92 BRCM_FAMILY_COUNT, 93 }; 94 95 #define USB_BRCM_FAMILY(chip) \ 96 [BRCM_FAMILY_##chip] = __stringify(chip) 97 98 static const char *family_names[BRCM_FAMILY_COUNT] = { 99 USB_BRCM_FAMILY(3390A0), 100 USB_BRCM_FAMILY(4908), 101 USB_BRCM_FAMILY(7250B0), 102 USB_BRCM_FAMILY(7271A0), 103 USB_BRCM_FAMILY(7364A0), 104 USB_BRCM_FAMILY(7366C0), 105 USB_BRCM_FAMILY(74371A0), 106 USB_BRCM_FAMILY(7439B0), 107 USB_BRCM_FAMILY(7445D0), 108 USB_BRCM_FAMILY(7260A0), 109 USB_BRCM_FAMILY(7278A0), 110 }; 111 112 enum { 113 USB_CTRL_SETUP_SCB1_EN_SELECTOR, 114 USB_CTRL_SETUP_SCB2_EN_SELECTOR, 115 USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR, 116 USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR, 117 USB_CTRL_SETUP_OC3_DISABLE_SELECTOR, 118 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR, 119 USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR, 120 USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR, 121 USB_CTRL_USB_PM_USB_PWRDN_SELECTOR, 122 USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_SELECTOR, 123 USB_CTRL_USB30_CTL1_USB3_IOC_SELECTOR, 124 USB_CTRL_USB30_CTL1_USB3_IPP_SELECTOR, 125 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_SELECTOR, 126 USB_CTRL_USB_PM_SOFT_RESET_SELECTOR, 127 USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_SELECTOR, 128 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_SELECTOR, 129 USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR, 130 USB_CTRL_SETUP_ENDIAN_SELECTOR, 131 USB_CTRL_SELECTOR_COUNT, 132 }; 133 134 #define USB_CTRL_MASK_FAMILY(params, reg, field) \ 135 (params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR]) 136 137 #define USB_CTRL_SET_FAMILY(params, reg, field) \ 138 usb_ctrl_set_family(params, USB_CTRL_##reg, \ 139 USB_CTRL_##reg##_##field##_SELECTOR) 140 #define USB_CTRL_UNSET_FAMILY(params, reg, field) \ 141 usb_ctrl_unset_family(params, USB_CTRL_##reg, \ 142 USB_CTRL_##reg##_##field##_SELECTOR) 143 144 #define MDIO_USB2 0 145 #define MDIO_USB3 BIT(31) 146 147 #define USB_CTRL_SETUP_ENDIAN_BITS ( \ 148 USB_CTRL_MASK(SETUP, BABO) | \ 149 USB_CTRL_MASK(SETUP, FNHW) | \ 150 USB_CTRL_MASK(SETUP, FNBO) | \ 151 USB_CTRL_MASK(SETUP, WABO)) 152 153 #ifdef __LITTLE_ENDIAN 154 #define ENDIAN_SETTINGS ( \ 155 USB_CTRL_MASK(SETUP, BABO) | \ 156 USB_CTRL_MASK(SETUP, FNHW)) 157 #else 158 #define ENDIAN_SETTINGS ( \ 159 USB_CTRL_MASK(SETUP, FNHW) | \ 160 USB_CTRL_MASK(SETUP, FNBO) | \ 161 USB_CTRL_MASK(SETUP, WABO)) 162 #endif 163 164 struct id_to_type { 165 u32 id; 166 int type; 167 }; 168 169 static const struct id_to_type id_to_type_table[] = { 170 { 0x33900000, BRCM_FAMILY_3390A0 }, 171 { 0x72500010, BRCM_FAMILY_7250B0 }, 172 { 0x72600000, BRCM_FAMILY_7260A0 }, 173 { 0x72550000, BRCM_FAMILY_7260A0 }, 174 { 0x72680000, BRCM_FAMILY_7271A0 }, 175 { 0x72710000, BRCM_FAMILY_7271A0 }, 176 { 0x73640000, BRCM_FAMILY_7364A0 }, 177 { 0x73660020, BRCM_FAMILY_7366C0 }, 178 { 0x07437100, BRCM_FAMILY_74371A0 }, 179 { 0x74390010, BRCM_FAMILY_7439B0 }, 180 { 0x74450030, BRCM_FAMILY_7445D0 }, 181 { 0x72780000, BRCM_FAMILY_7278A0 }, 182 { 0, BRCM_FAMILY_7271A0 }, /* default */ 183 }; 184 185 static const u32 186 usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = { 187 /* 3390B0 */ 188 [BRCM_FAMILY_3390A0] = { 189 USB_CTRL_SETUP_SCB1_EN_MASK, 190 USB_CTRL_SETUP_SCB2_EN_MASK, 191 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 192 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 193 USB_CTRL_SETUP_OC3_DISABLE_MASK, 194 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 195 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 196 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 197 USB_CTRL_USB_PM_USB_PWRDN_MASK, 198 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 199 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 200 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 201 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 202 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 203 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 204 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 205 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 206 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 207 }, 208 /* 4908 */ 209 [BRCM_FAMILY_4908] = { 210 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */ 211 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */ 212 0, /* USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */ 213 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ 214 0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */ 215 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 216 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 217 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 218 USB_CTRL_USB_PM_USB_PWRDN_MASK, 219 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 220 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 221 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 222 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ 223 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 224 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 225 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 226 0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK */ 227 0, /* USB_CTRL_SETUP ENDIAN bits */ 228 }, 229 /* 7250b0 */ 230 [BRCM_FAMILY_7250B0] = { 231 USB_CTRL_SETUP_SCB1_EN_MASK, 232 USB_CTRL_SETUP_SCB2_EN_MASK, 233 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 234 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ 235 USB_CTRL_SETUP_OC3_DISABLE_MASK, 236 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, 237 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 238 USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, 239 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ 240 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 241 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 242 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 243 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ 244 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 245 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 246 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 247 USB_CTRL_USB_PM_USB20_HC_RESETB_MASK, 248 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 249 }, 250 /* 7271a0 */ 251 [BRCM_FAMILY_7271A0] = { 252 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */ 253 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */ 254 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 255 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 256 USB_CTRL_SETUP_OC3_DISABLE_MASK, 257 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 258 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, 259 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 260 USB_CTRL_USB_PM_USB_PWRDN_MASK, 261 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 262 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 263 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 264 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 265 USB_CTRL_USB_PM_SOFT_RESET_MASK, 266 USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK, 267 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK, 268 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 269 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 270 }, 271 /* 7364a0 */ 272 [BRCM_FAMILY_7364A0] = { 273 USB_CTRL_SETUP_SCB1_EN_MASK, 274 USB_CTRL_SETUP_SCB2_EN_MASK, 275 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 276 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ 277 USB_CTRL_SETUP_OC3_DISABLE_MASK, 278 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, 279 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 280 USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, 281 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ 282 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 283 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 284 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 285 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ 286 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 287 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 288 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 289 USB_CTRL_USB_PM_USB20_HC_RESETB_MASK, 290 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 291 }, 292 /* 7366c0 */ 293 [BRCM_FAMILY_7366C0] = { 294 USB_CTRL_SETUP_SCB1_EN_MASK, 295 USB_CTRL_SETUP_SCB2_EN_MASK, 296 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 297 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ 298 USB_CTRL_SETUP_OC3_DISABLE_MASK, 299 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 300 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 301 USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, 302 USB_CTRL_USB_PM_USB_PWRDN_MASK, 303 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 304 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 305 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 306 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ 307 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 308 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 309 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 310 USB_CTRL_USB_PM_USB20_HC_RESETB_MASK, 311 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 312 }, 313 /* 74371A0 */ 314 [BRCM_FAMILY_74371A0] = { 315 USB_CTRL_SETUP_SCB1_EN_MASK, 316 USB_CTRL_SETUP_SCB2_EN_MASK, 317 USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK, 318 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ 319 0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */ 320 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, 321 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 322 0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */ 323 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ 324 USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK, 325 USB_CTRL_USB30_CTL1_USB3_IOC_MASK, 326 USB_CTRL_USB30_CTL1_USB3_IPP_MASK, 327 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ 328 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 329 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 330 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 331 0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_MASK */ 332 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 333 }, 334 /* 7439B0 */ 335 [BRCM_FAMILY_7439B0] = { 336 USB_CTRL_SETUP_SCB1_EN_MASK, 337 USB_CTRL_SETUP_SCB2_EN_MASK, 338 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 339 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 340 USB_CTRL_SETUP_OC3_DISABLE_MASK, 341 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 342 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, 343 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 344 USB_CTRL_USB_PM_USB_PWRDN_MASK, 345 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 346 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 347 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 348 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 349 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 350 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 351 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 352 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 353 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 354 }, 355 /* 7445d0 */ 356 [BRCM_FAMILY_7445D0] = { 357 USB_CTRL_SETUP_SCB1_EN_MASK, 358 USB_CTRL_SETUP_SCB2_EN_MASK, 359 USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK, 360 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ 361 USB_CTRL_SETUP_OC3_DISABLE_MASK, 362 USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, 363 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 364 0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */ 365 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ 366 USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK, 367 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 368 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 369 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */ 370 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */ 371 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 372 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 373 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 374 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 375 }, 376 /* 7260a0 */ 377 [BRCM_FAMILY_7260A0] = { 378 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */ 379 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */ 380 USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK, 381 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 382 USB_CTRL_SETUP_OC3_DISABLE_MASK, 383 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 384 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, 385 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 386 USB_CTRL_USB_PM_USB_PWRDN_MASK, 387 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 388 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 389 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 390 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 391 USB_CTRL_USB_PM_SOFT_RESET_MASK, 392 USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK, 393 USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK, 394 USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK, 395 ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */ 396 }, 397 /* 7278a0 */ 398 [BRCM_FAMILY_7278A0] = { 399 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */ 400 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */ 401 0, /*USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */ 402 USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, 403 USB_CTRL_SETUP_OC3_DISABLE_MASK, 404 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ 405 USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, 406 USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, 407 USB_CTRL_USB_PM_USB_PWRDN_MASK, 408 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */ 409 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */ 410 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */ 411 USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK, 412 USB_CTRL_USB_PM_SOFT_RESET_MASK, 413 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */ 414 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */ 415 0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_MASK */ 416 0, /* USB_CTRL_SETUP ENDIAN bits */ 417 }, 418 }; 419 420 static inline 421 void usb_ctrl_unset_family(struct brcm_usb_init_params *params, 422 u32 reg_offset, u32 field) 423 { 424 u32 mask; 425 426 mask = params->usb_reg_bits_map[field]; 427 brcm_usb_ctrl_unset(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); 428 }; 429 430 static inline 431 void usb_ctrl_set_family(struct brcm_usb_init_params *params, 432 u32 reg_offset, u32 field) 433 { 434 u32 mask; 435 436 mask = params->usb_reg_bits_map[field]; 437 brcm_usb_ctrl_set(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); 438 }; 439 440 static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode) 441 { 442 u32 data; 443 444 data = (reg << 16) | mode; 445 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 446 data |= (1 << 24); 447 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 448 data &= ~(1 << 24); 449 /* wait for the 60MHz parallel to serial shifter */ 450 usleep_range(10, 20); 451 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 452 /* wait for the 60MHz parallel to serial shifter */ 453 usleep_range(10, 20); 454 455 return brcm_usb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; 456 } 457 458 static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg, 459 u32 val, int mode) 460 { 461 u32 data; 462 463 data = (reg << 16) | val | mode; 464 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 465 data |= (1 << 25); 466 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 467 data &= ~(1 << 25); 468 469 /* wait for the 60MHz parallel to serial shifter */ 470 usleep_range(10, 20); 471 brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); 472 /* wait for the 60MHz parallel to serial shifter */ 473 usleep_range(10, 20); 474 } 475 476 static void brcmusb_usb_phy_ldo_fix(void __iomem *ctrl_base) 477 { 478 /* first disable FSM but also leave it that way */ 479 /* to allow normal suspend/resume */ 480 USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN); 481 USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN_P1); 482 483 /* reset USB 2.0 PLL */ 484 USB_CTRL_UNSET(ctrl_base, PLL_CTL, PLL_RESETB); 485 /* PLL reset period */ 486 udelay(1); 487 USB_CTRL_SET(ctrl_base, PLL_CTL, PLL_RESETB); 488 /* Give PLL enough time to lock */ 489 usleep_range(1000, 2000); 490 } 491 492 static void brcmusb_usb2_eye_fix(void __iomem *ctrl_base) 493 { 494 /* Increase USB 2.0 TX level to meet spec requirement */ 495 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x80a0, MDIO_USB2); 496 brcmusb_usb_mdio_write(ctrl_base, 0x0a, 0xc6a0, MDIO_USB2); 497 } 498 499 static void brcmusb_usb3_pll_fix(void __iomem *ctrl_base) 500 { 501 /* Set correct window for PLL lock detect */ 502 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3); 503 brcmusb_usb_mdio_write(ctrl_base, 0x07, 0x1503, MDIO_USB3); 504 } 505 506 static void brcmusb_usb3_enable_pipe_reset(void __iomem *ctrl_base) 507 { 508 u32 val; 509 510 /* Re-enable USB 3.0 pipe reset */ 511 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3); 512 val = brcmusb_usb_mdio_read(ctrl_base, 0x0f, MDIO_USB3) | 0x200; 513 brcmusb_usb_mdio_write(ctrl_base, 0x0f, val, MDIO_USB3); 514 } 515 516 static void brcmusb_usb3_enable_sigdet(void __iomem *ctrl_base) 517 { 518 u32 val, ofs; 519 int ii; 520 521 ofs = 0; 522 for (ii = 0; ii < PHY_PORTS; ++ii) { 523 /* Set correct default for sigdet */ 524 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8080 + ofs), 525 MDIO_USB3); 526 val = brcmusb_usb_mdio_read(ctrl_base, 0x05, MDIO_USB3); 527 val = (val & ~0x800f) | 0x800d; 528 brcmusb_usb_mdio_write(ctrl_base, 0x05, val, MDIO_USB3); 529 ofs = PHY_PORT_SELECT_1; 530 } 531 } 532 533 static void brcmusb_usb3_enable_skip_align(void __iomem *ctrl_base) 534 { 535 u32 val, ofs; 536 int ii; 537 538 ofs = 0; 539 for (ii = 0; ii < PHY_PORTS; ++ii) { 540 /* Set correct default for SKIP align */ 541 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8060 + ofs), 542 MDIO_USB3); 543 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0x200; 544 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); 545 ofs = PHY_PORT_SELECT_1; 546 } 547 } 548 549 static void brcmusb_usb3_unfreeze_aeq(void __iomem *ctrl_base) 550 { 551 u32 val, ofs; 552 int ii; 553 554 ofs = 0; 555 for (ii = 0; ii < PHY_PORTS; ++ii) { 556 /* Let EQ freeze after TSEQ */ 557 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x80e0 + ofs), 558 MDIO_USB3); 559 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3); 560 val &= ~0x0008; 561 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); 562 ofs = PHY_PORT_SELECT_1; 563 } 564 } 565 566 static void brcmusb_usb3_pll_54mhz(struct brcm_usb_init_params *params) 567 { 568 u32 ofs; 569 int ii; 570 void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; 571 572 /* 573 * On newer B53 based SoC's, the reference clock for the 574 * 3.0 PLL has been changed from 50MHz to 54MHz so the 575 * PLL needs to be reprogrammed. 576 * See SWLINUX-4006. 577 * 578 * On the 7364C0, the reference clock for the 579 * 3.0 PLL has been changed from 50MHz to 54MHz to 580 * work around a MOCA issue. 581 * See SWLINUX-4169. 582 */ 583 switch (params->selected_family) { 584 case BRCM_FAMILY_3390A0: 585 case BRCM_FAMILY_4908: 586 case BRCM_FAMILY_7250B0: 587 case BRCM_FAMILY_7366C0: 588 case BRCM_FAMILY_74371A0: 589 case BRCM_FAMILY_7439B0: 590 case BRCM_FAMILY_7445D0: 591 case BRCM_FAMILY_7260A0: 592 return; 593 case BRCM_FAMILY_7364A0: 594 if (BRCM_REV(params->family_id) < 0x20) 595 return; 596 break; 597 } 598 599 /* set USB 3.0 PLL to accept 54Mhz reference clock */ 600 USB_CTRL_UNSET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START); 601 602 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3); 603 brcmusb_usb_mdio_write(ctrl_base, 0x10, 0x5784, MDIO_USB3); 604 brcmusb_usb_mdio_write(ctrl_base, 0x11, 0x01d0, MDIO_USB3); 605 brcmusb_usb_mdio_write(ctrl_base, 0x12, 0x1DE8, MDIO_USB3); 606 brcmusb_usb_mdio_write(ctrl_base, 0x13, 0xAA80, MDIO_USB3); 607 brcmusb_usb_mdio_write(ctrl_base, 0x14, 0x8826, MDIO_USB3); 608 brcmusb_usb_mdio_write(ctrl_base, 0x15, 0x0044, MDIO_USB3); 609 brcmusb_usb_mdio_write(ctrl_base, 0x16, 0x8000, MDIO_USB3); 610 brcmusb_usb_mdio_write(ctrl_base, 0x17, 0x0851, MDIO_USB3); 611 brcmusb_usb_mdio_write(ctrl_base, 0x18, 0x0000, MDIO_USB3); 612 613 /* both ports */ 614 ofs = 0; 615 for (ii = 0; ii < PHY_PORTS; ++ii) { 616 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8040 + ofs), 617 MDIO_USB3); 618 brcmusb_usb_mdio_write(ctrl_base, 0x03, 0x0090, MDIO_USB3); 619 brcmusb_usb_mdio_write(ctrl_base, 0x04, 0x0134, MDIO_USB3); 620 brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8020 + ofs), 621 MDIO_USB3); 622 brcmusb_usb_mdio_write(ctrl_base, 0x01, 0x00e2, MDIO_USB3); 623 ofs = PHY_PORT_SELECT_1; 624 } 625 626 /* restart PLL sequence */ 627 USB_CTRL_SET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START); 628 /* Give PLL enough time to lock */ 629 usleep_range(1000, 2000); 630 } 631 632 static void brcmusb_usb3_ssc_enable(void __iomem *ctrl_base) 633 { 634 u32 val; 635 636 /* Enable USB 3.0 TX spread spectrum */ 637 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8040, MDIO_USB3); 638 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf; 639 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); 640 641 /* Currently, USB 3.0 SSC is enabled via port 0 MDIO registers, 642 * which should have been adequate. However, due to a bug in the 643 * USB 3.0 PHY, it must be enabled via both ports (HWUSB3DVT-26). 644 */ 645 brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x9040, MDIO_USB3); 646 val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf; 647 brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3); 648 } 649 650 static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params) 651 { 652 void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; 653 654 brcmusb_usb3_pll_fix(ctrl_base); 655 brcmusb_usb3_pll_54mhz(params); 656 brcmusb_usb3_ssc_enable(ctrl_base); 657 brcmusb_usb3_enable_pipe_reset(ctrl_base); 658 brcmusb_usb3_enable_sigdet(ctrl_base); 659 brcmusb_usb3_enable_skip_align(ctrl_base); 660 brcmusb_usb3_unfreeze_aeq(ctrl_base); 661 } 662 663 static void brcmusb_memc_fix(struct brcm_usb_init_params *params) 664 { 665 u32 prid; 666 667 if (params->selected_family != BRCM_FAMILY_7445D0) 668 return; 669 /* 670 * This is a workaround for HW7445-1869 where a DMA write ends up 671 * doing a read pre-fetch after the end of the DMA buffer. This 672 * causes a problem when the DMA buffer is at the end of physical 673 * memory, causing the pre-fetch read to access non-existent memory, 674 * and the chip bondout has MEMC2 disabled. When the pre-fetch read 675 * tries to use the disabled MEMC2, it hangs the bus. The workaround 676 * is to disable MEMC2 access in the usb controller which avoids 677 * the hang. 678 */ 679 680 prid = params->product_id & 0xfffff000; 681 switch (prid) { 682 case 0x72520000: 683 case 0x74480000: 684 case 0x74490000: 685 case 0x07252000: 686 case 0x07448000: 687 case 0x07449000: 688 USB_CTRL_UNSET_FAMILY(params, SETUP, SCB2_EN); 689 } 690 } 691 692 static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params) 693 { 694 void __iomem *xhci_ec_base = params->regs[BRCM_REGS_XHCI_EC]; 695 u32 val; 696 697 if (params->family_id != 0x74371000 || !xhci_ec_base) 698 return; 699 brcm_usb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR)); 700 val = brcm_usb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); 701 702 /* set cfg_pick_ss_lock */ 703 val |= (1 << 27); 704 brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); 705 706 /* Reset USB 3.0 PHY for workaround to take effect */ 707 USB_CTRL_UNSET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); 708 USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); 709 } 710 711 static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params, 712 int on_off) 713 { 714 /* Assert reset */ 715 if (on_off) { 716 if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB)) 717 USB_CTRL_UNSET_FAMILY(params, USB_PM, XHC_SOFT_RESETB); 718 else 719 USB_CTRL_UNSET_FAMILY(params, 720 USB30_CTL1, XHC_SOFT_RESETB); 721 } else { /* De-assert reset */ 722 if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB)) 723 USB_CTRL_SET_FAMILY(params, USB_PM, XHC_SOFT_RESETB); 724 else 725 USB_CTRL_SET_FAMILY(params, USB30_CTL1, 726 XHC_SOFT_RESETB); 727 } 728 } 729 730 /* 731 * Return the best map table family. The order is: 732 * - exact match of chip and major rev 733 * - exact match of chip and closest older major rev 734 * - default chip/rev. 735 * NOTE: The minor rev is always ignored. 736 */ 737 static enum brcm_family_type get_family_type( 738 struct brcm_usb_init_params *params) 739 { 740 int last_type = -1; 741 u32 last_family = 0; 742 u32 family_no_major; 743 unsigned int x; 744 u32 family; 745 746 family = params->family_id & 0xfffffff0; 747 family_no_major = params->family_id & 0xffffff00; 748 for (x = 0; id_to_type_table[x].id; x++) { 749 if (family == id_to_type_table[x].id) 750 return id_to_type_table[x].type; 751 if (family_no_major == (id_to_type_table[x].id & 0xffffff00)) 752 if (family > id_to_type_table[x].id && 753 last_family < id_to_type_table[x].id) { 754 last_family = id_to_type_table[x].id; 755 last_type = id_to_type_table[x].type; 756 } 757 } 758 759 /* If no match, return the default family */ 760 if (last_type == -1) 761 return id_to_type_table[x].type; 762 return last_type; 763 } 764 765 static void usb_init_ipp(struct brcm_usb_init_params *params) 766 { 767 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 768 u32 reg; 769 u32 orig_reg; 770 771 /* Starting with the 7445d0, there are no longer separate 3.0 772 * versions of IOC and IPP. 773 */ 774 if (USB_CTRL_MASK_FAMILY(params, USB30_CTL1, USB3_IOC)) { 775 if (params->ioc) 776 USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IOC); 777 if (params->ipp == 1) 778 USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP); 779 } 780 781 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); 782 orig_reg = reg; 783 if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL)) 784 /* Never use the strap, it's going away. */ 785 reg &= ~(USB_CTRL_MASK_FAMILY(params, 786 SETUP, 787 STRAP_CC_DRD_MODE_ENABLE_SEL)); 788 if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL)) 789 /* override ipp strap pin (if it exits) */ 790 if (params->ipp != 2) 791 reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP, 792 STRAP_IPP_SEL)); 793 794 /* Override the default OC and PP polarity */ 795 reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC)); 796 if (params->ioc) 797 reg |= USB_CTRL_MASK(SETUP, IOC); 798 if (params->ipp == 1) 799 reg |= USB_CTRL_MASK(SETUP, IPP); 800 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); 801 802 /* 803 * If we're changing IPP, make sure power is off long enough 804 * to turn off any connected devices. 805 */ 806 if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP)) 807 msleep(50); 808 } 809 810 static void usb_wake_enable(struct brcm_usb_init_params *params, 811 bool enable) 812 { 813 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 814 815 if (enable) 816 USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN); 817 else 818 USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN); 819 } 820 821 static void usb_init_common(struct brcm_usb_init_params *params) 822 { 823 u32 reg; 824 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 825 826 /* Clear any pending wake conditions */ 827 usb_wake_enable(params, false); 828 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS)); 829 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS)); 830 831 /* Take USB out of power down */ 832 if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) { 833 USB_CTRL_UNSET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); 834 /* 1 millisecond - for USB clocks to settle down */ 835 usleep_range(1000, 2000); 836 } 837 838 if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) { 839 USB_CTRL_UNSET_FAMILY(params, USB_PM, USB_PWRDN); 840 /* 1 millisecond - for USB clocks to settle down */ 841 usleep_range(1000, 2000); 842 } 843 844 if (params->selected_family != BRCM_FAMILY_74371A0 && 845 (BRCM_ID(params->family_id) != 0x7364)) 846 /* 847 * HW7439-637: 7439a0 and its derivatives do not have large 848 * enough descriptor storage for this. 849 */ 850 USB_CTRL_SET_FAMILY(params, SETUP, SS_EHCI64BIT_EN); 851 852 /* Block auto PLL suspend by USB2 PHY (Sasi) */ 853 USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN); 854 855 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); 856 if (params->selected_family == BRCM_FAMILY_7364A0) 857 /* Suppress overcurrent indication from USB30 ports for A0 */ 858 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE); 859 860 brcmusb_usb_phy_ldo_fix(ctrl); 861 brcmusb_usb2_eye_fix(ctrl); 862 863 /* 864 * Make sure the second and third memory controller 865 * interfaces are enabled if they exist. 866 */ 867 if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN)) 868 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN); 869 if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN)) 870 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN); 871 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); 872 873 brcmusb_memc_fix(params); 874 875 if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { 876 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 877 reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, 878 PORT_MODE); 879 reg |= params->port_mode; 880 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 881 } 882 if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) { 883 switch (params->supported_port_modes) { 884 case USB_CTLR_MODE_HOST: 885 USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); 886 break; 887 default: 888 USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); 889 USB_CTRL_SET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); 890 break; 891 } 892 } 893 if (USB_CTRL_MASK_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE)) { 894 if (params->supported_port_modes == USB_CTLR_MODE_TYPEC_PD) 895 USB_CTRL_SET_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE); 896 else 897 USB_CTRL_UNSET_FAMILY(params, SETUP, 898 CC_DRD_MODE_ENABLE); 899 } 900 } 901 902 static void usb_init_eohci(struct brcm_usb_init_params *params) 903 { 904 u32 reg; 905 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 906 907 if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB)) 908 USB_CTRL_SET_FAMILY(params, USB_PM, USB20_HC_RESETB); 909 910 if (params->selected_family == BRCM_FAMILY_7366C0) 911 /* 912 * Don't enable this so the memory controller doesn't read 913 * into memory holes. NOTE: This bit is low true on 7366C0. 914 */ 915 USB_CTRL_SET(ctrl, EBRIDGE, ESTOP_SCB_REQ); 916 917 /* Setup the endian bits */ 918 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); 919 reg &= ~USB_CTRL_SETUP_ENDIAN_BITS; 920 reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN); 921 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); 922 923 if (params->selected_family == BRCM_FAMILY_7271A0) 924 /* Enable LS keep alive fix for certain keyboards */ 925 USB_CTRL_SET(ctrl, OBRIDGE, LS_KEEP_ALIVE); 926 927 if (params->family_id == 0x72550000) { 928 /* 929 * Make the burst size 512 bytes to fix a hardware bug 930 * on the 7255a0. See HW7255-24. 931 */ 932 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, EBRIDGE)); 933 reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE); 934 reg |= 0x800; 935 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE)); 936 } 937 } 938 939 static void usb_init_xhci(struct brcm_usb_init_params *params) 940 { 941 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 942 943 USB_CTRL_UNSET(ctrl, USB30_PCTL, PHY3_IDDQ_OVERRIDE); 944 /* 1 millisecond - for USB clocks to settle down */ 945 usleep_range(1000, 2000); 946 947 if (BRCM_ID(params->family_id) == 0x7366) { 948 /* 949 * The PHY3_SOFT_RESETB bits default to the wrong state. 950 */ 951 USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB); 952 USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB_P1); 953 } 954 955 /* 956 * Kick start USB3 PHY 957 * Make sure it's low to insure a rising edge. 958 */ 959 USB_CTRL_UNSET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START); 960 USB_CTRL_SET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START); 961 962 brcmusb_usb3_phy_workarounds(params); 963 brcmusb_xhci_soft_reset(params, 0); 964 brcmusb_usb3_otp_fix(params); 965 } 966 967 static void usb_uninit_common(struct brcm_usb_init_params *params) 968 { 969 if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) 970 USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN); 971 972 if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) 973 USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); 974 if (params->wake_enabled) 975 usb_wake_enable(params, true); 976 } 977 978 static void usb_uninit_eohci(struct brcm_usb_init_params *params) 979 { 980 } 981 982 static void usb_uninit_xhci(struct brcm_usb_init_params *params) 983 { 984 brcmusb_xhci_soft_reset(params, 1); 985 USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_PCTL, 986 PHY3_IDDQ_OVERRIDE); 987 } 988 989 static int usb_get_dual_select(struct brcm_usb_init_params *params) 990 { 991 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 992 u32 reg = 0; 993 994 pr_debug("%s\n", __func__); 995 if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { 996 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 997 reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, 998 PORT_MODE); 999 } 1000 return reg; 1001 } 1002 1003 static void usb_set_dual_select(struct brcm_usb_init_params *params) 1004 { 1005 void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; 1006 u32 reg; 1007 1008 pr_debug("%s\n", __func__); 1009 1010 if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { 1011 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 1012 reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, 1013 PORT_MODE); 1014 reg |= params->port_mode; 1015 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); 1016 } 1017 } 1018 1019 static const struct brcm_usb_init_ops bcm7445_ops = { 1020 .init_ipp = usb_init_ipp, 1021 .init_common = usb_init_common, 1022 .init_eohci = usb_init_eohci, 1023 .init_xhci = usb_init_xhci, 1024 .uninit_common = usb_uninit_common, 1025 .uninit_eohci = usb_uninit_eohci, 1026 .uninit_xhci = usb_uninit_xhci, 1027 .get_dual_select = usb_get_dual_select, 1028 .set_dual_select = usb_set_dual_select, 1029 }; 1030 1031 void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params) 1032 { 1033 int fam; 1034 1035 fam = BRCM_FAMILY_4908; 1036 params->selected_family = fam; 1037 params->usb_reg_bits_map = 1038 &usb_reg_bits_map_table[fam][0]; 1039 params->family_name = family_names[fam]; 1040 params->ops = &bcm7445_ops; 1041 } 1042 1043 void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params) 1044 { 1045 int fam; 1046 1047 pr_debug("%s\n", __func__); 1048 1049 fam = get_family_type(params); 1050 params->selected_family = fam; 1051 params->usb_reg_bits_map = 1052 &usb_reg_bits_map_table[fam][0]; 1053 params->family_name = family_names[fam]; 1054 params->ops = &bcm7445_ops; 1055 } 1056