1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Broadcom Northstar USB 3.0 PHY Driver 4 * 5 * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> 6 * Copyright (C) 2016 Broadcom 7 * 8 * All magic values used for initialization (and related comments) were obtained 9 * from Broadcom's SDK: 10 * Copyright (c) Broadcom Corp, 2012 11 */ 12 13 #include <linux/bcma/bcma.h> 14 #include <linux/delay.h> 15 #include <linux/err.h> 16 #include <linux/iopoll.h> 17 #include <linux/mdio.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/of_address.h> 21 #include <linux/platform_device.h> 22 #include <linux/phy/phy.h> 23 #include <linux/property.h> 24 #include <linux/slab.h> 25 26 #define BCM_NS_USB3_PHY_BASE_ADDR_REG 0x1f 27 #define BCM_NS_USB3_PHY_PLL30_BLOCK 0x8000 28 #define BCM_NS_USB3_PHY_TX_PMD_BLOCK 0x8040 29 #define BCM_NS_USB3_PHY_PIPE_BLOCK 0x8060 30 31 /* Registers of PLL30 block */ 32 #define BCM_NS_USB3_PLL_CONTROL 0x01 33 #define BCM_NS_USB3_PLLA_CONTROL0 0x0a 34 #define BCM_NS_USB3_PLLA_CONTROL1 0x0b 35 36 /* Registers of TX PMD block */ 37 #define BCM_NS_USB3_TX_PMD_CONTROL1 0x01 38 39 /* Registers of PIPE block */ 40 #define BCM_NS_USB3_LFPS_CMP 0x02 41 #define BCM_NS_USB3_LFPS_DEGLITCH 0x03 42 43 enum bcm_ns_family { 44 BCM_NS_UNKNOWN, 45 BCM_NS_AX, 46 BCM_NS_BX, 47 }; 48 49 struct bcm_ns_usb3 { 50 struct device *dev; 51 enum bcm_ns_family family; 52 void __iomem *dmp; 53 struct mdio_device *mdiodev; 54 struct phy *phy; 55 }; 56 57 static const struct of_device_id bcm_ns_usb3_id_table[] = { 58 { 59 .compatible = "brcm,ns-ax-usb3-phy", 60 .data = (int *)BCM_NS_AX, 61 }, 62 { 63 .compatible = "brcm,ns-bx-usb3-phy", 64 .data = (int *)BCM_NS_BX, 65 }, 66 {}, 67 }; 68 69 static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg, 70 u16 value); 71 72 static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3) 73 { 74 int err; 75 76 /* USB3 PLL Block */ 77 err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 78 BCM_NS_USB3_PHY_PLL30_BLOCK); 79 if (err < 0) 80 return err; 81 82 /* Assert Ana_Pllseq start */ 83 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x1000); 84 85 /* Assert CML Divider ratio to 26 */ 86 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400); 87 88 /* Asserting PLL Reset */ 89 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0xc000); 90 91 /* Deaaserting PLL Reset */ 92 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0x8000); 93 94 /* Deasserting USB3 system reset */ 95 writel(0, usb3->dmp + BCMA_RESET_CTL); 96 97 /* PLL frequency monitor enable */ 98 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x9000); 99 100 /* PIPE Block */ 101 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 102 BCM_NS_USB3_PHY_PIPE_BLOCK); 103 104 /* CMPMAX & CMPMINTH setting */ 105 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_CMP, 0xf30d); 106 107 /* DEGLITCH MIN & MAX setting */ 108 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_DEGLITCH, 0x6302); 109 110 /* TXPMD block */ 111 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 112 BCM_NS_USB3_PHY_TX_PMD_BLOCK); 113 114 /* Enabling SSC */ 115 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003); 116 117 return 0; 118 } 119 120 static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3) 121 { 122 int err; 123 124 /* PLL30 block */ 125 err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 126 BCM_NS_USB3_PHY_PLL30_BLOCK); 127 if (err < 0) 128 return err; 129 130 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400); 131 132 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 0x80e0); 133 134 bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x009c); 135 136 /* Enable SSC */ 137 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 138 BCM_NS_USB3_PHY_TX_PMD_BLOCK); 139 140 bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x21d3); 141 142 bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003); 143 144 /* Deasserting USB3 system reset */ 145 writel(0, usb3->dmp + BCMA_RESET_CTL); 146 147 return 0; 148 } 149 150 static int bcm_ns_usb3_phy_init(struct phy *phy) 151 { 152 struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy); 153 int err; 154 155 /* Perform USB3 system soft reset */ 156 writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL); 157 158 switch (usb3->family) { 159 case BCM_NS_AX: 160 err = bcm_ns_usb3_phy_init_ns_ax(usb3); 161 break; 162 case BCM_NS_BX: 163 err = bcm_ns_usb3_phy_init_ns_bx(usb3); 164 break; 165 default: 166 WARN_ON(1); 167 err = -ENOTSUPP; 168 } 169 170 return err; 171 } 172 173 static const struct phy_ops ops = { 174 .init = bcm_ns_usb3_phy_init, 175 .owner = THIS_MODULE, 176 }; 177 178 /************************************************** 179 * MDIO driver code 180 **************************************************/ 181 182 static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg, 183 u16 value) 184 { 185 struct mdio_device *mdiodev = usb3->mdiodev; 186 187 return mdiodev_write(mdiodev, reg, value); 188 } 189 190 static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev) 191 { 192 struct device *dev = &mdiodev->dev; 193 struct phy_provider *phy_provider; 194 struct device_node *syscon_np; 195 struct bcm_ns_usb3 *usb3; 196 struct resource res; 197 int err; 198 199 usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL); 200 if (!usb3) 201 return -ENOMEM; 202 203 usb3->dev = dev; 204 usb3->mdiodev = mdiodev; 205 206 usb3->family = (enum bcm_ns_family)device_get_match_data(dev); 207 208 syscon_np = of_parse_phandle(dev->of_node, "usb3-dmp-syscon", 0); 209 err = of_address_to_resource(syscon_np, 0, &res); 210 of_node_put(syscon_np); 211 if (err) 212 return err; 213 214 usb3->dmp = devm_ioremap_resource(dev, &res); 215 if (IS_ERR(usb3->dmp)) 216 return PTR_ERR(usb3->dmp); 217 218 usb3->phy = devm_phy_create(dev, NULL, &ops); 219 if (IS_ERR(usb3->phy)) { 220 dev_err(dev, "Failed to create PHY\n"); 221 return PTR_ERR(usb3->phy); 222 } 223 224 phy_set_drvdata(usb3->phy, usb3); 225 226 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); 227 228 return PTR_ERR_OR_ZERO(phy_provider); 229 } 230 231 static struct mdio_driver bcm_ns_usb3_mdio_driver = { 232 .mdiodrv = { 233 .driver = { 234 .name = "bcm_ns_mdio_usb3", 235 .of_match_table = bcm_ns_usb3_id_table, 236 }, 237 }, 238 .probe = bcm_ns_usb3_mdio_probe, 239 }; 240 241 mdio_module_driver(bcm_ns_usb3_mdio_driver); 242 243 MODULE_LICENSE("GPL v2"); 244 MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table); 245