1 #ifndef __YENTA_H 2 #define __YENTA_H 3 4 #include <asm/io.h> 5 6 #define CB_SOCKET_EVENT 0x00 7 #define CB_CSTSEVENT 0x00000001 /* Card status event */ 8 #define CB_CD1EVENT 0x00000002 /* Card detect 1 change event */ 9 #define CB_CD2EVENT 0x00000004 /* Card detect 2 change event */ 10 #define CB_PWREVENT 0x00000008 /* PWRCYCLE change event */ 11 12 #define CB_SOCKET_MASK 0x04 13 #define CB_CSTSMASK 0x00000001 /* Card status mask */ 14 #define CB_CDMASK 0x00000006 /* Card detect 1&2 mask */ 15 #define CB_PWRMASK 0x00000008 /* PWRCYCLE change mask */ 16 17 #define CB_SOCKET_STATE 0x08 18 #define CB_CARDSTS 0x00000001 /* CSTSCHG status */ 19 #define CB_CDETECT1 0x00000002 /* Card detect status 1 */ 20 #define CB_CDETECT2 0x00000004 /* Card detect status 2 */ 21 #define CB_PWRCYCLE 0x00000008 /* Socket powered */ 22 #define CB_16BITCARD 0x00000010 /* 16-bit card detected */ 23 #define CB_CBCARD 0x00000020 /* CardBus card detected */ 24 #define CB_IREQCINT 0x00000040 /* READY(xIRQ)/xCINT high */ 25 #define CB_NOTACARD 0x00000080 /* Unrecognizable PC card detected */ 26 #define CB_DATALOST 0x00000100 /* Potential data loss due to card removal */ 27 #define CB_BADVCCREQ 0x00000200 /* Invalid Vcc request by host software */ 28 #define CB_5VCARD 0x00000400 /* Card Vcc at 5.0 volts? */ 29 #define CB_3VCARD 0x00000800 /* Card Vcc at 3.3 volts? */ 30 #define CB_XVCARD 0x00001000 /* Card Vcc at X.X volts? */ 31 #define CB_YVCARD 0x00002000 /* Card Vcc at Y.Y volts? */ 32 #define CB_5VSOCKET 0x10000000 /* Socket Vcc at 5.0 volts? */ 33 #define CB_3VSOCKET 0x20000000 /* Socket Vcc at 3.3 volts? */ 34 #define CB_XVSOCKET 0x40000000 /* Socket Vcc at X.X volts? */ 35 #define CB_YVSOCKET 0x80000000 /* Socket Vcc at Y.Y volts? */ 36 37 #define CB_SOCKET_FORCE 0x0C 38 #define CB_FCARDSTS 0x00000001 /* Force CSTSCHG */ 39 #define CB_FCDETECT1 0x00000002 /* Force CD1EVENT */ 40 #define CB_FCDETECT2 0x00000004 /* Force CD2EVENT */ 41 #define CB_FPWRCYCLE 0x00000008 /* Force PWREVENT */ 42 #define CB_F16BITCARD 0x00000010 /* Force 16-bit PCMCIA card */ 43 #define CB_FCBCARD 0x00000020 /* Force CardBus line */ 44 #define CB_FNOTACARD 0x00000080 /* Force NOTACARD */ 45 #define CB_FDATALOST 0x00000100 /* Force data lost */ 46 #define CB_FBADVCCREQ 0x00000200 /* Force bad Vcc request */ 47 #define CB_F5VCARD 0x00000400 /* Force 5.0 volt card */ 48 #define CB_F3VCARD 0x00000800 /* Force 3.3 volt card */ 49 #define CB_FXVCARD 0x00001000 /* Force X.X volt card */ 50 #define CB_FYVCARD 0x00002000 /* Force Y.Y volt card */ 51 #define CB_CVSTEST 0x00004000 /* Card VS test */ 52 53 #define CB_SOCKET_CONTROL 0x10 54 #define CB_SC_VPP_MASK 0x00000007 55 #define CB_SC_VPP_OFF 0x00000000 56 #define CB_SC_VPP_12V 0x00000001 57 #define CB_SC_VPP_5V 0x00000002 58 #define CB_SC_VPP_3V 0x00000003 59 #define CB_SC_VPP_XV 0x00000004 60 #define CB_SC_VPP_YV 0x00000005 61 #define CB_SC_VCC_MASK 0x00000070 62 #define CB_SC_VCC_OFF 0x00000000 63 #define CB_SC_VCC_5V 0x00000020 64 #define CB_SC_VCC_3V 0x00000030 65 #define CB_SC_VCC_XV 0x00000040 66 #define CB_SC_VCC_YV 0x00000050 67 #define CB_SC_CCLK_STOP 0x00000080 68 69 #define CB_SOCKET_POWER 0x20 70 #define CB_SKTACCES 0x02000000 /* A PC card access has occurred (clear on read) */ 71 #define CB_SKTMODE 0x01000000 /* Clock frequency has changed (clear on read) */ 72 #define CB_CLKCTRLEN 0x00010000 /* Clock control enabled (RW) */ 73 #define CB_CLKCTRL 0x00000001 /* Stop(0) or slow(1) CB clock (RW) */ 74 75 /* 76 * Cardbus configuration space 77 */ 78 #define CB_BRIDGE_BASE(m) (0x1c + 8*(m)) 79 #define CB_BRIDGE_LIMIT(m) (0x20 + 8*(m)) 80 #define CB_BRIDGE_CONTROL 0x3e 81 #define CB_BRIDGE_CPERREN 0x00000001 82 #define CB_BRIDGE_CSERREN 0x00000002 83 #define CB_BRIDGE_ISAEN 0x00000004 84 #define CB_BRIDGE_VGAEN 0x00000008 85 #define CB_BRIDGE_MABTMODE 0x00000020 86 #define CB_BRIDGE_CRST 0x00000040 87 #define CB_BRIDGE_INTR 0x00000080 88 #define CB_BRIDGE_PREFETCH0 0x00000100 89 #define CB_BRIDGE_PREFETCH1 0x00000200 90 #define CB_BRIDGE_POSTEN 0x00000400 91 #define CB_LEGACY_MODE_BASE 0x44 92 93 /* 94 * ExCA area extensions in Yenta 95 */ 96 #define CB_MEM_PAGE(map) (0x40 + (map)) 97 98 99 /* control how 16bit cards are powered */ 100 #define YENTA_16BIT_POWER_EXCA 0x00000001 101 #define YENTA_16BIT_POWER_DF 0x00000002 102 103 104 struct yenta_socket; 105 106 struct cardbus_type { 107 int (*override)(struct yenta_socket *); 108 void (*save_state)(struct yenta_socket *); 109 void (*restore_state)(struct yenta_socket *); 110 int (*sock_init)(struct yenta_socket *); 111 }; 112 113 struct yenta_socket { 114 struct pci_dev *dev; 115 int cb_irq, io_irq; 116 void __iomem *base; 117 struct timer_list poll_timer; 118 119 struct pcmcia_socket socket; 120 struct cardbus_type *type; 121 122 u32 flags; 123 124 /* for PCI interrupt probing */ 125 unsigned int probe_status; 126 127 /* A few words of private data for special stuff of overrides... */ 128 unsigned int private[8]; 129 130 /* PCI saved state */ 131 u32 saved_state[2]; 132 }; 133 134 135 #endif 136