1 /* 2 * drivers/pcmcia/sa1100_jornada720.c 3 * 4 * Jornada720 PCMCIA specific routines 5 * 6 */ 7 #include <linux/module.h> 8 #include <linux/kernel.h> 9 #include <linux/device.h> 10 #include <linux/errno.h> 11 #include <linux/init.h> 12 #include <linux/io.h> 13 14 #include <mach/hardware.h> 15 #include <asm/hardware/sa1111.h> 16 #include <asm/mach-types.h> 17 18 #include "sa1111_generic.h" 19 20 /* Does SOCKET1_3V actually do anything? */ 21 #define SOCKET0_POWER GPIO_GPIO0 22 #define SOCKET0_3V GPIO_GPIO2 23 #define SOCKET1_POWER (GPIO_GPIO1 | GPIO_GPIO3) 24 #define SOCKET1_3V GPIO_GPIO3 25 26 static int 27 jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) 28 { 29 struct sa1111_pcmcia_socket *s = to_skt(skt); 30 unsigned int pa_dwr_mask, pa_dwr_set; 31 int ret; 32 33 printk(KERN_INFO "%s(): config socket %d vcc %d vpp %d\n", __func__, 34 skt->nr, state->Vcc, state->Vpp); 35 36 switch (skt->nr) { 37 case 0: 38 pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V; 39 40 switch (state->Vcc) { 41 default: 42 case 0: 43 pa_dwr_set = 0; 44 break; 45 case 33: 46 pa_dwr_set = SOCKET0_POWER | SOCKET0_3V; 47 break; 48 case 50: 49 pa_dwr_set = SOCKET0_POWER; 50 break; 51 } 52 break; 53 54 case 1: 55 pa_dwr_mask = SOCKET1_POWER; 56 57 switch (state->Vcc) { 58 default: 59 case 0: 60 pa_dwr_set = 0; 61 break; 62 case 33: 63 pa_dwr_set = SOCKET1_POWER; 64 break; 65 case 50: 66 pa_dwr_set = SOCKET1_POWER; 67 break; 68 } 69 break; 70 71 default: 72 return -1; 73 } 74 75 if (state->Vpp != state->Vcc && state->Vpp != 0) { 76 printk(KERN_ERR "%s(): slot cannot support VPP %u\n", 77 __func__, state->Vpp); 78 return -EPERM; 79 } 80 81 ret = sa1111_pcmcia_configure_socket(skt, state); 82 if (ret == 0) 83 sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set); 84 85 return ret; 86 } 87 88 static struct pcmcia_low_level jornada720_pcmcia_ops = { 89 .owner = THIS_MODULE, 90 .configure_socket = jornada720_pcmcia_configure_socket, 91 .first = 0, 92 .nr = 2, 93 }; 94 95 int pcmcia_jornada720_init(struct sa1111_dev *sadev) 96 { 97 unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3; 98 99 /* Fixme: why messing around with SA11x0's GPIO1? */ 100 GRER |= 0x00000002; 101 102 /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */ 103 sa1111_set_io_dir(sadev, pin, 0, 0); 104 sa1111_set_io(sadev, pin, 0); 105 sa1111_set_sleep_io(sadev, pin, 0); 106 107 sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops); 108 return sa1111_pcmcia_add(sadev, &jornada720_pcmcia_ops, 109 sa11xx_drv_pcmcia_add_one); 110 } 111