1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * PCI detection and setup code 4 */ 5 6 #include <linux/kernel.h> 7 #include <linux/delay.h> 8 #include <linux/init.h> 9 #include <linux/pci.h> 10 #include <linux/msi.h> 11 #include <linux/of_pci.h> 12 #include <linux/pci_hotplug.h> 13 #include <linux/slab.h> 14 #include <linux/module.h> 15 #include <linux/cpumask.h> 16 #include <linux/aer.h> 17 #include <linux/acpi.h> 18 #include <linux/hypervisor.h> 19 #include <linux/irqdomain.h> 20 #include <linux/pm_runtime.h> 21 #include <linux/bitfield.h> 22 #include "pci.h" 23 24 #define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */ 25 #define CARDBUS_RESERVE_BUSNR 3 26 27 static struct resource busn_resource = { 28 .name = "PCI busn", 29 .start = 0, 30 .end = 255, 31 .flags = IORESOURCE_BUS, 32 }; 33 34 /* Ugh. Need to stop exporting this to modules. */ 35 LIST_HEAD(pci_root_buses); 36 EXPORT_SYMBOL(pci_root_buses); 37 38 static LIST_HEAD(pci_domain_busn_res_list); 39 40 struct pci_domain_busn_res { 41 struct list_head list; 42 struct resource res; 43 int domain_nr; 44 }; 45 46 static struct resource *get_pci_domain_busn_res(int domain_nr) 47 { 48 struct pci_domain_busn_res *r; 49 50 list_for_each_entry(r, &pci_domain_busn_res_list, list) 51 if (r->domain_nr == domain_nr) 52 return &r->res; 53 54 r = kzalloc(sizeof(*r), GFP_KERNEL); 55 if (!r) 56 return NULL; 57 58 r->domain_nr = domain_nr; 59 r->res.start = 0; 60 r->res.end = 0xff; 61 r->res.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED; 62 63 list_add_tail(&r->list, &pci_domain_busn_res_list); 64 65 return &r->res; 66 } 67 68 /* 69 * Some device drivers need know if PCI is initiated. 70 * Basically, we think PCI is not initiated when there 71 * is no device to be found on the pci_bus_type. 72 */ 73 int no_pci_devices(void) 74 { 75 struct device *dev; 76 int no_devices; 77 78 dev = bus_find_next_device(&pci_bus_type, NULL); 79 no_devices = (dev == NULL); 80 put_device(dev); 81 return no_devices; 82 } 83 EXPORT_SYMBOL(no_pci_devices); 84 85 /* 86 * PCI Bus Class 87 */ 88 static void release_pcibus_dev(struct device *dev) 89 { 90 struct pci_bus *pci_bus = to_pci_bus(dev); 91 92 put_device(pci_bus->bridge); 93 pci_bus_remove_resources(pci_bus); 94 pci_release_bus_of_node(pci_bus); 95 kfree(pci_bus); 96 } 97 98 static struct class pcibus_class = { 99 .name = "pci_bus", 100 .dev_release = &release_pcibus_dev, 101 .dev_groups = pcibus_groups, 102 }; 103 104 static int __init pcibus_class_init(void) 105 { 106 return class_register(&pcibus_class); 107 } 108 postcore_initcall(pcibus_class_init); 109 110 static u64 pci_size(u64 base, u64 maxbase, u64 mask) 111 { 112 u64 size = mask & maxbase; /* Find the significant bits */ 113 if (!size) 114 return 0; 115 116 /* 117 * Get the lowest of them to find the decode size, and from that 118 * the extent. 119 */ 120 size = size & ~(size-1); 121 122 /* 123 * base == maxbase can be valid only if the BAR has already been 124 * programmed with all 1s. 125 */ 126 if (base == maxbase && ((base | (size - 1)) & mask) != mask) 127 return 0; 128 129 return size; 130 } 131 132 static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar) 133 { 134 u32 mem_type; 135 unsigned long flags; 136 137 if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) { 138 flags = bar & ~PCI_BASE_ADDRESS_IO_MASK; 139 flags |= IORESOURCE_IO; 140 return flags; 141 } 142 143 flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK; 144 flags |= IORESOURCE_MEM; 145 if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH) 146 flags |= IORESOURCE_PREFETCH; 147 148 mem_type = bar & PCI_BASE_ADDRESS_MEM_TYPE_MASK; 149 switch (mem_type) { 150 case PCI_BASE_ADDRESS_MEM_TYPE_32: 151 break; 152 case PCI_BASE_ADDRESS_MEM_TYPE_1M: 153 /* 1M mem BAR treated as 32-bit BAR */ 154 break; 155 case PCI_BASE_ADDRESS_MEM_TYPE_64: 156 flags |= IORESOURCE_MEM_64; 157 break; 158 default: 159 /* mem unknown type treated as 32-bit BAR */ 160 break; 161 } 162 return flags; 163 } 164 165 #define PCI_COMMAND_DECODE_ENABLE (PCI_COMMAND_MEMORY | PCI_COMMAND_IO) 166 167 /** 168 * __pci_read_base - Read a PCI BAR 169 * @dev: the PCI device 170 * @type: type of the BAR 171 * @res: resource buffer to be filled in 172 * @pos: BAR position in the config space 173 * 174 * Returns 1 if the BAR is 64-bit, or 0 if 32-bit. 175 */ 176 int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, 177 struct resource *res, unsigned int pos) 178 { 179 u32 l = 0, sz = 0, mask; 180 u64 l64, sz64, mask64; 181 u16 orig_cmd; 182 struct pci_bus_region region, inverted_region; 183 184 mask = type ? PCI_ROM_ADDRESS_MASK : ~0; 185 186 /* No printks while decoding is disabled! */ 187 if (!dev->mmio_always_on) { 188 pci_read_config_word(dev, PCI_COMMAND, &orig_cmd); 189 if (orig_cmd & PCI_COMMAND_DECODE_ENABLE) { 190 pci_write_config_word(dev, PCI_COMMAND, 191 orig_cmd & ~PCI_COMMAND_DECODE_ENABLE); 192 } 193 } 194 195 res->name = pci_name(dev); 196 197 pci_read_config_dword(dev, pos, &l); 198 pci_write_config_dword(dev, pos, l | mask); 199 pci_read_config_dword(dev, pos, &sz); 200 pci_write_config_dword(dev, pos, l); 201 202 /* 203 * All bits set in sz means the device isn't working properly. 204 * If the BAR isn't implemented, all bits must be 0. If it's a 205 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit 206 * 1 must be clear. 207 */ 208 if (PCI_POSSIBLE_ERROR(sz)) 209 sz = 0; 210 211 /* 212 * I don't know how l can have all bits set. Copied from old code. 213 * Maybe it fixes a bug on some ancient platform. 214 */ 215 if (PCI_POSSIBLE_ERROR(l)) 216 l = 0; 217 218 if (type == pci_bar_unknown) { 219 res->flags = decode_bar(dev, l); 220 res->flags |= IORESOURCE_SIZEALIGN; 221 if (res->flags & IORESOURCE_IO) { 222 l64 = l & PCI_BASE_ADDRESS_IO_MASK; 223 sz64 = sz & PCI_BASE_ADDRESS_IO_MASK; 224 mask64 = PCI_BASE_ADDRESS_IO_MASK & (u32)IO_SPACE_LIMIT; 225 } else { 226 l64 = l & PCI_BASE_ADDRESS_MEM_MASK; 227 sz64 = sz & PCI_BASE_ADDRESS_MEM_MASK; 228 mask64 = (u32)PCI_BASE_ADDRESS_MEM_MASK; 229 } 230 } else { 231 if (l & PCI_ROM_ADDRESS_ENABLE) 232 res->flags |= IORESOURCE_ROM_ENABLE; 233 l64 = l & PCI_ROM_ADDRESS_MASK; 234 sz64 = sz & PCI_ROM_ADDRESS_MASK; 235 mask64 = PCI_ROM_ADDRESS_MASK; 236 } 237 238 if (res->flags & IORESOURCE_MEM_64) { 239 pci_read_config_dword(dev, pos + 4, &l); 240 pci_write_config_dword(dev, pos + 4, ~0); 241 pci_read_config_dword(dev, pos + 4, &sz); 242 pci_write_config_dword(dev, pos + 4, l); 243 244 l64 |= ((u64)l << 32); 245 sz64 |= ((u64)sz << 32); 246 mask64 |= ((u64)~0 << 32); 247 } 248 249 if (!dev->mmio_always_on && (orig_cmd & PCI_COMMAND_DECODE_ENABLE)) 250 pci_write_config_word(dev, PCI_COMMAND, orig_cmd); 251 252 if (!sz64) 253 goto fail; 254 255 sz64 = pci_size(l64, sz64, mask64); 256 if (!sz64) { 257 pci_info(dev, FW_BUG "reg 0x%x: invalid BAR (can't size)\n", 258 pos); 259 goto fail; 260 } 261 262 if (res->flags & IORESOURCE_MEM_64) { 263 if ((sizeof(pci_bus_addr_t) < 8 || sizeof(resource_size_t) < 8) 264 && sz64 > 0x100000000ULL) { 265 res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED; 266 res->start = 0; 267 res->end = 0; 268 pci_err(dev, "reg 0x%x: can't handle BAR larger than 4GB (size %#010llx)\n", 269 pos, (unsigned long long)sz64); 270 goto out; 271 } 272 273 if ((sizeof(pci_bus_addr_t) < 8) && l) { 274 /* Above 32-bit boundary; try to reallocate */ 275 res->flags |= IORESOURCE_UNSET; 276 res->start = 0; 277 res->end = sz64 - 1; 278 pci_info(dev, "reg 0x%x: can't handle BAR above 4GB (bus address %#010llx)\n", 279 pos, (unsigned long long)l64); 280 goto out; 281 } 282 } 283 284 region.start = l64; 285 region.end = l64 + sz64 - 1; 286 287 pcibios_bus_to_resource(dev->bus, res, ®ion); 288 pcibios_resource_to_bus(dev->bus, &inverted_region, res); 289 290 /* 291 * If "A" is a BAR value (a bus address), "bus_to_resource(A)" is 292 * the corresponding resource address (the physical address used by 293 * the CPU. Converting that resource address back to a bus address 294 * should yield the original BAR value: 295 * 296 * resource_to_bus(bus_to_resource(A)) == A 297 * 298 * If it doesn't, CPU accesses to "bus_to_resource(A)" will not 299 * be claimed by the device. 300 */ 301 if (inverted_region.start != region.start) { 302 res->flags |= IORESOURCE_UNSET; 303 res->start = 0; 304 res->end = region.end - region.start; 305 pci_info(dev, "reg 0x%x: initial BAR value %#010llx invalid\n", 306 pos, (unsigned long long)region.start); 307 } 308 309 goto out; 310 311 312 fail: 313 res->flags = 0; 314 out: 315 if (res->flags) 316 pci_info(dev, "reg 0x%x: %pR\n", pos, res); 317 318 return (res->flags & IORESOURCE_MEM_64) ? 1 : 0; 319 } 320 321 static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) 322 { 323 unsigned int pos, reg; 324 325 if (dev->non_compliant_bars) 326 return; 327 328 /* Per PCIe r4.0, sec 9.3.4.1.11, the VF BARs are all RO Zero */ 329 if (dev->is_virtfn) 330 return; 331 332 for (pos = 0; pos < howmany; pos++) { 333 struct resource *res = &dev->resource[pos]; 334 reg = PCI_BASE_ADDRESS_0 + (pos << 2); 335 pos += __pci_read_base(dev, pci_bar_unknown, res, reg); 336 } 337 338 if (rom) { 339 struct resource *res = &dev->resource[PCI_ROM_RESOURCE]; 340 dev->rom_base_reg = rom; 341 res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH | 342 IORESOURCE_READONLY | IORESOURCE_SIZEALIGN; 343 __pci_read_base(dev, pci_bar_mem32, res, rom); 344 } 345 } 346 347 static void pci_read_bridge_windows(struct pci_dev *bridge) 348 { 349 u16 io; 350 u32 pmem, tmp; 351 352 pci_read_config_word(bridge, PCI_IO_BASE, &io); 353 if (!io) { 354 pci_write_config_word(bridge, PCI_IO_BASE, 0xe0f0); 355 pci_read_config_word(bridge, PCI_IO_BASE, &io); 356 pci_write_config_word(bridge, PCI_IO_BASE, 0x0); 357 } 358 if (io) 359 bridge->io_window = 1; 360 361 /* 362 * DECchip 21050 pass 2 errata: the bridge may miss an address 363 * disconnect boundary by one PCI data phase. Workaround: do not 364 * use prefetching on this device. 365 */ 366 if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001) 367 return; 368 369 pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem); 370 if (!pmem) { 371 pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 372 0xffe0fff0); 373 pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem); 374 pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0); 375 } 376 if (!pmem) 377 return; 378 379 bridge->pref_window = 1; 380 381 if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) { 382 383 /* 384 * Bridge claims to have a 64-bit prefetchable memory 385 * window; verify that the upper bits are actually 386 * writable. 387 */ 388 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &pmem); 389 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, 390 0xffffffff); 391 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp); 392 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, pmem); 393 if (tmp) 394 bridge->pref_64_window = 1; 395 } 396 } 397 398 static void pci_read_bridge_io(struct pci_bus *child) 399 { 400 struct pci_dev *dev = child->self; 401 u8 io_base_lo, io_limit_lo; 402 unsigned long io_mask, io_granularity, base, limit; 403 struct pci_bus_region region; 404 struct resource *res; 405 406 io_mask = PCI_IO_RANGE_MASK; 407 io_granularity = 0x1000; 408 if (dev->io_window_1k) { 409 /* Support 1K I/O space granularity */ 410 io_mask = PCI_IO_1K_RANGE_MASK; 411 io_granularity = 0x400; 412 } 413 414 res = child->resource[0]; 415 pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); 416 pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo); 417 base = (io_base_lo & io_mask) << 8; 418 limit = (io_limit_lo & io_mask) << 8; 419 420 if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) { 421 u16 io_base_hi, io_limit_hi; 422 423 pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi); 424 pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi); 425 base |= ((unsigned long) io_base_hi << 16); 426 limit |= ((unsigned long) io_limit_hi << 16); 427 } 428 429 if (base <= limit) { 430 res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO; 431 region.start = base; 432 region.end = limit + io_granularity - 1; 433 pcibios_bus_to_resource(dev->bus, res, ®ion); 434 pci_info(dev, " bridge window %pR\n", res); 435 } 436 } 437 438 static void pci_read_bridge_mmio(struct pci_bus *child) 439 { 440 struct pci_dev *dev = child->self; 441 u16 mem_base_lo, mem_limit_lo; 442 unsigned long base, limit; 443 struct pci_bus_region region; 444 struct resource *res; 445 446 res = child->resource[1]; 447 pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo); 448 pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo); 449 base = ((unsigned long) mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16; 450 limit = ((unsigned long) mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16; 451 if (base <= limit) { 452 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; 453 region.start = base; 454 region.end = limit + 0xfffff; 455 pcibios_bus_to_resource(dev->bus, res, ®ion); 456 pci_info(dev, " bridge window %pR\n", res); 457 } 458 } 459 460 static void pci_read_bridge_mmio_pref(struct pci_bus *child) 461 { 462 struct pci_dev *dev = child->self; 463 u16 mem_base_lo, mem_limit_lo; 464 u64 base64, limit64; 465 pci_bus_addr_t base, limit; 466 struct pci_bus_region region; 467 struct resource *res; 468 469 res = child->resource[2]; 470 pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo); 471 pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo); 472 base64 = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16; 473 limit64 = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16; 474 475 if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) { 476 u32 mem_base_hi, mem_limit_hi; 477 478 pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi); 479 pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi); 480 481 /* 482 * Some bridges set the base > limit by default, and some 483 * (broken) BIOSes do not initialize them. If we find 484 * this, just assume they are not being used. 485 */ 486 if (mem_base_hi <= mem_limit_hi) { 487 base64 |= (u64) mem_base_hi << 32; 488 limit64 |= (u64) mem_limit_hi << 32; 489 } 490 } 491 492 base = (pci_bus_addr_t) base64; 493 limit = (pci_bus_addr_t) limit64; 494 495 if (base != base64) { 496 pci_err(dev, "can't handle bridge window above 4GB (bus address %#010llx)\n", 497 (unsigned long long) base64); 498 return; 499 } 500 501 if (base <= limit) { 502 res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) | 503 IORESOURCE_MEM | IORESOURCE_PREFETCH; 504 if (res->flags & PCI_PREF_RANGE_TYPE_64) 505 res->flags |= IORESOURCE_MEM_64; 506 region.start = base; 507 region.end = limit + 0xfffff; 508 pcibios_bus_to_resource(dev->bus, res, ®ion); 509 pci_info(dev, " bridge window %pR\n", res); 510 } 511 } 512 513 void pci_read_bridge_bases(struct pci_bus *child) 514 { 515 struct pci_dev *dev = child->self; 516 struct resource *res; 517 int i; 518 519 if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */ 520 return; 521 522 pci_info(dev, "PCI bridge to %pR%s\n", 523 &child->busn_res, 524 dev->transparent ? " (subtractive decode)" : ""); 525 526 pci_bus_remove_resources(child); 527 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) 528 child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i]; 529 530 pci_read_bridge_io(child); 531 pci_read_bridge_mmio(child); 532 pci_read_bridge_mmio_pref(child); 533 534 if (dev->transparent) { 535 pci_bus_for_each_resource(child->parent, res) { 536 if (res && res->flags) { 537 pci_bus_add_resource(child, res, 538 PCI_SUBTRACTIVE_DECODE); 539 pci_info(dev, " bridge window %pR (subtractive decode)\n", 540 res); 541 } 542 } 543 } 544 } 545 546 static struct pci_bus *pci_alloc_bus(struct pci_bus *parent) 547 { 548 struct pci_bus *b; 549 550 b = kzalloc(sizeof(*b), GFP_KERNEL); 551 if (!b) 552 return NULL; 553 554 INIT_LIST_HEAD(&b->node); 555 INIT_LIST_HEAD(&b->children); 556 INIT_LIST_HEAD(&b->devices); 557 INIT_LIST_HEAD(&b->slots); 558 INIT_LIST_HEAD(&b->resources); 559 b->max_bus_speed = PCI_SPEED_UNKNOWN; 560 b->cur_bus_speed = PCI_SPEED_UNKNOWN; 561 #ifdef CONFIG_PCI_DOMAINS_GENERIC 562 if (parent) 563 b->domain_nr = parent->domain_nr; 564 #endif 565 return b; 566 } 567 568 static void pci_release_host_bridge_dev(struct device *dev) 569 { 570 struct pci_host_bridge *bridge = to_pci_host_bridge(dev); 571 572 if (bridge->release_fn) 573 bridge->release_fn(bridge); 574 575 pci_free_resource_list(&bridge->windows); 576 pci_free_resource_list(&bridge->dma_ranges); 577 kfree(bridge); 578 } 579 580 static void pci_init_host_bridge(struct pci_host_bridge *bridge) 581 { 582 INIT_LIST_HEAD(&bridge->windows); 583 INIT_LIST_HEAD(&bridge->dma_ranges); 584 585 /* 586 * We assume we can manage these PCIe features. Some systems may 587 * reserve these for use by the platform itself, e.g., an ACPI BIOS 588 * may implement its own AER handling and use _OSC to prevent the 589 * OS from interfering. 590 */ 591 bridge->native_aer = 1; 592 bridge->native_pcie_hotplug = 1; 593 bridge->native_shpc_hotplug = 1; 594 bridge->native_pme = 1; 595 bridge->native_ltr = 1; 596 bridge->native_dpc = 1; 597 bridge->domain_nr = PCI_DOMAIN_NR_NOT_SET; 598 bridge->native_cxl_error = 1; 599 600 device_initialize(&bridge->dev); 601 } 602 603 struct pci_host_bridge *pci_alloc_host_bridge(size_t priv) 604 { 605 struct pci_host_bridge *bridge; 606 607 bridge = kzalloc(sizeof(*bridge) + priv, GFP_KERNEL); 608 if (!bridge) 609 return NULL; 610 611 pci_init_host_bridge(bridge); 612 bridge->dev.release = pci_release_host_bridge_dev; 613 614 return bridge; 615 } 616 EXPORT_SYMBOL(pci_alloc_host_bridge); 617 618 static void devm_pci_alloc_host_bridge_release(void *data) 619 { 620 pci_free_host_bridge(data); 621 } 622 623 struct pci_host_bridge *devm_pci_alloc_host_bridge(struct device *dev, 624 size_t priv) 625 { 626 int ret; 627 struct pci_host_bridge *bridge; 628 629 bridge = pci_alloc_host_bridge(priv); 630 if (!bridge) 631 return NULL; 632 633 bridge->dev.parent = dev; 634 635 ret = devm_add_action_or_reset(dev, devm_pci_alloc_host_bridge_release, 636 bridge); 637 if (ret) 638 return NULL; 639 640 ret = devm_of_pci_bridge_init(dev, bridge); 641 if (ret) 642 return NULL; 643 644 return bridge; 645 } 646 EXPORT_SYMBOL(devm_pci_alloc_host_bridge); 647 648 void pci_free_host_bridge(struct pci_host_bridge *bridge) 649 { 650 put_device(&bridge->dev); 651 } 652 EXPORT_SYMBOL(pci_free_host_bridge); 653 654 /* Indexed by PCI_X_SSTATUS_FREQ (secondary bus mode and frequency) */ 655 static const unsigned char pcix_bus_speed[] = { 656 PCI_SPEED_UNKNOWN, /* 0 */ 657 PCI_SPEED_66MHz_PCIX, /* 1 */ 658 PCI_SPEED_100MHz_PCIX, /* 2 */ 659 PCI_SPEED_133MHz_PCIX, /* 3 */ 660 PCI_SPEED_UNKNOWN, /* 4 */ 661 PCI_SPEED_66MHz_PCIX_ECC, /* 5 */ 662 PCI_SPEED_100MHz_PCIX_ECC, /* 6 */ 663 PCI_SPEED_133MHz_PCIX_ECC, /* 7 */ 664 PCI_SPEED_UNKNOWN, /* 8 */ 665 PCI_SPEED_66MHz_PCIX_266, /* 9 */ 666 PCI_SPEED_100MHz_PCIX_266, /* A */ 667 PCI_SPEED_133MHz_PCIX_266, /* B */ 668 PCI_SPEED_UNKNOWN, /* C */ 669 PCI_SPEED_66MHz_PCIX_533, /* D */ 670 PCI_SPEED_100MHz_PCIX_533, /* E */ 671 PCI_SPEED_133MHz_PCIX_533 /* F */ 672 }; 673 674 /* Indexed by PCI_EXP_LNKCAP_SLS, PCI_EXP_LNKSTA_CLS */ 675 const unsigned char pcie_link_speed[] = { 676 PCI_SPEED_UNKNOWN, /* 0 */ 677 PCIE_SPEED_2_5GT, /* 1 */ 678 PCIE_SPEED_5_0GT, /* 2 */ 679 PCIE_SPEED_8_0GT, /* 3 */ 680 PCIE_SPEED_16_0GT, /* 4 */ 681 PCIE_SPEED_32_0GT, /* 5 */ 682 PCIE_SPEED_64_0GT, /* 6 */ 683 PCI_SPEED_UNKNOWN, /* 7 */ 684 PCI_SPEED_UNKNOWN, /* 8 */ 685 PCI_SPEED_UNKNOWN, /* 9 */ 686 PCI_SPEED_UNKNOWN, /* A */ 687 PCI_SPEED_UNKNOWN, /* B */ 688 PCI_SPEED_UNKNOWN, /* C */ 689 PCI_SPEED_UNKNOWN, /* D */ 690 PCI_SPEED_UNKNOWN, /* E */ 691 PCI_SPEED_UNKNOWN /* F */ 692 }; 693 EXPORT_SYMBOL_GPL(pcie_link_speed); 694 695 const char *pci_speed_string(enum pci_bus_speed speed) 696 { 697 /* Indexed by the pci_bus_speed enum */ 698 static const char *speed_strings[] = { 699 "33 MHz PCI", /* 0x00 */ 700 "66 MHz PCI", /* 0x01 */ 701 "66 MHz PCI-X", /* 0x02 */ 702 "100 MHz PCI-X", /* 0x03 */ 703 "133 MHz PCI-X", /* 0x04 */ 704 NULL, /* 0x05 */ 705 NULL, /* 0x06 */ 706 NULL, /* 0x07 */ 707 NULL, /* 0x08 */ 708 "66 MHz PCI-X 266", /* 0x09 */ 709 "100 MHz PCI-X 266", /* 0x0a */ 710 "133 MHz PCI-X 266", /* 0x0b */ 711 "Unknown AGP", /* 0x0c */ 712 "1x AGP", /* 0x0d */ 713 "2x AGP", /* 0x0e */ 714 "4x AGP", /* 0x0f */ 715 "8x AGP", /* 0x10 */ 716 "66 MHz PCI-X 533", /* 0x11 */ 717 "100 MHz PCI-X 533", /* 0x12 */ 718 "133 MHz PCI-X 533", /* 0x13 */ 719 "2.5 GT/s PCIe", /* 0x14 */ 720 "5.0 GT/s PCIe", /* 0x15 */ 721 "8.0 GT/s PCIe", /* 0x16 */ 722 "16.0 GT/s PCIe", /* 0x17 */ 723 "32.0 GT/s PCIe", /* 0x18 */ 724 "64.0 GT/s PCIe", /* 0x19 */ 725 }; 726 727 if (speed < ARRAY_SIZE(speed_strings)) 728 return speed_strings[speed]; 729 return "Unknown"; 730 } 731 EXPORT_SYMBOL_GPL(pci_speed_string); 732 733 void pcie_update_link_speed(struct pci_bus *bus, u16 linksta) 734 { 735 bus->cur_bus_speed = pcie_link_speed[linksta & PCI_EXP_LNKSTA_CLS]; 736 } 737 EXPORT_SYMBOL_GPL(pcie_update_link_speed); 738 739 static unsigned char agp_speeds[] = { 740 AGP_UNKNOWN, 741 AGP_1X, 742 AGP_2X, 743 AGP_4X, 744 AGP_8X 745 }; 746 747 static enum pci_bus_speed agp_speed(int agp3, int agpstat) 748 { 749 int index = 0; 750 751 if (agpstat & 4) 752 index = 3; 753 else if (agpstat & 2) 754 index = 2; 755 else if (agpstat & 1) 756 index = 1; 757 else 758 goto out; 759 760 if (agp3) { 761 index += 2; 762 if (index == 5) 763 index = 0; 764 } 765 766 out: 767 return agp_speeds[index]; 768 } 769 770 static void pci_set_bus_speed(struct pci_bus *bus) 771 { 772 struct pci_dev *bridge = bus->self; 773 int pos; 774 775 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP); 776 if (!pos) 777 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3); 778 if (pos) { 779 u32 agpstat, agpcmd; 780 781 pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat); 782 bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7); 783 784 pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd); 785 bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7); 786 } 787 788 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX); 789 if (pos) { 790 u16 status; 791 enum pci_bus_speed max; 792 793 pci_read_config_word(bridge, pos + PCI_X_BRIDGE_SSTATUS, 794 &status); 795 796 if (status & PCI_X_SSTATUS_533MHZ) { 797 max = PCI_SPEED_133MHz_PCIX_533; 798 } else if (status & PCI_X_SSTATUS_266MHZ) { 799 max = PCI_SPEED_133MHz_PCIX_266; 800 } else if (status & PCI_X_SSTATUS_133MHZ) { 801 if ((status & PCI_X_SSTATUS_VERS) == PCI_X_SSTATUS_V2) 802 max = PCI_SPEED_133MHz_PCIX_ECC; 803 else 804 max = PCI_SPEED_133MHz_PCIX; 805 } else { 806 max = PCI_SPEED_66MHz_PCIX; 807 } 808 809 bus->max_bus_speed = max; 810 bus->cur_bus_speed = 811 pcix_bus_speed[FIELD_GET(PCI_X_SSTATUS_FREQ, status)]; 812 813 return; 814 } 815 816 if (pci_is_pcie(bridge)) { 817 u32 linkcap; 818 u16 linksta; 819 820 pcie_capability_read_dword(bridge, PCI_EXP_LNKCAP, &linkcap); 821 bus->max_bus_speed = pcie_link_speed[linkcap & PCI_EXP_LNKCAP_SLS]; 822 823 pcie_capability_read_word(bridge, PCI_EXP_LNKSTA, &linksta); 824 pcie_update_link_speed(bus, linksta); 825 } 826 } 827 828 static struct irq_domain *pci_host_bridge_msi_domain(struct pci_bus *bus) 829 { 830 struct irq_domain *d; 831 832 /* If the host bridge driver sets a MSI domain of the bridge, use it */ 833 d = dev_get_msi_domain(bus->bridge); 834 835 /* 836 * Any firmware interface that can resolve the msi_domain 837 * should be called from here. 838 */ 839 if (!d) 840 d = pci_host_bridge_of_msi_domain(bus); 841 if (!d) 842 d = pci_host_bridge_acpi_msi_domain(bus); 843 844 /* 845 * If no IRQ domain was found via the OF tree, try looking it up 846 * directly through the fwnode_handle. 847 */ 848 if (!d) { 849 struct fwnode_handle *fwnode = pci_root_bus_fwnode(bus); 850 851 if (fwnode) 852 d = irq_find_matching_fwnode(fwnode, 853 DOMAIN_BUS_PCI_MSI); 854 } 855 856 return d; 857 } 858 859 static void pci_set_bus_msi_domain(struct pci_bus *bus) 860 { 861 struct irq_domain *d; 862 struct pci_bus *b; 863 864 /* 865 * The bus can be a root bus, a subordinate bus, or a virtual bus 866 * created by an SR-IOV device. Walk up to the first bridge device 867 * found or derive the domain from the host bridge. 868 */ 869 for (b = bus, d = NULL; !d && !pci_is_root_bus(b); b = b->parent) { 870 if (b->self) 871 d = dev_get_msi_domain(&b->self->dev); 872 } 873 874 if (!d) 875 d = pci_host_bridge_msi_domain(b); 876 877 dev_set_msi_domain(&bus->dev, d); 878 } 879 880 static int pci_register_host_bridge(struct pci_host_bridge *bridge) 881 { 882 struct device *parent = bridge->dev.parent; 883 struct resource_entry *window, *next, *n; 884 struct pci_bus *bus, *b; 885 resource_size_t offset, next_offset; 886 LIST_HEAD(resources); 887 struct resource *res, *next_res; 888 char addr[64], *fmt; 889 const char *name; 890 int err; 891 892 bus = pci_alloc_bus(NULL); 893 if (!bus) 894 return -ENOMEM; 895 896 bridge->bus = bus; 897 898 bus->sysdata = bridge->sysdata; 899 bus->ops = bridge->ops; 900 bus->number = bus->busn_res.start = bridge->busnr; 901 #ifdef CONFIG_PCI_DOMAINS_GENERIC 902 if (bridge->domain_nr == PCI_DOMAIN_NR_NOT_SET) 903 bus->domain_nr = pci_bus_find_domain_nr(bus, parent); 904 else 905 bus->domain_nr = bridge->domain_nr; 906 if (bus->domain_nr < 0) { 907 err = bus->domain_nr; 908 goto free; 909 } 910 #endif 911 912 b = pci_find_bus(pci_domain_nr(bus), bridge->busnr); 913 if (b) { 914 /* Ignore it if we already got here via a different bridge */ 915 dev_dbg(&b->dev, "bus already known\n"); 916 err = -EEXIST; 917 goto free; 918 } 919 920 dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(bus), 921 bridge->busnr); 922 923 err = pcibios_root_bridge_prepare(bridge); 924 if (err) 925 goto free; 926 927 /* Temporarily move resources off the list */ 928 list_splice_init(&bridge->windows, &resources); 929 err = device_add(&bridge->dev); 930 if (err) { 931 put_device(&bridge->dev); 932 goto free; 933 } 934 bus->bridge = get_device(&bridge->dev); 935 device_enable_async_suspend(bus->bridge); 936 pci_set_bus_of_node(bus); 937 pci_set_bus_msi_domain(bus); 938 if (bridge->msi_domain && !dev_get_msi_domain(&bus->dev) && 939 !pci_host_of_has_msi_map(parent)) 940 bus->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 941 942 if (!parent) 943 set_dev_node(bus->bridge, pcibus_to_node(bus)); 944 945 bus->dev.class = &pcibus_class; 946 bus->dev.parent = bus->bridge; 947 948 dev_set_name(&bus->dev, "%04x:%02x", pci_domain_nr(bus), bus->number); 949 name = dev_name(&bus->dev); 950 951 err = device_register(&bus->dev); 952 if (err) 953 goto unregister; 954 955 pcibios_add_bus(bus); 956 957 if (bus->ops->add_bus) { 958 err = bus->ops->add_bus(bus); 959 if (WARN_ON(err < 0)) 960 dev_err(&bus->dev, "failed to add bus: %d\n", err); 961 } 962 963 /* Create legacy_io and legacy_mem files for this bus */ 964 pci_create_legacy_files(bus); 965 966 if (parent) 967 dev_info(parent, "PCI host bridge to bus %s\n", name); 968 else 969 pr_info("PCI host bridge to bus %s\n", name); 970 971 if (nr_node_ids > 1 && pcibus_to_node(bus) == NUMA_NO_NODE) 972 dev_warn(&bus->dev, "Unknown NUMA node; performance will be reduced\n"); 973 974 /* Coalesce contiguous windows */ 975 resource_list_for_each_entry_safe(window, n, &resources) { 976 if (list_is_last(&window->node, &resources)) 977 break; 978 979 next = list_next_entry(window, node); 980 offset = window->offset; 981 res = window->res; 982 next_offset = next->offset; 983 next_res = next->res; 984 985 if (res->flags != next_res->flags || offset != next_offset) 986 continue; 987 988 if (res->end + 1 == next_res->start) { 989 next_res->start = res->start; 990 res->flags = res->start = res->end = 0; 991 } 992 } 993 994 /* Add initial resources to the bus */ 995 resource_list_for_each_entry_safe(window, n, &resources) { 996 offset = window->offset; 997 res = window->res; 998 if (!res->flags && !res->start && !res->end) { 999 release_resource(res); 1000 resource_list_destroy_entry(window); 1001 continue; 1002 } 1003 1004 list_move_tail(&window->node, &bridge->windows); 1005 1006 if (res->flags & IORESOURCE_BUS) 1007 pci_bus_insert_busn_res(bus, bus->number, res->end); 1008 else 1009 pci_bus_add_resource(bus, res, 0); 1010 1011 if (offset) { 1012 if (resource_type(res) == IORESOURCE_IO) 1013 fmt = " (bus address [%#06llx-%#06llx])"; 1014 else 1015 fmt = " (bus address [%#010llx-%#010llx])"; 1016 1017 snprintf(addr, sizeof(addr), fmt, 1018 (unsigned long long)(res->start - offset), 1019 (unsigned long long)(res->end - offset)); 1020 } else 1021 addr[0] = '\0'; 1022 1023 dev_info(&bus->dev, "root bus resource %pR%s\n", res, addr); 1024 } 1025 1026 down_write(&pci_bus_sem); 1027 list_add_tail(&bus->node, &pci_root_buses); 1028 up_write(&pci_bus_sem); 1029 1030 return 0; 1031 1032 unregister: 1033 put_device(&bridge->dev); 1034 device_del(&bridge->dev); 1035 1036 free: 1037 #ifdef CONFIG_PCI_DOMAINS_GENERIC 1038 pci_bus_release_domain_nr(bus, parent); 1039 #endif 1040 kfree(bus); 1041 return err; 1042 } 1043 1044 static bool pci_bridge_child_ext_cfg_accessible(struct pci_dev *bridge) 1045 { 1046 int pos; 1047 u32 status; 1048 1049 /* 1050 * If extended config space isn't accessible on a bridge's primary 1051 * bus, we certainly can't access it on the secondary bus. 1052 */ 1053 if (bridge->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG) 1054 return false; 1055 1056 /* 1057 * PCIe Root Ports and switch ports are PCIe on both sides, so if 1058 * extended config space is accessible on the primary, it's also 1059 * accessible on the secondary. 1060 */ 1061 if (pci_is_pcie(bridge) && 1062 (pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT || 1063 pci_pcie_type(bridge) == PCI_EXP_TYPE_UPSTREAM || 1064 pci_pcie_type(bridge) == PCI_EXP_TYPE_DOWNSTREAM)) 1065 return true; 1066 1067 /* 1068 * For the other bridge types: 1069 * - PCI-to-PCI bridges 1070 * - PCIe-to-PCI/PCI-X forward bridges 1071 * - PCI/PCI-X-to-PCIe reverse bridges 1072 * extended config space on the secondary side is only accessible 1073 * if the bridge supports PCI-X Mode 2. 1074 */ 1075 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX); 1076 if (!pos) 1077 return false; 1078 1079 pci_read_config_dword(bridge, pos + PCI_X_STATUS, &status); 1080 return status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ); 1081 } 1082 1083 static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, 1084 struct pci_dev *bridge, int busnr) 1085 { 1086 struct pci_bus *child; 1087 struct pci_host_bridge *host; 1088 int i; 1089 int ret; 1090 1091 /* Allocate a new bus and inherit stuff from the parent */ 1092 child = pci_alloc_bus(parent); 1093 if (!child) 1094 return NULL; 1095 1096 child->parent = parent; 1097 child->sysdata = parent->sysdata; 1098 child->bus_flags = parent->bus_flags; 1099 1100 host = pci_find_host_bridge(parent); 1101 if (host->child_ops) 1102 child->ops = host->child_ops; 1103 else 1104 child->ops = parent->ops; 1105 1106 /* 1107 * Initialize some portions of the bus device, but don't register 1108 * it now as the parent is not properly set up yet. 1109 */ 1110 child->dev.class = &pcibus_class; 1111 dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr); 1112 1113 /* Set up the primary, secondary and subordinate bus numbers */ 1114 child->number = child->busn_res.start = busnr; 1115 child->primary = parent->busn_res.start; 1116 child->busn_res.end = 0xff; 1117 1118 if (!bridge) { 1119 child->dev.parent = parent->bridge; 1120 goto add_dev; 1121 } 1122 1123 child->self = bridge; 1124 child->bridge = get_device(&bridge->dev); 1125 child->dev.parent = child->bridge; 1126 pci_set_bus_of_node(child); 1127 pci_set_bus_speed(child); 1128 1129 /* 1130 * Check whether extended config space is accessible on the child 1131 * bus. Note that we currently assume it is always accessible on 1132 * the root bus. 1133 */ 1134 if (!pci_bridge_child_ext_cfg_accessible(bridge)) { 1135 child->bus_flags |= PCI_BUS_FLAGS_NO_EXTCFG; 1136 pci_info(child, "extended config space not accessible\n"); 1137 } 1138 1139 /* Set up default resource pointers and names */ 1140 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) { 1141 child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i]; 1142 child->resource[i]->name = child->name; 1143 } 1144 bridge->subordinate = child; 1145 1146 add_dev: 1147 pci_set_bus_msi_domain(child); 1148 ret = device_register(&child->dev); 1149 WARN_ON(ret < 0); 1150 1151 pcibios_add_bus(child); 1152 1153 if (child->ops->add_bus) { 1154 ret = child->ops->add_bus(child); 1155 if (WARN_ON(ret < 0)) 1156 dev_err(&child->dev, "failed to add bus: %d\n", ret); 1157 } 1158 1159 /* Create legacy_io and legacy_mem files for this bus */ 1160 pci_create_legacy_files(child); 1161 1162 return child; 1163 } 1164 1165 struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, 1166 int busnr) 1167 { 1168 struct pci_bus *child; 1169 1170 child = pci_alloc_child_bus(parent, dev, busnr); 1171 if (child) { 1172 down_write(&pci_bus_sem); 1173 list_add_tail(&child->node, &parent->children); 1174 up_write(&pci_bus_sem); 1175 } 1176 return child; 1177 } 1178 EXPORT_SYMBOL(pci_add_new_bus); 1179 1180 static void pci_enable_crs(struct pci_dev *pdev) 1181 { 1182 u16 root_cap = 0; 1183 1184 /* Enable CRS Software Visibility if supported */ 1185 pcie_capability_read_word(pdev, PCI_EXP_RTCAP, &root_cap); 1186 if (root_cap & PCI_EXP_RTCAP_CRSVIS) 1187 pcie_capability_set_word(pdev, PCI_EXP_RTCTL, 1188 PCI_EXP_RTCTL_CRSSVE); 1189 } 1190 1191 static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus, 1192 unsigned int available_buses); 1193 /** 1194 * pci_ea_fixed_busnrs() - Read fixed Secondary and Subordinate bus 1195 * numbers from EA capability. 1196 * @dev: Bridge 1197 * @sec: updated with secondary bus number from EA 1198 * @sub: updated with subordinate bus number from EA 1199 * 1200 * If @dev is a bridge with EA capability that specifies valid secondary 1201 * and subordinate bus numbers, return true with the bus numbers in @sec 1202 * and @sub. Otherwise return false. 1203 */ 1204 static bool pci_ea_fixed_busnrs(struct pci_dev *dev, u8 *sec, u8 *sub) 1205 { 1206 int ea, offset; 1207 u32 dw; 1208 u8 ea_sec, ea_sub; 1209 1210 if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) 1211 return false; 1212 1213 /* find PCI EA capability in list */ 1214 ea = pci_find_capability(dev, PCI_CAP_ID_EA); 1215 if (!ea) 1216 return false; 1217 1218 offset = ea + PCI_EA_FIRST_ENT; 1219 pci_read_config_dword(dev, offset, &dw); 1220 ea_sec = FIELD_GET(PCI_EA_SEC_BUS_MASK, dw); 1221 ea_sub = FIELD_GET(PCI_EA_SUB_BUS_MASK, dw); 1222 if (ea_sec == 0 || ea_sub < ea_sec) 1223 return false; 1224 1225 *sec = ea_sec; 1226 *sub = ea_sub; 1227 return true; 1228 } 1229 1230 /* 1231 * pci_scan_bridge_extend() - Scan buses behind a bridge 1232 * @bus: Parent bus the bridge is on 1233 * @dev: Bridge itself 1234 * @max: Starting subordinate number of buses behind this bridge 1235 * @available_buses: Total number of buses available for this bridge and 1236 * the devices below. After the minimal bus space has 1237 * been allocated the remaining buses will be 1238 * distributed equally between hotplug-capable bridges. 1239 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges 1240 * that need to be reconfigured. 1241 * 1242 * If it's a bridge, configure it and scan the bus behind it. 1243 * For CardBus bridges, we don't scan behind as the devices will 1244 * be handled by the bridge driver itself. 1245 * 1246 * We need to process bridges in two passes -- first we scan those 1247 * already configured by the BIOS and after we are done with all of 1248 * them, we proceed to assigning numbers to the remaining buses in 1249 * order to avoid overlaps between old and new bus numbers. 1250 * 1251 * Return: New subordinate number covering all buses behind this bridge. 1252 */ 1253 static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev, 1254 int max, unsigned int available_buses, 1255 int pass) 1256 { 1257 struct pci_bus *child; 1258 int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); 1259 u32 buses, i, j = 0; 1260 u16 bctl; 1261 u8 primary, secondary, subordinate; 1262 int broken = 0; 1263 bool fixed_buses; 1264 u8 fixed_sec, fixed_sub; 1265 int next_busnr; 1266 1267 /* 1268 * Make sure the bridge is powered on to be able to access config 1269 * space of devices below it. 1270 */ 1271 pm_runtime_get_sync(&dev->dev); 1272 1273 pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses); 1274 primary = buses & 0xFF; 1275 secondary = (buses >> 8) & 0xFF; 1276 subordinate = (buses >> 16) & 0xFF; 1277 1278 pci_dbg(dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n", 1279 secondary, subordinate, pass); 1280 1281 if (!primary && (primary != bus->number) && secondary && subordinate) { 1282 pci_warn(dev, "Primary bus is hard wired to 0\n"); 1283 primary = bus->number; 1284 } 1285 1286 /* Check if setup is sensible at all */ 1287 if (!pass && 1288 (primary != bus->number || secondary <= bus->number || 1289 secondary > subordinate)) { 1290 pci_info(dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n", 1291 secondary, subordinate); 1292 broken = 1; 1293 } 1294 1295 /* 1296 * Disable Master-Abort Mode during probing to avoid reporting of 1297 * bus errors in some architectures. 1298 */ 1299 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); 1300 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, 1301 bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); 1302 1303 pci_enable_crs(dev); 1304 1305 if ((secondary || subordinate) && !pcibios_assign_all_busses() && 1306 !is_cardbus && !broken) { 1307 unsigned int cmax, buses; 1308 1309 /* 1310 * Bus already configured by firmware, process it in the 1311 * first pass and just note the configuration. 1312 */ 1313 if (pass) 1314 goto out; 1315 1316 /* 1317 * The bus might already exist for two reasons: Either we 1318 * are rescanning the bus or the bus is reachable through 1319 * more than one bridge. The second case can happen with 1320 * the i450NX chipset. 1321 */ 1322 child = pci_find_bus(pci_domain_nr(bus), secondary); 1323 if (!child) { 1324 child = pci_add_new_bus(bus, dev, secondary); 1325 if (!child) 1326 goto out; 1327 child->primary = primary; 1328 pci_bus_insert_busn_res(child, secondary, subordinate); 1329 child->bridge_ctl = bctl; 1330 } 1331 1332 buses = subordinate - secondary; 1333 cmax = pci_scan_child_bus_extend(child, buses); 1334 if (cmax > subordinate) 1335 pci_warn(dev, "bridge has subordinate %02x but max busn %02x\n", 1336 subordinate, cmax); 1337 1338 /* Subordinate should equal child->busn_res.end */ 1339 if (subordinate > max) 1340 max = subordinate; 1341 } else { 1342 1343 /* 1344 * We need to assign a number to this bus which we always 1345 * do in the second pass. 1346 */ 1347 if (!pass) { 1348 if (pcibios_assign_all_busses() || broken || is_cardbus) 1349 1350 /* 1351 * Temporarily disable forwarding of the 1352 * configuration cycles on all bridges in 1353 * this bus segment to avoid possible 1354 * conflicts in the second pass between two 1355 * bridges programmed with overlapping bus 1356 * ranges. 1357 */ 1358 pci_write_config_dword(dev, PCI_PRIMARY_BUS, 1359 buses & ~0xffffff); 1360 goto out; 1361 } 1362 1363 /* Clear errors */ 1364 pci_write_config_word(dev, PCI_STATUS, 0xffff); 1365 1366 /* Read bus numbers from EA Capability (if present) */ 1367 fixed_buses = pci_ea_fixed_busnrs(dev, &fixed_sec, &fixed_sub); 1368 if (fixed_buses) 1369 next_busnr = fixed_sec; 1370 else 1371 next_busnr = max + 1; 1372 1373 /* 1374 * Prevent assigning a bus number that already exists. 1375 * This can happen when a bridge is hot-plugged, so in this 1376 * case we only re-scan this bus. 1377 */ 1378 child = pci_find_bus(pci_domain_nr(bus), next_busnr); 1379 if (!child) { 1380 child = pci_add_new_bus(bus, dev, next_busnr); 1381 if (!child) 1382 goto out; 1383 pci_bus_insert_busn_res(child, next_busnr, 1384 bus->busn_res.end); 1385 } 1386 max++; 1387 if (available_buses) 1388 available_buses--; 1389 1390 buses = (buses & 0xff000000) 1391 | ((unsigned int)(child->primary) << 0) 1392 | ((unsigned int)(child->busn_res.start) << 8) 1393 | ((unsigned int)(child->busn_res.end) << 16); 1394 1395 /* 1396 * yenta.c forces a secondary latency timer of 176. 1397 * Copy that behaviour here. 1398 */ 1399 if (is_cardbus) { 1400 buses &= ~0xff000000; 1401 buses |= CARDBUS_LATENCY_TIMER << 24; 1402 } 1403 1404 /* We need to blast all three values with a single write */ 1405 pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses); 1406 1407 if (!is_cardbus) { 1408 child->bridge_ctl = bctl; 1409 max = pci_scan_child_bus_extend(child, available_buses); 1410 } else { 1411 1412 /* 1413 * For CardBus bridges, we leave 4 bus numbers as 1414 * cards with a PCI-to-PCI bridge can be inserted 1415 * later. 1416 */ 1417 for (i = 0; i < CARDBUS_RESERVE_BUSNR; i++) { 1418 struct pci_bus *parent = bus; 1419 if (pci_find_bus(pci_domain_nr(bus), 1420 max+i+1)) 1421 break; 1422 while (parent->parent) { 1423 if ((!pcibios_assign_all_busses()) && 1424 (parent->busn_res.end > max) && 1425 (parent->busn_res.end <= max+i)) { 1426 j = 1; 1427 } 1428 parent = parent->parent; 1429 } 1430 if (j) { 1431 1432 /* 1433 * Often, there are two CardBus 1434 * bridges -- try to leave one 1435 * valid bus number for each one. 1436 */ 1437 i /= 2; 1438 break; 1439 } 1440 } 1441 max += i; 1442 } 1443 1444 /* 1445 * Set subordinate bus number to its real value. 1446 * If fixed subordinate bus number exists from EA 1447 * capability then use it. 1448 */ 1449 if (fixed_buses) 1450 max = fixed_sub; 1451 pci_bus_update_busn_res_end(child, max); 1452 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); 1453 } 1454 1455 sprintf(child->name, 1456 (is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"), 1457 pci_domain_nr(bus), child->number); 1458 1459 /* Check that all devices are accessible */ 1460 while (bus->parent) { 1461 if ((child->busn_res.end > bus->busn_res.end) || 1462 (child->number > bus->busn_res.end) || 1463 (child->number < bus->number) || 1464 (child->busn_res.end < bus->number)) { 1465 dev_info(&dev->dev, "devices behind bridge are unusable because %pR cannot be assigned for them\n", 1466 &child->busn_res); 1467 break; 1468 } 1469 bus = bus->parent; 1470 } 1471 1472 out: 1473 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl); 1474 1475 pm_runtime_put(&dev->dev); 1476 1477 return max; 1478 } 1479 1480 /* 1481 * pci_scan_bridge() - Scan buses behind a bridge 1482 * @bus: Parent bus the bridge is on 1483 * @dev: Bridge itself 1484 * @max: Starting subordinate number of buses behind this bridge 1485 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges 1486 * that need to be reconfigured. 1487 * 1488 * If it's a bridge, configure it and scan the bus behind it. 1489 * For CardBus bridges, we don't scan behind as the devices will 1490 * be handled by the bridge driver itself. 1491 * 1492 * We need to process bridges in two passes -- first we scan those 1493 * already configured by the BIOS and after we are done with all of 1494 * them, we proceed to assigning numbers to the remaining buses in 1495 * order to avoid overlaps between old and new bus numbers. 1496 * 1497 * Return: New subordinate number covering all buses behind this bridge. 1498 */ 1499 int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) 1500 { 1501 return pci_scan_bridge_extend(bus, dev, max, 0, pass); 1502 } 1503 EXPORT_SYMBOL(pci_scan_bridge); 1504 1505 /* 1506 * Read interrupt line and base address registers. 1507 * The architecture-dependent code can tweak these, of course. 1508 */ 1509 static void pci_read_irq(struct pci_dev *dev) 1510 { 1511 unsigned char irq; 1512 1513 /* VFs are not allowed to use INTx, so skip the config reads */ 1514 if (dev->is_virtfn) { 1515 dev->pin = 0; 1516 dev->irq = 0; 1517 return; 1518 } 1519 1520 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq); 1521 dev->pin = irq; 1522 if (irq) 1523 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); 1524 dev->irq = irq; 1525 } 1526 1527 void set_pcie_port_type(struct pci_dev *pdev) 1528 { 1529 int pos; 1530 u16 reg16; 1531 u32 reg32; 1532 int type; 1533 struct pci_dev *parent; 1534 1535 pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); 1536 if (!pos) 1537 return; 1538 1539 pdev->pcie_cap = pos; 1540 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); 1541 pdev->pcie_flags_reg = reg16; 1542 pci_read_config_dword(pdev, pos + PCI_EXP_DEVCAP, &pdev->devcap); 1543 pdev->pcie_mpss = FIELD_GET(PCI_EXP_DEVCAP_PAYLOAD, pdev->devcap); 1544 1545 pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, ®32); 1546 if (reg32 & PCI_EXP_LNKCAP_DLLLARC) 1547 pdev->link_active_reporting = 1; 1548 1549 parent = pci_upstream_bridge(pdev); 1550 if (!parent) 1551 return; 1552 1553 /* 1554 * Some systems do not identify their upstream/downstream ports 1555 * correctly so detect impossible configurations here and correct 1556 * the port type accordingly. 1557 */ 1558 type = pci_pcie_type(pdev); 1559 if (type == PCI_EXP_TYPE_DOWNSTREAM) { 1560 /* 1561 * If pdev claims to be downstream port but the parent 1562 * device is also downstream port assume pdev is actually 1563 * upstream port. 1564 */ 1565 if (pcie_downstream_port(parent)) { 1566 pci_info(pdev, "claims to be downstream port but is acting as upstream port, correcting type\n"); 1567 pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE; 1568 pdev->pcie_flags_reg |= PCI_EXP_TYPE_UPSTREAM; 1569 } 1570 } else if (type == PCI_EXP_TYPE_UPSTREAM) { 1571 /* 1572 * If pdev claims to be upstream port but the parent 1573 * device is also upstream port assume pdev is actually 1574 * downstream port. 1575 */ 1576 if (pci_pcie_type(parent) == PCI_EXP_TYPE_UPSTREAM) { 1577 pci_info(pdev, "claims to be upstream port but is acting as downstream port, correcting type\n"); 1578 pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE; 1579 pdev->pcie_flags_reg |= PCI_EXP_TYPE_DOWNSTREAM; 1580 } 1581 } 1582 } 1583 1584 void set_pcie_hotplug_bridge(struct pci_dev *pdev) 1585 { 1586 u32 reg32; 1587 1588 pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, ®32); 1589 if (reg32 & PCI_EXP_SLTCAP_HPC) 1590 pdev->is_hotplug_bridge = 1; 1591 } 1592 1593 static void set_pcie_thunderbolt(struct pci_dev *dev) 1594 { 1595 u16 vsec; 1596 1597 /* Is the device part of a Thunderbolt controller? */ 1598 vsec = pci_find_vsec_capability(dev, PCI_VENDOR_ID_INTEL, PCI_VSEC_ID_INTEL_TBT); 1599 if (vsec) 1600 dev->is_thunderbolt = 1; 1601 } 1602 1603 static void set_pcie_untrusted(struct pci_dev *dev) 1604 { 1605 struct pci_dev *parent; 1606 1607 /* 1608 * If the upstream bridge is untrusted we treat this device 1609 * untrusted as well. 1610 */ 1611 parent = pci_upstream_bridge(dev); 1612 if (parent && (parent->untrusted || parent->external_facing)) 1613 dev->untrusted = true; 1614 } 1615 1616 static void pci_set_removable(struct pci_dev *dev) 1617 { 1618 struct pci_dev *parent = pci_upstream_bridge(dev); 1619 1620 /* 1621 * We (only) consider everything downstream from an external_facing 1622 * device to be removable by the user. We're mainly concerned with 1623 * consumer platforms with user accessible thunderbolt ports that are 1624 * vulnerable to DMA attacks, and we expect those ports to be marked by 1625 * the firmware as external_facing. Devices in traditional hotplug 1626 * slots can technically be removed, but the expectation is that unless 1627 * the port is marked with external_facing, such devices are less 1628 * accessible to user / may not be removed by end user, and thus not 1629 * exposed as "removable" to userspace. 1630 */ 1631 if (parent && 1632 (parent->external_facing || dev_is_removable(&parent->dev))) 1633 dev_set_removable(&dev->dev, DEVICE_REMOVABLE); 1634 } 1635 1636 /** 1637 * pci_ext_cfg_is_aliased - Is ext config space just an alias of std config? 1638 * @dev: PCI device 1639 * 1640 * PCI Express to PCI/PCI-X Bridge Specification, rev 1.0, 4.1.4 says that 1641 * when forwarding a type1 configuration request the bridge must check that 1642 * the extended register address field is zero. The bridge is not permitted 1643 * to forward the transactions and must handle it as an Unsupported Request. 1644 * Some bridges do not follow this rule and simply drop the extended register 1645 * bits, resulting in the standard config space being aliased, every 256 1646 * bytes across the entire configuration space. Test for this condition by 1647 * comparing the first dword of each potential alias to the vendor/device ID. 1648 * Known offenders: 1649 * ASM1083/1085 PCIe-to-PCI Reversible Bridge (1b21:1080, rev 01 & 03) 1650 * AMD/ATI SBx00 PCI to PCI Bridge (1002:4384, rev 40) 1651 */ 1652 static bool pci_ext_cfg_is_aliased(struct pci_dev *dev) 1653 { 1654 #ifdef CONFIG_PCI_QUIRKS 1655 int pos, ret; 1656 u32 header, tmp; 1657 1658 pci_read_config_dword(dev, PCI_VENDOR_ID, &header); 1659 1660 for (pos = PCI_CFG_SPACE_SIZE; 1661 pos < PCI_CFG_SPACE_EXP_SIZE; pos += PCI_CFG_SPACE_SIZE) { 1662 ret = pci_read_config_dword(dev, pos, &tmp); 1663 if ((ret != PCIBIOS_SUCCESSFUL) || (header != tmp)) 1664 return false; 1665 } 1666 1667 return true; 1668 #else 1669 return false; 1670 #endif 1671 } 1672 1673 /** 1674 * pci_cfg_space_size_ext - Get the configuration space size of the PCI device 1675 * @dev: PCI device 1676 * 1677 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices 1678 * have 4096 bytes. Even if the device is capable, that doesn't mean we can 1679 * access it. Maybe we don't have a way to generate extended config space 1680 * accesses, or the device is behind a reverse Express bridge. So we try 1681 * reading the dword at 0x100 which must either be 0 or a valid extended 1682 * capability header. 1683 */ 1684 static int pci_cfg_space_size_ext(struct pci_dev *dev) 1685 { 1686 u32 status; 1687 int pos = PCI_CFG_SPACE_SIZE; 1688 1689 if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL) 1690 return PCI_CFG_SPACE_SIZE; 1691 if (PCI_POSSIBLE_ERROR(status) || pci_ext_cfg_is_aliased(dev)) 1692 return PCI_CFG_SPACE_SIZE; 1693 1694 return PCI_CFG_SPACE_EXP_SIZE; 1695 } 1696 1697 int pci_cfg_space_size(struct pci_dev *dev) 1698 { 1699 int pos; 1700 u32 status; 1701 u16 class; 1702 1703 #ifdef CONFIG_PCI_IOV 1704 /* 1705 * Per the SR-IOV specification (rev 1.1, sec 3.5), VFs are required to 1706 * implement a PCIe capability and therefore must implement extended 1707 * config space. We can skip the NO_EXTCFG test below and the 1708 * reachability/aliasing test in pci_cfg_space_size_ext() by virtue of 1709 * the fact that the SR-IOV capability on the PF resides in extended 1710 * config space and must be accessible and non-aliased to have enabled 1711 * support for this VF. This is a micro performance optimization for 1712 * systems supporting many VFs. 1713 */ 1714 if (dev->is_virtfn) 1715 return PCI_CFG_SPACE_EXP_SIZE; 1716 #endif 1717 1718 if (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG) 1719 return PCI_CFG_SPACE_SIZE; 1720 1721 class = dev->class >> 8; 1722 if (class == PCI_CLASS_BRIDGE_HOST) 1723 return pci_cfg_space_size_ext(dev); 1724 1725 if (pci_is_pcie(dev)) 1726 return pci_cfg_space_size_ext(dev); 1727 1728 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); 1729 if (!pos) 1730 return PCI_CFG_SPACE_SIZE; 1731 1732 pci_read_config_dword(dev, pos + PCI_X_STATUS, &status); 1733 if (status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ)) 1734 return pci_cfg_space_size_ext(dev); 1735 1736 return PCI_CFG_SPACE_SIZE; 1737 } 1738 1739 static u32 pci_class(struct pci_dev *dev) 1740 { 1741 u32 class; 1742 1743 #ifdef CONFIG_PCI_IOV 1744 if (dev->is_virtfn) 1745 return dev->physfn->sriov->class; 1746 #endif 1747 pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); 1748 return class; 1749 } 1750 1751 static void pci_subsystem_ids(struct pci_dev *dev, u16 *vendor, u16 *device) 1752 { 1753 #ifdef CONFIG_PCI_IOV 1754 if (dev->is_virtfn) { 1755 *vendor = dev->physfn->sriov->subsystem_vendor; 1756 *device = dev->physfn->sriov->subsystem_device; 1757 return; 1758 } 1759 #endif 1760 pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, vendor); 1761 pci_read_config_word(dev, PCI_SUBSYSTEM_ID, device); 1762 } 1763 1764 static u8 pci_hdr_type(struct pci_dev *dev) 1765 { 1766 u8 hdr_type; 1767 1768 #ifdef CONFIG_PCI_IOV 1769 if (dev->is_virtfn) 1770 return dev->physfn->sriov->hdr_type; 1771 #endif 1772 pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type); 1773 return hdr_type; 1774 } 1775 1776 #define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED) 1777 1778 /** 1779 * pci_intx_mask_broken - Test PCI_COMMAND_INTX_DISABLE writability 1780 * @dev: PCI device 1781 * 1782 * Test whether PCI_COMMAND_INTX_DISABLE is writable for @dev. Check this 1783 * at enumeration-time to avoid modifying PCI_COMMAND at run-time. 1784 */ 1785 static int pci_intx_mask_broken(struct pci_dev *dev) 1786 { 1787 u16 orig, toggle, new; 1788 1789 pci_read_config_word(dev, PCI_COMMAND, &orig); 1790 toggle = orig ^ PCI_COMMAND_INTX_DISABLE; 1791 pci_write_config_word(dev, PCI_COMMAND, toggle); 1792 pci_read_config_word(dev, PCI_COMMAND, &new); 1793 1794 pci_write_config_word(dev, PCI_COMMAND, orig); 1795 1796 /* 1797 * PCI_COMMAND_INTX_DISABLE was reserved and read-only prior to PCI 1798 * r2.3, so strictly speaking, a device is not *broken* if it's not 1799 * writable. But we'll live with the misnomer for now. 1800 */ 1801 if (new != toggle) 1802 return 1; 1803 return 0; 1804 } 1805 1806 static void early_dump_pci_device(struct pci_dev *pdev) 1807 { 1808 u32 value[256 / 4]; 1809 int i; 1810 1811 pci_info(pdev, "config space:\n"); 1812 1813 for (i = 0; i < 256; i += 4) 1814 pci_read_config_dword(pdev, i, &value[i / 4]); 1815 1816 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, 1817 value, 256, false); 1818 } 1819 1820 /** 1821 * pci_setup_device - Fill in class and map information of a device 1822 * @dev: the device structure to fill 1823 * 1824 * Initialize the device structure with information about the device's 1825 * vendor,class,memory and IO-space addresses, IRQ lines etc. 1826 * Called at initialisation of the PCI subsystem and by CardBus services. 1827 * Returns 0 on success and negative if unknown type of device (not normal, 1828 * bridge or CardBus). 1829 */ 1830 int pci_setup_device(struct pci_dev *dev) 1831 { 1832 u32 class; 1833 u16 cmd; 1834 u8 hdr_type; 1835 int err, pos = 0; 1836 struct pci_bus_region region; 1837 struct resource *res; 1838 1839 hdr_type = pci_hdr_type(dev); 1840 1841 dev->sysdata = dev->bus->sysdata; 1842 dev->dev.parent = dev->bus->bridge; 1843 dev->dev.bus = &pci_bus_type; 1844 dev->hdr_type = hdr_type & 0x7f; 1845 dev->multifunction = !!(hdr_type & 0x80); 1846 dev->error_state = pci_channel_io_normal; 1847 set_pcie_port_type(dev); 1848 1849 err = pci_set_of_node(dev); 1850 if (err) 1851 return err; 1852 pci_set_acpi_fwnode(dev); 1853 1854 pci_dev_assign_slot(dev); 1855 1856 /* 1857 * Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer) 1858 * set this higher, assuming the system even supports it. 1859 */ 1860 dev->dma_mask = 0xffffffff; 1861 1862 dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus), 1863 dev->bus->number, PCI_SLOT(dev->devfn), 1864 PCI_FUNC(dev->devfn)); 1865 1866 class = pci_class(dev); 1867 1868 dev->revision = class & 0xff; 1869 dev->class = class >> 8; /* upper 3 bytes */ 1870 1871 if (pci_early_dump) 1872 early_dump_pci_device(dev); 1873 1874 /* Need to have dev->class ready */ 1875 dev->cfg_size = pci_cfg_space_size(dev); 1876 1877 /* Need to have dev->cfg_size ready */ 1878 set_pcie_thunderbolt(dev); 1879 1880 set_pcie_untrusted(dev); 1881 1882 /* "Unknown power state" */ 1883 dev->current_state = PCI_UNKNOWN; 1884 1885 /* Early fixups, before probing the BARs */ 1886 pci_fixup_device(pci_fixup_early, dev); 1887 1888 pci_set_removable(dev); 1889 1890 pci_info(dev, "[%04x:%04x] type %02x class %#08x\n", 1891 dev->vendor, dev->device, dev->hdr_type, dev->class); 1892 1893 /* Device class may be changed after fixup */ 1894 class = dev->class >> 8; 1895 1896 if (dev->non_compliant_bars && !dev->mmio_always_on) { 1897 pci_read_config_word(dev, PCI_COMMAND, &cmd); 1898 if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { 1899 pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n"); 1900 cmd &= ~PCI_COMMAND_IO; 1901 cmd &= ~PCI_COMMAND_MEMORY; 1902 pci_write_config_word(dev, PCI_COMMAND, cmd); 1903 } 1904 } 1905 1906 dev->broken_intx_masking = pci_intx_mask_broken(dev); 1907 1908 switch (dev->hdr_type) { /* header type */ 1909 case PCI_HEADER_TYPE_NORMAL: /* standard header */ 1910 if (class == PCI_CLASS_BRIDGE_PCI) 1911 goto bad; 1912 pci_read_irq(dev); 1913 pci_read_bases(dev, 6, PCI_ROM_ADDRESS); 1914 1915 pci_subsystem_ids(dev, &dev->subsystem_vendor, &dev->subsystem_device); 1916 1917 /* 1918 * Do the ugly legacy mode stuff here rather than broken chip 1919 * quirk code. Legacy mode ATA controllers have fixed 1920 * addresses. These are not always echoed in BAR0-3, and 1921 * BAR0-3 in a few cases contain junk! 1922 */ 1923 if (class == PCI_CLASS_STORAGE_IDE) { 1924 u8 progif; 1925 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); 1926 if ((progif & 1) == 0) { 1927 region.start = 0x1F0; 1928 region.end = 0x1F7; 1929 res = &dev->resource[0]; 1930 res->flags = LEGACY_IO_RESOURCE; 1931 pcibios_bus_to_resource(dev->bus, res, ®ion); 1932 pci_info(dev, "legacy IDE quirk: reg 0x10: %pR\n", 1933 res); 1934 region.start = 0x3F6; 1935 region.end = 0x3F6; 1936 res = &dev->resource[1]; 1937 res->flags = LEGACY_IO_RESOURCE; 1938 pcibios_bus_to_resource(dev->bus, res, ®ion); 1939 pci_info(dev, "legacy IDE quirk: reg 0x14: %pR\n", 1940 res); 1941 } 1942 if ((progif & 4) == 0) { 1943 region.start = 0x170; 1944 region.end = 0x177; 1945 res = &dev->resource[2]; 1946 res->flags = LEGACY_IO_RESOURCE; 1947 pcibios_bus_to_resource(dev->bus, res, ®ion); 1948 pci_info(dev, "legacy IDE quirk: reg 0x18: %pR\n", 1949 res); 1950 region.start = 0x376; 1951 region.end = 0x376; 1952 res = &dev->resource[3]; 1953 res->flags = LEGACY_IO_RESOURCE; 1954 pcibios_bus_to_resource(dev->bus, res, ®ion); 1955 pci_info(dev, "legacy IDE quirk: reg 0x1c: %pR\n", 1956 res); 1957 } 1958 } 1959 break; 1960 1961 case PCI_HEADER_TYPE_BRIDGE: /* bridge header */ 1962 /* 1963 * The PCI-to-PCI bridge spec requires that subtractive 1964 * decoding (i.e. transparent) bridge must have programming 1965 * interface code of 0x01. 1966 */ 1967 pci_read_irq(dev); 1968 dev->transparent = ((dev->class & 0xff) == 1); 1969 pci_read_bases(dev, 2, PCI_ROM_ADDRESS1); 1970 pci_read_bridge_windows(dev); 1971 set_pcie_hotplug_bridge(dev); 1972 pos = pci_find_capability(dev, PCI_CAP_ID_SSVID); 1973 if (pos) { 1974 pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor); 1975 pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device); 1976 } 1977 break; 1978 1979 case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */ 1980 if (class != PCI_CLASS_BRIDGE_CARDBUS) 1981 goto bad; 1982 pci_read_irq(dev); 1983 pci_read_bases(dev, 1, 0); 1984 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor); 1985 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device); 1986 break; 1987 1988 default: /* unknown header */ 1989 pci_err(dev, "unknown header type %02x, ignoring device\n", 1990 dev->hdr_type); 1991 pci_release_of_node(dev); 1992 return -EIO; 1993 1994 bad: 1995 pci_err(dev, "ignoring class %#08x (doesn't match header type %02x)\n", 1996 dev->class, dev->hdr_type); 1997 dev->class = PCI_CLASS_NOT_DEFINED << 8; 1998 } 1999 2000 /* We found a fine healthy device, go go go... */ 2001 return 0; 2002 } 2003 2004 static void pci_configure_mps(struct pci_dev *dev) 2005 { 2006 struct pci_dev *bridge = pci_upstream_bridge(dev); 2007 int mps, mpss, p_mps, rc; 2008 2009 if (!pci_is_pcie(dev)) 2010 return; 2011 2012 /* MPS and MRRS fields are of type 'RsvdP' for VFs, short-circuit out */ 2013 if (dev->is_virtfn) 2014 return; 2015 2016 /* 2017 * For Root Complex Integrated Endpoints, program the maximum 2018 * supported value unless limited by the PCIE_BUS_PEER2PEER case. 2019 */ 2020 if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) { 2021 if (pcie_bus_config == PCIE_BUS_PEER2PEER) 2022 mps = 128; 2023 else 2024 mps = 128 << dev->pcie_mpss; 2025 rc = pcie_set_mps(dev, mps); 2026 if (rc) { 2027 pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n", 2028 mps); 2029 } 2030 return; 2031 } 2032 2033 if (!bridge || !pci_is_pcie(bridge)) 2034 return; 2035 2036 mps = pcie_get_mps(dev); 2037 p_mps = pcie_get_mps(bridge); 2038 2039 if (mps == p_mps) 2040 return; 2041 2042 if (pcie_bus_config == PCIE_BUS_TUNE_OFF) { 2043 pci_warn(dev, "Max Payload Size %d, but upstream %s set to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n", 2044 mps, pci_name(bridge), p_mps); 2045 return; 2046 } 2047 2048 /* 2049 * Fancier MPS configuration is done later by 2050 * pcie_bus_configure_settings() 2051 */ 2052 if (pcie_bus_config != PCIE_BUS_DEFAULT) 2053 return; 2054 2055 mpss = 128 << dev->pcie_mpss; 2056 if (mpss < p_mps && pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT) { 2057 pcie_set_mps(bridge, mpss); 2058 pci_info(dev, "Upstream bridge's Max Payload Size set to %d (was %d, max %d)\n", 2059 mpss, p_mps, 128 << bridge->pcie_mpss); 2060 p_mps = pcie_get_mps(bridge); 2061 } 2062 2063 rc = pcie_set_mps(dev, p_mps); 2064 if (rc) { 2065 pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n", 2066 p_mps); 2067 return; 2068 } 2069 2070 pci_info(dev, "Max Payload Size set to %d (was %d, max %d)\n", 2071 p_mps, mps, mpss); 2072 } 2073 2074 int pci_configure_extended_tags(struct pci_dev *dev, void *ign) 2075 { 2076 struct pci_host_bridge *host; 2077 u32 cap; 2078 u16 ctl; 2079 int ret; 2080 2081 if (!pci_is_pcie(dev)) 2082 return 0; 2083 2084 ret = pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap); 2085 if (ret) 2086 return 0; 2087 2088 if (!(cap & PCI_EXP_DEVCAP_EXT_TAG)) 2089 return 0; 2090 2091 ret = pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &ctl); 2092 if (ret) 2093 return 0; 2094 2095 host = pci_find_host_bridge(dev->bus); 2096 if (!host) 2097 return 0; 2098 2099 /* 2100 * If some device in the hierarchy doesn't handle Extended Tags 2101 * correctly, make sure they're disabled. 2102 */ 2103 if (host->no_ext_tags) { 2104 if (ctl & PCI_EXP_DEVCTL_EXT_TAG) { 2105 pci_info(dev, "disabling Extended Tags\n"); 2106 pcie_capability_clear_word(dev, PCI_EXP_DEVCTL, 2107 PCI_EXP_DEVCTL_EXT_TAG); 2108 } 2109 return 0; 2110 } 2111 2112 if (!(ctl & PCI_EXP_DEVCTL_EXT_TAG)) { 2113 pci_info(dev, "enabling Extended Tags\n"); 2114 pcie_capability_set_word(dev, PCI_EXP_DEVCTL, 2115 PCI_EXP_DEVCTL_EXT_TAG); 2116 } 2117 return 0; 2118 } 2119 2120 /** 2121 * pcie_relaxed_ordering_enabled - Probe for PCIe relaxed ordering enable 2122 * @dev: PCI device to query 2123 * 2124 * Returns true if the device has enabled relaxed ordering attribute. 2125 */ 2126 bool pcie_relaxed_ordering_enabled(struct pci_dev *dev) 2127 { 2128 u16 v; 2129 2130 pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &v); 2131 2132 return !!(v & PCI_EXP_DEVCTL_RELAX_EN); 2133 } 2134 EXPORT_SYMBOL(pcie_relaxed_ordering_enabled); 2135 2136 static void pci_configure_relaxed_ordering(struct pci_dev *dev) 2137 { 2138 struct pci_dev *root; 2139 2140 /* PCI_EXP_DEVCTL_RELAX_EN is RsvdP in VFs */ 2141 if (dev->is_virtfn) 2142 return; 2143 2144 if (!pcie_relaxed_ordering_enabled(dev)) 2145 return; 2146 2147 /* 2148 * For now, we only deal with Relaxed Ordering issues with Root 2149 * Ports. Peer-to-Peer DMA is another can of worms. 2150 */ 2151 root = pcie_find_root_port(dev); 2152 if (!root) 2153 return; 2154 2155 if (root->dev_flags & PCI_DEV_FLAGS_NO_RELAXED_ORDERING) { 2156 pcie_capability_clear_word(dev, PCI_EXP_DEVCTL, 2157 PCI_EXP_DEVCTL_RELAX_EN); 2158 pci_info(dev, "Relaxed Ordering disabled because the Root Port didn't support it\n"); 2159 } 2160 } 2161 2162 static void pci_configure_ltr(struct pci_dev *dev) 2163 { 2164 #ifdef CONFIG_PCIEASPM 2165 struct pci_host_bridge *host = pci_find_host_bridge(dev->bus); 2166 struct pci_dev *bridge; 2167 u32 cap, ctl; 2168 2169 if (!pci_is_pcie(dev)) 2170 return; 2171 2172 /* Read L1 PM substate capabilities */ 2173 dev->l1ss = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_L1SS); 2174 2175 pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap); 2176 if (!(cap & PCI_EXP_DEVCAP2_LTR)) 2177 return; 2178 2179 pcie_capability_read_dword(dev, PCI_EXP_DEVCTL2, &ctl); 2180 if (ctl & PCI_EXP_DEVCTL2_LTR_EN) { 2181 if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) { 2182 dev->ltr_path = 1; 2183 return; 2184 } 2185 2186 bridge = pci_upstream_bridge(dev); 2187 if (bridge && bridge->ltr_path) 2188 dev->ltr_path = 1; 2189 2190 return; 2191 } 2192 2193 if (!host->native_ltr) 2194 return; 2195 2196 /* 2197 * Software must not enable LTR in an Endpoint unless the Root 2198 * Complex and all intermediate Switches indicate support for LTR. 2199 * PCIe r4.0, sec 6.18. 2200 */ 2201 if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) { 2202 pcie_capability_set_word(dev, PCI_EXP_DEVCTL2, 2203 PCI_EXP_DEVCTL2_LTR_EN); 2204 dev->ltr_path = 1; 2205 return; 2206 } 2207 2208 /* 2209 * If we're configuring a hot-added device, LTR was likely 2210 * disabled in the upstream bridge, so re-enable it before enabling 2211 * it in the new device. 2212 */ 2213 bridge = pci_upstream_bridge(dev); 2214 if (bridge && bridge->ltr_path) { 2215 pci_bridge_reconfigure_ltr(dev); 2216 pcie_capability_set_word(dev, PCI_EXP_DEVCTL2, 2217 PCI_EXP_DEVCTL2_LTR_EN); 2218 dev->ltr_path = 1; 2219 } 2220 #endif 2221 } 2222 2223 static void pci_configure_eetlp_prefix(struct pci_dev *dev) 2224 { 2225 #ifdef CONFIG_PCI_PASID 2226 struct pci_dev *bridge; 2227 int pcie_type; 2228 u32 cap; 2229 2230 if (!pci_is_pcie(dev)) 2231 return; 2232 2233 pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap); 2234 if (!(cap & PCI_EXP_DEVCAP2_EE_PREFIX)) 2235 return; 2236 2237 pcie_type = pci_pcie_type(dev); 2238 if (pcie_type == PCI_EXP_TYPE_ROOT_PORT || 2239 pcie_type == PCI_EXP_TYPE_RC_END) 2240 dev->eetlp_prefix_path = 1; 2241 else { 2242 bridge = pci_upstream_bridge(dev); 2243 if (bridge && bridge->eetlp_prefix_path) 2244 dev->eetlp_prefix_path = 1; 2245 } 2246 #endif 2247 } 2248 2249 static void pci_configure_serr(struct pci_dev *dev) 2250 { 2251 u16 control; 2252 2253 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { 2254 2255 /* 2256 * A bridge will not forward ERR_ messages coming from an 2257 * endpoint unless SERR# forwarding is enabled. 2258 */ 2259 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &control); 2260 if (!(control & PCI_BRIDGE_CTL_SERR)) { 2261 control |= PCI_BRIDGE_CTL_SERR; 2262 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, control); 2263 } 2264 } 2265 } 2266 2267 static void pci_configure_device(struct pci_dev *dev) 2268 { 2269 pci_configure_mps(dev); 2270 pci_configure_extended_tags(dev, NULL); 2271 pci_configure_relaxed_ordering(dev); 2272 pci_configure_ltr(dev); 2273 pci_configure_eetlp_prefix(dev); 2274 pci_configure_serr(dev); 2275 2276 pci_acpi_program_hp_params(dev); 2277 } 2278 2279 static void pci_release_capabilities(struct pci_dev *dev) 2280 { 2281 pci_aer_exit(dev); 2282 pci_rcec_exit(dev); 2283 pci_iov_release(dev); 2284 pci_free_cap_save_buffers(dev); 2285 } 2286 2287 /** 2288 * pci_release_dev - Free a PCI device structure when all users of it are 2289 * finished 2290 * @dev: device that's been disconnected 2291 * 2292 * Will be called only by the device core when all users of this PCI device are 2293 * done. 2294 */ 2295 static void pci_release_dev(struct device *dev) 2296 { 2297 struct pci_dev *pci_dev; 2298 2299 pci_dev = to_pci_dev(dev); 2300 pci_release_capabilities(pci_dev); 2301 pci_release_of_node(pci_dev); 2302 pcibios_release_device(pci_dev); 2303 pci_bus_put(pci_dev->bus); 2304 kfree(pci_dev->driver_override); 2305 bitmap_free(pci_dev->dma_alias_mask); 2306 dev_dbg(dev, "device released\n"); 2307 kfree(pci_dev); 2308 } 2309 2310 struct pci_dev *pci_alloc_dev(struct pci_bus *bus) 2311 { 2312 struct pci_dev *dev; 2313 2314 dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL); 2315 if (!dev) 2316 return NULL; 2317 2318 INIT_LIST_HEAD(&dev->bus_list); 2319 dev->dev.type = &pci_dev_type; 2320 dev->bus = pci_bus_get(bus); 2321 dev->driver_exclusive_resource = (struct resource) { 2322 .name = "PCI Exclusive", 2323 .start = 0, 2324 .end = -1, 2325 }; 2326 2327 spin_lock_init(&dev->pcie_cap_lock); 2328 #ifdef CONFIG_PCI_MSI 2329 raw_spin_lock_init(&dev->msi_lock); 2330 #endif 2331 return dev; 2332 } 2333 EXPORT_SYMBOL(pci_alloc_dev); 2334 2335 static bool pci_bus_crs_vendor_id(u32 l) 2336 { 2337 return (l & 0xffff) == PCI_VENDOR_ID_PCI_SIG; 2338 } 2339 2340 static bool pci_bus_wait_crs(struct pci_bus *bus, int devfn, u32 *l, 2341 int timeout) 2342 { 2343 int delay = 1; 2344 2345 if (!pci_bus_crs_vendor_id(*l)) 2346 return true; /* not a CRS completion */ 2347 2348 if (!timeout) 2349 return false; /* CRS, but caller doesn't want to wait */ 2350 2351 /* 2352 * We got the reserved Vendor ID that indicates a completion with 2353 * Configuration Request Retry Status (CRS). Retry until we get a 2354 * valid Vendor ID or we time out. 2355 */ 2356 while (pci_bus_crs_vendor_id(*l)) { 2357 if (delay > timeout) { 2358 pr_warn("pci %04x:%02x:%02x.%d: not ready after %dms; giving up\n", 2359 pci_domain_nr(bus), bus->number, 2360 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1); 2361 2362 return false; 2363 } 2364 if (delay >= 1000) 2365 pr_info("pci %04x:%02x:%02x.%d: not ready after %dms; waiting\n", 2366 pci_domain_nr(bus), bus->number, 2367 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1); 2368 2369 msleep(delay); 2370 delay *= 2; 2371 2372 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) 2373 return false; 2374 } 2375 2376 if (delay >= 1000) 2377 pr_info("pci %04x:%02x:%02x.%d: ready after %dms\n", 2378 pci_domain_nr(bus), bus->number, 2379 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1); 2380 2381 return true; 2382 } 2383 2384 bool pci_bus_generic_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, 2385 int timeout) 2386 { 2387 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) 2388 return false; 2389 2390 /* Some broken boards return 0 or ~0 (PCI_ERROR_RESPONSE) if a slot is empty: */ 2391 if (PCI_POSSIBLE_ERROR(*l) || *l == 0x00000000 || 2392 *l == 0x0000ffff || *l == 0xffff0000) 2393 return false; 2394 2395 if (pci_bus_crs_vendor_id(*l)) 2396 return pci_bus_wait_crs(bus, devfn, l, timeout); 2397 2398 return true; 2399 } 2400 2401 bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, 2402 int timeout) 2403 { 2404 #ifdef CONFIG_PCI_QUIRKS 2405 struct pci_dev *bridge = bus->self; 2406 2407 /* 2408 * Certain IDT switches have an issue where they improperly trigger 2409 * ACS Source Validation errors on completions for config reads. 2410 */ 2411 if (bridge && bridge->vendor == PCI_VENDOR_ID_IDT && 2412 bridge->device == 0x80b5) 2413 return pci_idt_bus_quirk(bus, devfn, l, timeout); 2414 #endif 2415 2416 return pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout); 2417 } 2418 EXPORT_SYMBOL(pci_bus_read_dev_vendor_id); 2419 2420 /* 2421 * Read the config data for a PCI device, sanity-check it, 2422 * and fill in the dev structure. 2423 */ 2424 static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn) 2425 { 2426 struct pci_dev *dev; 2427 u32 l; 2428 2429 if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000)) 2430 return NULL; 2431 2432 dev = pci_alloc_dev(bus); 2433 if (!dev) 2434 return NULL; 2435 2436 dev->devfn = devfn; 2437 dev->vendor = l & 0xffff; 2438 dev->device = (l >> 16) & 0xffff; 2439 2440 if (pci_setup_device(dev)) { 2441 pci_bus_put(dev->bus); 2442 kfree(dev); 2443 return NULL; 2444 } 2445 2446 return dev; 2447 } 2448 2449 void pcie_report_downtraining(struct pci_dev *dev) 2450 { 2451 if (!pci_is_pcie(dev)) 2452 return; 2453 2454 /* Look from the device up to avoid downstream ports with no devices */ 2455 if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT) && 2456 (pci_pcie_type(dev) != PCI_EXP_TYPE_LEG_END) && 2457 (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM)) 2458 return; 2459 2460 /* Multi-function PCIe devices share the same link/status */ 2461 if (PCI_FUNC(dev->devfn) != 0 || dev->is_virtfn) 2462 return; 2463 2464 /* Print link status only if the device is constrained by the fabric */ 2465 __pcie_print_link_status(dev, false); 2466 } 2467 2468 static void pci_init_capabilities(struct pci_dev *dev) 2469 { 2470 pci_ea_init(dev); /* Enhanced Allocation */ 2471 pci_msi_init(dev); /* Disable MSI */ 2472 pci_msix_init(dev); /* Disable MSI-X */ 2473 2474 /* Buffers for saving PCIe and PCI-X capabilities */ 2475 pci_allocate_cap_save_buffers(dev); 2476 2477 pci_pm_init(dev); /* Power Management */ 2478 pci_vpd_init(dev); /* Vital Product Data */ 2479 pci_configure_ari(dev); /* Alternative Routing-ID Forwarding */ 2480 pci_iov_init(dev); /* Single Root I/O Virtualization */ 2481 pci_ats_init(dev); /* Address Translation Services */ 2482 pci_pri_init(dev); /* Page Request Interface */ 2483 pci_pasid_init(dev); /* Process Address Space ID */ 2484 pci_acs_init(dev); /* Access Control Services */ 2485 pci_ptm_init(dev); /* Precision Time Measurement */ 2486 pci_aer_init(dev); /* Advanced Error Reporting */ 2487 pci_dpc_init(dev); /* Downstream Port Containment */ 2488 pci_rcec_init(dev); /* Root Complex Event Collector */ 2489 pci_doe_init(dev); /* Data Object Exchange */ 2490 2491 pcie_report_downtraining(dev); 2492 pci_init_reset_methods(dev); 2493 } 2494 2495 /* 2496 * This is the equivalent of pci_host_bridge_msi_domain() that acts on 2497 * devices. Firmware interfaces that can select the MSI domain on a 2498 * per-device basis should be called from here. 2499 */ 2500 static struct irq_domain *pci_dev_msi_domain(struct pci_dev *dev) 2501 { 2502 struct irq_domain *d; 2503 2504 /* 2505 * If a domain has been set through the pcibios_device_add() 2506 * callback, then this is the one (platform code knows best). 2507 */ 2508 d = dev_get_msi_domain(&dev->dev); 2509 if (d) 2510 return d; 2511 2512 /* 2513 * Let's see if we have a firmware interface able to provide 2514 * the domain. 2515 */ 2516 d = pci_msi_get_device_domain(dev); 2517 if (d) 2518 return d; 2519 2520 return NULL; 2521 } 2522 2523 static void pci_set_msi_domain(struct pci_dev *dev) 2524 { 2525 struct irq_domain *d; 2526 2527 /* 2528 * If the platform or firmware interfaces cannot supply a 2529 * device-specific MSI domain, then inherit the default domain 2530 * from the host bridge itself. 2531 */ 2532 d = pci_dev_msi_domain(dev); 2533 if (!d) 2534 d = dev_get_msi_domain(&dev->bus->dev); 2535 2536 dev_set_msi_domain(&dev->dev, d); 2537 } 2538 2539 void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) 2540 { 2541 int ret; 2542 2543 pci_configure_device(dev); 2544 2545 device_initialize(&dev->dev); 2546 dev->dev.release = pci_release_dev; 2547 2548 set_dev_node(&dev->dev, pcibus_to_node(bus)); 2549 dev->dev.dma_mask = &dev->dma_mask; 2550 dev->dev.dma_parms = &dev->dma_parms; 2551 dev->dev.coherent_dma_mask = 0xffffffffull; 2552 2553 dma_set_max_seg_size(&dev->dev, 65536); 2554 dma_set_seg_boundary(&dev->dev, 0xffffffff); 2555 2556 pcie_failed_link_retrain(dev); 2557 2558 /* Fix up broken headers */ 2559 pci_fixup_device(pci_fixup_header, dev); 2560 2561 pci_reassigndev_resource_alignment(dev); 2562 2563 dev->state_saved = false; 2564 2565 pci_init_capabilities(dev); 2566 2567 /* 2568 * Add the device to our list of discovered devices 2569 * and the bus list for fixup functions, etc. 2570 */ 2571 down_write(&pci_bus_sem); 2572 list_add_tail(&dev->bus_list, &bus->devices); 2573 up_write(&pci_bus_sem); 2574 2575 ret = pcibios_device_add(dev); 2576 WARN_ON(ret < 0); 2577 2578 /* Set up MSI IRQ domain */ 2579 pci_set_msi_domain(dev); 2580 2581 /* Notifier could use PCI capabilities */ 2582 dev->match_driver = false; 2583 ret = device_add(&dev->dev); 2584 WARN_ON(ret < 0); 2585 } 2586 2587 struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn) 2588 { 2589 struct pci_dev *dev; 2590 2591 dev = pci_get_slot(bus, devfn); 2592 if (dev) { 2593 pci_dev_put(dev); 2594 return dev; 2595 } 2596 2597 dev = pci_scan_device(bus, devfn); 2598 if (!dev) 2599 return NULL; 2600 2601 pci_device_add(dev, bus); 2602 2603 return dev; 2604 } 2605 EXPORT_SYMBOL(pci_scan_single_device); 2606 2607 static int next_ari_fn(struct pci_bus *bus, struct pci_dev *dev, int fn) 2608 { 2609 int pos; 2610 u16 cap = 0; 2611 unsigned int next_fn; 2612 2613 if (!dev) 2614 return -ENODEV; 2615 2616 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI); 2617 if (!pos) 2618 return -ENODEV; 2619 2620 pci_read_config_word(dev, pos + PCI_ARI_CAP, &cap); 2621 next_fn = PCI_ARI_CAP_NFN(cap); 2622 if (next_fn <= fn) 2623 return -ENODEV; /* protect against malformed list */ 2624 2625 return next_fn; 2626 } 2627 2628 static int next_fn(struct pci_bus *bus, struct pci_dev *dev, int fn) 2629 { 2630 if (pci_ari_enabled(bus)) 2631 return next_ari_fn(bus, dev, fn); 2632 2633 if (fn >= 7) 2634 return -ENODEV; 2635 /* only multifunction devices may have more functions */ 2636 if (dev && !dev->multifunction) 2637 return -ENODEV; 2638 2639 return fn + 1; 2640 } 2641 2642 static int only_one_child(struct pci_bus *bus) 2643 { 2644 struct pci_dev *bridge = bus->self; 2645 2646 /* 2647 * Systems with unusual topologies set PCI_SCAN_ALL_PCIE_DEVS so 2648 * we scan for all possible devices, not just Device 0. 2649 */ 2650 if (pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS)) 2651 return 0; 2652 2653 /* 2654 * A PCIe Downstream Port normally leads to a Link with only Device 2655 * 0 on it (PCIe spec r3.1, sec 7.3.1). As an optimization, scan 2656 * only for Device 0 in that situation. 2657 */ 2658 if (bridge && pci_is_pcie(bridge) && pcie_downstream_port(bridge)) 2659 return 1; 2660 2661 return 0; 2662 } 2663 2664 /** 2665 * pci_scan_slot - Scan a PCI slot on a bus for devices 2666 * @bus: PCI bus to scan 2667 * @devfn: slot number to scan (must have zero function) 2668 * 2669 * Scan a PCI slot on the specified PCI bus for devices, adding 2670 * discovered devices to the @bus->devices list. New devices 2671 * will not have is_added set. 2672 * 2673 * Returns the number of new devices found. 2674 */ 2675 int pci_scan_slot(struct pci_bus *bus, int devfn) 2676 { 2677 struct pci_dev *dev; 2678 int fn = 0, nr = 0; 2679 2680 if (only_one_child(bus) && (devfn > 0)) 2681 return 0; /* Already scanned the entire slot */ 2682 2683 do { 2684 dev = pci_scan_single_device(bus, devfn + fn); 2685 if (dev) { 2686 if (!pci_dev_is_added(dev)) 2687 nr++; 2688 if (fn > 0) 2689 dev->multifunction = 1; 2690 } else if (fn == 0) { 2691 /* 2692 * Function 0 is required unless we are running on 2693 * a hypervisor that passes through individual PCI 2694 * functions. 2695 */ 2696 if (!hypervisor_isolated_pci_functions()) 2697 break; 2698 } 2699 fn = next_fn(bus, dev, fn); 2700 } while (fn >= 0); 2701 2702 /* Only one slot has PCIe device */ 2703 if (bus->self && nr) 2704 pcie_aspm_init_link_state(bus->self); 2705 2706 return nr; 2707 } 2708 EXPORT_SYMBOL(pci_scan_slot); 2709 2710 static int pcie_find_smpss(struct pci_dev *dev, void *data) 2711 { 2712 u8 *smpss = data; 2713 2714 if (!pci_is_pcie(dev)) 2715 return 0; 2716 2717 /* 2718 * We don't have a way to change MPS settings on devices that have 2719 * drivers attached. A hot-added device might support only the minimum 2720 * MPS setting (MPS=128). Therefore, if the fabric contains a bridge 2721 * where devices may be hot-added, we limit the fabric MPS to 128 so 2722 * hot-added devices will work correctly. 2723 * 2724 * However, if we hot-add a device to a slot directly below a Root 2725 * Port, it's impossible for there to be other existing devices below 2726 * the port. We don't limit the MPS in this case because we can 2727 * reconfigure MPS on both the Root Port and the hot-added device, 2728 * and there are no other devices involved. 2729 * 2730 * Note that this PCIE_BUS_SAFE path assumes no peer-to-peer DMA. 2731 */ 2732 if (dev->is_hotplug_bridge && 2733 pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) 2734 *smpss = 0; 2735 2736 if (*smpss > dev->pcie_mpss) 2737 *smpss = dev->pcie_mpss; 2738 2739 return 0; 2740 } 2741 2742 static void pcie_write_mps(struct pci_dev *dev, int mps) 2743 { 2744 int rc; 2745 2746 if (pcie_bus_config == PCIE_BUS_PERFORMANCE) { 2747 mps = 128 << dev->pcie_mpss; 2748 2749 if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT && 2750 dev->bus->self) 2751 2752 /* 2753 * For "Performance", the assumption is made that 2754 * downstream communication will never be larger than 2755 * the MRRS. So, the MPS only needs to be configured 2756 * for the upstream communication. This being the case, 2757 * walk from the top down and set the MPS of the child 2758 * to that of the parent bus. 2759 * 2760 * Configure the device MPS with the smaller of the 2761 * device MPSS or the bridge MPS (which is assumed to be 2762 * properly configured at this point to the largest 2763 * allowable MPS based on its parent bus). 2764 */ 2765 mps = min(mps, pcie_get_mps(dev->bus->self)); 2766 } 2767 2768 rc = pcie_set_mps(dev, mps); 2769 if (rc) 2770 pci_err(dev, "Failed attempting to set the MPS\n"); 2771 } 2772 2773 static void pcie_write_mrrs(struct pci_dev *dev) 2774 { 2775 int rc, mrrs; 2776 2777 /* 2778 * In the "safe" case, do not configure the MRRS. There appear to be 2779 * issues with setting MRRS to 0 on a number of devices. 2780 */ 2781 if (pcie_bus_config != PCIE_BUS_PERFORMANCE) 2782 return; 2783 2784 /* 2785 * For max performance, the MRRS must be set to the largest supported 2786 * value. However, it cannot be configured larger than the MPS the 2787 * device or the bus can support. This should already be properly 2788 * configured by a prior call to pcie_write_mps(). 2789 */ 2790 mrrs = pcie_get_mps(dev); 2791 2792 /* 2793 * MRRS is a R/W register. Invalid values can be written, but a 2794 * subsequent read will verify if the value is acceptable or not. 2795 * If the MRRS value provided is not acceptable (e.g., too large), 2796 * shrink the value until it is acceptable to the HW. 2797 */ 2798 while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) { 2799 rc = pcie_set_readrq(dev, mrrs); 2800 if (!rc) 2801 break; 2802 2803 pci_warn(dev, "Failed attempting to set the MRRS\n"); 2804 mrrs /= 2; 2805 } 2806 2807 if (mrrs < 128) 2808 pci_err(dev, "MRRS was unable to be configured with a safe value. If problems are experienced, try running with pci=pcie_bus_safe\n"); 2809 } 2810 2811 static int pcie_bus_configure_set(struct pci_dev *dev, void *data) 2812 { 2813 int mps, orig_mps; 2814 2815 if (!pci_is_pcie(dev)) 2816 return 0; 2817 2818 if (pcie_bus_config == PCIE_BUS_TUNE_OFF || 2819 pcie_bus_config == PCIE_BUS_DEFAULT) 2820 return 0; 2821 2822 mps = 128 << *(u8 *)data; 2823 orig_mps = pcie_get_mps(dev); 2824 2825 pcie_write_mps(dev, mps); 2826 pcie_write_mrrs(dev); 2827 2828 pci_info(dev, "Max Payload Size set to %4d/%4d (was %4d), Max Read Rq %4d\n", 2829 pcie_get_mps(dev), 128 << dev->pcie_mpss, 2830 orig_mps, pcie_get_readrq(dev)); 2831 2832 return 0; 2833 } 2834 2835 /* 2836 * pcie_bus_configure_settings() requires that pci_walk_bus work in a top-down, 2837 * parents then children fashion. If this changes, then this code will not 2838 * work as designed. 2839 */ 2840 void pcie_bus_configure_settings(struct pci_bus *bus) 2841 { 2842 u8 smpss = 0; 2843 2844 if (!bus->self) 2845 return; 2846 2847 if (!pci_is_pcie(bus->self)) 2848 return; 2849 2850 /* 2851 * FIXME - Peer to peer DMA is possible, though the endpoint would need 2852 * to be aware of the MPS of the destination. To work around this, 2853 * simply force the MPS of the entire system to the smallest possible. 2854 */ 2855 if (pcie_bus_config == PCIE_BUS_PEER2PEER) 2856 smpss = 0; 2857 2858 if (pcie_bus_config == PCIE_BUS_SAFE) { 2859 smpss = bus->self->pcie_mpss; 2860 2861 pcie_find_smpss(bus->self, &smpss); 2862 pci_walk_bus(bus, pcie_find_smpss, &smpss); 2863 } 2864 2865 pcie_bus_configure_set(bus->self, &smpss); 2866 pci_walk_bus(bus, pcie_bus_configure_set, &smpss); 2867 } 2868 EXPORT_SYMBOL_GPL(pcie_bus_configure_settings); 2869 2870 /* 2871 * Called after each bus is probed, but before its children are examined. This 2872 * is marked as __weak because multiple architectures define it. 2873 */ 2874 void __weak pcibios_fixup_bus(struct pci_bus *bus) 2875 { 2876 /* nothing to do, expected to be removed in the future */ 2877 } 2878 2879 /** 2880 * pci_scan_child_bus_extend() - Scan devices below a bus 2881 * @bus: Bus to scan for devices 2882 * @available_buses: Total number of buses available (%0 does not try to 2883 * extend beyond the minimal) 2884 * 2885 * Scans devices below @bus including subordinate buses. Returns new 2886 * subordinate number including all the found devices. Passing 2887 * @available_buses causes the remaining bus space to be distributed 2888 * equally between hotplug-capable bridges to allow future extension of the 2889 * hierarchy. 2890 */ 2891 static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus, 2892 unsigned int available_buses) 2893 { 2894 unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0; 2895 unsigned int start = bus->busn_res.start; 2896 unsigned int devfn, cmax, max = start; 2897 struct pci_dev *dev; 2898 2899 dev_dbg(&bus->dev, "scanning bus\n"); 2900 2901 /* Go find them, Rover! */ 2902 for (devfn = 0; devfn < 256; devfn += 8) 2903 pci_scan_slot(bus, devfn); 2904 2905 /* Reserve buses for SR-IOV capability */ 2906 used_buses = pci_iov_bus_range(bus); 2907 max += used_buses; 2908 2909 /* 2910 * After performing arch-dependent fixup of the bus, look behind 2911 * all PCI-to-PCI bridges on this bus. 2912 */ 2913 if (!bus->is_added) { 2914 dev_dbg(&bus->dev, "fixups for bus\n"); 2915 pcibios_fixup_bus(bus); 2916 bus->is_added = 1; 2917 } 2918 2919 /* 2920 * Calculate how many hotplug bridges and normal bridges there 2921 * are on this bus. We will distribute the additional available 2922 * buses between hotplug bridges. 2923 */ 2924 for_each_pci_bridge(dev, bus) { 2925 if (dev->is_hotplug_bridge) 2926 hotplug_bridges++; 2927 else 2928 normal_bridges++; 2929 } 2930 2931 /* 2932 * Scan bridges that are already configured. We don't touch them 2933 * unless they are misconfigured (which will be done in the second 2934 * scan below). 2935 */ 2936 for_each_pci_bridge(dev, bus) { 2937 cmax = max; 2938 max = pci_scan_bridge_extend(bus, dev, max, 0, 0); 2939 2940 /* 2941 * Reserve one bus for each bridge now to avoid extending 2942 * hotplug bridges too much during the second scan below. 2943 */ 2944 used_buses++; 2945 if (max - cmax > 1) 2946 used_buses += max - cmax - 1; 2947 } 2948 2949 /* Scan bridges that need to be reconfigured */ 2950 for_each_pci_bridge(dev, bus) { 2951 unsigned int buses = 0; 2952 2953 if (!hotplug_bridges && normal_bridges == 1) { 2954 /* 2955 * There is only one bridge on the bus (upstream 2956 * port) so it gets all available buses which it 2957 * can then distribute to the possible hotplug 2958 * bridges below. 2959 */ 2960 buses = available_buses; 2961 } else if (dev->is_hotplug_bridge) { 2962 /* 2963 * Distribute the extra buses between hotplug 2964 * bridges if any. 2965 */ 2966 buses = available_buses / hotplug_bridges; 2967 buses = min(buses, available_buses - used_buses + 1); 2968 } 2969 2970 cmax = max; 2971 max = pci_scan_bridge_extend(bus, dev, cmax, buses, 1); 2972 /* One bus is already accounted so don't add it again */ 2973 if (max - cmax > 1) 2974 used_buses += max - cmax - 1; 2975 } 2976 2977 /* 2978 * Make sure a hotplug bridge has at least the minimum requested 2979 * number of buses but allow it to grow up to the maximum available 2980 * bus number if there is room. 2981 */ 2982 if (bus->self && bus->self->is_hotplug_bridge) { 2983 used_buses = max_t(unsigned int, available_buses, 2984 pci_hotplug_bus_size - 1); 2985 if (max - start < used_buses) { 2986 max = start + used_buses; 2987 2988 /* Do not allocate more buses than we have room left */ 2989 if (max > bus->busn_res.end) 2990 max = bus->busn_res.end; 2991 2992 dev_dbg(&bus->dev, "%pR extended by %#02x\n", 2993 &bus->busn_res, max - start); 2994 } 2995 } 2996 2997 /* 2998 * We've scanned the bus and so we know all about what's on 2999 * the other side of any bridges that may be on this bus plus 3000 * any devices. 3001 * 3002 * Return how far we've got finding sub-buses. 3003 */ 3004 dev_dbg(&bus->dev, "bus scan returning with max=%02x\n", max); 3005 return max; 3006 } 3007 3008 /** 3009 * pci_scan_child_bus() - Scan devices below a bus 3010 * @bus: Bus to scan for devices 3011 * 3012 * Scans devices below @bus including subordinate buses. Returns new 3013 * subordinate number including all the found devices. 3014 */ 3015 unsigned int pci_scan_child_bus(struct pci_bus *bus) 3016 { 3017 return pci_scan_child_bus_extend(bus, 0); 3018 } 3019 EXPORT_SYMBOL_GPL(pci_scan_child_bus); 3020 3021 /** 3022 * pcibios_root_bridge_prepare - Platform-specific host bridge setup 3023 * @bridge: Host bridge to set up 3024 * 3025 * Default empty implementation. Replace with an architecture-specific setup 3026 * routine, if necessary. 3027 */ 3028 int __weak pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) 3029 { 3030 return 0; 3031 } 3032 3033 void __weak pcibios_add_bus(struct pci_bus *bus) 3034 { 3035 } 3036 3037 void __weak pcibios_remove_bus(struct pci_bus *bus) 3038 { 3039 } 3040 3041 struct pci_bus *pci_create_root_bus(struct device *parent, int bus, 3042 struct pci_ops *ops, void *sysdata, struct list_head *resources) 3043 { 3044 int error; 3045 struct pci_host_bridge *bridge; 3046 3047 bridge = pci_alloc_host_bridge(0); 3048 if (!bridge) 3049 return NULL; 3050 3051 bridge->dev.parent = parent; 3052 3053 list_splice_init(resources, &bridge->windows); 3054 bridge->sysdata = sysdata; 3055 bridge->busnr = bus; 3056 bridge->ops = ops; 3057 3058 error = pci_register_host_bridge(bridge); 3059 if (error < 0) 3060 goto err_out; 3061 3062 return bridge->bus; 3063 3064 err_out: 3065 put_device(&bridge->dev); 3066 return NULL; 3067 } 3068 EXPORT_SYMBOL_GPL(pci_create_root_bus); 3069 3070 int pci_host_probe(struct pci_host_bridge *bridge) 3071 { 3072 struct pci_bus *bus, *child; 3073 int ret; 3074 3075 ret = pci_scan_root_bus_bridge(bridge); 3076 if (ret < 0) { 3077 dev_err(bridge->dev.parent, "Scanning root bridge failed"); 3078 return ret; 3079 } 3080 3081 bus = bridge->bus; 3082 3083 /* 3084 * We insert PCI resources into the iomem_resource and 3085 * ioport_resource trees in either pci_bus_claim_resources() 3086 * or pci_bus_assign_resources(). 3087 */ 3088 if (pci_has_flag(PCI_PROBE_ONLY)) { 3089 pci_bus_claim_resources(bus); 3090 } else { 3091 pci_bus_size_bridges(bus); 3092 pci_bus_assign_resources(bus); 3093 3094 list_for_each_entry(child, &bus->children, node) 3095 pcie_bus_configure_settings(child); 3096 } 3097 3098 pci_bus_add_devices(bus); 3099 return 0; 3100 } 3101 EXPORT_SYMBOL_GPL(pci_host_probe); 3102 3103 int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max) 3104 { 3105 struct resource *res = &b->busn_res; 3106 struct resource *parent_res, *conflict; 3107 3108 res->start = bus; 3109 res->end = bus_max; 3110 res->flags = IORESOURCE_BUS; 3111 3112 if (!pci_is_root_bus(b)) 3113 parent_res = &b->parent->busn_res; 3114 else { 3115 parent_res = get_pci_domain_busn_res(pci_domain_nr(b)); 3116 res->flags |= IORESOURCE_PCI_FIXED; 3117 } 3118 3119 conflict = request_resource_conflict(parent_res, res); 3120 3121 if (conflict) 3122 dev_info(&b->dev, 3123 "busn_res: can not insert %pR under %s%pR (conflicts with %s %pR)\n", 3124 res, pci_is_root_bus(b) ? "domain " : "", 3125 parent_res, conflict->name, conflict); 3126 3127 return conflict == NULL; 3128 } 3129 3130 int pci_bus_update_busn_res_end(struct pci_bus *b, int bus_max) 3131 { 3132 struct resource *res = &b->busn_res; 3133 struct resource old_res = *res; 3134 resource_size_t size; 3135 int ret; 3136 3137 if (res->start > bus_max) 3138 return -EINVAL; 3139 3140 size = bus_max - res->start + 1; 3141 ret = adjust_resource(res, res->start, size); 3142 dev_info(&b->dev, "busn_res: %pR end %s updated to %02x\n", 3143 &old_res, ret ? "can not be" : "is", bus_max); 3144 3145 if (!ret && !res->parent) 3146 pci_bus_insert_busn_res(b, res->start, res->end); 3147 3148 return ret; 3149 } 3150 3151 void pci_bus_release_busn_res(struct pci_bus *b) 3152 { 3153 struct resource *res = &b->busn_res; 3154 int ret; 3155 3156 if (!res->flags || !res->parent) 3157 return; 3158 3159 ret = release_resource(res); 3160 dev_info(&b->dev, "busn_res: %pR %s released\n", 3161 res, ret ? "can not be" : "is"); 3162 } 3163 3164 int pci_scan_root_bus_bridge(struct pci_host_bridge *bridge) 3165 { 3166 struct resource_entry *window; 3167 bool found = false; 3168 struct pci_bus *b; 3169 int max, bus, ret; 3170 3171 if (!bridge) 3172 return -EINVAL; 3173 3174 resource_list_for_each_entry(window, &bridge->windows) 3175 if (window->res->flags & IORESOURCE_BUS) { 3176 bridge->busnr = window->res->start; 3177 found = true; 3178 break; 3179 } 3180 3181 ret = pci_register_host_bridge(bridge); 3182 if (ret < 0) 3183 return ret; 3184 3185 b = bridge->bus; 3186 bus = bridge->busnr; 3187 3188 if (!found) { 3189 dev_info(&b->dev, 3190 "No busn resource found for root bus, will use [bus %02x-ff]\n", 3191 bus); 3192 pci_bus_insert_busn_res(b, bus, 255); 3193 } 3194 3195 max = pci_scan_child_bus(b); 3196 3197 if (!found) 3198 pci_bus_update_busn_res_end(b, max); 3199 3200 return 0; 3201 } 3202 EXPORT_SYMBOL(pci_scan_root_bus_bridge); 3203 3204 struct pci_bus *pci_scan_root_bus(struct device *parent, int bus, 3205 struct pci_ops *ops, void *sysdata, struct list_head *resources) 3206 { 3207 struct resource_entry *window; 3208 bool found = false; 3209 struct pci_bus *b; 3210 int max; 3211 3212 resource_list_for_each_entry(window, resources) 3213 if (window->res->flags & IORESOURCE_BUS) { 3214 found = true; 3215 break; 3216 } 3217 3218 b = pci_create_root_bus(parent, bus, ops, sysdata, resources); 3219 if (!b) 3220 return NULL; 3221 3222 if (!found) { 3223 dev_info(&b->dev, 3224 "No busn resource found for root bus, will use [bus %02x-ff]\n", 3225 bus); 3226 pci_bus_insert_busn_res(b, bus, 255); 3227 } 3228 3229 max = pci_scan_child_bus(b); 3230 3231 if (!found) 3232 pci_bus_update_busn_res_end(b, max); 3233 3234 return b; 3235 } 3236 EXPORT_SYMBOL(pci_scan_root_bus); 3237 3238 struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, 3239 void *sysdata) 3240 { 3241 LIST_HEAD(resources); 3242 struct pci_bus *b; 3243 3244 pci_add_resource(&resources, &ioport_resource); 3245 pci_add_resource(&resources, &iomem_resource); 3246 pci_add_resource(&resources, &busn_resource); 3247 b = pci_create_root_bus(NULL, bus, ops, sysdata, &resources); 3248 if (b) { 3249 pci_scan_child_bus(b); 3250 } else { 3251 pci_free_resource_list(&resources); 3252 } 3253 return b; 3254 } 3255 EXPORT_SYMBOL(pci_scan_bus); 3256 3257 /** 3258 * pci_rescan_bus_bridge_resize - Scan a PCI bus for devices 3259 * @bridge: PCI bridge for the bus to scan 3260 * 3261 * Scan a PCI bus and child buses for new devices, add them, 3262 * and enable them, resizing bridge mmio/io resource if necessary 3263 * and possible. The caller must ensure the child devices are already 3264 * removed for resizing to occur. 3265 * 3266 * Returns the max number of subordinate bus discovered. 3267 */ 3268 unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge) 3269 { 3270 unsigned int max; 3271 struct pci_bus *bus = bridge->subordinate; 3272 3273 max = pci_scan_child_bus(bus); 3274 3275 pci_assign_unassigned_bridge_resources(bridge); 3276 3277 pci_bus_add_devices(bus); 3278 3279 return max; 3280 } 3281 3282 /** 3283 * pci_rescan_bus - Scan a PCI bus for devices 3284 * @bus: PCI bus to scan 3285 * 3286 * Scan a PCI bus and child buses for new devices, add them, 3287 * and enable them. 3288 * 3289 * Returns the max number of subordinate bus discovered. 3290 */ 3291 unsigned int pci_rescan_bus(struct pci_bus *bus) 3292 { 3293 unsigned int max; 3294 3295 max = pci_scan_child_bus(bus); 3296 pci_assign_unassigned_bus_resources(bus); 3297 pci_bus_add_devices(bus); 3298 3299 return max; 3300 } 3301 EXPORT_SYMBOL_GPL(pci_rescan_bus); 3302 3303 /* 3304 * pci_rescan_bus(), pci_rescan_bus_bridge_resize() and PCI device removal 3305 * routines should always be executed under this mutex. 3306 */ 3307 static DEFINE_MUTEX(pci_rescan_remove_lock); 3308 3309 void pci_lock_rescan_remove(void) 3310 { 3311 mutex_lock(&pci_rescan_remove_lock); 3312 } 3313 EXPORT_SYMBOL_GPL(pci_lock_rescan_remove); 3314 3315 void pci_unlock_rescan_remove(void) 3316 { 3317 mutex_unlock(&pci_rescan_remove_lock); 3318 } 3319 EXPORT_SYMBOL_GPL(pci_unlock_rescan_remove); 3320 3321 static int __init pci_sort_bf_cmp(const struct device *d_a, 3322 const struct device *d_b) 3323 { 3324 const struct pci_dev *a = to_pci_dev(d_a); 3325 const struct pci_dev *b = to_pci_dev(d_b); 3326 3327 if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1; 3328 else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1; 3329 3330 if (a->bus->number < b->bus->number) return -1; 3331 else if (a->bus->number > b->bus->number) return 1; 3332 3333 if (a->devfn < b->devfn) return -1; 3334 else if (a->devfn > b->devfn) return 1; 3335 3336 return 0; 3337 } 3338 3339 void __init pci_sort_breadthfirst(void) 3340 { 3341 bus_sort_breadthfirst(&pci_bus_type, &pci_sort_bf_cmp); 3342 } 3343 3344 int pci_hp_add_bridge(struct pci_dev *dev) 3345 { 3346 struct pci_bus *parent = dev->bus; 3347 int busnr, start = parent->busn_res.start; 3348 unsigned int available_buses = 0; 3349 int end = parent->busn_res.end; 3350 3351 for (busnr = start; busnr <= end; busnr++) { 3352 if (!pci_find_bus(pci_domain_nr(parent), busnr)) 3353 break; 3354 } 3355 if (busnr-- > end) { 3356 pci_err(dev, "No bus number available for hot-added bridge\n"); 3357 return -1; 3358 } 3359 3360 /* Scan bridges that are already configured */ 3361 busnr = pci_scan_bridge(parent, dev, busnr, 0); 3362 3363 /* 3364 * Distribute the available bus numbers between hotplug-capable 3365 * bridges to make extending the chain later possible. 3366 */ 3367 available_buses = end - busnr; 3368 3369 /* Scan bridges that need to be reconfigured */ 3370 pci_scan_bridge_extend(parent, dev, busnr, available_buses, 1); 3371 3372 if (!dev->subordinate) 3373 return -1; 3374 3375 return 0; 3376 } 3377 EXPORT_SYMBOL_GPL(pci_hp_add_bridge); 3378