1 /* 2 * Compaq Hot Plug Controller Driver 3 * 4 * Copyright (C) 1995,2001 Compaq Computer Corporation 5 * Copyright (C) 2001 Greg Kroah-Hartman <greg@kroah.com> 6 * Copyright (C) 2001 IBM Corp. 7 * 8 * All rights reserved. 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or (at 13 * your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, but 16 * WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 18 * NON INFRINGEMENT. See the GNU General Public License for more 19 * details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 24 * 25 * Send feedback to <greg@kroah.com> 26 * 27 * Jan 12, 2003 - Added 66/100/133MHz PCI-X support, 28 * Torben Mathiasen <torben.mathiasen@hp.com> 29 */ 30 31 #include <linux/module.h> 32 #include <linux/moduleparam.h> 33 #include <linux/kernel.h> 34 #include <linux/types.h> 35 #include <linux/proc_fs.h> 36 #include <linux/slab.h> 37 #include <linux/workqueue.h> 38 #include <linux/pci.h> 39 #include <linux/pci_hotplug.h> 40 #include <linux/init.h> 41 #include <linux/interrupt.h> 42 43 #include <asm/uaccess.h> 44 45 #include "cpqphp.h" 46 #include "cpqphp_nvram.h" 47 48 49 /* Global variables */ 50 int cpqhp_debug; 51 int cpqhp_legacy_mode; 52 struct controller *cpqhp_ctrl_list; /* = NULL */ 53 struct pci_func *cpqhp_slot_list[256]; 54 struct irq_routing_table *cpqhp_routing_table; 55 56 /* local variables */ 57 static void __iomem *smbios_table; 58 static void __iomem *smbios_start; 59 static void __iomem *cpqhp_rom_start; 60 static bool power_mode; 61 static bool debug; 62 static int initialized; 63 64 #define DRIVER_VERSION "0.9.8" 65 #define DRIVER_AUTHOR "Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>" 66 #define DRIVER_DESC "Compaq Hot Plug PCI Controller Driver" 67 68 MODULE_AUTHOR(DRIVER_AUTHOR); 69 MODULE_DESCRIPTION(DRIVER_DESC); 70 MODULE_LICENSE("GPL"); 71 72 module_param(power_mode, bool, 0644); 73 MODULE_PARM_DESC(power_mode, "Power mode enabled or not"); 74 75 module_param(debug, bool, 0644); 76 MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); 77 78 #define CPQHPC_MODULE_MINOR 208 79 80 static inline int is_slot64bit(struct slot *slot) 81 { 82 return (readb(slot->p_sm_slot + SMBIOS_SLOT_WIDTH) == 0x06) ? 1 : 0; 83 } 84 85 static inline int is_slot66mhz(struct slot *slot) 86 { 87 return (readb(slot->p_sm_slot + SMBIOS_SLOT_TYPE) == 0x0E) ? 1 : 0; 88 } 89 90 /** 91 * detect_SMBIOS_pointer - find the System Management BIOS Table in mem region. 92 * @begin: begin pointer for region to be scanned. 93 * @end: end pointer for region to be scanned. 94 * 95 * Returns pointer to the head of the SMBIOS tables (or %NULL). 96 */ 97 static void __iomem *detect_SMBIOS_pointer(void __iomem *begin, void __iomem *end) 98 { 99 void __iomem *fp; 100 void __iomem *endp; 101 u8 temp1, temp2, temp3, temp4; 102 int status = 0; 103 104 endp = (end - sizeof(u32) + 1); 105 106 for (fp = begin; fp <= endp; fp += 16) { 107 temp1 = readb(fp); 108 temp2 = readb(fp+1); 109 temp3 = readb(fp+2); 110 temp4 = readb(fp+3); 111 if (temp1 == '_' && 112 temp2 == 'S' && 113 temp3 == 'M' && 114 temp4 == '_') { 115 status = 1; 116 break; 117 } 118 } 119 120 if (!status) 121 fp = NULL; 122 123 dbg("Discovered SMBIOS Entry point at %p\n", fp); 124 125 return fp; 126 } 127 128 /** 129 * init_SERR - Initializes the per slot SERR generation. 130 * @ctrl: controller to use 131 * 132 * For unexpected switch opens 133 */ 134 static int init_SERR(struct controller *ctrl) 135 { 136 u32 tempdword; 137 u32 number_of_slots; 138 u8 physical_slot; 139 140 if (!ctrl) 141 return 1; 142 143 tempdword = ctrl->first_slot; 144 145 number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F; 146 /* Loop through slots */ 147 while (number_of_slots) { 148 physical_slot = tempdword; 149 writeb(0, ctrl->hpc_reg + SLOT_SERR); 150 tempdword++; 151 number_of_slots--; 152 } 153 154 return 0; 155 } 156 157 static int init_cpqhp_routing_table(void) 158 { 159 int len; 160 161 cpqhp_routing_table = pcibios_get_irq_routing_table(); 162 if (cpqhp_routing_table == NULL) 163 return -ENOMEM; 164 165 len = cpqhp_routing_table_length(); 166 if (len == 0) { 167 kfree(cpqhp_routing_table); 168 cpqhp_routing_table = NULL; 169 return -1; 170 } 171 172 return 0; 173 } 174 175 /* nice debugging output */ 176 static void pci_print_IRQ_route(void) 177 { 178 int len; 179 int loop; 180 u8 tbus, tdevice, tslot; 181 182 len = cpqhp_routing_table_length(); 183 184 dbg("bus dev func slot\n"); 185 for (loop = 0; loop < len; ++loop) { 186 tbus = cpqhp_routing_table->slots[loop].bus; 187 tdevice = cpqhp_routing_table->slots[loop].devfn; 188 tslot = cpqhp_routing_table->slots[loop].slot; 189 dbg("%d %d %d %d\n", tbus, tdevice >> 3, tdevice & 0x7, tslot); 190 191 } 192 return; 193 } 194 195 196 /** 197 * get_subsequent_smbios_entry: get the next entry from bios table. 198 * @smbios_start: where to start in the SMBIOS table 199 * @smbios_table: location of the SMBIOS table 200 * @curr: %NULL or pointer to previously returned structure 201 * 202 * Gets the first entry if previous == NULL; 203 * otherwise, returns the next entry. 204 * Uses global SMBIOS Table pointer. 205 * 206 * Returns a pointer to an SMBIOS structure or NULL if none found. 207 */ 208 static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start, 209 void __iomem *smbios_table, 210 void __iomem *curr) 211 { 212 u8 bail = 0; 213 u8 previous_byte = 1; 214 void __iomem *p_temp; 215 void __iomem *p_max; 216 217 if (!smbios_table || !curr) 218 return NULL; 219 220 /* set p_max to the end of the table */ 221 p_max = smbios_start + readw(smbios_table + ST_LENGTH); 222 223 p_temp = curr; 224 p_temp += readb(curr + SMBIOS_GENERIC_LENGTH); 225 226 while ((p_temp < p_max) && !bail) { 227 /* Look for the double NULL terminator 228 * The first condition is the previous byte 229 * and the second is the curr 230 */ 231 if (!previous_byte && !(readb(p_temp))) 232 bail = 1; 233 234 previous_byte = readb(p_temp); 235 p_temp++; 236 } 237 238 if (p_temp < p_max) 239 return p_temp; 240 else 241 return NULL; 242 } 243 244 245 /** 246 * get_SMBIOS_entry - return the requested SMBIOS entry or %NULL 247 * @smbios_start: where to start in the SMBIOS table 248 * @smbios_table: location of the SMBIOS table 249 * @type: SMBIOS structure type to be returned 250 * @previous: %NULL or pointer to previously returned structure 251 * 252 * Gets the first entry of the specified type if previous == %NULL; 253 * Otherwise, returns the next entry of the given type. 254 * Uses global SMBIOS Table pointer. 255 * Uses get_subsequent_smbios_entry. 256 * 257 * Returns a pointer to an SMBIOS structure or %NULL if none found. 258 */ 259 static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start, 260 void __iomem *smbios_table, 261 u8 type, 262 void __iomem *previous) 263 { 264 if (!smbios_table) 265 return NULL; 266 267 if (!previous) 268 previous = smbios_start; 269 else 270 previous = get_subsequent_smbios_entry(smbios_start, 271 smbios_table, previous); 272 273 while (previous) 274 if (readb(previous + SMBIOS_GENERIC_TYPE) != type) 275 previous = get_subsequent_smbios_entry(smbios_start, 276 smbios_table, previous); 277 else 278 break; 279 280 return previous; 281 } 282 283 static void release_slot(struct hotplug_slot *hotplug_slot) 284 { 285 struct slot *slot = hotplug_slot->private; 286 287 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); 288 289 kfree(slot->hotplug_slot->info); 290 kfree(slot->hotplug_slot); 291 kfree(slot); 292 } 293 294 static int ctrl_slot_cleanup (struct controller *ctrl) 295 { 296 struct slot *old_slot, *next_slot; 297 298 old_slot = ctrl->slot; 299 ctrl->slot = NULL; 300 301 while (old_slot) { 302 /* memory will be freed by the release_slot callback */ 303 next_slot = old_slot->next; 304 pci_hp_deregister (old_slot->hotplug_slot); 305 old_slot = next_slot; 306 } 307 308 cpqhp_remove_debugfs_files(ctrl); 309 310 /* Free IRQ associated with hot plug device */ 311 free_irq(ctrl->interrupt, ctrl); 312 /* Unmap the memory */ 313 iounmap(ctrl->hpc_reg); 314 /* Finally reclaim PCI mem */ 315 release_mem_region(pci_resource_start(ctrl->pci_dev, 0), 316 pci_resource_len(ctrl->pci_dev, 0)); 317 318 return 0; 319 } 320 321 322 /** 323 * get_slot_mapping - determine logical slot mapping for PCI device 324 * 325 * Won't work for more than one PCI-PCI bridge in a slot. 326 * 327 * @bus_num - bus number of PCI device 328 * @dev_num - device number of PCI device 329 * @slot - Pointer to u8 where slot number will be returned 330 * 331 * Output: SUCCESS or FAILURE 332 */ 333 static int 334 get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot) 335 { 336 u32 work; 337 long len; 338 long loop; 339 340 u8 tbus, tdevice, tslot, bridgeSlot; 341 342 dbg("%s: %p, %d, %d, %p\n", __func__, bus, bus_num, dev_num, slot); 343 344 bridgeSlot = 0xFF; 345 346 len = cpqhp_routing_table_length(); 347 for (loop = 0; loop < len; ++loop) { 348 tbus = cpqhp_routing_table->slots[loop].bus; 349 tdevice = cpqhp_routing_table->slots[loop].devfn >> 3; 350 tslot = cpqhp_routing_table->slots[loop].slot; 351 352 if ((tbus == bus_num) && (tdevice == dev_num)) { 353 *slot = tslot; 354 return 0; 355 } else { 356 /* Did not get a match on the target PCI device. Check 357 * if the current IRQ table entry is a PCI-to-PCI 358 * bridge device. If so, and it's secondary bus 359 * matches the bus number for the target device, I need 360 * to save the bridge's slot number. If I can not find 361 * an entry for the target device, I will have to 362 * assume it's on the other side of the bridge, and 363 * assign it the bridge's slot. 364 */ 365 bus->number = tbus; 366 pci_bus_read_config_dword(bus, PCI_DEVFN(tdevice, 0), 367 PCI_CLASS_REVISION, &work); 368 369 if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) { 370 pci_bus_read_config_dword(bus, 371 PCI_DEVFN(tdevice, 0), 372 PCI_PRIMARY_BUS, &work); 373 // See if bridge's secondary bus matches target bus. 374 if (((work >> 8) & 0x000000FF) == (long) bus_num) 375 bridgeSlot = tslot; 376 } 377 } 378 379 } 380 381 /* If we got here, we didn't find an entry in the IRQ mapping table for 382 * the target PCI device. If we did determine that the target device 383 * is on the other side of a PCI-to-PCI bridge, return the slot number 384 * for the bridge. 385 */ 386 if (bridgeSlot != 0xFF) { 387 *slot = bridgeSlot; 388 return 0; 389 } 390 /* Couldn't find an entry in the routing table for this PCI device */ 391 return -1; 392 } 393 394 395 /** 396 * cpqhp_set_attention_status - Turns the Amber LED for a slot on or off 397 * @ctrl: struct controller to use 398 * @func: PCI device/function info 399 * @status: LED control flag: 1 = LED on, 0 = LED off 400 */ 401 static int 402 cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func, 403 u32 status) 404 { 405 u8 hp_slot; 406 407 if (func == NULL) 408 return 1; 409 410 hp_slot = func->device - ctrl->slot_device_offset; 411 412 /* Wait for exclusive access to hardware */ 413 mutex_lock(&ctrl->crit_sect); 414 415 if (status == 1) 416 amber_LED_on (ctrl, hp_slot); 417 else if (status == 0) 418 amber_LED_off (ctrl, hp_slot); 419 else { 420 /* Done with exclusive hardware access */ 421 mutex_unlock(&ctrl->crit_sect); 422 return 1; 423 } 424 425 set_SOGO(ctrl); 426 427 /* Wait for SOBS to be unset */ 428 wait_for_ctrl_irq (ctrl); 429 430 /* Done with exclusive hardware access */ 431 mutex_unlock(&ctrl->crit_sect); 432 433 return 0; 434 } 435 436 437 /** 438 * set_attention_status - Turns the Amber LED for a slot on or off 439 * @hotplug_slot: slot to change LED on 440 * @status: LED control flag 441 */ 442 static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status) 443 { 444 struct pci_func *slot_func; 445 struct slot *slot = hotplug_slot->private; 446 struct controller *ctrl = slot->ctrl; 447 u8 bus; 448 u8 devfn; 449 u8 device; 450 u8 function; 451 452 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); 453 454 if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1) 455 return -ENODEV; 456 457 device = devfn >> 3; 458 function = devfn & 0x7; 459 dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function); 460 461 slot_func = cpqhp_slot_find(bus, device, function); 462 if (!slot_func) 463 return -ENODEV; 464 465 return cpqhp_set_attention_status(ctrl, slot_func, status); 466 } 467 468 469 static int process_SI(struct hotplug_slot *hotplug_slot) 470 { 471 struct pci_func *slot_func; 472 struct slot *slot = hotplug_slot->private; 473 struct controller *ctrl = slot->ctrl; 474 u8 bus; 475 u8 devfn; 476 u8 device; 477 u8 function; 478 479 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); 480 481 if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1) 482 return -ENODEV; 483 484 device = devfn >> 3; 485 function = devfn & 0x7; 486 dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function); 487 488 slot_func = cpqhp_slot_find(bus, device, function); 489 if (!slot_func) 490 return -ENODEV; 491 492 slot_func->bus = bus; 493 slot_func->device = device; 494 slot_func->function = function; 495 slot_func->configured = 0; 496 dbg("board_added(%p, %p)\n", slot_func, ctrl); 497 return cpqhp_process_SI(ctrl, slot_func); 498 } 499 500 501 static int process_SS(struct hotplug_slot *hotplug_slot) 502 { 503 struct pci_func *slot_func; 504 struct slot *slot = hotplug_slot->private; 505 struct controller *ctrl = slot->ctrl; 506 u8 bus; 507 u8 devfn; 508 u8 device; 509 u8 function; 510 511 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); 512 513 if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1) 514 return -ENODEV; 515 516 device = devfn >> 3; 517 function = devfn & 0x7; 518 dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function); 519 520 slot_func = cpqhp_slot_find(bus, device, function); 521 if (!slot_func) 522 return -ENODEV; 523 524 dbg("In %s, slot_func = %p, ctrl = %p\n", __func__, slot_func, ctrl); 525 return cpqhp_process_SS(ctrl, slot_func); 526 } 527 528 529 static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value) 530 { 531 struct slot *slot = hotplug_slot->private; 532 struct controller *ctrl = slot->ctrl; 533 534 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); 535 536 return cpqhp_hardware_test(ctrl, value); 537 } 538 539 540 static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) 541 { 542 struct slot *slot = hotplug_slot->private; 543 struct controller *ctrl = slot->ctrl; 544 545 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); 546 547 *value = get_slot_enabled(ctrl, slot); 548 return 0; 549 } 550 551 static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) 552 { 553 struct slot *slot = hotplug_slot->private; 554 struct controller *ctrl = slot->ctrl; 555 556 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); 557 558 *value = cpq_get_attention_status(ctrl, slot); 559 return 0; 560 } 561 562 static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) 563 { 564 struct slot *slot = hotplug_slot->private; 565 struct controller *ctrl = slot->ctrl; 566 567 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); 568 569 *value = cpq_get_latch_status(ctrl, slot); 570 571 return 0; 572 } 573 574 static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) 575 { 576 struct slot *slot = hotplug_slot->private; 577 struct controller *ctrl = slot->ctrl; 578 579 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); 580 581 *value = get_presence_status(ctrl, slot); 582 583 return 0; 584 } 585 586 static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = { 587 .set_attention_status = set_attention_status, 588 .enable_slot = process_SI, 589 .disable_slot = process_SS, 590 .hardware_test = hardware_test, 591 .get_power_status = get_power_status, 592 .get_attention_status = get_attention_status, 593 .get_latch_status = get_latch_status, 594 .get_adapter_status = get_adapter_status, 595 }; 596 597 #define SLOT_NAME_SIZE 10 598 599 static int ctrl_slot_setup(struct controller *ctrl, 600 void __iomem *smbios_start, 601 void __iomem *smbios_table) 602 { 603 struct slot *slot; 604 struct hotplug_slot *hotplug_slot; 605 struct hotplug_slot_info *hotplug_slot_info; 606 struct pci_bus *bus = ctrl->pci_bus; 607 u8 number_of_slots; 608 u8 slot_device; 609 u8 slot_number; 610 u8 ctrl_slot; 611 u32 tempdword; 612 char name[SLOT_NAME_SIZE]; 613 void __iomem *slot_entry= NULL; 614 int result; 615 616 dbg("%s\n", __func__); 617 618 tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR); 619 620 number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F; 621 slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4; 622 slot_number = ctrl->first_slot; 623 624 while (number_of_slots) { 625 slot = kzalloc(sizeof(*slot), GFP_KERNEL); 626 if (!slot) { 627 result = -ENOMEM; 628 goto error; 629 } 630 631 slot->hotplug_slot = kzalloc(sizeof(*(slot->hotplug_slot)), 632 GFP_KERNEL); 633 if (!slot->hotplug_slot) { 634 result = -ENOMEM; 635 goto error_slot; 636 } 637 hotplug_slot = slot->hotplug_slot; 638 639 hotplug_slot->info = kzalloc(sizeof(*(hotplug_slot->info)), 640 GFP_KERNEL); 641 if (!hotplug_slot->info) { 642 result = -ENOMEM; 643 goto error_hpslot; 644 } 645 hotplug_slot_info = hotplug_slot->info; 646 647 slot->ctrl = ctrl; 648 slot->bus = ctrl->bus; 649 slot->device = slot_device; 650 slot->number = slot_number; 651 dbg("slot->number = %u\n", slot->number); 652 653 slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9, 654 slot_entry); 655 656 while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) != 657 slot->number)) { 658 slot_entry = get_SMBIOS_entry(smbios_start, 659 smbios_table, 9, slot_entry); 660 } 661 662 slot->p_sm_slot = slot_entry; 663 664 init_timer(&slot->task_event); 665 slot->task_event.expires = jiffies + 5 * HZ; 666 slot->task_event.function = cpqhp_pushbutton_thread; 667 668 /*FIXME: these capabilities aren't used but if they are 669 * they need to be correctly implemented 670 */ 671 slot->capabilities |= PCISLOT_REPLACE_SUPPORTED; 672 slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED; 673 674 if (is_slot64bit(slot)) 675 slot->capabilities |= PCISLOT_64_BIT_SUPPORTED; 676 if (is_slot66mhz(slot)) 677 slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED; 678 if (bus->cur_bus_speed == PCI_SPEED_66MHz) 679 slot->capabilities |= PCISLOT_66_MHZ_OPERATION; 680 681 ctrl_slot = 682 slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4); 683 684 /* Check presence */ 685 slot->capabilities |= 686 ((((~tempdword) >> 23) | 687 ((~tempdword) >> 15)) >> ctrl_slot) & 0x02; 688 /* Check the switch state */ 689 slot->capabilities |= 690 ((~tempdword & 0xFF) >> ctrl_slot) & 0x01; 691 /* Check the slot enable */ 692 slot->capabilities |= 693 ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04; 694 695 /* register this slot with the hotplug pci core */ 696 hotplug_slot->release = &release_slot; 697 hotplug_slot->private = slot; 698 snprintf(name, SLOT_NAME_SIZE, "%u", slot->number); 699 hotplug_slot->ops = &cpqphp_hotplug_slot_ops; 700 701 hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot); 702 hotplug_slot_info->attention_status = 703 cpq_get_attention_status(ctrl, slot); 704 hotplug_slot_info->latch_status = 705 cpq_get_latch_status(ctrl, slot); 706 hotplug_slot_info->adapter_status = 707 get_presence_status(ctrl, slot); 708 709 dbg("registering bus %d, dev %d, number %d, ctrl->slot_device_offset %d, slot %d\n", 710 slot->bus, slot->device, 711 slot->number, ctrl->slot_device_offset, 712 slot_number); 713 result = pci_hp_register(hotplug_slot, 714 ctrl->pci_dev->bus, 715 slot->device, 716 name); 717 if (result) { 718 err("pci_hp_register failed with error %d\n", result); 719 goto error_info; 720 } 721 722 slot->next = ctrl->slot; 723 ctrl->slot = slot; 724 725 number_of_slots--; 726 slot_device++; 727 slot_number++; 728 } 729 730 return 0; 731 error_info: 732 kfree(hotplug_slot_info); 733 error_hpslot: 734 kfree(hotplug_slot); 735 error_slot: 736 kfree(slot); 737 error: 738 return result; 739 } 740 741 static int one_time_init(void) 742 { 743 int loop; 744 int retval = 0; 745 746 if (initialized) 747 return 0; 748 749 power_mode = 0; 750 751 retval = init_cpqhp_routing_table(); 752 if (retval) 753 goto error; 754 755 if (cpqhp_debug) 756 pci_print_IRQ_route(); 757 758 dbg("Initialize + Start the notification mechanism \n"); 759 760 retval = cpqhp_event_start_thread(); 761 if (retval) 762 goto error; 763 764 dbg("Initialize slot lists\n"); 765 for (loop = 0; loop < 256; loop++) 766 cpqhp_slot_list[loop] = NULL; 767 768 /* FIXME: We also need to hook the NMI handler eventually. 769 * this also needs to be worked with Christoph 770 * register_NMI_handler(); 771 */ 772 /* Map rom address */ 773 cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN); 774 if (!cpqhp_rom_start) { 775 err ("Could not ioremap memory region for ROM\n"); 776 retval = -EIO; 777 goto error; 778 } 779 780 /* Now, map the int15 entry point if we are on compaq specific 781 * hardware 782 */ 783 compaq_nvram_init(cpqhp_rom_start); 784 785 /* Map smbios table entry point structure */ 786 smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start, 787 cpqhp_rom_start + ROM_PHY_LEN); 788 if (!smbios_table) { 789 err ("Could not find the SMBIOS pointer in memory\n"); 790 retval = -EIO; 791 goto error_rom_start; 792 } 793 794 smbios_start = ioremap(readl(smbios_table + ST_ADDRESS), 795 readw(smbios_table + ST_LENGTH)); 796 if (!smbios_start) { 797 err ("Could not ioremap memory region taken from SMBIOS values\n"); 798 retval = -EIO; 799 goto error_smbios_start; 800 } 801 802 initialized = 1; 803 804 return retval; 805 806 error_smbios_start: 807 iounmap(smbios_start); 808 error_rom_start: 809 iounmap(cpqhp_rom_start); 810 error: 811 return retval; 812 } 813 814 static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 815 { 816 u8 num_of_slots = 0; 817 u8 hp_slot = 0; 818 u8 device; 819 u8 bus_cap; 820 u16 temp_word; 821 u16 vendor_id; 822 u16 subsystem_vid; 823 u16 subsystem_deviceid; 824 u32 rc; 825 struct controller *ctrl; 826 struct pci_func *func; 827 struct pci_bus *bus; 828 int err; 829 830 err = pci_enable_device(pdev); 831 if (err) { 832 printk(KERN_ERR MY_NAME ": cannot enable PCI device %s (%d)\n", 833 pci_name(pdev), err); 834 return err; 835 } 836 837 bus = pdev->subordinate; 838 if (!bus) { 839 dev_notice(&pdev->dev, "the device is not a bridge, skipping\n"); 840 rc = -ENODEV; 841 goto err_disable_device; 842 } 843 844 /* Need to read VID early b/c it's used to differentiate CPQ and INTC 845 * discovery 846 */ 847 vendor_id = pdev->vendor; 848 if ((vendor_id != PCI_VENDOR_ID_COMPAQ) && 849 (vendor_id != PCI_VENDOR_ID_INTEL)) { 850 err(msg_HPC_non_compaq_or_intel); 851 rc = -ENODEV; 852 goto err_disable_device; 853 } 854 dbg("Vendor ID: %x\n", vendor_id); 855 856 dbg("revision: %d\n", pdev->revision); 857 if ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!pdev->revision)) { 858 err(msg_HPC_rev_error); 859 rc = -ENODEV; 860 goto err_disable_device; 861 } 862 863 /* Check for the proper subsystem IDs 864 * Intel uses a different SSID programming model than Compaq. 865 * For Intel, each SSID bit identifies a PHP capability. 866 * Also Intel HPCs may have RID=0. 867 */ 868 if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL)) { 869 err(msg_HPC_not_supported); 870 return -ENODEV; 871 } 872 873 /* TODO: This code can be made to support non-Compaq or Intel 874 * subsystem IDs 875 */ 876 subsystem_vid = pdev->subsystem_vendor; 877 dbg("Subsystem Vendor ID: %x\n", subsystem_vid); 878 if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) { 879 err(msg_HPC_non_compaq_or_intel); 880 rc = -ENODEV; 881 goto err_disable_device; 882 } 883 884 ctrl = kzalloc(sizeof(struct controller), GFP_KERNEL); 885 if (!ctrl) { 886 err("%s : out of memory\n", __func__); 887 rc = -ENOMEM; 888 goto err_disable_device; 889 } 890 891 subsystem_deviceid = pdev->subsystem_device; 892 893 info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid); 894 895 /* Set Vendor ID, so it can be accessed later from other 896 * functions 897 */ 898 ctrl->vendor_id = vendor_id; 899 900 switch (subsystem_vid) { 901 case PCI_VENDOR_ID_COMPAQ: 902 if (pdev->revision >= 0x13) { /* CIOBX */ 903 ctrl->push_flag = 1; 904 ctrl->slot_switch_type = 1; 905 ctrl->push_button = 1; 906 ctrl->pci_config_space = 1; 907 ctrl->defeature_PHP = 1; 908 ctrl->pcix_support = 1; 909 ctrl->pcix_speed_capability = 1; 910 pci_read_config_byte(pdev, 0x41, &bus_cap); 911 if (bus_cap & 0x80) { 912 dbg("bus max supports 133MHz PCI-X\n"); 913 bus->max_bus_speed = PCI_SPEED_133MHz_PCIX; 914 break; 915 } 916 if (bus_cap & 0x40) { 917 dbg("bus max supports 100MHz PCI-X\n"); 918 bus->max_bus_speed = PCI_SPEED_100MHz_PCIX; 919 break; 920 } 921 if (bus_cap & 0x20) { 922 dbg("bus max supports 66MHz PCI-X\n"); 923 bus->max_bus_speed = PCI_SPEED_66MHz_PCIX; 924 break; 925 } 926 if (bus_cap & 0x10) { 927 dbg("bus max supports 66MHz PCI\n"); 928 bus->max_bus_speed = PCI_SPEED_66MHz; 929 break; 930 } 931 932 break; 933 } 934 935 switch (subsystem_deviceid) { 936 case PCI_SUB_HPC_ID: 937 /* Original 6500/7000 implementation */ 938 ctrl->slot_switch_type = 1; 939 bus->max_bus_speed = PCI_SPEED_33MHz; 940 ctrl->push_button = 0; 941 ctrl->pci_config_space = 1; 942 ctrl->defeature_PHP = 1; 943 ctrl->pcix_support = 0; 944 ctrl->pcix_speed_capability = 0; 945 break; 946 case PCI_SUB_HPC_ID2: 947 /* First Pushbutton implementation */ 948 ctrl->push_flag = 1; 949 ctrl->slot_switch_type = 1; 950 bus->max_bus_speed = PCI_SPEED_33MHz; 951 ctrl->push_button = 1; 952 ctrl->pci_config_space = 1; 953 ctrl->defeature_PHP = 1; 954 ctrl->pcix_support = 0; 955 ctrl->pcix_speed_capability = 0; 956 break; 957 case PCI_SUB_HPC_ID_INTC: 958 /* Third party (6500/7000) */ 959 ctrl->slot_switch_type = 1; 960 bus->max_bus_speed = PCI_SPEED_33MHz; 961 ctrl->push_button = 0; 962 ctrl->pci_config_space = 1; 963 ctrl->defeature_PHP = 1; 964 ctrl->pcix_support = 0; 965 ctrl->pcix_speed_capability = 0; 966 break; 967 case PCI_SUB_HPC_ID3: 968 /* First 66 Mhz implementation */ 969 ctrl->push_flag = 1; 970 ctrl->slot_switch_type = 1; 971 bus->max_bus_speed = PCI_SPEED_66MHz; 972 ctrl->push_button = 1; 973 ctrl->pci_config_space = 1; 974 ctrl->defeature_PHP = 1; 975 ctrl->pcix_support = 0; 976 ctrl->pcix_speed_capability = 0; 977 break; 978 case PCI_SUB_HPC_ID4: 979 /* First PCI-X implementation, 100MHz */ 980 ctrl->push_flag = 1; 981 ctrl->slot_switch_type = 1; 982 bus->max_bus_speed = PCI_SPEED_100MHz_PCIX; 983 ctrl->push_button = 1; 984 ctrl->pci_config_space = 1; 985 ctrl->defeature_PHP = 1; 986 ctrl->pcix_support = 1; 987 ctrl->pcix_speed_capability = 0; 988 break; 989 default: 990 err(msg_HPC_not_supported); 991 rc = -ENODEV; 992 goto err_free_ctrl; 993 } 994 break; 995 996 case PCI_VENDOR_ID_INTEL: 997 /* Check for speed capability (0=33, 1=66) */ 998 if (subsystem_deviceid & 0x0001) 999 bus->max_bus_speed = PCI_SPEED_66MHz; 1000 else 1001 bus->max_bus_speed = PCI_SPEED_33MHz; 1002 1003 /* Check for push button */ 1004 if (subsystem_deviceid & 0x0002) 1005 ctrl->push_button = 0; 1006 else 1007 ctrl->push_button = 1; 1008 1009 /* Check for slot switch type (0=mechanical, 1=not mechanical) */ 1010 if (subsystem_deviceid & 0x0004) 1011 ctrl->slot_switch_type = 0; 1012 else 1013 ctrl->slot_switch_type = 1; 1014 1015 /* PHP Status (0=De-feature PHP, 1=Normal operation) */ 1016 if (subsystem_deviceid & 0x0008) 1017 ctrl->defeature_PHP = 1; /* PHP supported */ 1018 else 1019 ctrl->defeature_PHP = 0; /* PHP not supported */ 1020 1021 /* Alternate Base Address Register Interface 1022 * (0=not supported, 1=supported) 1023 */ 1024 if (subsystem_deviceid & 0x0010) 1025 ctrl->alternate_base_address = 1; 1026 else 1027 ctrl->alternate_base_address = 0; 1028 1029 /* PCI Config Space Index (0=not supported, 1=supported) */ 1030 if (subsystem_deviceid & 0x0020) 1031 ctrl->pci_config_space = 1; 1032 else 1033 ctrl->pci_config_space = 0; 1034 1035 /* PCI-X support */ 1036 if (subsystem_deviceid & 0x0080) { 1037 ctrl->pcix_support = 1; 1038 if (subsystem_deviceid & 0x0040) 1039 /* 133MHz PCI-X if bit 7 is 1 */ 1040 ctrl->pcix_speed_capability = 1; 1041 else 1042 /* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */ 1043 /* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */ 1044 ctrl->pcix_speed_capability = 0; 1045 } else { 1046 /* Conventional PCI */ 1047 ctrl->pcix_support = 0; 1048 ctrl->pcix_speed_capability = 0; 1049 } 1050 break; 1051 1052 default: 1053 err(msg_HPC_not_supported); 1054 rc = -ENODEV; 1055 goto err_free_ctrl; 1056 } 1057 1058 /* Tell the user that we found one. */ 1059 info("Initializing the PCI hot plug controller residing on PCI bus %d\n", 1060 pdev->bus->number); 1061 1062 dbg("Hotplug controller capabilities:\n"); 1063 dbg(" speed_capability %d\n", bus->max_bus_speed); 1064 dbg(" slot_switch_type %s\n", ctrl->slot_switch_type ? 1065 "switch present" : "no switch"); 1066 dbg(" defeature_PHP %s\n", ctrl->defeature_PHP ? 1067 "PHP supported" : "PHP not supported"); 1068 dbg(" alternate_base_address %s\n", ctrl->alternate_base_address ? 1069 "supported" : "not supported"); 1070 dbg(" pci_config_space %s\n", ctrl->pci_config_space ? 1071 "supported" : "not supported"); 1072 dbg(" pcix_speed_capability %s\n", ctrl->pcix_speed_capability ? 1073 "supported" : "not supported"); 1074 dbg(" pcix_support %s\n", ctrl->pcix_support ? 1075 "supported" : "not supported"); 1076 1077 ctrl->pci_dev = pdev; 1078 pci_set_drvdata(pdev, ctrl); 1079 1080 /* make our own copy of the pci bus structure, 1081 * as we like tweaking it a lot */ 1082 ctrl->pci_bus = kmemdup(pdev->bus, sizeof(*ctrl->pci_bus), GFP_KERNEL); 1083 if (!ctrl->pci_bus) { 1084 err("out of memory\n"); 1085 rc = -ENOMEM; 1086 goto err_free_ctrl; 1087 } 1088 1089 ctrl->bus = pdev->bus->number; 1090 ctrl->rev = pdev->revision; 1091 dbg("bus device function rev: %d %d %d %d\n", ctrl->bus, 1092 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), ctrl->rev); 1093 1094 mutex_init(&ctrl->crit_sect); 1095 init_waitqueue_head(&ctrl->queue); 1096 1097 /* initialize our threads if they haven't already been started up */ 1098 rc = one_time_init(); 1099 if (rc) 1100 goto err_free_bus; 1101 1102 dbg("pdev = %p\n", pdev); 1103 dbg("pci resource start %llx\n", (unsigned long long)pci_resource_start(pdev, 0)); 1104 dbg("pci resource len %llx\n", (unsigned long long)pci_resource_len(pdev, 0)); 1105 1106 if (!request_mem_region(pci_resource_start(pdev, 0), 1107 pci_resource_len(pdev, 0), MY_NAME)) { 1108 err("cannot reserve MMIO region\n"); 1109 rc = -ENOMEM; 1110 goto err_free_bus; 1111 } 1112 1113 ctrl->hpc_reg = ioremap(pci_resource_start(pdev, 0), 1114 pci_resource_len(pdev, 0)); 1115 if (!ctrl->hpc_reg) { 1116 err("cannot remap MMIO region %llx @ %llx\n", 1117 (unsigned long long)pci_resource_len(pdev, 0), 1118 (unsigned long long)pci_resource_start(pdev, 0)); 1119 rc = -ENODEV; 1120 goto err_free_mem_region; 1121 } 1122 1123 /* Check for 66Mhz operation */ 1124 bus->cur_bus_speed = get_controller_speed(ctrl); 1125 1126 1127 /******************************************************** 1128 * 1129 * Save configuration headers for this and 1130 * subordinate PCI buses 1131 * 1132 ********************************************************/ 1133 1134 /* find the physical slot number of the first hot plug slot */ 1135 1136 /* Get slot won't work for devices behind bridges, but 1137 * in this case it will always be called for the "base" 1138 * bus/dev/func of a slot. 1139 * CS: this is leveraging the PCIIRQ routing code from the kernel 1140 * (pci-pc.c: get_irq_routing_table) */ 1141 rc = get_slot_mapping(ctrl->pci_bus, pdev->bus->number, 1142 (readb(ctrl->hpc_reg + SLOT_MASK) >> 4), 1143 &(ctrl->first_slot)); 1144 dbg("get_slot_mapping: first_slot = %d, returned = %d\n", 1145 ctrl->first_slot, rc); 1146 if (rc) { 1147 err(msg_initialization_err, rc); 1148 goto err_iounmap; 1149 } 1150 1151 /* Store PCI Config Space for all devices on this bus */ 1152 rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK)); 1153 if (rc) { 1154 err("%s: unable to save PCI configuration data, error %d\n", 1155 __func__, rc); 1156 goto err_iounmap; 1157 } 1158 1159 /* 1160 * Get IO, memory, and IRQ resources for new devices 1161 */ 1162 /* The next line is required for cpqhp_find_available_resources */ 1163 ctrl->interrupt = pdev->irq; 1164 if (ctrl->interrupt < 0x10) { 1165 cpqhp_legacy_mode = 1; 1166 dbg("System seems to be configured for Full Table Mapped MPS mode\n"); 1167 } 1168 1169 ctrl->cfgspc_irq = 0; 1170 pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &ctrl->cfgspc_irq); 1171 1172 rc = cpqhp_find_available_resources(ctrl, cpqhp_rom_start); 1173 ctrl->add_support = !rc; 1174 if (rc) { 1175 dbg("cpqhp_find_available_resources = 0x%x\n", rc); 1176 err("unable to locate PCI configuration resources for hot plug add.\n"); 1177 goto err_iounmap; 1178 } 1179 1180 /* 1181 * Finish setting up the hot plug ctrl device 1182 */ 1183 ctrl->slot_device_offset = readb(ctrl->hpc_reg + SLOT_MASK) >> 4; 1184 dbg("NumSlots %d \n", ctrl->slot_device_offset); 1185 1186 ctrl->next_event = 0; 1187 1188 /* Setup the slot information structures */ 1189 rc = ctrl_slot_setup(ctrl, smbios_start, smbios_table); 1190 if (rc) { 1191 err(msg_initialization_err, 6); 1192 err("%s: unable to save PCI configuration data, error %d\n", 1193 __func__, rc); 1194 goto err_iounmap; 1195 } 1196 1197 /* Mask all general input interrupts */ 1198 writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_MASK); 1199 1200 /* set up the interrupt */ 1201 dbg("HPC interrupt = %d \n", ctrl->interrupt); 1202 if (request_irq(ctrl->interrupt, cpqhp_ctrl_intr, 1203 IRQF_SHARED, MY_NAME, ctrl)) { 1204 err("Can't get irq %d for the hotplug pci controller\n", 1205 ctrl->interrupt); 1206 rc = -ENODEV; 1207 goto err_iounmap; 1208 } 1209 1210 /* Enable Shift Out interrupt and clear it, also enable SERR on power 1211 * fault 1212 */ 1213 temp_word = readw(ctrl->hpc_reg + MISC); 1214 temp_word |= 0x4006; 1215 writew(temp_word, ctrl->hpc_reg + MISC); 1216 1217 /* Changed 05/05/97 to clear all interrupts at start */ 1218 writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_INPUT_CLEAR); 1219 1220 ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR); 1221 1222 writel(0x0L, ctrl->hpc_reg + INT_MASK); 1223 1224 if (!cpqhp_ctrl_list) { 1225 cpqhp_ctrl_list = ctrl; 1226 ctrl->next = NULL; 1227 } else { 1228 ctrl->next = cpqhp_ctrl_list; 1229 cpqhp_ctrl_list = ctrl; 1230 } 1231 1232 /* turn off empty slots here unless command line option "ON" set 1233 * Wait for exclusive access to hardware 1234 */ 1235 mutex_lock(&ctrl->crit_sect); 1236 1237 num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F; 1238 1239 /* find first device number for the ctrl */ 1240 device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4; 1241 1242 while (num_of_slots) { 1243 dbg("num_of_slots: %d\n", num_of_slots); 1244 func = cpqhp_slot_find(ctrl->bus, device, 0); 1245 if (!func) 1246 break; 1247 1248 hp_slot = func->device - ctrl->slot_device_offset; 1249 dbg("hp_slot: %d\n", hp_slot); 1250 1251 /* We have to save the presence info for these slots */ 1252 temp_word = ctrl->ctrl_int_comp >> 16; 1253 func->presence_save = (temp_word >> hp_slot) & 0x01; 1254 func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; 1255 1256 if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) 1257 func->switch_save = 0; 1258 else 1259 func->switch_save = 0x10; 1260 1261 if (!power_mode) 1262 if (!func->is_a_board) { 1263 green_LED_off(ctrl, hp_slot); 1264 slot_disable(ctrl, hp_slot); 1265 } 1266 1267 device++; 1268 num_of_slots--; 1269 } 1270 1271 if (!power_mode) { 1272 set_SOGO(ctrl); 1273 /* Wait for SOBS to be unset */ 1274 wait_for_ctrl_irq(ctrl); 1275 } 1276 1277 rc = init_SERR(ctrl); 1278 if (rc) { 1279 err("init_SERR failed\n"); 1280 mutex_unlock(&ctrl->crit_sect); 1281 goto err_free_irq; 1282 } 1283 1284 /* Done with exclusive hardware access */ 1285 mutex_unlock(&ctrl->crit_sect); 1286 1287 cpqhp_create_debugfs_files(ctrl); 1288 1289 return 0; 1290 1291 err_free_irq: 1292 free_irq(ctrl->interrupt, ctrl); 1293 err_iounmap: 1294 iounmap(ctrl->hpc_reg); 1295 err_free_mem_region: 1296 release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); 1297 err_free_bus: 1298 kfree(ctrl->pci_bus); 1299 err_free_ctrl: 1300 kfree(ctrl); 1301 err_disable_device: 1302 pci_disable_device(pdev); 1303 return rc; 1304 } 1305 1306 static void __exit unload_cpqphpd(void) 1307 { 1308 struct pci_func *next; 1309 struct pci_func *TempSlot; 1310 int loop; 1311 u32 rc; 1312 struct controller *ctrl; 1313 struct controller *tctrl; 1314 struct pci_resource *res; 1315 struct pci_resource *tres; 1316 1317 rc = compaq_nvram_store(cpqhp_rom_start); 1318 1319 ctrl = cpqhp_ctrl_list; 1320 1321 while (ctrl) { 1322 if (ctrl->hpc_reg) { 1323 u16 misc; 1324 rc = read_slot_enable (ctrl); 1325 1326 writeb(0, ctrl->hpc_reg + SLOT_SERR); 1327 writel(0xFFFFFFC0L | ~rc, ctrl->hpc_reg + INT_MASK); 1328 1329 misc = readw(ctrl->hpc_reg + MISC); 1330 misc &= 0xFFFD; 1331 writew(misc, ctrl->hpc_reg + MISC); 1332 } 1333 1334 ctrl_slot_cleanup(ctrl); 1335 1336 res = ctrl->io_head; 1337 while (res) { 1338 tres = res; 1339 res = res->next; 1340 kfree(tres); 1341 } 1342 1343 res = ctrl->mem_head; 1344 while (res) { 1345 tres = res; 1346 res = res->next; 1347 kfree(tres); 1348 } 1349 1350 res = ctrl->p_mem_head; 1351 while (res) { 1352 tres = res; 1353 res = res->next; 1354 kfree(tres); 1355 } 1356 1357 res = ctrl->bus_head; 1358 while (res) { 1359 tres = res; 1360 res = res->next; 1361 kfree(tres); 1362 } 1363 1364 kfree (ctrl->pci_bus); 1365 1366 tctrl = ctrl; 1367 ctrl = ctrl->next; 1368 kfree(tctrl); 1369 } 1370 1371 for (loop = 0; loop < 256; loop++) { 1372 next = cpqhp_slot_list[loop]; 1373 while (next != NULL) { 1374 res = next->io_head; 1375 while (res) { 1376 tres = res; 1377 res = res->next; 1378 kfree(tres); 1379 } 1380 1381 res = next->mem_head; 1382 while (res) { 1383 tres = res; 1384 res = res->next; 1385 kfree(tres); 1386 } 1387 1388 res = next->p_mem_head; 1389 while (res) { 1390 tres = res; 1391 res = res->next; 1392 kfree(tres); 1393 } 1394 1395 res = next->bus_head; 1396 while (res) { 1397 tres = res; 1398 res = res->next; 1399 kfree(tres); 1400 } 1401 1402 TempSlot = next; 1403 next = next->next; 1404 kfree(TempSlot); 1405 } 1406 } 1407 1408 /* Stop the notification mechanism */ 1409 if (initialized) 1410 cpqhp_event_stop_thread(); 1411 1412 /* unmap the rom address */ 1413 if (cpqhp_rom_start) 1414 iounmap(cpqhp_rom_start); 1415 if (smbios_start) 1416 iounmap(smbios_start); 1417 } 1418 1419 static struct pci_device_id hpcd_pci_tbl[] = { 1420 { 1421 /* handle any PCI Hotplug controller */ 1422 .class = ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00), 1423 .class_mask = ~0, 1424 1425 /* no matter who makes it */ 1426 .vendor = PCI_ANY_ID, 1427 .device = PCI_ANY_ID, 1428 .subvendor = PCI_ANY_ID, 1429 .subdevice = PCI_ANY_ID, 1430 1431 }, { /* end: all zeroes */ } 1432 }; 1433 1434 MODULE_DEVICE_TABLE(pci, hpcd_pci_tbl); 1435 1436 static struct pci_driver cpqhpc_driver = { 1437 .name = "compaq_pci_hotplug", 1438 .id_table = hpcd_pci_tbl, 1439 .probe = cpqhpc_probe, 1440 /* remove: cpqhpc_remove_one, */ 1441 }; 1442 1443 static int __init cpqhpc_init(void) 1444 { 1445 int result; 1446 1447 cpqhp_debug = debug; 1448 1449 info (DRIVER_DESC " version: " DRIVER_VERSION "\n"); 1450 cpqhp_initialize_debugfs(); 1451 result = pci_register_driver(&cpqhpc_driver); 1452 dbg("pci_register_driver = %d\n", result); 1453 return result; 1454 } 1455 1456 static void __exit cpqhpc_cleanup(void) 1457 { 1458 dbg("unload_cpqphpd()\n"); 1459 unload_cpqphpd(); 1460 1461 dbg("pci_unregister_driver\n"); 1462 pci_unregister_driver(&cpqhpc_driver); 1463 cpqhp_shutdown_debugfs(); 1464 } 1465 1466 module_init(cpqhpc_init); 1467 module_exit(cpqhpc_cleanup); 1468