1# SPDX-License-Identifier: GPL-2.0 2# 3# PCI configuration 4# 5 6# select this to offer the PCI prompt 7config HAVE_PCI 8 bool 9 10# select this to unconditionally force on PCI support 11config FORCE_PCI 12 bool 13 select HAVE_PCI 14 select PCI 15 16# select this to provide a generic PCI iomap, 17# without PCI itself having to be defined 18config GENERIC_PCI_IOMAP 19 bool 20 21menuconfig PCI 22 bool "PCI support" 23 depends on HAVE_PCI 24 help 25 This option enables support for the PCI local bus, including 26 support for PCI-X and the foundations for PCI Express support. 27 Say 'Y' here unless you know what you are doing. 28 29if PCI 30 31config PCI_DOMAINS 32 bool 33 depends on PCI 34 35config PCI_DOMAINS_GENERIC 36 bool 37 select PCI_DOMAINS 38 39config PCI_SYSCALL 40 bool 41 42source "drivers/pci/pcie/Kconfig" 43 44config PCI_MSI 45 bool "Message Signaled Interrupts (MSI and MSI-X)" 46 select GENERIC_MSI_IRQ 47 help 48 This allows device drivers to enable MSI (Message Signaled 49 Interrupts). Message Signaled Interrupts enable a device to 50 generate an interrupt using an inbound Memory Write on its 51 PCI bus instead of asserting a device IRQ pin. 52 53 Use of PCI MSI interrupts can be disabled at kernel boot time 54 by using the 'pci=nomsi' option. This disables MSI for the 55 entire system. 56 57 If you don't know what to do here, say Y. 58 59config PCI_MSI_ARCH_FALLBACKS 60 bool 61 62config PCI_QUIRKS 63 default y 64 bool "Enable PCI quirk workarounds" if EXPERT 65 help 66 This enables workarounds for various PCI chipset bugs/quirks. 67 Disable this only if your target machine is unaffected by PCI 68 quirks. 69 70config PCI_DEBUG 71 bool "PCI Debugging" 72 depends on DEBUG_KERNEL 73 help 74 Say Y here if you want the PCI core to produce a bunch of debug 75 messages to the system log. Select this if you are having a 76 problem with PCI support and want to see more of what is going on. 77 78 When in doubt, say N. 79 80config PCI_REALLOC_ENABLE_AUTO 81 bool "Enable PCI resource re-allocation detection" 82 depends on PCI_IOV 83 help 84 Say Y here if you want the PCI core to detect if PCI resource 85 re-allocation needs to be enabled. You can always use pci=realloc=on 86 or pci=realloc=off to override it. It will automatically 87 re-allocate PCI resources if SR-IOV BARs have not been allocated by 88 the BIOS. 89 90 When in doubt, say N. 91 92config PCI_STUB 93 tristate "PCI Stub driver" 94 help 95 Say Y or M here if you want be able to reserve a PCI device 96 when it is going to be assigned to a guest operating system. 97 98 When in doubt, say N. 99 100config PCI_PF_STUB 101 tristate "PCI PF Stub driver" 102 depends on PCI_IOV 103 help 104 Say Y or M here if you want to enable support for devices that 105 require SR-IOV support, while at the same time the PF (Physical 106 Function) itself is not providing any actual services on the 107 host itself such as storage or networking. 108 109 When in doubt, say N. 110 111config XEN_PCIDEV_FRONTEND 112 tristate "Xen PCI Frontend" 113 depends on XEN_PV 114 select PCI_XEN 115 select XEN_XENBUS_FRONTEND 116 default y 117 help 118 The PCI device frontend driver allows the kernel to import arbitrary 119 PCI devices from a PCI backend to support PCI driver domains. 120 121config PCI_ATS 122 bool 123 124config PCI_DOE 125 bool 126 127config PCI_ECAM 128 bool 129 130config PCI_LOCKLESS_CONFIG 131 bool 132 133config PCI_BRIDGE_EMUL 134 bool 135 136config PCI_IOV 137 bool "PCI IOV support" 138 select PCI_ATS 139 help 140 I/O Virtualization is a PCI feature supported by some devices 141 which allows them to create virtual devices which share their 142 physical resources. 143 144 If unsure, say N. 145 146config PCI_PRI 147 bool "PCI PRI support" 148 select PCI_ATS 149 help 150 PRI is the PCI Page Request Interface. It allows PCI devices that are 151 behind an IOMMU to recover from page faults. 152 153 If unsure, say N. 154 155config PCI_PASID 156 bool "PCI PASID support" 157 select PCI_ATS 158 help 159 Process Address Space Identifiers (PASIDs) can be used by PCI devices 160 to access more than one IO address space at the same time. To make 161 use of this feature an IOMMU is required which also supports PASIDs. 162 Select this option if you have such an IOMMU and want to compile the 163 driver for it into your kernel. 164 165 If unsure, say N. 166 167config PCI_P2PDMA 168 bool "PCI peer-to-peer transfer support" 169 depends on ZONE_DEVICE 170 # 171 # The need for the scatterlist DMA bus address flag means PCI P2PDMA 172 # requires 64bit 173 # 174 depends on 64BIT 175 select GENERIC_ALLOCATOR 176 select NEED_SG_DMA_FLAGS 177 help 178 Enables drivers to do PCI peer-to-peer transactions to and from 179 BARs that are exposed in other devices that are the part of 180 the hierarchy where peer-to-peer DMA is guaranteed by the PCI 181 specification to work (ie. anything below a single PCI bridge). 182 183 Many PCIe root complexes do not support P2P transactions and 184 it's hard to tell which support it at all, so at this time, 185 P2P DMA transactions must be between devices behind the same root 186 port. 187 188 If unsure, say N. 189 190config PCI_LABEL 191 def_bool y if (DMI || ACPI) 192 select NLS 193 194config PCI_HYPERV 195 tristate "Hyper-V PCI Frontend" 196 depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI && SYSFS 197 select PCI_HYPERV_INTERFACE 198 help 199 The PCI device frontend driver allows the kernel to import arbitrary 200 PCI devices from a PCI backend to support PCI driver domains. 201 202config PCI_DYNAMIC_OF_NODES 203 bool "Create Device tree nodes for PCI devices" 204 depends on OF_IRQ 205 select OF_DYNAMIC 206 help 207 This option enables support for generating device tree nodes for some 208 PCI devices. Thus, the driver of this kind can load and overlay 209 flattened device tree for its downstream devices. 210 211 Once this option is selected, the device tree nodes will be generated 212 for all PCI bridges. 213 214choice 215 prompt "PCI Express hierarchy optimization setting" 216 default PCIE_BUS_DEFAULT 217 depends on PCI && EXPERT 218 help 219 MPS (Max Payload Size) and MRRS (Max Read Request Size) are PCIe 220 device parameters that affect performance and the ability to 221 support hotplug and peer-to-peer DMA. 222 223 The following choices set the MPS and MRRS optimization strategy 224 at compile-time. The choices are the same as those offered for 225 the kernel command-line parameter 'pci', i.e., 226 'pci=pcie_bus_tune_off', 'pci=pcie_bus_safe', 227 'pci=pcie_bus_perf', and 'pci=pcie_bus_peer2peer'. 228 229 This is a compile-time setting and can be overridden by the above 230 command-line parameters. If unsure, choose PCIE_BUS_DEFAULT. 231 232config PCIE_BUS_TUNE_OFF 233 bool "Tune Off" 234 depends on PCI 235 help 236 Use the BIOS defaults; don't touch MPS at all. This is the same 237 as booting with 'pci=pcie_bus_tune_off'. 238 239config PCIE_BUS_DEFAULT 240 bool "Default" 241 depends on PCI 242 help 243 Default choice; ensure that the MPS matches upstream bridge. 244 245config PCIE_BUS_SAFE 246 bool "Safe" 247 depends on PCI 248 help 249 Use largest MPS that boot-time devices support. If you have a 250 closed system with no possibility of adding new devices, this 251 will use the largest MPS that's supported by all devices. This 252 is the same as booting with 'pci=pcie_bus_safe'. 253 254config PCIE_BUS_PERFORMANCE 255 bool "Performance" 256 depends on PCI 257 help 258 Use MPS and MRRS for best performance. Ensure that a given 259 device's MPS is no larger than its parent MPS, which allows us to 260 keep all switches/bridges to the max MPS supported by their 261 parent. This is the same as booting with 'pci=pcie_bus_perf'. 262 263config PCIE_BUS_PEER2PEER 264 bool "Peer2peer" 265 depends on PCI 266 help 267 Set MPS = 128 for all devices. MPS configuration effected by the 268 other options could cause the MPS on one root port to be 269 different than that of the MPS on another, which may cause 270 hot-added devices or peer-to-peer DMA to fail. Set MPS to the 271 smallest possible value (128B) system-wide to avoid these issues. 272 This is the same as booting with 'pci=pcie_bus_peer2peer'. 273 274endchoice 275 276config VGA_ARB 277 bool "VGA Arbitration" if EXPERT 278 default y 279 depends on (PCI && !S390) 280 help 281 Some "legacy" VGA devices implemented on PCI typically have the same 282 hard-decoded addresses as they did on ISA. When multiple PCI devices 283 are accessed at same time they need some kind of coordination. Please 284 see Documentation/gpu/vgaarbiter.rst for more details. Select this to 285 enable VGA arbiter. 286 287config VGA_ARB_MAX_GPUS 288 int "Maximum number of GPUs" 289 default 16 290 depends on VGA_ARB 291 help 292 Reserves space in the kernel to maintain resource locking for 293 multiple GPUS. The overhead for each GPU is very small. 294 295source "drivers/pci/hotplug/Kconfig" 296source "drivers/pci/controller/Kconfig" 297source "drivers/pci/endpoint/Kconfig" 298source "drivers/pci/switch/Kconfig" 299 300endif 301