xref: /linux/drivers/parport/parport_serial.c (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  * Support for common PCI multi-I/O cards (which is most of them)
3  *
4  * Copyright (C) 2001  Tim Waugh <twaugh@redhat.com>
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * as published by the Free Software Foundation; either version
9  * 2 of the License, or (at your option) any later version.
10  *
11  *
12  * Multi-function PCI cards are supposed to present separate logical
13  * devices on the bus.  A common thing to do seems to be to just use
14  * one logical device with lots of base address registers for both
15  * parallel ports and serial ports.  This driver is for dealing with
16  * that.
17  *
18  */
19 
20 #include <linux/types.h>
21 #include <linux/module.h>
22 #include <linux/init.h>
23 #include <linux/slab.h>
24 #include <linux/pci.h>
25 #include <linux/interrupt.h>
26 #include <linux/parport.h>
27 #include <linux/parport_pc.h>
28 #include <linux/8250_pci.h>
29 
30 enum parport_pc_pci_cards {
31 	titan_110l = 0,
32 	titan_210l,
33 	netmos_9xx5_combo,
34 	netmos_9855,
35 	netmos_9855_2p,
36 	netmos_9900,
37 	netmos_9900_2p,
38 	netmos_99xx_1p,
39 	avlab_1s1p,
40 	avlab_1s2p,
41 	avlab_2s1p,
42 	siig_1s1p_10x,
43 	siig_2s1p_10x,
44 	siig_2p1s_20x,
45 	siig_1s1p_20x,
46 	siig_2s1p_20x,
47 	timedia_4078a,
48 	timedia_4079h,
49 	timedia_4085h,
50 	timedia_4088a,
51 	timedia_4089a,
52 	timedia_4095a,
53 	timedia_4096a,
54 	timedia_4078u,
55 	timedia_4079a,
56 	timedia_4085u,
57 	timedia_4079r,
58 	timedia_4079s,
59 	timedia_4079d,
60 	timedia_4079e,
61 	timedia_4079f,
62 	timedia_9079a,
63 	timedia_9079b,
64 	timedia_9079c,
65 	wch_ch353_1s1p,
66 	wch_ch353_2s1p,
67 	wch_ch382_2s1p,
68 	sunix_2s1p,
69 };
70 
71 /* each element directly indexed from enum list, above */
72 struct parport_pc_pci {
73 	int numports;
74 	struct { /* BAR (base address registers) numbers in the config
75                     space header */
76 		int lo;
77 		int hi; /* -1 if not there, >6 for offset-method (max
78                            BAR is 6) */
79 	} addr[4];
80 
81 	/* If set, this is called immediately after pci_enable_device.
82 	 * If it returns non-zero, no probing will take place and the
83 	 * ports will not be used. */
84 	int (*preinit_hook) (struct pci_dev *pdev, struct parport_pc_pci *card,
85 				int autoirq, int autodma);
86 
87 	/* If set, this is called after probing for ports.  If 'failed'
88 	 * is non-zero we couldn't use any of the ports. */
89 	void (*postinit_hook) (struct pci_dev *pdev,
90 				struct parport_pc_pci *card, int failed);
91 };
92 
93 static int netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par,
94 				int autoirq, int autodma)
95 {
96 	/* the rule described below doesn't hold for this device */
97 	if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
98 			dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
99 			dev->subsystem_device == 0x0299)
100 		return -ENODEV;
101 
102 	if (dev->device == PCI_DEVICE_ID_NETMOS_9912) {
103 		par->numports = 1;
104 	} else {
105 		/*
106 		 * Netmos uses the subdevice ID to indicate the number of parallel
107 		 * and serial ports.  The form is 0x00PS, where <P> is the number of
108 		 * parallel ports and <S> is the number of serial ports.
109 		 */
110 		par->numports = (dev->subsystem_device & 0xf0) >> 4;
111 		if (par->numports > ARRAY_SIZE(par->addr))
112 			par->numports = ARRAY_SIZE(par->addr);
113 	}
114 
115 	return 0;
116 }
117 
118 static struct parport_pc_pci cards[] = {
119 	/* titan_110l */		{ 1, { { 3, -1 }, } },
120 	/* titan_210l */		{ 1, { { 3, -1 }, } },
121 	/* netmos_9xx5_combo */		{ 1, { { 2, -1 }, }, netmos_parallel_init },
122 	/* netmos_9855 */		{ 1, { { 0, -1 }, }, netmos_parallel_init },
123 	/* netmos_9855_2p */		{ 2, { { 0, -1 }, { 2, -1 }, } },
124 	/* netmos_9900 */		{1, { { 3, 4 }, }, netmos_parallel_init },
125 	/* netmos_9900_2p */		{2, { { 0, 1 }, { 3, 4 }, } },
126 	/* netmos_99xx_1p */		{1, { { 0, 1 }, } },
127 	/* avlab_1s1p     */		{ 1, { { 1, 2}, } },
128 	/* avlab_1s2p     */		{ 2, { { 1, 2}, { 3, 4 },} },
129 	/* avlab_2s1p     */		{ 1, { { 2, 3}, } },
130 	/* siig_1s1p_10x */		{ 1, { { 3, 4 }, } },
131 	/* siig_2s1p_10x */		{ 1, { { 4, 5 }, } },
132 	/* siig_2p1s_20x */		{ 2, { { 1, 2 }, { 3, 4 }, } },
133 	/* siig_1s1p_20x */		{ 1, { { 1, 2 }, } },
134 	/* siig_2s1p_20x */		{ 1, { { 2, 3 }, } },
135 	/* timedia_4078a */		{ 1, { { 2, -1 }, } },
136 	/* timedia_4079h */             { 1, { { 2, 3 }, } },
137 	/* timedia_4085h */             { 2, { { 2, -1 }, { 4, -1 }, } },
138 	/* timedia_4088a */             { 2, { { 2, 3 }, { 4, 5 }, } },
139 	/* timedia_4089a */             { 2, { { 2, 3 }, { 4, 5 }, } },
140 	/* timedia_4095a */             { 2, { { 2, 3 }, { 4, 5 }, } },
141 	/* timedia_4096a */             { 2, { { 2, 3 }, { 4, 5 }, } },
142 	/* timedia_4078u */             { 1, { { 2, -1 }, } },
143 	/* timedia_4079a */             { 1, { { 2, 3 }, } },
144 	/* timedia_4085u */             { 2, { { 2, -1 }, { 4, -1 }, } },
145 	/* timedia_4079r */             { 1, { { 2, 3 }, } },
146 	/* timedia_4079s */             { 1, { { 2, 3 }, } },
147 	/* timedia_4079d */             { 1, { { 2, 3 }, } },
148 	/* timedia_4079e */             { 1, { { 2, 3 }, } },
149 	/* timedia_4079f */             { 1, { { 2, 3 }, } },
150 	/* timedia_9079a */             { 1, { { 2, 3 }, } },
151 	/* timedia_9079b */             { 1, { { 2, 3 }, } },
152 	/* timedia_9079c */             { 1, { { 2, 3 }, } },
153 	/* wch_ch353_1s1p*/             { 1, { { 1, -1}, } },
154 	/* wch_ch353_2s1p*/             { 1, { { 2, -1}, } },
155 	/* wch_ch382_2s1p*/             { 1, { { 2, -1}, } },
156 	/* sunix_2s1p */                { 1, { { 3, -1 }, } },
157 };
158 
159 #define PCI_VENDOR_ID_SUNIX		0x1fd4
160 #define PCI_DEVICE_ID_SUNIX_1999	0x1999
161 
162 static struct pci_device_id parport_serial_pci_tbl[] = {
163 	/* PCI cards */
164 	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
165 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l },
166 	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L,
167 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l },
168 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9735,
169 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
170 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9745,
171 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
172 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
173 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
174 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845,
175 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
176 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
177 	  0x1000, 0x0020, 0, 0, netmos_9855_2p },
178 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
179 	  0x1000, 0x0022, 0, 0, netmos_9855_2p },
180 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
181 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
182 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
183 	  0xA000, 0x3011, 0, 0, netmos_9900 },
184 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
185 	  0xA000, 0x3012, 0, 0, netmos_9900 },
186 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
187 	  0xA000, 0x3020, 0, 0, netmos_9900_2p },
188 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
189 	  0xA000, 0x2000, 0, 0, netmos_99xx_1p },
190 	/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
191 	{ PCI_VENDOR_ID_AFAVLAB, 0x2110,
192 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
193 	{ PCI_VENDOR_ID_AFAVLAB, 0x2111,
194 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
195 	{ PCI_VENDOR_ID_AFAVLAB, 0x2112,
196 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
197 	{ PCI_VENDOR_ID_AFAVLAB, 0x2140,
198 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
199 	{ PCI_VENDOR_ID_AFAVLAB, 0x2141,
200 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
201 	{ PCI_VENDOR_ID_AFAVLAB, 0x2142,
202 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
203 	{ PCI_VENDOR_ID_AFAVLAB, 0x2160,
204 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
205 	{ PCI_VENDOR_ID_AFAVLAB, 0x2161,
206 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
207 	{ PCI_VENDOR_ID_AFAVLAB, 0x2162,
208 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
209 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
210 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
211 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
212 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
213 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
214 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
215 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
216 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
217 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
218 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
219 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
220 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
221 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
222 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
223 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
224 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
225 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
226 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
227 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
228 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
229 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
230 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
231 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
232 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
233 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
234 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
235 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
236 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
237 	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
238 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
239 	/* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
240 	{ 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
241 	{ 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
242 	{ 0x1409, 0x7168, 0x1409, 0x4085, 0, 0, timedia_4085h },
243 	{ 0x1409, 0x7168, 0x1409, 0x4088, 0, 0, timedia_4088a },
244 	{ 0x1409, 0x7168, 0x1409, 0x4089, 0, 0, timedia_4089a },
245 	{ 0x1409, 0x7168, 0x1409, 0x4095, 0, 0, timedia_4095a },
246 	{ 0x1409, 0x7168, 0x1409, 0x4096, 0, 0, timedia_4096a },
247 	{ 0x1409, 0x7168, 0x1409, 0x5078, 0, 0, timedia_4078u },
248 	{ 0x1409, 0x7168, 0x1409, 0x5079, 0, 0, timedia_4079a },
249 	{ 0x1409, 0x7168, 0x1409, 0x5085, 0, 0, timedia_4085u },
250 	{ 0x1409, 0x7168, 0x1409, 0x6079, 0, 0, timedia_4079r },
251 	{ 0x1409, 0x7168, 0x1409, 0x7079, 0, 0, timedia_4079s },
252 	{ 0x1409, 0x7168, 0x1409, 0x8079, 0, 0, timedia_4079d },
253 	{ 0x1409, 0x7168, 0x1409, 0x9079, 0, 0, timedia_4079e },
254 	{ 0x1409, 0x7168, 0x1409, 0xa079, 0, 0, timedia_4079f },
255 	{ 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
256 	{ 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
257 	{ 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
258 
259 	/* WCH CARDS */
260 	{ 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p},
261 	{ 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
262 	{ 0x1c00, 0x3250, 0x1c00, 0x3250, 0, 0, wch_ch382_2s1p},
263 
264 	/*
265 	 * More SUNIX variations. At least one of these has part number
266 	 * '5079A but subdevice 0x102. That board reports 0x0708 as
267 	 * its PCI Class.
268 	 */
269 	{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, PCI_VENDOR_ID_SUNIX,
270 	  0x0102, 0, 0, sunix_2s1p },
271 
272 	{ 0, } /* terminate list */
273 };
274 MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
275 
276 /*
277  * This table describes the serial "geometry" of these boards.  Any
278  * quirks for these can be found in drivers/serial/8250_pci.c
279  *
280  * Cards not tested are marked n/t
281  * If you have one of these cards and it works for you, please tell me..
282  */
283 static struct pciserial_board pci_parport_serial_boards[] = {
284 	[titan_110l] = {
285 		.flags		= FL_BASE1 | FL_BASE_BARS,
286 		.num_ports	= 1,
287 		.base_baud	= 921600,
288 		.uart_offset	= 8,
289 	},
290 	[titan_210l] = {
291 		.flags		= FL_BASE1 | FL_BASE_BARS,
292 		.num_ports	= 2,
293 		.base_baud	= 921600,
294 		.uart_offset	= 8,
295 	},
296 	[netmos_9xx5_combo] = {
297 		.flags		= FL_BASE0 | FL_BASE_BARS,
298 		.num_ports	= 1,
299 		.base_baud	= 115200,
300 		.uart_offset	= 8,
301 	},
302 	[netmos_9855] = {
303 		.flags		= FL_BASE2 | FL_BASE_BARS,
304 		.num_ports	= 1,
305 		.base_baud	= 115200,
306 		.uart_offset	= 8,
307 	},
308 	[netmos_9855_2p] = {
309 		.flags		= FL_BASE4 | FL_BASE_BARS,
310 		.num_ports	= 1,
311 		.base_baud	= 115200,
312 		.uart_offset	= 8,
313 	},
314 	[netmos_9900] = { /* n/t */
315 		.flags		= FL_BASE0 | FL_BASE_BARS,
316 		.num_ports	= 1,
317 		.base_baud	= 115200,
318 		.uart_offset	= 8,
319 	},
320 	[netmos_9900_2p] = { /* parallel only */ /* n/t */
321 		.flags		= FL_BASE0,
322 		.num_ports	= 0,
323 		.base_baud	= 115200,
324 		.uart_offset	= 8,
325 	},
326 	[netmos_99xx_1p] = { /* parallel only */ /* n/t */
327 		.flags		= FL_BASE0,
328 		.num_ports	= 0,
329 		.base_baud	= 115200,
330 		.uart_offset	= 8,
331 	},
332 	[avlab_1s1p] = { /* n/t */
333 		.flags		= FL_BASE0 | FL_BASE_BARS,
334 		.num_ports	= 1,
335 		.base_baud	= 115200,
336 		.uart_offset	= 8,
337 	},
338 	[avlab_1s2p] = { /* n/t */
339 		.flags		= FL_BASE0 | FL_BASE_BARS,
340 		.num_ports	= 1,
341 		.base_baud	= 115200,
342 		.uart_offset	= 8,
343 	},
344 	[avlab_2s1p] = { /* n/t */
345 		.flags		= FL_BASE0 | FL_BASE_BARS,
346 		.num_ports	= 2,
347 		.base_baud	= 115200,
348 		.uart_offset	= 8,
349 	},
350 	[siig_1s1p_10x] = {
351 		.flags		= FL_BASE2,
352 		.num_ports	= 1,
353 		.base_baud	= 460800,
354 		.uart_offset	= 8,
355 	},
356 	[siig_2s1p_10x] = {
357 		.flags		= FL_BASE2,
358 		.num_ports	= 1,
359 		.base_baud	= 921600,
360 		.uart_offset	= 8,
361 	},
362 	[siig_2p1s_20x] = {
363 		.flags		= FL_BASE0,
364 		.num_ports	= 1,
365 		.base_baud	= 921600,
366 		.uart_offset	= 8,
367 	},
368 	[siig_1s1p_20x] = {
369 		.flags		= FL_BASE0,
370 		.num_ports	= 1,
371 		.base_baud	= 921600,
372 		.uart_offset	= 8,
373 	},
374 	[siig_2s1p_20x] = {
375 		.flags		= FL_BASE0,
376 		.num_ports	= 1,
377 		.base_baud	= 921600,
378 		.uart_offset	= 8,
379 	},
380 	[timedia_4078a] = {
381 		.flags		= FL_BASE0|FL_BASE_BARS,
382 		.num_ports	= 1,
383 		.base_baud	= 921600,
384 		.uart_offset	= 8,
385 	},
386 	[timedia_4079h] = {
387 		.flags		= FL_BASE0|FL_BASE_BARS,
388 		.num_ports	= 1,
389 		.base_baud	= 921600,
390 		.uart_offset	= 8,
391 	},
392 	[timedia_4085h] = {
393 		.flags		= FL_BASE0|FL_BASE_BARS,
394 		.num_ports	= 1,
395 		.base_baud	= 921600,
396 		.uart_offset	= 8,
397 	},
398 	[timedia_4088a] = {
399 		.flags		= FL_BASE0|FL_BASE_BARS,
400 		.num_ports	= 1,
401 		.base_baud	= 921600,
402 		.uart_offset	= 8,
403 	},
404 	[timedia_4089a] = {
405 		.flags		= FL_BASE0|FL_BASE_BARS,
406 		.num_ports	= 1,
407 		.base_baud	= 921600,
408 		.uart_offset	= 8,
409 	},
410 	[timedia_4095a] = {
411 		.flags		= FL_BASE0|FL_BASE_BARS,
412 		.num_ports	= 1,
413 		.base_baud	= 921600,
414 		.uart_offset	= 8,
415 	},
416 	[timedia_4096a] = {
417 		.flags		= FL_BASE0|FL_BASE_BARS,
418 		.num_ports	= 1,
419 		.base_baud	= 921600,
420 		.uart_offset	= 8,
421 	},
422 	[timedia_4078u] = {
423 		.flags		= FL_BASE0|FL_BASE_BARS,
424 		.num_ports	= 1,
425 		.base_baud	= 921600,
426 		.uart_offset	= 8,
427 	},
428 	[timedia_4079a] = {
429 		.flags		= FL_BASE0|FL_BASE_BARS,
430 		.num_ports	= 1,
431 		.base_baud	= 921600,
432 		.uart_offset	= 8,
433 	},
434 	[timedia_4085u] = {
435 		.flags		= FL_BASE0|FL_BASE_BARS,
436 		.num_ports	= 1,
437 		.base_baud	= 921600,
438 		.uart_offset	= 8,
439 	},
440 	[timedia_4079r] = {
441 		.flags		= FL_BASE0|FL_BASE_BARS,
442 		.num_ports	= 1,
443 		.base_baud	= 921600,
444 		.uart_offset	= 8,
445 	},
446 	[timedia_4079s] = {
447 		.flags		= FL_BASE0|FL_BASE_BARS,
448 		.num_ports	= 1,
449 		.base_baud	= 921600,
450 		.uart_offset	= 8,
451 	},
452 	[timedia_4079d] = {
453 		.flags		= FL_BASE0|FL_BASE_BARS,
454 		.num_ports	= 1,
455 		.base_baud	= 921600,
456 		.uart_offset	= 8,
457 	},
458 	[timedia_4079e] = {
459 		.flags		= FL_BASE0|FL_BASE_BARS,
460 		.num_ports	= 1,
461 		.base_baud	= 921600,
462 		.uart_offset	= 8,
463 	},
464 	[timedia_4079f] = {
465 		.flags		= FL_BASE0|FL_BASE_BARS,
466 		.num_ports	= 1,
467 		.base_baud	= 921600,
468 		.uart_offset	= 8,
469 	},
470 	[timedia_9079a] = {
471 		.flags		= FL_BASE0|FL_BASE_BARS,
472 		.num_ports	= 1,
473 		.base_baud	= 921600,
474 		.uart_offset	= 8,
475 	},
476 	[timedia_9079b] = {
477 		.flags		= FL_BASE0|FL_BASE_BARS,
478 		.num_ports	= 1,
479 		.base_baud	= 921600,
480 		.uart_offset	= 8,
481 	},
482 	[timedia_9079c] = {
483 		.flags		= FL_BASE0|FL_BASE_BARS,
484 		.num_ports	= 1,
485 		.base_baud	= 921600,
486 		.uart_offset	= 8,
487 	},
488 	[wch_ch353_1s1p] = {
489 		.flags          = FL_BASE0|FL_BASE_BARS,
490 		.num_ports      = 1,
491 		.base_baud      = 115200,
492 		.uart_offset    = 8,
493 	},
494 	[wch_ch353_2s1p] = {
495 		.flags          = FL_BASE0|FL_BASE_BARS,
496 		.num_ports      = 2,
497 		.base_baud      = 115200,
498 		.uart_offset    = 8,
499 	},
500 	[wch_ch382_2s1p] = {
501 		.flags          = FL_BASE0,
502 		.num_ports      = 2,
503 		.base_baud      = 115200,
504 		.uart_offset    = 8,
505 		.first_offset   = 0xC0,
506 	},
507 	[sunix_2s1p] = {
508 		.flags		= FL_BASE0|FL_BASE_BARS,
509 		.num_ports	= 2,
510 		.base_baud	= 921600,
511 		.uart_offset	= 8,
512 	},
513 };
514 
515 struct parport_serial_private {
516 	struct serial_private	*serial;
517 	int num_par;
518 	struct parport *port[PARPORT_MAX];
519 	struct parport_pc_pci par;
520 };
521 
522 /* Register the serial port(s) of a PCI card. */
523 static int serial_register(struct pci_dev *dev, const struct pci_device_id *id)
524 {
525 	struct parport_serial_private *priv = pci_get_drvdata (dev);
526 	struct pciserial_board *board;
527 	struct serial_private *serial;
528 
529 	board = &pci_parport_serial_boards[id->driver_data];
530 
531 	if (board->num_ports == 0)
532 		return 0;
533 
534 	serial = pciserial_init_ports(dev, board);
535 
536 	if (IS_ERR(serial))
537 		return PTR_ERR(serial);
538 
539 	priv->serial = serial;
540 	return 0;
541 }
542 
543 /* Register the parallel port(s) of a PCI card. */
544 static int parport_register(struct pci_dev *dev, const struct pci_device_id *id)
545 {
546 	struct parport_pc_pci *card;
547 	struct parport_serial_private *priv = pci_get_drvdata (dev);
548 	int n, success = 0;
549 
550 	priv->par = cards[id->driver_data];
551 	card = &priv->par;
552 	if (card->preinit_hook &&
553 	    card->preinit_hook (dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
554 		return -ENODEV;
555 
556 	for (n = 0; n < card->numports; n++) {
557 		struct parport *port;
558 		int lo = card->addr[n].lo;
559 		int hi = card->addr[n].hi;
560 		unsigned long io_lo, io_hi;
561 		int irq;
562 
563 		if (priv->num_par == ARRAY_SIZE (priv->port)) {
564 			printk (KERN_WARNING
565 				"parport_serial: %s: only %zu parallel ports "
566 				"supported (%d reported)\n", pci_name (dev),
567 				ARRAY_SIZE(priv->port), card->numports);
568 			break;
569 		}
570 
571 		io_lo = pci_resource_start (dev, lo);
572 		io_hi = 0;
573 		if ((hi >= 0) && (hi <= 6))
574 			io_hi = pci_resource_start (dev, hi);
575 		else if (hi > 6)
576 			io_lo += hi; /* Reinterpret the meaning of
577                                         "hi" as an offset (see SYBA
578                                         def.) */
579 		/* TODO: test if sharing interrupts works */
580 		irq = dev->irq;
581 		if (irq == IRQ_NONE) {
582 			dev_dbg(&dev->dev,
583 			"PCI parallel port detected: I/O at %#lx(%#lx)\n",
584 				io_lo, io_hi);
585 			irq = PARPORT_IRQ_NONE;
586 		} else {
587 			dev_dbg(&dev->dev,
588 		"PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n",
589 				io_lo, io_hi, irq);
590 		}
591 		port = parport_pc_probe_port (io_lo, io_hi, irq,
592 			      PARPORT_DMA_NONE, &dev->dev, IRQF_SHARED);
593 		if (port) {
594 			priv->port[priv->num_par++] = port;
595 			success = 1;
596 		}
597 	}
598 
599 	if (card->postinit_hook)
600 		card->postinit_hook (dev, card, !success);
601 
602 	return 0;
603 }
604 
605 static int parport_serial_pci_probe(struct pci_dev *dev,
606 				    const struct pci_device_id *id)
607 {
608 	struct parport_serial_private *priv;
609 	int err;
610 
611 	priv = kzalloc (sizeof *priv, GFP_KERNEL);
612 	if (!priv)
613 		return -ENOMEM;
614 	pci_set_drvdata (dev, priv);
615 
616 	err = pci_enable_device (dev);
617 	if (err) {
618 		kfree (priv);
619 		return err;
620 	}
621 
622 	if (parport_register (dev, id)) {
623 		kfree (priv);
624 		return -ENODEV;
625 	}
626 
627 	if (serial_register (dev, id)) {
628 		int i;
629 		for (i = 0; i < priv->num_par; i++)
630 			parport_pc_unregister_port (priv->port[i]);
631 		kfree (priv);
632 		return -ENODEV;
633 	}
634 
635 	return 0;
636 }
637 
638 static void parport_serial_pci_remove(struct pci_dev *dev)
639 {
640 	struct parport_serial_private *priv = pci_get_drvdata (dev);
641 	int i;
642 
643 	// Serial ports
644 	if (priv->serial)
645 		pciserial_remove_ports(priv->serial);
646 
647 	// Parallel ports
648 	for (i = 0; i < priv->num_par; i++)
649 		parport_pc_unregister_port (priv->port[i]);
650 
651 	kfree (priv);
652 	return;
653 }
654 
655 #ifdef CONFIG_PM
656 static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state)
657 {
658 	struct parport_serial_private *priv = pci_get_drvdata(dev);
659 
660 	if (priv->serial)
661 		pciserial_suspend_ports(priv->serial);
662 
663 	/* FIXME: What about parport? */
664 
665 	pci_save_state(dev);
666 	pci_set_power_state(dev, pci_choose_state(dev, state));
667 	return 0;
668 }
669 
670 static int parport_serial_pci_resume(struct pci_dev *dev)
671 {
672 	struct parport_serial_private *priv = pci_get_drvdata(dev);
673 	int err;
674 
675 	pci_set_power_state(dev, PCI_D0);
676 	pci_restore_state(dev);
677 
678 	/*
679 	 * The device may have been disabled.  Re-enable it.
680 	 */
681 	err = pci_enable_device(dev);
682 	if (err) {
683 		printk(KERN_ERR "parport_serial: %s: error enabling "
684 			"device for resume (%d)\n", pci_name(dev), err);
685 		return err;
686 	}
687 
688 	if (priv->serial)
689 		pciserial_resume_ports(priv->serial);
690 
691 	/* FIXME: What about parport? */
692 
693 	return 0;
694 }
695 #endif
696 
697 static struct pci_driver parport_serial_pci_driver = {
698 	.name		= "parport_serial",
699 	.id_table	= parport_serial_pci_tbl,
700 	.probe		= parport_serial_pci_probe,
701 	.remove		= parport_serial_pci_remove,
702 #ifdef CONFIG_PM
703 	.suspend	= parport_serial_pci_suspend,
704 	.resume		= parport_serial_pci_resume,
705 #endif
706 };
707 
708 
709 static int __init parport_serial_init (void)
710 {
711 	return pci_register_driver (&parport_serial_pci_driver);
712 }
713 
714 static void __exit parport_serial_exit (void)
715 {
716 	pci_unregister_driver (&parport_serial_pci_driver);
717 	return;
718 }
719 
720 MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>");
721 MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards");
722 MODULE_LICENSE("GPL");
723 
724 module_init(parport_serial_init);
725 module_exit(parport_serial_exit);
726