1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Device tree based initialization code for reserved memory. 4 * 5 * Copyright (c) 2013, 2015 The Linux Foundation. All Rights Reserved. 6 * Copyright (c) 2013,2014 Samsung Electronics Co., Ltd. 7 * http://www.samsung.com 8 * Author: Marek Szyprowski <m.szyprowski@samsung.com> 9 * Author: Josh Cartwright <joshc@codeaurora.org> 10 */ 11 12 #define pr_fmt(fmt) "OF: reserved mem: " fmt 13 14 #include <linux/err.h> 15 #include <linux/ioport.h> 16 #include <linux/libfdt.h> 17 #include <linux/of.h> 18 #include <linux/of_fdt.h> 19 #include <linux/of_platform.h> 20 #include <linux/mm.h> 21 #include <linux/sizes.h> 22 #include <linux/of_reserved_mem.h> 23 #include <linux/sort.h> 24 #include <linux/slab.h> 25 #include <linux/memblock.h> 26 #include <linux/kmemleak.h> 27 #include <linux/cma.h> 28 #include <linux/dma-map-ops.h> 29 30 #include "of_private.h" 31 32 static struct reserved_mem reserved_mem_array[MAX_RESERVED_REGIONS] __initdata; 33 static struct reserved_mem *reserved_mem __refdata = reserved_mem_array; 34 static int total_reserved_mem_cnt = MAX_RESERVED_REGIONS; 35 static int reserved_mem_count; 36 37 static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size, 38 phys_addr_t align, phys_addr_t start, phys_addr_t end, bool nomap, 39 phys_addr_t *res_base) 40 { 41 phys_addr_t base; 42 int err = 0; 43 44 end = !end ? MEMBLOCK_ALLOC_ANYWHERE : end; 45 align = !align ? SMP_CACHE_BYTES : align; 46 base = memblock_phys_alloc_range(size, align, start, end); 47 if (!base) 48 return -ENOMEM; 49 50 *res_base = base; 51 if (nomap) { 52 err = memblock_mark_nomap(base, size); 53 if (err) 54 memblock_phys_free(base, size); 55 } 56 57 if (!err) 58 kmemleak_ignore_phys(base); 59 60 return err; 61 } 62 63 /* 64 * alloc_reserved_mem_array() - allocate memory for the reserved_mem 65 * array using memblock 66 * 67 * This function is used to allocate memory for the reserved_mem 68 * array according to the total number of reserved memory regions 69 * defined in the DT. 70 * After the new array is allocated, the information stored in 71 * the initial static array is copied over to this new array and 72 * the new array is used from this point on. 73 */ 74 static void __init alloc_reserved_mem_array(void) 75 { 76 struct reserved_mem *new_array; 77 size_t alloc_size, copy_size, memset_size; 78 79 alloc_size = array_size(total_reserved_mem_cnt, sizeof(*new_array)); 80 if (alloc_size == SIZE_MAX) { 81 pr_err("Failed to allocate memory for reserved_mem array with err: %d", -EOVERFLOW); 82 return; 83 } 84 85 new_array = memblock_alloc(alloc_size, SMP_CACHE_BYTES); 86 if (!new_array) { 87 pr_err("Failed to allocate memory for reserved_mem array with err: %d", -ENOMEM); 88 return; 89 } 90 91 copy_size = array_size(reserved_mem_count, sizeof(*new_array)); 92 if (copy_size == SIZE_MAX) { 93 memblock_free(new_array, alloc_size); 94 total_reserved_mem_cnt = MAX_RESERVED_REGIONS; 95 pr_err("Failed to allocate memory for reserved_mem array with err: %d", -EOVERFLOW); 96 return; 97 } 98 99 memset_size = alloc_size - copy_size; 100 101 memcpy(new_array, reserved_mem, copy_size); 102 memset(new_array + reserved_mem_count, 0, memset_size); 103 104 reserved_mem = new_array; 105 } 106 107 static void __init fdt_init_reserved_mem_node(struct reserved_mem *rmem); 108 /* 109 * fdt_reserved_mem_save_node() - save fdt node for second pass initialization 110 */ 111 static void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname, 112 phys_addr_t base, phys_addr_t size) 113 { 114 struct reserved_mem *rmem = &reserved_mem[reserved_mem_count]; 115 116 if (reserved_mem_count == total_reserved_mem_cnt) { 117 pr_err("not enough space for all defined regions.\n"); 118 return; 119 } 120 121 rmem->fdt_node = node; 122 rmem->name = uname; 123 rmem->base = base; 124 rmem->size = size; 125 126 /* Call the region specific initialization function */ 127 fdt_init_reserved_mem_node(rmem); 128 129 reserved_mem_count++; 130 } 131 132 static int __init early_init_dt_reserve_memory(phys_addr_t base, 133 phys_addr_t size, bool nomap) 134 { 135 if (nomap) { 136 /* 137 * If the memory is already reserved (by another region), we 138 * should not allow it to be marked nomap, but don't worry 139 * if the region isn't memory as it won't be mapped. 140 */ 141 if (memblock_overlaps_region(&memblock.memory, base, size) && 142 memblock_is_region_reserved(base, size)) 143 return -EBUSY; 144 145 return memblock_mark_nomap(base, size); 146 } 147 return memblock_reserve(base, size); 148 } 149 150 /* 151 * __reserved_mem_reserve_reg() - reserve all memory described in 'reg' property 152 */ 153 static int __init __reserved_mem_reserve_reg(unsigned long node, 154 const char *uname) 155 { 156 phys_addr_t base, size; 157 int i, len; 158 const __be32 *prop; 159 bool nomap, default_cma; 160 161 prop = of_flat_dt_get_addr_size_prop(node, "reg", &len); 162 if (!prop) 163 return -ENOENT; 164 165 nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL; 166 default_cma = of_get_flat_dt_prop(node, "linux,cma-default", NULL); 167 168 if (default_cma && cma_skip_dt_default_reserved_mem()) { 169 pr_err("Skipping dt linux,cma-default for \"cma=\" kernel param.\n"); 170 return -EINVAL; 171 } 172 173 for (i = 0; i < len; i++) { 174 u64 b, s; 175 176 of_flat_dt_read_addr_size(prop, i, &b, &s); 177 178 base = b; 179 size = s; 180 181 if (size && early_init_dt_reserve_memory(base, size, nomap) == 0) { 182 /* Architecture specific contiguous memory fixup. */ 183 if (of_flat_dt_is_compatible(node, "shared-dma-pool") && 184 of_get_flat_dt_prop(node, "reusable", NULL)) 185 dma_contiguous_early_fixup(base, size); 186 pr_debug("Reserved memory: reserved region for node '%s': base %pa, size %lu MiB\n", 187 uname, &base, (unsigned long)(size / SZ_1M)); 188 } else { 189 pr_err("Reserved memory: failed to reserve memory for node '%s': base %pa, size %lu MiB\n", 190 uname, &base, (unsigned long)(size / SZ_1M)); 191 } 192 } 193 return 0; 194 } 195 196 /* 197 * __reserved_mem_check_root() - check if #size-cells, #address-cells provided 198 * in /reserved-memory matches the values supported by the current implementation, 199 * also check if ranges property has been provided 200 */ 201 static int __init __reserved_mem_check_root(unsigned long node) 202 { 203 const __be32 *prop; 204 205 prop = of_get_flat_dt_prop(node, "#size-cells", NULL); 206 if (!prop || be32_to_cpup(prop) != dt_root_size_cells) 207 return -EINVAL; 208 209 prop = of_get_flat_dt_prop(node, "#address-cells", NULL); 210 if (!prop || be32_to_cpup(prop) != dt_root_addr_cells) 211 return -EINVAL; 212 213 prop = of_get_flat_dt_prop(node, "ranges", NULL); 214 if (!prop) 215 return -EINVAL; 216 return 0; 217 } 218 219 static void __init __rmem_check_for_overlap(void); 220 221 /** 222 * fdt_scan_reserved_mem_reg_nodes() - Store info for the "reg" defined 223 * reserved memory regions. 224 * 225 * This function is used to scan through the DT and store the 226 * information for the reserved memory regions that are defined using 227 * the "reg" property. The region node number, name, base address, and 228 * size are all stored in the reserved_mem array by calling the 229 * fdt_reserved_mem_save_node() function. 230 */ 231 void __init fdt_scan_reserved_mem_reg_nodes(void) 232 { 233 const void *fdt = initial_boot_params; 234 phys_addr_t base, size; 235 int node, child; 236 237 if (!fdt) 238 return; 239 240 node = fdt_path_offset(fdt, "/reserved-memory"); 241 if (node < 0) { 242 pr_info("Reserved memory: No reserved-memory node in the DT\n"); 243 return; 244 } 245 246 /* Attempt dynamic allocation of a new reserved_mem array */ 247 alloc_reserved_mem_array(); 248 249 if (__reserved_mem_check_root(node)) { 250 pr_err("Reserved memory: unsupported node format, ignoring\n"); 251 return; 252 } 253 254 fdt_for_each_subnode(child, fdt, node) { 255 const char *uname; 256 bool default_cma = of_get_flat_dt_prop(child, "linux,cma-default", NULL); 257 u64 b, s; 258 259 if (!of_fdt_device_is_available(fdt, child)) 260 continue; 261 if (default_cma && cma_skip_dt_default_reserved_mem()) 262 continue; 263 264 if (!of_flat_dt_get_addr_size(child, "reg", &b, &s)) 265 continue; 266 267 base = b; 268 size = s; 269 270 if (size) { 271 uname = fdt_get_name(fdt, child, NULL); 272 fdt_reserved_mem_save_node(child, uname, base, size); 273 } 274 } 275 276 /* check for overlapping reserved regions */ 277 __rmem_check_for_overlap(); 278 } 279 280 static int __init __reserved_mem_alloc_size(unsigned long node, const char *uname); 281 282 /* 283 * fdt_scan_reserved_mem() - scan a single FDT node for reserved memory 284 */ 285 int __init fdt_scan_reserved_mem(void) 286 { 287 int node, child; 288 int dynamic_nodes_cnt = 0, count = 0; 289 int dynamic_nodes[MAX_RESERVED_REGIONS]; 290 const void *fdt = initial_boot_params; 291 292 node = fdt_path_offset(fdt, "/reserved-memory"); 293 if (node < 0) 294 return -ENODEV; 295 296 if (__reserved_mem_check_root(node) != 0) { 297 pr_err("Reserved memory: unsupported node format, ignoring\n"); 298 return -EINVAL; 299 } 300 301 fdt_for_each_subnode(child, fdt, node) { 302 const char *uname; 303 int err; 304 305 if (!of_fdt_device_is_available(fdt, child)) 306 continue; 307 308 uname = fdt_get_name(fdt, child, NULL); 309 310 err = __reserved_mem_reserve_reg(child, uname); 311 if (!err) 312 count++; 313 /* 314 * Save the nodes for the dynamically-placed regions 315 * into an array which will be used for allocation right 316 * after all the statically-placed regions are reserved 317 * or marked as no-map. This is done to avoid dynamically 318 * allocating from one of the statically-placed regions. 319 */ 320 if (err == -ENOENT && of_get_flat_dt_prop(child, "size", NULL)) { 321 dynamic_nodes[dynamic_nodes_cnt] = child; 322 dynamic_nodes_cnt++; 323 } 324 } 325 for (int i = 0; i < dynamic_nodes_cnt; i++) { 326 const char *uname; 327 int err; 328 329 child = dynamic_nodes[i]; 330 uname = fdt_get_name(fdt, child, NULL); 331 err = __reserved_mem_alloc_size(child, uname); 332 if (!err) 333 count++; 334 } 335 total_reserved_mem_cnt = count; 336 return 0; 337 } 338 339 /* 340 * __reserved_mem_alloc_in_range() - allocate reserved memory described with 341 * 'alloc-ranges'. Choose bottom-up/top-down depending on nearby existing 342 * reserved regions to keep the reserved memory contiguous if possible. 343 */ 344 static int __init __reserved_mem_alloc_in_range(phys_addr_t size, 345 phys_addr_t align, phys_addr_t start, phys_addr_t end, bool nomap, 346 phys_addr_t *res_base) 347 { 348 bool prev_bottom_up = memblock_bottom_up(); 349 bool bottom_up = false, top_down = false; 350 int ret, i; 351 352 for (i = 0; i < reserved_mem_count; i++) { 353 struct reserved_mem *rmem = &reserved_mem[i]; 354 355 /* Skip regions that were not reserved yet */ 356 if (rmem->size == 0) 357 continue; 358 359 /* 360 * If range starts next to an existing reservation, use bottom-up: 361 * |....RRRR................RRRRRRRR..............| 362 * --RRRR------ 363 */ 364 if (start >= rmem->base && start <= (rmem->base + rmem->size)) 365 bottom_up = true; 366 367 /* 368 * If range ends next to an existing reservation, use top-down: 369 * |....RRRR................RRRRRRRR..............| 370 * -------RRRR----- 371 */ 372 if (end >= rmem->base && end <= (rmem->base + rmem->size)) 373 top_down = true; 374 } 375 376 /* Change setting only if either bottom-up or top-down was selected */ 377 if (bottom_up != top_down) 378 memblock_set_bottom_up(bottom_up); 379 380 ret = early_init_dt_alloc_reserved_memory_arch(size, align, 381 start, end, nomap, res_base); 382 383 /* Restore old setting if needed */ 384 if (bottom_up != top_down) 385 memblock_set_bottom_up(prev_bottom_up); 386 387 return ret; 388 } 389 390 /* 391 * __reserved_mem_alloc_size() - allocate reserved memory described by 392 * 'size', 'alignment' and 'alloc-ranges' properties. 393 */ 394 static int __init __reserved_mem_alloc_size(unsigned long node, const char *uname) 395 { 396 phys_addr_t start = 0, end = 0; 397 phys_addr_t base = 0, align = 0, size; 398 int i, len; 399 const __be32 *prop; 400 bool nomap, default_cma; 401 int ret; 402 403 prop = of_get_flat_dt_prop(node, "size", &len); 404 if (!prop) 405 return -EINVAL; 406 407 if (len != dt_root_size_cells * sizeof(__be32)) { 408 pr_err("invalid size property in '%s' node.\n", uname); 409 return -EINVAL; 410 } 411 size = dt_mem_next_cell(dt_root_size_cells, &prop); 412 413 prop = of_get_flat_dt_prop(node, "alignment", &len); 414 if (prop) { 415 if (len != dt_root_addr_cells * sizeof(__be32)) { 416 pr_err("invalid alignment property in '%s' node.\n", 417 uname); 418 return -EINVAL; 419 } 420 align = dt_mem_next_cell(dt_root_addr_cells, &prop); 421 } 422 423 nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL; 424 default_cma = of_get_flat_dt_prop(node, "linux,cma-default", NULL); 425 426 if (default_cma && cma_skip_dt_default_reserved_mem()) { 427 pr_err("Skipping dt linux,cma-default for \"cma=\" kernel param.\n"); 428 return -EINVAL; 429 } 430 431 /* Need adjust the alignment to satisfy the CMA requirement */ 432 if (IS_ENABLED(CONFIG_CMA) 433 && of_flat_dt_is_compatible(node, "shared-dma-pool") 434 && of_get_flat_dt_prop(node, "reusable", NULL) 435 && !nomap) 436 align = max_t(phys_addr_t, align, CMA_MIN_ALIGNMENT_BYTES); 437 438 prop = of_flat_dt_get_addr_size_prop(node, "alloc-ranges", &len); 439 if (prop) { 440 for (i = 0; i < len; i++) { 441 u64 b, s; 442 443 of_flat_dt_read_addr_size(prop, i, &b, &s); 444 445 start = b; 446 end = b + s; 447 448 base = 0; 449 ret = __reserved_mem_alloc_in_range(size, align, 450 start, end, nomap, &base); 451 if (ret == 0) { 452 pr_debug("allocated memory for '%s' node: base %pa, size %lu MiB\n", 453 uname, &base, 454 (unsigned long)(size / SZ_1M)); 455 break; 456 } 457 } 458 } else { 459 ret = early_init_dt_alloc_reserved_memory_arch(size, align, 460 0, 0, nomap, &base); 461 if (ret == 0) 462 pr_debug("allocated memory for '%s' node: base %pa, size %lu MiB\n", 463 uname, &base, (unsigned long)(size / SZ_1M)); 464 } 465 466 if (base == 0) { 467 pr_err("failed to allocate memory for node '%s': size %lu MiB\n", 468 uname, (unsigned long)(size / SZ_1M)); 469 return -ENOMEM; 470 } 471 /* Architecture specific contiguous memory fixup. */ 472 if (of_flat_dt_is_compatible(node, "shared-dma-pool") && 473 of_get_flat_dt_prop(node, "reusable", NULL)) 474 dma_contiguous_early_fixup(base, size); 475 /* Save region in the reserved_mem array */ 476 fdt_reserved_mem_save_node(node, uname, base, size); 477 return 0; 478 } 479 480 static const struct of_device_id __rmem_of_table_sentinel 481 __used __section("__reservedmem_of_table_end"); 482 483 /* 484 * __reserved_mem_init_node() - call region specific reserved memory init code 485 */ 486 static int __init __reserved_mem_init_node(struct reserved_mem *rmem) 487 { 488 extern const struct of_device_id __reservedmem_of_table[]; 489 const struct of_device_id *i; 490 int ret = -ENOENT; 491 492 for (i = __reservedmem_of_table; i < &__rmem_of_table_sentinel; i++) { 493 reservedmem_of_init_fn initfn = i->data; 494 const char *compat = i->compatible; 495 496 if (!of_flat_dt_is_compatible(rmem->fdt_node, compat)) 497 continue; 498 499 ret = initfn(rmem); 500 if (ret == 0) { 501 pr_info("initialized node %s, compatible id %s\n", 502 rmem->name, compat); 503 break; 504 } 505 } 506 return ret; 507 } 508 509 static int __init __rmem_cmp(const void *a, const void *b) 510 { 511 const struct reserved_mem *ra = a, *rb = b; 512 513 if (ra->base < rb->base) 514 return -1; 515 516 if (ra->base > rb->base) 517 return 1; 518 519 /* 520 * Put the dynamic allocations (address == 0, size == 0) before static 521 * allocations at address 0x0 so that overlap detection works 522 * correctly. 523 */ 524 if (ra->size < rb->size) 525 return -1; 526 if (ra->size > rb->size) 527 return 1; 528 529 if (ra->fdt_node < rb->fdt_node) 530 return -1; 531 if (ra->fdt_node > rb->fdt_node) 532 return 1; 533 534 return 0; 535 } 536 537 static void __init __rmem_check_for_overlap(void) 538 { 539 int i; 540 541 if (reserved_mem_count < 2) 542 return; 543 544 sort(reserved_mem, reserved_mem_count, sizeof(reserved_mem[0]), 545 __rmem_cmp, NULL); 546 for (i = 0; i < reserved_mem_count - 1; i++) { 547 struct reserved_mem *this, *next; 548 549 this = &reserved_mem[i]; 550 next = &reserved_mem[i + 1]; 551 552 if (this->base + this->size > next->base) { 553 phys_addr_t this_end, next_end; 554 555 this_end = this->base + this->size; 556 next_end = next->base + next->size; 557 pr_err("OVERLAP DETECTED!\n%s (%pa--%pa) overlaps with %s (%pa--%pa)\n", 558 this->name, &this->base, &this_end, 559 next->name, &next->base, &next_end); 560 } 561 } 562 } 563 564 /** 565 * fdt_init_reserved_mem_node() - Initialize a reserved memory region 566 * @rmem: reserved_mem struct of the memory region to be initialized. 567 * 568 * This function is used to call the region specific initialization 569 * function for a reserved memory region. 570 */ 571 static void __init fdt_init_reserved_mem_node(struct reserved_mem *rmem) 572 { 573 unsigned long node = rmem->fdt_node; 574 int err = 0; 575 bool nomap; 576 577 nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL; 578 579 err = __reserved_mem_init_node(rmem); 580 if (err != 0 && err != -ENOENT) { 581 pr_info("node %s compatible matching fail\n", rmem->name); 582 if (nomap) 583 memblock_clear_nomap(rmem->base, rmem->size); 584 else 585 memblock_phys_free(rmem->base, rmem->size); 586 } else { 587 phys_addr_t end = rmem->base + rmem->size - 1; 588 bool reusable = 589 (of_get_flat_dt_prop(node, "reusable", NULL)) != NULL; 590 591 pr_info("%pa..%pa (%lu KiB) %s %s %s\n", 592 &rmem->base, &end, (unsigned long)(rmem->size / SZ_1K), 593 nomap ? "nomap" : "map", 594 reusable ? "reusable" : "non-reusable", 595 rmem->name ? rmem->name : "unknown"); 596 } 597 } 598 599 struct rmem_assigned_device { 600 struct device *dev; 601 struct reserved_mem *rmem; 602 struct list_head list; 603 }; 604 605 static LIST_HEAD(of_rmem_assigned_device_list); 606 static DEFINE_MUTEX(of_rmem_assigned_device_mutex); 607 608 /** 609 * of_reserved_mem_device_init_by_idx() - assign reserved memory region to 610 * given device 611 * @dev: Pointer to the device to configure 612 * @np: Pointer to the device_node with 'reserved-memory' property 613 * @idx: Index of selected region 614 * 615 * This function assigns respective DMA-mapping operations based on reserved 616 * memory region specified by 'memory-region' property in @np node to the @dev 617 * device. When driver needs to use more than one reserved memory region, it 618 * should allocate child devices and initialize regions by name for each of 619 * child device. 620 * 621 * Returns error code or zero on success. 622 */ 623 int of_reserved_mem_device_init_by_idx(struct device *dev, 624 struct device_node *np, int idx) 625 { 626 struct rmem_assigned_device *rd; 627 struct device_node *target; 628 struct reserved_mem *rmem; 629 int ret; 630 631 if (!np || !dev) 632 return -EINVAL; 633 634 target = of_parse_phandle(np, "memory-region", idx); 635 if (!target) 636 return -ENODEV; 637 638 if (!of_device_is_available(target)) { 639 of_node_put(target); 640 return 0; 641 } 642 643 rmem = of_reserved_mem_lookup(target); 644 of_node_put(target); 645 646 if (!rmem || !rmem->ops || !rmem->ops->device_init) 647 return -EINVAL; 648 649 rd = kmalloc(sizeof(struct rmem_assigned_device), GFP_KERNEL); 650 if (!rd) 651 return -ENOMEM; 652 653 ret = rmem->ops->device_init(rmem, dev); 654 if (ret == 0) { 655 rd->dev = dev; 656 rd->rmem = rmem; 657 658 mutex_lock(&of_rmem_assigned_device_mutex); 659 list_add(&rd->list, &of_rmem_assigned_device_list); 660 mutex_unlock(&of_rmem_assigned_device_mutex); 661 662 dev_info(dev, "assigned reserved memory node %s\n", rmem->name); 663 } else { 664 kfree(rd); 665 } 666 667 return ret; 668 } 669 EXPORT_SYMBOL_GPL(of_reserved_mem_device_init_by_idx); 670 671 /** 672 * of_reserved_mem_device_init_by_name() - assign named reserved memory region 673 * to given device 674 * @dev: pointer to the device to configure 675 * @np: pointer to the device node with 'memory-region' property 676 * @name: name of the selected memory region 677 * 678 * Returns: 0 on success or a negative error-code on failure. 679 */ 680 int of_reserved_mem_device_init_by_name(struct device *dev, 681 struct device_node *np, 682 const char *name) 683 { 684 int idx = of_property_match_string(np, "memory-region-names", name); 685 686 return of_reserved_mem_device_init_by_idx(dev, np, idx); 687 } 688 EXPORT_SYMBOL_GPL(of_reserved_mem_device_init_by_name); 689 690 /** 691 * of_reserved_mem_device_release() - release reserved memory device structures 692 * @dev: Pointer to the device to deconfigure 693 * 694 * This function releases structures allocated for memory region handling for 695 * the given device. 696 */ 697 void of_reserved_mem_device_release(struct device *dev) 698 { 699 struct rmem_assigned_device *rd, *tmp; 700 LIST_HEAD(release_list); 701 702 mutex_lock(&of_rmem_assigned_device_mutex); 703 list_for_each_entry_safe(rd, tmp, &of_rmem_assigned_device_list, list) { 704 if (rd->dev == dev) 705 list_move_tail(&rd->list, &release_list); 706 } 707 mutex_unlock(&of_rmem_assigned_device_mutex); 708 709 list_for_each_entry_safe(rd, tmp, &release_list, list) { 710 if (rd->rmem && rd->rmem->ops && rd->rmem->ops->device_release) 711 rd->rmem->ops->device_release(rd->rmem, dev); 712 713 kfree(rd); 714 } 715 } 716 EXPORT_SYMBOL_GPL(of_reserved_mem_device_release); 717 718 /** 719 * of_reserved_mem_lookup() - acquire reserved_mem from a device node 720 * @np: node pointer of the desired reserved-memory region 721 * 722 * This function allows drivers to acquire a reference to the reserved_mem 723 * struct based on a device node handle. 724 * 725 * Returns a reserved_mem reference, or NULL on error. 726 */ 727 struct reserved_mem *of_reserved_mem_lookup(struct device_node *np) 728 { 729 const char *name; 730 int i; 731 732 if (!np->full_name) 733 return NULL; 734 735 name = kbasename(np->full_name); 736 for (i = 0; i < reserved_mem_count; i++) 737 if (!strcmp(reserved_mem[i].name, name)) 738 return &reserved_mem[i]; 739 740 return NULL; 741 } 742 EXPORT_SYMBOL_GPL(of_reserved_mem_lookup); 743 744 /** 745 * of_reserved_mem_region_to_resource() - Get a reserved memory region as a resource 746 * @np: node containing 'memory-region' property 747 * @idx: index of 'memory-region' property to lookup 748 * @res: Pointer to a struct resource to fill in with reserved region 749 * 750 * This function allows drivers to lookup a node's 'memory-region' property 751 * entries by index and return a struct resource for the entry. 752 * 753 * Returns 0 on success with @res filled in. Returns -ENODEV if 'memory-region' 754 * is missing or unavailable, -EINVAL for any other error. 755 */ 756 int of_reserved_mem_region_to_resource(const struct device_node *np, 757 unsigned int idx, struct resource *res) 758 { 759 struct reserved_mem *rmem; 760 761 if (!np) 762 return -EINVAL; 763 764 struct device_node *target __free(device_node) = of_parse_phandle(np, "memory-region", idx); 765 if (!target || !of_device_is_available(target)) 766 return -ENODEV; 767 768 rmem = of_reserved_mem_lookup(target); 769 if (!rmem) 770 return -EINVAL; 771 772 resource_set_range(res, rmem->base, rmem->size); 773 res->flags = IORESOURCE_MEM; 774 res->name = rmem->name; 775 return 0; 776 } 777 EXPORT_SYMBOL_GPL(of_reserved_mem_region_to_resource); 778 779 /** 780 * of_reserved_mem_region_to_resource_byname() - Get a reserved memory region as a resource 781 * @np: node containing 'memory-region' property 782 * @name: name of 'memory-region' property entry to lookup 783 * @res: Pointer to a struct resource to fill in with reserved region 784 * 785 * This function allows drivers to lookup a node's 'memory-region' property 786 * entries by name and return a struct resource for the entry. 787 * 788 * Returns 0 on success with @res filled in, or a negative error-code on 789 * failure. 790 */ 791 int of_reserved_mem_region_to_resource_byname(const struct device_node *np, 792 const char *name, 793 struct resource *res) 794 { 795 int idx; 796 797 if (!name) 798 return -EINVAL; 799 800 idx = of_property_match_string(np, "memory-region-names", name); 801 if (idx < 0) 802 return idx; 803 804 return of_reserved_mem_region_to_resource(np, idx, res); 805 } 806 EXPORT_SYMBOL_GPL(of_reserved_mem_region_to_resource_byname); 807 808 /** 809 * of_reserved_mem_region_count() - Return the number of 'memory-region' entries 810 * @np: node containing 'memory-region' property 811 * 812 * This function allows drivers to retrieve the number of entries for a node's 813 * 'memory-region' property. 814 * 815 * Returns the number of entries on success, or negative error code on a 816 * malformed property. 817 */ 818 int of_reserved_mem_region_count(const struct device_node *np) 819 { 820 return of_count_phandle_with_args(np, "memory-region", NULL); 821 } 822 EXPORT_SYMBOL_GPL(of_reserved_mem_region_count); 823