xref: /linux/drivers/nfc/st-nci/spi.c (revision d257f9bf06129613de539ea71ecea60848b662cd)
1 /*
2  * SPI Link Layer for ST NCI based Driver
3  * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms and conditions of the GNU General Public License,
7  * version 2, as published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, see <http://www.gnu.org/licenses/>.
16  */
17 
18 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
19 
20 #include <linux/module.h>
21 #include <linux/spi/spi.h>
22 #include <linux/gpio/consumer.h>
23 #include <linux/acpi.h>
24 #include <linux/interrupt.h>
25 #include <linux/delay.h>
26 #include <linux/nfc.h>
27 #include <linux/of.h>
28 #include <net/nfc/nci.h>
29 
30 #include "st-nci.h"
31 
32 #define DRIVER_DESC "NCI NFC driver for ST_NCI"
33 
34 /* ndlc header */
35 #define ST_NCI_FRAME_HEADROOM	1
36 #define ST_NCI_FRAME_TAILROOM	0
37 
38 #define ST_NCI_SPI_MIN_SIZE 4   /* PCB(1) + NCI Packet header(3) */
39 #define ST_NCI_SPI_MAX_SIZE 250 /* req 4.2.1 */
40 
41 #define ST_NCI_DRIVER_NAME "st_nci"
42 #define ST_NCI_SPI_DRIVER_NAME "st_nci_spi"
43 
44 struct st_nci_spi_phy {
45 	struct spi_device *spi_dev;
46 	struct llt_ndlc *ndlc;
47 
48 	bool irq_active;
49 
50 	struct gpio_desc *gpiod_reset;
51 
52 	struct st_nci_se_status se_status;
53 };
54 
55 static int st_nci_spi_enable(void *phy_id)
56 {
57 	struct st_nci_spi_phy *phy = phy_id;
58 
59 	gpiod_set_value(phy->gpiod_reset, 0);
60 	usleep_range(10000, 15000);
61 	gpiod_set_value(phy->gpiod_reset, 1);
62 	usleep_range(80000, 85000);
63 
64 	if (phy->ndlc->powered == 0 && phy->irq_active == 0) {
65 		enable_irq(phy->spi_dev->irq);
66 		phy->irq_active = true;
67 	}
68 
69 	return 0;
70 }
71 
72 static void st_nci_spi_disable(void *phy_id)
73 {
74 	struct st_nci_spi_phy *phy = phy_id;
75 
76 	disable_irq_nosync(phy->spi_dev->irq);
77 	phy->irq_active = false;
78 }
79 
80 /*
81  * Writing a frame must not return the number of written bytes.
82  * It must return either zero for success, or <0 for error.
83  * In addition, it must not alter the skb
84  */
85 static int st_nci_spi_write(void *phy_id, struct sk_buff *skb)
86 {
87 	int r;
88 	struct st_nci_spi_phy *phy = phy_id;
89 	struct spi_device *dev = phy->spi_dev;
90 	struct sk_buff *skb_rx;
91 	u8 buf[ST_NCI_SPI_MAX_SIZE + NCI_DATA_HDR_SIZE +
92 	       ST_NCI_FRAME_HEADROOM + ST_NCI_FRAME_TAILROOM];
93 	struct spi_transfer spi_xfer = {
94 		.tx_buf = skb->data,
95 		.rx_buf = buf,
96 		.len = skb->len,
97 	};
98 
99 	if (phy->ndlc->hard_fault != 0)
100 		return phy->ndlc->hard_fault;
101 
102 	r = spi_sync_transfer(dev, &spi_xfer, 1);
103 	/*
104 	 * We may have received some valuable data on miso line.
105 	 * Send them back in the ndlc state machine.
106 	 */
107 	if (!r) {
108 		skb_rx = alloc_skb(skb->len, GFP_KERNEL);
109 		if (!skb_rx) {
110 			r = -ENOMEM;
111 			goto exit;
112 		}
113 
114 		skb_put(skb_rx, skb->len);
115 		memcpy(skb_rx->data, buf, skb->len);
116 		ndlc_recv(phy->ndlc, skb_rx);
117 	}
118 
119 exit:
120 	return r;
121 }
122 
123 /*
124  * Reads an ndlc frame and returns it in a newly allocated sk_buff.
125  * returns:
126  * 0 : if received frame is complete
127  * -EREMOTEIO : i2c read error (fatal)
128  * -EBADMSG : frame was incorrect and discarded
129  * -ENOMEM : cannot allocate skb, frame dropped
130  */
131 static int st_nci_spi_read(struct st_nci_spi_phy *phy,
132 			struct sk_buff **skb)
133 {
134 	int r;
135 	u8 len;
136 	u8 buf[ST_NCI_SPI_MAX_SIZE];
137 	struct spi_device *dev = phy->spi_dev;
138 	struct spi_transfer spi_xfer = {
139 		.rx_buf = buf,
140 		.len = ST_NCI_SPI_MIN_SIZE,
141 	};
142 
143 	r = spi_sync_transfer(dev, &spi_xfer, 1);
144 	if (r < 0)
145 		return -EREMOTEIO;
146 
147 	len = be16_to_cpu(*(__be16 *) (buf + 2));
148 	if (len > ST_NCI_SPI_MAX_SIZE) {
149 		nfc_err(&dev->dev, "invalid frame len\n");
150 		phy->ndlc->hard_fault = 1;
151 		return -EBADMSG;
152 	}
153 
154 	*skb = alloc_skb(ST_NCI_SPI_MIN_SIZE + len, GFP_KERNEL);
155 	if (*skb == NULL)
156 		return -ENOMEM;
157 
158 	skb_reserve(*skb, ST_NCI_SPI_MIN_SIZE);
159 	skb_put(*skb, ST_NCI_SPI_MIN_SIZE);
160 	memcpy((*skb)->data, buf, ST_NCI_SPI_MIN_SIZE);
161 
162 	if (!len)
163 		return 0;
164 
165 	spi_xfer.len = len;
166 	r = spi_sync_transfer(dev, &spi_xfer, 1);
167 	if (r < 0) {
168 		kfree_skb(*skb);
169 		return -EREMOTEIO;
170 	}
171 
172 	skb_put(*skb, len);
173 	memcpy((*skb)->data + ST_NCI_SPI_MIN_SIZE, buf, len);
174 
175 	return 0;
176 }
177 
178 /*
179  * Reads an ndlc frame from the chip.
180  *
181  * On ST21NFCB, IRQ goes in idle state when read starts.
182  */
183 static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id)
184 {
185 	struct st_nci_spi_phy *phy = phy_id;
186 	struct spi_device *dev;
187 	struct sk_buff *skb = NULL;
188 	int r;
189 
190 	if (!phy || !phy->ndlc || irq != phy->spi_dev->irq) {
191 		WARN_ON_ONCE(1);
192 		return IRQ_NONE;
193 	}
194 
195 	dev = phy->spi_dev;
196 	dev_dbg(&dev->dev, "IRQ\n");
197 
198 	if (phy->ndlc->hard_fault)
199 		return IRQ_HANDLED;
200 
201 	if (!phy->ndlc->powered) {
202 		st_nci_spi_disable(phy);
203 		return IRQ_HANDLED;
204 	}
205 
206 	r = st_nci_spi_read(phy, &skb);
207 	if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG)
208 		return IRQ_HANDLED;
209 
210 	ndlc_recv(phy->ndlc, skb);
211 
212 	return IRQ_HANDLED;
213 }
214 
215 static struct nfc_phy_ops spi_phy_ops = {
216 	.write = st_nci_spi_write,
217 	.enable = st_nci_spi_enable,
218 	.disable = st_nci_spi_disable,
219 };
220 
221 static const struct acpi_gpio_params reset_gpios = { 1, 0, false };
222 
223 static const struct acpi_gpio_mapping acpi_st_nci_gpios[] = {
224 	{ "reset-gpios", &reset_gpios, 1 },
225 	{},
226 };
227 
228 static int st_nci_spi_probe(struct spi_device *dev)
229 {
230 	struct st_nci_spi_phy *phy;
231 	int r;
232 
233 	dev_dbg(&dev->dev, "%s\n", __func__);
234 	dev_dbg(&dev->dev, "IRQ: %d\n", dev->irq);
235 
236 	/* Check SPI platform functionnalities */
237 	if (!dev) {
238 		pr_debug("%s: dev is NULL. Device is not accessible.\n",
239 			__func__);
240 		return -ENODEV;
241 	}
242 
243 	phy = devm_kzalloc(&dev->dev, sizeof(struct st_nci_spi_phy),
244 			   GFP_KERNEL);
245 	if (!phy)
246 		return -ENOMEM;
247 
248 	phy->spi_dev = dev;
249 
250 	spi_set_drvdata(dev, phy);
251 
252 	r = devm_acpi_dev_add_driver_gpios(&dev->dev, acpi_st_nci_gpios);
253 	if (r)
254 		dev_dbg(&dev->dev, "Unable to add GPIO mapping table\n");
255 
256 	/* Get RESET GPIO */
257 	phy->gpiod_reset = devm_gpiod_get(&dev->dev, "reset", GPIOD_OUT_HIGH);
258 	if (IS_ERR(phy->gpiod_reset)) {
259 		nfc_err(&dev->dev, "Unable to get RESET GPIO\n");
260 		return PTR_ERR(phy->gpiod_reset);
261 	}
262 
263 	phy->se_status.is_ese_present =
264 			device_property_read_bool(&dev->dev, "ese-present");
265 	phy->se_status.is_uicc_present =
266 			device_property_read_bool(&dev->dev, "uicc-present");
267 
268 	r = ndlc_probe(phy, &spi_phy_ops, &dev->dev,
269 			ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM,
270 			&phy->ndlc, &phy->se_status);
271 	if (r < 0) {
272 		nfc_err(&dev->dev, "Unable to register ndlc layer\n");
273 		return r;
274 	}
275 
276 	phy->irq_active = true;
277 	r = devm_request_threaded_irq(&dev->dev, dev->irq, NULL,
278 				st_nci_irq_thread_fn,
279 				IRQF_ONESHOT,
280 				ST_NCI_SPI_DRIVER_NAME, phy);
281 	if (r < 0)
282 		nfc_err(&dev->dev, "Unable to register IRQ handler\n");
283 
284 	return r;
285 }
286 
287 static int st_nci_spi_remove(struct spi_device *dev)
288 {
289 	struct st_nci_spi_phy *phy = spi_get_drvdata(dev);
290 
291 	dev_dbg(&dev->dev, "%s\n", __func__);
292 
293 	ndlc_remove(phy->ndlc);
294 
295 	return 0;
296 }
297 
298 static struct spi_device_id st_nci_spi_id_table[] = {
299 	{ST_NCI_SPI_DRIVER_NAME, 0},
300 	{}
301 };
302 MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table);
303 
304 static const struct acpi_device_id st_nci_spi_acpi_match[] = {
305 	{"SMO2101", 0},
306 	{}
307 };
308 MODULE_DEVICE_TABLE(acpi, st_nci_spi_acpi_match);
309 
310 static const struct of_device_id of_st_nci_spi_match[] = {
311 	{ .compatible = "st,st21nfcb-spi", },
312 	{}
313 };
314 MODULE_DEVICE_TABLE(of, of_st_nci_spi_match);
315 
316 static struct spi_driver st_nci_spi_driver = {
317 	.driver = {
318 		.name = ST_NCI_SPI_DRIVER_NAME,
319 		.of_match_table = of_match_ptr(of_st_nci_spi_match),
320 		.acpi_match_table = ACPI_PTR(st_nci_spi_acpi_match),
321 	},
322 	.probe = st_nci_spi_probe,
323 	.id_table = st_nci_spi_id_table,
324 	.remove = st_nci_spi_remove,
325 };
326 module_spi_driver(st_nci_spi_driver);
327 
328 MODULE_LICENSE("GPL");
329 MODULE_DESCRIPTION(DRIVER_DESC);
330