xref: /linux/drivers/nfc/st-nci/i2c.c (revision 80d443e8876602be2c130f79c4de81e12e2a700d)
1 /*
2  * I2C Link Layer for ST NCI NFC controller familly based Driver
3  * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms and conditions of the GNU General Public License,
7  * version 2, as published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, see <http://www.gnu.org/licenses/>.
16  */
17 
18 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
19 
20 #include <linux/module.h>
21 #include <linux/i2c.h>
22 #include <linux/gpio.h>
23 #include <linux/gpio/consumer.h>
24 #include <linux/of_irq.h>
25 #include <linux/of_gpio.h>
26 #include <linux/acpi.h>
27 #include <linux/interrupt.h>
28 #include <linux/delay.h>
29 #include <linux/nfc.h>
30 #include <linux/platform_data/st-nci.h>
31 
32 #include "st-nci.h"
33 
34 #define DRIVER_DESC "NCI NFC driver for ST_NCI"
35 
36 /* ndlc header */
37 #define ST_NCI_FRAME_HEADROOM 1
38 #define ST_NCI_FRAME_TAILROOM 0
39 
40 #define ST_NCI_I2C_MIN_SIZE 4   /* PCB(1) + NCI Packet header(3) */
41 #define ST_NCI_I2C_MAX_SIZE 250 /* req 4.2.1 */
42 
43 #define ST_NCI_I2C_DRIVER_NAME "st_nci_i2c"
44 
45 #define ST_NCI_GPIO_NAME_RESET "reset"
46 
47 struct st_nci_i2c_phy {
48 	struct i2c_client *i2c_dev;
49 	struct llt_ndlc *ndlc;
50 
51 	bool irq_active;
52 
53 	unsigned int gpio_reset;
54 	unsigned int irq_polarity;
55 
56 	struct st_nci_se_status se_status;
57 };
58 
59 static int st_nci_i2c_enable(void *phy_id)
60 {
61 	struct st_nci_i2c_phy *phy = phy_id;
62 
63 	gpio_set_value(phy->gpio_reset, 0);
64 	usleep_range(10000, 15000);
65 	gpio_set_value(phy->gpio_reset, 1);
66 	usleep_range(80000, 85000);
67 
68 	if (phy->ndlc->powered == 0 && phy->irq_active == 0) {
69 		enable_irq(phy->i2c_dev->irq);
70 		phy->irq_active = true;
71 	}
72 
73 	return 0;
74 }
75 
76 static void st_nci_i2c_disable(void *phy_id)
77 {
78 	struct st_nci_i2c_phy *phy = phy_id;
79 
80 	disable_irq_nosync(phy->i2c_dev->irq);
81 	phy->irq_active = false;
82 }
83 
84 /*
85  * Writing a frame must not return the number of written bytes.
86  * It must return either zero for success, or <0 for error.
87  * In addition, it must not alter the skb
88  */
89 static int st_nci_i2c_write(void *phy_id, struct sk_buff *skb)
90 {
91 	int r = -1;
92 	struct st_nci_i2c_phy *phy = phy_id;
93 	struct i2c_client *client = phy->i2c_dev;
94 
95 	if (phy->ndlc->hard_fault != 0)
96 		return phy->ndlc->hard_fault;
97 
98 	r = i2c_master_send(client, skb->data, skb->len);
99 	if (r < 0) {  /* Retry, chip was in standby */
100 		usleep_range(1000, 4000);
101 		r = i2c_master_send(client, skb->data, skb->len);
102 	}
103 
104 	if (r >= 0) {
105 		if (r != skb->len)
106 			r = -EREMOTEIO;
107 		else
108 			r = 0;
109 	}
110 
111 	return r;
112 }
113 
114 /*
115  * Reads an ndlc frame and returns it in a newly allocated sk_buff.
116  * returns:
117  * 0 : if received frame is complete
118  * -EREMOTEIO : i2c read error (fatal)
119  * -EBADMSG : frame was incorrect and discarded
120  * -ENOMEM : cannot allocate skb, frame dropped
121  */
122 static int st_nci_i2c_read(struct st_nci_i2c_phy *phy,
123 				 struct sk_buff **skb)
124 {
125 	int r;
126 	u8 len;
127 	u8 buf[ST_NCI_I2C_MAX_SIZE];
128 	struct i2c_client *client = phy->i2c_dev;
129 
130 	r = i2c_master_recv(client, buf, ST_NCI_I2C_MIN_SIZE);
131 	if (r < 0) {  /* Retry, chip was in standby */
132 		usleep_range(1000, 4000);
133 		r = i2c_master_recv(client, buf, ST_NCI_I2C_MIN_SIZE);
134 	}
135 
136 	if (r != ST_NCI_I2C_MIN_SIZE)
137 		return -EREMOTEIO;
138 
139 	len = be16_to_cpu(*(__be16 *) (buf + 2));
140 	if (len > ST_NCI_I2C_MAX_SIZE) {
141 		nfc_err(&client->dev, "invalid frame len\n");
142 		return -EBADMSG;
143 	}
144 
145 	*skb = alloc_skb(ST_NCI_I2C_MIN_SIZE + len, GFP_KERNEL);
146 	if (*skb == NULL)
147 		return -ENOMEM;
148 
149 	skb_reserve(*skb, ST_NCI_I2C_MIN_SIZE);
150 	skb_put(*skb, ST_NCI_I2C_MIN_SIZE);
151 	memcpy((*skb)->data, buf, ST_NCI_I2C_MIN_SIZE);
152 
153 	if (!len)
154 		return 0;
155 
156 	r = i2c_master_recv(client, buf, len);
157 	if (r != len) {
158 		kfree_skb(*skb);
159 		return -EREMOTEIO;
160 	}
161 
162 	skb_put(*skb, len);
163 	memcpy((*skb)->data + ST_NCI_I2C_MIN_SIZE, buf, len);
164 
165 	return 0;
166 }
167 
168 /*
169  * Reads an ndlc frame from the chip.
170  *
171  * On ST_NCI, IRQ goes in idle state when read starts.
172  */
173 static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id)
174 {
175 	struct st_nci_i2c_phy *phy = phy_id;
176 	struct i2c_client *client;
177 	struct sk_buff *skb = NULL;
178 	int r;
179 
180 	if (!phy || !phy->ndlc || irq != phy->i2c_dev->irq) {
181 		WARN_ON_ONCE(1);
182 		return IRQ_NONE;
183 	}
184 
185 	client = phy->i2c_dev;
186 	dev_dbg(&client->dev, "IRQ\n");
187 
188 	if (phy->ndlc->hard_fault)
189 		return IRQ_HANDLED;
190 
191 	if (!phy->ndlc->powered) {
192 		st_nci_i2c_disable(phy);
193 		return IRQ_HANDLED;
194 	}
195 
196 	r = st_nci_i2c_read(phy, &skb);
197 	if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG)
198 		return IRQ_HANDLED;
199 
200 	ndlc_recv(phy->ndlc, skb);
201 
202 	return IRQ_HANDLED;
203 }
204 
205 static struct nfc_phy_ops i2c_phy_ops = {
206 	.write = st_nci_i2c_write,
207 	.enable = st_nci_i2c_enable,
208 	.disable = st_nci_i2c_disable,
209 };
210 
211 static int st_nci_i2c_acpi_request_resources(struct i2c_client *client)
212 {
213 	struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
214 	struct gpio_desc *gpiod_reset;
215 	struct device *dev = &client->dev;
216 	u8 tmp;
217 
218 	/* Get RESET GPIO from ACPI */
219 	gpiod_reset = devm_gpiod_get_index(dev, ST_NCI_GPIO_NAME_RESET, 1,
220 					   GPIOD_OUT_HIGH);
221 	if (IS_ERR(gpiod_reset)) {
222 		nfc_err(dev, "Unable to get RESET GPIO\n");
223 		return -ENODEV;
224 	}
225 
226 	phy->gpio_reset = desc_to_gpio(gpiod_reset);
227 
228 	phy->irq_polarity = irq_get_trigger_type(client->irq);
229 
230 	phy->se_status.is_ese_present = false;
231 	phy->se_status.is_uicc_present = false;
232 
233 	if (device_property_present(dev, "ese-present")) {
234 		device_property_read_u8(dev, "ese-present", &tmp);
235 		phy->se_status.is_ese_present = tmp;
236 	}
237 
238 	if (device_property_present(dev, "uicc-present")) {
239 		device_property_read_u8(dev, "uicc-present", &tmp);
240 		phy->se_status.is_uicc_present = tmp;
241 	}
242 
243 	return 0;
244 }
245 
246 static int st_nci_i2c_of_request_resources(struct i2c_client *client)
247 {
248 	struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
249 	struct device_node *pp;
250 	int gpio;
251 	int r;
252 
253 	pp = client->dev.of_node;
254 	if (!pp)
255 		return -ENODEV;
256 
257 	/* Get GPIO from device tree */
258 	gpio = of_get_named_gpio(pp, "reset-gpios", 0);
259 	if (gpio < 0) {
260 		nfc_err(&client->dev,
261 			"Failed to retrieve reset-gpios from device tree\n");
262 		return gpio;
263 	}
264 
265 	/* GPIO request and configuration */
266 	r = devm_gpio_request_one(&client->dev, gpio,
267 				GPIOF_OUT_INIT_HIGH, ST_NCI_GPIO_NAME_RESET);
268 	if (r) {
269 		nfc_err(&client->dev, "Failed to request reset pin\n");
270 		return r;
271 	}
272 	phy->gpio_reset = gpio;
273 
274 	phy->irq_polarity = irq_get_trigger_type(client->irq);
275 
276 	phy->se_status.is_ese_present =
277 				of_property_read_bool(pp, "ese-present");
278 	phy->se_status.is_uicc_present =
279 				of_property_read_bool(pp, "uicc-present");
280 
281 	return 0;
282 }
283 
284 static int st_nci_i2c_request_resources(struct i2c_client *client)
285 {
286 	struct st_nci_nfc_platform_data *pdata;
287 	struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
288 	int r;
289 
290 	pdata = client->dev.platform_data;
291 	if (pdata == NULL) {
292 		nfc_err(&client->dev, "No platform data\n");
293 		return -EINVAL;
294 	}
295 
296 	/* store for later use */
297 	phy->gpio_reset = pdata->gpio_reset;
298 	phy->irq_polarity = pdata->irq_polarity;
299 
300 	r = devm_gpio_request_one(&client->dev,
301 			phy->gpio_reset, GPIOF_OUT_INIT_HIGH,
302 			ST_NCI_GPIO_NAME_RESET);
303 	if (r) {
304 		pr_err("%s : reset gpio_request failed\n", __FILE__);
305 		return r;
306 	}
307 
308 	phy->se_status.is_ese_present = pdata->is_ese_present;
309 	phy->se_status.is_uicc_present = pdata->is_uicc_present;
310 
311 	return 0;
312 }
313 
314 static int st_nci_i2c_probe(struct i2c_client *client,
315 				  const struct i2c_device_id *id)
316 {
317 	struct st_nci_i2c_phy *phy;
318 	struct st_nci_nfc_platform_data *pdata;
319 	int r;
320 
321 	dev_dbg(&client->dev, "%s\n", __func__);
322 	dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
323 
324 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
325 		nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
326 		return -ENODEV;
327 	}
328 
329 	phy = devm_kzalloc(&client->dev, sizeof(struct st_nci_i2c_phy),
330 			   GFP_KERNEL);
331 	if (!phy)
332 		return -ENOMEM;
333 
334 	phy->i2c_dev = client;
335 
336 	i2c_set_clientdata(client, phy);
337 
338 	pdata = client->dev.platform_data;
339 	if (!pdata && client->dev.of_node) {
340 		r = st_nci_i2c_of_request_resources(client);
341 		if (r) {
342 			nfc_err(&client->dev, "No platform data\n");
343 			return r;
344 		}
345 	} else if (pdata) {
346 		r = st_nci_i2c_request_resources(client);
347 		if (r) {
348 			nfc_err(&client->dev,
349 				"Cannot get platform resources\n");
350 			return r;
351 		}
352 	} else if (ACPI_HANDLE(&client->dev)) {
353 		r = st_nci_i2c_acpi_request_resources(client);
354 		if (r) {
355 			nfc_err(&client->dev, "Cannot get ACPI data\n");
356 			return r;
357 		}
358 	} else {
359 		nfc_err(&client->dev,
360 			"st_nci platform resources not available\n");
361 		return -ENODEV;
362 	}
363 
364 	r = ndlc_probe(phy, &i2c_phy_ops, &client->dev,
365 			ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM,
366 			&phy->ndlc, &phy->se_status);
367 	if (r < 0) {
368 		nfc_err(&client->dev, "Unable to register ndlc layer\n");
369 		return r;
370 	}
371 
372 	phy->irq_active = true;
373 	r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
374 				st_nci_irq_thread_fn,
375 				phy->irq_polarity | IRQF_ONESHOT,
376 				ST_NCI_DRIVER_NAME, phy);
377 	if (r < 0)
378 		nfc_err(&client->dev, "Unable to register IRQ handler\n");
379 
380 	return r;
381 }
382 
383 static int st_nci_i2c_remove(struct i2c_client *client)
384 {
385 	struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
386 
387 	dev_dbg(&client->dev, "%s\n", __func__);
388 
389 	ndlc_remove(phy->ndlc);
390 
391 	return 0;
392 }
393 
394 static struct i2c_device_id st_nci_i2c_id_table[] = {
395 	{ST_NCI_DRIVER_NAME, 0},
396 	{}
397 };
398 MODULE_DEVICE_TABLE(i2c, st_nci_i2c_id_table);
399 
400 static const struct acpi_device_id st_nci_i2c_acpi_match[] = {
401 	{"SMO2101"},
402 	{"SMO2102"},
403 	{}
404 };
405 MODULE_DEVICE_TABLE(acpi, st_nci_i2c_acpi_match);
406 
407 static const struct of_device_id of_st_nci_i2c_match[] = {
408 	{ .compatible = "st,st21nfcb-i2c", },
409 	{ .compatible = "st,st21nfcb_i2c", },
410 	{ .compatible = "st,st21nfcc-i2c", },
411 	{}
412 };
413 MODULE_DEVICE_TABLE(of, of_st_nci_i2c_match);
414 
415 static struct i2c_driver st_nci_i2c_driver = {
416 	.driver = {
417 		.name = ST_NCI_I2C_DRIVER_NAME,
418 		.of_match_table = of_match_ptr(of_st_nci_i2c_match),
419 		.acpi_match_table = ACPI_PTR(st_nci_i2c_acpi_match),
420 	},
421 	.probe = st_nci_i2c_probe,
422 	.id_table = st_nci_i2c_id_table,
423 	.remove = st_nci_i2c_remove,
424 };
425 module_i2c_driver(st_nci_i2c_driver);
426 
427 MODULE_LICENSE("GPL");
428 MODULE_DESCRIPTION(DRIVER_DESC);
429