1 /* 2 * I2C Link Layer for PN544 HCI based Driver 3 * 4 * Copyright (C) 2012 Intel Corporation. All rights reserved. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms and conditions of the GNU General Public License, 8 * version 2, as published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, see <http://www.gnu.org/licenses/>. 17 */ 18 19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 20 21 #include <linux/crc-ccitt.h> 22 #include <linux/module.h> 23 #include <linux/i2c.h> 24 #include <linux/acpi.h> 25 #include <linux/interrupt.h> 26 #include <linux/delay.h> 27 #include <linux/nfc.h> 28 #include <linux/firmware.h> 29 #include <linux/gpio/consumer.h> 30 31 #include <asm/unaligned.h> 32 33 #include <net/nfc/hci.h> 34 #include <net/nfc/llc.h> 35 #include <net/nfc/nfc.h> 36 37 #include "pn544.h" 38 39 #define PN544_I2C_FRAME_HEADROOM 1 40 #define PN544_I2C_FRAME_TAILROOM 2 41 42 /* GPIO names */ 43 #define PN544_GPIO_NAME_IRQ "pn544_irq" 44 #define PN544_GPIO_NAME_FW "pn544_fw" 45 #define PN544_GPIO_NAME_EN "pn544_en" 46 47 /* framing in HCI mode */ 48 #define PN544_HCI_I2C_LLC_LEN 1 49 #define PN544_HCI_I2C_LLC_CRC 2 50 #define PN544_HCI_I2C_LLC_LEN_CRC (PN544_HCI_I2C_LLC_LEN + \ 51 PN544_HCI_I2C_LLC_CRC) 52 #define PN544_HCI_I2C_LLC_MIN_SIZE (1 + PN544_HCI_I2C_LLC_LEN_CRC) 53 #define PN544_HCI_I2C_LLC_MAX_PAYLOAD 29 54 #define PN544_HCI_I2C_LLC_MAX_SIZE (PN544_HCI_I2C_LLC_LEN_CRC + 1 + \ 55 PN544_HCI_I2C_LLC_MAX_PAYLOAD) 56 57 static struct i2c_device_id pn544_hci_i2c_id_table[] = { 58 {"pn544", 0}, 59 {} 60 }; 61 62 MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table); 63 64 static const struct acpi_device_id pn544_hci_i2c_acpi_match[] = { 65 {"NXP5440", 0}, 66 {} 67 }; 68 69 MODULE_DEVICE_TABLE(acpi, pn544_hci_i2c_acpi_match); 70 71 #define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c" 72 73 /* 74 * Exposed through the 4 most significant bytes 75 * from the HCI SW_VERSION first byte, a.k.a. 76 * SW RomLib. 77 */ 78 #define PN544_HW_VARIANT_C2 0xa 79 #define PN544_HW_VARIANT_C3 0xb 80 81 #define PN544_FW_CMD_RESET 0x01 82 #define PN544_FW_CMD_WRITE 0x08 83 #define PN544_FW_CMD_CHECK 0x06 84 #define PN544_FW_CMD_SECURE_WRITE 0x0C 85 #define PN544_FW_CMD_SECURE_CHUNK_WRITE 0x0D 86 87 struct pn544_i2c_fw_frame_write { 88 u8 cmd; 89 u16 be_length; 90 u8 be_dest_addr[3]; 91 u16 be_datalen; 92 u8 data[]; 93 } __packed; 94 95 struct pn544_i2c_fw_frame_check { 96 u8 cmd; 97 u16 be_length; 98 u8 be_start_addr[3]; 99 u16 be_datalen; 100 u16 be_crc; 101 } __packed; 102 103 struct pn544_i2c_fw_frame_response { 104 u8 status; 105 u16 be_length; 106 } __packed; 107 108 struct pn544_i2c_fw_blob { 109 u32 be_size; 110 u32 be_destaddr; 111 u8 data[]; 112 }; 113 114 struct pn544_i2c_fw_secure_frame { 115 u8 cmd; 116 u16 be_datalen; 117 u8 data[]; 118 } __packed; 119 120 struct pn544_i2c_fw_secure_blob { 121 u64 header; 122 u8 data[]; 123 }; 124 125 #define PN544_FW_CMD_RESULT_TIMEOUT 0x01 126 #define PN544_FW_CMD_RESULT_BAD_CRC 0x02 127 #define PN544_FW_CMD_RESULT_ACCESS_DENIED 0x08 128 #define PN544_FW_CMD_RESULT_PROTOCOL_ERROR 0x0B 129 #define PN544_FW_CMD_RESULT_INVALID_PARAMETER 0x11 130 #define PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND 0x13 131 #define PN544_FW_CMD_RESULT_INVALID_LENGTH 0x18 132 #define PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR 0x19 133 #define PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR 0x1D 134 #define PN544_FW_CMD_RESULT_MEMORY_ERROR 0x20 135 #define PN544_FW_CMD_RESULT_CHUNK_OK 0x21 136 #define PN544_FW_CMD_RESULT_WRITE_FAILED 0x74 137 #define PN544_FW_CMD_RESULT_COMMAND_REJECTED 0xE0 138 #define PN544_FW_CMD_RESULT_CHUNK_ERROR 0xE6 139 140 #define MIN(X, Y) ((X) < (Y) ? (X) : (Y)) 141 142 #define PN544_FW_WRITE_BUFFER_MAX_LEN 0x9f7 143 #define PN544_FW_I2C_MAX_PAYLOAD PN544_HCI_I2C_LLC_MAX_SIZE 144 #define PN544_FW_I2C_WRITE_FRAME_HEADER_LEN 8 145 #define PN544_FW_I2C_WRITE_DATA_MAX_LEN MIN((PN544_FW_I2C_MAX_PAYLOAD -\ 146 PN544_FW_I2C_WRITE_FRAME_HEADER_LEN),\ 147 PN544_FW_WRITE_BUFFER_MAX_LEN) 148 #define PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN 3 149 #define PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN (PN544_FW_I2C_MAX_PAYLOAD -\ 150 PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN) 151 #define PN544_FW_SECURE_FRAME_HEADER_LEN 3 152 #define PN544_FW_SECURE_BLOB_HEADER_LEN 8 153 154 #define FW_WORK_STATE_IDLE 1 155 #define FW_WORK_STATE_START 2 156 #define FW_WORK_STATE_WAIT_WRITE_ANSWER 3 157 #define FW_WORK_STATE_WAIT_CHECK_ANSWER 4 158 #define FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER 5 159 160 struct pn544_i2c_phy { 161 struct i2c_client *i2c_dev; 162 struct nfc_hci_dev *hdev; 163 164 struct gpio_desc *gpiod_en; 165 struct gpio_desc *gpiod_fw; 166 167 unsigned int en_polarity; 168 169 u8 hw_variant; 170 171 struct work_struct fw_work; 172 int fw_work_state; 173 char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1]; 174 const struct firmware *fw; 175 u32 fw_blob_dest_addr; 176 size_t fw_blob_size; 177 const u8 *fw_blob_data; 178 size_t fw_written; 179 size_t fw_size; 180 181 int fw_cmd_result; 182 183 int powered; 184 int run_mode; 185 186 int hard_fault; /* 187 * < 0 if hardware error occured (e.g. i2c err) 188 * and prevents normal operation. 189 */ 190 }; 191 192 #define I2C_DUMP_SKB(info, skb) \ 193 do { \ 194 pr_debug("%s:\n", info); \ 195 print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \ 196 16, 1, (skb)->data, (skb)->len, 0); \ 197 } while (0) 198 199 static void pn544_hci_i2c_platform_init(struct pn544_i2c_phy *phy) 200 { 201 int polarity, retry, ret; 202 char rset_cmd[] = { 0x05, 0xF9, 0x04, 0x00, 0xC3, 0xE5 }; 203 int count = sizeof(rset_cmd); 204 205 nfc_info(&phy->i2c_dev->dev, "Detecting nfc_en polarity\n"); 206 207 /* Disable fw download */ 208 gpiod_set_value_cansleep(phy->gpiod_fw, 0); 209 210 for (polarity = 0; polarity < 2; polarity++) { 211 phy->en_polarity = polarity; 212 retry = 3; 213 while (retry--) { 214 /* power off */ 215 gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity); 216 usleep_range(10000, 15000); 217 218 /* power on */ 219 gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity); 220 usleep_range(10000, 15000); 221 222 /* send reset */ 223 dev_dbg(&phy->i2c_dev->dev, "Sending reset cmd\n"); 224 ret = i2c_master_send(phy->i2c_dev, rset_cmd, count); 225 if (ret == count) { 226 nfc_info(&phy->i2c_dev->dev, 227 "nfc_en polarity : active %s\n", 228 (polarity == 0 ? "low" : "high")); 229 goto out; 230 } 231 } 232 } 233 234 nfc_err(&phy->i2c_dev->dev, 235 "Could not detect nfc_en polarity, fallback to active high\n"); 236 237 out: 238 gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity); 239 } 240 241 static void pn544_hci_i2c_enable_mode(struct pn544_i2c_phy *phy, int run_mode) 242 { 243 gpiod_set_value_cansleep(phy->gpiod_fw, run_mode == PN544_FW_MODE ? 1 : 0); 244 gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity); 245 usleep_range(10000, 15000); 246 247 phy->run_mode = run_mode; 248 } 249 250 static int pn544_hci_i2c_enable(void *phy_id) 251 { 252 struct pn544_i2c_phy *phy = phy_id; 253 254 pr_info("%s\n", __func__); 255 256 pn544_hci_i2c_enable_mode(phy, PN544_HCI_MODE); 257 258 phy->powered = 1; 259 260 return 0; 261 } 262 263 static void pn544_hci_i2c_disable(void *phy_id) 264 { 265 struct pn544_i2c_phy *phy = phy_id; 266 267 gpiod_set_value_cansleep(phy->gpiod_fw, 0); 268 gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity); 269 usleep_range(10000, 15000); 270 271 gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity); 272 usleep_range(10000, 15000); 273 274 gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity); 275 usleep_range(10000, 15000); 276 277 phy->powered = 0; 278 } 279 280 static void pn544_hci_i2c_add_len_crc(struct sk_buff *skb) 281 { 282 u16 crc; 283 int len; 284 285 len = skb->len + 2; 286 *skb_push(skb, 1) = len; 287 288 crc = crc_ccitt(0xffff, skb->data, skb->len); 289 crc = ~crc; 290 *skb_put(skb, 1) = crc & 0xff; 291 *skb_put(skb, 1) = crc >> 8; 292 } 293 294 static void pn544_hci_i2c_remove_len_crc(struct sk_buff *skb) 295 { 296 skb_pull(skb, PN544_I2C_FRAME_HEADROOM); 297 skb_trim(skb, PN544_I2C_FRAME_TAILROOM); 298 } 299 300 /* 301 * Writing a frame must not return the number of written bytes. 302 * It must return either zero for success, or <0 for error. 303 * In addition, it must not alter the skb 304 */ 305 static int pn544_hci_i2c_write(void *phy_id, struct sk_buff *skb) 306 { 307 int r; 308 struct pn544_i2c_phy *phy = phy_id; 309 struct i2c_client *client = phy->i2c_dev; 310 311 if (phy->hard_fault != 0) 312 return phy->hard_fault; 313 314 usleep_range(3000, 6000); 315 316 pn544_hci_i2c_add_len_crc(skb); 317 318 I2C_DUMP_SKB("i2c frame written", skb); 319 320 r = i2c_master_send(client, skb->data, skb->len); 321 322 if (r == -EREMOTEIO) { /* Retry, chip was in standby */ 323 usleep_range(6000, 10000); 324 r = i2c_master_send(client, skb->data, skb->len); 325 } 326 327 if (r >= 0) { 328 if (r != skb->len) 329 r = -EREMOTEIO; 330 else 331 r = 0; 332 } 333 334 pn544_hci_i2c_remove_len_crc(skb); 335 336 return r; 337 } 338 339 static int check_crc(u8 *buf, int buflen) 340 { 341 int len; 342 u16 crc; 343 344 len = buf[0] + 1; 345 crc = crc_ccitt(0xffff, buf, len - 2); 346 crc = ~crc; 347 348 if (buf[len - 2] != (crc & 0xff) || buf[len - 1] != (crc >> 8)) { 349 pr_err("CRC error 0x%x != 0x%x 0x%x\n", 350 crc, buf[len - 1], buf[len - 2]); 351 pr_info("%s: BAD CRC\n", __func__); 352 print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE, 353 16, 2, buf, buflen, false); 354 return -EPERM; 355 } 356 return 0; 357 } 358 359 /* 360 * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees 361 * that i2c bus will be flushed and that next read will start on a new frame. 362 * returned skb contains only LLC header and payload. 363 * returns: 364 * -EREMOTEIO : i2c read error (fatal) 365 * -EBADMSG : frame was incorrect and discarded 366 * -ENOMEM : cannot allocate skb, frame dropped 367 */ 368 static int pn544_hci_i2c_read(struct pn544_i2c_phy *phy, struct sk_buff **skb) 369 { 370 int r; 371 u8 len; 372 u8 tmp[PN544_HCI_I2C_LLC_MAX_SIZE - 1]; 373 struct i2c_client *client = phy->i2c_dev; 374 375 r = i2c_master_recv(client, &len, 1); 376 if (r != 1) { 377 nfc_err(&client->dev, "cannot read len byte\n"); 378 return -EREMOTEIO; 379 } 380 381 if ((len < (PN544_HCI_I2C_LLC_MIN_SIZE - 1)) || 382 (len > (PN544_HCI_I2C_LLC_MAX_SIZE - 1))) { 383 nfc_err(&client->dev, "invalid len byte\n"); 384 r = -EBADMSG; 385 goto flush; 386 } 387 388 *skb = alloc_skb(1 + len, GFP_KERNEL); 389 if (*skb == NULL) { 390 r = -ENOMEM; 391 goto flush; 392 } 393 394 *skb_put(*skb, 1) = len; 395 396 r = i2c_master_recv(client, skb_put(*skb, len), len); 397 if (r != len) { 398 kfree_skb(*skb); 399 return -EREMOTEIO; 400 } 401 402 I2C_DUMP_SKB("i2c frame read", *skb); 403 404 r = check_crc((*skb)->data, (*skb)->len); 405 if (r != 0) { 406 kfree_skb(*skb); 407 r = -EBADMSG; 408 goto flush; 409 } 410 411 skb_pull(*skb, 1); 412 skb_trim(*skb, (*skb)->len - 2); 413 414 usleep_range(3000, 6000); 415 416 return 0; 417 418 flush: 419 if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0) 420 r = -EREMOTEIO; 421 422 usleep_range(3000, 6000); 423 424 return r; 425 } 426 427 static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy) 428 { 429 int r; 430 struct pn544_i2c_fw_frame_response response; 431 struct i2c_client *client = phy->i2c_dev; 432 433 r = i2c_master_recv(client, (char *) &response, sizeof(response)); 434 if (r != sizeof(response)) { 435 nfc_err(&client->dev, "cannot read fw status\n"); 436 return -EIO; 437 } 438 439 usleep_range(3000, 6000); 440 441 switch (response.status) { 442 case 0: 443 return 0; 444 case PN544_FW_CMD_RESULT_CHUNK_OK: 445 return response.status; 446 case PN544_FW_CMD_RESULT_TIMEOUT: 447 return -ETIMEDOUT; 448 case PN544_FW_CMD_RESULT_BAD_CRC: 449 return -ENODATA; 450 case PN544_FW_CMD_RESULT_ACCESS_DENIED: 451 return -EACCES; 452 case PN544_FW_CMD_RESULT_PROTOCOL_ERROR: 453 return -EPROTO; 454 case PN544_FW_CMD_RESULT_INVALID_PARAMETER: 455 return -EINVAL; 456 case PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND: 457 return -ENOTSUPP; 458 case PN544_FW_CMD_RESULT_INVALID_LENGTH: 459 return -EBADMSG; 460 case PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR: 461 return -ENOKEY; 462 case PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR: 463 return -EINVAL; 464 case PN544_FW_CMD_RESULT_MEMORY_ERROR: 465 return -ENOMEM; 466 case PN544_FW_CMD_RESULT_COMMAND_REJECTED: 467 return -EACCES; 468 case PN544_FW_CMD_RESULT_WRITE_FAILED: 469 case PN544_FW_CMD_RESULT_CHUNK_ERROR: 470 return -EIO; 471 default: 472 return -EIO; 473 } 474 } 475 476 /* 477 * Reads an shdlc frame from the chip. This is not as straightforward as it 478 * seems. There are cases where we could loose the frame start synchronization. 479 * The frame format is len-data-crc, and corruption can occur anywhere while 480 * transiting on i2c bus, such that we could read an invalid len. 481 * In order to recover synchronization with the next frame, we must be sure 482 * to read the real amount of data without using the len byte. We do this by 483 * assuming the following: 484 * - the chip will always present only one single complete frame on the bus 485 * before triggering the interrupt 486 * - the chip will not present a new frame until we have completely read 487 * the previous one (or until we have handled the interrupt). 488 * The tricky case is when we read a corrupted len that is less than the real 489 * len. We must detect this here in order to determine that we need to flush 490 * the bus. This is the reason why we check the crc here. 491 */ 492 static irqreturn_t pn544_hci_i2c_irq_thread_fn(int irq, void *phy_id) 493 { 494 struct pn544_i2c_phy *phy = phy_id; 495 struct i2c_client *client; 496 struct sk_buff *skb = NULL; 497 int r; 498 499 if (!phy || irq != phy->i2c_dev->irq) { 500 WARN_ON_ONCE(1); 501 return IRQ_NONE; 502 } 503 504 client = phy->i2c_dev; 505 dev_dbg(&client->dev, "IRQ\n"); 506 507 if (phy->hard_fault != 0) 508 return IRQ_HANDLED; 509 510 if (phy->run_mode == PN544_FW_MODE) { 511 phy->fw_cmd_result = pn544_hci_i2c_fw_read_status(phy); 512 schedule_work(&phy->fw_work); 513 } else { 514 r = pn544_hci_i2c_read(phy, &skb); 515 if (r == -EREMOTEIO) { 516 phy->hard_fault = r; 517 518 nfc_hci_recv_frame(phy->hdev, NULL); 519 520 return IRQ_HANDLED; 521 } else if ((r == -ENOMEM) || (r == -EBADMSG)) { 522 return IRQ_HANDLED; 523 } 524 525 nfc_hci_recv_frame(phy->hdev, skb); 526 } 527 return IRQ_HANDLED; 528 } 529 530 static struct nfc_phy_ops i2c_phy_ops = { 531 .write = pn544_hci_i2c_write, 532 .enable = pn544_hci_i2c_enable, 533 .disable = pn544_hci_i2c_disable, 534 }; 535 536 static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name, 537 u8 hw_variant) 538 { 539 struct pn544_i2c_phy *phy = phy_id; 540 541 pr_info("Starting Firmware Download (%s)\n", firmware_name); 542 543 strcpy(phy->firmware_name, firmware_name); 544 545 phy->hw_variant = hw_variant; 546 phy->fw_work_state = FW_WORK_STATE_START; 547 548 schedule_work(&phy->fw_work); 549 550 return 0; 551 } 552 553 static void pn544_hci_i2c_fw_work_complete(struct pn544_i2c_phy *phy, 554 int result) 555 { 556 pr_info("Firmware Download Complete, result=%d\n", result); 557 558 pn544_hci_i2c_disable(phy); 559 560 phy->fw_work_state = FW_WORK_STATE_IDLE; 561 562 if (phy->fw) { 563 release_firmware(phy->fw); 564 phy->fw = NULL; 565 } 566 567 nfc_fw_download_done(phy->hdev->ndev, phy->firmware_name, (u32) -result); 568 } 569 570 static int pn544_hci_i2c_fw_write_cmd(struct i2c_client *client, u32 dest_addr, 571 const u8 *data, u16 datalen) 572 { 573 u8 frame[PN544_FW_I2C_MAX_PAYLOAD]; 574 struct pn544_i2c_fw_frame_write *framep; 575 u16 params_len; 576 int framelen; 577 int r; 578 579 if (datalen > PN544_FW_I2C_WRITE_DATA_MAX_LEN) 580 datalen = PN544_FW_I2C_WRITE_DATA_MAX_LEN; 581 582 framep = (struct pn544_i2c_fw_frame_write *) frame; 583 584 params_len = sizeof(framep->be_dest_addr) + 585 sizeof(framep->be_datalen) + datalen; 586 framelen = params_len + sizeof(framep->cmd) + 587 sizeof(framep->be_length); 588 589 framep->cmd = PN544_FW_CMD_WRITE; 590 591 put_unaligned_be16(params_len, &framep->be_length); 592 593 framep->be_dest_addr[0] = (dest_addr & 0xff0000) >> 16; 594 framep->be_dest_addr[1] = (dest_addr & 0xff00) >> 8; 595 framep->be_dest_addr[2] = dest_addr & 0xff; 596 597 put_unaligned_be16(datalen, &framep->be_datalen); 598 599 memcpy(framep->data, data, datalen); 600 601 r = i2c_master_send(client, frame, framelen); 602 603 if (r == framelen) 604 return datalen; 605 else if (r < 0) 606 return r; 607 else 608 return -EIO; 609 } 610 611 static int pn544_hci_i2c_fw_check_cmd(struct i2c_client *client, u32 start_addr, 612 const u8 *data, u16 datalen) 613 { 614 struct pn544_i2c_fw_frame_check frame; 615 int r; 616 u16 crc; 617 618 /* calculate local crc for the data we want to check */ 619 crc = crc_ccitt(0xffff, data, datalen); 620 621 frame.cmd = PN544_FW_CMD_CHECK; 622 623 put_unaligned_be16(sizeof(frame.be_start_addr) + 624 sizeof(frame.be_datalen) + sizeof(frame.be_crc), 625 &frame.be_length); 626 627 /* tell the chip the memory region to which our crc applies */ 628 frame.be_start_addr[0] = (start_addr & 0xff0000) >> 16; 629 frame.be_start_addr[1] = (start_addr & 0xff00) >> 8; 630 frame.be_start_addr[2] = start_addr & 0xff; 631 632 put_unaligned_be16(datalen, &frame.be_datalen); 633 634 /* 635 * and give our local crc. Chip will calculate its own crc for the 636 * region and compare with ours. 637 */ 638 put_unaligned_be16(crc, &frame.be_crc); 639 640 r = i2c_master_send(client, (const char *) &frame, sizeof(frame)); 641 642 if (r == sizeof(frame)) 643 return 0; 644 else if (r < 0) 645 return r; 646 else 647 return -EIO; 648 } 649 650 static int pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy *phy) 651 { 652 int r; 653 654 r = pn544_hci_i2c_fw_write_cmd(phy->i2c_dev, 655 phy->fw_blob_dest_addr + phy->fw_written, 656 phy->fw_blob_data + phy->fw_written, 657 phy->fw_blob_size - phy->fw_written); 658 if (r < 0) 659 return r; 660 661 phy->fw_written += r; 662 phy->fw_work_state = FW_WORK_STATE_WAIT_WRITE_ANSWER; 663 664 return 0; 665 } 666 667 static int pn544_hci_i2c_fw_secure_write_frame_cmd(struct pn544_i2c_phy *phy, 668 const u8 *data, u16 datalen) 669 { 670 u8 buf[PN544_FW_I2C_MAX_PAYLOAD]; 671 struct pn544_i2c_fw_secure_frame *chunk; 672 int chunklen; 673 int r; 674 675 if (datalen > PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN) 676 datalen = PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN; 677 678 chunk = (struct pn544_i2c_fw_secure_frame *) buf; 679 680 chunk->cmd = PN544_FW_CMD_SECURE_CHUNK_WRITE; 681 682 put_unaligned_be16(datalen, &chunk->be_datalen); 683 684 memcpy(chunk->data, data, datalen); 685 686 chunklen = sizeof(chunk->cmd) + sizeof(chunk->be_datalen) + datalen; 687 688 r = i2c_master_send(phy->i2c_dev, buf, chunklen); 689 690 if (r == chunklen) 691 return datalen; 692 else if (r < 0) 693 return r; 694 else 695 return -EIO; 696 697 } 698 699 static int pn544_hci_i2c_fw_secure_write_frame(struct pn544_i2c_phy *phy) 700 { 701 struct pn544_i2c_fw_secure_frame *framep; 702 int r; 703 704 framep = (struct pn544_i2c_fw_secure_frame *) phy->fw_blob_data; 705 if (phy->fw_written == 0) 706 phy->fw_blob_size = get_unaligned_be16(&framep->be_datalen) 707 + PN544_FW_SECURE_FRAME_HEADER_LEN; 708 709 /* Only secure write command can be chunked*/ 710 if (phy->fw_blob_size > PN544_FW_I2C_MAX_PAYLOAD && 711 framep->cmd != PN544_FW_CMD_SECURE_WRITE) 712 return -EINVAL; 713 714 /* The firmware also have other commands, we just send them directly */ 715 if (phy->fw_blob_size < PN544_FW_I2C_MAX_PAYLOAD) { 716 r = i2c_master_send(phy->i2c_dev, 717 (const char *) phy->fw_blob_data, phy->fw_blob_size); 718 719 if (r == phy->fw_blob_size) 720 goto exit; 721 else if (r < 0) 722 return r; 723 else 724 return -EIO; 725 } 726 727 r = pn544_hci_i2c_fw_secure_write_frame_cmd(phy, 728 phy->fw_blob_data + phy->fw_written, 729 phy->fw_blob_size - phy->fw_written); 730 if (r < 0) 731 return r; 732 733 exit: 734 phy->fw_written += r; 735 phy->fw_work_state = FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER; 736 737 /* SW reset command will not trig any response from PN544 */ 738 if (framep->cmd == PN544_FW_CMD_RESET) { 739 pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE); 740 phy->fw_cmd_result = 0; 741 schedule_work(&phy->fw_work); 742 } 743 744 return 0; 745 } 746 747 static void pn544_hci_i2c_fw_work(struct work_struct *work) 748 { 749 struct pn544_i2c_phy *phy = container_of(work, struct pn544_i2c_phy, 750 fw_work); 751 int r; 752 struct pn544_i2c_fw_blob *blob; 753 struct pn544_i2c_fw_secure_blob *secure_blob; 754 755 switch (phy->fw_work_state) { 756 case FW_WORK_STATE_START: 757 pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE); 758 759 r = request_firmware(&phy->fw, phy->firmware_name, 760 &phy->i2c_dev->dev); 761 if (r < 0) 762 goto exit_state_start; 763 764 phy->fw_written = 0; 765 766 switch (phy->hw_variant) { 767 case PN544_HW_VARIANT_C2: 768 blob = (struct pn544_i2c_fw_blob *) phy->fw->data; 769 phy->fw_blob_size = get_unaligned_be32(&blob->be_size); 770 phy->fw_blob_dest_addr = get_unaligned_be32( 771 &blob->be_destaddr); 772 phy->fw_blob_data = blob->data; 773 774 r = pn544_hci_i2c_fw_write_chunk(phy); 775 break; 776 case PN544_HW_VARIANT_C3: 777 secure_blob = (struct pn544_i2c_fw_secure_blob *) 778 phy->fw->data; 779 phy->fw_blob_data = secure_blob->data; 780 phy->fw_size = phy->fw->size; 781 r = pn544_hci_i2c_fw_secure_write_frame(phy); 782 break; 783 default: 784 r = -ENOTSUPP; 785 break; 786 } 787 788 exit_state_start: 789 if (r < 0) 790 pn544_hci_i2c_fw_work_complete(phy, r); 791 break; 792 793 case FW_WORK_STATE_WAIT_WRITE_ANSWER: 794 r = phy->fw_cmd_result; 795 if (r < 0) 796 goto exit_state_wait_write_answer; 797 798 if (phy->fw_written == phy->fw_blob_size) { 799 r = pn544_hci_i2c_fw_check_cmd(phy->i2c_dev, 800 phy->fw_blob_dest_addr, 801 phy->fw_blob_data, 802 phy->fw_blob_size); 803 if (r < 0) 804 goto exit_state_wait_write_answer; 805 phy->fw_work_state = FW_WORK_STATE_WAIT_CHECK_ANSWER; 806 break; 807 } 808 809 r = pn544_hci_i2c_fw_write_chunk(phy); 810 811 exit_state_wait_write_answer: 812 if (r < 0) 813 pn544_hci_i2c_fw_work_complete(phy, r); 814 break; 815 816 case FW_WORK_STATE_WAIT_CHECK_ANSWER: 817 r = phy->fw_cmd_result; 818 if (r < 0) 819 goto exit_state_wait_check_answer; 820 821 blob = (struct pn544_i2c_fw_blob *) (phy->fw_blob_data + 822 phy->fw_blob_size); 823 phy->fw_blob_size = get_unaligned_be32(&blob->be_size); 824 if (phy->fw_blob_size != 0) { 825 phy->fw_blob_dest_addr = 826 get_unaligned_be32(&blob->be_destaddr); 827 phy->fw_blob_data = blob->data; 828 829 phy->fw_written = 0; 830 r = pn544_hci_i2c_fw_write_chunk(phy); 831 } 832 833 exit_state_wait_check_answer: 834 if (r < 0 || phy->fw_blob_size == 0) 835 pn544_hci_i2c_fw_work_complete(phy, r); 836 break; 837 838 case FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER: 839 r = phy->fw_cmd_result; 840 if (r < 0) 841 goto exit_state_wait_secure_write_answer; 842 843 if (r == PN544_FW_CMD_RESULT_CHUNK_OK) { 844 r = pn544_hci_i2c_fw_secure_write_frame(phy); 845 goto exit_state_wait_secure_write_answer; 846 } 847 848 if (phy->fw_written == phy->fw_blob_size) { 849 secure_blob = (struct pn544_i2c_fw_secure_blob *) 850 (phy->fw_blob_data + phy->fw_blob_size); 851 phy->fw_size -= phy->fw_blob_size + 852 PN544_FW_SECURE_BLOB_HEADER_LEN; 853 if (phy->fw_size >= PN544_FW_SECURE_BLOB_HEADER_LEN 854 + PN544_FW_SECURE_FRAME_HEADER_LEN) { 855 phy->fw_blob_data = secure_blob->data; 856 857 phy->fw_written = 0; 858 r = pn544_hci_i2c_fw_secure_write_frame(phy); 859 } 860 } 861 862 exit_state_wait_secure_write_answer: 863 if (r < 0 || phy->fw_size == 0) 864 pn544_hci_i2c_fw_work_complete(phy, r); 865 break; 866 867 default: 868 break; 869 } 870 } 871 872 static const struct acpi_gpio_params enable_gpios = { 1, 0, false }; 873 static const struct acpi_gpio_params firmware_gpios = { 2, 0, false }; 874 875 static const struct acpi_gpio_mapping acpi_pn544_gpios[] = { 876 { "enable-gpios", &enable_gpios, 1 }, 877 { "firmware-gpios", &firmware_gpios, 1 }, 878 { }, 879 }; 880 881 static int pn544_hci_i2c_probe(struct i2c_client *client, 882 const struct i2c_device_id *id) 883 { 884 struct device *dev = &client->dev; 885 struct pn544_i2c_phy *phy; 886 int r = 0; 887 888 dev_dbg(&client->dev, "%s\n", __func__); 889 dev_dbg(&client->dev, "IRQ: %d\n", client->irq); 890 891 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { 892 nfc_err(&client->dev, "Need I2C_FUNC_I2C\n"); 893 return -ENODEV; 894 } 895 896 phy = devm_kzalloc(&client->dev, sizeof(struct pn544_i2c_phy), 897 GFP_KERNEL); 898 if (!phy) 899 return -ENOMEM; 900 901 INIT_WORK(&phy->fw_work, pn544_hci_i2c_fw_work); 902 phy->fw_work_state = FW_WORK_STATE_IDLE; 903 904 phy->i2c_dev = client; 905 i2c_set_clientdata(client, phy); 906 907 r = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), acpi_pn544_gpios); 908 if (r) 909 dev_dbg(dev, "Unable to add GPIO mapping table\n"); 910 911 /* Get EN GPIO */ 912 phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); 913 if (IS_ERR(phy->gpiod_en)) { 914 nfc_err(dev, "Unable to get EN GPIO\n"); 915 return PTR_ERR(phy->gpiod_en); 916 } 917 918 /* Get FW GPIO */ 919 phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW); 920 if (IS_ERR(phy->gpiod_fw)) { 921 nfc_err(dev, "Unable to get FW GPIO\n"); 922 return PTR_ERR(phy->gpiod_fw); 923 } 924 925 pn544_hci_i2c_platform_init(phy); 926 927 r = devm_request_threaded_irq(&client->dev, client->irq, NULL, 928 pn544_hci_i2c_irq_thread_fn, 929 IRQF_TRIGGER_RISING | IRQF_ONESHOT, 930 PN544_HCI_I2C_DRIVER_NAME, phy); 931 if (r < 0) { 932 nfc_err(&client->dev, "Unable to register IRQ handler\n"); 933 return r; 934 } 935 936 r = pn544_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME, 937 PN544_I2C_FRAME_HEADROOM, PN544_I2C_FRAME_TAILROOM, 938 PN544_HCI_I2C_LLC_MAX_PAYLOAD, 939 pn544_hci_i2c_fw_download, &phy->hdev); 940 if (r < 0) 941 return r; 942 943 return 0; 944 } 945 946 static int pn544_hci_i2c_remove(struct i2c_client *client) 947 { 948 struct pn544_i2c_phy *phy = i2c_get_clientdata(client); 949 950 dev_dbg(&client->dev, "%s\n", __func__); 951 952 cancel_work_sync(&phy->fw_work); 953 if (phy->fw_work_state != FW_WORK_STATE_IDLE) 954 pn544_hci_i2c_fw_work_complete(phy, -ENODEV); 955 956 pn544_hci_remove(phy->hdev); 957 958 if (phy->powered) 959 pn544_hci_i2c_disable(phy); 960 961 acpi_dev_remove_driver_gpios(ACPI_COMPANION(&client->dev)); 962 return 0; 963 } 964 965 static const struct of_device_id of_pn544_i2c_match[] = { 966 { .compatible = "nxp,pn544-i2c", }, 967 {}, 968 }; 969 MODULE_DEVICE_TABLE(of, of_pn544_i2c_match); 970 971 static struct i2c_driver pn544_hci_i2c_driver = { 972 .driver = { 973 .name = PN544_HCI_I2C_DRIVER_NAME, 974 .of_match_table = of_match_ptr(of_pn544_i2c_match), 975 .acpi_match_table = ACPI_PTR(pn544_hci_i2c_acpi_match), 976 }, 977 .probe = pn544_hci_i2c_probe, 978 .id_table = pn544_hci_i2c_id_table, 979 .remove = pn544_hci_i2c_remove, 980 }; 981 982 module_i2c_driver(pn544_hci_i2c_driver); 983 984 MODULE_LICENSE("GPL"); 985 MODULE_DESCRIPTION(DRIVER_DESC); 986