1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * I2C Link Layer for PN544 HCI based Driver 4 * 5 * Copyright (C) 2012 Intel Corporation. All rights reserved. 6 */ 7 8 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 9 10 #include <linux/crc-ccitt.h> 11 #include <linux/module.h> 12 #include <linux/i2c.h> 13 #include <linux/acpi.h> 14 #include <linux/interrupt.h> 15 #include <linux/delay.h> 16 #include <linux/nfc.h> 17 #include <linux/firmware.h> 18 #include <linux/gpio/consumer.h> 19 20 #include <linux/unaligned.h> 21 22 #include <net/nfc/hci.h> 23 #include <net/nfc/llc.h> 24 #include <net/nfc/nfc.h> 25 26 #include "pn544.h" 27 28 #define PN544_I2C_FRAME_HEADROOM 1 29 #define PN544_I2C_FRAME_TAILROOM 2 30 31 /* GPIO names */ 32 #define PN544_GPIO_NAME_IRQ "pn544_irq" 33 #define PN544_GPIO_NAME_FW "pn544_fw" 34 #define PN544_GPIO_NAME_EN "pn544_en" 35 36 /* framing in HCI mode */ 37 #define PN544_HCI_I2C_LLC_LEN 1 38 #define PN544_HCI_I2C_LLC_CRC 2 39 #define PN544_HCI_I2C_LLC_LEN_CRC (PN544_HCI_I2C_LLC_LEN + \ 40 PN544_HCI_I2C_LLC_CRC) 41 #define PN544_HCI_I2C_LLC_MIN_SIZE (1 + PN544_HCI_I2C_LLC_LEN_CRC) 42 #define PN544_HCI_I2C_LLC_MAX_PAYLOAD 29 43 #define PN544_HCI_I2C_LLC_MAX_SIZE (PN544_HCI_I2C_LLC_LEN_CRC + 1 + \ 44 PN544_HCI_I2C_LLC_MAX_PAYLOAD) 45 46 static const struct i2c_device_id pn544_hci_i2c_id_table[] = { 47 { "pn544" }, 48 {} 49 }; 50 51 MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table); 52 53 static const struct acpi_device_id pn544_hci_i2c_acpi_match[] __maybe_unused = { 54 {"NXP5440", 0}, 55 {} 56 }; 57 58 MODULE_DEVICE_TABLE(acpi, pn544_hci_i2c_acpi_match); 59 60 #define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c" 61 62 /* 63 * Exposed through the 4 most significant bytes 64 * from the HCI SW_VERSION first byte, a.k.a. 65 * SW RomLib. 66 */ 67 #define PN544_HW_VARIANT_C2 0xa 68 #define PN544_HW_VARIANT_C3 0xb 69 70 #define PN544_FW_CMD_RESET 0x01 71 #define PN544_FW_CMD_WRITE 0x08 72 #define PN544_FW_CMD_CHECK 0x06 73 #define PN544_FW_CMD_SECURE_WRITE 0x0C 74 #define PN544_FW_CMD_SECURE_CHUNK_WRITE 0x0D 75 76 struct pn544_i2c_fw_frame_write { 77 u8 cmd; 78 u16 be_length; 79 u8 be_dest_addr[3]; 80 u16 be_datalen; 81 u8 data[]; 82 } __packed; 83 84 struct pn544_i2c_fw_frame_check { 85 u8 cmd; 86 u16 be_length; 87 u8 be_start_addr[3]; 88 u16 be_datalen; 89 u16 be_crc; 90 } __packed; 91 92 struct pn544_i2c_fw_frame_response { 93 u8 status; 94 u16 be_length; 95 } __packed; 96 97 struct pn544_i2c_fw_blob { 98 u32 be_size; 99 u32 be_destaddr; 100 u8 data[]; 101 }; 102 103 struct pn544_i2c_fw_secure_frame { 104 u8 cmd; 105 u16 be_datalen; 106 u8 data[]; 107 } __packed; 108 109 struct pn544_i2c_fw_secure_blob { 110 u64 header; 111 u8 data[]; 112 }; 113 114 #define PN544_FW_CMD_RESULT_TIMEOUT 0x01 115 #define PN544_FW_CMD_RESULT_BAD_CRC 0x02 116 #define PN544_FW_CMD_RESULT_ACCESS_DENIED 0x08 117 #define PN544_FW_CMD_RESULT_PROTOCOL_ERROR 0x0B 118 #define PN544_FW_CMD_RESULT_INVALID_PARAMETER 0x11 119 #define PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND 0x13 120 #define PN544_FW_CMD_RESULT_INVALID_LENGTH 0x18 121 #define PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR 0x19 122 #define PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR 0x1D 123 #define PN544_FW_CMD_RESULT_MEMORY_ERROR 0x20 124 #define PN544_FW_CMD_RESULT_CHUNK_OK 0x21 125 #define PN544_FW_CMD_RESULT_WRITE_FAILED 0x74 126 #define PN544_FW_CMD_RESULT_COMMAND_REJECTED 0xE0 127 #define PN544_FW_CMD_RESULT_CHUNK_ERROR 0xE6 128 129 #define PN544_FW_WRITE_BUFFER_MAX_LEN 0x9f7 130 #define PN544_FW_I2C_MAX_PAYLOAD PN544_HCI_I2C_LLC_MAX_SIZE 131 #define PN544_FW_I2C_WRITE_FRAME_HEADER_LEN 8 132 #define PN544_FW_I2C_WRITE_DATA_MAX_LEN MIN((PN544_FW_I2C_MAX_PAYLOAD -\ 133 PN544_FW_I2C_WRITE_FRAME_HEADER_LEN),\ 134 PN544_FW_WRITE_BUFFER_MAX_LEN) 135 #define PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN 3 136 #define PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN (PN544_FW_I2C_MAX_PAYLOAD -\ 137 PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN) 138 #define PN544_FW_SECURE_FRAME_HEADER_LEN 3 139 #define PN544_FW_SECURE_BLOB_HEADER_LEN 8 140 141 #define FW_WORK_STATE_IDLE 1 142 #define FW_WORK_STATE_START 2 143 #define FW_WORK_STATE_WAIT_WRITE_ANSWER 3 144 #define FW_WORK_STATE_WAIT_CHECK_ANSWER 4 145 #define FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER 5 146 147 struct pn544_i2c_phy { 148 struct i2c_client *i2c_dev; 149 struct nfc_hci_dev *hdev; 150 151 struct gpio_desc *gpiod_en; 152 struct gpio_desc *gpiod_fw; 153 154 unsigned int en_polarity; 155 156 u8 hw_variant; 157 158 struct work_struct fw_work; 159 int fw_work_state; 160 char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1]; 161 const struct firmware *fw; 162 u32 fw_blob_dest_addr; 163 size_t fw_blob_size; 164 const u8 *fw_blob_data; 165 size_t fw_written; 166 size_t fw_size; 167 168 int fw_cmd_result; 169 170 int powered; 171 int run_mode; 172 173 int hard_fault; /* 174 * < 0 if hardware error occured (e.g. i2c err) 175 * and prevents normal operation. 176 */ 177 }; 178 179 #define I2C_DUMP_SKB(info, skb) \ 180 do { \ 181 pr_debug("%s:\n", info); \ 182 print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \ 183 16, 1, (skb)->data, (skb)->len, 0); \ 184 } while (0) 185 186 static void pn544_hci_i2c_platform_init(struct pn544_i2c_phy *phy) 187 { 188 int polarity, retry, ret; 189 static const char rset_cmd[] = { 0x05, 0xF9, 0x04, 0x00, 0xC3, 0xE5 }; 190 int count = sizeof(rset_cmd); 191 192 nfc_info(&phy->i2c_dev->dev, "Detecting nfc_en polarity\n"); 193 194 /* Disable fw download */ 195 gpiod_set_value_cansleep(phy->gpiod_fw, 0); 196 197 for (polarity = 0; polarity < 2; polarity++) { 198 phy->en_polarity = polarity; 199 retry = 3; 200 while (retry--) { 201 /* power off */ 202 gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity); 203 usleep_range(10000, 15000); 204 205 /* power on */ 206 gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity); 207 usleep_range(10000, 15000); 208 209 /* send reset */ 210 dev_dbg(&phy->i2c_dev->dev, "Sending reset cmd\n"); 211 ret = i2c_master_send(phy->i2c_dev, rset_cmd, count); 212 if (ret == count) { 213 nfc_info(&phy->i2c_dev->dev, 214 "nfc_en polarity : active %s\n", 215 (polarity == 0 ? "low" : "high")); 216 goto out; 217 } 218 } 219 } 220 221 nfc_err(&phy->i2c_dev->dev, 222 "Could not detect nfc_en polarity, fallback to active high\n"); 223 224 out: 225 gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity); 226 usleep_range(10000, 15000); 227 } 228 229 static void pn544_hci_i2c_enable_mode(struct pn544_i2c_phy *phy, int run_mode) 230 { 231 gpiod_set_value_cansleep(phy->gpiod_fw, run_mode == PN544_FW_MODE ? 1 : 0); 232 gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity); 233 usleep_range(10000, 15000); 234 235 phy->run_mode = run_mode; 236 } 237 238 static int pn544_hci_i2c_enable(void *phy_id) 239 { 240 struct pn544_i2c_phy *phy = phy_id; 241 242 pn544_hci_i2c_enable_mode(phy, PN544_HCI_MODE); 243 244 phy->powered = 1; 245 246 return 0; 247 } 248 249 static void pn544_hci_i2c_disable(void *phy_id) 250 { 251 struct pn544_i2c_phy *phy = phy_id; 252 253 gpiod_set_value_cansleep(phy->gpiod_fw, 0); 254 gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity); 255 usleep_range(10000, 15000); 256 257 gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity); 258 usleep_range(10000, 15000); 259 260 gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity); 261 usleep_range(10000, 15000); 262 263 phy->powered = 0; 264 } 265 266 static void pn544_hci_i2c_add_len_crc(struct sk_buff *skb) 267 { 268 u16 crc; 269 int len; 270 271 len = skb->len + 2; 272 *(u8 *)skb_push(skb, 1) = len; 273 274 crc = crc_ccitt(0xffff, skb->data, skb->len); 275 crc = ~crc; 276 skb_put_u8(skb, crc & 0xff); 277 skb_put_u8(skb, crc >> 8); 278 } 279 280 static void pn544_hci_i2c_remove_len_crc(struct sk_buff *skb) 281 { 282 skb_pull(skb, PN544_I2C_FRAME_HEADROOM); 283 skb_trim(skb, PN544_I2C_FRAME_TAILROOM); 284 } 285 286 /* 287 * Writing a frame must not return the number of written bytes. 288 * It must return either zero for success, or <0 for error. 289 * In addition, it must not alter the skb 290 */ 291 static int pn544_hci_i2c_write(void *phy_id, struct sk_buff *skb) 292 { 293 int r; 294 struct pn544_i2c_phy *phy = phy_id; 295 struct i2c_client *client = phy->i2c_dev; 296 297 if (phy->hard_fault != 0) 298 return phy->hard_fault; 299 300 usleep_range(3000, 6000); 301 302 pn544_hci_i2c_add_len_crc(skb); 303 304 I2C_DUMP_SKB("i2c frame written", skb); 305 306 r = i2c_master_send(client, skb->data, skb->len); 307 308 if (r == -EREMOTEIO) { /* Retry, chip was in standby */ 309 usleep_range(6000, 10000); 310 r = i2c_master_send(client, skb->data, skb->len); 311 } 312 313 if (r >= 0) { 314 if (r != skb->len) 315 r = -EREMOTEIO; 316 else 317 r = 0; 318 } 319 320 pn544_hci_i2c_remove_len_crc(skb); 321 322 return r; 323 } 324 325 static int check_crc(u8 *buf, int buflen) 326 { 327 int len; 328 u16 crc; 329 330 len = buf[0] + 1; 331 crc = crc_ccitt(0xffff, buf, len - 2); 332 crc = ~crc; 333 334 if (buf[len - 2] != (crc & 0xff) || buf[len - 1] != (crc >> 8)) { 335 pr_err("CRC error 0x%x != 0x%x 0x%x\n", 336 crc, buf[len - 1], buf[len - 2]); 337 pr_info("%s: BAD CRC\n", __func__); 338 print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE, 339 16, 2, buf, buflen, false); 340 return -EPERM; 341 } 342 return 0; 343 } 344 345 /* 346 * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees 347 * that i2c bus will be flushed and that next read will start on a new frame. 348 * returned skb contains only LLC header and payload. 349 * returns: 350 * -EREMOTEIO : i2c read error (fatal) 351 * -EBADMSG : frame was incorrect and discarded 352 * -ENOMEM : cannot allocate skb, frame dropped 353 */ 354 static int pn544_hci_i2c_read(struct pn544_i2c_phy *phy, struct sk_buff **skb) 355 { 356 int r; 357 u8 len; 358 u8 tmp[PN544_HCI_I2C_LLC_MAX_SIZE - 1]; 359 struct i2c_client *client = phy->i2c_dev; 360 361 r = i2c_master_recv(client, &len, 1); 362 if (r != 1) { 363 nfc_err(&client->dev, "cannot read len byte\n"); 364 return -EREMOTEIO; 365 } 366 367 if ((len < (PN544_HCI_I2C_LLC_MIN_SIZE - 1)) || 368 (len > (PN544_HCI_I2C_LLC_MAX_SIZE - 1))) { 369 nfc_err(&client->dev, "invalid len byte\n"); 370 r = -EBADMSG; 371 goto flush; 372 } 373 374 *skb = alloc_skb(1 + len, GFP_KERNEL); 375 if (*skb == NULL) { 376 r = -ENOMEM; 377 goto flush; 378 } 379 380 skb_put_u8(*skb, len); 381 382 r = i2c_master_recv(client, skb_put(*skb, len), len); 383 if (r != len) { 384 kfree_skb(*skb); 385 return -EREMOTEIO; 386 } 387 388 I2C_DUMP_SKB("i2c frame read", *skb); 389 390 r = check_crc((*skb)->data, (*skb)->len); 391 if (r != 0) { 392 kfree_skb(*skb); 393 r = -EBADMSG; 394 goto flush; 395 } 396 397 skb_pull(*skb, 1); 398 skb_trim(*skb, (*skb)->len - 2); 399 400 usleep_range(3000, 6000); 401 402 return 0; 403 404 flush: 405 if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0) 406 r = -EREMOTEIO; 407 408 usleep_range(3000, 6000); 409 410 return r; 411 } 412 413 static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy) 414 { 415 int r; 416 struct pn544_i2c_fw_frame_response response; 417 struct i2c_client *client = phy->i2c_dev; 418 419 r = i2c_master_recv(client, (char *) &response, sizeof(response)); 420 if (r != sizeof(response)) { 421 nfc_err(&client->dev, "cannot read fw status\n"); 422 return -EIO; 423 } 424 425 usleep_range(3000, 6000); 426 427 switch (response.status) { 428 case 0: 429 return 0; 430 case PN544_FW_CMD_RESULT_CHUNK_OK: 431 return response.status; 432 case PN544_FW_CMD_RESULT_TIMEOUT: 433 return -ETIMEDOUT; 434 case PN544_FW_CMD_RESULT_BAD_CRC: 435 return -ENODATA; 436 case PN544_FW_CMD_RESULT_ACCESS_DENIED: 437 return -EACCES; 438 case PN544_FW_CMD_RESULT_PROTOCOL_ERROR: 439 return -EPROTO; 440 case PN544_FW_CMD_RESULT_INVALID_PARAMETER: 441 return -EINVAL; 442 case PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND: 443 return -ENOTSUPP; 444 case PN544_FW_CMD_RESULT_INVALID_LENGTH: 445 return -EBADMSG; 446 case PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR: 447 return -ENOKEY; 448 case PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR: 449 return -EINVAL; 450 case PN544_FW_CMD_RESULT_MEMORY_ERROR: 451 return -ENOMEM; 452 case PN544_FW_CMD_RESULT_COMMAND_REJECTED: 453 return -EACCES; 454 case PN544_FW_CMD_RESULT_WRITE_FAILED: 455 case PN544_FW_CMD_RESULT_CHUNK_ERROR: 456 return -EIO; 457 default: 458 return -EIO; 459 } 460 } 461 462 /* 463 * Reads an shdlc frame from the chip. This is not as straightforward as it 464 * seems. There are cases where we could loose the frame start synchronization. 465 * The frame format is len-data-crc, and corruption can occur anywhere while 466 * transiting on i2c bus, such that we could read an invalid len. 467 * In order to recover synchronization with the next frame, we must be sure 468 * to read the real amount of data without using the len byte. We do this by 469 * assuming the following: 470 * - the chip will always present only one single complete frame on the bus 471 * before triggering the interrupt 472 * - the chip will not present a new frame until we have completely read 473 * the previous one (or until we have handled the interrupt). 474 * The tricky case is when we read a corrupted len that is less than the real 475 * len. We must detect this here in order to determine that we need to flush 476 * the bus. This is the reason why we check the crc here. 477 */ 478 static irqreturn_t pn544_hci_i2c_irq_thread_fn(int irq, void *phy_id) 479 { 480 struct pn544_i2c_phy *phy = phy_id; 481 struct i2c_client *client; 482 struct sk_buff *skb = NULL; 483 int r; 484 485 if (!phy || irq != phy->i2c_dev->irq) { 486 WARN_ON_ONCE(1); 487 return IRQ_NONE; 488 } 489 490 client = phy->i2c_dev; 491 dev_dbg(&client->dev, "IRQ\n"); 492 493 if (phy->hard_fault != 0) 494 return IRQ_HANDLED; 495 496 if (phy->run_mode == PN544_FW_MODE) { 497 phy->fw_cmd_result = pn544_hci_i2c_fw_read_status(phy); 498 schedule_work(&phy->fw_work); 499 } else { 500 r = pn544_hci_i2c_read(phy, &skb); 501 if (r == -EREMOTEIO) { 502 phy->hard_fault = r; 503 504 nfc_hci_recv_frame(phy->hdev, NULL); 505 506 return IRQ_HANDLED; 507 } else if ((r == -ENOMEM) || (r == -EBADMSG)) { 508 return IRQ_HANDLED; 509 } 510 511 nfc_hci_recv_frame(phy->hdev, skb); 512 } 513 return IRQ_HANDLED; 514 } 515 516 static const struct nfc_phy_ops i2c_phy_ops = { 517 .write = pn544_hci_i2c_write, 518 .enable = pn544_hci_i2c_enable, 519 .disable = pn544_hci_i2c_disable, 520 }; 521 522 static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name, 523 u8 hw_variant) 524 { 525 struct pn544_i2c_phy *phy = phy_id; 526 527 pr_info("Starting Firmware Download (%s)\n", firmware_name); 528 529 strcpy(phy->firmware_name, firmware_name); 530 531 phy->hw_variant = hw_variant; 532 phy->fw_work_state = FW_WORK_STATE_START; 533 534 schedule_work(&phy->fw_work); 535 536 return 0; 537 } 538 539 static void pn544_hci_i2c_fw_work_complete(struct pn544_i2c_phy *phy, 540 int result) 541 { 542 pr_info("Firmware Download Complete, result=%d\n", result); 543 544 pn544_hci_i2c_disable(phy); 545 546 phy->fw_work_state = FW_WORK_STATE_IDLE; 547 548 if (phy->fw) { 549 release_firmware(phy->fw); 550 phy->fw = NULL; 551 } 552 553 nfc_fw_download_done(phy->hdev->ndev, phy->firmware_name, (u32) -result); 554 } 555 556 static int pn544_hci_i2c_fw_write_cmd(struct i2c_client *client, u32 dest_addr, 557 const u8 *data, u16 datalen) 558 { 559 u8 frame[PN544_FW_I2C_MAX_PAYLOAD]; 560 struct pn544_i2c_fw_frame_write *framep; 561 u16 params_len; 562 int framelen; 563 int r; 564 565 if (datalen > PN544_FW_I2C_WRITE_DATA_MAX_LEN) 566 datalen = PN544_FW_I2C_WRITE_DATA_MAX_LEN; 567 568 framep = (struct pn544_i2c_fw_frame_write *) frame; 569 570 params_len = sizeof(framep->be_dest_addr) + 571 sizeof(framep->be_datalen) + datalen; 572 framelen = params_len + sizeof(framep->cmd) + 573 sizeof(framep->be_length); 574 575 framep->cmd = PN544_FW_CMD_WRITE; 576 577 put_unaligned_be16(params_len, &framep->be_length); 578 579 framep->be_dest_addr[0] = (dest_addr & 0xff0000) >> 16; 580 framep->be_dest_addr[1] = (dest_addr & 0xff00) >> 8; 581 framep->be_dest_addr[2] = dest_addr & 0xff; 582 583 put_unaligned_be16(datalen, &framep->be_datalen); 584 585 memcpy(framep->data, data, datalen); 586 587 r = i2c_master_send(client, frame, framelen); 588 589 if (r == framelen) 590 return datalen; 591 else if (r < 0) 592 return r; 593 else 594 return -EIO; 595 } 596 597 static int pn544_hci_i2c_fw_check_cmd(struct i2c_client *client, u32 start_addr, 598 const u8 *data, u16 datalen) 599 { 600 struct pn544_i2c_fw_frame_check frame; 601 int r; 602 u16 crc; 603 604 /* calculate local crc for the data we want to check */ 605 crc = crc_ccitt(0xffff, data, datalen); 606 607 frame.cmd = PN544_FW_CMD_CHECK; 608 609 put_unaligned_be16(sizeof(frame.be_start_addr) + 610 sizeof(frame.be_datalen) + sizeof(frame.be_crc), 611 &frame.be_length); 612 613 /* tell the chip the memory region to which our crc applies */ 614 frame.be_start_addr[0] = (start_addr & 0xff0000) >> 16; 615 frame.be_start_addr[1] = (start_addr & 0xff00) >> 8; 616 frame.be_start_addr[2] = start_addr & 0xff; 617 618 put_unaligned_be16(datalen, &frame.be_datalen); 619 620 /* 621 * and give our local crc. Chip will calculate its own crc for the 622 * region and compare with ours. 623 */ 624 put_unaligned_be16(crc, &frame.be_crc); 625 626 r = i2c_master_send(client, (const char *) &frame, sizeof(frame)); 627 628 if (r == sizeof(frame)) 629 return 0; 630 else if (r < 0) 631 return r; 632 else 633 return -EIO; 634 } 635 636 static int pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy *phy) 637 { 638 int r; 639 640 r = pn544_hci_i2c_fw_write_cmd(phy->i2c_dev, 641 phy->fw_blob_dest_addr + phy->fw_written, 642 phy->fw_blob_data + phy->fw_written, 643 phy->fw_blob_size - phy->fw_written); 644 if (r < 0) 645 return r; 646 647 phy->fw_written += r; 648 phy->fw_work_state = FW_WORK_STATE_WAIT_WRITE_ANSWER; 649 650 return 0; 651 } 652 653 static int pn544_hci_i2c_fw_secure_write_frame_cmd(struct pn544_i2c_phy *phy, 654 const u8 *data, u16 datalen) 655 { 656 u8 buf[PN544_FW_I2C_MAX_PAYLOAD]; 657 struct pn544_i2c_fw_secure_frame *chunk; 658 int chunklen; 659 int r; 660 661 if (datalen > PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN) 662 datalen = PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN; 663 664 chunk = (struct pn544_i2c_fw_secure_frame *) buf; 665 666 chunk->cmd = PN544_FW_CMD_SECURE_CHUNK_WRITE; 667 668 put_unaligned_be16(datalen, &chunk->be_datalen); 669 670 memcpy(chunk->data, data, datalen); 671 672 chunklen = sizeof(chunk->cmd) + sizeof(chunk->be_datalen) + datalen; 673 674 r = i2c_master_send(phy->i2c_dev, buf, chunklen); 675 676 if (r == chunklen) 677 return datalen; 678 else if (r < 0) 679 return r; 680 else 681 return -EIO; 682 683 } 684 685 static int pn544_hci_i2c_fw_secure_write_frame(struct pn544_i2c_phy *phy) 686 { 687 struct pn544_i2c_fw_secure_frame *framep; 688 int r; 689 690 framep = (struct pn544_i2c_fw_secure_frame *) phy->fw_blob_data; 691 if (phy->fw_written == 0) 692 phy->fw_blob_size = get_unaligned_be16(&framep->be_datalen) 693 + PN544_FW_SECURE_FRAME_HEADER_LEN; 694 695 /* Only secure write command can be chunked*/ 696 if (phy->fw_blob_size > PN544_FW_I2C_MAX_PAYLOAD && 697 framep->cmd != PN544_FW_CMD_SECURE_WRITE) 698 return -EINVAL; 699 700 /* The firmware also have other commands, we just send them directly */ 701 if (phy->fw_blob_size < PN544_FW_I2C_MAX_PAYLOAD) { 702 r = i2c_master_send(phy->i2c_dev, 703 (const char *) phy->fw_blob_data, phy->fw_blob_size); 704 705 if (r == phy->fw_blob_size) 706 goto exit; 707 else if (r < 0) 708 return r; 709 else 710 return -EIO; 711 } 712 713 r = pn544_hci_i2c_fw_secure_write_frame_cmd(phy, 714 phy->fw_blob_data + phy->fw_written, 715 phy->fw_blob_size - phy->fw_written); 716 if (r < 0) 717 return r; 718 719 exit: 720 phy->fw_written += r; 721 phy->fw_work_state = FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER; 722 723 /* SW reset command will not trig any response from PN544 */ 724 if (framep->cmd == PN544_FW_CMD_RESET) { 725 pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE); 726 phy->fw_cmd_result = 0; 727 schedule_work(&phy->fw_work); 728 } 729 730 return 0; 731 } 732 733 static void pn544_hci_i2c_fw_work(struct work_struct *work) 734 { 735 struct pn544_i2c_phy *phy = container_of(work, struct pn544_i2c_phy, 736 fw_work); 737 int r; 738 struct pn544_i2c_fw_blob *blob; 739 struct pn544_i2c_fw_secure_blob *secure_blob; 740 741 switch (phy->fw_work_state) { 742 case FW_WORK_STATE_START: 743 pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE); 744 745 r = request_firmware(&phy->fw, phy->firmware_name, 746 &phy->i2c_dev->dev); 747 if (r < 0) 748 goto exit_state_start; 749 750 phy->fw_written = 0; 751 752 switch (phy->hw_variant) { 753 case PN544_HW_VARIANT_C2: 754 blob = (struct pn544_i2c_fw_blob *) phy->fw->data; 755 phy->fw_blob_size = get_unaligned_be32(&blob->be_size); 756 phy->fw_blob_dest_addr = get_unaligned_be32( 757 &blob->be_destaddr); 758 phy->fw_blob_data = blob->data; 759 760 r = pn544_hci_i2c_fw_write_chunk(phy); 761 break; 762 case PN544_HW_VARIANT_C3: 763 secure_blob = (struct pn544_i2c_fw_secure_blob *) 764 phy->fw->data; 765 phy->fw_blob_data = secure_blob->data; 766 phy->fw_size = phy->fw->size; 767 r = pn544_hci_i2c_fw_secure_write_frame(phy); 768 break; 769 default: 770 r = -ENOTSUPP; 771 break; 772 } 773 774 exit_state_start: 775 if (r < 0) 776 pn544_hci_i2c_fw_work_complete(phy, r); 777 break; 778 779 case FW_WORK_STATE_WAIT_WRITE_ANSWER: 780 r = phy->fw_cmd_result; 781 if (r < 0) 782 goto exit_state_wait_write_answer; 783 784 if (phy->fw_written == phy->fw_blob_size) { 785 r = pn544_hci_i2c_fw_check_cmd(phy->i2c_dev, 786 phy->fw_blob_dest_addr, 787 phy->fw_blob_data, 788 phy->fw_blob_size); 789 if (r < 0) 790 goto exit_state_wait_write_answer; 791 phy->fw_work_state = FW_WORK_STATE_WAIT_CHECK_ANSWER; 792 break; 793 } 794 795 r = pn544_hci_i2c_fw_write_chunk(phy); 796 797 exit_state_wait_write_answer: 798 if (r < 0) 799 pn544_hci_i2c_fw_work_complete(phy, r); 800 break; 801 802 case FW_WORK_STATE_WAIT_CHECK_ANSWER: 803 r = phy->fw_cmd_result; 804 if (r < 0) 805 goto exit_state_wait_check_answer; 806 807 blob = (struct pn544_i2c_fw_blob *) (phy->fw_blob_data + 808 phy->fw_blob_size); 809 phy->fw_blob_size = get_unaligned_be32(&blob->be_size); 810 if (phy->fw_blob_size != 0) { 811 phy->fw_blob_dest_addr = 812 get_unaligned_be32(&blob->be_destaddr); 813 phy->fw_blob_data = blob->data; 814 815 phy->fw_written = 0; 816 r = pn544_hci_i2c_fw_write_chunk(phy); 817 } 818 819 exit_state_wait_check_answer: 820 if (r < 0 || phy->fw_blob_size == 0) 821 pn544_hci_i2c_fw_work_complete(phy, r); 822 break; 823 824 case FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER: 825 r = phy->fw_cmd_result; 826 if (r < 0) 827 goto exit_state_wait_secure_write_answer; 828 829 if (r == PN544_FW_CMD_RESULT_CHUNK_OK) { 830 r = pn544_hci_i2c_fw_secure_write_frame(phy); 831 goto exit_state_wait_secure_write_answer; 832 } 833 834 if (phy->fw_written == phy->fw_blob_size) { 835 secure_blob = (struct pn544_i2c_fw_secure_blob *) 836 (phy->fw_blob_data + phy->fw_blob_size); 837 phy->fw_size -= phy->fw_blob_size + 838 PN544_FW_SECURE_BLOB_HEADER_LEN; 839 if (phy->fw_size >= PN544_FW_SECURE_BLOB_HEADER_LEN 840 + PN544_FW_SECURE_FRAME_HEADER_LEN) { 841 phy->fw_blob_data = secure_blob->data; 842 843 phy->fw_written = 0; 844 r = pn544_hci_i2c_fw_secure_write_frame(phy); 845 } 846 } 847 848 exit_state_wait_secure_write_answer: 849 if (r < 0 || phy->fw_size == 0) 850 pn544_hci_i2c_fw_work_complete(phy, r); 851 break; 852 853 default: 854 break; 855 } 856 } 857 858 static const struct acpi_gpio_params enable_gpios = { 1, 0, false }; 859 static const struct acpi_gpio_params firmware_gpios = { 2, 0, false }; 860 861 static const struct acpi_gpio_mapping acpi_pn544_gpios[] = { 862 { "enable-gpios", &enable_gpios, 1 }, 863 { "firmware-gpios", &firmware_gpios, 1 }, 864 { }, 865 }; 866 867 static int pn544_hci_i2c_probe(struct i2c_client *client) 868 { 869 struct device *dev = &client->dev; 870 struct pn544_i2c_phy *phy; 871 int r = 0; 872 873 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { 874 nfc_err(&client->dev, "Need I2C_FUNC_I2C\n"); 875 return -ENODEV; 876 } 877 878 phy = devm_kzalloc(&client->dev, sizeof(struct pn544_i2c_phy), 879 GFP_KERNEL); 880 if (!phy) 881 return -ENOMEM; 882 883 INIT_WORK(&phy->fw_work, pn544_hci_i2c_fw_work); 884 phy->fw_work_state = FW_WORK_STATE_IDLE; 885 886 phy->i2c_dev = client; 887 i2c_set_clientdata(client, phy); 888 889 r = devm_acpi_dev_add_driver_gpios(dev, acpi_pn544_gpios); 890 if (r) 891 dev_dbg(dev, "Unable to add GPIO mapping table\n"); 892 893 /* Get EN GPIO */ 894 phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); 895 if (IS_ERR(phy->gpiod_en)) { 896 nfc_err(dev, "Unable to get EN GPIO\n"); 897 return PTR_ERR(phy->gpiod_en); 898 } 899 900 /* Get FW GPIO */ 901 phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW); 902 if (IS_ERR(phy->gpiod_fw)) { 903 nfc_err(dev, "Unable to get FW GPIO\n"); 904 return PTR_ERR(phy->gpiod_fw); 905 } 906 907 pn544_hci_i2c_platform_init(phy); 908 909 r = devm_request_threaded_irq(&client->dev, client->irq, NULL, 910 pn544_hci_i2c_irq_thread_fn, 911 IRQF_TRIGGER_RISING | IRQF_ONESHOT, 912 PN544_HCI_I2C_DRIVER_NAME, phy); 913 if (r < 0) { 914 nfc_err(&client->dev, "Unable to register IRQ handler\n"); 915 return r; 916 } 917 918 r = pn544_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME, 919 PN544_I2C_FRAME_HEADROOM, PN544_I2C_FRAME_TAILROOM, 920 PN544_HCI_I2C_LLC_MAX_PAYLOAD, 921 pn544_hci_i2c_fw_download, &phy->hdev); 922 if (r < 0) 923 return r; 924 925 return 0; 926 } 927 928 static void pn544_hci_i2c_remove(struct i2c_client *client) 929 { 930 struct pn544_i2c_phy *phy = i2c_get_clientdata(client); 931 932 cancel_work_sync(&phy->fw_work); 933 if (phy->fw_work_state != FW_WORK_STATE_IDLE) 934 pn544_hci_i2c_fw_work_complete(phy, -ENODEV); 935 936 pn544_hci_remove(phy->hdev); 937 938 if (phy->powered) 939 pn544_hci_i2c_disable(phy); 940 } 941 942 static const struct of_device_id of_pn544_i2c_match[] __maybe_unused = { 943 { .compatible = "nxp,pn544-i2c", }, 944 {}, 945 }; 946 MODULE_DEVICE_TABLE(of, of_pn544_i2c_match); 947 948 static struct i2c_driver pn544_hci_i2c_driver = { 949 .driver = { 950 .name = PN544_HCI_I2C_DRIVER_NAME, 951 .of_match_table = of_match_ptr(of_pn544_i2c_match), 952 .acpi_match_table = ACPI_PTR(pn544_hci_i2c_acpi_match), 953 }, 954 .probe = pn544_hci_i2c_probe, 955 .id_table = pn544_hci_i2c_id_table, 956 .remove = pn544_hci_i2c_remove, 957 }; 958 959 module_i2c_driver(pn544_hci_i2c_driver); 960 961 MODULE_LICENSE("GPL"); 962 MODULE_DESCRIPTION(DRIVER_DESC); 963