xref: /linux/drivers/net/wireless/ti/wl1251/rx.h (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  * This file is part of wl1251
3  *
4  * Copyright (c) 1998-2007 Texas Instruments Incorporated
5  * Copyright (C) 2008 Nokia Corporation
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License
9  * version 2 as published by the Free Software Foundation.
10  *
11  * This program is distributed in the hope that it will be useful, but
12  * WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
14  * General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
19  * 02110-1301 USA
20  *
21  */
22 
23 #ifndef __WL1251_RX_H__
24 #define __WL1251_RX_H__
25 
26 #include <linux/bitops.h>
27 
28 #include "wl1251.h"
29 
30 /*
31  * RX PATH
32  *
33  * The Rx path uses a double buffer and an rx_contro structure, each located
34  * at a fixed address in the device memory. The host keeps track of which
35  * buffer is available and alternates between them on a per packet basis.
36  * The size of each of the two buffers is large enough to hold the longest
37  * 802.3 packet.
38  * The RX path goes like that:
39  * 1) The target generates an interrupt each time a new packet is received.
40  *   There are 2 RX interrupts, one for each buffer.
41  * 2) The host reads the received packet from one of the double buffers.
42  * 3) The host triggers a target interrupt.
43  * 4) The target prepares the next RX packet.
44  */
45 
46 #define WL1251_RX_MAX_RSSI -30
47 #define WL1251_RX_MIN_RSSI -95
48 
49 #define WL1251_RX_ALIGN_TO 4
50 #define WL1251_RX_ALIGN(len) (((len) + WL1251_RX_ALIGN_TO - 1) & \
51 			     ~(WL1251_RX_ALIGN_TO - 1))
52 
53 #define SHORT_PREAMBLE_BIT   BIT(0)
54 #define OFDM_RATE_BIT        BIT(6)
55 #define PBCC_RATE_BIT        BIT(7)
56 
57 #define PLCP_HEADER_LENGTH 8
58 #define RX_DESC_PACKETID_SHIFT 11
59 #define RX_MAX_PACKET_ID 3
60 
61 #define RX_DESC_VALID_FCS         0x0001
62 #define RX_DESC_MATCH_RXADDR1     0x0002
63 #define RX_DESC_MCAST             0x0004
64 #define RX_DESC_STAINTIM          0x0008
65 #define RX_DESC_VIRTUAL_BM        0x0010
66 #define RX_DESC_BCAST             0x0020
67 #define RX_DESC_MATCH_SSID        0x0040
68 #define RX_DESC_MATCH_BSSID       0x0080
69 #define RX_DESC_ENCRYPTION_MASK   0x0300
70 #define RX_DESC_MEASURMENT        0x0400
71 #define RX_DESC_SEQNUM_MASK       0x1800
72 #define	RX_DESC_MIC_FAIL	  0x2000
73 #define	RX_DESC_DECRYPT_FAIL	  0x4000
74 
75 struct wl1251_rx_descriptor {
76 	u32 timestamp; /* In microseconds */
77 	u16 length; /* Paylod length, including headers */
78 	u16 flags;
79 
80 	/*
81 	 * 0 - 802.11
82 	 * 1 - 802.3
83 	 * 2 - IP
84 	 * 3 - Raw Codec
85 	 */
86 	u8 type;
87 
88 	/*
89 	 * Received Rate:
90 	 * 0x0A - 1MBPS
91 	 * 0x14 - 2MBPS
92 	 * 0x37 - 5_5MBPS
93 	 * 0x0B - 6MBPS
94 	 * 0x0F - 9MBPS
95 	 * 0x6E - 11MBPS
96 	 * 0x0A - 12MBPS
97 	 * 0x0E - 18MBPS
98 	 * 0xDC - 22MBPS
99 	 * 0x09 - 24MBPS
100 	 * 0x0D - 36MBPS
101 	 * 0x08 - 48MBPS
102 	 * 0x0C - 54MBPS
103 	 */
104 	u8 rate;
105 
106 	u8 mod_pre; /* Modulation and preamble */
107 	u8 channel;
108 
109 	/*
110 	 * 0 - 2.4 Ghz
111 	 * 1 - 5 Ghz
112 	 */
113 	u8 band;
114 
115 	s8 rssi; /* in dB */
116 	u8 rcpi; /* in dB */
117 	u8 snr; /* in dB */
118 } __packed;
119 
120 void wl1251_rx(struct wl1251 *wl);
121 
122 #endif
123