1 /* 2 * Copyright (c) 2014 Redpine Signals Inc. 3 * 4 * Permission to use, copy, modify, and/or distribute this software for any 5 * purpose with or without fee is hereby granted, provided that the above 6 * copyright notice and this permission notice appear in all copies. 7 * 8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 15 * 16 */ 17 18 #include <linux/module.h> 19 #include "rsi_sdio.h" 20 #include "rsi_common.h" 21 #include "rsi_coex.h" 22 #include "rsi_hal.h" 23 24 /* Default operating mode is wlan STA + BT */ 25 static u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; 26 module_param(dev_oper_mode, ushort, 0444); 27 MODULE_PARM_DESC(dev_oper_mode, DEV_OPMODE_PARAM_DESC); 28 29 /** 30 * rsi_sdio_set_cmd52_arg() - This function prepares cmd 52 read/write arg. 31 * @rw: Read/write 32 * @func: function number 33 * @raw: indicates whether to perform read after write 34 * @address: address to which to read/write 35 * @writedata: data to write 36 * 37 * Return: argument 38 */ 39 static u32 rsi_sdio_set_cmd52_arg(bool rw, 40 u8 func, 41 u8 raw, 42 u32 address, 43 u8 writedata) 44 { 45 return ((rw & 1) << 31) | ((func & 0x7) << 28) | 46 ((raw & 1) << 27) | (1 << 26) | 47 ((address & 0x1FFFF) << 9) | (1 << 8) | 48 (writedata & 0xFF); 49 } 50 51 /** 52 * rsi_cmd52writebyte() - This function issues cmd52 byte write onto the card. 53 * @card: Pointer to the mmc_card. 54 * @address: Address to write. 55 * @byte: Data to write. 56 * 57 * Return: Write status. 58 */ 59 static int rsi_cmd52writebyte(struct mmc_card *card, 60 u32 address, 61 u8 byte) 62 { 63 struct mmc_command io_cmd; 64 u32 arg; 65 66 memset(&io_cmd, 0, sizeof(io_cmd)); 67 arg = rsi_sdio_set_cmd52_arg(1, 0, 0, address, byte); 68 io_cmd.opcode = SD_IO_RW_DIRECT; 69 io_cmd.arg = arg; 70 io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; 71 72 return mmc_wait_for_cmd(card->host, &io_cmd, 0); 73 } 74 75 /** 76 * rsi_cmd52readbyte() - This function issues cmd52 byte read onto the card. 77 * @card: Pointer to the mmc_card. 78 * @address: Address to read from. 79 * @byte: Variable to store read value. 80 * 81 * Return: Read status. 82 */ 83 static int rsi_cmd52readbyte(struct mmc_card *card, 84 u32 address, 85 u8 *byte) 86 { 87 struct mmc_command io_cmd; 88 u32 arg; 89 int err; 90 91 memset(&io_cmd, 0, sizeof(io_cmd)); 92 arg = rsi_sdio_set_cmd52_arg(0, 0, 0, address, 0); 93 io_cmd.opcode = SD_IO_RW_DIRECT; 94 io_cmd.arg = arg; 95 io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; 96 97 err = mmc_wait_for_cmd(card->host, &io_cmd, 0); 98 if ((!err) && (byte)) 99 *byte = io_cmd.resp[0] & 0xFF; 100 return err; 101 } 102 103 /** 104 * rsi_issue_sdiocommand() - This function issues sdio commands. 105 * @func: Pointer to the sdio_func structure. 106 * @opcode: Opcode value. 107 * @arg: Arguments to pass. 108 * @flags: Flags which are set. 109 * @resp: Pointer to store response. 110 * 111 * Return: err: command status as 0 or -1. 112 */ 113 static int rsi_issue_sdiocommand(struct sdio_func *func, 114 u32 opcode, 115 u32 arg, 116 u32 flags, 117 u32 *resp) 118 { 119 struct mmc_command cmd; 120 struct mmc_host *host; 121 int err; 122 123 host = func->card->host; 124 125 memset(&cmd, 0, sizeof(struct mmc_command)); 126 cmd.opcode = opcode; 127 cmd.arg = arg; 128 cmd.flags = flags; 129 err = mmc_wait_for_cmd(host, &cmd, 3); 130 131 if ((!err) && (resp)) 132 *resp = cmd.resp[0]; 133 134 return err; 135 } 136 137 /** 138 * rsi_handle_interrupt() - This function is called upon the occurrence 139 * of an interrupt. 140 * @function: Pointer to the sdio_func structure. 141 * 142 * Return: None. 143 */ 144 static void rsi_handle_interrupt(struct sdio_func *function) 145 { 146 struct rsi_hw *adapter = sdio_get_drvdata(function); 147 struct rsi_91x_sdiodev *dev = adapter->rsi_dev; 148 149 if (adapter->priv->fsm_state == FSM_FW_NOT_LOADED) 150 return; 151 152 rsi_set_event(&dev->rx_thread.event); 153 } 154 155 /** 156 * rsi_reset_card() - This function resets and re-initializes the card. 157 * @pfunction: Pointer to the sdio_func structure. 158 * 159 * Return: None. 160 */ 161 static void rsi_reset_card(struct sdio_func *pfunction) 162 { 163 int ret = 0; 164 int err; 165 struct mmc_card *card = pfunction->card; 166 struct mmc_host *host = card->host; 167 u8 cmd52_resp; 168 u32 clock, resp, i; 169 u16 rca; 170 171 /* Reset 9110 chip */ 172 ret = rsi_cmd52writebyte(pfunction->card, 173 SDIO_CCCR_ABORT, 174 (1 << 3)); 175 176 /* Card will not send any response as it is getting reset immediately 177 * Hence expect a timeout status from host controller 178 */ 179 if (ret != -ETIMEDOUT) 180 rsi_dbg(ERR_ZONE, "%s: Reset failed : %d\n", __func__, ret); 181 182 /* Wait for few milli seconds to get rid of residue charges if any */ 183 msleep(20); 184 185 /* Initialize the SDIO card */ 186 host->ios.chip_select = MMC_CS_DONTCARE; 187 host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; 188 host->ios.power_mode = MMC_POWER_UP; 189 host->ios.bus_width = MMC_BUS_WIDTH_1; 190 host->ios.timing = MMC_TIMING_LEGACY; 191 host->ops->set_ios(host, &host->ios); 192 193 /* 194 * This delay should be sufficient to allow the power supply 195 * to reach the minimum voltage. 196 */ 197 msleep(20); 198 199 host->ios.clock = host->f_min; 200 host->ios.power_mode = MMC_POWER_ON; 201 host->ops->set_ios(host, &host->ios); 202 203 /* 204 * This delay must be at least 74 clock sizes, or 1 ms, or the 205 * time required to reach a stable voltage. 206 */ 207 msleep(20); 208 209 /* Issue CMD0. Goto idle state */ 210 host->ios.chip_select = MMC_CS_HIGH; 211 host->ops->set_ios(host, &host->ios); 212 msleep(20); 213 err = rsi_issue_sdiocommand(pfunction, 214 MMC_GO_IDLE_STATE, 215 0, 216 (MMC_RSP_NONE | MMC_CMD_BC), 217 NULL); 218 host->ios.chip_select = MMC_CS_DONTCARE; 219 host->ops->set_ios(host, &host->ios); 220 msleep(20); 221 host->use_spi_crc = 0; 222 223 if (err) 224 rsi_dbg(ERR_ZONE, "%s: CMD0 failed : %d\n", __func__, err); 225 226 /* Issue CMD5, arg = 0 */ 227 err = rsi_issue_sdiocommand(pfunction, SD_IO_SEND_OP_COND, 0, 228 (MMC_RSP_R4 | MMC_CMD_BCR), &resp); 229 if (err) 230 rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n", 231 __func__, err); 232 card->ocr = resp; 233 /* Issue CMD5, arg = ocr. Wait till card is ready */ 234 for (i = 0; i < 100; i++) { 235 err = rsi_issue_sdiocommand(pfunction, SD_IO_SEND_OP_COND, 236 card->ocr, 237 (MMC_RSP_R4 | MMC_CMD_BCR), &resp); 238 if (err) { 239 rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n", 240 __func__, err); 241 break; 242 } 243 244 if (resp & MMC_CARD_BUSY) 245 break; 246 msleep(20); 247 } 248 249 if ((i == 100) || (err)) { 250 rsi_dbg(ERR_ZONE, "%s: card in not ready : %d %d\n", 251 __func__, i, err); 252 return; 253 } 254 255 /* Issue CMD3, get RCA */ 256 err = rsi_issue_sdiocommand(pfunction, 257 SD_SEND_RELATIVE_ADDR, 258 0, 259 (MMC_RSP_R6 | MMC_CMD_BCR), 260 &resp); 261 if (err) { 262 rsi_dbg(ERR_ZONE, "%s: CMD3 failed : %d\n", __func__, err); 263 return; 264 } 265 rca = resp >> 16; 266 host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; 267 host->ops->set_ios(host, &host->ios); 268 269 /* Issue CMD7, select card */ 270 err = rsi_issue_sdiocommand(pfunction, 271 MMC_SELECT_CARD, 272 (rca << 16), 273 (MMC_RSP_R1 | MMC_CMD_AC), 274 NULL); 275 if (err) { 276 rsi_dbg(ERR_ZONE, "%s: CMD7 failed : %d\n", __func__, err); 277 return; 278 } 279 280 /* Enable high speed */ 281 if (card->host->caps & MMC_CAP_SD_HIGHSPEED) { 282 rsi_dbg(ERR_ZONE, "%s: Set high speed mode\n", __func__); 283 err = rsi_cmd52readbyte(card, SDIO_CCCR_SPEED, &cmd52_resp); 284 if (err) { 285 rsi_dbg(ERR_ZONE, "%s: CCCR speed reg read failed: %d\n", 286 __func__, err); 287 } else { 288 err = rsi_cmd52writebyte(card, 289 SDIO_CCCR_SPEED, 290 (cmd52_resp | SDIO_SPEED_EHS)); 291 if (err) { 292 rsi_dbg(ERR_ZONE, 293 "%s: CCR speed regwrite failed %d\n", 294 __func__, err); 295 return; 296 } 297 host->ios.timing = MMC_TIMING_SD_HS; 298 host->ops->set_ios(host, &host->ios); 299 } 300 } 301 302 /* Set clock */ 303 if (mmc_card_hs(card)) 304 clock = 50000000; 305 else 306 clock = card->cis.max_dtr; 307 308 if (clock > host->f_max) 309 clock = host->f_max; 310 311 host->ios.clock = clock; 312 host->ops->set_ios(host, &host->ios); 313 314 if (card->host->caps & MMC_CAP_4_BIT_DATA) { 315 /* CMD52: Set bus width & disable card detect resistor */ 316 err = rsi_cmd52writebyte(card, 317 SDIO_CCCR_IF, 318 (SDIO_BUS_CD_DISABLE | 319 SDIO_BUS_WIDTH_4BIT)); 320 if (err) { 321 rsi_dbg(ERR_ZONE, "%s: Set bus mode failed : %d\n", 322 __func__, err); 323 return; 324 } 325 host->ios.bus_width = MMC_BUS_WIDTH_4; 326 host->ops->set_ios(host, &host->ios); 327 } 328 } 329 330 /** 331 * rsi_setclock() - This function sets the clock frequency. 332 * @adapter: Pointer to the adapter structure. 333 * @freq: Clock frequency. 334 * 335 * Return: None. 336 */ 337 static void rsi_setclock(struct rsi_hw *adapter, u32 freq) 338 { 339 struct rsi_91x_sdiodev *dev = adapter->rsi_dev; 340 struct mmc_host *host = dev->pfunction->card->host; 341 u32 clock; 342 343 clock = freq * 1000; 344 if (clock > host->f_max) 345 clock = host->f_max; 346 host->ios.clock = clock; 347 host->ops->set_ios(host, &host->ios); 348 } 349 350 /** 351 * rsi_setblocklength() - This function sets the host block length. 352 * @adapter: Pointer to the adapter structure. 353 * @length: Block length to be set. 354 * 355 * Return: status: 0 on success, -1 on failure. 356 */ 357 static int rsi_setblocklength(struct rsi_hw *adapter, u32 length) 358 { 359 struct rsi_91x_sdiodev *dev = adapter->rsi_dev; 360 int status; 361 rsi_dbg(INIT_ZONE, "%s: Setting the block length\n", __func__); 362 363 status = sdio_set_block_size(dev->pfunction, length); 364 dev->pfunction->max_blksize = 256; 365 adapter->block_size = dev->pfunction->max_blksize; 366 367 rsi_dbg(INFO_ZONE, 368 "%s: Operational blk length is %d\n", __func__, length); 369 return status; 370 } 371 372 /** 373 * rsi_setupcard() - This function queries and sets the card's features. 374 * @adapter: Pointer to the adapter structure. 375 * 376 * Return: status: 0 on success, -1 on failure. 377 */ 378 static int rsi_setupcard(struct rsi_hw *adapter) 379 { 380 struct rsi_91x_sdiodev *dev = adapter->rsi_dev; 381 int status = 0; 382 383 rsi_setclock(adapter, 50000); 384 385 dev->tx_blk_size = 256; 386 status = rsi_setblocklength(adapter, dev->tx_blk_size); 387 if (status) 388 rsi_dbg(ERR_ZONE, 389 "%s: Unable to set block length\n", __func__); 390 return status; 391 } 392 393 /** 394 * rsi_sdio_read_register() - This function reads one byte of information 395 * from a register. 396 * @adapter: Pointer to the adapter structure. 397 * @addr: Address of the register. 398 * @data: Pointer to the data that stores the data read. 399 * 400 * Return: 0 on success, -1 on failure. 401 */ 402 int rsi_sdio_read_register(struct rsi_hw *adapter, 403 u32 addr, 404 u8 *data) 405 { 406 struct rsi_91x_sdiodev *dev = adapter->rsi_dev; 407 u8 fun_num = 0; 408 int status; 409 410 if (likely(dev->sdio_irq_task != current)) 411 sdio_claim_host(dev->pfunction); 412 413 if (fun_num == 0) 414 *data = sdio_f0_readb(dev->pfunction, addr, &status); 415 else 416 *data = sdio_readb(dev->pfunction, addr, &status); 417 418 if (likely(dev->sdio_irq_task != current)) 419 sdio_release_host(dev->pfunction); 420 421 return status; 422 } 423 424 /** 425 * rsi_sdio_write_register() - This function writes one byte of information 426 * into a register. 427 * @adapter: Pointer to the adapter structure. 428 * @function: Function Number. 429 * @addr: Address of the register. 430 * @data: Pointer to the data tha has to be written. 431 * 432 * Return: 0 on success, -1 on failure. 433 */ 434 int rsi_sdio_write_register(struct rsi_hw *adapter, 435 u8 function, 436 u32 addr, 437 u8 *data) 438 { 439 struct rsi_91x_sdiodev *dev = adapter->rsi_dev; 440 int status = 0; 441 442 if (likely(dev->sdio_irq_task != current)) 443 sdio_claim_host(dev->pfunction); 444 445 if (function == 0) 446 sdio_f0_writeb(dev->pfunction, *data, addr, &status); 447 else 448 sdio_writeb(dev->pfunction, *data, addr, &status); 449 450 if (likely(dev->sdio_irq_task != current)) 451 sdio_release_host(dev->pfunction); 452 453 return status; 454 } 455 456 /** 457 * rsi_sdio_ack_intr() - This function acks the interrupt received. 458 * @adapter: Pointer to the adapter structure. 459 * @int_bit: Interrupt bit to write into register. 460 * 461 * Return: None. 462 */ 463 void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit) 464 { 465 int status; 466 status = rsi_sdio_write_register(adapter, 467 1, 468 (SDIO_FUN1_INTR_CLR_REG | 469 RSI_SD_REQUEST_MASTER), 470 &int_bit); 471 if (status) 472 rsi_dbg(ERR_ZONE, "%s: unable to send ack\n", __func__); 473 } 474 475 476 477 /** 478 * rsi_sdio_read_register_multiple() - This function read multiple bytes of 479 * information from the SD card. 480 * @adapter: Pointer to the adapter structure. 481 * @addr: Address of the register. 482 * @count: Number of multiple bytes to be read. 483 * @data: Pointer to the read data. 484 * 485 * Return: 0 on success, -1 on failure. 486 */ 487 static int rsi_sdio_read_register_multiple(struct rsi_hw *adapter, 488 u32 addr, 489 u8 *data, 490 u16 count) 491 { 492 struct rsi_91x_sdiodev *dev = adapter->rsi_dev; 493 u32 status; 494 495 if (likely(dev->sdio_irq_task != current)) 496 sdio_claim_host(dev->pfunction); 497 498 status = sdio_readsb(dev->pfunction, data, addr, count); 499 500 if (likely(dev->sdio_irq_task != current)) 501 sdio_release_host(dev->pfunction); 502 503 if (status != 0) 504 rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 read failed\n", __func__); 505 return status; 506 } 507 508 /** 509 * rsi_sdio_write_register_multiple() - This function writes multiple bytes of 510 * information to the SD card. 511 * @adapter: Pointer to the adapter structure. 512 * @addr: Address of the register. 513 * @data: Pointer to the data that has to be written. 514 * @count: Number of multiple bytes to be written. 515 * 516 * Return: 0 on success, -1 on failure. 517 */ 518 int rsi_sdio_write_register_multiple(struct rsi_hw *adapter, 519 u32 addr, 520 u8 *data, 521 u16 count) 522 { 523 struct rsi_91x_sdiodev *dev = adapter->rsi_dev; 524 int status; 525 526 if (dev->write_fail > 1) { 527 rsi_dbg(ERR_ZONE, "%s: Stopping card writes\n", __func__); 528 return 0; 529 } else if (dev->write_fail == 1) { 530 /** 531 * Assuming it is a CRC failure, we want to allow another 532 * card write 533 */ 534 rsi_dbg(ERR_ZONE, "%s: Continue card writes\n", __func__); 535 dev->write_fail++; 536 } 537 538 if (likely(dev->sdio_irq_task != current)) 539 sdio_claim_host(dev->pfunction); 540 541 status = sdio_writesb(dev->pfunction, addr, data, count); 542 543 if (likely(dev->sdio_irq_task != current)) 544 sdio_release_host(dev->pfunction); 545 546 if (status) { 547 rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 write failed %d\n", 548 __func__, status); 549 dev->write_fail = 2; 550 } else { 551 memcpy(dev->prev_desc, data, FRAME_DESC_SZ); 552 } 553 return status; 554 } 555 556 static int rsi_sdio_load_data_master_write(struct rsi_hw *adapter, 557 u32 base_address, 558 u32 instructions_sz, 559 u16 block_size, 560 u8 *ta_firmware) 561 { 562 u32 num_blocks, offset, i; 563 u16 msb_address, lsb_address; 564 u8 *temp_buf; 565 int status; 566 567 num_blocks = instructions_sz / block_size; 568 msb_address = base_address >> 16; 569 570 rsi_dbg(INFO_ZONE, "ins_size: %d, num_blocks: %d\n", 571 instructions_sz, num_blocks); 572 573 temp_buf = kmalloc(block_size, GFP_KERNEL); 574 if (!temp_buf) 575 return -ENOMEM; 576 577 /* Loading DM ms word in the sdio slave */ 578 status = rsi_sdio_master_access_msword(adapter, msb_address); 579 if (status < 0) { 580 rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n", __func__); 581 goto out_free; 582 } 583 584 for (offset = 0, i = 0; i < num_blocks; i++, offset += block_size) { 585 memcpy(temp_buf, ta_firmware + offset, block_size); 586 lsb_address = (u16)base_address; 587 status = rsi_sdio_write_register_multiple 588 (adapter, 589 lsb_address | RSI_SD_REQUEST_MASTER, 590 temp_buf, block_size); 591 if (status < 0) { 592 rsi_dbg(ERR_ZONE, "%s: failed to write\n", __func__); 593 goto out_free; 594 } 595 rsi_dbg(INFO_ZONE, "%s: loading block: %d\n", __func__, i); 596 base_address += block_size; 597 598 if ((base_address >> 16) != msb_address) { 599 msb_address += 1; 600 601 /* Loading DM ms word in the sdio slave */ 602 status = rsi_sdio_master_access_msword(adapter, 603 msb_address); 604 if (status < 0) { 605 rsi_dbg(ERR_ZONE, 606 "%s: Unable to set ms word reg\n", 607 __func__); 608 goto out_free; 609 } 610 } 611 } 612 613 if (instructions_sz % block_size) { 614 memset(temp_buf, 0, block_size); 615 memcpy(temp_buf, ta_firmware + offset, 616 instructions_sz % block_size); 617 lsb_address = (u16)base_address; 618 status = rsi_sdio_write_register_multiple 619 (adapter, 620 lsb_address | RSI_SD_REQUEST_MASTER, 621 temp_buf, 622 instructions_sz % block_size); 623 if (status < 0) 624 goto out_free; 625 rsi_dbg(INFO_ZONE, 626 "Written Last Block in Address 0x%x Successfully\n", 627 offset | RSI_SD_REQUEST_MASTER); 628 } 629 630 status = 0; 631 out_free: 632 kfree(temp_buf); 633 return status; 634 } 635 636 #define FLASH_SIZE_ADDR 0x04000016 637 static int rsi_sdio_master_reg_read(struct rsi_hw *adapter, u32 addr, 638 u32 *read_buf, u16 size) 639 { 640 u32 addr_on_bus, *data; 641 u16 ms_addr; 642 int status; 643 644 data = kzalloc(RSI_MASTER_REG_BUF_SIZE, GFP_KERNEL); 645 if (!data) 646 return -ENOMEM; 647 648 ms_addr = (addr >> 16); 649 status = rsi_sdio_master_access_msword(adapter, ms_addr); 650 if (status < 0) { 651 rsi_dbg(ERR_ZONE, 652 "%s: Unable to set ms word to common reg\n", 653 __func__); 654 goto err; 655 } 656 addr &= 0xFFFF; 657 658 addr_on_bus = (addr & 0xFF000000); 659 if ((addr_on_bus == (FLASH_SIZE_ADDR & 0xFF000000)) || 660 (addr_on_bus == 0x0)) 661 addr_on_bus = (addr & ~(0x3)); 662 else 663 addr_on_bus = addr; 664 665 /* Bring TA out of reset */ 666 status = rsi_sdio_read_register_multiple 667 (adapter, 668 (addr_on_bus | RSI_SD_REQUEST_MASTER), 669 (u8 *)data, 4); 670 if (status < 0) { 671 rsi_dbg(ERR_ZONE, "%s: AHB register read failed\n", __func__); 672 goto err; 673 } 674 if (size == 2) { 675 if ((addr & 0x3) == 0) 676 *read_buf = *data; 677 else 678 *read_buf = (*data >> 16); 679 *read_buf = (*read_buf & 0xFFFF); 680 } else if (size == 1) { 681 if ((addr & 0x3) == 0) 682 *read_buf = *data; 683 else if ((addr & 0x3) == 1) 684 *read_buf = (*data >> 8); 685 else if ((addr & 0x3) == 2) 686 *read_buf = (*data >> 16); 687 else 688 *read_buf = (*data >> 24); 689 *read_buf = (*read_buf & 0xFF); 690 } else { 691 *read_buf = *data; 692 } 693 694 err: 695 kfree(data); 696 return status; 697 } 698 699 static int rsi_sdio_master_reg_write(struct rsi_hw *adapter, 700 unsigned long addr, 701 unsigned long data, u16 size) 702 { 703 unsigned long *data_aligned; 704 int status; 705 706 data_aligned = kzalloc(RSI_MASTER_REG_BUF_SIZE, GFP_KERNEL); 707 if (!data_aligned) 708 return -ENOMEM; 709 710 if (size == 2) { 711 *data_aligned = ((data << 16) | (data & 0xFFFF)); 712 } else if (size == 1) { 713 u32 temp_data = data & 0xFF; 714 715 *data_aligned = ((temp_data << 24) | (temp_data << 16) | 716 (temp_data << 8) | temp_data); 717 } else { 718 *data_aligned = data; 719 } 720 size = 4; 721 722 status = rsi_sdio_master_access_msword(adapter, (addr >> 16)); 723 if (status < 0) { 724 rsi_dbg(ERR_ZONE, 725 "%s: Unable to set ms word to common reg\n", 726 __func__); 727 kfree(data_aligned); 728 return -EIO; 729 } 730 addr = addr & 0xFFFF; 731 732 /* Bring TA out of reset */ 733 status = rsi_sdio_write_register_multiple 734 (adapter, 735 (addr | RSI_SD_REQUEST_MASTER), 736 (u8 *)data_aligned, size); 737 if (status < 0) 738 rsi_dbg(ERR_ZONE, 739 "%s: Unable to do AHB reg write\n", __func__); 740 741 kfree(data_aligned); 742 return status; 743 } 744 745 /** 746 * rsi_sdio_host_intf_write_pkt() - This function writes the packet to device. 747 * @adapter: Pointer to the adapter structure. 748 * @pkt: Pointer to the data to be written on to the device. 749 * @len: length of the data to be written on to the device. 750 * 751 * Return: 0 on success, -1 on failure. 752 */ 753 static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter, 754 u8 *pkt, 755 u32 len) 756 { 757 struct rsi_91x_sdiodev *dev = adapter->rsi_dev; 758 u32 block_size = dev->tx_blk_size; 759 u32 num_blocks, address, length; 760 u32 queueno; 761 int status; 762 763 queueno = ((pkt[1] >> 4) & 0xf); 764 if (queueno == RSI_BT_MGMT_Q || queueno == RSI_BT_DATA_Q) 765 queueno = RSI_BT_Q; 766 767 num_blocks = len / block_size; 768 769 if (len % block_size) 770 num_blocks++; 771 772 address = (num_blocks * block_size | (queueno << 12)); 773 length = num_blocks * block_size; 774 775 status = rsi_sdio_write_register_multiple(adapter, 776 address, 777 (u8 *)pkt, 778 length); 779 if (status) 780 rsi_dbg(ERR_ZONE, "%s: Unable to write onto the card: %d\n", 781 __func__, status); 782 rsi_dbg(DATA_TX_ZONE, "%s: Successfully written onto card\n", __func__); 783 return status; 784 } 785 786 /** 787 * rsi_sdio_host_intf_read_pkt() - This function reads the packet 788 * from the device. 789 * @adapter: Pointer to the adapter data structure. 790 * @pkt: Pointer to the packet data to be read from the device. 791 * @length: Length of the data to be read from the device. 792 * 793 * Return: 0 on success, -1 on failure. 794 */ 795 int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, 796 u8 *pkt, 797 u32 length) 798 { 799 int status = -EINVAL; 800 801 if (!length) { 802 rsi_dbg(ERR_ZONE, "%s: Pkt size is zero\n", __func__); 803 return status; 804 } 805 806 status = rsi_sdio_read_register_multiple(adapter, 807 length, 808 (u8 *)pkt, 809 length); /*num of bytes*/ 810 811 if (status) 812 rsi_dbg(ERR_ZONE, "%s: Failed to read frame: %d\n", __func__, 813 status); 814 return status; 815 } 816 817 /** 818 * rsi_init_sdio_interface() - This function does init specific to SDIO. 819 * 820 * @adapter: Pointer to the adapter data structure. 821 * @pfunction: Pointer to the sdio_func structure. 822 * 823 * Return: 0 on success, -1 on failure. 824 */ 825 static int rsi_init_sdio_interface(struct rsi_hw *adapter, 826 struct sdio_func *pfunction) 827 { 828 struct rsi_91x_sdiodev *rsi_91x_dev; 829 int status; 830 831 rsi_91x_dev = kzalloc(sizeof(*rsi_91x_dev), GFP_KERNEL); 832 if (!rsi_91x_dev) 833 return -ENOMEM; 834 835 adapter->rsi_dev = rsi_91x_dev; 836 837 sdio_claim_host(pfunction); 838 839 pfunction->enable_timeout = 100; 840 status = sdio_enable_func(pfunction); 841 if (status) { 842 rsi_dbg(ERR_ZONE, "%s: Failed to enable interface\n", __func__); 843 sdio_release_host(pfunction); 844 return status; 845 } 846 847 rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__); 848 849 rsi_91x_dev->pfunction = pfunction; 850 adapter->device = &pfunction->dev; 851 852 sdio_set_drvdata(pfunction, adapter); 853 854 status = rsi_setupcard(adapter); 855 if (status) { 856 rsi_dbg(ERR_ZONE, "%s: Failed to setup card\n", __func__); 857 goto fail; 858 } 859 860 rsi_dbg(INIT_ZONE, "%s: Setup card successfully\n", __func__); 861 862 status = rsi_init_sdio_slave_regs(adapter); 863 if (status) { 864 rsi_dbg(ERR_ZONE, "%s: Failed to init slave regs\n", __func__); 865 goto fail; 866 } 867 sdio_release_host(pfunction); 868 869 adapter->determine_event_timeout = rsi_sdio_determine_event_timeout; 870 adapter->check_hw_queue_status = rsi_sdio_check_buffer_status; 871 872 #ifdef CONFIG_RSI_DEBUGFS 873 adapter->num_debugfs_entries = MAX_DEBUGFS_ENTRIES; 874 #endif 875 return 0; 876 fail: 877 sdio_disable_func(pfunction); 878 sdio_release_host(pfunction); 879 return status; 880 } 881 882 static int rsi_sdio_reinit_device(struct rsi_hw *adapter) 883 { 884 struct rsi_91x_sdiodev *sdev = adapter->rsi_dev; 885 struct sdio_func *pfunction = sdev->pfunction; 886 int ii; 887 888 for (ii = 0; ii < NUM_SOFT_QUEUES; ii++) 889 skb_queue_purge(&adapter->priv->tx_queue[ii]); 890 891 /* Initialize device again */ 892 sdio_claim_host(pfunction); 893 894 sdio_release_irq(pfunction); 895 rsi_reset_card(pfunction); 896 897 sdio_enable_func(pfunction); 898 rsi_setupcard(adapter); 899 rsi_init_sdio_slave_regs(adapter); 900 sdio_claim_irq(pfunction, rsi_handle_interrupt); 901 rsi_hal_device_init(adapter); 902 903 sdio_release_host(pfunction); 904 905 return 0; 906 } 907 908 static int rsi_sdio_ta_reset(struct rsi_hw *adapter) 909 { 910 int status; 911 u32 addr; 912 u8 *data; 913 914 data = kzalloc(RSI_9116_REG_SIZE, GFP_KERNEL); 915 if (!data) 916 return -ENOMEM; 917 918 status = rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR); 919 if (status < 0) { 920 rsi_dbg(ERR_ZONE, 921 "Unable to set ms word to common reg\n"); 922 goto err; 923 } 924 925 rsi_dbg(INIT_ZONE, "%s: Bring TA out of reset\n", __func__); 926 put_unaligned_le32(TA_HOLD_THREAD_VALUE, data); 927 addr = TA_HOLD_THREAD_REG | RSI_SD_REQUEST_MASTER; 928 status = rsi_sdio_write_register_multiple(adapter, addr, 929 (u8 *)data, 930 RSI_9116_REG_SIZE); 931 if (status < 0) { 932 rsi_dbg(ERR_ZONE, "Unable to hold TA threads\n"); 933 goto err; 934 } 935 936 put_unaligned_le32(TA_SOFT_RST_CLR, data); 937 addr = TA_SOFT_RESET_REG | RSI_SD_REQUEST_MASTER; 938 status = rsi_sdio_write_register_multiple(adapter, addr, 939 (u8 *)data, 940 RSI_9116_REG_SIZE); 941 if (status < 0) { 942 rsi_dbg(ERR_ZONE, "Unable to get TA out of reset\n"); 943 goto err; 944 } 945 946 put_unaligned_le32(TA_PC_ZERO, data); 947 addr = TA_TH0_PC_REG | RSI_SD_REQUEST_MASTER; 948 status = rsi_sdio_write_register_multiple(adapter, addr, 949 (u8 *)data, 950 RSI_9116_REG_SIZE); 951 if (status < 0) { 952 rsi_dbg(ERR_ZONE, "Unable to Reset TA PC value\n"); 953 status = -EINVAL; 954 goto err; 955 } 956 957 put_unaligned_le32(TA_RELEASE_THREAD_VALUE, data); 958 addr = TA_RELEASE_THREAD_REG | RSI_SD_REQUEST_MASTER; 959 status = rsi_sdio_write_register_multiple(adapter, addr, 960 (u8 *)data, 961 RSI_9116_REG_SIZE); 962 if (status < 0) { 963 rsi_dbg(ERR_ZONE, "Unable to release TA threads\n"); 964 goto err; 965 } 966 967 status = rsi_sdio_master_access_msword(adapter, MISC_CFG_BASE_ADDR); 968 if (status < 0) { 969 rsi_dbg(ERR_ZONE, "Unable to set ms word to common reg\n"); 970 goto err; 971 } 972 rsi_dbg(INIT_ZONE, "***** TA Reset done *****\n"); 973 974 err: 975 kfree(data); 976 return status; 977 } 978 979 static struct rsi_host_intf_ops sdio_host_intf_ops = { 980 .write_pkt = rsi_sdio_host_intf_write_pkt, 981 .read_pkt = rsi_sdio_host_intf_read_pkt, 982 .master_access_msword = rsi_sdio_master_access_msword, 983 .read_reg_multiple = rsi_sdio_read_register_multiple, 984 .write_reg_multiple = rsi_sdio_write_register_multiple, 985 .master_reg_read = rsi_sdio_master_reg_read, 986 .master_reg_write = rsi_sdio_master_reg_write, 987 .load_data_master_write = rsi_sdio_load_data_master_write, 988 .reinit_device = rsi_sdio_reinit_device, 989 .ta_reset = rsi_sdio_ta_reset, 990 }; 991 992 /** 993 * rsi_probe() - This function is called by kernel when the driver provided 994 * Vendor and device IDs are matched. All the initialization 995 * work is done here. 996 * @pfunction: Pointer to the sdio_func structure. 997 * @id: Pointer to sdio_device_id structure. 998 * 999 * Return: 0 on success, 1 on failure. 1000 */ 1001 static int rsi_probe(struct sdio_func *pfunction, 1002 const struct sdio_device_id *id) 1003 { 1004 struct rsi_hw *adapter; 1005 struct rsi_91x_sdiodev *sdev; 1006 int status = -EINVAL; 1007 1008 rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__); 1009 1010 adapter = rsi_91x_init(dev_oper_mode); 1011 if (!adapter) { 1012 rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n", 1013 __func__); 1014 return -EINVAL; 1015 } 1016 adapter->rsi_host_intf = RSI_HOST_INTF_SDIO; 1017 adapter->host_intf_ops = &sdio_host_intf_ops; 1018 1019 if (rsi_init_sdio_interface(adapter, pfunction)) { 1020 rsi_dbg(ERR_ZONE, "%s: Failed to init sdio interface\n", 1021 __func__); 1022 status = -EIO; 1023 goto fail_free_adapter; 1024 } 1025 1026 if (pfunction->device == SDIO_DEVICE_ID_RSI_9113) { 1027 rsi_dbg(ERR_ZONE, "%s: 9113 module detected\n", __func__); 1028 adapter->device_model = RSI_DEV_9113; 1029 } else if (pfunction->device == SDIO_DEVICE_ID_RSI_9116) { 1030 rsi_dbg(ERR_ZONE, "%s: 9116 module detected\n", __func__); 1031 adapter->device_model = RSI_DEV_9116; 1032 } else { 1033 rsi_dbg(ERR_ZONE, 1034 "%s: Unsupported RSI device id 0x%x\n", __func__, 1035 pfunction->device); 1036 goto fail_free_adapter; 1037 } 1038 1039 sdev = adapter->rsi_dev; 1040 rsi_init_event(&sdev->rx_thread.event); 1041 status = rsi_create_kthread(adapter->priv, &sdev->rx_thread, 1042 rsi_sdio_rx_thread, "SDIO-RX-Thread"); 1043 if (status) { 1044 rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__); 1045 goto fail_kill_thread; 1046 } 1047 1048 sdio_claim_host(pfunction); 1049 if (sdio_claim_irq(pfunction, rsi_handle_interrupt)) { 1050 rsi_dbg(ERR_ZONE, "%s: Failed to request IRQ\n", __func__); 1051 sdio_release_host(pfunction); 1052 status = -EIO; 1053 goto fail_claim_irq; 1054 } 1055 sdio_release_host(pfunction); 1056 rsi_dbg(INIT_ZONE, "%s: Registered Interrupt handler\n", __func__); 1057 1058 if (rsi_hal_device_init(adapter)) { 1059 rsi_dbg(ERR_ZONE, "%s: Failed in device init\n", __func__); 1060 status = -EINVAL; 1061 goto fail_dev_init; 1062 } 1063 rsi_dbg(INFO_ZONE, "===> RSI Device Init Done <===\n"); 1064 1065 if (rsi_sdio_master_access_msword(adapter, MISC_CFG_BASE_ADDR)) { 1066 rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n", __func__); 1067 status = -EIO; 1068 goto fail_dev_init; 1069 } 1070 1071 adapter->priv->hibernate_resume = false; 1072 adapter->priv->reinit_hw = false; 1073 return 0; 1074 1075 fail_dev_init: 1076 sdio_claim_host(pfunction); 1077 sdio_release_irq(pfunction); 1078 sdio_release_host(pfunction); 1079 fail_claim_irq: 1080 rsi_kill_thread(&sdev->rx_thread); 1081 fail_kill_thread: 1082 sdio_claim_host(pfunction); 1083 sdio_disable_func(pfunction); 1084 sdio_release_host(pfunction); 1085 fail_free_adapter: 1086 rsi_91x_deinit(adapter); 1087 rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__); 1088 return status; 1089 } 1090 1091 static void ulp_read_write(struct rsi_hw *adapter, u16 addr, u32 data, 1092 u16 len_in_bits) 1093 { 1094 rsi_sdio_master_reg_write(adapter, RSI_GSPI_DATA_REG1, 1095 ((addr << 6) | ((data >> 16) & 0xffff)), 2); 1096 rsi_sdio_master_reg_write(adapter, RSI_GSPI_DATA_REG0, 1097 (data & 0xffff), 2); 1098 rsi_sdio_master_reg_write(adapter, RSI_GSPI_CTRL_REG0, 1099 RSI_GSPI_CTRL_REG0_VALUE, 2); 1100 rsi_sdio_master_reg_write(adapter, RSI_GSPI_CTRL_REG1, 1101 ((len_in_bits - 1) | RSI_GSPI_TRIG), 2); 1102 msleep(20); 1103 } 1104 1105 /*This function resets and re-initializes the chip.*/ 1106 static void rsi_reset_chip(struct rsi_hw *adapter) 1107 { 1108 u8 *data; 1109 u8 sdio_interrupt_status = 0; 1110 u8 request = 1; 1111 int ret; 1112 1113 data = kzalloc(sizeof(u32), GFP_KERNEL); 1114 if (!data) 1115 return; 1116 1117 rsi_dbg(INFO_ZONE, "Writing disable to wakeup register\n"); 1118 ret = rsi_sdio_write_register(adapter, 0, SDIO_WAKEUP_REG, &request); 1119 if (ret < 0) { 1120 rsi_dbg(ERR_ZONE, 1121 "%s: Failed to write SDIO wakeup register\n", __func__); 1122 goto err; 1123 } 1124 msleep(20); 1125 ret = rsi_sdio_read_register(adapter, RSI_FN1_INT_REGISTER, 1126 &sdio_interrupt_status); 1127 if (ret < 0) { 1128 rsi_dbg(ERR_ZONE, "%s: Failed to Read Intr Status Register\n", 1129 __func__); 1130 goto err; 1131 } 1132 rsi_dbg(INFO_ZONE, "%s: Intr Status Register value = %d\n", 1133 __func__, sdio_interrupt_status); 1134 1135 /* Put Thread-Arch processor on hold */ 1136 if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) { 1137 rsi_dbg(ERR_ZONE, 1138 "%s: Unable to set ms word to common reg\n", 1139 __func__); 1140 goto err; 1141 } 1142 1143 put_unaligned_le32(TA_HOLD_THREAD_VALUE, data); 1144 if (rsi_sdio_write_register_multiple(adapter, TA_HOLD_THREAD_REG | 1145 RSI_SD_REQUEST_MASTER, 1146 data, 4)) { 1147 rsi_dbg(ERR_ZONE, 1148 "%s: Unable to hold Thread-Arch processor threads\n", 1149 __func__); 1150 goto err; 1151 } 1152 1153 /* This msleep will ensure Thread-Arch processor to go to hold 1154 * and any pending dma transfers to rf spi in device to finish. 1155 */ 1156 msleep(100); 1157 if (adapter->device_model != RSI_DEV_9116) { 1158 ulp_read_write(adapter, RSI_ULP_RESET_REG, RSI_ULP_WRITE_0, 32); 1159 ulp_read_write(adapter, 1160 RSI_WATCH_DOG_TIMER_1, RSI_ULP_WRITE_2, 32); 1161 ulp_read_write(adapter, RSI_WATCH_DOG_TIMER_2, RSI_ULP_WRITE_0, 1162 32); 1163 ulp_read_write(adapter, RSI_WATCH_DOG_DELAY_TIMER_1, 1164 RSI_ULP_WRITE_50, 32); 1165 ulp_read_write(adapter, RSI_WATCH_DOG_DELAY_TIMER_2, 1166 RSI_ULP_WRITE_0, 32); 1167 ulp_read_write(adapter, RSI_WATCH_DOG_TIMER_ENABLE, 1168 RSI_ULP_TIMER_ENABLE, 32); 1169 } else { 1170 if ((rsi_sdio_master_reg_write(adapter, 1171 NWP_WWD_INTERRUPT_TIMER, 1172 NWP_WWD_INT_TIMER_CLKS, 1173 RSI_9116_REG_SIZE)) < 0) { 1174 rsi_dbg(ERR_ZONE, "Failed to write to intr timer\n"); 1175 } 1176 if ((rsi_sdio_master_reg_write(adapter, 1177 NWP_WWD_SYSTEM_RESET_TIMER, 1178 NWP_WWD_SYS_RESET_TIMER_CLKS, 1179 RSI_9116_REG_SIZE)) < 0) { 1180 rsi_dbg(ERR_ZONE, 1181 "Failed to write to system reset timer\n"); 1182 } 1183 if ((rsi_sdio_master_reg_write(adapter, 1184 NWP_WWD_MODE_AND_RSTART, 1185 NWP_WWD_TIMER_DISABLE, 1186 RSI_9116_REG_SIZE)) < 0) { 1187 rsi_dbg(ERR_ZONE, 1188 "Failed to write to mode and restart\n"); 1189 } 1190 rsi_dbg(ERR_ZONE, "***** Watch Dog Reset Successful *****\n"); 1191 } 1192 /* This msleep will be sufficient for the ulp 1193 * read write operations to complete for chip reset. 1194 */ 1195 msleep(500); 1196 err: 1197 kfree(data); 1198 return; 1199 } 1200 1201 /** 1202 * rsi_disconnect() - This function performs the reverse of the probe function. 1203 * @pfunction: Pointer to the sdio_func structure. 1204 * 1205 * Return: void. 1206 */ 1207 static void rsi_disconnect(struct sdio_func *pfunction) 1208 { 1209 struct rsi_hw *adapter = sdio_get_drvdata(pfunction); 1210 struct rsi_91x_sdiodev *dev; 1211 1212 if (!adapter) 1213 return; 1214 1215 dev = adapter->rsi_dev; 1216 1217 rsi_kill_thread(&dev->rx_thread); 1218 sdio_claim_host(pfunction); 1219 sdio_release_irq(pfunction); 1220 sdio_release_host(pfunction); 1221 mdelay(10); 1222 1223 rsi_mac80211_detach(adapter); 1224 mdelay(10); 1225 1226 if (IS_ENABLED(CONFIG_RSI_COEX) && adapter->priv->coex_mode > 1 && 1227 adapter->priv->bt_adapter) { 1228 rsi_bt_ops.detach(adapter->priv->bt_adapter); 1229 adapter->priv->bt_adapter = NULL; 1230 } 1231 1232 /* Reset Chip */ 1233 rsi_reset_chip(adapter); 1234 1235 /* Resetting to take care of the case, where-in driver is re-loaded */ 1236 sdio_claim_host(pfunction); 1237 rsi_reset_card(pfunction); 1238 sdio_disable_func(pfunction); 1239 sdio_release_host(pfunction); 1240 dev->write_fail = 2; 1241 rsi_91x_deinit(adapter); 1242 rsi_dbg(ERR_ZONE, "##### RSI SDIO device disconnected #####\n"); 1243 1244 } 1245 1246 #ifdef CONFIG_PM 1247 static int rsi_set_sdio_pm_caps(struct rsi_hw *adapter) 1248 { 1249 struct rsi_91x_sdiodev *dev = adapter->rsi_dev; 1250 struct sdio_func *func = dev->pfunction; 1251 int ret; 1252 1253 ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); 1254 if (ret) 1255 rsi_dbg(ERR_ZONE, "Set sdio keep pwr flag failed: %d\n", ret); 1256 1257 return ret; 1258 } 1259 1260 static int rsi_sdio_disable_interrupts(struct sdio_func *pfunc) 1261 { 1262 struct rsi_hw *adapter = sdio_get_drvdata(pfunc); 1263 u8 isr_status = 0, data = 0; 1264 int ret; 1265 unsigned long t1; 1266 1267 rsi_dbg(INFO_ZONE, "Waiting for interrupts to be cleared.."); 1268 t1 = jiffies; 1269 do { 1270 rsi_sdio_read_register(adapter, RSI_FN1_INT_REGISTER, 1271 &isr_status); 1272 rsi_dbg(INFO_ZONE, "."); 1273 } while ((isr_status) && (jiffies_to_msecs(jiffies - t1) < 20)); 1274 rsi_dbg(INFO_ZONE, "Interrupts cleared\n"); 1275 1276 sdio_claim_host(pfunc); 1277 ret = rsi_cmd52readbyte(pfunc->card, RSI_INT_ENABLE_REGISTER, &data); 1278 if (ret < 0) { 1279 rsi_dbg(ERR_ZONE, 1280 "%s: Failed to read int enable register\n", 1281 __func__); 1282 goto done; 1283 } 1284 1285 data &= RSI_INT_ENABLE_MASK; 1286 ret = rsi_cmd52writebyte(pfunc->card, RSI_INT_ENABLE_REGISTER, data); 1287 if (ret < 0) { 1288 rsi_dbg(ERR_ZONE, 1289 "%s: Failed to write to int enable register\n", 1290 __func__); 1291 goto done; 1292 } 1293 ret = rsi_cmd52readbyte(pfunc->card, RSI_INT_ENABLE_REGISTER, &data); 1294 if (ret < 0) { 1295 rsi_dbg(ERR_ZONE, 1296 "%s: Failed to read int enable register\n", 1297 __func__); 1298 goto done; 1299 } 1300 rsi_dbg(INFO_ZONE, "int enable reg content = %x\n", data); 1301 1302 done: 1303 sdio_release_host(pfunc); 1304 return ret; 1305 } 1306 1307 static int rsi_sdio_enable_interrupts(struct sdio_func *pfunc) 1308 { 1309 u8 data; 1310 int ret; 1311 struct rsi_hw *adapter = sdio_get_drvdata(pfunc); 1312 struct rsi_common *common = adapter->priv; 1313 1314 sdio_claim_host(pfunc); 1315 ret = rsi_cmd52readbyte(pfunc->card, RSI_INT_ENABLE_REGISTER, &data); 1316 if (ret < 0) { 1317 rsi_dbg(ERR_ZONE, 1318 "%s: Failed to read int enable register\n", __func__); 1319 goto done; 1320 } 1321 1322 data |= ~RSI_INT_ENABLE_MASK & 0xff; 1323 1324 ret = rsi_cmd52writebyte(pfunc->card, RSI_INT_ENABLE_REGISTER, data); 1325 if (ret < 0) { 1326 rsi_dbg(ERR_ZONE, 1327 "%s: Failed to write to int enable register\n", 1328 __func__); 1329 goto done; 1330 } 1331 1332 if ((common->wow_flags & RSI_WOW_ENABLED) && 1333 (common->wow_flags & RSI_WOW_NO_CONNECTION)) 1334 rsi_dbg(ERR_ZONE, 1335 "##### Device can not wake up through WLAN\n"); 1336 1337 ret = rsi_cmd52readbyte(pfunc->card, RSI_INT_ENABLE_REGISTER, &data); 1338 if (ret < 0) { 1339 rsi_dbg(ERR_ZONE, 1340 "%s: Failed to read int enable register\n", __func__); 1341 goto done; 1342 } 1343 rsi_dbg(INFO_ZONE, "int enable reg content = %x\n", data); 1344 1345 done: 1346 sdio_release_host(pfunc); 1347 return ret; 1348 } 1349 1350 static int rsi_suspend(struct device *dev) 1351 { 1352 int ret; 1353 struct sdio_func *pfunction = dev_to_sdio_func(dev); 1354 struct rsi_hw *adapter = sdio_get_drvdata(pfunction); 1355 struct rsi_common *common; 1356 1357 if (!adapter) { 1358 rsi_dbg(ERR_ZONE, "Device is not ready\n"); 1359 return -ENODEV; 1360 } 1361 common = adapter->priv; 1362 rsi_sdio_disable_interrupts(pfunction); 1363 1364 ret = rsi_set_sdio_pm_caps(adapter); 1365 if (ret) 1366 rsi_dbg(INFO_ZONE, 1367 "Setting power management caps failed\n"); 1368 common->fsm_state = FSM_CARD_NOT_READY; 1369 1370 return 0; 1371 } 1372 1373 static int rsi_resume(struct device *dev) 1374 { 1375 struct sdio_func *pfunction = dev_to_sdio_func(dev); 1376 struct rsi_hw *adapter = sdio_get_drvdata(pfunction); 1377 struct rsi_common *common = adapter->priv; 1378 1379 common->fsm_state = FSM_MAC_INIT_DONE; 1380 rsi_sdio_enable_interrupts(pfunction); 1381 1382 return 0; 1383 } 1384 1385 static int rsi_freeze(struct device *dev) 1386 { 1387 int ret; 1388 struct sdio_func *pfunction = dev_to_sdio_func(dev); 1389 struct rsi_hw *adapter = sdio_get_drvdata(pfunction); 1390 struct rsi_common *common; 1391 struct rsi_91x_sdiodev *sdev; 1392 1393 rsi_dbg(INFO_ZONE, "SDIO Bus freeze ===>\n"); 1394 1395 if (!adapter) { 1396 rsi_dbg(ERR_ZONE, "Device is not ready\n"); 1397 return -ENODEV; 1398 } 1399 common = adapter->priv; 1400 sdev = adapter->rsi_dev; 1401 1402 if ((common->wow_flags & RSI_WOW_ENABLED) && 1403 (common->wow_flags & RSI_WOW_NO_CONNECTION)) 1404 rsi_dbg(ERR_ZONE, 1405 "##### Device can not wake up through WLAN\n"); 1406 1407 if (IS_ENABLED(CONFIG_RSI_COEX) && common->coex_mode > 1 && 1408 common->bt_adapter) { 1409 rsi_bt_ops.detach(common->bt_adapter); 1410 common->bt_adapter = NULL; 1411 } 1412 1413 ret = rsi_sdio_disable_interrupts(pfunction); 1414 1415 if (sdev->write_fail) 1416 rsi_dbg(INFO_ZONE, "###### Device is not ready #######\n"); 1417 1418 ret = rsi_set_sdio_pm_caps(adapter); 1419 if (ret) 1420 rsi_dbg(INFO_ZONE, "Setting power management caps failed\n"); 1421 1422 rsi_dbg(INFO_ZONE, "***** RSI module freezed *****\n"); 1423 1424 return 0; 1425 } 1426 1427 static int rsi_thaw(struct device *dev) 1428 { 1429 struct sdio_func *pfunction = dev_to_sdio_func(dev); 1430 struct rsi_hw *adapter = sdio_get_drvdata(pfunction); 1431 struct rsi_common *common = adapter->priv; 1432 1433 rsi_dbg(ERR_ZONE, "SDIO Bus thaw =====>\n"); 1434 1435 common->hibernate_resume = true; 1436 common->fsm_state = FSM_CARD_NOT_READY; 1437 common->iface_down = true; 1438 1439 rsi_sdio_enable_interrupts(pfunction); 1440 1441 rsi_dbg(INFO_ZONE, "***** RSI module thaw done *****\n"); 1442 1443 return 0; 1444 } 1445 1446 static void rsi_shutdown(struct device *dev) 1447 { 1448 struct sdio_func *pfunction = dev_to_sdio_func(dev); 1449 struct rsi_hw *adapter = sdio_get_drvdata(pfunction); 1450 struct rsi_91x_sdiodev *sdev = adapter->rsi_dev; 1451 struct ieee80211_hw *hw = adapter->hw; 1452 1453 rsi_dbg(ERR_ZONE, "SDIO Bus shutdown =====>\n"); 1454 1455 if (hw && hw->wiphy && hw->wiphy->wowlan_config) { 1456 if (rsi_config_wowlan(adapter, hw->wiphy->wowlan_config)) 1457 rsi_dbg(ERR_ZONE, "Failed to configure WoWLAN\n"); 1458 } 1459 1460 if (IS_ENABLED(CONFIG_RSI_COEX) && adapter->priv->coex_mode > 1 && 1461 adapter->priv->bt_adapter) { 1462 rsi_bt_ops.detach(adapter->priv->bt_adapter); 1463 adapter->priv->bt_adapter = NULL; 1464 } 1465 1466 rsi_sdio_disable_interrupts(sdev->pfunction); 1467 1468 if (sdev->write_fail) 1469 rsi_dbg(INFO_ZONE, "###### Device is not ready #######\n"); 1470 1471 rsi_dbg(INFO_ZONE, "***** RSI module shut down *****\n"); 1472 } 1473 1474 static int rsi_restore(struct device *dev) 1475 { 1476 struct sdio_func *pfunction = dev_to_sdio_func(dev); 1477 struct rsi_hw *adapter = sdio_get_drvdata(pfunction); 1478 struct rsi_common *common = adapter->priv; 1479 1480 rsi_dbg(INFO_ZONE, "SDIO Bus restore ======>\n"); 1481 common->hibernate_resume = true; 1482 common->fsm_state = FSM_FW_NOT_LOADED; 1483 common->iface_down = true; 1484 1485 adapter->sc_nvifs = 0; 1486 adapter->ps_state = PS_NONE; 1487 1488 common->wow_flags = 0; 1489 common->iface_down = false; 1490 1491 rsi_dbg(INFO_ZONE, "RSI module restored\n"); 1492 1493 return 0; 1494 } 1495 static const struct dev_pm_ops rsi_pm_ops = { 1496 .suspend = rsi_suspend, 1497 .resume_noirq = rsi_resume, 1498 .freeze = rsi_freeze, 1499 .thaw = rsi_thaw, 1500 .restore = rsi_restore, 1501 }; 1502 #endif 1503 1504 static const struct sdio_device_id rsi_dev_table[] = { 1505 { SDIO_DEVICE(SDIO_VENDOR_ID_RSI, SDIO_DEVICE_ID_RSI_9113) }, 1506 { SDIO_DEVICE(SDIO_VENDOR_ID_RSI, SDIO_DEVICE_ID_RSI_9116) }, 1507 { /* Blank */}, 1508 }; 1509 1510 static struct sdio_driver rsi_driver = { 1511 .name = "RSI-SDIO WLAN", 1512 .probe = rsi_probe, 1513 .remove = rsi_disconnect, 1514 .id_table = rsi_dev_table, 1515 #ifdef CONFIG_PM 1516 .drv = { 1517 .pm = &rsi_pm_ops, 1518 .shutdown = rsi_shutdown, 1519 } 1520 #endif 1521 }; 1522 module_sdio_driver(rsi_driver); 1523 1524 MODULE_AUTHOR("Redpine Signals Inc"); 1525 MODULE_DESCRIPTION("Common SDIO layer for RSI drivers"); 1526 MODULE_DEVICE_TABLE(sdio, rsi_dev_table); 1527 MODULE_FIRMWARE(FIRMWARE_RSI9113); 1528 MODULE_VERSION("0.1"); 1529 MODULE_LICENSE("Dual BSD/GPL"); 1530