1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* Copyright(c) 2009-2012 Realtek Corporation.*/ 3 4 #ifndef __RTL_USB_H__ 5 #define __RTL_USB_H__ 6 7 #include <linux/skbuff.h> 8 9 #define RTL_RX_DESC_SIZE 24 10 11 #define RTL_USB_DEVICE(vend, prod, cfg) \ 12 .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ 13 .idVendor = (vend), \ 14 .idProduct = (prod), \ 15 .driver_info = (kernel_ulong_t)&(cfg) 16 17 #define USB_HIGH_SPEED_BULK_SIZE 512 18 #define USB_FULL_SPEED_BULK_SIZE 64 19 20 #define RTL_USB_MAX_TXQ_NUM 4 /* max tx queue */ 21 #define RTL_USB_MAX_EP_NUM 6 /* max ep number */ 22 #define RTL_USB_MAX_TX_URBS_NUM 8 23 24 enum rtl_txq { 25 /* These definitions shall be consistent with value 26 * returned by skb_get_queue_mapping 27 *------------------------------------*/ 28 RTL_TXQ_BK, 29 RTL_TXQ_BE, 30 RTL_TXQ_VI, 31 RTL_TXQ_VO, 32 /*------------------------------------*/ 33 RTL_TXQ_BCN, 34 RTL_TXQ_MGT, 35 RTL_TXQ_HI, 36 37 /* Must be last */ 38 __RTL_TXQ_NUM, 39 }; 40 41 struct rtl_ep_map { 42 u32 ep_mapping[__RTL_TXQ_NUM]; 43 }; 44 45 struct _trx_info { 46 struct rtl_usb *rtlusb; 47 u32 ep_num; 48 }; 49 50 static inline void _rtl_install_trx_info(struct rtl_usb *rtlusb, 51 struct sk_buff *skb, 52 u32 ep_num) 53 { 54 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); 55 56 info->rate_driver_data[0] = rtlusb; 57 info->rate_driver_data[1] = (void *)(__kernel_size_t)ep_num; 58 } 59 60 /* Add suspend/resume later */ 61 enum rtl_usb_state { 62 USB_STATE_STOP = 0, 63 USB_STATE_START = 1, 64 }; 65 66 #define IS_USB_STOP(rtlusb_ptr) (USB_STATE_STOP == (rtlusb_ptr)->state) 67 #define IS_USB_START(rtlusb_ptr) (USB_STATE_START == (rtlusb_ptr)->state) 68 #define SET_USB_STOP(rtlusb_ptr) \ 69 do { \ 70 (rtlusb_ptr)->state = USB_STATE_STOP; \ 71 } while (0) 72 73 #define SET_USB_START(rtlusb_ptr) \ 74 do { \ 75 (rtlusb_ptr)->state = USB_STATE_START; \ 76 } while (0) 77 78 struct rtl_usb { 79 struct usb_device *udev; 80 struct usb_interface *intf; 81 enum rtl_usb_state state; 82 83 /* Bcn control register setting */ 84 u32 reg_bcn_ctrl_val; 85 /* for 88/92cu card disable */ 86 u8 disablehwsm; 87 /*QOS & EDCA */ 88 enum acm_method acm_method; 89 /* irq . HIMR,HIMR_EX */ 90 u32 irq_mask[2]; 91 bool irq_enabled; 92 93 u16 (*usb_mq_to_hwq)(__le16 fc, u16 mac80211_queue_index); 94 95 /* Tx */ 96 u8 out_ep_nums ; 97 u8 out_queue_sel; 98 struct rtl_ep_map ep_map; 99 100 u32 max_bulk_out_size; 101 u32 tx_submitted_urbs; 102 struct sk_buff_head tx_skb_queue[RTL_USB_MAX_EP_NUM]; 103 104 struct usb_anchor tx_pending[RTL_USB_MAX_EP_NUM]; 105 struct usb_anchor tx_submitted; 106 107 struct sk_buff *(*usb_tx_aggregate_hdl)(struct ieee80211_hw *, 108 struct sk_buff_head *); 109 int (*usb_tx_post_hdl)(struct ieee80211_hw *, 110 struct urb *, struct sk_buff *); 111 void (*usb_tx_cleanup)(struct ieee80211_hw *, struct sk_buff *); 112 113 /* Rx */ 114 u8 in_ep_nums; 115 u32 in_ep; /* Bulk IN endpoint number */ 116 u32 rx_max_size; /* Bulk IN max buffer size */ 117 u32 rx_urb_num; /* How many Bulk INs are submitted to host. */ 118 struct usb_anchor rx_submitted; 119 struct usb_anchor rx_cleanup_urbs; 120 struct tasklet_struct rx_work_tasklet; 121 struct sk_buff_head rx_queue; 122 void (*usb_rx_segregate_hdl)(struct ieee80211_hw *, struct sk_buff *, 123 struct sk_buff_head *); 124 void (*usb_rx_hdl)(struct ieee80211_hw *, struct sk_buff *); 125 }; 126 127 struct rtl_usb_priv { 128 struct bt_coexist_info bt_coexist; 129 struct rtl_usb dev; 130 }; 131 132 #define rtl_usbpriv(hw) (((struct rtl_usb_priv *)(rtl_priv(hw))->priv)) 133 #define rtl_usbdev(usbpriv) (&((usbpriv)->dev)) 134 135 int rtl_usb_probe(struct usb_interface *intf, 136 const struct usb_device_id *id, 137 struct rtl_hal_cfg *rtl92cu_hal_cfg); 138 void rtl_usb_disconnect(struct usb_interface *intf); 139 int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message); 140 int rtl_usb_resume(struct usb_interface *pusb_intf); 141 142 #endif 143